1
|
Abstract
Light is a uniquely powerful tool for controlling molecular events in biology. No other external input (e.g., heat, ultrasound, magnetic field) can be so tightly focused or so highly regulated as a clinical laser. Drug delivery vehicles that can be photonically activated have been developed across many platforms, from the simplest "caging" of therapeutics in a prodrug form, to more complex micelles and circulating liposomes that improve drug uptake and efficacy, to large-scale hydrogel platforms that can be used to protect and deliver macromolecular agents including full-length proteins. In this Review, we discuss recent innovations in photosensitive drug delivery and highlight future opportunities to engineer and exploit such light-responsive technologies in the clinical setting.
Collapse
Affiliation(s)
- Teresa L Rapp
- Department of Chemical Engineering, University of Washington, Seattle, WA 98105, USA
| | - Cole A DeForest
- Department of Chemical Engineering, University of Washington, Seattle, WA 98105, USA; Department of Bioengineering, University of Washington, Seattle, WA 98105, USA; Department of Chemistry, University of Washington, Seattle, WA 98105, USA; Institute of Stem Cell & Regenerative Medicine, University of Washington, Seattle, WA 98109, USA; Molecular Engineering & Sciences Institute, University of Washington, Seattle, WA 98105, USA.
| |
Collapse
|
2
|
Turkoglu Sasmazel H, Alazzawi M, Kadim Abid Alsahib N. Atmospheric Pressure Plasma Surface Treatment of Polymers and Influence on Cell Cultivation. Molecules 2021; 26:molecules26061665. [PMID: 33802663 PMCID: PMC8002466 DOI: 10.3390/molecules26061665] [Citation(s) in RCA: 15] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/26/2021] [Revised: 03/04/2021] [Accepted: 03/06/2021] [Indexed: 12/31/2022] Open
Abstract
Atmospheric plasma treatment is an effective and economical surface treatment technique. The main advantage of this technique is that the bulk properties of the material remain unchanged while the surface properties and biocompatibility are enhanced. Polymers are used in many biomedical applications; such as implants, because of their variable bulk properties. On the other hand, their surface properties are inadequate which demands certain surface treatments including atmospheric pressure plasma treatment. In biomedical applications, surface treatment is important to promote good cell adhesion, proliferation, and growth. This article aim is to give an overview of different atmospheric pressure plasma treatments of polymer surface, and their influence on cell-material interaction with different cell lines.
Collapse
Affiliation(s)
- Hilal Turkoglu Sasmazel
- Department of Metallurgical and Materials Engineering, Atilim University, Incek, Golbasi, 06830 Ankara, Turkey
- Correspondence: ; Tel.: +90-(312)-586-8844
| | - Marwa Alazzawi
- Department of Biomedical Engineering, Al Nahrain University, Al Jadriya Bridge, Baghdad 64074, Iraq; (M.A.); (N.K.A.A.)
| | - Nabeel Kadim Abid Alsahib
- Department of Biomedical Engineering, Al Nahrain University, Al Jadriya Bridge, Baghdad 64074, Iraq; (M.A.); (N.K.A.A.)
| |
Collapse
|
3
|
Ronca A, Ronca S, Forte G, Ambrosio L. Synthesis of an UV-Curable Divinyl-Fumarate Poly-ε-Caprolactone for Stereolithography Applications. Methods Mol Biol 2021; 2147:55-62. [PMID: 32840810 DOI: 10.1007/978-1-0716-0611-7_5] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The limited number of commercially available photocrosslinkable resins for stereolithography has often been considered the main limitation of this technique. In this manuscript, a photocrosslinkable poly-ε-caprolactone (PCL) has been synthesized by a two-step method starting from ring opening polymerization (ROP) of ε-caprolactone. Hydroxyethyl vinyl ether (HEVE) has been used both as the initiator of ROP and as photo-curable functional group to obtain a vinyl poly-ε-caprolactone (VPCL). The following reaction of VPCL with fumaryl chloride (FuCl) results in a divinyl-fumarate polycaprolactone (VPCLF). Moreover, a catalyst based on Al, instead of the most popular Tin(II) 2-ethylhexanoate, has been employed to reduce the cytotoxicity of the material. VPCLF has been successfully used, in combination with N-vinyl-pyrrolidone (NVP), to fabricate 3D porous scaffolds by micro-stereolithography (μ-SL) with mathematically defined architectures.
Collapse
Affiliation(s)
- Alfredo Ronca
- Institute of Polymers, Composites and Biomaterials - National Research Council (IPCB-CNR), Naples, Italy.
| | - Sara Ronca
- Department of Materials, Holywell Park, Loughborough University, Leicestershire, UK
| | - Giuseppe Forte
- Department of Materials, Holywell Park, Loughborough University, Leicestershire, UK
| | - Luigi Ambrosio
- Institute of Polymers, Composites and Biomaterials - National Research Council (IPCB-CNR), Naples, Italy
| |
Collapse
|
4
|
Sánchez-Torres S, Díaz-Ruíz A, Ríos C, Olayo MG, Cruz GJ, Olayo R, Morales J, Mondragón-Lozano R, Fabela-Sánchez O, Orozco-Barrios C, Coyoy-Salgado A, Orozco-Suárez S, González-Ruiz C, Álvarez-Mejía L, Morales-Guadarrama A, Buzoianu-Anguiano V, Damián-Matsumura P, Salgado-Ceballos H. Recovery of motor function after traumatic spinal cord injury by using plasma-synthesized polypyrrole/iodine application in combination with a mixed rehabilitation scheme. J Mater Sci Mater Med 2020; 31:58. [PMID: 32607849 DOI: 10.1007/s10856-020-06395-5] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2019] [Accepted: 06/15/2020] [Indexed: 06/11/2023]
Abstract
Traumatic spinal cord injury (TSCI) can cause paralysis and permanent disability. Rehabilitation (RB) is currently the only accepted treatment, although its beneficial effect is limited. The development of biomaterials has provided therapeutic possibilities for TSCI, where our research group previously showed that the plasma-synthesized polypyrrole/iodine (PPy/I), a biopolymer with different physicochemical characteristics than those of the PPy synthesized by conventional methods, promotes recovery of motor function after TSCI. The present study evaluated if the plasma-synthesized PPy/I applied in combination with RB could increase its beneficial effects and the mechanisms involved. Adult rats with TSCI were divided into no treatment (control); biopolymer (PPy/I); mixed RB by swimming and enriched environment (SW/EE); and combined treatment (PPy/I + SW/EE) groups. Eight weeks after TSCI, the general health of the animals that received any of the treatments was better than the control animals. Functional recovery evaluated by two scales was better and was achieved in less time with the PPy/I + SW/EE combination. All treatments significantly increased βIII-tubulin (nerve plasticity) expression, but only PPy/I increased GAP-43 (nerve regeneration) and MBP (myelination) expression when were analyzed by immunohistochemistry. The expression of GFAP (glial scar) decreased in treated groups when determined by histochemistry, while morphometric analysis showed that tissue was better preserved when PPy/I and PPy/I + SW/EE were administered. The application of PPy/I + SW/EE, promotes the preservation of nervous tissue, and the expression of molecules related to plasticity as βIII-tubulin, reduces the glial scar, improves general health and allows the recovery of motor function after TSCI. The implant of the biomaterial polypyrrole/iodine (PPy/I) synthesized by plasma (an unconventional synthesis method), in combination with a mixed rehabilitation scheme with swimming and enriched environment applied after a traumatic spinal cord injury, promotes expression of GAP-43 and βIII-tubulin (molecules related to plasticity and nerve regeneration) and reduces the expression of GFAP (molecule related to the formation of the glial scar). Both effects together allow the formation of nerve fibers, the reconnection of the spinal cord in the area of injury and the recovery of lost motor function. The figure shows the colocalization (yellow) of βIII-tubilin (red) and GAP-43 (green) in fibers crossing the epicenter of the injury (arrowheads) that reconnect the rostral and caudal ends of the injured spinal cord and allowed recovery of motor function.
