High levels of indium exposure relate to progressive emphysematous changes: a 9-year longitudinal surveillance of indium workers

Research advance of occupational exposure risks and toxic effects of semiconductor nanomaterials

In recent years, semiconductor nanomaterials, as one of the most promising and applied classes of engineered nanomaterials, have been widely used in industries such as photovoltaics, electronic devices, and biomedicine. However, occupational exposure is unavoidable during the production, use, and disposal stages of products containing these materials, thus posing potential health risks to workers. The intricacies of the work environment present challenges in obtaining comprehensive data on such exposure. Consequently, there remains a significant gap in understanding the exposure risks and toxic effects associated with semiconductor nanomaterials. This paper provides an overview of the current classification and applications of typical semiconductor nanomaterials. It also delves into the existing state of occupational exposure, methodologies for exposure assessment, and prevailing occupational exposure limits. Furthermore, relevant epidemiological studies are examined. Subsequently, the review scrutinizes the toxicity of semiconductor nanomaterials concerning target organ toxicity, toxicity mechanisms, and influencing factors. The aim of this review is to lay the groundwork for enhancing the assessment of occupational exposure to semiconductor nanomaterials, optimizing occupational exposure limits, and promoting environmentally sustainable development practices in this domain.

Associations between serum indium levels and preserved ratio impaired spirometry among non-smoking industrial workers: A nationwide cross-sectional study in Taiwan

BACKGROUND

Indium, a rare heavy metal, extensively used in flat panel display manufacturing, poses potential respiratory health risks to workers. Preserved ratio impaired spirometry (PRISm), a term describing nonobstructive lung function abnormalities, is associated with adverse health outcomes. Despite known risks, the relationship between serum indium levels and PRISm remains underexplored.

METHODS

A cross-sectional cohort study among non-smoking industry workers potentially exposed to indium in Taiwan was conducted in 2020. Demographic data, and pulmonary function tests were collected comprehensively. Serum indium levels were quantified using inductively coupled plasma mass spectrometry, and respiratory symptoms were obtained via questionnaire. PRISm was defined as FEV1/FVC ≥0.7 with FEV1 < 80 % predicted. Univariate, and multivariate logistic regression analyses were conducted to identify risk factors associated with PRISm.

RESULTS

Among 2575 eligible participants, those with abnormal serum indium levels (≥3 ng/mL) were older, predominantly male, and had longer total working duration. PRISm prevalence was significantly higher in individuals with abnormal indium levels (22.7 % vs. 7.6 %). PRISm subjects exhibited a higher proportion of abnormal indium levels. Multivariate analysis revealed that serum indium levels ≥3 ng/mL and female sex were significant risk factors for PRISm after adjusting sex, age, body mass index and working duration.

CONCLUSION

This study demonstrates a significant association between elevated serum indium levels and increased PRISm prevalence among non-smoking workers in Taiwan. Findings highlight the importance of assessing serum indium levels in occupational health surveillance and revising exposure standards to mitigate respiratory health risks associated with indium exposure.

Research progress of KL-6 in respiratory system diseases

This article comprehensively elucidates the discovery of Krebs von den Lungen-6 (KL-6), its structural features, functional mechanisms, and the current research status in various respiratory system diseases. Discovered in 1985, KL-6 was initially considered a tumor marker, but its elevated levels in interstitial lung disease (ILD) led to its recognition as a relevant serum marker for ILD. KL-6 is primarily produced by type 2 alveolar epithelial cell regeneration. Over the past 30 years since the discovery of KL-6, the number of related research papers has steadily increased annually. Following the coronavirus disease 2019 (COVID-19) pandemic, there has been a sudden surge in relevant literature. Despite KL-6's potential as a biomarker, its value in the diagnosis, treatment, and prognosis varies across different respiratory diseases, including ILD, idiopathic pulmonary fibrosis (IPF), COVID-19, and lung cancer. Therefore, as an important serum biomarker in respiratory system diseases, the value of KL-6 still requires further investigation.

Progression of Smoking-Induced Emphysema in a Case with Indium Lung

Recently, it has become clear that inhaled indium-tin oxide causes emphysematous as well as interstitial changes in the lung. Here, we present a 59-year-old male ex-smoker, quitting smoking at the age of 55. He had been engaged in indium-tin oxide processing from 27 to 37 years of age, with 22 years having passed since the final exposure to indium. He was found to have a high serum indium concentration and Krebs von den Lungen-6 (KL-6). Furthermore, bilateral centrilobular emphysema was recognized in high-resolution computed tomography (HRCT). After transferring jobs to a non-indium-tin oxide section, KL-6 returned to a normal level within 4 years, whereas neither serum indium concentration nor emphysema had decreased to normal despite 22 years having passed since the exposure ended. At the age of 59, a thoracoscopic lung biopsy was performed to assess the contribution of smoking and that of indium to the lung destruction. The pathological findings demonstrated cholesterol granulomas with the accumulation of macrophages and multinucleated giant cells that had phagocytosed particles. Together with the typical findings of indium lung, fibrotic and emphysematous changes were observed. The elemental analysis of the biopsied specimens revealed excessive deposition of indium throughout the airways, interstitial spaces and alveoli. The pathological findings of this case may be the result of two kinds of pulmonary damage, i.e., smoking and indium. This report indicates that occupationally-inhaled indium could remain in the lung for as long as 22 years and continue to insult the lung tissue with inflammation caused by smoking.

