Coronary CT angiography in coronary artery disease: correlation between virtual intravascular endoscopic appearances and left bifurcation angulation and coronary plaques

Comprehensive Risk Assessment of LAD Disease Progression in CCTA: The CLAP Score Study

BACKGROUND

a wider left main bifurcation angle (LMBA) has been linked to severe plaque development in the proximal left anterior descending artery (LAD). This study aimed to identify predictors of severe proximal LAD stenosis and major adverse cardiovascular events (MACE) using coronary computed tomography angiography (CCTA).

METHODS

from an initial cohort of 650 consecutive patients, we analyzed 499 patients who met the inclusion criteria after exclusions. Plaque morphology and characteristics were assessed by CCTA, and MACE occurrences were recorded at follow-up. A predictive score for LAD disease progression (CLAP score) was developed and validated.

RESULTS

severe proximal LAD stenosis was detected in 32% (160/499) of patients by CCTA. MACE occurred in 12.5% of patients at follow-up. Significant predictors of MACE were LMBA > 80° (HR: 4.47; 95% CI: 3.80-6.70; p < 0.001), diabetes (HR: 2.94; 95% CI: 1.54-4.63; p = 0.031), chronic kidney disease (HR: 1.71; 95% CI: 1.31-6.72; p = 0.041), high-risk plaques (HR: 2.30; 95% CI: 1.45-3.64; p < 0.01), obstructive CAD (HR: 2.50; 95% CI: 1.50 to 4.10, p = 0.01), and calcium score (CAC) (HR: 1.05; 95% CI: 1.02-1.08, p = 0.004). The CLAP score demonstrated good discriminatory power in both the development (AUC 0.91; 95% CI: 0.86-0.96) and validation cohorts (AUC 0.85; 95% CI: 0.79-0.91); Conclusions: LMBA > 80°, diabetes, chronic kidney disease, obstructive CAD, CAC score >180 and high-risk plaques were significant predictors of MACE in CCTA patients. The CLAP score effectively predicted LAD disease progression, aiding in risk stratification and optimization of intervention strategies for suspected coronary artery disease.

Left anterior descending coronary artery-left circumflex coronary artery bifurcation angle and severity of coronary artery disease; is there any correlation? A cross-sectional study

Background and Aims

The aim of this study is to evaluate the association of coronary computed tomography angiography derived (CCTA) plaque characteristics and the left anterior descending coronary artery (LAD) and left circumflex coronary artery (LCX) bifurcation angle with severity of coronary artery disease (CAD).

Methods

All the stable patients with suspected CAD who underwent CCTA between January to December 2021 were included. Correlation between CCTA-derived aggregated plaque volume (APV), LAD-LCX angle, remodeling index (RI), coronary calcium score with Gensini score in conventional angiography were assessed. One hundred and twenty-two patients who underwent both CCTA and coronary angiography were analyzed.

Results

Our analysis showed that the median (percentile 25% to percentile 75%) of the APV, LAD-LCx angle, and calcium score were 31% (17%-47%), 58° (39°-89°), and 31 (0-186), respectively. Also, the mean ± SD of the RI was 1.05 ± 0.20. Significant correlation between LAD-LCx bifurcation angle (0.0001-0.684), APV (0.002-0.281), RI (0.0001-0.438), and calcium score (0.016-0.217) with Gensini score were detected. There was a linear correlation between the mean LAD-LCx bifurcation angle and the Gensini score. The sensitivity and specificity for the cut-off value of 47.5° for the LAD-LCX angle were 86.7% and 82.1%, respectively.

Conclusion

There is a direct correlation between the LAD-LCx angle and the Gensini score. In addition to plaque characteristics, anatomic-based CCTA-derived indices can be used to identify patients at higher risk for CAD.

