Collagen fibril patterns in compact bone: preliminary ultrastructural observations

Morphometry and patterns of lamellar bone in human Haversian systems

The lamellar architecture of secondary osteons (Haversian systems) has been studied with scanning electron microscopy (SEM) in transverse sections of human cortical bone. Na(3) PO(4) etching was used to improve the resolution of the interface between neighboring lamellae and the precision of measurements. These technical improvements permitted testing of earlier morphometry assumptions concerning lamellar thickness while revealing the existence of different lamellar patterns. The mean lamellar thickness was 9.0 ± 2.13 μm, thicker and with a wider range of variation with respect to earlier measurements. The number of lamellae showed a direct correlation with the lamellar bone area, and their thickness had a random distribution for osteonal size classes. The circular, concentrical pattern was the more frequently observed, but spiral and crescent-moon-shaped lamellae were also documented. Selected osteons were examined by either SEM or SEM combined with polarized light microscopy allowing comparisons of corresponding sectors of the osteon. The bright bands observed with polarized light corresponded to the grooves observed in etched sections by SEM. The dark bands corresponded to the lamellar surface with the cut fibrils oriented approximately longitudinally along the central canal axis. However, lamellae with large and blurred bright bands could be observed, which did not correspond to a groove observed by SEM. These findings are in contrast with the assumption that all the fibril layers within a lamella are oriented along a constant and unchangeable angle. The different lamellar patterns may be explained by the synchronous or staggered recruitment and activation of osteoblasts committed to the osteon's completion.

The fibrillar organisation of the osteon and cellular aspects of its development : a morphological study using the SEM fractured cortex technique

The collagen architecture of secondary osteons was studied with scanning electron microscopy (SEM) employing the fractured cortex technique and osmic maceration. Fibrillar orientation and the change in their direction in sequential lamellae was documented where lamellar formation was ongoing, as well as in resorption pits where osteoclasts had exposed the collagen organisation of the underlying layers. Applying an adaptive stereo matching technique, the mean thickness of matrix layers removed by osteoclasts was 1.36 ± 0.45 μm. It was also documented that osteoclasts do not attack the cellular membrane of the exposed osteocytes. The mean linear osteoblast density in fractured hemicanals was assessed with SEM and no significant differences were observed comparing larger with smaller central canal osteons. These findings suggested a balance between the differentiated osteoblasts that have aligned on the surface of the cutting cone and those that are transformed into osteocytes, because the canal surface is progressively reduced as the lamellar apposition advances.

Post-yield nanomechanics of human cortical bone in compression using synchrotron X-ray scattering techniques

The ultrastructural response to applied loads governs the post-yield deformation and failure behavior of bone, and is correlated with bone fragility fractures. Combining a novel progressive loading protocol and synchrotron X-ray scattering techniques, this study investigated the correlation of the local deformation (i.e., internal strains of the mineral and collagen phases) with the bulk mechanical behavior of bone. The results indicated that the internal strains of the longitudinally oriented collagen fibrils and mineral crystals increased almost linearly with respect to the macroscopic strain prior to yielding, but markedly decreased first and then gradually leveled off after yielding. Similar changes were also observed in the applied stress before and after yielding of bone. However, the collagen to mineral strain ratio remained nearly constant throughout the loading process. In addition, the internal strains of longitudinal mineral and collagen phases did not exhibit a linear relationship with either the modulus loss or the plastic deformation of bulk bone tissue. Finally, the time-dependent response of local deformation in the mineral phase was observed after yielding. Based on the results, we speculate that the mineral crystals and collagen fibrils aligned with the loading axis only partially explain the post-yield deformation, suggesting that shear deformation involving obliquely oriented crystals and fibrils (off axis) is dominant mechanism of yielding for human cortical bone in compression.

Tensile behavior of cortical bone: Dependence of organic matrix material properties on bone mineral content

A porous composite model is developed to analyze the tensile mechanical properties of cortical bone. The effects of microporosity (volksman's canals, osteocyte lacunae) on the mechanical properties of bone tissue are taken into account. A simple shear lag theory, wherein tensile loads are transferred between overlapped mineral platelets by shearing of the organic matrix, is used to model the reinforcement provided by mineral platelets. It is assumed that the organic matrix is elastic in tension and elastic-perfectly plastic in shear until it fails. When organic matrix shear stresses at the ends of mineral platelets reach their yield values, the stress-strain curve of bone tissue starts to deviate from linear behavior. This is referred as the microscopic yield point. At the point where the stress-strain behavior of bone shows a sharp curvature, the organic phase reaches its shear yield stress value over the entire platelet. This is referred as the macroscopic yield point. It is assumed that after macroscopic yield, mineral platelets cannot contribute to the load bearing capacity of bone and that the mechanical behavior of cortical bone tissue is determined by the organic phase only. Bone fails when the principal stress of the organic matrix is reached. By assuming that mechanical properties of the organic matrix are dependent on bone mineral content below the macroscopic yield point, the model is used to predict the entire tensile mechanical behavior of cortical bone for different mineral contents. It is found that decreased shear yield stresses and organic matrix elastic moduli are required to explain the mechanical behavior of bones with lowered mineral contents. Under these conditions, the predicted values (elastic modulus, 0.002 yield stress and strain, and ultimate stress and strain) are within 15% of experimental data.