A case report of Indium lung with progressive emphysema and fibrosis underwent lung unilateral transplantation 20 years after the end of the exposure

BACKGROUND

Indium lung is characterized by interstitial pneumonia and/or emphysema which occurs in indium-tin oxide (ITO) workers. Indium lung is now known to progress after stopping exposure to ITO, but the long-term influences of ITO remain unclear.

CASE PRESENTATION

Forty seven years old, a never-smoker, who had been engaged in an ITO manufacturing process for 8 years. Emphysema was indicated by the medical check-up for ex-ITO workers, and he was diagnosed with indium lung. He underwent partial lung resections for pneumothorax two times, and obstructive pulmonary dysfunction had progressed through the years. He underwent right single lung transplant 20 years after ITO exposure. Pathologically, his lung showed severe distal acinar emphysema and honeycomb change. Fibrosis and destruction of the lung tissue significantly progressed compared to the previous partial resections. Scanning electron microscopy combined with energy dispersive spectroscopy revealed that the deposited particles contained indium and tin. After the transplantation, his respiratory function was improved.

CONCLUSIONS

In this case, ITO resided in the lung tissue for 20 years, and lung tissue destruction kept progressing. Careful medical follow-up is recommended for ITO-workers even if they are asymptomatic.

Pathological Comparison of Rat Pulmonary Models Induced by Silica Nanoparticles and Indium-Tin Oxide Nanoparticles

Purpose

The objective of this study was to evaluate and compare the histopathological implications of silica nanoparticles (Nano-SiO₂) and indium-tin oxide nanoparticles (Nano-ITO), in vivo.

Methods

Male Sprague-Dawley rats were exposed to Nano-SiO₂ (50 mg/kg) and Nano-ITO (6 mg/kg) by a single intratracheal instillation, respectively. Broncho-alveolar lavage fluid (BALF) and lung tissue were obtained at 7, 14, 28, and 56 days post exposure for analysis of BALF inflammatory factors, total protein, and for lung tissue pathology. Histopathological and ultrastructural change in lungs were investigated by hematoxylin and eosin, Masson’s trichrome, sirius red staining, periodic acid Schiff stain, and transmission electron microscopy. The expression of SP-A, collagen type I and III in lung tissue was determined by immunohistochemistry and ELISA.

Results

The rats in both models exhibited obvious collagen fibrosis and the severity of the lung injury increased with time after exposure to respective dosage increased. Several parameters of pulmonary inflammation and fibrosis significantly increased in both groups, which was reflected by increased LDH activity, total proteins, TNF-α, and IL-6 levels in BALF, and confirmed by histopathological examination. The results also showed that the two models exhibited different features. Exposure to Nano-ITO caused persistent chronic lung inflammation, illustrated by the infiltration of a large amount of enlarged and foamy macrophages and neutrophils into the lung parenchyma. In Nano-SiO₂ exposed rat lung tissue, granulomatous inflammation was most prominent followed by progressive and massive fibrotic nodules. Compared with the Nano-SiO₂ rats, Nano-ITO exposed rats exhibited significantly severe pulmonary alveolar proteinosis (PAP) pathological changes, lower fibrosis, and higher levels of inflammatory biomarkers. However, Nano-SiO₂ exposed rats had greater fibrosis pathological changes and more severe granulomas than Nano-ITO exposed rats.

Conclusion

This study suggests that the Nano-SiO₂-induced model has greater value in research into granulomas and fibrosis, while the Nano-ITO-induced model has greater repeatability in area of PAP.

Two-year follow-up of exposure, engineering controls, respiratory protection and respiratory health among workers at an indium-tin oxide (ITO) production and reclamation facility

OBJECTIVES

To determine whether engineering controls and respiratory protection had measurable short-term impact on indium exposure and respiratory health among current indium-tin oxide production and reclamation facility workers.

METHODS

We documented engineering controls implemented following our 2012 evaluation and recorded respirator use in 2012 and 2014. We measured respirable indium (Inresp) and plasma indium (InP) in 2012 and 2014, and calculated change in Inresp (∆Inresp) and InP (∆InP) by the 13 departments. We assessed symptoms, lung function, serum biomarkers of interstitial lung disease (Krebs von den Lungen (KL)-6 and surfactant protein (SP)-D) and chest high-resolution CT at both time points and evaluated workers who participated in both 2012 and 2014 for changes in health outcomes (new, worsened or improved).

RESULTS

Engineering controls included installation of local exhaust ventilation in both grinding departments (Rotary and Planar) and isolation of the Reclaim department. Respiratory protection increased in most (77%) departments. ∆InP and ∆Inresp often changed in parallel by department. Among 62 workers participating in both 2012 and 2014, 18 (29%) had new or worsening chest symptoms and 2 (3%) had functional decline in lung function or radiographic progression, but average KL-6 and SP-D concentrations decreased, and no cases of clinical indium lung disease were recognised.