Cardiovascular computed tomography in cardiovascular disease: An overview of its applications from diagnosis to prediction

Cardiovascular computed tomography angiography (CTA) is a widely used imaging modality in the diagnosis of cardiovascular disease. Advancements in CT imaging technology have further advanced its applications from high diagnostic value to minimising radiation exposure to patients. In addition to the standard application of assessing vascular lumen changes, CTA-derived applications including 3D printed personalised models, 3D visualisations such as virtual endoscopy, virtual reality, augmented reality and mixed reality, as well as CT-derived hemodynamic flow analysis and fractional flow reserve (FFRCT) greatly enhance the diagnostic performance of CTA in cardiovascular disease. The widespread application of artificial intelligence in medicine also significantly contributes to the clinical value of CTA in cardiovascular disease. Clinical value of CTA has extended from the initial diagnosis to identification of vulnerable lesions, and prediction of disease extent, hence improving patient care and management. In this review article, as an active researcher in cardiovascular imaging for more than 20 years, I will provide an overview of cardiovascular CTA in cardiovascular disease. It is expected that this review will provide readers with an update of CTA applications, from the initial lumen assessment to recent developments utilising latest novel imaging and visualisation technologies. It will serve as a useful resource for researchers and clinicians to judiciously use the cardiovascular CT in clinical practice.

Cardiovascular Computed Tomography in the Diagnosis of Cardiovascular Disease: Beyond Lumen Assessment

Cardiovascular CT is being widely used in the diagnosis of cardiovascular disease due to the rapid technological advancements in CT scanning techniques. These advancements include the development of multi-slice CT, from early generation to the latest models, which has the capability of acquiring images with high spatial and temporal resolution. The recent emergence of photon-counting CT has further enhanced CT performance in clinical applications, providing improved spatial and contrast resolution. CT-derived fractional flow reserve is superior to standard CT-based anatomical assessment for the detection of lesion-specific myocardial ischemia. CT-derived 3D-printed patient-specific models are also superior to standard CT, offering advantages in terms of educational value, surgical planning, and the simulation of cardiovascular disease treatment, as well as enhancing doctor-patient communication. Three-dimensional visualization tools including virtual reality, augmented reality, and mixed reality are further advancing the clinical value of cardiovascular CT in cardiovascular disease. With the widespread use of artificial intelligence, machine learning, and deep learning in cardiovascular disease, the diagnostic performance of cardiovascular CT has significantly improved, with promising results being presented in terms of both disease diagnosis and prediction. This review article provides an overview of the applications of cardiovascular CT, covering its performance from the perspective of its diagnostic value based on traditional lumen assessment to the identification of vulnerable lesions for the prediction of disease outcomes with the use of these advanced technologies. The limitations and future prospects of these technologies are also discussed.

3D computed tomography intravascular endoscopy

Using coronary computed tomography angiography (CCTA), coronary plaques can be characterized based on both their morphology and composition. Coronary plaques are generally assessed on 2D axial and multiplanar reformatted images. Nevertheless, these visualization tools are limited to observing extraluminal changes in the coronary artery. The presence of plaques prevents them from providing a visual representation of the intraluminal coronary wall. Since its invention in 2000, coronary fly-through or virtual angioscopy (VA) has been extensively studied. However, its application was limited because it required an optimal CT scan and time-consuming post-processing. In recent years, advances in post-processing software have made construction of VA easier, but until recently the quality of the images was insufficient for most patients. Using 3D intravascular endoscopy (3DIE) visualization, we present various intraluminal appearances of the coronary wall and plaque in relation to various types of plaque.

Investigation of the Relationship between Right Coronary Artery-Aorta Angle and Coronary Artery Disease and Associated Risk Factors

At the level of the left coronary artery tree, there is evidence showing an association between bifurcation angle and coronary artery disease (CAD), and this motivated us to explore similar associations at the level of the right coronary artery (RCA). The purpose of this study was to determine whether there is a relationship between RCA-aorta angle and CAD and age, sex, body mass index, smoking status, hypertension, and high blood cholesterol. The coronary computed tomography angiography datasets and CAD risk factor checklists of 250 patients were retrospectively reviewed, with RCA-aorta angles measured via multiplanar reformation images. Independent t-tests were used to compare mean RCA-aorta angle measurements between groups, correlations between continuous variables were assessed using Pearson and Spearman correlations, and a general linear model was used to adjust for potentially confounding variables. Coronary angle measurements were conducted by two independent assessors with very strong intraclass correlation (r=0.999, p<0.001). A significantly smaller mean RCA-aorta angle was observed in the CAD group (79.07 ± 24.88°) compared to the normal group (92.08 ± 19.51°, p=0.001), in smokers (76.63 ± 22.94°) compared to non-smokers (85.25 ± 23.84°, p=0.016), and a narrow RCA-aorta angle was negatively correlated with BMI (r=-0.174, p=0.010). This study suggests a relationship between narrow RCA-aorta angles and CAD, smoking, and increasing BMI.

