Detection of bacterial endospores in soil by terbium fluorescence

Sensitive quantification of dipicolinic acid from bacterial endospores in soils and sediments

Endospore-forming bacteria make up an important and numerically significant component of microbial communities in a range of settings including soils, industry, hospitals and marine sediments extending into the deep subsurface. Bacterial endospores are non-reproductive structures that protect DNA and improve cell survival during periods unfavourable for bacterial growth. An important determinant of endospores withstanding extreme environmental conditions is 2,6-pyridine dicarboxylic acid (i.e. dipicolinic acid, or DPA), which contributes heat resistance. This study presents an improved HPLC-fluorescence method for DPA quantification using a single 10-min run with pre-column Tb³⁺ chelation. Relative to existing DPA quantification methods, specific improvements pertain to sensitivity, detection limit and range, as well as the development of new free DPA and spore-specific DPA proxies. The method distinguishes DPA from intact and recently germinated spores, enabling responses to germinants in natural samples or experiments to be assessed in a new way. DPA-based endospore quantification depends on accurate spore-specific DPA contents, in particular, thermophilic spores are shown to have a higher DPA content, meaning that marine sediments with plentiful thermophilic spores may require spore number estimates to be revisited. This method has a wide range of potential applications for more accurately quantifying bacterial endospores in diverse environmental samples.

Tb(iii)-doped nanosheets as a fluorescent probe for the detection of dipicolinic acid

A new fluorescent probe based on terbium(iii)-doped nanosheets was designed for detecting low-levels of dipicolinic acid (DPA), a biomarker of bacterial spores. The ability to detect ultra-low concentrations of DPA is therefore of great significance. First, Tb(iii)-doped ytterbium hydroxide nanosheets were obtained by mechanical exfoliation from layered rare-earth hydroxide (LRH) materials. The morphology of the as-synthesized nanosheets was studied by transmission electron microscopy and atomic force microscopy. The Tb(iii)-doped nanosheets are demonstrated to be highly sensitive to DPA, which remarkably enhances Tb(iii) luminescence intensities at a wavelength of 544 nm. Furthermore, Tb(iii) emission increases linearly with DPA concentration. Selectivity studies were conducted by adding different competing aromatic ligands to the sensing solution; however, their fluorescence responses were observed to be negligibly small in comparison with that of DPA. Our findings provide a basis for the application of Tb(iii)-doped nanosheets for accurate, sensitive, and selective monitoring of DPA as a biomarker of anthrax.

Adaptive Strategies in a Poly-Extreme Environment: Differentiation of Vegetative Cells in Serratia ureilytica and Resistance to Extreme Conditions

Poly-extreme terrestrial habitats are often used as analogs to extra-terrestrial environments. Understanding the adaptive strategies allowing bacteria to thrive and survive under these conditions could help in our quest for extra-terrestrial planets suitable for life and understanding how life evolved in the harsh early earth conditions. A prime example of such a survival strategy is the modification of vegetative cells into resistant resting structures. These differentiated cells are often observed in response to harsh environmental conditions. The environmental strain (strain Lr5/4) belonging to Serratia ureilytica was isolated from a geothermal spring in Lirima, Atacama Desert, Chile. The Atacama Desert is the driest habitat on Earth and furthermore, due to its high altitude, it is exposed to an increased amount of UV radiation. The geothermal spring from which the strain was isolated is oligotrophic and the temperature of 54°C exceeds mesophilic conditions (15 to 45°C). Although the vegetative cells were tolerant to various environmental insults (desiccation, extreme pH, glycerol), a modified cell type was formed in response to nutrient deprivation, UV radiation and thermal shock. Scanning (SEM) and Transmission Electron Microscopy (TEM) analyses of vegetative cells and the modified cell structures were performed. In SEM, a change toward a circular shape with reduced size was observed. These circular cells possessed what appears as extra coating layers under TEM. The resistance of the modified cells was also investigated, they were resistant to wet heat, UV radiation and desiccation, while vegetative cells did not withstand any of those conditions. A phylogenomic analysis was undertaken to investigate the presence of known genes involved in dormancy in other bacterial clades. Genes related to spore-formation in Myxococcus and Firmicutes were found in S. ureilytica Lr5/4 genome; however, these genes were not enough for a full sporulation pathway that resembles either group. Although, the molecular pathway of cell differentiation in S. ureilytica Lr5/4 is not fully defined, the identified genes may contribute to the modified phenotype in the Serratia genus. Here, we show that a modified cell structure can occur as a response to extremity in a species that was previously not known to deploy this strategy. This strategy may be widely spread in bacteria, but only expressed under poly-extreme environmental conditions.