CONCLUSIONS

Increased engineering controls and respiratory protection can lead to decreased Inresp, InP and biomarkers of interstitial lung disease among workers in 2 years. Ongoing medical monitoring of indium-exposed workers to confirm the longer-term effectiveness of preventive measures is warranted.

Toxicokinetics and systematic responses of differently sized indium tin oxide (ITO) particles in mice via oropharyngeal aspiration exposure

Indium tin oxide (ITO) is an important semiconductor material, because of increasing commercial products consumption and potentially exposed workers worldwide. So, urgently we need to assess and manage potential health risks of ITO. Although the Occupational Exposure Limit (OEL) has been established for ITO exposure, there is still a lack of distinguishing the risks of exposure to particles of different sizes. Therefore, obtaining toxicological data of small-sized particles will help to improve its risk assessment data. Important questions raised in quantitative risk assessments for ITO particles are whether biodistribution of ITO particles is affected by particle size and to what extent systematic adverse responses is subsequently initiated. In order to determine whether this toxicological paradigm for size is relevant in ITO toxic effect, we performed comparative studies on the toxicokinetics and sub-acute toxicity test of ITO in mice. The results indicate both sized-ITO resided in the lung tissue and slowly excreted from the mice, and the smaller size of ITO being cleared more slowly. Only a little ITO was transferred to other organs, especially with higher blood flow. Two type of ITO which deposit in the lung mainly impacts respiratory system and may injure liver or kidney. After sub-acute exposure to ITO, inflammation featured by neutrophils infiltration and fibrosis with both dose and size effects have been observed. Our findings revealed toxicokinetics and dose-dependent pulmonary toxicity in mice via oropharyngeal aspiration exposure, also replenish in vivo risk assessment of ITO. Collectively, these data indicate that under the current OEL, there are potential toxic effects after exposure to the ITO particles. The observed size-dependent biodistribution patterns and toxic effect might be important for approaching the hazard potential of small-sized ITO in an occupational environment.

Indium kinetics in an indium exposed worker before and after bilateral lung transplantation

Background

A male worker with indium‐tin oxide (ITO)‐induced pneumoconiosis underwent bilateral lung transplantation (LT).

Methods

Post‐LT histopathological investigations of the isolated lungs and hilar lymph nodes were performed and indium concentration in serum (In‐S) and serum Krebs von den Lungen‐6 (KL‐6) were tracked for 122 weeks.

Results

He has attained the ultimate treatment goal of > 2‐year survival. The main histopathological characteristics were pan‐lobular emphysematous change, interstitial fibrosis, and lymphocytic infiltration in the peribronchiolar/perivascular portions, and numerous cholesterol clefts and giant cells containing brown particles. These findings support the conclusion that the lung injury was caused by the inhalation of ITO. Metal element mapping and indium in the isolated lungs revealed that inhaled ITO particles in humans migrate to the lymph nodes. In‐S remained at remarkably high levels (≥30 ng/mL) and showed wide fluctuation with bimodality until 46 weeks after LT, but KL‐6 remained in the normal range for almost the entire period. The indium concentration in the donor's resection lung at 10 weeks after LT was 143.5 ng/g wet‐weight, which was only one one‐thousandth of the recipient's lung (161 µg/g wet‐weight). After 48 weeks of LT, the recipient's In‐S had gradually decreased; the biological half‐life was 1.2 years. These results clearly suggest that indium remaining in the recipient's tissues did not adversely influence the transplant donor's lungs.

Conclusions

The transplanted donor's lungs were not influenced by indium in the recipient's organs. Bilateral LT is thus an effective treatment option in severe indium lung disease cases.

Response to pembrolizumab in a patient with primary lung adenocarcinoma originated from indium lung

Background

Indium is a metal used as a compound called indium-tin oxide for liquid crystal display. Its inhalation causes lung toxicity, resulting in a new occupational lung disease called indium lung. Although the carcinogenicity of indium has been reported in an animal model, its carcinogenicity in humans is unknown.

Case presentation

This is the first reported case of a primary lung cancer originating from indium lung. In this report, we describe a 46-year-old man with interstitial pneumonia-type indium lung diagnosed 16 years ago. The initial symptom was left chest pain, and computed tomography showed a mass adjacent to the aorta with left pleural effusion. Specimens collected using video-assisted thoracoscopy revealed an adenocarcinoma with a high expression of programmed cell death-ligand 1 (cT4N0M1a stage IVA). Although the lesions showed a remarkable aggressive nature, the patient benefited from pembrolizumab, a monoclonal antibody against programmed cell death 1, which was used as second-line therapy for 2 years.

Conclusions

It is important for clinicians to be aware of lung cancer development in indium-exposed workers or in patients with indium lung, as this could have an aggressive behavior. Treatment with immune checkpoint inhibitors is an option even in patients with interstitial pneumonia-type indium lung.