Evaluation of the Relationship between Left Coronary Artery Bifurcation Angle and Coronary Artery Disease: A Systematic Review

Recent studies have suggested a relationship between wide left coronary artery bifurcation (left anterior descending [LAD]-left circumflex [LCx]) angle and coronary artery disease (CAD). Current literature is multifaceted. Different studies have analysed this relationship using computational fluid dynamics, by considering CAD risk factors, and from simple causal-comparative and correlational perspectives. Hence, the purpose of this systematic review was to critically evaluate the current literature and determine whether there is sufficient evidence available to prove the relationship between LAD-LCx angle and CAD. Five electronic databases (ProQuest, Scopus, PubMed, CINAHL Plus with Full Text, and Emcare) were used to locate relevant texts, which were then screened according to predefined eligibility criteria. Thirteen eligible articles were selected for review. Current evidence suggests individuals with a wide LAD-LCx angle experience altered haemodynamics at the bifurcation site compared to those with narrower angles, which likely facilitates a predisposition to developing CAD. However, further research is required to determine causality regarding relationships between LAD-LCx angle and CAD risk factors. Insufficient valid evidence exists to support associations between LAD-LCx angle and degree of coronary stenosis, and future haemodynamic analyses should explore more accurate coronary artery modelling, as well as CAD progression in already stenosed bifurcations.

Added Value of Computed Tomography Virtual Intravascular Endoscopy in the Evaluation of Coronary Arteries with Stents or Plaques

Coronary computed tomography angiography (CCTA) is a widely used imaging modality for diagnosing coronary artery disease (CAD) but is limited by a high false positive rate when evaluating coronary arteries with stents and heavy calcifications. Virtual intravascular endoscopy (VIE) images generated from CCTA can be used to qualitatively assess the vascular lumen and might be helpful for overcoming this challenge. In this study, one hundred subjects with coronary stents underwent both CCTA and invasive coronary angiography (ICA). A total of 902 vessel segments were analyzed using CCTA and VIE. The vessel segments were first analyzed on CCTA alone. Then, using VIE, the segments were classified qualitatively as either negative or positive for in-stent restenosis (ISR) or CAD. These results were compared, using ICA as the reference, to determine the added diagnostic value of VIE. Of the 902 analyzed vessel segments, CCTA/VIE had sensitivity, specificity, accuracy, positive predictive value, and negative predictive value (shown in %) of 93.9/90.2, 96.2/98.2, 96.0/97.7, 70.0/83.1, and 99.4/99.0, respectively, in diagnosing ISR or CAD, with significantly improved specificity (p = 0.025), accuracy (p = 0.046), and positive predictive value (p = 0.047). VIE can be a helpful addition to CCTA when evaluating coronary arteries.

Flush Flow Behaviour Affected by the Morphology of Intravascular Endoscope: A Numerical Simulation and Experimental Study

Background: Whilst intravascular endoscopy can be used to identify lesions and assess the deployment of endovascular devices, it requires temporary blockage of the local blood flow during observation, posing a serious risk of ischaemia. Objective: To aid the design of a novel flow-blockage-free intravascular endoscope, we explored changes in the haemodynamic behaviour of the flush flow with respect to the flow injection speed and the system design. Methods: We first constructed the computational models for three candidate endoscope designs (i.e., Model A, B, and C). Using each of the three endoscopes, flow patterns in the target vessels (straight, bent, and twisted) under three different sets of boundary conditions (i.e., injection speed of the flush flow and the background blood flowrate) were then resolved through use of computational fluid dynamics and in vitro flow experiments. The design of endoscope and its optimal operating condition were evaluated in terms of the volume fraction within the vascular segment of interest, as well as the percentage of high-volume-fraction area (PHVFA) corresponding to three cross-sectional planes distal to the microcatheter tip. Results: With a mild narrowing at the endoscope neck, Model B exhibited the highest PHVFA, irrespective of location of the cross-sectional plane, compared with Models A and C which, respectively, had no narrowing and a moderate narrowing. The greatest difference in the PHVFA between the three models was observed on the cross-sectional plane 2 mm distal to the tip of the microcatheter (Model B: 33% vs. Model A: 18%). The background blood flowrate was found to have a strong impact on the resulting volume fraction of the flush flow close to the vascular wall, with the greatest difference being 44% (Model A). Conclusion: We found that the haemodynamic performance of endoscope Model B outperformed that of Models A and C, as it generated a flush flow that occupied the largest volume within the vascular segment of interest, suggesting that the endoscope design with a diameter narrowing of 30% at the endoscope neck might yield images of a better quality.