Collapse
Affiliation(s)
- Stephanie Sánchez-Torres
- Instituto Mexicano del Seguro Social, Unidad de Investigación Médica en Enfermedades Neurológicas, Hospital de Especialidades, Centro Médico Nacional Siglo XXI. Av. Cuauhtémoc 330, Col. Doctores, México City, CP, 06720, México
- Doctorate in Biological and Health Sciences, Universidad Autónoma Metropolitana, Iztapalapa, Mexico City, CP, 09340, Mexico
- Proyecto Camina A.C. Research Center, Mexico City, CP, 14050, Mexico
| | - Araceli Díaz-Ruíz
- Departamento de Neuroquímica, Instituto Nacional de Neurología y Neurocirugía, Manuel Velasco Suárez S.S.A, Mexico city, CP, 14269, Mexico
| | - Camilo Ríos
- Departamento de Neuroquímica, Instituto Nacional de Neurología y Neurocirugía, Manuel Velasco Suárez S.S.A, Mexico city, CP, 14269, Mexico
| | - María G Olayo
- Departamento de Física, Instituto Nacional de Investigaciones Nucleares. Carretera Mexico-Toluca, km 36.5, Ocoyoacac, State of Mexico, CP, 52750, Mexico
| | - Guillermo J Cruz
- Departamento de Física, Instituto Nacional de Investigaciones Nucleares. Carretera Mexico-Toluca, km 36.5, Ocoyoacac, State of Mexico, CP, 52750, Mexico
| | - Roberto Olayo
- Departamento de Física, Universidad Autónoma Metropolitana, Mexico City, CP, 09340, Mexico
| | - Juan Morales
- Departamento de Física, Universidad Autónoma Metropolitana, Mexico City, CP, 09340, Mexico
| | - Rodrigo Mondragón-Lozano
- Proyecto Camina A.C. Research Center, Mexico City, CP, 14050, Mexico
- CONACyT-Instituto Mexicano del Seguro Social, Unidad de Investigación Médica en enfermedades Neurológicas, Hospital de Especialidades, Centro Médico Nacional Siglo XXI, Mexico City, Mexico
| | - Omar Fabela-Sánchez
- Proyecto Camina A.C. Research Center, Mexico City, CP, 14050, Mexico
- Departamento de Ingeniería Eléctrica, Universidad Autónoma Metropolitana, San Rafael Atlixco 186, 09340, Iztapalapa, CDMX, México
- Catedrático CONACyT-Centro de Investigación en Química Aplicada, Enrique Reyna H. No. 140, San José de los Cerritos, Saltillo, Coahuila, 25294, México
| | - Carlos Orozco-Barrios
- Proyecto Camina A.C. Research Center, Mexico City, CP, 14050, Mexico
- CONACyT-Instituto Mexicano del Seguro Social, Unidad de Investigación Médica en enfermedades Neurológicas, Hospital de Especialidades, Centro Médico Nacional Siglo XXI, Mexico City, Mexico
| | - Angélica Coyoy-Salgado
- Proyecto Camina A.C. Research Center, Mexico City, CP, 14050, Mexico
- CONACyT-Instituto Mexicano del Seguro Social, Unidad de Investigación Médica en enfermedades Neurológicas, Hospital de Especialidades, Centro Médico Nacional Siglo XXI, Mexico City, Mexico
| | - Sandra Orozco-Suárez
- Instituto Mexicano del Seguro Social, Unidad de Investigación Médica en Enfermedades Neurológicas, Hospital de Especialidades, Centro Médico Nacional Siglo XXI. Av. Cuauhtémoc 330, Col. Doctores, México City, CP, 06720, México
| | - Cristian González-Ruiz
- Proyecto Camina A.C. Research Center, Mexico City, CP, 14050, Mexico
- Escuela Superior de Medicina-Instituto Politécnico Nacional, Mexico City, Mexico
| | - Laura Álvarez-Mejía
- Instituto Mexicano del Seguro Social, Unidad de Investigación Médica en Enfermedades Neurológicas, Hospital de Especialidades, Centro Médico Nacional Siglo XXI. Av. Cuauhtémoc 330, Col. Doctores, México City, CP, 06720, México
- Proyecto Camina A.C. Research Center, Mexico City, CP, 14050, Mexico
- Departamento de Física, Instituto Nacional de Investigaciones Nucleares. Carretera Mexico-Toluca, km 36.5, Ocoyoacac, State of Mexico, CP, 52750, Mexico
| | | | - Vinnitsa Buzoianu-Anguiano
- Instituto Mexicano del Seguro Social, Unidad de Investigación Médica en Enfermedades Neurológicas, Hospital de Especialidades, Centro Médico Nacional Siglo XXI. Av. Cuauhtémoc 330, Col. Doctores, México City, CP, 06720, México
| | - Pablo Damián-Matsumura
- Doctorate in Biological and Health Sciences, Universidad Autónoma Metropolitana, Iztapalapa, Mexico City, CP, 09340, Mexico
| | - Hermelinda Salgado-Ceballos
- Instituto Mexicano del Seguro Social, Unidad de Investigación Médica en Enfermedades Neurológicas, Hospital de Especialidades, Centro Médico Nacional Siglo XXI. Av. Cuauhtémoc 330, Col. Doctores, México City, CP, 06720, México.
