Color, Structure, and Thermal Stability of Alginate Films with Raspberry and/or Black Currant Seed Oils

In this study, biodegradable and active films based on sodium alginate incorporated with different concentrations of oils (25% and 50%) from fruit seeds were developed for potential applications in food packaging. The ultraviolet and visible (UV-VIS) spectra of raspberry seed oil (RSO) and black currant seed oil (BCSO) indicated differences in bioactive compounds, such as tocopherols, phenolic compounds, carotenoids, chlorophyll, and oxidative status (amounts of dienes, trienes, and tetraenes) of active components added to alginate films. The study encompassed the color, structure, and thermal stability analysis of sodium alginate films incorporated with RSO and BCSO and their mixtures. The color of alginate films before and after the addition of oils from both fruit seeds was evaluated by measuring color coordinates in the CIELab color space: L* (lightness), a* (red-green), and b* (yellow-blue). The lightness values ranged between 94.21 and 95.08, and the redness values varied from -2.20 to -2.65, slightly decreasing for the films enriched with oils. In contrast, yellowness values ranged between 2.93 and 5.80 for the obtained active materials, significantly increasing compared to the control alginate film (L* = 95.48, a* = -1.92, and b* = -0.14). Changes in the structure and morphology of the alginate films after incorporating bioactive-rich oils were observed using scanning electron microscopy (SEM). Films with RSO and oil mixtures had more developed surfaces than films with BCSO. Moreover, the cross-sections of the films with RSO showed holes evenly distributed inside the films, indicating traces of volatile compounds. Thermal decomposition of the alginate films loaded with oils showed five separate stages (to 125 °C, 125-300 °C, 310-410 °C, 410-510 °C, and 750-1000 °C, respectively) related to the oil and surfactant decomposition. The shape of the thermogravimetric curves did not depend on the oil type. The added oils reduced the efficiency of alginate decomposition in the first stage. The obtained results showed that new functional and thermally stable food packaging films based on sodium alginate with a visual appearance acceptable to consumers could be produced by utilizing oils from fruit seed residues.

Supercritical Extraction Techniques for Obtaining Biologically Active Substances from a Variety of Plant Byproducts

Supercritical fluid extraction (SFE) techniques have garnered significant attention as green and sustainable methods for obtaining biologically active substances from a diverse array of plant byproducts. This paper comprehensively reviews the use of supercritical fluid extraction (SFE) in obtaining bioactive compounds from various plant residues, including pomace, seeds, skins, and other agricultural byproducts. The main purpose of supercritical fluid extraction (SFE) is the selective isolation and recovery of compounds, such as polyphenols, essential oils, vitamins, and antioxidants, that have significant health-promoting properties. Using supercritical carbon dioxide as the solvent, supercritical fluid extraction (SFE) not only eliminates the need for hazardous organic solvents, e.g., ethanol, and methanol, but also protects heat-sensitive bioactive compounds. Moreover, this green extraction technique contributes to waste valorisation by converting plant byproducts into value-added extracts with potential applications in the food, pharmaceutical, and cosmetic industries. This review highlights the advantages of SFE, including its efficiency, eco-friendliness, and production of residue-free extracts, while discussing potential challenges and future prospects for the utilisation of SFE in obtaining biologically active substances from plant byproducts.

Alginate Films Enriched in Raspberry and/or Black Currant Seed Oils as Active Food Packaging

Alginate films plasticized with glycerol and enriched in raspberry and/or black currant seed oils were prepared via casting solution techniques. The intention was to create active films for food packaging where antioxidants in a film would deactivate oxidants in a packed product or its surroundings, improving conditions inside packaging and extending the shelf life of such a product. The prepared materials were characterized by physicochemical, spectroscopic, mechanical, water vapor transmission (WVTR), and antioxidant activity analysis. Infrared spectra of the alginate films with oils were similar to those without the additive; the band with a maximum at about 1740 cm-1 stood out. The prepared materials with oils were thicker, contained less water, were more yellow, and were less permeable to water vapor. Moreover, the presence of the oil in the films resulted in a slightly lower Young's modulus and lower stress at break values but higher strain at break. The antioxidant capacity of raspberry seed oil itself was about five times higher than that of black currant seed oil, and a similar trend was noticed for films modified with these oils. The results indicated that both oils could be used as active substances with antioxidant properties in food packaging.

