Protein precoating of elastomeric tissue-engineering scaffolds increased cellularity, enhanced extracellular matrix protein production, and differentially regulated the phenotypes of circulating endothelial progenitor cells

Cytocompatible and biodegradable poly(d,l-lactide-coglycolide)/reduced graphene oxide scaffolds

Applications of graphene in regenerative medicine have attracted the increasing attention of numerous research groups due to the specific properties that confers on biomaterials. In this paper, the degradation behavior of poly(d,l-lactide-co-glycolide (PLGA)/reduced graphene oxide (rGO) scaffolds obtained by thermally induced phase separation (TIPS) and lyophilization was studied in phosphate buffered saline (PBS) solution, at 37 °C during eight weeks. Additionally, the cytotoxicity of the different samples through the metabolic activity of L929 fibroblast cells was also addressed. Scanning electron microscopy tests show that the addition of rGO particles increases the pore size from 60 to 100 µm as well as their morphological definition. Scaffolds with 0.6 and 1% rGO concentrations lost more mass than those with lower filler content, that is, they degraded more quickly. The results obtained by differential scanning calorimetry indicate that the rGO particles restrict the movement of the macromolecular chain segments due to the formation of hydrogen bonds and electrostatic attraction. The electrical conductivity tests show that the addition of rGO leads to a rapid transition from insulating to conductive scaffolds with a percolation value of ≈ 0.5 w/w. All the different PLGA samples with different rGO content up to 1% present no cytotoxic behaviour for L929 fibroblast cells, being therefor suitable for biomedical applications.

Different methods of synthesizing poly(glycerol sebacate) (PGS): A review

Poly(glycerol sebacate) (PGS) is a biodegradable elastomer that has attracted increasing attention as a potential material for applications in biological tissue engineering. The conventional method of synthesis, first described in 2002, is based on the polycondensation of glycerol and sebacic acid, but it is a time-consuming and energy-intensive process. In recent years, new approaches for producing PGS, PGS blends, and PGS copolymers have been reported to not only reduce the time and energy required to obtain the final material but also to adjust the properties and processability of the PGS-based materials based on the desired applications. This review compiles more than 20 years of PGS synthesis reports, reported inconsistencies, and proposed alternatives to more rapidly produce PGS polymer structures or PGS derivatives with tailor-made properties. Synthesis conditions such as temperature, reaction time, reagent ratio, atmosphere, catalysts, microwave-assisted synthesis, and PGS modifications (urethane and acrylate groups, blends, and copolymers) were revisited to present and discuss the diverse alternatives to produce and adapt PGS.

Ocular delivery of sunitinib-loaded nanoparticles doped in tragacanthic acid hydrogel in treatment of diabetic retinopathy in rats

OBJECTIVE

Diabetic retinopathy (DR) is a common microvascular complication of diabetes mellitus. This study aimed to compare the effect of sunitinib-loaded poly (glycerol sebacate) (PGS)/gelatin nanoparticles doped in an injectable hydrogel with bevacizumab as a standard treatment of DR.

METHODS

The shear-sensitive hydrogel was prepared based on tragacanthic acid (TA) cross-linked with sodium acetate. DR was induced in rats by streptozotocin (STZ), and the animals were injected intravitreally a single dose of 20 µL sunitinib solution in three different concentrations (12.5, 25, and 50 µg/mL), sunitinib-loaded nanoparticles in hydrogel (413 μg/mL) and bevacizumab solution (6.25 mg/mL). The efficacy of the treatments was studied by histological and immunohisitological tests, angiogenesis, and optical coherence tomography (OCT). Vascular endothelial growth factor (VEGF) concentration was measured in the retina.

RESULTS

The results revealed that 20 µL of sunitinib with the concentration of 25 µg/mL was effective in DR without any disruption in the retina or any other side effects. This dose was considered the therapeutic dose for nanoparticles. Sunitinib loaded PGS/gelatine nanoparticles that were incorporated in the injectable hydrogel were as effective as bevacizumab in controlling DR. Although sunitinib solution reduced VEGF production and neovascularization in the retina compared to the negative control group, it was not as suitable as the nanoparticles. TA-based hydrogel showed no toxicity on the normal retina, and the angiography and histologic studies confirmed the VEGF results. Conclusions: Sunitinib nanoparticles doped in TA hydrogel may be an appropriate substitution of bevacizumab in the treatment of DR.

Elastin-like Polypeptides in Development of Nanomaterials for Application in the Medical Field

Elastin-like polypeptides (ELPs) are biopolymers formed by amino acid sequences derived from tropoelastin. These biomolecules can be soluble below critical temperatures, forming aggregates at higher temperatures, which makes them an interesting source for the design of different nanobiomaterials. These nanobiomaterials can be obtained from heterologous expression in several organisms such as bacteria, fungi, and plants. Thanks to the many advantages of ELPs, they have been used in the biomedical field to develop nanoparticles, nanofibers, and nanocomposites. These nanostructures can be used in multiple applications such as drug delivery systems, treatments of type 2 diabetes, cardiovascular diseases, tissue repair, and cancer therapy. Thus, this review aims to shed some light on the main advances in elastin-like-based nanomaterials, their possible expression forms, and importance to the medical field.

Biodegradable and biomimetic elastomeric scaffolds for tissue-engineered heart valves

Valvular heart diseases are the third leading cause of cardiovascular disease, resulting in more than 25,000 deaths annually in the United States. Heart valve tissue engineering (HVTE) has emerged as a putative treatment strategy such that the designed construct would ideally withstand native dynamic mechanical environment, guide regeneration of the diseased tissue and more importantly, have the ability to grow with the patient. These desired functions could be achieved by biomimetic design of tissue-engineered constructs that recapitulate in vivo heart valve microenvironment with biomimetic architecture, optimal mechanical properties and possess suitable biodegradability and biocompatibility. Synthetic biodegradable elastomers have gained interest in HVTE due to their excellent mechanical compliance, controllable chemical structure and tunable degradability. This review focuses on the state-of-art strategies to engineer biomimetic elastomeric scaffolds for HVTE. We first discuss the various types of biodegradable synthetic elastomers and their key properties. We then highlight tissue engineering approaches to recreate some of the features in the heart valve microenvironment such as anisotropic and hierarchical tri-layered architecture, mechanical anisotropy and biocompatibility.