Assessment of Occupational Exposure to Indium Dust for Indium-Tin-Oxide Manufacturing Workers

According to recent research, indium nanoparticles (NPs) are more toxic than micro-sized particles. While cases of indium lung disease have been reported worldwide, very little research has been conducted on the occupational exposure to indium NPs. Recently, an indium-related lung disease was reported in Korea, a global powerhouse for display manufacturing. In this study, we conducted an assessment ofoccupational exposure at an indium tin oxide (ITO) powder manufacturing plant, where the first case of indium lung disease in Korea occurred. Airborne dustwas obtained from a worker's breathing zone, and area sampling in the workplace environment was conducted using real-time monitoring devices. Personal samples were analyzed for the indium concentrations in total dust, respirable dust fraction, and NPs using personal NPs respiratory deposition samplers. The total indium concentration of the personal samples was lower than the threshold limit value recommended by the American Conference of Governmental Industrial Hygienists (ACGIH TLV), which was set as occupational exposure limit (OEL). However, the respirable indium concentration exceeded the recently set ACGIH TLV for the respirable fraction of indium dust. The concentration of indium NPs ranged between 0.003 and 0.010 × 10-2 mg/m3, accounting for only 0.4% of the total and 2.7% of the respirable indium particles. This was attributed to the aggregating of NPs at the µm sub-level. Given the extremely low fraction of indium NPs in the total and respirable dust, the current OEL values, set as the total and respirable indium concentrations, do not holistically represent the occupational exposure to indium NPs or prevent health hazards. Therefore, it is necessary to set separate OEL values for indium NPs. This study covers only the process of handling ITO powder. Therefore, follow-up studies need to be conducted on other ITO sputtering target polishing and milling processes, which typically generate more airborne NPs, to further investigate the effects of indium on workers and facilitate the necessary implementation of indium-reducing technologies.

Imaging diagnosis of classical and new pneumoconiosis: predominant reticular HRCT pattern

Our understanding of the manifestations of pneumoconioses is evolving in recent years. Associations between novel exposures and diffuse interstitial lung disease have been newly recognized. In advanced asbestosis, two types of fibrosis are seen, probably related to dose of exposure, existence of pleural fibrosis, and the host factor status of the individual. In pneumoconiosis of predominant reticular type, nodular opacities are often seen in the early phase. The nodular pattern is centrilobular, although some in metal lung show perilymphatic distribution, mimicking sarcoidosis. High-resolution computed tomography enables a more comprehensive correlation between the pathologic findings and clinically relevant imaging findings. The clinician must understand the spectrum of characteristic imaging features related to both known dust exposures and to historically recent new dust exposures.

Biomonitorization of concentrations of 28 elements in serum and urine among workers exposed to indium compounds

Many studies have documented the abnormal concentrations of metals/metalloids in serum or urine of occupational workers, but no works systematically analysed the concentrations of elements in serum or urine of indium-exposed workers. This study was aimed to assess 28 elements in serum and urine from 57 individuals with occupational exposure to indium and its compounds. Control subjects were 63 workers without metal exposure. We collected information on occupation and lifestyle habits by questionnaire. Biological samples were collected to quantify elements by inductive coupled plasma-mass spectrometer. Air in the breathing zones was drawn at flow rates of 1.5-3 L/min for a sampling period of 6 to 8 h, using a Model BFC-35 pump. The average ambient indium level was 0.078 mg/m3. Serum/urine Indium levels were significantly higher in indium-exposed workers than in controls (P < 0.01). Moreover, serum/urine indium concentrations in the group with 6-14 years and ≥15 years of employment were significantly higher than those with ≤5 employment years(P < 0.05). Ten of the other 27 elements/metals measured were higher in serum/urine in indium-exposed workers compared to the controls (aluminum, beryllium, cadmium, cesium, chromium, lithium, manganese, magnesium, molybdenum and vanadium). Zinc levels in serum/urine were significantly decreased in the indium-exposed workers. Additionally, other elements/metals were higher in one specimen (serum or urine) but lower in the other (Selenium was lower in serum but higher in urine in the indium-exposed workers compared with the controls; likewise Thallium and Rubidium were higher in serum but lower in urine). Linear regression analyses, revealed significant correlations between serum and urine for indium, aluminum, arsenic, barium, cadmium, cesium, cobalt, selenium, silver, and zinc (P < 0.05). These data suggest that occupational exposure to indium and its compounds may disturb the homeostasis of trace elements in systemic circulation, indium concentrations in serum or urine appear reflective of workers' exposure to ambient indium and their years of working, respectively. The serum/urine levels of essential metals are modified by exposure to indium in occupationally exposed workers. Further studies including larger sample size and more kinds of biological sample are needed to validate our findings.