- Proyecto Camina A.C. Research Center, Mexico City, CP, 14050, Mexico.
| |
Collapse
|
5
|
Hatoko M, Komasa S, Zhang H, Sekino T, Okazaki J. UV Treatment Improves the Biocompatibility and Antibacterial Properties of Crystallized Nanostructured Titanium Surface. Int J Mol Sci 2019; 20:ijms20235991. [PMID: 31795108 PMCID: PMC6928612 DOI: 10.3390/ijms20235991] [Citation(s) in RCA: 14] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/25/2019] [Revised: 11/21/2019] [Accepted: 11/27/2019] [Indexed: 12/27/2022] Open
Abstract
This study describes the production of a new material composed of pure titanium (Ti) metal with a crystallized nanostructure and investigated whether heat treatment and ultraviolet (UV) irradiation improved its biocompatibility and antibacterial properties. We compared the performance of UV-irradiated and non-irradiated Ti nanosheets (TNS) formed by dark alkaline treatment and heating at 600 °C with that of untreated pure Ti nanostructure (positive control). In vitro and in vivo experiments to assess biocompatibility and effects on cell behavior were performed using human umbilical vein endothelial cells and rat bone marrow cells. The material surface was characterized by X-ray photoelectron spectroscopy (XPS). The antibacterial properties of the irradiated material were evaluated using Staphylococcus aureus, a common pathogenic bacterium. The UV-irradiated TNS exhibited high angiogenic capacity and promoted cell adherence and differentiation relative to the control. Further, surface analysis via XPS revealed a lower C peak for the UV-treated material, indicating a reduced amount of dirt on the material surface. Moreover, UV irradiation decreased the viability of S. aureus on the material surface by stimulating reactive oxygen species production. The biocompatibility and antibacterial properties of the TNS were improved by UV irradiation. Thus, TNS may serve as a useful material for fabrication of dental implants.
Collapse
Affiliation(s)
- Mai Hatoko
- Department of Removable Prosthodontics and Occlusion, Osaka Dental University, 8-1, Kuzuhahanazono-cho, Hirakata-shi, Osaka 573-1121, Japan; (M.H.); (H.Z.); (J.O.)
| | - Satoshi Komasa
- Department of Removable Prosthodontics and Occlusion, Osaka Dental University, 8-1, Kuzuhahanazono-cho, Hirakata-shi, Osaka 573-1121, Japan; (M.H.); (H.Z.); (J.O.)
- Correspondence:
| | - Honghao Zhang
- Department of Removable Prosthodontics and Occlusion, Osaka Dental University, 8-1, Kuzuhahanazono-cho, Hirakata-shi, Osaka 573-1121, Japan; (M.H.); (H.Z.); (J.O.)
| | - Tohru Sekino
- The Institute of Scientific and Industrial Research, Osaka University, Suita, Osaka 565-0871, Japan;
| | - Joji Okazaki
- Department of Removable Prosthodontics and Occlusion, Osaka Dental University, 8-1, Kuzuhahanazono-cho, Hirakata-shi, Osaka 573-1121, Japan; (M.H.); (H.Z.); (J.O.)
| |
Collapse
|
6
|
Castillo RR, Vallet-Regí M. Functional Mesoporous Silica Nanocomposites: Biomedical applications and Biosafety. Int J Mol Sci 2019; 20:E929. [PMID: 30791663 PMCID: PMC6413128 DOI: 10.3390/ijms20040929] [Citation(s) in RCA: 33] [Impact Index Per Article: 6.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/28/2019] [Revised: 02/15/2019] [Accepted: 02/16/2019] [Indexed: 02/07/2023] Open
Abstract
The rise and development of nanotechnology has enabled the creation of a wide number of systems with new and advantageous features to treat cancer. However, in many cases, the lone application of these new nanotherapeutics has proven not to be enough to achieve acceptable therapeutic efficacies. Hence, to avoid these limitations, the scientific community has embarked on the development of single formulations capable of combining functionalities. Among all possible components, silica-either solid or mesoporous-has become of importance as connecting and coating material for these new-generation therapeutic nanodevices. In the present review, the most recent examples of fully inorganic silica-based functional composites are visited, paying particular attention to those with potential biomedical applicability. Additionally, some highlights will be given with respect to their possible biosafety issues based on their chemical composition.
Collapse
Affiliation(s)
- Rafael R Castillo
- Dpto. Química en Ciencias Farmacéuticas. Facultad de Farmacia, Universidad Complutense de Madrid, Plaza Ramón y Cajal s/n, 28040 Madrid, Spain.
- Centro de Investigación Biomédica en Red-CIBER, 28029 Madrid, Spain.
- Instituto de Investigación Sanitaria Hospital 12 de Octubre-imas12, 28041 Madrid, Spain.
| | - María Vallet-Regí
- Dpto. Química en Ciencias Farmacéuticas. Facultad de Farmacia, Universidad Complutense de Madrid, Plaza Ramón y Cajal s/n, 28040 Madrid, Spain.
- Centro de Investigación Biomédica en Red-CIBER, 28029 Madrid, Spain.
- Instituto de Investigación Sanitaria Hospital 12 de Octubre-imas12, 28041 Madrid, Spain.
| |
Collapse
|
7
|
Hirota M, Ikeda T, Tabuchi M, Nakagawa K, Park W, Ishijima M, Tsukimura N, Hagiwara Y, Ogawa T. Bone Generation Profiling Around Photofunctionalized Titanium Mesh. Int J Oral Maxillofac Implants 2016; 31:73-86. [PMID: 26800164 DOI: 10.11607/jomi.4036] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
PURPOSE The aim of this study was to evaluate whether photofunctionalization of titanium mesh enhances its osteoconductive capability. MATERIALS AND METHODS The titanium mesh (0.2 mm thickness) used in this study was made of commercially pure grade-2 titanium and had hexagonal apertures (2 mm width). Photofunctionalization was performed by treating titanium mesh with UV light for 12 minutes using a photo device immediately before use. Untreated or photofunctionalized titanium mesh was placed into rat femurs, and bone generation around titanium mesh was profiled using three-dimensional (3D) microcomputed tomography (micro-CT). A set of in vitro experiments was conducted using bone marrow-derived osteoblasts. RESULTS Photofunctionalized titanium mesh surfaces were characterized by the regenerated hydrophilicity and significantly reduced surface carbon. Bone generation profiling at week 3 of healing showed that the hexagonal apertures in photofunctionalized mesh were 95% filled, but they were only 57% filled in untreated mesh, particularly with the center zone remaining as a gap. Bone profiling in slices parallel to the titanium surface showed that photofunctionalized titanium mesh achieved 90% bone occupancy 0 to 400 μm from the surface, compared with only 35% for untreated mesh. Bone occupancy remained as high as 55% 800 to 1,200 μm from photofunctionalized titanium mesh surfaces, compared with less than 20% for untreated mesh. In vitro, photofunctionalized titanium mesh expedited and enhanced attachment and spread of osteoblasts, and increased ALP activity and the rate of mineralization. CONCLUSION This study may provide novel and advanced metrics describing the osteoconductive property of photofunctionalized titanium mesh. Specifically, photofunctionalization not only increased the breadth, but also the 3D range, of osteoconductivity of titanium mesh, enabling space-filling and far-reaching osteoconductivity. Further translational and clinical studies are warranted to establish photofunctionalized titanium mesh as a novel clinical tool for better bone regeneration and augmentation.