STATEMENT OF SIGNIFICANCE

Heart valve tissue engineering (HVTE) is of special significance to overcome the drawbacks of current valve replacements. Although biodegradable synthetic elastomers have emerged as promising materials for HVTE, a mature HVTE construct made from synthetic elastomers for clinical use remains to be developed. Hence, this review summarized various types of biodegradable synthetic elastomers and their key properties. The major focus that distinguishes this review from the current literature is the thorough discussion on the key features of native valve microenvironments and various up-and-coming approaches to engineer synthetic elastomers to recreate these features such as anisotropic tri-layered architecture, mechanical anisotropy, biodegradability and biocompatibility. This review is envisioned to inspire and instruct the design of functional HVTE constructs and facilitate their clinical translation.

Poly(Limonene Thioether) Scaffold for Tissue Engineering

A photocurable thiol-ene network polymer, poly(limonene thioether) (PLT32o), is synthesized, characterized, fabricated into tissue engineering scaffolds, and demonstrated in vitro and in vivo. Micromolded PLT32o grids exhibit compliant, elastomeric mechanical behavior similar to grids made of poly(glycerol sebacate) (PGS), an established biomaterial. Multilayered PL32o scaffolds with regular, geometrically defined pore architectures support heart cell seeding and culture in a manner similar to multilayered PGS scaffolds. Subcutaneous implantation of multilayered PLT32o scaffolds with cultured heart cells provides long-term 3D structural support and retains the exogenous cells, whereas PGS scaffolds lose both their structural integrity and the exogenous cells over 31 d in vivo. PLT32o membrane implants retain their dry mass, whereas PGS implants lose 70 percent of their dry mass by day 31. Macrophages are initially recruited to PLT32o and PGS membrane implants but are no longer present by day 31. Facile synthesis and processing in combination with the capability to support heart cells in vitro and in vivo suggest that PLT32o can offer advantages for tissue engineering applications where prolonged in vivo maintenance of 3D structural integrity and elastomeric mechanical behavior are required.

Heart valve regeneration: the need for systems approaches

Tissue-engineered heart valves are promising alternatives to address the limitations of current valve replacements, particularly for growing children. Current heart valve tissue engineering strategies involve the selection of biomaterial scaffolds, cell types, and often in vitro culture conditions aimed at regenerating a valve for implantation and subsequent maturation in vivo. However, identifying optimal combinations of cell sources, biomaterials, and/or bioreactor conditions to produce functional, durable valve tissue remains a challenge. Despite some short-term success in animal models, attempts to recapitulate aspects of the native heart valve environment based on 'best guesses' of a limited number of regulatory factors have not proven effective. Better outcomes for valve tissue regeneration will likely require a systems-level understanding of the relationships between multiple interacting regulatory factors and their effects on cell function and tissue formation. Until recently, conventional culture methods have not allowed for multiple design parameters to be considered at once. Emerging microtechnologies are well suited to systematically probe multiple inputs, in combination, in high throughput and with great precision. When combined with statistical and network systems analyses, these microtechnologies have excellent potential to define multivariate signal-response relationships and reveal key regulatory pathways for robust functional tissue regeneration.

Biomechanical conditioning of tissue engineered heart valves: Too much of a good thing?

Surgical replacement of dysfunctional valves is the primary option for the treatment of valvular disease and congenital defects. Existing mechanical and bioprosthetic replacement valves are far from ideal, requiring concomitant anticoagulation therapy or having limited durability, thus necessitating further surgical intervention. Heart valve tissue engineering (HVTE) is a promising alternative to existing replacement options, with the potential to synthesize mechanically robust tissue capable of growth, repair, and remodeling. The clinical realization of a bioengineered valve relies on the appropriate combination of cells, biomaterials, and/or bioreactor conditioning. Biomechanical conditioning of valves in vitro promotes differentiation of progenitor cells to tissue-synthesizing myofibroblasts and prepares the construct to withstand the complex hemodynamic environment of the native valve. While this is a crucial step in most HVTE strategies, it also may contribute to fibrosis, the primary limitation of engineered valves, through sustained myofibrogenesis. In this review, we examine the progress of HVTE and the role of mechanical conditioning in the synthesis of mechanically robust tissue, and suggest approaches to achieve myofibroblast quiescence and prevent fibrosis.

Heart valve tissue engineering: how far is the bedside from the bench?

Heart disease, including valve pathologies, is the leading cause of death worldwide. Despite the progress made thanks to improving transplantation techniques, a perfect valve substitute has not yet been developed: once a diseased valve is replaced with current technologies, the newly implanted valve still needs to be changed some time in the future. This situation is particularly dramatic in the case of children and young adults, because of the necessity of valve growth during the patient's life. Our review focuses on the current status of heart valve (HV) therapy and the challenges that must be solved in the development of new approaches based on tissue engineering. Scientists and physicians have proposed tissue-engineered heart valves (TEHVs) as the most promising solution for HV replacement, especially given that they can help to avoid thrombosis, structural deterioration and xenoinfections. Lastly, TEHVs might also serve as a model for studying human valve development and pathologies.

Electrospun fiber constructs for vocal fold tissue engineering: effects of alignment and elastomeric polypeptide coating

Vocal fold lamina propria extracellular matrix (ECM) is highly aligned and when injured, becomes disorganized with loss of the tissue's critical biomechanical properties. This study examines the effects of electrospun fiber scaffold architecture and elastin-like polypeptide (ELP4) coating on human vocal fold fibroblast (HVFF) behavior for applications toward tissue engineering the vocal fold lamina propria. Electrospun Tecoflex™ scaffolds were made with aligned and unaligned fibers, and were characterized using scanning electron microscopy and uniaxial tensile testing. ELP4 was successfully adsorbed onto the scaffolds; HVFFs were seeded and their viability, proliferation, morphology and gene expression were characterized. Aligned and unaligned scaffolds had initial elastic moduli of ∼14 MPa, ∼5 MPa and ∼0.3 MPa, ∼0.6 MPa in the preferred and cross-preferred directions, respectively. Scaffold topography had an effect on the orientation of the cells, with HVFFs seeded on aligned scaffolds having a significantly different (p<0.001) angle of orientation than HVFFs cultured on unaligned scaffolds. This same effect and significant difference (p<0.001) was seen on aligned and unaligned scaffolds coated with ELP4. Scaffold alignment and ELP4 coating impacted ECM gene expression. ELP4 coating, and aligned scaffolds upregulated elastin synthesis when tested on day 7 without a concomitant upregulation of collagen III synthesis. Collectively, results indicate that aligned electrospun scaffolds and ELP4 coating are promising candidates in the development of biodegradeable vocal fold lamina propria constructs.