'Universal' microstructural patterns in cortical and trabecular, extracellular and extravascular bone materials: micromechanics-based prediction of anisotropic elasticity

Bone materials are characterized by an astonishing variability and diversity. Still, because of 'architectural constraints' due to once chosen material constituents and their physical interaction, the fundamental hierarchical organization or basic building plans of bone materials remain largely unchanged during biological evolution. Such universal patterns of microstructural organization govern the mechanical interaction of the elementary components of bone (hydroxyapatite, collagen, water; with directly measurable tissue-independent elastic properties), which are here quantified through a multiscale homogenization scheme delivering effective elastic properties of bone materials: at a scale of 10nm, long cylindrical collagen molecules, attached to each other at their ends by approximately 1.5nm long crosslinks and hosting intermolecular water inbetween, form a contiguous matrix called wet collagen. At a scale of several hundred nanometers, wet collagen and mineral crystal agglomerations interpenetrate each other, forming the mineralized fibril. At a scale of 5-10microm, the extracellular solid bone matrix is represented as collagen fibril inclusions embedded in a foam of largely disordered (extrafibrillar) mineral crystals. At a scale above the ultrastructure, where lacunae are embedded in extracellular bone matrix, the extravascular bone material is observed. Model estimates predicted from tissue-specific composition data gained from a multitude of chemical and physical tests agree remarkably well with corresponding acoustic stiffness experiments across a variety of cortical and trabecular, extracellular and extravascular materials. Besides from reconciling the well-documented, seemingly opposed concepts of 'mineral-reinforced collagen matrix' and 'collagen-reinforced mineral matrix' for bone ultrastructure, this approach opens new possibilities in the exploitation of computer tomographic data for nano-to-macro mechanics of bone organs.

The TEM characterization of the lamellar structure of osteoporotic human trabecular bone

The lamellar structure of osteoporotic human trabecular bone was characterized experimentally by means of transmission electron microscopy (TEM). More specifically, the TEM was used to determine if trabecular bone exhibits similar lamellar structural motifs as cortical bone by analyzing unmineralized, mineralized and demineralized bone, and to study the influence of the osteocyte network on the lamellar structure of osteoporotic trabecular bone. Comparison with normal trabecular bone is included. This paper summarizes partial results of a larger study, which addressed the characterization of the hierarchical structure of normal versus osteoporotic human trabecular bone [Rubin, M.A., 2001. Multiscale characterization of the ultrastructure of trabecular bone in osteoporotic and normal humans and in two inbred strains of mice. MS Thesis, Georgia Institute of Technology.] at several structural scales.

Enhanced intrinsic biomechanical properties of osteoblastic mineralized tissue on roughened titanium surface

The biological mechanisms underlying bone-titanium integration and biomechanical properties of the integrated bone are poorly understood. This study assesses intrinsic biomechanical properties of mineralized tissue cultured on titanium having different surface topographies. The osteoblastic phenotypes associated with mineral deposition and collagen synthesis underlying the biomechanical modulation are also reported. Rat bone marrow-derived osteoblastic cells were cultured either on the machined titanium disc or acid-etched titanium disc. Nano-indentation study of day 28 culture revealed that the mineralized tissue on the acid-etched surface shows 3-3.5 times greater hardness than that on the machined surface (p < 0.01). Elastic modulus of the mineralized tissue was also 2.5-3 times greater on the acid-etched surface than on the machined surface (p < 0.01). After 28 days of culture, mineralized nodule area was significantly lower on the acid-etched surface than on the machined surface (p = 0.0105), while total calcium deposition did not differ between the two surfaces, indicating denser mineral deposition on the acid-etched surface. Osteopontin and osteocalcin gene expressions assayed by the reverse transcriptase-polymerase chain reaction were upregulated in the acid-etched titanium culture. Collagen synthesis measured by Sirius red stain-based colorimetry was 1.5-10 times higher on the acid-etched surface than on the machined surface in the initial culture period of day 1 to day 14 (p < 0.0001). The amount of collagen synthesis corresponded with the enhanced gene expression of prolyl 4-hydroxylase, a key enzyme for post-translational modification of collagen chains. Scanning electron microscopic images revealed that tissue cultured on the acid-etched titanium exhibited plate-like, compact surface morphology, while the tissue on the machined titanium appeared porous and was covered by fibrous and punctate structures. We conclude that culturing osteoblasts on rougher titanium surfaces enhances hardness and elastic modulus of the mineralized tissue, associated with condensed mineralization, accelerated collagen synthesis, and upregulated expression of selected bone-related genes.