Collapse
|
8
|
Li X, Li Y, Chen X, Li B, Gao B, Ren Z, Han G, Mao C. Optically Monitoring Mineralization and Demineralization on Photoluminescent Bioactive Nanofibers. Langmuir 2016; 32:3226-3233. [PMID: 27010624 DOI: 10.1021/acs.langmuir.6b00290] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Bone regeneration and scaffold degradation do not usually follow the same rate, representing a daunting challenge in bone repair. Toward this end, we propose to use an external field such as light (in particular, a tissue-penetrating near-infrared light) to precisely monitor the degradation of the mineralized scaffold (demineralization) and the formation of apatite mineral (mineralization). Herein, CaTiO3:Yb(3+),Er(3+)@bioactive glass (CaTiO3:Yb(3+),Er(3+)@BG) nanofibers with upconversion (UC) photoluminescence (PL) were synthesized. Such nanofibers are biocompatible and can emit green and red light under 980 nm excitation. The UC PL intensity is quenched during the bone-like apatite formation on the surface of the nanofibers in simulated body fluid; more mineral formation on the nanofibers induces more rapid optical quenching of the UC PL. Furthermore, the quenched UC PL can recover back to its original magnitude when the apatite on the nanofibers is degraded. Our work suggests that it is possible to optically monitor the apatite mineralization and demineralization on the surface of nanofibers used in bone repair.
Collapse
Affiliation(s)
- Xiang Li
- State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University , Hangzhou 310027, P.R. China
| | - Yangyang Li
- State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University , Hangzhou 310027, P.R. China
| | - Xiaoyi Chen
- Clinical Research Institute, Zhejiang Provincial People's Hospital , Hangzhou 310014, P.R. China
| | - Binbin Li
- State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University , Hangzhou 310027, P.R. China
| | - Bo Gao
- Department of Prosthetic Dentistry, Second Affiliated Hospital, College of Medicine, Zhejiang University , Hangzhou 310009, P.R. China
| | - Zhaohui Ren
- State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University , Hangzhou 310027, P.R. China
| | - Gaorong Han
- State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University , Hangzhou 310027, P.R. China
| | - Chuanbin Mao
- State Key Laboratory of Silicon Materials, School of Materials Science and Engineering, Zhejiang University , Hangzhou 310027, P.R. China
- Department of Chemistry & Biochemistry, Stephenson Life Sciences Research Center, University of Oklahoma , 101 Stephenson Parkway, Norman, Oklahoma 73019-5300, United States
| |
Collapse
|
9
|
Sun Z, Liu S, Li K, Tan L, Cen L, Fu G. Well-defined and biocompatible hydrogels with toughening and reversible photoresponsive properties. Soft Matter 2016; 12:2192-2199. [PMID: 26744299 DOI: 10.1039/c5sm02129d] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
In the present study, novel hydrogels with extremely high strength, reversible photoresponsive and excellent biocompatible properties were prepared. The functional hydrogels were synthesized from a well-defined poly (ethylene glycol) polymer with spiropyran groups at a given position (PEG-SP) via a Cu(i)-catalyst Azide-Alkyne Cycloaddition (CuAAC) reaction. The molecular structures of the sequential intermediates for PEG-SP hydrogel preparation were verified by (1)HNMR and FT-IR. The mechanical property, swelling ratio, compression strength, surface hydrophilicity, and biocompatibility of the resulting hydrogel were characterized. Since spiropyran is pivotal to the switch in hydrophilicity on the hydrogel surface, the swelling ratio of PEG-SP hydrogel under Vis irradiation has a major decrease (155%). Before and after UV light irradiation, the contact angle of the hydrogel has a change of 13.8°. The photoresponsive property of this hydrogel was thus demonstrated, and such a property was also shown to be reversible. The well-defined PEG-SP hydrogel can also sustain a compressive stress of 49.8 MPa without any macro- or micro-damage, indicating its outstanding mechanical performance. Furthermore, it possessed excellent biocompatibility as demonstrated by its performance in an in vivo porcine subcutaneous implantation environment. No inflammation was observed and it got along well with the adjacent tissue. The above features indicate that PEG-SP hydrogels are promising as an implantable matrix for potential applications in biomaterial.
Collapse
Affiliation(s)
- Zhiqiang Sun
- School of Chemistry and Chemical Engineering, Southeast University, Jiangning District, Nanjing, Jiangsu Province 211189, P. R. China.
| | | | | | | | | | | |
Collapse
|
10
|
Benafan O, Chen SY, Kar A, Vaidyanathan R. Laser surface modification of medical grade alloys for reduced heating in a magnetic resonance imaging environment. Rev Sci Instrum 2015; 86:123903. [PMID: 26724043 DOI: 10.1063/1.4936970] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Nanoscale surface modification of medical grade metallic alloys was conducted using a neodymium-doped yttrium aluminum garnet laser-based dopant diffusion technique. The objective of this approach was to minimize the induction heating by reducing the absorbed radio frequency field. Such an approach is advantageous in that the dopant is diffused into the alloy and is not susceptible to detachment or spallation as would an externally applied coating, and is expected to not deteriorate the mechanical and electrical properties of the base alloy or device. Experiments were conducted using a controlled environment laser system with the ability to control laser properties (i.e., laser power, spot size, and irradiation time) and dopant characteristics (i.e., temperature, concentration, and pressure). The reflective and transmissive properties of both the doped and untreated samples were measured in a radio frequency (63.86 MHz) magnetic field using a system comprising a high power signal generator, a localized magnetic field source and sensor, and a signal analyzer. The results indicate an increase in the reflectivity of the laser-treated samples compared to untreated samples. The effect of reflectivity on the heating of the alloys is investigated through a mathematical model incorporating Maxwell's equations and heat conduction.