Fundamentals and application of magnetic particles in cell isolation and enrichment: a review

Magnetic sorting using magnetic beads has become a routine methodology for the separation of key cell populations from biological suspensions. Due to the inherent ability of magnets to provide forces at a distance, magnetic cell manipulation is now a standardized process step in numerous processes in tissue engineering, medicine, and in fundamental biological research. Herein we review the current status of magnetic particles to enable isolation and separation of cells, with a strong focus on the fundamental governing physical phenomena, properties and syntheses of magnetic particles and on current applications of magnet-based cell separation in laboratory and clinical settings. We highlight the contribution of cell separation to biomedical research and medicine and detail modern cell-separation methods (both magnetic and non-magnetic). In addition to a review of the current state-of-the-art in magnet-based cell sorting, we discuss current challenges and available opportunities for further research, development and commercialization of magnetic particle-based cell-separation systems.

How to make a heart valve: from embryonic development to bioengineering of living valve substitutes

Cardiac valve disease is a significant cause of ill health and death worldwide, and valve replacement remains one of the most common cardiac interventions in high-income economies. Despite major advances in surgical treatment, long-term therapy remains inadequate because none of the current valve substitutes have the potential for remodeling, regeneration, and growth of native structures. Valve development is coordinated by a complex interplay of signaling pathways and environmental cues that cause disease when perturbed. Cardiac valves develop from endocardial cushions that become populated by valve precursor mesenchyme formed by an epithelial-mesenchymal transition (EMT). The mesenchymal precursors, subsequently, undergo directed growth, characterized by cellular compartmentalization and layering of a structured extracellular matrix (ECM). Knowledge gained from research into the development of cardiac valves is driving exploration into valve biomechanics and tissue engineering directed at creating novel valve substitutes endowed with native form and function.

Application of Nanoscaffolds in Mesenchymal Stem Cell-Based Therapy

Regenerative medicine is an alternative solution for organ transplantation. Stem cells and nanoscaffolds are two essential components in regenerative medicine. Mesenchymal stem cells (MSCs) are considered as primary adult stem cells with high proliferation capacity, wide differentiation potential, and immunosuppression properties which make them unique for regenerative medicine and cell therapy. Scaffolds are engineered nanofibers that provide suitable microenvironment for cell signalling which has a great influence on cell proliferation, differentiation, and biology. Recently, application of scaffolds and MSCs is being utilized in obtaining more homogenous population of MSCs with higher cell proliferation rate and greater differentiation potential, which are crucial factors in regenerative medicine. In this review, the definition, biology, source, characterization, and isolation of MSCs and current report of application of nanofibers in regenerative medicine in different lesions are discussed.

Scaffolds for tissue engineering of cardiac valves

Tissue engineered heart valves offer a promising alternative for the replacement of diseased heart valves avoiding the limitations faced with currently available bioprosthetic and mechanical heart valves. In the paradigm of tissue engineering, a three-dimensional platform - the so-called scaffold - is essential for cell proliferation, growth and differentiation, as well as the ultimate generation of a functional tissue. A foundation for success in heart valve tissue engineering is a recapitulation of the complex design and diverse mechanical properties of a native valve. This article reviews technological details of the scaffolds that have been applied to date in heart valve tissue engineering research.

Self-reporting scaffolds for 3-dimensional cell culture

Culturing cells in 3D on appropriate scaffolds is thought to better mimic the in vivo microenvironment and increase cell-cell interactions. The resulting 3D cellular construct can often be more relevant to studying the molecular events and cell-cell interactions than similar experiments studied in 2D. To create effective 3D cultures with high cell viability throughout the scaffold the culture conditions such as oxygen and pH need to be carefully controlled as gradients in analyte concentration can exist throughout the 3D construct. Here we describe the methods of preparing biocompatible pH responsive sol-gel nanosensors and their incorporation into poly(lactic-co-glycolic acid) (PLGA) electrospun scaffolds along with their subsequent preparation for the culture of mammalian cells. The pH responsive scaffolds can be used as tools to determine microenvironmental pH within a 3D cellular construct. Furthermore, we detail the delivery of pH responsive nanosensors to the intracellular environment of mammalian cells whose growth was supported by electrospun PLGA scaffolds. The cytoplasmic location of the pH responsive nanosensors can be utilized to monitor intracellular pH (pHi) during ongoing experimentation.

New technologies for surgery of the congenital cardiac defect

The surgical repair of complex congenital heart defects frequently requires additional tissue in various forms, such as patches, conduits, and valves. These devices often require replacement over a patient's lifetime because of degeneration, calcification, or lack of growth. The main new technologies in congenital cardiac surgery aim at, on the one hand, avoiding such reoperations and, on the other hand, improving long-term outcomes of devices used to repair or replace diseased structural malformations. These technologies are: 1) new patches: CorMatrix® patches made of decellularized porcine small intestinal submucosa extracellular matrix; 2) new devices: the Melody® valve (for percutaneous pulmonary valve implantation) and tissue-engineered valved conduits (either decellularized scaffolds or polymeric scaffolds); and 3) new emerging fields, such as antenatal corrective cardiac surgery or robotically assisted congenital cardiac surgical procedures. These new technologies for structural malformation surgery are still in their infancy but certainly present great promise for the future. But the translation of these emerging technologies to routine health care and public health policy will also largely depend on economic considerations, value judgments, and political factors.

Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering

This work presents the latest results on direct laser writing of polymeric materials for tissue engineering applications. A femtosecond Yb:KGW laser (300 fs, 200 kHz, 515 nm) was used as a light source for non-linear lithography. Fabrication was implemented in various photosensitive polymeric materials, such as: hybrid organic-inorganic sol-gel based on silicon-zirconium oxides, commercial ORMOCER® class photoresins. These materials were structured via multi-photon polymerization technique with submicron resolution. Porous three-dimensional scaffolds for artificial tissue engineering were fabricated with constructed system and were up to several millimeters in overall size with 10 to 100 μm internal pores. Biocompatibility of the used materials was tested in primary rabbit muscle-derived stem cell culture in vitro and using laboratory rats in vivo. This interdisciplinary study suggests that proposed technique and materials are suitable for tissue engineering applications.

