Synthetic chromosome platforms in plants

Synthetic minichromosomes in plants: past, present, and promise

The status of engineered mini-chromosomes/artificial chromosomes/synthetic chromosomes in plants is summarized. Their promise is that they provide a means to accumulate foreign genes on an independent entity other than the normal chromosomes, which would facilitate stacking of novel traits in a way that would not be linked to endogenous genes and that would facilitate transfer between lines. Centromeres in plants are epigenetic, and therefore the isolation of DNA underlying centromeres and reintroduction into plant cells will not establish a functional kinetochore, which obviates this approach for in vitro assembly of plant artificial chromosomes. This issue was bypassed by using telomere-mediated chromosomal truncation to produce mini-chromosomes with little more than an endogenous centromere that could in turn be used as a foundation to build synthetic chromosomes. Site-specific recombinases and various iterations of CRISPR-Cas9 editing provide many tools for the development and re-engineering of synthetic chromosomes.

Plant synthetic genomics: Big lessons from the little yeast

Yeast has been extensively studied and engineered due to its genetic amenability. Projects like Sc2.0 and Sc3.0 have demonstrated the feasibility of constructing synthetic yeast genomes, yielding promising results in both research and industrial applications. In contrast, plant synthetic genomics has faced challenges due to the complexity of plant genomes. However, recent advancements of the project SynMoss, utilizing the model moss plant Physcomitrium patens, offer opportunities for plant synthetic genomics. The shared characteristics between P. patens and yeast, such as high homologous recombination rates and dominant haploid life cycle, enable researchers to manipulate P. patens genomes similarly, opening promising avenues for research and application in plant synthetic biology. In conclusion, harnessing insights from yeast synthetic genomics and applying them to plants, with P. patens as a breakthrough, shows great potential for revolutionizing plant synthetic genomics.

Synthetic chromosomes, genomes, viruses, and cells

Synthetic genomics is the construction of viruses, bacteria, and eukaryotic cells with synthetic genomes. It involves two basic processes: synthesis of complete genomes or chromosomes and booting up of those synthetic nucleic acids to make viruses or living cells. The first synthetic genomics efforts resulted in the construction of viruses. This led to a revolution in viral reverse genetics and improvements in vaccine design and manufacture. The first bacterium with a synthetic genome led to construction of a minimal bacterial cell and recoded Escherichia coli strains able to incorporate multiple non-standard amino acids in proteins and resistant to phage infection. Further advances led to a yeast strain with a synthetic genome and new approaches for animal and plant artificial chromosomes. On the horizon there are dramatic advances in DNA synthesis that will enable extraordinary new opportunities in medicine, industry, agriculture, and research.

Engineered minichromosomes in plants

Artificial chromosome platforms are described in plants. Because the function of centromeres is largely epigenetic, attempts to produce artificial chromosomes with plant centromere DNA have failed. The removal of the centromeric sequences from the cell strips off the centromeric histone that is the apparent biochemical marker of centromere activity. Thus, engineered minichromosomes have been produced by telomere mediated chromosomal truncation. The introduction of telomere repeats will cleave the chromosome at the site of insertion and attach the accompanying transgenes in the process. Such truncation events have been documented in maize, Arabidopsis, barley, rice, Brassica and wheat. Truncation of the nonvital supernumerary B chromosome of maize is a favorite target but engineered minichromosomes derived from the normal A chromosomes have also been recovered. Transmission through mitosis of small chromosomes is apparently normal but there is loss during meiosis. Potential solutions to address this issue are discussed. With procedures now well established to produce the foundation for artificial chromosomes in plants, current efforts are directed at building them up to specification using gene stacking methods and editing techniques.

Genetic and epigenetic effects on centromere establishment

Endogenous chromosomes contain centromeres to direct equal chromosomal segregation in mitosis and meiosis. The location and function of existing centromeres is usually maintained through cell cycles and generations. Recent studies have investigated how the centromere-specific histone H3 variant CENP-A is assembled and replenished after DNA replication to epigenetically propagate the centromere identity. However, existing centromeres occasionally become inactivated, with or without change in underlying DNA sequences, or lost after chromosomal rearrangements, resulting in acentric chromosomes. New centromeres, known as neocentromeres, may form on ectopic, non-centromeric chromosomal regions to rescue acentric chromosomes from being lost, or form dicentric chromosomes if the original centromere is still active. In addition, de novo centromeres can form after chromatinization of purified DNA that is exogenously introduced into cells. Here, we review the phenomena of naturally occurring and experimentally induced new centromeres and summarize the genetic (DNA sequence) and epigenetic features of these new centromeres. We compare the characteristics of new and native centromeres to understand whether there are different requirements for centromere establishment and propagation. Based on our understanding of the mechanisms of new centromere formation, we discuss the perspectives of developing more stably segregating human artificial chromosomes to facilitate gene delivery in therapeutics and research.