Collapse
Affiliation(s)
- O Benafan
- Advanced Materials Processing and Analysis Center (AMPAC), Materials Science and Engineering, Mechanical and Aerospace Engineering, University of Central Florida, Orlando, Florida 32816, USA
| | - S-Y Chen
- Laser-Advanced Materials Processing Laboratory, Center for Research and Education in Optics and Lasers (CREOL), College of Optics and Photonics, University of Central Florida, Orlando, Florida 32816, USA
| | - A Kar
- Laser-Advanced Materials Processing Laboratory, Center for Research and Education in Optics and Lasers (CREOL), College of Optics and Photonics, University of Central Florida, Orlando, Florida 32816, USA
| | - R Vaidyanathan
- Advanced Materials Processing and Analysis Center (AMPAC), Materials Science and Engineering, Mechanical and Aerospace Engineering, University of Central Florida, Orlando, Florida 32816, USA
| |
Collapse
|
11
|
Chen J, Yang P, Liao Y, Wang J, Chen H, Sun H, Huang N. Effect of the duration of UV irradiation on the anticoagulant properties of titanium dioxide films. ACS Appl Mater Interfaces 2015; 7:4423-4432. [PMID: 25679095 DOI: 10.1021/am509006y] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
Recently, UV irradiation has been reported as a new approach to significantly improve the anticoagulant properties of titanium dioxide (TiO2) films by suppressing fibrinogen adsorption and platelet adhesion. This study focuses on how fibrinogen adsorption of and platelet adhesion to TiO2 films is affected by the duration of UV irradiation. Furthermore, this study intends to describe the link between the suppression effect and the changes in the TiO2 films nature caused by photogenerated reactive oxygen species (ROS). First, we performed UV irradiation in different atmospheres as model 1 to determine the effect of oxygen gas on the anticoagulant properties of TiO2 films. The results showed that the suppression of platelet adhesion induced by UV irradiation depended on the presence of oxygen gas, indicating that ROS were photogenerated, and the ROS-induced surface change was related to the improvement in the anticoagulant ability. Then, we fabricated three other types of TiO2 samples in air by varying the UV irradiation time: (1) model 2, comprising fully UV-irradiated TiO2 films, (2) model 3, comprising partially UV-irradiated TiO2 films, and (3) model 4, comprising fully UV-irradiated TiO2-Si micropatterns. The results indicated that UV irradiation affected the anticoagulant properties of TiO2 films in a time-dependent manner. UV irradiation on TiO2 films for short duration (e.g., 1 min) evidenced a suppression effect on fibrinogen adsorption and platelet adhesion, an effect that could not be the result of photoinduced superhydrophilicity, increased hydroxyl groups (-OH) number, or decomposition of the adsorbed hydrocarbon. When the UV irradiation time was longer, this suppression effect extended from the surface of the UV-irradiated TiO2 films to the surface of the adjacent masked TiO2 films and the nearby Si surface. This result supported that the suppression effect could be related to the changes in the nature of the TiO2 films that were caused by the photogenerated and diffused ROS. Further, this extension of the suppression effect to the Si surface indicated that the photogenerated ROS could be used to improve the anticoagulant properties of other materials. A prolonged UV irradiation time (e.g., 240 min) may enhance the fibrinogen adsorption of and platelet adhesion to TiO2 films, which could be related to the decomposition of the adsorbed hydrocarbon and the increase in the positive charge. However, when comparing the enhancement effect and the suppression effect, the results showed that the latter was the main one to influence fibrinogen adsorption of and platelet adhesion to TiO2 films. This study provides an important basis for understanding the behavior of UV-irradiated TiO2 films as anticoagulant materials.
Collapse
Affiliation(s)
- Jiang Chen
- Institute of Biomaterials and Surface Engineering, Key Laboratory for Advanced Technologies of Materials, Ministry of Education, Southwest Jiaotong University , Chengdu 610031, People's Republic of China
| | | | | | | | | | | | | |
Collapse
|
12
|
Maleki-Ghaleh H, Khalil-Allafi J, Sadeghpour-Motlagh M, Shakeri MS, Masoudfar S, Farrokhi A, Beygi Khosrowshahi Y, Nadernezhad A, Siadati MH, Javidi M, Shakiba M, Aghaie E. Effect of surface modification by nitrogen ion implantation on the electrochemical and cellular behaviors of super-elastic NiTi shape memory alloy. J Mater Sci Mater Med 2014; 25:2605-2617. [PMID: 25064465 DOI: 10.1007/s10856-014-5283-4] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/15/2014] [Accepted: 07/17/2014] [Indexed: 06/03/2023]
Abstract
The aim of this investigation was to enhance the biological behavior of NiTi shape memory alloy while preserving its super-elastic behavior in order to facilitate its compatibility for application in human body. The surfaces of NiTi samples were bombarded by three different nitrogen doses. Small-angle X-ray diffraction was employed for evaluating the generated phases on the bombarded surfaces. The electrochemical behaviors of the bare and surface-modified NiTi samples were studied in simulated body fluid (SBF) using electrochemical impedance and potentio-dynamic polarization tests. Ni ion release during a 2-month period of service in the SBF environment was evaluated using atomic absorption spectrometry. The cellular behavior of nitrogen-modified samples was studied using fibroblast cells. Furthermore, the effect of surface modification on super-elasticity was investigated by tensile test. The results showed the improvement of both corrosion and biological behaviors of the modified NiTi samples. However, no significant change in the super-elasticity was observed. Samples modified at 1.4E18 ion cm(-2) showed the highest corrosion resistance and the lowest Ni ion release.
Collapse
Affiliation(s)
- H Maleki-Ghaleh
- Research Center for Advanced Materials and Mineral Processing, Faculty of Materials Engineering, Sahand University of Technology, P.O. Box: 51335-11996, Tabriz, Iran,
| | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
13
|
Nargang TM, Brockmann L, Nikolov PM, Schild D, Helmer D, Keller N, Sachsenheimer K, Wilhelm E, Pires L, Dirschka M, Kolew A, Schneider M, Worgull M, Giselbrecht S, Neumann C, Rapp BE. Liquid polystyrene: a room-temperature photocurable soft lithography compatible pour-and-cure-type polystyrene. Lab Chip 2014; 14:2698-708. [PMID: 24887072 DOI: 10.1039/c4lc00045e] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/27/2023]
Abstract
Materials matter in microfluidics. Since the introduction of soft lithography as a prototyping technique and polydimethylsiloxane (PDMS) as material of choice the microfluidics community has settled with using this material almost exclusively. However, for many applications PDMS is not an ideal material given its limited solvent resistance and hydrophobicity which makes it especially disadvantageous for certain cell-based assays. For these applications polystyrene (PS) would be a better choice. PS has been used in biology research and analytics for decades and numerous protocols have been developed and optimized for it. However, PS has not found widespread use in microfluidics mainly because, being a thermoplastic material, it is typically structured using industrial polymer replication techniques. This makes PS unsuitable for prototyping. In this paper, we introduce a new structuring method for PS which is compatible with soft lithography prototyping. We develop a liquid PS prepolymer which we term as "Liquid Polystyrene" (liqPS). liqPS is a viscous free-flowing liquid which can be cured by visible light exposure using soft replication templates, e.g., made from PDMS. Using liqPS prototyping microfluidic systems in PS is as easy as prototyping microfluidic systems in PDMS. We demonstrate that cured liqPS is (chemically and physically) identical to commercial PS. Comparative studies on mouse fibroblasts L929 showed that liqPS cannot be distinguished from commercial PS in such experiments. Researchers can develop and optimize microfluidic structures using liqPS and soft lithography. Once the device is to be commercialized it can be manufactured using scalable industrial polymer replication techniques in PS--the material is the same in both cases. Therefore, liqPS effectively closes the gap between "microfluidic prototyping" and "industrial microfluidics" by providing a common material.
Collapse
Affiliation(s)
- Tobias M Nargang
- Institute of Microstructure Technology (IMT), Karlsruhe Institute of Technology (KIT), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany.