Using Infrared Spectroscopy and Multivariate Analysis to Detect Antibiotics' Resistant Escherichia coli Bacteria

Bacterial pathogens are one of the primary causes of human morbidity worldwide. Historically, antibiotics have been highly effective against most bacterial pathogens; however, the increasing resistance of bacteria to a broad spectrum of commonly used antibiotics has become a global health-care problem. Early and rapid determination of bacterial susceptibility to antibiotics has become essential in many clinical settings and, sometimes, can save lives. Currently classical procedures require at least 48 h for determining bacterial susceptibility, which can constitute a life-threatening delay for effective treatment. Infrared (IR) microscopy is a rapid and inexpensive technique, which has been used successfully for the detection and identification of various biological samples; nonetheless, its true potential in routine clinical diagnosis has not yet been established. In this study, we evaluated the potential of this technique for rapid identification of bacterial susceptibility to specific antibiotics based on the IR spectra of the bacteria. IR spectroscopy was conducted on bacterial colonies, obtained after 24 h culture from patients' samples. An IR microscope was utilized, and a computational classification method was developed to analyze the IR spectra by novel pattern-recognition and statistical tools, to determine E. coli susceptibility within a few minutes to different antibiotics, gentamicin, ceftazidime, nitrofurantoin, nalidixic acid, ofloxacin. Our results show that it was possible to classify the tested bacteria into sensitive and resistant types, with success rates as high as 85% for a number of examined antibiotics. These promising results open the potential of this technique for faster determination of bacterial susceptibility to certain antibiotics.

Fluorescent detection of dipicolinic acid as a biomarker of bacterial spores using lanthanide-chelated gold nanoparticles

Gold nanoparticles (GNPs) functionalized with ethylenediamine-lanthanide complexes (Eu-GNPs and Tb-GNPs) were used for the selective fluorescent detection of dipicolinic acid (DPA), a unique biomarker of bacterial spores, in water. Particles were characterized by transmission electron microscopy and zeta potential measurements. The coordination of DPA to the lanthanides resulted in the enhancement of the fluorescence. A selective response to DPA was observed over the nonselective binding of aromatic ligands. The ligand displacement strategy were also employed for the ratiometric fluorescent detection of DPA. 4,4,4-trifluoro-1-(2-naphthyl)-1,3-butanedion (TFNB) was chosen as an antenna to synthesize ternary complexes. The addition of DPA on EuGNP:TFNB ternary complex quenched the initial emission of the complex at 615nm and increased the TFNB emission at 450nm when excited at 350nm. The results demonstrated that the ratiometric fluorescent detection of DPA was achieved by ligand displacement strategy.

Variability in DPA and Calcium Content in the Spores of Clostridium Species

Spores of a number of clostridial species, and their resistance to thermal treatment is a major concern for the food industry. Spore resistance to wet heat is related to the level of spore hydration, which is inversely correlated with the content of calcium and dipicolinic acid (DPA) in the spore core. It is widely believed that the accumulation of DPA and calcium in the spore core is a fundamental component of the sporulation process for all endospore forming species. We have noticed heterogeneity in the heat resistance capacity and overall DPA/calcium content among the spores of several species belonging to Clostridium sensu stricto group: two C. acetobutylicum strains (DSM 792 and 1731), two C. beijerinckii strains (DSM 791 and NCIMB 8052), and a C. collagenovorans strain (DSM 3089). A C. beijerinckii strain (DSM 791) and a C. acetobutylicum strain (DSM 792) display low Ca and DPA levels. In addition, these two species, with the lowest average Ca/DPA content amongst the strains considered, also exhibit minimal heat resistance. There appears to be no correlation between the Ca/DPA content and the phylogenetic distribution of the C. acetobutylicum and C. beijerinckii species based either on the 16S rRNA or the spoVA gene. This finding suggests that a subset of Clostridium sensu stricto species produce spores with low resistance to wet heat. Additionally, analysis of individual spores using STEM-EDS and STXM revealed that DPA and calcium levels can also vary amongst individual spores in a single spore population.