Laser microfabricated poly(glycerol sebacate) scaffolds for heart valve tissue engineering

Microfabricated poly(glycerol sebacate) (PGS) scaffolds may be applicable to tissue engineering heart valve leaflets by virtue of their controllable microstructure, stiffness, and elasticity. In this study, PGS scaffolds were computationally designed and microfabricated by laser ablation to match the anisotropy and peak tangent moduli of native bovine aortic heart valve leaflets. Finite element simulations predicted PGS curing conditions, scaffold pore shape, and strut width capable of matching the scaffold effective stiffnesses to the leaflet peak tangent moduli. On the basis of simulation predicted effective stiffnesses of 1.041 and 0.208 MPa for the scaffold preferred (PD) and orthogonal, cross-preferred (XD) material directions, scaffolds with diamond-shaped pores were microfabricated by laser ablation of PGS cured 12 h at 160°C. Effective stiffnesses measured for the scaffold PD (0.83 ± 0.13 MPa) and XD (0.21 ± 0.03 MPa) were similar to both predicted values and peak tangent moduli measured for bovine aortic valve leaflets in the circumferential (1.00 ± 0.16 MPa) and radial (0.26 ± 0.03 MPa) directions. Scaffolds cultivated with fibroblasts for 3 weeks accumulated collagen (736 ± 193 μg/g wet weight) and DNA (17 ± 4 μg/g wet weight). This study provides a basis for the computational design of biomimetic microfabricated PGS scaffolds for tissue-engineered heart valves.

A novel culture device for the evaluation of three-dimensional extracellular matrix materials

Cell-matrix interactions in a three-dimensional (3D) extracellular matrix (ECM) are of fundamental importance in living tissue, and their in vitro reconstruction in bioartificial structures represents a core target of contemporary tissue engineering concepts. For a detailed analysis of cell-matrix interaction under highly controlled conditions, we developed a novel ECM evaluation culture device (EECD) that allows for a precisely defined surface-seeding of 3D ECM scaffolds, irrespective of their natural geometry. The effectiveness of EECD was evaluated in the context of heart valve tissue engineering. Detergent decellularized pulmonary cusps were mounted in EECD and seeded with endothelial cells (ECs) to study EC adhesion, morphology and function on a 3D ECM after 3, 24, 48 and 96 h. Standard EC monolayers served as controls. Exclusive top-surface-seeding of 3D ECM by viable ECs was demonstrated by laser scanning microscopy (LSM), resulting in a confluent re-endothelialization of the ECM after 96 h. Cell viability and protein expression, as demonstrated by MTS assay and western blot analysis (endothelial nitric oxide synthase, von Willebrand factor), were preserved at maintained levels over time. In conclusion, EECD proves as a highly effective system for a controlled repopulation and in vitro analysis of cell-ECM interactions in 3D ECM.

Anisotropic collagen fibrillogenesis within microfabricated scaffolds: implications for biomimetic tissue engineering

Anisotropic collagen fibrillogenesis is demonstrated within the pores of an accordion-like honeycomb poly(glycerol sebacate) tissue engineering scaffold. Confocal reflectance microscopy and image analysis demonstrate increased fibril distribution order, fibril density, and alignment in accordion-like honeycomb pores compared with collagen gelled unconstrained. Finite element modeling predicts how collagen gel and scaffold mechanics couple in matching native heart muscle stiffness and anisotropy.

Metal mesh scaffold for tissue engineering of membranes

Engineering of the membrane-like tissue structures to be utilized in highly dynamic loading environments such as the cardiovascular system has been a challenge in the past decade. Scaffolds are critical components of the engineered tissue membranes and allow them being formed in vitro and remain secure in vivo when implanted in the body. Several approaches have been taken to develop scaffolds for tissue membranes. However, all methods entail limitations due to structural vulnerability, short-term functionality, and mechanical properties of the resulted membrane constructs. To overcome these issues, we have developed a novel hybrid scaffold made of an extra thin layer of metal mesh tightly enclosed by biological matrix components. This approach retains all the advantages of using biological scaffolds while developing a strong extracellular matrix that can stand various types of loads after implantation inside the body.

Design and validation of an endothelial progenitor cell capture chip and its application in patients with pulmonary arterial hypertension

The number of circulating endothelial progenitor cells (EPCs) inversely correlates with cardiovascular risk and clinical outcome, and thus has been proposed as a valuable biomarker for risk assessment, disease progression, and response to therapy. However, current strategies for isolation of these rare cells are limited to complex, laborious approaches. The goal of this study was the design and validation of a disposable microfluidic platform capable of selectively capturing and enumerating EPCs directly from human whole blood in healthy and diseased subjects, eliminating sample preprocessing. We then applied the "EPC capture chip" clinically and determined EPC numbers in blood from patients with pulmonary arterial hypertension (PAH). Blood was collected in tubes and injected into polymeric microfluidic chips containing microcolumns pre-coated with anti-CD34 antibody. Captured cells were immunofluorescently stained for the expression of stem and endothelial antigens, identified and counted. The EPC capture chip was validated with conventional flow cytometry counts (r = 0.83). The inter- and intra-day reliability of the microfluidic devices was confirmed at different time points in triplicates over 1-5 months. In a cohort of 43 patients with three forms of PAH (idiopathic/heritable, drug-induced, and connective tissue disease), EPC numbers are ≈50% lower in PAH subjects vs. matched controls and inversely related to two potential disease modifiers: body mass index and postmenopausal status. The EPC capture chip (5 × 30 × 0.05 mm(3)) requires only 200 μL of human blood and has the strong potential to serve as a rapid bedside test for the screening and monitoring of patients with PAH and other proliferative cardiovascular, pulmonary, malignant, and neurodegenerative diseases.

Artificial niche combining elastomeric substrate and platelets guides vascular differentiation of bone marrow mononuclear cells

Bone marrow-derived progenitor cells are promising cell sources for vascular tissue engineering. However, conventional bone marrow mesenchymal stem cell expansion and induction strategies require plating on tissue culture plastic, a stiff substrate that may itself influence cell differentiation. Direct scaffold seeding avoids plating on plastic; to the best of our knowledge, there is no report of any scaffold that induces the differentiation of bone marrow mononuclear cells (BMNCs) to vascular cells in vitro. In this study, we hypothesize that an elastomeric scaffold with adsorbed plasma proteins and platelets will induce differentiation of BMNCs to vascular cells and promote vascular tissue formation by combining soft tissue mechanical properties with platelet-mediated tissue repairing signals. To test our hypothesis, we directly seeded rat primary BMNCs in four types of scaffolds: poly(lactide-co-glycolide), elastomeric poly(glycerol sebacate) (PGS), platelet-poor plasma-coated PGS, and PGS coated by plasma supplemented with platelets. After 21 days of culture, osteochondral differentiation of cells in poly(lactide-co-glycolide) was detected, but most of the adhered cells on the surface of all PGS scaffolds expressed calponin-I and α-smooth muscle actin, suggesting smooth muscle differentiation. Cells in PGS scaffolds also produced significant amount of collagen and elastin. Further, plasma coating improves seeding efficiency, and platelet increases proliferation, the number of differentiated cells, and extracellular matrix content. Thus, the artificial niche composed of platelets, plasma, and PGS is promising for artery tissue engineering using BMNCs.