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
14
|
Liu Z, Lin Q, Sun Y, Liu T, Bao C, Li F, Zhu L. Spatiotemporally controllable and cytocompatible approach builds 3D cell culture matrix by photo-uncaged-thiol Michael addition reaction. Adv Mater 2014; 26:3912-7. [PMID: 24652710 DOI: 10.1002/adma.201306061] [Citation(s) in RCA: 65] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/11/2013] [Revised: 02/12/2014] [Indexed: 05/25/2023]
Affiliation(s)
- Zhenzhen Liu
- Key Laboratory for Advanced Materials, Institute of Fine Chemicals, East China University of Science and Technology, 130# Meilong Road, Shanghai, 200237, China
| | | | | | | | | | | | | |
Collapse
|
15
|
Wang C, Qiao Q, Shokuhfar T, Klie RF. High-resolution electron microscopy and spectroscopy of ferritin in biocompatible graphene liquid cells and graphene sandwiches. Adv Mater 2014; 26:3410-3414. [PMID: 24497051 DOI: 10.1002/adma.201306069] [Citation(s) in RCA: 94] [Impact Index Per Article: 9.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/11/2013] [Revised: 01/13/2014] [Indexed: 06/03/2023]
Abstract
Atomic and electronic structures of hydrated ferritin are characterized using electron microscopy and spectroscopy through encapsulation in single layer graphene in a biocompatible manner. Graphene's ability to reduce radiation damage levels to hydrogen bond breakage is demonstrated. A reduction of iron valence from 3+ to 2+ is measured at nanometer-resolution in ferritin, showing initial stages of iron release by ferritin.
Collapse
Affiliation(s)
- Canhui Wang
- Department of Physics, University of Illinois at Chicago, Chicago, IL, 60607, USA
| | | | | | | |
Collapse
|
16
|
Allegrini S, Yoshimoto M, Salles MB, de Almeida Bressiani AH. Biologic response to titanium implants with laser-treated surfaces. Int J Oral Maxillofac Implants 2014; 29:63-70. [PMID: 24451855 DOI: 10.11607/jomi.3213] [Citation(s) in RCA: 8] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022] Open
Abstract
PURPOSE To examine the biologic response to titanium implant surfaces treated with a neodymium:yttrium-aluminum-garnet laser. MATERIALS AND METHODS Sixty mini-implants made of grade 2 titanium were placed in the femora of 30 Wistar rats. Thirty implants had a machined surface and the other 30 had surfaces that were roughened by laser treatment. The animals were subdivided into three groups according to bone repair periods of 15, 30, and 60 days. The samples were observed under light and electron scanning microscopes and analyzed with the Student t test. RESULTS Formation of new bone trabeculae toward the surface was apparent for the laser-treated implants at 15 days. Thin layers of bone matrix in intimate contact with the surface in the area of the central screw threads were observed, indicating high biocompatibility. Similar results were seen with machined implants after 30 days. A significant difference in bone formation was observed between the implant types at 15 days. CONCLUSION Bone-to-implant contact was better on the surfaces subjected to laser treatment than on the machined titanium implants. The development of new laser treatments, which promote alterations in the surface energy as well as in the macro- and microstructures of titanium, may lead to improved bone-to-implant contact and thus better outcomes.
Collapse
|
17
|
Zhong Y, Tian G, Gu Z, Yang Y, Gu L, Zhao Y, Ma Y, Yao J. Elimination of photon quenching by a transition layer to fabricate a quenching-shield sandwich structure for 800 nm excited upconversion luminescence of Nd3+-sensitized nanoparticles. Adv Mater 2014; 26:2831-7. [PMID: 24338994 DOI: 10.1002/adma.201304903] [Citation(s) in RCA: 252] [Impact Index Per Article: 25.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/01/2013] [Revised: 10/29/2013] [Indexed: 05/21/2023]
Abstract
Nd3+-sensitized quenching-shield sandwich-structured upconversion nanoparticles are reported, which exhibit highly efficient upconversion photoluminescence under excitation by an 800 nm continuous-wave laser. The transition-layer structure is essential to bridge energy transfer from the sensitizer to the activator and simultaneously block energy back-transfer from the activator to the sensitizer. These 800 nm-excited upconversion nanoparticles are a key step toward the development of upconversion nanophosphors for biological applications.
Collapse
Affiliation(s)
- Yeteng Zhong
- Beijing National Laboratory for Molecular Science, Key Laboratory of Photochemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China
| | | | | | | | | | | | | | | |
Collapse
|
18
|
Stoppel WL, White JC, Horava SD, Henry AC, Roberts SC, Bhatia SR. Terminal sterilization of alginate hydrogels: efficacy and impact on mechanical properties. J Biomed Mater Res B Appl Biomater 2014; 102:877-84. [PMID: 24259507 PMCID: PMC8218599 DOI: 10.1002/jbm.b.33070] [Citation(s) in RCA: 47] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/27/2013] [Revised: 09/21/2013] [Accepted: 10/20/2013] [Indexed: 11/08/2022]
Abstract
Terminal, or postprocessing, sterilization of composite biomaterials is crucial for their use in wound healing and tissue-engineered devices. Recent research has focused on optimizing traditional biomaterial formulations to create better products for commercial and academic use which incorporate hydrophobic compounds or secondary gel networks. To use a hydrogel in a clinical setting, terminal sterilization is necessary to ensure patient safety. Lyophilization, gamma-irradiation, and ethylene oxide treatment all have negative consequences when applied to alginate scaffolds for clinical use. Here, we aim to find alternative terminal sterilization methods for alginate and alginate-based composite hydrogels which maintain the structure of composite alginate networks for use in biomedical applications. A thorough investigation of the effect of common sterilization methods on swollen alginate-based hydrogels has not been reported and therefore, this work examines autoclaving, ethanol washing, and ultraviolet light as sterilization techniques for alginate and alginate/Pluronic® F68 composite hydrogels. Preservation of structural integrity is evaluated using shear rheology and analysis of water retention, and efficacy of sterilization is determined via bacterial persistence within the hydrogel. Results indicate that ethanol sterilization is the best method of those investigated because ethanol washing results in minimal effects on mechanical properties and water retention and eliminates bacterial persistence. Furthermore, this study suggests that ethanol treatment is an efficacious method for terminally sterilizing interpenetrating networks or other composite hydrogel systems.
Collapse
Affiliation(s)
- Whitney L Stoppel
- Department of Chemical Engineering, University of Massachusetts Amherst, Amherst, Massachusetts, 01003
| | | | | | | | | | | |
Collapse
|
19
|
Biswas A, Saha A, Ghosh D, Jana B, Ghosh S. Co- and distinct existence of Tris-NTA and biotin functionalities on individual and adjacent micropatterned surfaces generated by photo-destruction. Soft Matter 2014; 10:2341-2345. [PMID: 24623362 DOI: 10.1039/c3sm53000k] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Micropatterned surfaces with Tris-NTA and biotin functionalities both in the same micropattern as well as individually in adjacent micropatterns are generated by UV light illumination through photo-masks. These surfaces are extremely useful for the immobilization of oligohistidine and biotin tagged multiple biomolecules/proteins.