Effect of organic carbon and metal accumulation on the bacterial communities in sulphidogenic sediments

A unique geochemical setting in Lake Cadagno, Switzerland, has led to the accumulation of insoluble metal sulphides in the sedimentary record as the result of past airborne pollution. This offers an exceptional opportunity to study the effect of these metals on the bacterial communities in sediments, and in particular to investigate further the link between metal contamination and an increase in the populations of endospore-forming bacteria observed previously in other metal-contaminated sediments. A decrease in organic carbon and total bacterial counts was correlated with an increase in the numbers of endospores in the oldest sediment samples, showing the first environmental evidence of a decrease in nutrient availability as a trigger of sporulation. Proteobacteria and Firmicutes were the two dominant bacterial phyla throughout the sediment, the former in an area with high sulphidogenic activity, and the latter in the oldest samples. Even though the dominant Firmicutes taxa were stable along the sediment core and did not vary with changes in metal contamination, the prevalence of some molecular species like Clostridium sp. was positively correlated with metal sulphide concentration. However, this cannot be generalized to all endospore-forming species. Overall, the community composition supports the hypothesis of sporulation as the main mechanism explaining the dominance of endospore formers in the deepest part of the sediment core, while metal contamination in the form of insoluble metal sulphide deposits appears not to be linked with sporulation as a mechanism of metal tolerance in this sulphidogenic ecosystem.

Physical Isolation of Endospores from Environmental Samples by Targeted Lysis of Vegetative Cells

Endospore formation is a survival strategy found among some bacteria from the phylum Firmicutes. During endospore formation, these bacteria enter a morpho-physiological resting state that enhances survival under adverse environmental conditions. Even though endospore-forming Firmicutes are one of the most frequently enriched and isolated bacterial groups in culturing studies, they are often absent from diversity studies based on molecular methods. The resistance of the spore core is considered one of the factors limiting the recovery of DNA from endospores. We developed a method that takes advantage of the higher resistance of endospores to separate them from other cells in a complex microbial community using physical, enzymatic and chemical lysis methods. The endospore-only preparation thus obtained can be used for re-culturing or to perform downstream analysis such as tailored DNA extraction optimized for endospores and subsequent DNA sequencing. This method, applied to sediment samples, has allowed the enrichment of endospores and after sequencing, has revealed a large diversity of endospore-formers in freshwater lake sediments. We expect that the application of this method to other samples will yield a similar outcome.

Phenotypic Diversity as a Mechanism to Exit Cellular Dormancy

Microorganisms can facilitate their survival in stressful environments by entering a state of metabolic inactivity or dormancy. However, this state impairs the function of the very sensory systems necessary to detect favorable growth conditions. Thus, how can a metabolically quiescent cell accurately monitor environmental conditions in order to best decide when to exit dormancy? One strategy employed by microbes to deal with changing environments is the generation of phenotypes that may be less well adapted to a current condition but might confer an advantage in the future. This bet-hedging depends on phenotypic diversity in the population, which itself can derive from naturally occurring stochastic differences in gene expression. In the case of metabolic dormancy, a bet-hedging strategy that has been proposed is the "scout model" where cells comprising a fraction of the dormant population reinitiate growth stochastically, independent of environmental cues. Here, we provide experimental evidence that such a mechanism exists in dormant spores produced by the ubiquitous soil bacterium Bacillus subtilis. We observe that these spores reinitiate growth at a low but measureable frequency even in the absence of an inducing signal. This phenomenon is the result of phenotypic variation in the propensity of individual spores to reinitiate growth spontaneously. Since this bet-hedging mechanism produces individuals that will either grow under favorable conditions or die under unfavorable conditions, a population can properly respond to environmental changes despite the impaired sensory ability of individual cells.

Endospore-enriched sequencing approach reveals unprecedented diversity of Firmicutes in sediments

We present a method for the physical isolation of endospores from environmental samples allowing the specific targeting of endospore-forming bacteria for sequencing (endospore-enriched community). The efficiency of the method was tested on lake sediment samples. After 16S rRNA gene amplicon sequencing, the composition in the endospore-enriched community was compared with the community from untreated control samples (whole community). In the whole community, Firmicutes had a relative abundance of 8% and 19% in the two different lake sediments. In contrast, in the endospore-enriched community, Firmicutes abundance increased to 90.6% and 83.9%, respectively, confirming the efficiency of the endospore enrichment. The relative abundance of other microbial groups that form spore-like resisting states (i.e. actinobacteria, cyanobacteria and myxococcales) was below 2% in the endospore-enriched community, indicating that the method is adapted to true endospores. Representatives from two out of the three known classes of Firmicutes (Bacilli and Clostridia) were detected and supposedly asporogenic groups (e.g. Ethanoligenes and Trichococcus) could be detected. The method presented here is a leap forward for ecological studies of endospore-forming Firmicutes. It can be applied to other types of samples in order to reveal the diversity and metabolic potential of this bacterial group in the environment.