Substrates for cardiovascular tissue engineering

Cardiovascular tissue engineering aims to find solutions for the suboptimal regeneration of heart valves, arteries and myocardium by creating 'living' tissue replacements outside (in vitro) or inside (in situ) the human body. A combination of cells, biomaterials and environmental cues of tissue development is employed to obtain tissues with targeted structure and functional properties that can survive and develop within the harsh hemodynamic environment of the cardiovascular system. This paper reviews the up-to-date status of cardiovascular tissue engineering with special emphasis on the development and use of biomaterial substrates. Key requirements and properties of these substrates, as well as methods and readout parameters to test their efficacy in the human body, are described in detail and discussed in the light of current trends toward designing biologically inspired microenviroments for in situ tissue engineering purposes.

Tissue engineering on matrix: future of autologous tissue replacement

Tissue engineering aims at the creation of living neo-tissues identical or close to their native human counterparts. As basis of this approach, temporary biodegradable supporter matrices are fabricated in the shape of a desired construct, which promote tissue strength and provide functionality until sufficient neo-tissue is formed. Besides fully synthetic polymer-based scaffolds, decellularized biological tissue of xenogenic or homogenic origin can be used. In a second step, these scaffolds are seeded with autologous cells attaching to the scaffold microstructure. In order to promote neo-tissue formation and maturation, the seeded scaffolds are exposed to different forms of stimulation. In cardiovascular tissue engineering, this "conditioning" can be achieved via culture media and biomimetic in vitro exposure, e.g., using flow bioreactors. This aims at adequate cellular differentiation, proliferation, and extracellular matrix production to form a living tissue called the construct. These living autologous constructs, such as heart valves or vascular grafts, are created in vitro, comprising a viable interstitium with repair and remodeling capabilities already prior to implantation. In situ further in vivo remodeling is intended to recapitulate physiological vascular architecture and function. The remodeling mechanisms were shown to be dominated by monocytic infiltration and chemotactic host-cell attraction leading into a multifaceted inflammatory process and neo-tissue formation. Key molecules of these processes can be integrated into the scaffold matrix to direct cell and tissue fate in vivo.

Current developments in the tissue engineering of autologous heart valves: moving towards clinical use

The use of tissue-engineering methods to create autologous heart valve constructs has the potential to overcome the fundamental drawbacks of more traditional valve prostheses. Traditional mechanical valves, while durable, increase the risk for endocarditis and thrombogenesis, and require the recipient to continue lifelong anticoagulant therapy. Homograft or xenograft heart valve prostheses are associated with immune reaction and progressive deterioration with limited durability. Most importantly, neither option is capable of growth and remodeling in vivo and both options place the patient at risk for valve-related complications and reoperation. These shortcomings have prompted the application of tissue-engineering techniques to create fully autologous heart valve replacements. Future clinically efficacious tissue-engineered autologous valves should be nonthrombogenic, biocompatible, capable of growth and remodeling in vivo, implantable with current surgical techniques, hemodynamically perfect, durable for the patient’s life and most importantly, significantly improve quality of life for the patient. In order to meet these expectations, the nature of the ideal biochemical milieu for conditioning an autologous heart valve will need to be elucidated. In addition, standardized criteria by which to quantitatively evaluate a tissue-engineered heart valve, as well as noninvasive analytical techniques for use in long-term animal models, will be required. This article highlights the advances, challenges and future clinical prospects in the field of tissue engineering of autologous heart valves, focusing on progress made by studies that have investigated a fully autologous, tissue-engineered pulmonary valve replacement in vivo.

The response of annulus fibrosus cell to fibronectin-coated nanofibrous polyurethane-anionic dihydroxyoligomer scaffolds

Tissue engineering of the annulus fibrosus(AF), a component of the intervertebral disc, has proven to be challenging due to its complex oriented lamellar structure. Previously it was demonstrated that polyurethane (PU) scaffolds containing an anionic dihydroxy oligomers (ADO) may be suitable to use in this application. The current study examines whether matrix protein(s) coatings (collagen type I, collagen type I and fibronectin, fibronectin, or vitronectin) would promote cell and collagen orientation that more closely mimics native AF. The greatest cell attachment occurred when scaffolds were pre-coated with Fn. Cells on Fn-coated scaffolds were aligned parallel to scaffold fibers, a process that involved α5β1 integrin, as determined by integrin-specific blocking antibodies, which in turn reduced AF cell spreading and alignment. Cell shape was regulated by the actin cytoskeleton as cells grown in the presence of cytochalasin D did not spread. Cells on Fn-coated PU scaffolds formed fibrillar Fn, synthesized significantly more collagen, and showed linear alignment of the secreted type I collagen when compared to cells grown on the other protein-coated scaffolds and the non-coated control. Thus Fn-coating of PU-ADO scaffolds appears to promote properly oriented AF cells and collagen, which should facilitate developing AF tissue that more closely mimics the native tissue.

