Optimization and Preliminary Physicochemical Characterization of Pectin Extraction from Watermelon Rind (Citrullus lanatus) with Citric Acid

Extraction of pectin from watermelon rinds using sequential ultrasound-microwave technique: Optimization using RSM and ANN modeling and characterization

This study aimed to optimize pectin extraction from watermelon (Citrullus lanatus) rind using sequential ultrasound-microwave assisted extraction (UMAE) with artificial neural network (ANN) and response surface methodology (RSM). The effects of pH, sonication time, microwave power, and irradiation time on pectin yield were evaluated. The ANN model showed higher precision in predicting yield compared to the RSM model. The optimal yield was 32.11 % under the conditions of pH 2.01, sonication time 54.23 min, microwave power 900 watts, and irradiation time 6.34 min. This study evaluated the effects of different extraction techniques, including ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), and microwave-ultrasound-assisted extraction (MUAE), on pectin yield and their physicochemical properties under optimal UMAE conditions. The highest pectin yield was achieved with UMAE, followed by MUAE, MAE, and UAE. The Fourier transform infrared spectroscopy (FTIR) analysis confirmed the presence of homogalacturonan, galacturonic acid backbone, and methyl esters in the extracted pectin. The viscosity study revealed that the pectin solution showed pseudoplastic behavior at 0.2 % w/v. All extracted pectin in different methods had high-methoxy content ranging from 7.68 ± 0.56 % to 11.96 ± 1.29 % and a degree of esterification between 56.55 ± 0.68 % and 63.43 ± 1.54 %. However, UMAE showed significantly lower energy consumption and CO2 emissions, suggesting it as a sustainable approach for pectin extraction from watermelon rind.

Deciphering Pectin: A Comprehensive Overview of Its Origins, Processing, and Promising Utility

Pectin is an acidic heteropolysaccharide, a natural high molecular weight compound primarily found in higher plants. It consists of four major structural domains: homogalacturonan (HG), rhamnogalacturonan II (RG-II), rhamnogalacturonan I (RG-I), and xylogalacturonan (XGA). Various methods are currently employed for pectin extraction, including acid extraction, microbial fermentation, microwave-assisted extraction, and ion extraction, each with unique advantages and disadvantages. Pectin is sourced from fruits and vegetables, such as citrus fruits, apples, beets, and carrots. In terms of regulating human health, pectin enhances antioxidant activity, promotes beneficial microorganisms, and stimulates the production of short-chain fatty acids (SCFAs) through microbial metabolism. Additionally, pectin interacts directly with the mucosa, inhibits Toll-like receptor 2 (TLR2) signaling, and modifies the glycosylation of intestinal mucosal proteins. In disease models, pectin shows preventive and therapeutic effects in inflammatory bowel disease, type 2 diabetes, obesity, cardiovascular disease, and cancer. This review covers recent research, summarizing the sources and extraction methods of pectin, and emphasizes its role as a modulator of human health.

Optimizing Pectin Yield From Burmese Grape (Baccaurea ramiflora) Peels Using Box-Behnken Design and Quality Evaluation

Pectin, a polysaccharide, is widely used as a gelling and thickening agent in the food industry. This study undertook optimization of pectin extraction from the peels of Baccaurea ramiflora Lour. (Burmese grape or lotkon), an abundantly grown wild fruit in Bangladesh. We applied the Box-Behnken Design of Response Surface Methodology with varied processing parameters including pH, time, and temperature. The Response Surface Methodology, employing a second-order polynomial model, successfully optimized the extraction conditions for the maximum pectin yield. The model predicted a pectin yield of 10.73%, which closely matched the experimental yield of 10.56%. The optimal conditions for pectin extraction were determined as pH (2.4), extraction time (56 min), and temperature (76°C). Further analyses of the extracted pectin under optimized conditions confirmed its excellent potential for food applications. The pectin was characterized by its moisture content (10.42%), water activity (0.51), ash content (3.41%), equivalent weight (769.23 mg/mole), methoxyl content (7.75%), anhydrouronic acid content (66.88%), degree of esterification (65.79%), and acetyl value (0.39%). These determined parameters strongly support that the pectin extracted from the peels of Burmese grapes is of good quality.

Source, Extraction, Properties, and Multifunctional Applications of Pectin: A Short Review

Pectin, a heteropolysaccharide derived from plant cell walls, is essential in the food, pharmaceutical, and environmental industries. Currently, citrus and apple peels are the primary sources for commercial pectin production. The yield and quality of pectin extracted from various plant sources significantly differ based on the extraction methods employed, which include physical, chemical, and biological processes. The complex structures of pectin, composed of polygalacturonic acid and rhamnogalacturonan, influence its physicochemical properties and, consequently, its functionality. As a common polysaccharide, pectin finds applications across multiple sectors. In the food industry, it acts as a gelling agent and a packaging material; in pharmaceuticals, it is utilized for drug delivery and wound healing. Environmentally, pectin contributes to wastewater treatment by adsorbing pollutants. Current research focuses on alternative sources, sustainable extraction methods, and multifunctional applications of pectin. Ongoing studies aim to enhance extraction technologies and broaden the applications of pectin, thereby supporting sustainable development goals.