Collapse
Affiliation(s)
- Atanu Biswas
- Chemistry Division, CSIR-Indian Institute of Chemical Biology, 4 Raja S. C. Mullick Road, Jadavpur, Kolkata-700032, West Bengal, India.
| | | | | | | | | |
Collapse
|
20
|
Fisher ER. Challenges in the characterization of plasma-processed three-dimensional polymeric scaffolds for biomedical applications. ACS Appl Mater Interfaces 2013; 5:9312-9321. [PMID: 24028344 DOI: 10.1021/am4025966] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Low-temperature plasmas offer a versatile method for delivering tailored functionality to a range of materials. Despite the vast array of choices offered by plasma processing techniques, there remain a significant number of hurdles that must be overcome to allow this methodology to realize its full potential in the area of biocompatible materials. Challenges include issues associated with analytical characterization, material structure, plasma processing, and uniform composition following treatment. Specific examples and solutions are presented utilizing results from analyses of three-dimensional (3D) poly(ε-caprolactone) scaffolds treated with different plasma surface modification strategies that illustrate these challenges well. Notably, many of these strategies result in 3D scaffolds that are extremely hydrophilic and that enhance human Saos-2 osteoblast cell growth and proliferation, which are promising results for applications including tissue engineering and advanced biomedical devices.
Collapse
Affiliation(s)
- Ellen R Fisher
- Department of Chemistry, Colorado State University , Fort Collins, Colorado 80523-1872, United States
| |
Collapse
|
21
|
Pavicic T. Calcium hydroxylapatite filler: an overview of safety and tolerability. J Drugs Dermatol 2013; 12:996-1002. [PMID: 24002146] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Soft tissue fillers are becoming increasingly important as nonsurgical treatment options for facial rejuvenation. Calcium hydroxylapatite (CaHA) is an injectable dermal filler that contains uniform CaHA microspheres suspended in an aqueous carboxymethylcellulose gel carrier. It is considered a long-lasting, but non-permanent filler, and is highly biocompatible with human tissue. No osteogenesis has been reported in extensive literature describing the use of CaHA in a variety of soft tissue applications. Injection of CaHA into the oral mucosa and the lips is an unapproved indication and may result in nodule formation. This occurs soon after injection and is a result of accumulated particles and not a granulomatous reaction. As with all biodegradable dermal fillers, CaHA can be associated with rare incidences of foreign body reactions, but only a handful of case reports have been documented in 10 years of clinical use. CaHA can be associated with local, short-term, injection-related adverse events, which are generally mild and resolve within a few days. Clinical trials that have followed patients for up to 3 years post-injection report no long-term or delayed-onset adverse events. CaHA is an effective and safe treatment option for a variety of aesthetic indications. This paper focuses on common safety concerns of patients and aesthetic physicians, including unfounded fears of osteogenesis and foreign body granulomas, providing an up-to-date overview of the tolerability and long-term safety of CaHA for aesthetic indications.
Collapse
|
22
|
Yang X, Cui C, Tong Z, Sabanayagam CR, Jia X. Poly(ε-caprolactone)-based copolymers bearing pendant cyclic ketals and reactive acrylates for the fabrication of photocrosslinked elastomers. Acta Biomater 2013; 9:8232-44. [PMID: 23770222 PMCID: PMC3732508 DOI: 10.1016/j.actbio.2013.06.005] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/03/2013] [Revised: 04/25/2013] [Accepted: 06/03/2013] [Indexed: 11/27/2022]
Abstract
Block copolymers of poly(ethylene glycol) and poly(ε-caprolactone) (PCL) with chemically addressable functional groups were synthesized and characterized. Ring-opening polymerization of ε-caprolactone (CL) and 1,4,8-trioxaspiro-[4,6]-9-undecanone (TSU) using α-methoxy, ω-hydroxyl poly(ethylene glycol) as the initiator afforded a copolymer with cyclic ketals being randomly distributed in the hydrophobic PCL block. At an initiator/catalyst molar ratio of 10/1 and a TSU/CL weight ratio of 1/4, a ketal-carrying copolymer (ECT2-CK) with Mn of 52 kDa and a ketal content of 15 mol.% was obtained. Quantitative side-chain deacetalization revealed the reactive ketones without noticeable polymer degradation. In our study, 10 mol.% of cyclic ketals were deprotected and the ketone-containing copolymer was designated as ECT2-CO. Reaction of ECT2-CO with 2-(2-(aminooxy)acetoxy)-ethyl acrylate gave rise to an acrylated product (ECT2-AC) containing an estimated 3-5 acrylate groups per chain. UV-initiated radical polymerization of ECT2-AC in dichloromethane resulted in a crosslinked network (xECT2-AC). Thermal and morphological analyses employing differential scanning calorimetry and atomic force microscopy operated in PeakForce Tapping mode revealed the semicrystalline nature of the network, which contained stiff crystalline lamellae dispersed in a softer amorphous interstitial. Macroscopic and nanoscale mechanical characterizations showed that ECT2-CK exhibited a significantly lower modulus than PCL of a similar molecular weight. Whereas ECT2-CK undergoes a plastic deformation with a distinct yield point and a cold-drawing region, xECT2-AC exhibits a compliant, elastomeric deformation with a Young's modulus of 0.5±0.1 MPa at 37°C. When properly processed, the crosslinked network exhibited shape-memory behaviors, with shape fixity and shape recovery values close to 1 and a shape recovery time of less than 4s at 37°C. In vitro studies showed that xECT2-AC films did not induce any cytotoxic effects on the cultured mesenchymal stem cells. The crosslinkable polyester copolymers can be potentially used as tissue engineering scaffolds and minimally invasive medical devices.
Collapse
Affiliation(s)
- Xiaowei Yang
- Department of Materials Science and Engineering, University of Delaware, Newark, DE 19716, USA
| | - Chengzhong Cui
- Department of Materials Science and Engineering, University of Delaware, Newark, DE 19716, USA
| | - Zhixiang Tong
- Department of Materials Science and Engineering, University of Delaware, Newark, DE 19716, USA
| | | | - Xinqiao Jia
- Department of Materials Science and Engineering, University of Delaware, Newark, DE 19716, USA
- Delaware Biotechnology Institute, University of Delaware, Newark, DE 19711, USA
- Biomedical Engineering Program, University of Delaware, Newark, DE 19716, USA
| |
Collapse
|
23
|
Tajitsu Y. Fundamental study on improvement of piezoelectricity of poly(ι-lactic acid) and its application to film actuators. IEEE Trans Ultrason Ferroelectr Freq Control 2013; 60:1625-1629. [PMID: 25004534 DOI: 10.1109/tuffc.2013.2744] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
We designed a new film actuator, whose driving force is generated by a surface wave, which induces rotational motion. Its performance is similar to that of a rotation motor even though the new film actuator has no complex mechanical parts. To realize the film actuator, we used a poly(l-lactic acid) (PLLA) film with improved piezoelectricity. First, we theoretically investigated the necessary conditions for a surface wave to be generated on the end face of a PLLA film by the fusion of its shear piezoelectricity and resonance, and then experimentally realized this. Using the actuator made using the PLLA film, we demonstrated that the clockwise and counterclockwise rotation of an object placed on the end face of the PLLA film actuator could be freely controlled by changing the frequency of the ac voltage applied to the actuator.