Novel technologies in doubled haploid line development

haploid inducer line can be transferred (DH) technology can not only shorten the breeding process but also increase genetic gain. Haploid induction and subsequent genome doubling are the two main steps required for DH technology. Haploids have been generated through the culture of immature male and female gametophytes, and through inter- and intraspecific via chromosome elimination. Here, we focus on haploidization via chromosome elimination, especially the recent advances in centromere-mediated haploidization. Once haploids have been induced, genome doubling is needed to produce DH lines. This study has proposed a new strategy to improve haploid genome doubling by combing haploids and minichromosome technology. With the progress in haploid induction and genome doubling methods, DH technology can facilitate reverse breeding, cytoplasmic male sterile (CMS) line production, gene stacking and a variety of other genetic analysis.

Induction of telomere-mediated chromosomal truncation and behavior of truncated chromosomes in Brassica napus

Engineered minichromosomes could be stably inherited and serve as a platform for simultaneously transferring and stably expressing multiple genes. Chromosomal truncation mediated by repeats of telomeric sequences is a promising approach for the generation of minichromosomes. In the present work, direct repetitive sequences of Arabidopsis telomere were used to study telomere-mediated truncation of chromosomes in Brassica napus. Transgenes containing alien Arabidopsis telomere were successfully obtained, and Southern blotting and fluorescence in situ hybridization (FISH) results show that the transgenes resulted in successful chromosomal truncation in B. napus. In addition, truncated chromosomes were inherited at rates lower than that predicted by Mendelian rules. To determine the potential manipulations and applications of the engineered chromosomes, such as the stacking of multiple transgenes and the Cre/lox and FRT/FLP recombination systems, both amenable to genetic manipulations through site-specific recombination in somatic cells, were tested for their ability to undergo recombination in B. napus. These results demonstrate that alien Arabidopsis telomere is able to mediate chromosomal truncation in B. napus. This technology would be feasible for chromosomal engineering and for studies on chromosome structure and function in B. napus.

Telomere-Mediated Chromosomal Truncation for Generating Engineered Minichromosomes in Maize

Minichromosomes have been generated in maize using telomere-mediated truncation. Telomere DNA, because of its repetitive nature, can be difficult to manipulate. The protocols in this unit describe two methods for generating the telomere DNA required for the initiation of telomere-mediated truncation. The resulting DNA can then be used with truncation cassettes for introduction into maize via transformation. © 2016 by John Wiley & Sons, Inc.

Production of Engineered Minichromosome Vectors via the Introduction of Telomere Sequences

Artificial minichromosomes are non-integrating vectors capable of stably maintaining transgenes outside of the main chromosome set. The production of minichromosomes relies on telomere-mediated chromosomal truncation, which involves introducing transgenes and telomere sequences concurrently to the cell to truncate an endogenous chromosomal target. Two methods can be utilized; either the telomere sequences can be incorporated into a binary vector for transformation with Agrobacterium tumefaciens, or the telomere sequences can be co-introduced with transgenes during particle bombardment. In this protocol, the methods required to isolate and introduce telomere sequences are presented. Following the methods presented, standard transformation procedures can be followed to produce minichromosome containing plants.

Artificial Chromosome Preparation in Arabidopsis

In Arabidopsis thaliana, various attempts have been made to create artificial chromosomes as a new tool for cytological and genetic analyses. However, most of the efforts have been unsuccessful until recently. Most eukaryotic chromosomes are linear, and therefore the Arabidopsis artificial chromosomes have also been designed to be linear and to carry the telomere structure at both ends. In contrast, circular artificial chromosomes were successfully created by the Cre/LoxP system combined with Ac/Ds transposon system, on the basis of the discovery that ring minichromosomes are relatively stable and transmissible to the next generations in A. thaliana. Because ring minichromosomes ∼1 to 6 Mb in size have been generated, in this article, the protocol for inducing large chromosomal rearrangements resulting in ring chromosome formation is described. © 2016 by John Wiley & Sons, Inc.

Plant artificial chromosome technology and its potential application in genetic engineering

Genetic engineering with just a few genes has changed agriculture in the last 20 years. The most frequently used transgenes are the herbicide resistance genes for efficient weed control and the Bt toxin genes for insect resistance. The adoption of the first-generation genetically engineered crops has been very successful in improving farming practices, reducing the application of pesticides that are harmful to both human health and the environment, and producing more profit for farmers. However, there is more potential for genetic engineering to be realized by technical advances. The recent development of plant artificial chromosome technology provides a super vector platform, which allows the management of a large number of genes for the next generation of genetic engineering. With the development of other tools such as gene assembly, genome editing, gene targeting and chromosome delivery systems, it should become possible to engineer crops with multiple genes to produce more agricultural products with less input of natural resources to meet future demands.