Comparative study on thermo-mechanical, structural and functional properties of pectin extracted from immature wasted apples and commercial pectin

Pectin yield of 22.22 ± 0.98 % (dry basis) was achieved from prematurely dropped Golden Delicious apples, having a light orange hue (hue value: 78.08 ± 0.04) and an overall color difference (ΔE) of 9.92 ± 0.01 compared to commercial pectin (CP). Extracted AP exhibited a lower equivalent weight (725.24 ± 29.73) and higher methoxy content (8.36 ± 0.28 %) in contrast to CP. However, a similar degree of esterification of 71.57 ± 0.79 and 70.55 ± 0.59 %, was observed in AP and CP respectively. Apple pectin demonstrated slight lower galacturonic acid (GalA) content of 68.10 ± 3.94 % in comparison to 72.31 ± 4.62 % of CP, which was further corroborated by reduced intensity in FTIR fingerprint region (912-1025 cm-1). Morphology revealed a sheet-like cloudy appearance indicating a significant presence of associated sugars whereas X-ray diffraction highlighted the highly amorphous nature of AP. AP and CP solutions (3-9 %) displayed a shear-thinning flow and viscoelastic behavior where the loss (G') moduli dominated over the storage moduli (G"). Owing to high degree of esterification, galacturonic acid content (>65 %) that aligns with commercial standards and viscoelastic behavior, the extracted AP holds promise for potential utilization in commercial applications. This study underscores the potential for sustainable utilization of prematurely dropped apples through pectin extraction, contributing to valorization of the wasted bioresource.

Pharmaceutical Assessment of the Impact of the Method of Extraction on the Suitability of Pectin from Plantain (Musa paradisiaca) Peels as a Suspending Agent in Oral Liquid Formulations

Natural polymers such as pectin have gained increased utilization in pharmaceutical and biotechnology sectors because they are affordable, easily accessible, nontoxic, and chemically modifiable, with the potential to be biodegradable and biocompatible. Musa paradisiaca (plantain) peels make up 30-40% of the overall weight of the fruit. The extraction of pectin from these residues can therefore be viewed as a possible waste of wealth. This study, therefore, focused on evaluating the suspending properties of pectin obtained from Musa paradisiaca (plantain) peels (through acid and alkaline extraction) and presented an alternative suspending agent in the pharmaceutical formulation of suspensions. The unripe peels of Musa paradisiaca were acquired and authenticated at the Department of Pharmacognosy, Faculty of Pharmacy and Pharmaceutical Sciences, Kwame Nkrumah University of Science and Technology (KNUST), Kumasi, Ghana. Pectin was extracted from the peels using both acid and alkaline extraction processes, respectively, characterized, and evaluated for its phytochemical properties. Different concentrations of the acid and alkaline pectin extracts were employed as a suspending agent in paracetamol suspensions, using acacia gum as a standard. The pectin yields obtained were 4.88% and 7.61% for the acid and alkaline extraction processes, respectively, while phytochemical screening revealed the presence of glycosides, tannins, saponins, and phenols in both extracts. The alkaline pectin extract recorded higher equivalent weight, degree of esterification, ash content, and crude content than the acid pectin extract, while FTIR identified similar functional groups in both acid and alkaline pectin extracts. The test suspensions reported significant differences (P < 0.05) in flow rates, ease of redispersion, sedimentation volumes, and rates compared with acacia gum. Moreover, when the acid and alkaline pectin extracts were compared, significant differences (P < 0.05) were observed in sedimentation rates and sedimentation volumes, suggesting that the extraction method may affect suspending properties. Ultimately, the alkaline pectin extract had better suspending properties than the acid pectin extract; however, they both can be used as an alternative to acacia gum as a suspending agent.