Essential Components from Plant Source Oils: A Review on Extraction, Detection, Identification, and Quantification

Oils derived from plant sources, mainly fixed oils from seeds and essential oil from other parts of the plant, are gaining interest as they are the rich source of beneficial compounds that possess potential applications in different industries due to their preventive and therapeutic actions. The essential oils are used in food, medicine, cosmetics, and agriculture industries as they possess antimicrobial, anticarcinogenic, anti-inflammatory and immunomodulatory properties. Plant based oils contain polyphenols, phytochemicals, and bioactive compounds which show high antioxidant activity. The extractions of these oils are a crucial step in terms of the yield and quality attributes of plant oils. This review paper outlines the different modern extraction techniques used for the extraction of different seed oils, including microwave-assisted extraction (MAE), pressurized liquid extraction (PLE), cold-pressed extraction (CPE), ultrasound-assisted extraction (UAE), supercritical-fluid extraction (SFE), enzyme-assisted extraction (EAE), and pulsed electric field-assisted extraction (PEF). For the identification and quantification of essential and bioactive compounds present in seed oils, different modern techniques-such as high-performance liquid chromatography (HPLC), gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared spectroscopy (FTIR), gas chromatography-infrared spectroscopy (GC-IR), atomic fluorescence spectroscopy (AFS), and electron microscopy (EM)-are highlighted in this review along with the beneficial effects of these essential components in different in vivo and in vitro studies and in different applications. The primary goal of this research article is to pique the attention of researchers towards the different sources, potential uses and applications of oils in different industries.

A Review on Berry Seeds—A Special Emphasis on Their Chemical Content and Health-Promoting Properties

Berries are important components of the human diet, valued for their high content of nutrients and active compounds. Berry seeds are also important objects of scientific investigation as, in some cases, they can have a higher concentration of certain phytochemicals than other parts of the fruit. Moreover, they are often byproducts of the food industry that can be reused to make oil, extracts, or flour. We have reviewed available literature related to the chemical content and biological activity of seeds from five different berry species—red raspberry (Rubus idaeus L. and Rubus coreanus Miq.), strawberry (Fragaria x ananassa), grape (Vitis vinifera L.), sea buckthorn (Hippophae rhamnoides L.), and cranberry (Vaccinium macrocarpon Ait.). We have searched various databases, including PubMed, Web of Knowledge, ScienceDirect, and Scopus. Last search was conducted on 16.01.2023. Various preparations from berry seeds are valuable sources of bioactive phytochemicals and could be used as functional foods or to make pharmaceuticals or cosmetics. Some products, like oil, flour, or extracts, are already available on the market. However, many preparations and compounds still lack appropriate evidence for their effectiveness in vivo, so their activity should first be assessed in animal studies and clinical trials.

Ultrasound-Assisted Extraction of Blackberry Seed Oil: Optimization and Oil Characterization

Ultrasound-assisted extraction (UAE) was applied to extract oil from blackberry (BB) seeds. The effect of UAE conditions on oil recovery and quality was investigated. Favorable experimental conditions (ultrasound intensity (UI), extraction temperature, and time) were investigated using response surface methodology (RSM). A Box–Behnken design was used to predict optimized conditions for BB seed oil extraction. These conditions were as follows: 13.77 W/cm2 UI, 45 °C extraction temperature, and 15 min extraction time. The experimental value obtained for extraction efficiency under optimal conditions was 87 ± 0.34%, in good agreement with the optimized predicted value. UAE does not affect the oil composition and confers higher antioxidant values in BB seed oil in comparison with Soxhlet extraction.