Haploidization via Chromosome Elimination: Means and Mechanisms

The ability to generate haploids and subsequently induce chromosome doubling significantly accelerates the crop breeding process. Haploids have been induced through the generation of plants from haploid tissues (in situ gynogenesis and androgenesis) and through the selective loss of a parental chromosome set via inter- or intraspecific hybridization. Here, we focus on the mechanisms responsible for this selective chromosome elimination. CENH3, a variant of the centromere-specific histone H3, has been exploited to create an efficient method of haploid induction, and we discuss this approach in some detail. Parallels have been drawn with chromosome-specific elimination, which occurs as a normal part of differentiation and sex determination in many plant and animal systems.

Stable mitotic inheritance of rice minichromosomes in cell suspension cultures

Suspension cell cultures of rice minichromosomes were established. The minichromosomes in suspension cultured cells were mitotically stable and had active gene expression, thus have the potential to be used as gene expression vectors to produce valuable bioactive products. The plant artificial chromosome (PAC) is a novel vector for plant genetic engineering to produce genetically modified crops with multiple transgenes, or to produce valuable bioactive products through the expression of multiple genes or biochemical pathways as a bioreactor. PAC is mainly constructed by engineered minichromosomes through telomere-mediated chromosome truncations. We have constructed rice minichromosomes in a previous study. Thus, the understanding of rice minichromosome inheritance under different culture conditions has potential importance for their utility in future studies and applications. In this study, we performed suspension cultures of three rice minichromosome-containing cell lines, 1004-111, 1008-100 and 1004-011. Two cell lines, 1004-111 and 1008-100, showed typical S growth pattern consisting of a lag phase, an active growing exponential phase and a stationary phase, whereas cell line 1004-011 grew very slowly and eventually died. Both 1004-111 and 1008-100 minichromosomes were stably transmitted in cell suspension cultures without any abnormality. Foreign gene expression was verified from 1004-111 and 1008-100 minichromosomes in suspension cultures. The stable mitotic inheritance of minichromosomes and gene expression from them indicated that rice minichromosomes could be maintained and propagated in cell suspension cultures. This study tested key parameters for suspension cultures of rice cell lines with minichromosomes, and proved in concept the potential for industrial use of PAC vectors as bioreactors.

Engineering of plant chromosomes

Engineered minimal chromosomes with sufficient mitotic and meiotic stability have an enormous potential as vectors for stacking multiple genes required for complex traits in plant biotechnology. Proof of principle for essential steps in chromosome engineering such as truncation of chromosomes by T-DNA-mediated telomere seeding and de novo formation of centromeres by cenH3 fusion protein tethering has been recently obtained. In order to generate robust protocols for application in plant biotechnology, these steps need to be combined and supplemented with additional methods such as site-specific recombination for the directed transfer of multiple genes of interest on the minichromosomes. At the same time, the development of these methods allows new insight into basic aspects of plant chromosome functions such as how centromeres assure proper distribution of chromosomes to daughter cells or how telomeres serve to cap the chromosome ends to prevent shortening of ends over DNA replication cycles and chromosome end fusion.

Engineered minichromosomes in plants

Platforms for the development of synthetic chromosomes in plants have been produced in several species using telomere mediated chromosomal truncation with the simultaneous inclusion of sites that facilitate further additions to the newly generated minichromosome. By utilizing truncated supernumerary or B chromosomes, the output of the genes on the minichromosome can be amplified. Proof of concept experiments have been successful illustrating that minichromosome platforms can be modified in vivo. Engineered minichromosomes can likely be combined with haploid breeding if they are incorporated into inducer lines given that the observations that basically inert chromosomes from haploid inducer lines can be recovered at workable frequencies in otherwise haploid plants. Future needs of synthetic chromosome development are discussed.

Advanced genetic tools for plant biotechnology

Basic research has provided a much better understanding of the genetic networks and regulatory hierarchies in plants. To meet the challenges of agriculture, we must be able to rapidly translate this knowledge into generating improved plants. Therefore, in this Review, we discuss advanced tools that are currently available for use in plant biotechnology to produce new products in plants and to generate plants with new functions. These tools include synthetic promoters, 'tunable' transcription factors, genome-editing tools and site-specific recombinases. We also review some tools with the potential to enable crop improvement, such as methods for the assembly and synthesis of large DNA molecules, plant transformation with linked multigenes and plant artificial chromosomes. These genetic technologies should be integrated to realize their potential for applications to pressing agricultural and environmental problems.