Exposure profiles of workers from indium tin oxide target manufacturing and recycling factories in Taiwan

Indium tin oxide exposure poses a potential health risk, but the exposure assessment in occupational setting remains incomplete and continues to be a significant challenge. To this end, we investigated the association of work type, airborne indium concentration, respirable fraction of total indium, and cumulative indium exposure index (CEI) with the levels of plasma indium (P-In) and urinary indium (U-In) among 302 indium tin oxide target manufacturing and recycling workers in Taiwan. We observed that recycling-crushing produced the highest concentrations of total indium (area: 2084.8 μg/m³; personal: 3494.5 μg/m³) and respirable indium (area: 533.4 μg/m³; personal: 742.0 μg/m³). Powdering produced the highest respirable fraction of total indium (area: 58.6%; personal: 81.5%), where the workers had the highest levels of P-In (geometric mean: 2.0 μg/L) and U-In (1.0 μg/g creatinine). After adjusting for the confounder, the CEIs of powdering (β_PR = 0.78; β_PR = 0.44), bonding (β_PT = 0.61; β_PT = 0.37), and processing workers (β_PT = 0.43; β_PT = 0.28) showed significant associations with P-In and U-In, validating its utility in monitoring the exposure. Also, the respirable fraction of total indium significantly contributed to the increased levels of P-In and U-In among workers. The varying levels of relationship noted between indium exposure and the levels of P-In and U-In among workers with different work types suggested that setting the exposure limits among different work types is warranted.

Indium concentration in serum is an excellent predictor for assessing accumulated indium concentration in the lungs

OBJECTIVE

To clarify whether indium in serum (In-S) is an appropriate parameter for assessing accumulated indium concentration in the lungs (In-L).

METHODS

During our approximately 15-year Japanese cohort follow-up, five male indium-tin oxide (ITO) or/and indium trioxide-exposed workers underwent lung surgical procedures to treat lung diseases or to confirm a diagnosis of lung impairments. We measured In-L of these Cases 1-5 and were able to assess the relationship between In-L and the most recent In-S. Another 1 Japanese case (Case 6) exposed to indium trioxide and indium hydroxide was referred from an article.

RESULTS

Cases 1 and 3 had lung cancer, Case 2 suffered from recurrent pneumothorax, and Case 4 had interstitial pneumonia with mild emphysema. Case 5 had severe emphysema with pulmonary hypertension and underwent bilateral lung transplantation. In Cases 1-5, In-L and In-S ranged from 3.4 to 161.2 µg/g wet weight and 0.7 to 60.4 ng/mL, respectively, and In-L/In-S ratios ranged from 2484 to 4857. The slope of the single regression equation with zero intercept was 2767 and the correlation coefficient was 0.995. In contrast, Case 6 was extraordinarily outlying, but the reason is unclear.

CONCLUSIONS

In-S is an excellent predictor for assessing indium load in the lungs in ITO or/and indium trioxide-exposed workers. However, number of cases was only five and not enough to authorize definite conclusion. It is desirable to add more cases to confirm our conclusion.

Radiographic diagnosis of Pneumoconioses by AIR Pneumo-trained physicians: Comparison with low-dose thin-slice computed tomography

OBJECTIVES

The Asian Intensive Reader of Pneumoconiosis (AIR Pneumo) is a training program designed to improve diagnostic skills for chest radiographies (CXRs) in accordance with the ILO/ICRP 2000. The purpose was to determine the prevalence of occupational environmental pulmonary disease findings in construction workers on thin-slice computed tomography (thin-slice CT), and to compare the diagnostic performance with CXR evaluated by AIR Pneumo-trained physicians.

METHODS

Ninety-seven male construction workers underwent low-dose thin-slice CT and CXR on the same day. NIOSH B reader and a board-certified radiologist each interpreted the thin-slice CTs independently. The concordant findings on thin-slice CT were established as the reference standard and were statistically compared with CXRs. Four physicians interpreted CXRs independently according to the ILO/ICRP 2000.

RESULTS

Of the 97 cases, nine showed irregular or linear opacities, and 44 had pleural plaques on thin-slice CT. Five, four, three, and two of nine cases with irregular opacity were detected by the four readers on CXRs, respectively. Sixteen, 14, 9, and 5 of the 44 cases with pleural plaques were detected by the four readers, respectively. Specificities for irregular opacities ranged from 94% to 100%, and those for pleural plaques were from 86% to 96%.

CONCLUSIONS

Thin-slice CT-detected irregular opacity was found in 9.3%, whereas pleural plaque was found in 45.4% among the construction workers. Chest radiography showed acceptable performance in classifying pneumoconiotic opacities according to ILO/ICRP 2000 by the AIR Pneumo and/or NIOSH-certified physicians.

Case reports of indium lung disease in Taiwan

The production of indium-tin oxide has increased in the past decades due to the increased manufacture of liquid crystal displays (LCD). Taiwan is one of the highest indium-consuming countries worldwide. After repeated inhalation, indium oxide (In₂O₃) particles would accumulate in the lungs, resulting in severe lung effects. We report two workers of an LCD producing facility with elevated serum indium level up to 149 and 73.8 μg/L (normal value <3.5 μg/L), which was much higher than that observed in previous case reports in Taiwan. We collected their detailed working history, symptoms, pulmonary function, radiologic findings, and followed up for more than one year. We also performed workplace evaluation of the facility. We observed that sandblasters who clean components of ITO thin-film production machinery by sandblasting with aluminum oxide tend to have higher indium exposure with worse pulmonary functions and HRCT findings.