Structural differences between "dark" and "bright" isolated human osteonic lamellae

This investigation presents new insights into the structure of human secondary lamellae. Lamellar specimens that appear dark and bright on alternate osteon transverse sections under circularly polarizing light were isolated using a new technique, and examined by polarizing light microscopy, synchrotron X-ray diffraction, and confocal microscopy. A distribution of unidirectional collagen bundles and of two overlapping oblique bundles appears on circularly polarizing light microscopy images in relation to the angle between the specimen and the crossed Nicols' planes. The unidirectional collagen bundles observed at 45 degrees run parallel to the osteon axis in the dark lamellar specimens and perpendicular to it in the bright ones. Small and wide-angle micro-focus X-ray diffraction indicates that the dark lamellae are structurally quite homogeneous, with collagen fibers and apatite crystals preferentially oriented parallel to the osteon axis. Bright lamellar specimens exhibit different orientation patterns with the dominant ones bidirectional at +/-45 degrees with respect to the osteon axis. Accordingly, confocal microscopy evidences the presence of longitudinal bundles in dark lamellar specimens and oblique bundles in the bright ones. Radial bundles are evidenced in both lamellar types. The alternate osteon structure is described by a rather continuous multidirectional pattern, in which dark and bright lamellae display different mechanical and possibly biological functions.

Collagen structure and functional implications

The bio-mechanical requirements to which the connective tissue is subjected suggest that a causal correlation exist between the substructure and the collagen fibril function. We discuss the relationship between the inner structure of collagen fibrils, their diameter, their spatial layout and the functional requirements they have to withstand, and suggest that collagen fibrils may belong to two different forms indicated as "T-type" and "C-type". The first class, consisting of large, heterogeneous fibrils, parallely tightly packed, subjected to tensile stress along their axis is found in highly tensile structures such as tendons, ligaments and bone. The other class, consisting of small, homogeneous fibrils, helically arranged, resisting multidirectional stresses, is mostly present within highly compliant tissues such as blood vessel walls, skin and nerve sheaths. What causes these architectures to appear is discussed in detail in this review.

Fine structure of bone in dinosaurs, birds and mammals

After observation of detailed structural evidence for the origin of birds from dinosaurs, and in light of evidence that dinosaur bone tissue resembles the histology in mammals, the histology of bone has become one of the focal points in discussions of the physiology of dinosaurs and Mesozoic birds. Most of this microstructural information has focused on features related to the vascular organization and the amount of remodelled bone around vascular canals. However, the finer structures have received less attention, although differences in such structures have been observed among modern vertebrates. Here we present evidence that canaliculi--the submicrometre-sized channels that interconnect bone cells and vascular canals--and the collagen fibre bundles in bone are differently organized among certain dinosaur lineages. Ornithomimid dinosaurs are more like birds than mammals in these features. In canalicular structure, and to some extent in fibre bundle arrangement, ornithischian dinosaurs are more like mammals. These differences in both canalicular and lamellar structure are probably linked to differences in the process and rate of bone formation.

A first estimation of prestress in so-called circularly fibered osteonic lamellae

The existence and role of prestress in the various hierarchical structures of long bone are long standing questions. In this study, the prestress and associated strain that exist in a component of human bone microstructure, circularly fibered osteonic lamella, are estimated. Such estimates allow the formulation of hypotheses on prestress formation and lamellar stiffness. Dimensional measurements were obtained for eight fully calcified lamellae. These dimensions, before isolation from the surrounding alternate osteon and after strain relief by isolation and axial sectioning, furnish data upon which a geometric lamellar model is constructed. A material model is based on the most likely hypothesis as to lamellar structure. This geometric-material model allows estimation of the preexisting strain. The largest strains occur in shear circumferential-axial and normal axial strain directions, averaging 0.08 and 0.05, respectively. The geometric-material model expresses prestress in terms of as yet unknown elastic moduli. The average prestress magnitude is the largest in shear circumferential-axial direction, compensating for alternate osteon weakness in this direction. The estimated axial prestress confirms long hypothesized alternate osteon precompression, which impedes fractures of areas of collagen bundles transverse to the osteon axis at low stresses. The results of the model support the formulation of the following biological hypotheses: (a) lamellar prestress occurs at a supra-molecular level, namely through collagen bundles which are themselves likely to be prestressed; (b) collagen bundles oblique to the lamellar axis are responsible for shear prestress; (c) prestress ranges up to 0.11 GPa; and (d) the lamella is less stiff than alternate osteon.

Observation of geometric structure of collagen molecules by atomic force microscopy

Atomic force microscopy was used to study the geometric structure of collagen fibrils and molecules of rat calcanean tendon tissues. The authors found that the diameter of the fibrils ranged from 124 to 170 nm, and their geometric form suggested a helical winding with spectral period from 59.4 to 61.7 nm, close to the band dimensions reported by electron microscopy. At high magnification, the surface of these bands revealed images that probably correspond to the almost crystalline array of collagen molecules, with the triple helix structure almost visible. The typical helix width is 1.43 nm, with main periods of 1.15 and 8.03 nm, very close to the dimensions reported by X-ray diffraction.