Retinal and choroidal vascular changes in coronary heart disease: an optical coherence tomography angiography study

To reveal the association between retinal microvasculature changes and coronary heart disease (CHD), we assessed the full retinal thicknesses of eight areas, the vessel density of four layers (consisting of nine areas) and the flow area in two layers with optical coherence tomography angiography (OCTA) in CHD patients and healthy controls. The mean vessel density of several layers was significantly lower in patients. The difference in choroid capillary flow (negative correlation) between the two groups was significant. Decreased vessel density and blood flow were associated with coronary artery and branch stenosis. The decreases in retinal vessel density, choroidal vessel density, and blood flow area are closely related to coronary artery and branch stenosis.

Synchrotron radiation computed tomography assessment of calcified plaques and coronary stenosis with different slice thicknesses and beam energies on 3D printed coronary models

Background

To investigate the effect of different slice thicknesses and beam energies on the visualization and assessment of coronary artery stenosis caused by calcified plaques using synchrotron radiation computed tomography (CT) based on 3D printed coronary artery models.

Methods

Patient-specific 3D coronary models were created based on 3 sample coronary CT angiographic cases with calcified plaques in the left coronary arteries. In addition to the original significant coronary stenosis (>70%) shown on these CT images, stenoses of <50% and >90% were created in the segmented coronary models for simulation of different degrees of stenosis. The coronary lumen and calcification were printed with soft and rigid materials to simulate properties of coronary wall and calcified plaque, respectively. The models were scanned with synchrotron radiation CT with beam energies of 30, 40 and 50 keV and spatial resolution of 0.019×0.019×0.019 mm³ voxel size. Original high-resolution images were reconstructed with slice thicknesses of 0.095, 0.208, 0.302 and 0.491 mm to determine the effect of spatial resolution on plaque and coronary stenosis assessment based on 2D axial and 3D virtual intravascular endoscopy (VIE) images.

Results

Three coronary artery models were successfully printed with plaques placed in the coronary arteries to simulate different degrees of stenosis. 2D and 3D VIE images reconstructed with slice thicknesses of 0.095, 0.208 and 0.302 mm allowed for accurate assessment of coronary plaques and lumen stenosis with no significant differences (P>0.05). Synchrotron radiation CT images reconstructed with a slice thickness of 0.491 mm resulted in overestimation of coronary stenosis when compared to other images on 2D and 3D VIE views (<50% vs. 55-72%; 70-79% vs. 80-90%) with significant differences (P<0.05). Similarly, irregular plaque appearances were observed on 2D and 3D VIE images with a slice thickness of 0.491 mm when compared to others using thin slice thicknesses. The scanning protocol with beam energy of 30 keV provided optimal visualization of coronary lumen and plaque appearances.

Conclusions

This study shows the feasibility of using 3D printed coronary artery models to simulate calcifications and different degrees of coronary stenosis. High resolution synchrotron radiation CT imaging with the 30 keV beam energy enables accurate assessment of coronary stenosis in the presence of calcification, thus highlighting the importance of high spatial resolution in the diagnosis of calcified coronary plaques.