Indium oxide nanoparticles induce lung intercellular toxicity between bronchial epithelial cells and macrophages

Concerns have been raised over the safety and health of industrial workers exposed to indium oxide nanoparticles (IO-NPs) when working. IO-NPs were previously shown in vitro and in vivo to be cytotoxic, but the mechanism of pathogenesis was unclear. In this study, the effects of IO-NPs on lung cells associated with respiratory and immune barriers and the toxic effects of intercellular cascades were studied. Here IO-NPs had acute toxicity to Wistar rats over a time course (5 days post-intratracheal instillation). Following treatment epithelial cells (16HBE) or macrophages (RAW264.7) with IO-NPs or IO fine particles (IO-FPs), the damage of 16HBE cells caused by IO-NPs was serious, mainly in the mitochondrial and rough endoplasmic reticulum. The lactate dehydrogenase level also showed that cytotoxicity in vitro was more serious for IO-NPs compared with IO-FPs. The level of In³⁺ (examined by inductively coupled plasma mass spectrometry) in 16HBE cells was 10 times higher than that in RAW cells. In³⁺ , releasing from IO-NPs absorbed by 16HBE cells, could not only significantly inhibit the phagocytosis and migration of macrophages (P < .0001), but also stimulate RAW cells to secrete high levels of inflammatory cytokines. IO-NPs can directly damage pulmonary epithelial cells. The In³⁺ released by epithelial cells affect the phagocytosis and migration of macrophages, which may be a new point for the decrease in the clearance of alveolar surfactants and the development of IO-related pulmonary alveolar proteinosis.

Effects of indium exposure on respiratory symptoms: a retrospective cohort study in Japanese workers using health checkup data

BACKGROUND

Indium compounds are known health hazards for lung cancer and interstitial pneumonia. Furthermore, they are related to emphysema, alveolar proteinosis, and cholesterol granuloma. In Japan, laws were revised in 2013 to tighten regulations on indium exposure in workplaces. However, its impact on the health of workers who handle indium has not been evaluated. This study aimed to investigate whether subjective respiratory symptoms in these workers have reduced after the 2013 amendment in the regulations.

METHODS

The subjects were workers from certain areas of Japan who had undergone health checkups between January 1, 2013, and June 30, 2015. Indium-handling and non-handling workers were categorized into the exposed and less-exposed groups, respectively. Based on the findings of health checkups during this period, the hazard ratio of subjective respiratory symptoms (cough, sputum production, shortness of breath, and palpitation) and its 95% confidence intervals (CIs) were calculated with the less-exposed group as the reference. The Prentice-Williams-Peterson model was used for calculation, and a model that adjusted for coarse analysis and potential confounding factors was adopted.

RESULTS

Overall, 2,561 workers (from 22 companies) who underwent 6,033 health checkups were included. The total person-years were 2,562.8 years, and 162 outcome events occurred. The hazard ratios of the exposed group were 1.65 (95% CI [1.14-2.39]: p = 0.008) and 1.61 (95% CI [1.04-2.50]: p = 0.032) in the crude and adjusted models, respectively.

CONCLUSION

Indium-handling workers had a high hazard of the subjective respiratory symptoms than non-indium -handling workers despite stricter regulations on indium exposure in workplaces. This indicates the need for further changes to the legislation to protect the health of workers exposed to harmful substances in workplaces. Further studies including larger diverse cohorts are needed to validate our findings.

Indium Lung: Discovery, Pathophysiology and Prevention

Indium is mainly used as indium-tin oxide (ITO), which has a unique character of transparency, and is a requisite in making liquid crystal displays. Pulmonary toxicity of indium compounds in humans were not recognized until the last 2 decades. Several initial human cases of indium-related lung disease, named indium lung, were reported in Japan, with their main pathologic findings being interstitial pneumonia, emphysema and cholesterol crystals-containing granulomas. In 2010, three cases with alveolar proteinosis were reported from the United States and China. As of March 2019, more than 10 cases of interstitial pneumonia-dominant indium lung have been reported. Cross-sectional studies in indium workers indicate that the serum indium concentration (sIn) is closely related to the exposure period, the extent of interstitial as well as emphysematous changes of the lung on high-resolution computed tomography (HRCT) and serum biomarkers of interstitial pneumonia, including KL-6 and surfactant protein-D (SP-D). Longitudinal studies have shown it is possible to reduce the sIn as well as the interstitial shadows on HRCT; however, emphysematous lesions increased progressively in heavily exposed workers, even after cessation of exposure. Early detection is required to prevent irreversible changes. The first case of lung cancer associated with indium lung developed in a nonsmoking ex-worker. He had been diagnosed with indium lung and stopped working in indium processing 17 years before. This suggested there is a need for appropriate screening to detect for complications of lung cancer at early stages for those with indium lung.

Occupational Lung Disease

Occupational exposures are a major cause of lung disease and disability worldwide. This article reviews the broad range of types of occupational lung diseases, including airways disease, pneumoconioses, and cancer. Common causes of occupational lung disease are reviewed with specific examples and clinical features. Emphasis on the importance of a detailed history to make an accurate diagnosis of an occupational lung disease is discussed.

Update of occupational lung disease

Objective

Occupational Lung Disease is an oldest but still a biggest problem in occupational health.

Methods

Steering Committee members of the Japan Society for Occupational Health (JSOH) Occupational Lung Disease Study Group selected and summarized current topics on occupational lung diseases based on expert opinion, as informed by governmental regulation, public health concerns, and frequently discussed in related academic conferences.