Functional stability of endothelial cells on a novel hybrid scaffold for vascular tissue engineering

Porous and pliable conduits made of biodegradable polymeric scaffolds offer great potential for the development of blood vessel substitutes but they generally lack signals for cell proliferation, survival and maintenance of a normal phenotype. In this study we have prepared and evaluated porous poly(ε-caprolactone) (PCL) integrated with fibrin composite (FC) to get a biomimetic hybrid scaffold (FC PCL) with the biological properties of fibrin, fibronectin (FN), gelatin, growth factors and glycosaminoglycans. Reduced platelet adhesion on a human umbilical vein endothelial cell-seeded hybrid scaffold as compared to bare PCL or FC PCL was observed, which suggests the non-thrombogenic nature of the tissue-engineered scaffold. Analysis of real-time polymerase chain reaction (RT-PCR) after 5 days of endothelial cell (EC) culture on a hybrid scaffold indicated that the prothrombotic von Willebrand factor and plasminogen activator inhibitor (PAI) were quiescent and stable. Meanwhile, dynamic expressions of tissue plasminogen activator (tPA) and endothelial nitric oxide synthase indicated the desired cell phenotype on the scaffold. On the hybrid scaffold, shear stress could induce enhanced nitric oxide release, which implicates vaso-responsiveness of EC grown on the tissue-engineered construct. Significant upregulation of mRNA for extracellular matrix (ECM) proteins, collagen IV and elastin, in EC was detected by RT-PCR after growing them on the hybrid scaffold and FC-coated tissue culture polystyrene (FC TCPS) but not on FN-coated TCPS. The results indicate that the FC PCL hybrid scaffold can accomplish a remodeled ECM and non-thrombogenic EC phenotype, and can be further investigated as a scaffold for cardiovascular tissue engineering.

Tailoring the mechanical properties of 3D-designed poly(glycerol sebacate) scaffolds for cartilage applications

Matching tissue engineering scaffold modulus to that of native tissue is highly desirable. Effective scaffold modulus can be altered through changes in base material modulus and/or scaffold pore architecture. Because the latter may be restricted by tissue in-growth requirements, it is advantageous to be able to alter the base material modulus of a chosen scaffold material. Here, we show that the bulk modulus of poly(glycerol sebacate) (PGS) can be changed by varying molar ratios during prepolymer synthesis and by varying curing time. We go on to show that PGS can be used to create 3D designed scaffolds via solid freeform fabrication methods with modulus values that fall within the ranges of native articular cartilage equilibrium modulus. Furthermore, using base material modulus inputs, homogenization finite element analysis can effectively predict the tangent modulus of PGS scaffold designs, which provides a significant advantage for designing new cartilage regeneration scaffolds. Lastly, we demonstrate that this relatively new biomedical material supports cartilaginous matrix production by chondrocytes in vitro. (c) 2010 Wiley Periodicals, Inc. J Biomed Mater Res, 2010.

Elastin-based materials

Elastin is a versatile elastic protein that dominates flexible tissues capable of recoil, and facilitates commensurate cell interactions in these tissues in all higher vertebrates. Elastin's persistence and insolubility hampered early efforts to construct versatile biomaterials. Subsequently the field has progressed substantially through the adapted use of solubilized elastin, elastin-based peptides and the increasing availability of recombinant forms of the natural soluble elastin precursor, tropoelastin. These interactions allow for the formation of a sophisticated range of biomaterial constructs and composites that benefit from elastin's physical properties of innate assembly and elasticity, and cell interactive properties as discussed in this tutorial review.

A functionalizable polyester with free hydroxyl groups and tunable physiochemical and biological properties

Polyesters with free functional groups allow facile modifications with biomolecules, which can lead to versatile biomaterials that afford controlled interactions with cells and tissues. Efficient synthesis of functionalizable polyesters (Functionalizable polymer is defined as a polymer with functional groups that readily react with biomolecules and functionalized biomaterial as one already modified with biomolecules.) is still a challenge that greatly limits the availability and widespread applications of biofunctionalized synthetic polymers. Here we report a simple route to prepare a functionalizable polyester, poly(sebacoyl diglyceride) (PSeD) bearing free hydroxyl groups. The key synthetic step is an epoxide ring-opening polymerization, instead of the traditional polycondensation that produces poly(glycerol sebacate) (PGS) (Wang YD, Ameer GA, Sheppard BJ, Langer R. A tough biodegradable elastomer. Nat Biotechnol 2002;20(6):602-6). PSeD has a more defined structure with mostly linear backbone, more free hydroxyl groups, higher molecular weight, and lower polydispersity than PGS. Crosslinking PSeD with sebacic acid yields a polymer five times tougher and more elastic than cured PGS. PSeD exhibits good cytocompatibility in vitro. Furthermore, functionalization by glycine proceeds with high efficiency. This versatile synthetic platform can offer a large family of biodegradable, functionalized polymers with tunable physiochemical and biological properties useful for a wide range of biomedical applications.

Endothelial progenitor cells as a sole source for ex vivo seeding of tissue-engineered heart valves

PURPOSES

We investigated whether circulating endothelial progenitor cells (EPCs) can be used as a cell source for the creation of a tissue-engineered heart valve (TEHV).

METHODS

Trileaflet valved conduits were fabricated using nonwoven polyglycolic acid/poly-4-hydroxybutyrate polymer. Ovine peripheral blood EPCs were dynamically seeded onto a valved conduit and incubated for 7, 14, and 21 days.

RESULTS

Before seeding, EPCs were shown to express CD31(+), eNOS(+), and VE-Cadherin(+) but not alpha-smooth muscle actin. Histological analysis demonstrated relatively homogenous cellular ingrowth throughout the valved conduit. TEHV constructs revealed the presence of endothelial cell (EC) markers and alpha-smooth muscle actin(+) cells comparable with native valves. Protein levels were comparable with native valves and exceeded those in unseeded controls. EPC-TEHV demonstrated a temporal pattern of matrix metalloproteinases-2/9 expression and tissue inhibitors of metalloproteinase activities comparable to that of native valves. Mechanical properties of EPC-TEHV demonstrated significantly greater stiffness than that of the unseeded scaffolds and native valves.

CONCLUSIONS

Circulating EPC appears to have the potential to provide both interstitial and endothelial functions and could potentially serve as a single-cell source for construction of autologous heart valves.

Novel polymeric scaffolds using protein microbubbles as porogen and growth factor carriers

Polymeric tissue engineering scaffolds prepared by conventional techniques like salt leaching and phase separation are greatly limited by their poor biomolecule-delivery abilities. Conventional methods of incorporation of various growth factors, proteins, and/or peptides on or in scaffold materials via different crosslinking and conjugation techniques are often tedious and may affect scaffold's physical, chemical, and mechanical properties. To overcome such deficiencies, a novel two-step porous scaffold fabrication procedure has been created in which bovine serum albumin microbubbles (henceforth MB) were used as porogen and growth factor carriers. Polymer solution mixed with MB was phase separated and then lyophilized to create porous scaffold. MB scaffold triggered substantially lesser inflammatory responses than salt-leached and conventional phase-separated scaffolds in vivo. Most importantly, the same technique was used to produce insulin-like growth factor-1 (IGF-1)-eluting porous scaffolds, simply by incorporating IGF-1-loaded MB (MB-IGF-1) with polymer solution before phase separation. In vitro such MB-IGF-1 scaffolds were able to promote cell growth to a much greater extent than scaffold soaked in IGF-1, confirming the bioactivity of the released IGF-1. Further, such MB-IGF-1 scaffolds elicited IGF-1-specific collagen production in the surrounding tissue in vivo. This novel growth factor-eluting scaffold fabrication procedure can be used to deliver a range of single or combination of bioactive biomolecules to substantially promote cell growth and function in degradable scaffold.

