Development of a low-metal adhesive tape to detect and localize metals in or on the stratum corneum at parts per million levels

Influence of repeated contacts on the transfer of elemental metallic lead between compartments in an integrated conceptual model for dermal exposure assessment

Transfer of contaminants to and from the skin surface has been postulated to occur through a number of different pathways and compartments including: object(s)-to-skin, skin-to-skin, skin-to-clothing, skin-to-gloves, air-to-skin, skin-to-lips, and skin-to-saliva. However, many identified transfer pathways have been only minimally examined to determine the potential for measurable transfer. The purpose of this study was to quantitatively evaluate repeated transfer between different compartments using elemental metallic lead (Pb) in the solid form using a series of systematic measurements in human subjects. The results demonstrated that some transfer pathways and compartments are significantly more important than others. Transfer of Pb could not be measured from skin to cotton clothing or skin to laminate countertop surfaces. However, transfer was consistently measured for skin-to-skin and between the skin and the surface of nitrile gloves, suggesting the potential for significant transfer to or from these compartments in real-world exposure scenarios, and the importance of these pathways. With repeated contacts, transfer increased non-linearly between 1 and 5 contacts, but appeared to approach a steady state distribution among the compartments within 10 contacts. Consistent with other studies, relative to 100% transfer for a single contact, the quantitative transfer efficiency decreased with repeated contacts to 29% after 5 contacts and 11-12% after 10 contacts; for skin-to-skin transfer measurements, transfer efficiency after either 5 or 10 contacts was approximately 50% of the single contact transfer. These data are likely to be useful for refining current approaches to modeling of repeated contacts for dermal exposure and risk assessment.

Dermal and inhalation exposure to methylene bisphenyl isocyanate (MDI) in iron foundry workers

Diisocyanates are a group of chemically reactive agents, which are used in the production of coatings, adhesives, polyurethane foams, and parts for the automotive industry and as curing agents for cores in the foundry industry. Dermal and inhalation exposure to methylene bisphenyl isocyanate (MDI) is associated with respiratory sensitization and occupational asthma. However, limited research has been performed on the quantitative evaluation of dermal and inhalation exposure to MDI in occupationally exposed workers. The objective of this research was to quantify dermal and inhalation exposure levels in iron foundry workers. Workers involved in mechanized moulding and mechanized production of cores were monitored: 12 core makers, 2 core-sand preparers, and 5 core installers. Personal breathing-zone levels of MDI were measured using impregnated filter sampling. Dermal exposure to MDI was measured using a tape-strip technique. Three or five consecutive tape-strip samples were collected from five exposed skin areas (right and left forefingers, left and right wrists, and forehead). The average personal air concentration was 0.55 microg m(-3), 50-fold lower than the Swedish occupational exposure limit of 30 microg m(-3). The core makers had an average exposure of 0.77 microg m(-3), which was not significantly different from core installers' and core-sand preparers' average exposure of 0.16 microg m(-3) (P = 0.059). Three core makers had a 10-fold higher inhalation exposure than the other core makers. The core makers' mean dermal exposure at different skin sites varied from 0.13 to 0.34 microg while the two other groups' exposure ranged from 0.006 to 0.062 microg. No significant difference was observed in the MDI levels between the skin sites in a pairwise comparison, except for left forefinger compared to left and right wrist (P < 0.05). In addition, quantifiable but decreasing levels of MDI were observed in the consecutive tape strip per site indicating MDI penetration into the skin. This study indicates that exposure to MDI can be quantified on workers' skin even if air levels are close to unquantifiable. Thus, the potential for uncured MDI to deposit on and penetrate into the skin is demonstrated. Therefore, dermal exposure along with inhalation exposure to MDI should be measured in the occupational settings where MDI is present in order to shed light on their roles in the development of occupational isocyanate asthma.

Laparoscopic radical nephrectomy for advanced kidney cancer

The management of advanced renal cell carcinoma (RCC) continues to evolve. With the advent of laparoscopic radical nephrectomy (LRN), minimally invasive approaches to kidney cancer have developed. Laparoscopic resection of locally advanced RCC yields a similar cancer-control rate with the advantage of decreased morbidity. Although cytoreductive LRN is a technically challenging procedure, it may be completed safely in selected patients. Further prospective study of the role of LRN for advanced RCC is warranted.