Results

The topics included in this review are professional education in medical screening skills, 2014 update of Helsinki Criteria, respiratory diseases found in the earthquake and tsunami affected regions, newly recognized occupational lung diseases, and potential respiratory health hazards.

Discussions

Although occupational lung diseases seem to stay as one of the major concerns in occupational health, screening tools and control measures are standardized for the better prevention of the diseases. As this health problem usually occurs in where the most actively economically developing area is, the patients tend to increase in emerging economic powers with huge population.

Possibility of lung cancer risk in indium-exposed workers: An 11-year multicenter cohort study

Background

We established a causal relationship between indium exposure and lung interstitial and emphysematous effects. Lung cancer has been clearly demonstrated in rats and mice exposed to indium phosphide and in rats exposed to indium tin oxide. However, no information is available on human indium‐related lung cancer.

Methods

The baseline studies were conducted on 381 indium‐exposed and 150 referent workers in 11 factories from 2003 to 2006. Items examined included indium concentration in serum (In‐S), occupational history, Krebs von den Lungen‐6 (KL‐6), chest high‐resolution computed tomography (HRCT), medical history, smoking habits, and subjective symptoms. Subjects received follow‐up health checkups, and a total of 220 indium‐exposed and 26 nonexposed workers were examined at least once with chest HRCT from 2013 to 2018.

Results

Four lung cancer cases were identified only in indium‐exposed workers. Two were prevalent cases and two were incident cases. The averages (range) of age (years), exposure duration (years), In‐S (μg/L), and KL‐6 (U/mL) at the baseline survey were 58 (50‐74), 1.7 (0.3‐4.8), 3.1 (0.3‐9.7), and 663 (414‐942). The mean (range) latency from initial indium exposure was 5.3 (0.4‐11) years. The HRCT findings in two incident cases were mild interstitial/emphysematous change and mild interstitial change. The standardized incidence ratio (SIR) of the incident cases was 1.89 (95%CI 0.52‐6.88).

Conclusions

Although the SIR was not statistically significant, there was an undeniable possibility of indium‐related lung cancer due to the short follow‐up duration being insufficient to disclose lung cancer and the small number of lung cancer cases. Further follow‐up is necessary.

The toxicology of indium oxide

Indium oxide (In₂O₃) is a technologically important semiconductor essentially used, doped with tin oxide, to form indium tin oxide (ITO). It is poorly soluble in all so far tested physiologic media. After repeated inhalation, In₂O₃ particles accumulate in the lungs. Their mobilization can cause significant systemic exposure over long periods of time. An increasing number of cases of severe lung effects (characterized by pulmonary alveolar proteinosis, emphysema and/or interstitial fibrosis) in workers of the ITO industry warrants a review of the toxicological hazards also of In₂O₃. The database on acute and chronic toxicity/carcinogenicity/genotoxicity/reproductive toxicity as well skin/eye irritation and sensitization is very limited or even lacking. Short-term and subchronic inhalation studies in rats and mice revealed persistent alveolar proteinosis, inflammation and early indicators of fibrosis in the lungs down to concentrations of 1 mg/m³. Epidemiological and medical surveillance studies, serum/blood indium levels in workers as well as data on the exposure to airborne indium concentrations indicate a need for measures to reduce exposure at In₂O₃ workplaces.

Application of the ICRP respiratory tract model to estimate pulmonary retention of industrially sampled indium-containing dusts

Inhalation of indium-containing dusts is associated with the development of indium lung disease. Workers may be exposed to several different chemical forms of indium; however, their lung dosimetry is not fully understood. We characterized the physicochemical properties and measured the lung dissolution kinetics of eight indium-containing dusts. Indium dissolution rates in artificial lung fluids spanned two orders of magnitude. We used the International Commission on Radiological Protection (ICRP) human respiratory model (HRTM) to estimate pulmonary indium deposition, retention and biokinetic clearance to blood. For a two-year (median workforce tenure at facility) exposure to respirable-sized particles of the indium materials, modeled indium clearance (>99.99% removed) from the alveolar-interstitial compartment was slow for all dusts; salts would clear in 4 years, sintered indium-tin oxide (ITO) would clear in 9 years, and indium oxide would require 48 years. For this scenario, the ICRP HRTM predicted that indium translocated to blood would be present in that compartment for 3.5-18 years after cessation of exposure, depending on the chemical form. For a 40-year exposure (working lifetime), clearance from the alveolar-interstitial compartment would require 5, 10 and 60 years for indium salts, sintered ITO and indium oxide, respectively and indium would be present in blood for 5-53 years after exposure. Consideration of differences in chemical forms of indium, dissolution rates, alveolar clearance and residence time in blood should be included in exposure assessment and epidemiological studies that rely on measures of total indium in air or blood to derive risk estimates.

Personal indium exposure concentration in respirable dusts and serum indium level

The aim of this study was to assess the relationship between indium exposure concentration in the respirable dust fraction (In-E) and indium in serum (In-S) in workers.