Enhancement of anion binding in lanthanide optical sensors

In the design of molecular sensors, researchers exploit binding interactions that are usually defined in terms of topology and charge complementarity. The formation of complementary arrays of highly cooperative, noncovalent bonding networks facilitates protein-ligand binding, leading to motifs such as the "lock-and-key". Synthetic molecular sensors often employ metal complexes as key design elements as a way to construct a binding site with the desired shape and charge to achieve target selectivity. In transition metal complexes, coordination number, structure and ligand dynamics are governed primarily by a combination of inner-sphere covalent and outer-sphere noncovalent interactions. These interactions provide a rich variable space that researchers can use to tune structure, stability, and dynamics. In contrast, lanthanide(III)-ligand complex formation and ligand-exchange dynamics are dominated by reversible electrostatic and steric interactions, because the unfilled f shell is shielded by the larger, filled d shell. Luminescent lanthanides such as terbium, europium, dysprosium, and samarium display many photophysical properties that make them excellent candidates for molecular sensor applications. Complexes of lanthanide ions act as receptors that exhibit a detectable change in metal-based luminescence upon binding of an anion. In our work on sensors for detection of dipicolinate, the unique biomarker of bacterial spores, we discovered that the incorporation of an ancillary ligand (AL) can enhance binding constants of target anions to lanthanide ions by as much as two orders of magnitude. In this Account, we show that selected ALs in lanthanide/anion systems greatly improve sensor performance for medical, planetary science, and biodefense applications. We suggest that the observed anion binding enhancement could result from an AL-induced increase in positive charge at the lanthanide ion binding site. This effect depends on lanthanide polarizability, which can be established from the ionization energy of Ln(3+) → Ln(4+). These results account for the order Tb(3+) > Dy(3+) > Eu(3+) ≈ Sm(3+). As with many lanthanide properties, ranging from hydration enthalpy to vaporization energy, this AL-induced enhancement shows a large discrepancy between Tb(3+) and Eu(3+) despite their similarity in size, a phenomenon known as the "gadolinium break". This discrepancy, based on the unusual stabilities of the Eu(2+) and Tb(4+) oxidation states, results from the half-shell effect, as both of these ions have half-filled 4f-shells. The high polarizability of Tb(3+) explains the extraordinarily large increase in the binding affinity of anions for terbium compared to other lanthanides. We recommend that researchers consider this AL-induced enhancement when designing lanthanide-macrocycle optical sensors. Ancillary ligands also can reduce the impact of interfering species such as phosphate commonly found in environmental and physiological samples.

Synthesis of terbium(III) complex with a biscoumarin derivative and its immobilization in PMMA-based composite thin films with fluorescent properties

An amorphous complex of Tb(III) with the biscoumarin derivative 3,3′-[(4-hydroxyphenyl)methylene)]bis-(4-hydroxy-2H-1-benzopyran-2-one), Tb(H2L)3, was successfully synthesized and characterized. IR- and 1H-NMR-spectroscopy were used to investigate the coordination of the ligand around the Tb(III) ion. Values for the quantum yield and the life time of the excited state of the complex were obtained. The complex was immobilized in transparent and flexible PMMA-based films by a simple casting technique. PMMA/chloroform solutions were used in synthetic procedures that resulted in both glass-supported and self-supporting nanocomposite films. The morphology of the films was studied by scanning electron microscopy, atomic force microscopy and transmission electron microscopy, showing the formation of crack-free films. The presence of the Tb(III) complex in the matrix was proven by the presence of characteristic bands in the IR spectra. Fluorescence microscopy and fluorescence spectroscopy demonstrated the promising optical properties of the films showing the characteristic emission bands of the Tb(III) ions. The longer life time of the excited state of the immobilized complex confirmed the protective role of the PMMA matrix on the optical properties of the complex. The composite films possessing optical properties have the potential for application as active components in optical devices.