Protective effect of Xuebijing injection against acute lung injury induced by left ventricular ischemia/reperfusion in rabbits

Xuebijing (XBJ) is a Chinese herbal preparation. Previous studies have demonstrated that XBJ injection is able to inhibit the uncontrolled release of endogenous inflammatory mediators, attenuate inflammation, and alleviate organ damage. However, there are no relevant reports on the protective effect of XBJ against left ventricular ischemia/reperfusion (I/R)-induced acute lung injury (ALI). Therefore, the aim of the present study was to evaluate the protective effect of XBJ on ALI induced by left ventricular I/R, and provide evidence for the clinical application of XBJ. In the present study, 120 healthy rabbits of mixed gender were randomly assigned to a normal control group, ischemia group, I/R group (I/RG) and XBJ-injection treatment group (TG). In addition, each group was further divided into three subgroups (n=10/subgroup), namely, 30 min pre-ischemia, 30 min post-ischemia and 30 min post-reperfusion subgroups. Blood samples (5 ml) were collected from the jugularis externa and carotis communis of the rabbits at the three time points, and a blood gas analyzer was used to measure the arterial partial pressure of oxygen (PaO₂) and carbon dioxide (PaCO₂). Following sacrifice, the lungs of the rabbits were removed and a bronchoalveolar lavage (BAL) was immediately performed. An enzyme-linked immunosorbent assay was used to measure the expression levels of tumor necrosis factor-α (TNF-α) in the BAL fluid (BALF) and peripheral blood. In addition, the lower lobe of the right lung was removed in order to measure the protein expression levels of intercellular adhesion molecule-1 (ICAM-1) and TNF-α. The results demonstrated that in the rabbits of the TG PaO₂ was increased, PaCO₂ was decreased, the lung tissue congestion edema was attenuated, the expression levels of TNF-α in the peripheral blood and BALF were reduced and the protein expression levels of ICAM-1 and TNF-α in the lung tissue samples were decreased, as compared with those in the I/RG rabbits. These results suggest that XBJ may protect against left ventricular I/R-induced ALI by regulating the expression of the inflammatory mediators TNF-α and ICAM-1.

Coronary CT angiography in calcified coronary plaques: Comparison of diagnostic accuracy between bifurcation angle measurement and coronary lumen assessment for diagnosing significant coronary stenosis

BACKGROUND

To investigate the diagnostic value of coronary CT angiography (CCTA) by bifurcation angle measurement in the assessment of calcified plaques compared to conventional coronary lumen analysis.

METHODS

Fifty-three patients with calcified plaques identified on CCTA in the left coronary artery were included in the study. Minimal lumen diameter (MLD) and bifurcation angle between the left anterior descending (LAD) and left circumflex (LCx) arteries were measured and compared between CCTA and invasive coronary angiography (ICA), while the areas under the curves (AUCs) by receiver-operating characteristic curve analysis (ROC) were compared between CCTA and ICA with regard to the diagnostic value of using bifurcation angle as a criterion.

RESULTS

On a per-vessel assessment, the sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) and 95% confidence interval (CI) with the use of bifurcation angle for determining coronary stenosis were 100% (86%, 100%), 79% (59%, 92%), 81% (62%, 92%), and 100% (85%, 100%) for CCTA, and 100% (86%, 100%), 82% (63%, 94%), 83% (65%, 94%), and 100% (85%, 100%) for ICA, respectively. While the sensitivity and NPV remained unchanged, the specificity and PPV of CCTA by MLD were 33% (21%, 47%) and 43% (31%, 56%). The AUCs by ROC curve analysis for CCTA and ICA bifurcation angle measurements demonstrated no significant difference (p>0.05, 0.79 vs 0.86, and 0.70 vs 0.68 at the LAD and LCx assessment, respectively).

CONCLUSION

Coronary CT angiography by bifurcation angle measurement shows significant improvement in the diagnosis of calcified plaques with diagnostic value comparable to invasive coronary angiography.

Virtual intravascular endoscopy visualization of calcified coronary plaques: a novel approach of identifying plaque features for more accurate assessment of coronary lumen stenosis