METHODS

A total of 39 workers were studied. The study subjects were categorized into 3 groups, namely, smelting workers (n=7), ITO workers (n=6) in an ITO grinding plant, and other workers (n=26). In-E and In-S ranged from 0.004-24.0 μg/m³ and 0.1-8.50 μg/L, respectively. The simple regression equation was log(In-S)=0.322×log(In-E)-0.443. The simple correlation coefficients for the smelting workers, ITO workers and other workers were 0.489, 0.812 and 0.163, respectively. The differences in the relationships among the three groups suggest that In-S may vary with the chemical form to which the workers were exposed. In-E and In-S seem to be positively correlated. The correlation coefficient was higher for both smelting and ITO workers than for other workers.

Solubility of indium-tin oxide in simulated lung and gastric fluids: Pathways for human intake

From being a metal with very limited natural distribution, indium (In) has recently become disseminated throughout the human society. Little is known of how In compounds behave in the natural environment, but recent medical studies link exposure to In compounds to elevated risk of respiratory disorders. Animal tests suggest that exposure may lead to more widespread damage in the body, notably the liver, kidneys and spleen. In this paper, we investigate the solubility of the most widely used In compound, indium-tin oxide (ITO) in simulated lung and gastric fluids in order to better understand the potential pathways for metals to be introduced into the bloodstream. Our results show significant potential for release of In and tin (Sn) in the deep parts of the lungs (artificial lysosomal fluid) and digestive tract, while the solubility in the upper parts of the lungs (the respiratory tract or tracheobronchial tree) is very low. Our study confirms that ITO is likely to remain as solid particles in the upper parts of the lungs, but that particles are likely to slowly dissolve in the deep lungs. Considering the prolonged residence time of inhaled particles in the deep lung, this environment is likely to provide the major route for uptake of In and Sn from inhaled ITO nano- and microparticles. Although dissolution through digestion may also lead to some uptake, the much shorter residence time is likely to lead to much lower risk of uptake.

An advanced case of indium lung disease with progressive emphysema

Objectives:

To report the occurrence of an advanced case of indium lung disease with severely progressive emphysema in an indium-exposed worker.

Case report:

A healthy 42-year-old male smoker was employed to primarily grind indium-tin oxide (ITO) target plates, exposing him to indium for 9 years (1998-2008). In 2004, an epidemiological study was conducted on indium-exposed workers at the factory in which he worked. The subject's serum indium concentration (In-S) was 99.7 μg/l, while his serum Krebs von den Lungen-6 level was 2,350 U/ml. Pulmonary function tests showed forced vital capacity (FVC) of 4.17 l (91.5% of the JRS predicted value), forced expiratory volume in 1 s (FEV₁) of 3.19 l (80.8% of predicted), and an FEV₁-to-FVC ratio of 76.5%. A high-resolution chest computed tomography (HRCT) scan showed mild interlobular septal thickening and mild emphysematous changes. In 2008, he was transferred from the ITO grinding workplace to an inspection work section, where indium concentrations in total dusts had a range of 0.001-0.002 mg/m³. In 2009, the subject's In-S had increased to 132.1 μg/l, and pulmonary function tests revealed obstructive changes. In addition, HRCT scan showed clear evidence of progressive lung destruction with accompanying severe centrilobular emphysema and interlobular septal thickening in both lung fields. The subject's condition gradually worsened, and in 2015, he was registered with the Japan Organ Transplant Network for lung transplantation (LTx).

Conclusions:

Heavy indium exposure is a risk factor for emphysema, which can lead to a severity level that requires LTx as the final therapeutic option.

Comparing plasma, serum and whole blood indium concentrations from workers at an indium-tin oxide (ITO) production facility

OBJECTIVE

Occupational exposure to indium compounds including indium-tin oxide (ITO) can result in potentially fatal indium lung disease. We compared plasma, serum and whole blood indium concentrations (In_P, In_S and In_B) from workers at a single ITO production facility to assess the comparability of these matrices used for biological monitoring of indium exposure.

METHOD

In_P, In_S and In_B were measured using inductively coupled mass spectrometry from consenting workers at an ITO production facility with specimen collection occurring during June-July 2014. Matched pairs from workers were assessed to determine the matrix relationships using the Pearson correlation, paired t-tests, per cent difference, linear regression and κ statistics.

RESULTS

Indium matrices were collected from 80 workers. Mean (SD) In_P, In_S and In_B were 3.48 (3.84), 3.90 (4.15) and 4.66 (5.32) mcg/L, respectively. The In_S-In_P difference was 14%; In_S was higher in all but two workers. In_P and In_S were highly correlated (r=>0.99). The In_B-In_S difference was 19%; In_B was higher in 85% of workers. The In_B-In_P difference was 34%; In_B was higher in 66% of workers. In_B was highly correlated with both In_P and In_S (r=0.97 and 0.96, respectively). κ Statistics were 0.84, 0.83 and 0.82 for In_P, In_S and In_B, respectively, for individuals with each matrix ≥1 mcg/L (p<0.01).

CONCLUSIONS

While all matrices were highly correlated, we encourage the use of In_P and In_S to reliably compare studies across different populations using different matrices. The higher per cent difference and increased variability of In_B may limit its utility in comparisons with In_P and In_S in different populations.