Quantification of endospore-forming firmicutes by quantitative PCR with the functional gene spo0A

Bacterial endospores are highly specialized cellular forms that allow endospore-forming Firmicutes (EFF) to tolerate harsh environmental conditions. EFF are considered ubiquitous in natural environments, in particular, those subjected to stress conditions. In addition to natural habitats, EFF are often the cause of contamination problems in anthropogenic environments, such as industrial production plants or hospitals. It is therefore desirable to assess their prevalence in environmental and industrial fields. To this end, a high-sensitivity detection method is still needed. The aim of this study was to develop and evaluate an approach based on quantitative PCR (qPCR). For this, the suitability of functional genes specific for and common to all EFF were evaluated. Seven genes were considered, but only spo0A was retained to identify conserved regions for qPCR primer design. An approach based on multivariate analysis was developed for primer design. Two primer sets were obtained and evaluated with 16 pure cultures, including representatives of the genera Bacillus, Paenibacillus, Brevibacillus, Geobacillus, Alicyclobacillus, Sulfobacillus, Clostridium, and Desulfotomaculum, as well as with environmental samples. The primer sets developed gave a reliable quantification when tested on laboratory strains, with the exception of Sulfobacillus and Desulfotomaculum. A test using sediment samples with a diverse EFF community also gave a reliable quantification compared to 16S rRNA gene pyrosequencing. A detection limit of about 10(4) cells (or spores) per gram of initial material was calculated, indicating this method has a promising potential for the detection of EFF over a wide range of applications.

Activate to eradicate: inhibition of Clostridium difficile spore outgrowth by the synergistic effects of osmotic activation and nisin

BACKGROUND

Germination is the irreversible loss of spore-specific properties prior to outgrowth. Because germinating spores become more susceptible to killing by stressors, induction of germination has been proposed as a spore control strategy. However, this strategy is limited by superdormant spores that remain unaffected by germinants. Harsh chemicals and heat activation are effective for stimulating germination of superdormant spores but are impractical for use in a hospital setting, where Clostridium difficile spores present a challenge. Here, we tested whether osmotic activation solutes will provide a mild alternative for stimulation of superdormant C. difficile spores in the presence of germinants as previously demonstrated in several species of Bacillus. In addition, we tested the hypothesis that the limitations of superdormancy can be circumvented with a combined approach using nisin, a FDA-approved safe bacteriocin, to inhibit outgrowth of germinated spores and osmotic activation solutes to enhance outgrowth inhibition by stimulating superdormant spores.

PRINCIPAL FINDINGS

Exposure to germination solution triggered ~1 log(10) colony forming units (CFU) of spores to germinate, and heat activation increased the spores that germinated to >2.5 log(10)CFU. Germinating spores, in contrast to dormant spores, became susceptible to inhibition by nisin. The presence of osmotic activation solutes did not stimulate germination of superdormant C. difficile spores exposed to germination solution. But, in the absence of germination solution, osmotic activation solutes enhanced nisin inhibition of superdormant spores to >3.5 log(10)CFU. The synergistic effects of osmotic activation solutes and nisin were associated with loss of membrane integrity.

CONCLUSIONS

These findings suggest that the synergistic effects of osmotic activation and nisin bypass the limitations of germination as a spore control strategy, and might be a novel method to safely and effectively reduce the burden of C.difficile spores on skin and environmental surfaces.

Detection and differentiation of bacterial spores in a mineral matrix by Fourier transform infrared spectroscopy (FTIR) and chemometrical data treatment

BACKGROUND

Fourier transform infrared spectroscopy (FTIR) has been used as analytical tool in chemistry for many years. In addition, FTIR can also be applied as a rapid and non-invasive method to detect and identify microorganisms. The specific and fingerprint-like spectra allow - under optimal conditions - discrimination down to the species level. The aim of this study was to develop a fast and reproducible non-molecular method to differentiate pure samples of Bacillus spores originating from different species as well as to identify spores in a simple matrix, such as the clay mineral, bentonite.

RESULTS

We investigated spores from pure cultures of seven different Bacillus species by FTIR in reflection or transmission mode followed by chemometrical data treatment. All species investigated (B. atrophaeus, B. brevis, B. circulans, B. lentus, B. megaterium, B. subtilis, B. thuringiensis) are typical aerobic soil-borne spore formers. Additionally, a solid matrix (bentonite) and mixtures of benonite with spores of B. megaterium at various wt/wt ratios were included in the study. Both hierarchical cluster analysis and principal component analysis of the spectra along with multidimensional scaling allowed the discrimination of different species and spore-matrix-mixtures.

CONCLUSIONS

Our results show that FTIR spectroscopy is a fast method for species-level discrimination of Bacillus spores. Spores were still detectable in the presence of the clay mineral bentonite. Even a tenfold excess of bentonite (corresponding to 2.1 × 1010 colony forming units per gram of mineral matrix) still resulted in an unambiguous identification of B. megaterium spores.