The role of organ level conditioning on the promotion of engineered heart valve tissue development in-vitro using mesenchymal stem cells

We have previously shown that combined flexure and flow (CFF) augment engineered heart valve tissue formation using bone marrow-derived mesenchymal stem cells (MSC) seeded on polyglycolic acid (PGA)/poly-L-lactic acid (PLLA) blend nonwoven fibrous scaffolds (Engelmayr, et al., Biomaterials 2006; vol. 27 pp. 6083-95). In the present study, we sought to determine if these phenomena were reproducible at the organ level in a functional tri-leaflet valve. Tissue engineered valve constructs (TEVC) were fabricated using PGA/PLLA nonwoven fibrous scaffolds then seeded with MSCs. Tissue formation rates using both standard and augmented (using basic fibroblast growth factor [bFGF] and ascorbic acid-2-phosphate [AA2P]) media to enhance the overall production of collagen were evaluated, along with their relation to the local fluid flow fields. The resulting TEVCs were statically cultured for 3 weeks, followed by a 3 week dynamic culture period using our organ level bioreactor (Hildebrand et al., ABME, Vol. 32, pp. 1039-49, 2004) under approximated pulmonary artery conditions. Results indicated that supplemented media accelerated collagen formation (approximately 185% increase in collagen mass/MSC compared to standard media), as well as increasing collagen mass production from 3.90 to 4.43 pg/cell/week from 3 to 6 weeks. Using augmented media, dynamic conditioning increased collagen mass production rate from 7.23 to 13.65 pg/cell/week (88.8%) during the dynamic culture period, along with greater preservation of net DNA. Moreover, when compared to our previous CFF study, organ level conditioning increased the collagen production rate from 4.76 to 6.42 pg/cell/week (35%). Newly conducted CFD studies of the CFF specimen flow patterns suggested that oscillatory surface shear stresses were surprisingly similar to a tri-leaflet valve. Overall, we found that the use of simulated pulmonary artery conditions resulted in substantially larger collagen mass production levels and rates found in our earlier CFF study. Moreover, given the fact that the scaffolds underwent modest strains (approximately 7% max) during either CFF or physiological conditioning, the oscillatory surface shear stresses estimated in both studies may play a substantial role in eliciting MSC collagen production in the highly dynamic engineered heart valve fluid mechanical environment.

Evidence of dysfunction of endothelial progenitors in pulmonary arterial hypertension

RATIONALE

Severe pulmonary arterial hypertension (PAH) is characterized by the formation of plexiform lesions and concentric intimal fibrosis in small pulmonary arteries. The origin of cells contributing to these vascular lesions is uncertain. Endogenous endothelial progenitor cells are potential contributors to this process.

OBJECTIVES

To determine whether progenitors are involved in the pathobiology of PAH.

METHODS

We performed immunohistochemistry to determine the expression of progenitor cell markers (CD133 and c-Kit) and the major homing signal pathway stromal cell-derived factor-1 and its chemokine receptor (CXCR4) in lung tissue from patients with idiopathic PAH, familial PAH, and PAH associated with congenital heart disease. Two separate flow cytometric methods were employed to determine peripheral blood circulating numbers of angiogenic progenitors. Late-outgrowth progenitor cells were expanded ex vivo from the peripheral blood of patients with mutations in the gene encoding bone morphogenetic protein receptor type II (BMPRII), and functional assays of migration, proliferation, and angiogenesis were undertaken. measurements and main results: There was a striking up-regulation of progenitor cell markers in remodeled arteries from all patients with PAH, specifically in plexiform lesions. These lesions also displayed increased stromal cell-derived factor-1 expression. Circulating angiogenic progenitor numbers in patients with PAH were increased compared with control subjects and functional studies of late-outgrowth progenitor cells from patients with PAH with BMPRII mutations revealed a hyperproliferative phenotype with impaired ability to form vascular networks.

CONCLUSIONS

These findings provide evidence of the involvement of progenitor cells in the vascular remodeling associated with PAH. Dysfunction of circulating progenitors in PAH may contribute to this process.

Bioengineering challenges for heart valve tissue engineering

Surgical replacement of diseased heart valves by mechanical and tissue valve substitutes is now commonplace and enhances survival and quality of life for many patients. However, repairs of congenital deformities require very small valve sizes not commercially available. Further, a fundamental problem inherent to the use of existing mechanical and biological prostheses in the pediatric population is their failure to grow, repair, and remodel. It is believed that a tissue engineered heart valve can accommodate many of these requirements, especially those pertaining to somatic growth. This review provides an overview of the field of heart valve tissue engineering, including recent trends, with a focus on the bioengineering challenges unique to heart valves. We believe that, currently, the key bioengineering challenge is to determine how biological, structural, and mechanical factors affect extracellular matrix (ECM) formation and in vivo functionality. These factors are fundamental to any approach toward developing a clinically viable tissue engineered heart valve (TEHV), regardless of the particular approach. Critical to the current approaches to TEHVs is scaffold design, which must simultaneously provide function (valves must function from the time of implant) as well as stress transfer to the new ECM. From a bioengineering point of view, a hierarchy of approaches will be necessary to connect the organ-tissue relationships with underpinning cell and sub-cellular events. Overall, such approaches need to be structured to address these fundamental issues to lay the basis for TEHVs that can be developed and designed according to truly sound scientific and engineering principles.