Modeling and Optimization of the Isolation of Blackcurrant and Black Cumin Seeds Oils Using Supercritical Fluid Extraction

Supercritical fluid extraction is a powerful analytical tool and it is willingly used by researchers for the isolation of various components from different matrices. In our study, the carbon dioxide in the supercritical state was used for the extraction of oils from blackcurrant and black cumin seeds. To determine the optimal conditions for the process (temperature, pressure and time), the method of statistical experiment planning and the Box-Behnken design was applied and the yield of the oils and the content of fatty acids (FAs) were taken into consideration. It has been found that an increase in pressure causes an increase in extraction yield (W), and an increase in temperature, both at constant pressure and time, does not significantly change the yield value. Optimal yield values were obtained for both materials under almost similar extraction parameters: 306 bar/ 43 min/ 50 °C (blackcurrant) and 282 bar/ 40 min/ 50 °C (black cumin). The influence of the above parameters (T, p, t) on the content of FAs in the extracts has a slightly different trend. The use of supercritical carbon dioxide for the extraction of blackcurrant and black cumin seeds allowed for high process yield and high-quality, rich in polyunsaturated fatty acids oils which can be used as a substrate or final product for industry.

Blackcurrant (Ribes nigrum L.) Seeds-A Valuable Byproduct for Further Processing

The rational exploitation of byproducts is important from the point of view of their potential applicability in various fields. In this study, the possibility of further processing of blackcurrant seeds (BCs), which are a byproduct of fruit processing, was investigated. BCs were used as a material for the extraction of oil on a semi-industrial scale, and the residues were assessed in terms of their potential application in skin care products. Supercritical fluid extraction (SFE) using CO₂ at pressures of 230 and 330 bar and extraction temperature of 40 °C was exploited for isolation of oil, and the products were characterised taking into account lipophilic constituents. After 120 min, the oil yields were 19.67% and 20.94% using CO₂ at 230 and 330 bar, respectively, which showed that SFE was an effective method on a semi-industrial scale, taking into account the extraction yield. The oils had similar fatty acid compositions with a high percentage of linoleic acid (ca. 43%); however, tocopherols and carotenoids were most abundant in the oil obtained at 230 bar. It was also found that the composition of the SFE oils was comparable with that of cold-pressed oil, which shows that supercritical fluid extraction provides a high-quality product; therefore, it can be an alternative to cold pressing. Furthermore, the chemical compositions of the extracts from the oil isolation residues were established using UPLC-MS, and the impact of the extracts on human skin fibroblasts was assessed using the MTT and NR assays. The quantitative analysis revealed that the residues contained high amounts of polyphenolic acids, including gallic, protocatechuic, and hydroxybenzoic acid derivatives, as well as flavonoids, especially quercetin and kaempferol glucoside. Moreover, it was found that the extracts were nontoxic and exerted a stimulatory effect on cell metabolism. Therefore, they can be a valuable additive to natural plant-based cosmetics. Our results showed that blackcurrant seeds, regarded as a byproduct, can be a valuable material for further use.

Preliminary Evaluation of Supercritical Carbon Dioxide Extracted Dabai Pulp Oleoresin as a New Alternative Fat

There has been growing interest among food scientists in producing a toxin-free fat as an end product with varying physical or nutritional properties of interest to the food industry. Oleoresin is a rich source of bioactive compounds which consumers can easily add to a large variety of food. Dabai (Canarium odontophyllum) pulp oleoresin (DPL) was extracted using supercritical carbon dioxide (SC-CO2) extraction, a green extraction technology. This study investigates the quality of SC-CO2 extracted DPL in discovering its potential as a new alternative fat. The extraction experiment was carried out at a pressure of 40 MPa and a temperature of 40 °C. DPL is a saturated fatty acid (SFA)-rich fat due to its high SFA composition (47.72 ± 0.01%). In addition, the low content of peroxide value (PV) (5.60 ± 0.09 mEq/kg) and free fatty acids (FFA) (3.40 ± 0.03%) indicate the quality and stability of DPL for various applications besides food consumption. DPL also has a low slip melting point (SMP) (20.20 ± 0.03 °C), and HPLC-FID revealed that DPL contained 0.13 ± 0.02 mg/100 g of vitamin E (α-tocopherol), indicating its potential application as a solid fat with a bioactive compound. This present work demonstrates the possible prospect of DPL in the formulation of end products for food industries.