This study was conducted to investigate the feasibility of using 3D virtual intravascular endoscopy (VIE) as a novel approach for characterization of calcified coronary plaques with the aim of differentiating superficial from deep calcified plaques, thus improving assessment of coronary stenosis.A total of 61 patients with suspected coronary artery disease were included in the study. Minimal lumen diameter (MLD) was measured and compared between coronary CT angiography (CCTA) (≥64-slice) and invasive coronary angiography (ICA) with regard to the measurement bias, whereas VIE findings were correlated with CCTA with respect to the diagnostic performance of coronary stenosis and the area under the curve (AUC) by receiver-operating characteristic curve analysis (ROC).In all 3 coronary arteries, the CCTA consistently underestimated the MLD relative to the ICA (P < 0.001). On a per-vessel assessment, the sensitivity, specificity, positive predictive value, and negative predictive value and 95% confidence interval (CI) were 94% (95% CI: 61%, 100%), 27% (95% CI: 18%, 38%), 33% (95% CI: 23%, 43%), and 92% (95% CI: 74%, 99%) for CCTA, and 100% (95% CI: 89%, 100%), 85% (95% CI: 75%, 92%), 71% (95% CI: 56%, 84%), and 100% (95% CI: 95%, 100%) for VIE, respectively. The AUC by ROC analysis for VIE demonstrated significant improvement in analysis of left anterior descending calcified plaques compared with CCTA (0.99 vs 0.60, P < 0.001), with better performance in the left circumflex and right coronary arteries (0.98 vs 0.84 and 0.77 vs 0.77, respectively; P = 0.07 and P = 0.96, respectively). There are no significant differences between 64-, 128-, and 640-slice CCTA and VIE in terms of sensitivity, specificity, positive and negative predictive value in the diagnosis of coronary stenosis.This study shows the feasibility of using VIE for characterizing morphological features of calcified plaques, therefore, significantly improving assessment of coronary stenosis.

Molecular imaging of plaques in coronary arteries with PET and SPECT

Coronary artery disease remains a major cause of mortality. Presence of atherosclerotic plaques in the coronary artery is responsible for lumen stenosis which is often used as an indicator for determining the severity of coronary artery disease. However, the degree of coronary lumen stenosis is not often related to compromising myocardial blood flow, as most of the cardiac events that are caused by atherosclerotic plaques are the result of vulnerable plaques which are prone to rupture. Thus, identification of vulnerable plaques in coronary arteries has become increasingly important to assist identify patients with high cardiovascular risks. Molecular imaging with use of positron emission tomography (PET) and single photon emission computed tomography (SPECT) has fulfilled this goal by providing functional information about plaque activity which enables accurate assessment of plaque stability. This review article provides an overview of diagnostic applications of molecular imaging techniques in the detection of plaques in coronary arteries with PET and SPECT. New radiopharmaceuticals used in the molecular imaging of coronary plaques and diagnostic applications of integrated PET/CT and PET/MRI in coronary plaques are also discussed.

Computational fluid dynamics in coronary artery disease

Computational fluid dynamics (CFD) is a widely used method in mechanical engineering to solve complex problems by analysing fluid flow, heat transfer, and associated phenomena by using computer simulations. In recent years, CFD has been increasingly used in biomedical research of coronary artery disease because of its high performance hardware and software. CFD techniques have been applied to study cardiovascular haemodynamics through simulation tools to predict the behaviour of circulatory blood flow in the human body. CFD simulation based on 3D luminal reconstructions can be used to analyse the local flow fields and flow profiling due to changes of coronary artery geometry, thus, identifying risk factors for development and progression of coronary artery disease. This review aims to provide an overview of the CFD applications in coronary artery disease, including biomechanics of atherosclerotic plaques, plaque progression and rupture; regional haemodynamics relative to plaque location and composition. A critical appraisal is given to a more recently developed application, fractional flow reserve based on CFD computation with regard to its diagnostic accuracy in the detection of haemodynamically significant coronary artery disease.

Coronary CT angiography in the quantitative assessment of coronary plaques

Coronary computed tomography angiography (CCTA) has been recently evaluated for its ability to assess coronary plaque characteristics, including plaque composition. Identification of the relationship between plaque composition by CCTA and patient clinical presentations may provide insight into the pathophysiology of coronary artery plaque, thus assisting identification of vulnerable plaques which are associated with the development of acute coronary syndrome. CCTA-generated 3D visualizations allow evaluation of both coronary lesions and lumen changes, which are considered to enhance the diagnostic performance of CCTA. The purpose of this review is to discuss the recent developments that have occurred in the field of CCTA with regard to its diagnostic accuracy in the quantitative assessment of coronary plaques, with a focus on the characterization of plaque components and identification of vulnerable plaques.