Development of microfluidics as endothelial progenitor cell capture technology for cardiovascular tissue engineering and diagnostic medicine

We have developed a unique microfluidic platform capable of capturing circulating endothelial progenitor cells (EPCs) by understanding surface chemistries and adhesion profiles. The surface of a variable-shear-stress microfluidic device was conjugated with 6 different antibodies [anti-CD34, -CD31, -vascular endothelial growth factor receptor-2 (VEGFR-2), -CD146, -CD45, and -von Willebrand factor (vWF)] designed to match the surface antigens on ovine peripheral blood-derived EPCs. Microfluidic analysis showed a shear-stress-dependent decrease in EPC adhesion on attached surface antigens. EPCs exhibited increased adhesion to antibodies against CD34, VEGFR-2, CD31, and CD146 compared to CD45, consistent with their endothelial cell-specific surface profile, when exposed to a minimum shear stress of 1.47 dyn/cm(2). Bone-marrow-derived mesenchymal stem cells and artery-derived endothelial and smooth muscle cells were used to demonstrate the specificity of the EPC microfluidic device. Coated hematopoietic specific-surface (CD45) and granular vWF antibodies, as well as uncoated bare glass and substrate (1% BSA), were utilized as controls. Microfluidic devices have been developed as an EPC capture platform using immobilized antibodies targeted as EPC surface antigens. This EPC chip may provide a new and effective tool for addressing challenges in cardiovascular disease and tissue engineering.

The influence of heart valve leaflet matrix characteristics on the interaction between human mesenchymal stem cells and decellularized scaffolds

The potential for in vitro colonization of decellularized valves by human bone marrow mesenchymal stem cells (hBM-MSCs) towards the anisotropic layers ventricularis and fibrosa and in homo- vs. heterotypic cell-ECM interactions has never been investigated. hBM-MSCs were expanded and characterized by immunofluorescence and FACS analysis. Porcine and human pulmonary valve leaflets (p- and hPVLs, respectively) underwent decellularization with Triton X100-sodium cholate treatment (TRICOL), followed by nuclear fragment removal. hBM-MSCs (2x10(6) cells/cm(2)) were seeded onto fibrosa (FS) or ventricularis (VS) of decellularized PVLs, precoated with FBS and fibronectin, and statically cultured for 30 days. Bioengineered PVLs revealed no histopathological features but a reconstructed endothelium lining and the presence of fibroblasts, myofibroblasts and SMCs, as in the corresponding native leaflet. The two valve layers behaved differently as regards hBM-MSC repopulation potential, however, with a higher degree of 3D spreading and differentiation in VS than in FS samples, and with enhanced cell survival and colonization effects in the homotypic ventricularis matrix, suggesting that hBM-MSC phenotypic conversion is strongly influenced in vitro by the anisotropic valve microstructure and species-specific matching between extracellular matrix and donor cells. These findings are of particular relevance to in vivo future applications of valve tissue engineering.

A biocompatible endothelial cell delivery system for in vitro tissue engineering

Engineering solid tissues, including cardiac muscle, requires the inclusion of a microvasculature. Prevascularization in vitro will likely be dependent upon coculturing parenchymal cells with vascular cells, on a matrix that is sufficiently porous to allow microvessel formation. In this study, we examined the behavior and function of endothelial cells on a highly porous elastomeric 3D poly(glycerol sebacate) (PGS) scaffold, to provide a flexible and biocompatible endothelial cell delivery system for developing cardiac engineered tissues with neovascularization potential. Both static and perfusion cell seeding methods were used, and the effects of surface treatment of the scaffold with various extracellular matrix components were examined. Endothelial cell adhesion and phenotype on the PGS scaffold under various flow conditions were also determined. Surface coating with laminin markedly improved the endothelial cell adhesion, survival, and proliferation. The anticoagulant phenotype of adhered endothelial cells was further regulated by the application of flow through regulation of nitric oxide expression. By providing a highly porous scaffolding that contains endothelium with anticoagulant properties, the endothelial cell-seeded PGS scaffold could provide a new basis for subsequent coculture studies with various cell types to develop complex engineered tissue constructs with vascularization capacity.

Material-based deployment enhances efficacy of endothelial progenitor cells

Cell-based therapies are attractive for revascularizing and regenerating tissues and organs, but clinical trials of endothelial progenitor cell transplantation have not resulted in consistent benefit. We propose a different approach in which a material delivery system is used to create a depot of vascular progenitor cells in vivo that exit over time to repopulate the damaged tissue and participate in regeneration of a vascular network. Microenvironmental conditions sufficient to maintain the viability and outward migration of outgrowth endothelial cells (OECs) have been delineated, and a material incorporating these signals improved engraftment of transplanted cells in ischemic murine hindlimb musculature, and increased blood vessel densities from 260 to 670 vessels per mm(2), compared with direct cell injection. Further, material deployment dramatically improved the efficacy of these cells in salvaging ischemic murine limbs, whereas bolus OEC delivery was ineffective in preventing toe necrosis and foot loss. Finally, material deployment of a combination of OECs with another cell population commonly isolated from peripheral or cord blood, endothelial progenitor cells (EPCs) returned perfusion to normal levels in 40 days, and prevented toe and foot necrosis. Direct injection of an EPC/OEC combination was minimally effective in improving limb perfusion, and untreated limbs underwent autoamputation in 3 days. These results demonstrate that vascular progenitor cell utility is highly dependent on the mode of delivery, and suggest that one can create new vascular beds for a variety of applications with this material-controlled deployment of cells.

Cyclic stretch affects pulmonary endothelial cell control of pulmonary smooth muscle cell growth

Endothelial cells are subjected to mechanical forces in the form of cyclic stretch resulting from blood pulsatility. Pulmonary artery endothelial cells (PAECs) produce factors that stimulate and inhibit pulmonary artery smooth muscle cell (PASMC) growth. We hypothesized that PAECs exposed to cyclic stretch secrete proteins that inhibit PASMC growth. Media from PAECs exposed to cyclic stretch significantly inhibited PASMC growth in a time-dependent manner. Lyophilized material isolated from stretched PAEC-conditioned media significantly inhibited PASMC growth in a dose-dependent manner. This inhibition was reversed by trypsin inactivation, which is consistent with the relevant factor being a protein(s). To identify proteins that inhibited cell growth in conditioned media from stretched PAECs, we used proteomic techniques and found that thrombospondin (TSP)-1, a natural antiangiogenic factor, was up-regulated by stretch. In vitro, exogenous TSP-1 inhibited PASMC growth. TSP-1-blocking antibodies reversed conditioned media-induced inhibition of PASMC growth. Cyclic stretched PAECs secrete protein(s) that inhibit PASMC proliferation. TSP-1 may be, at least in part, responsible for this inhibition. The complete identification and understanding of the secreted proteome of stretched PAECs may lead to new insights into the pathophysiology of pulmonary vascular remodeling.