Analysis of composition, morphology, and biosynthesis of cuticular wax in wild type bilberry (Vaccinium myrtillus L.) and its glossy mutant

In this study, cuticular wax load, its chemical composition, and biosynthesis, was studied during development of wild type (WT) bilberry fruit and its natural glossy type (GT) mutant. GT fruit cuticular wax load was comparable with WT fruits. In both, the proportion of triterpenoids decreased during fruit development concomitant with increasing proportions of total aliphatic compounds. In GT fruit, a higher proportion of triterpenoids in cuticular wax was accompanied by a lower proportion of fatty acids and ketones compared to WT fruit as well as lower density of crystalloid structures on berry surfaces. Our results suggest that the glossy phenotype could be caused by the absence of rod-like structures in GT fruit associated with reduction in proportions of ketones and fatty acids in the cuticular wax. Especially CER26-like, FAR2, CER3-like, LTP, MIXTA, and BAS genes showed fruit skin preferential expression patterns indicating their role in cuticular wax biosynthesis and secretion.

Brief characteristics of oxidative stability, fatty acids and metal content in selected berry seed extracts obtained by the SFE technique and used as potential source of nutrients

Berry seeds are rich source of high quality oil containing valuable compounds such as polyunsaturated fatty acids and therefore, have been gaining increasing significance as potential source of nutrients for food, cosmetic or pharmaceutical industry. Supercritical carbon dioxide extraction of seeds was performed, for which oxidative stability analyzes and determinations of fatty acids, selected microelements and toxic metals were carried out. An attempt was made to evaluate unclassified scCO₂ oil extracts from berry seeds, taking into account the lack of legislative documents specifying the required contents of metals and biologically active ingredients. The obtained extracts are products with the consistency of liquid oil. The total fatty acid content range from 59% to 98%, with unsaturated fatty acids predominating and very good n-3/n-6 fatty acids ratio. The analyzed samples were taken systematically from one extraction sequence also determining the acid and the peroxide values in subsequent fractions.

Supercritical Fluid Extraction Kinetics of Cherry Seed Oil: Kinetics Modeling and ANN Optimization

This study was primarily focused on the supercritical fluid extraction (SFE) of cherry seed oil and the optimization of the process using sequential extraction kinetics modeling and artificial neural networks (ANN). The SFE study was organized according to Box-Behnken design of experiment, with additional runs. Pressure, temperature and flow rate were chosen as independent variables. Five well known empirical kinetic models and three mass-transfer kinetics models based on the Sovová’s solution of SFE equations were successfully applied for kinetics modeling. The developed mass-transfer models exhibited better fit of experimental data, according to the calculated statistical tests (R², SSE and AARD). The initial slope of the SFE curve was evaluated as an output variable in the ANN optimization. The obtained results suggested that it is advisable to lead SFE process at an increased pressure and CO₂ flow rate with lower temperature and particle size values to reach a maximal initial slope.

Red Raspberry (Rubus idaeus L.) Seed Oil: A Review

Raspberry (Rubus idaeus L.) seed oil (RSO) is considered as a source of high value bioactive compounds as fatty acids, tocopherols, tocotrienols, carotenoids, flavonoids, phytosterols, antioxidants, monoterpenes and many other chemical constituents. These compounds are appreciated as a source of nutrition for humans, as additives in cosmetic production, has immense therapeutic potential. Raspberry seed oil exerts many pharmacological effects included antimicrobial, antioxidant, anti-inflammatory activity and many other effects. The various databases like PubMed and Science Direct were used to identify, analyze and summarize the research literature on raspberries. This review will highlight recent developments of the chemical constituents and nutraceutical and cosmetical effects of RSO. Practical application: analyzed recent researches and international patents containing raspberry seed oil can help practitioners of various industries create new high-value products.