Eco-friendly simultaneous extraction of pectins and phenolics from passion fruit (Passiflora edulis Sims) peel: Process optimization, physicochemical properties, and antioxidant activity

The objective of this study was to simultaneously extract passion fruit (Passiflora edulis) peel pectins and phenolics using deep eutectic solvents, to evaluate their physicochemical properties and antioxidant activity. By taking L-proline: citric acid (Pro-CA) as the optimal solvent, the effect of extraction parameters on the yields of extracted passion fruit peel pectins (PFPP) and total phenolic content (TPC) was. and the highest TPC (9.68 mg GAE/g DW) were attained under 90 °C, extraction solvent pH = 2, extraction time of 120 min and L/S ratio of 20 mL/g. In addition, Pro-CA-extracted pectins (Pro-CA-PFPP) and HCl-extracted pectins (HCl-PFPP) were subjected to high performance gel permeation chromatography (HPGPC), Fourier transform infrared spectroscopy (FT-IR), thermogram analysis (TG/DTG) and rheological measurements. Results verified that the Mw and thermal stability of Pro-CA-PFPP were higher than those of HCl-PFPP. The PFPP solutions featured a non-Newtonian behavior, and compared with commercially pectin solution, PFPP solution exhibited a stronger antioxidant activity. Additionally, passion fruit peel extract (PFPE) exhibited stronger antioxidant effects than PFPP. The results of ultra-performance liquid chromatography hybrid triple quadrupole-linear ion trap mass spectrometry (UPLC-Qtrap-MS) and high performance liquid chromatography (HPLC) analysis showed that (-)-epigallocatechin, gallic acid, epicatechin, kaempferol-3-O-rutin and myricetin were the main phenolic compounds in PFPE and PFPP. Our results suggest that Pro-CA can be considered as an eco-friendly solvent for high-efficient extraction of high-value compounds from agricultural by-products.

Current progress in valorization of food processing waste and by-products for pectin extraction

Food processing waste and by-products such as peel of citrus fruit, melon, mango, pineapple, etc. and fruit pomace can be utilized for manufacturing of several high-value products. Valorization of these waste and by-products for extraction of pectin, can help offset growing environmental concerns, facilitate value-addition of by-products and their sustainable uses. Pectin has many applications in food industries such as gelling, thickening, stabilizing, and emulsifying agent, and as a dietary fibre. This review elaborates on various conventional and advanced, sustainable pectin extraction techniques, and paints a comparative picture between them considering extraction efficiency, quality, and functionality of the pectin. Conventional acid, alkali, and chelating agents-assisted extraction have been profusely used for pectin extraction, but advanced extraction technologies e.g., enzyme, microwave, supercritical water, ultrasonication, pulse electric field and high-pressure extraction are preferred due to less energy consumption, better quality product, higher yield, and minimal or no generation of harmful effluent.

Pharmaceutical Assessment of Watermelon Rind Pectin as a Suspending Agent in Oral Liquid Dosage Forms

Pectin is a high molecular weight polymer which is present in virtually all plants where it contributes to the cell structure. Pectin is a high valuable food ingredient widely used as a gelling agent and thickening agent with limited use in the pharmaceutical industry. The objective of this study is to evaluate the suspending properties of pectin from watermelon rind. Tragacanth was used as a standard suspending agent to which the suspending properties of pectin from watermelon rinds were compared with. The extracted pectin was subjected to phytochemical and physiochemical characterization for its safety and suitability to use as a suspending agent. Paracetamol suspensions were formulated using tragacanth concentrations of 0.5% w/v, 1% w/v, and 2% w/v and compared with paracetamol suspensions containing the same concentrations of watermelon pectin. The suspensions were all tested for their pH, sedimentation rate, sedimentation volume, flow rate, and ease of redispersibility over a period of 4 weeks. At the end of the 4-week period, all formulated suspensions had no changes in their pH values. Suspensions containing the extracted pectin had a lower rate of sedimentation and ease of redispersibility compared to that of tragacanth. In addition, their sedimentation volumes as well as flow rates were comparable to that of the tragacanth formulations. Ultimately, pectin from watermelon rind can serve as a suitable alternative to tragacanth in formulation of pharmaceutical suspensions.

High-Intensity Ultrasound-Assisted Extraction of Pectin from Mango Wastes at Different Maturity

Valorisation of food processing by-products is a welcome and developing area. The mango processing industry produces 40% to 60% of the fruit as solid waste, in which components of industrial interest, such as pectin, are lost. This study reports on energy-efficient high-intensity ultrasound-assisted extraction (HIUAE) to extract pectin from mango peels. The analysis considered the ripening stage of the fruit (0, 2, and 4), HIUAE frequency (37 kHz and 80 kHz), and extraction time (20 min, 25 min, and 30 min). Extractions of pectin from mango peels with HIUAE have been fairly studied. However, this work differs from those studies in including mango maturity grade as a factor. Pectin extraction yields ranged from 13% to 30%, with no influence (p > 0.05) of time, and the highest yields were obtained at the lowest maturity stage (0) and lowest frequency (37 kHz). This latest condition (37 kHz) also yielded pectin with the highest gel strength, purity, and quality. This work demonstrated that the mango maturity stage influenced pectin extraction yield. Ultrasound-assisted extraction of pectin from mango peels could be an efficient approach toward waste valorisation and extraction of pectin with high yield and good quality attributes for the food industry.