Old Plant, New Possibilities: Wild Bilberry (Vaccinium myrtillus L., Ericaceae) in Topical Skin Preparation

Bilberry represents a valuable source of antioxidant substances responsible for its application for the treatment of different conditions (such as inflammation, cardiovascular disease, cancer, diabetes, and different age-related diseases) associated with increased oxidative stress. As oxidative stress might cause skin impairments, we aim to evaluate a topical preparation containing bilberry leaves extract and bilberry seeds oil, obtained as a byproduct of the food industry. To obtain the extracts, the conventional maceration technique for leaves, and supercritical carbon dioxide extraction for seeds were employed. The chemical profile of both actives was achieved by HPLC and GC methods, revealing the presence of phenolic acids (chlorogenic being the most abundant), flavonoids (isoquercetin in the highest amount), and resveratrol in leaves extract, while in seeds oil the essential ω-3 and ω-6 fatty acids were determined in favorable ratio, almost being 1. Antioxidant potential of the wild bilberry extract and seed oil was evaluated using in vitro DPPH and FRAP assays. Finally, effects of the oil-in-water creams with mentioned wild bilberry isolates on the skin were investigated in an in vivo study conducted on healthy human volunteers, revealing the significant beneficial effects when topically applied.

From winery waste to bioactive compounds and new polymeric biocomposites: A contribution to the circular economy concept

The paper aims at optimising and validating possible routes toward the full valorisation of grape agrowaste to produce bioactive molecules and new materials. Starting from Merlot red pomace, phenol complex mixtures were successfully extracted by using two different approaches. Extracts obtained by solvent-based (SE) technique contained up to 46.9 gGAeq/kgDW of total phenols. Depending on the used solvent, the prevalence of compounds belonging to different phenol families was achieved. Pressurized liquid extraction (PLE) gave higher total phenol yields (up to 79 gGAeq/kgDW) but a lower range of extracted compounds. All liquid extracts exerted strong antioxidant properties. Moreover, both SE and PLE extraction solid residues were directly exploited (between 5 and 20% w/w) to prepare biocomposite materials by direct mixing via an eco-friendly approach with PHBV polymer. The final composites showed mechanical characteristics similar to PHVB matrix. The use of pomace residues in biocomposites could therefore bring both to the reduction of the cost of the final material, as a lower amount of costly PHBV is used. The present research demonstrated the full valorisation of grape pomace, an agrowaste produced every year in large amounts and having a significant environmental impact.

Fruit Seeds as Sources of Bioactive Compounds: Sustainable Production of High Value-Added Ingredients from By-Products within Circular Economy

The circular economy is an umbrella concept that applies different mechanisms aiming to minimize waste generation, thus decoupling economic growth from natural resources. Each year, an estimated one-third of all food produced is wasted; this is equivalent to 1.3 billion tons of food, which is worth around US$1 trillion or even $2.6 trillion when social and economic costs are included. In the fruit and vegetable sector, 45% of the total produced amount is lost in the production (post-harvest, processing, and distribution) and consumption chains. Therefore, it is necessary to find new technological and environmentally friendly solutions to utilize fruit wastes as new raw materials to develop and scale up the production of high value-added products and ingredients. Considering that the production and consumption of fruits has increased in the last years and following the need to find the sustainable use of different fruit side streams, this work aimed to describe the chemical composition and bioactivity of different fruit seeds consumed worldwide. A comprehensive focus is given on the extraction techniques of water-soluble and lipophilic compounds and in vitro/in vivo functionalities, and the link between chemical composition and observed activity is holistically explained.