Collapse
|
24
|
Rekštytė S, Malinauskas M, Juodkazis S. Three-dimensional laser micro-sculpturing of silicone: towards bio-compatible scaffolds. Opt Express 2013; 21:17028-41. [PMID: 23938551 DOI: 10.1364/oe.21.017028] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Possibility to form three-dimensional (3D) micro-structures in silicone elastomer (polydimethylsiloxane; PDMS) doped with different photo-initiators was systematically investigated using direct laser writing with femtosecond laser pulses at different exposure conditions. Accuracy of the 3D structuring with resolution of ~5 μm and a fabrication throughput of ~720 μm(3)/s, which is exceeding the previously reported values by ~ 300(×), was achieved. Practical recording velocities of ~ 1 mm/s were used in PDMS with isopropyl-9H-thioxanthen-9-one (ISO) and thioxanthen-9-one (THIO) photo-initiators which both have absorption at around 360 nm wavelength. The 3D laser fabrication in PDMS without any photo-initiator resulting in a fully bio-compatible material has been achieved for the first time. Rates of multi-photon absorption and avalanche for the structuring of silicone are revealed: the two-photon absorption is seeding the avalanche of a radical generation for subsequent cross-linking. Direct writing enables a maskless manufacturing of molds for soft-lithography and 3D components for microfluidics as well as scaffolds for grafts in biomedical applications.
Collapse
Affiliation(s)
- Sima Rekštytė
- Laser Research Center, Department of Quantum Electronics, Physics Faculty,VilniusUniversity, Sauletekio Ave 10, LT-10223 Vilnius, Lithuania
| | | | | |
Collapse
|
25
|
Dargaville BL, Vaquette C, Rasoul F, Cooper-White JJ, Campbell JH, Whittaker AK. Electrospinning and crosslinking of low-molecular-weight poly(trimethylene carbonate-co-(L)-lactide) as an elastomeric scaffold for vascular engineering. Acta Biomater 2013; 9:6885-97. [PMID: 23416575 DOI: 10.1016/j.actbio.2013.02.009] [Citation(s) in RCA: 49] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/15/2012] [Revised: 01/29/2013] [Accepted: 02/05/2013] [Indexed: 11/17/2022]
Abstract
The growth of suitable tissue to replace natural blood vessels requires a degradable scaffold material that is processable into porous structures with appropriate mechanical and cell growth properties. This study investigates the fabrication of degradable, crosslinkable prepolymers of l-lactide-co-trimethylene carbonate into porous scaffolds by electrospinning. After crosslinking by γ-radiation, dimensionally stable scaffolds were obtained with up to 56% trimethylene carbonate incorporation. The fibrous mats showed Young's moduli closely matching human arteries (0.4-0.8MPa). Repeated cyclic extension yielded negligible change in mechanical properties, demonstrating the potential for use under dynamic physiological conditions. The scaffolds remained elastic and resilient at 30% strain after 84days of degradation in phosphate buffer, while the modulus and ultimate stress and strain progressively decreased. The electrospun mats are mechanically superior to solid films of the same materials. In vitro, human mesenchymal stem cells adhered to and readily proliferated on the three-dimensional fiber network, demonstrating that these polymers may find use in growing artificial blood vessels in vivo.
Collapse
Affiliation(s)
- Bronwin L Dargaville
- Australian Institute for Bioengineering and Nanotechnology, University of Queensland, Brisbane, QLD 4072, Australia
| | | | | | | | | | | |
Collapse
|
26
|
Kolesnikova TA, Kohler D, Skirtach AG, Möhwald H. Laser-induced cell detachment, patterning, and regrowth on gold nanoparticle functionalized surfaces. ACS Nano 2012; 6:9585-9595. [PMID: 23066742 DOI: 10.1021/nn302891u] [Citation(s) in RCA: 40] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
We report on the selective cell detachment from nanoengineered gold nanoparticle (AuNP) surfaces triggered by laser irradiation, which occurs in a nonthermal manner. The gold nanoparticle-based surfaces reveal good adhesion of NIH3T3 fibroblast cells. Patterning is achieved by lithographic microcontact printing, selective gold nanoparticle deposition, and by laser beam profiling. It is shown that the effectiveness of fibroblast cell detachment depends on the cell age, laser power, and AuNP patterning profile. Heat distribution and temperature rise around gold nanoparticle functionalized surfaces is modeled, revealing low heating of nanoparticles by laser illumination. The nonthermal photochemical mechanism of cell detachment due to production of reactive oxygen species under illumination of gold nanoparticles by green laser light is studied. We also demonstrate that cells migrate from unirradiated areas leading to their reattachment and surface recovery which is important for controlled spatial organization of cells in wound healing and tissue engineering. Research presented in this work is targeted at designing biointerfaces for cell cultures.
Collapse
Affiliation(s)
- Tatiana A Kolesnikova
- Department of Interfaces, Max-Planck Institute of Colloids and Interfaces, Am Mühlenberg 1 OT Golm, D14476 Potsdam, Germany.
| | | | | | | |
Collapse
|
27
|
Sadlo J, Strzelczak G, Lewandowska-Szumiel M, Sterniczuk M, Pajchel L, Michalik J. Carbon-centered radicals in γ-irradiated bone substituting biomaterials based on hydroxyapatite. J Mater Sci Mater Med 2012; 23:2061-2068. [PMID: 22639150 DOI: 10.1007/s10856-012-4680-9] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/10/2011] [Accepted: 05/11/2012] [Indexed: 06/01/2023]
Abstract
Gamma irradiated synthetic hydroxyapatite, bone substituting materials NanoBone(®) and HA Biocer were examined using EPR spectroscopy and compared with powdered human compact bone. In every case, radiation-induced carbon centered radicals were recorded, but their molecular structures and concentrations differed. In compact bone and synthetic hydroxyapatite the main signal assigned to the CO(2) (-) anion radical was stable, whereas the signal due to the CO(3) (3-) radical dominated in NanoBone(®) and HA Biocer just after irradiation. However, after a few days of storage of these samples, also a CO(2) (-) signal was recorded. The EPR study of irradiated compact bone and the synthetic graft materials suggest that their microscopic structures are different. In FT-IR spectra of NanoBone(®), HA Biocer and synthetic hydroxyapatite the HPO(4) (2-) and CO(3) (2-) in B-site groups are detected, whereas in compact bone signals due to collagen dominate.
Collapse
Affiliation(s)
- Jaroslaw Sadlo
- Institute of Nuclear Chemistry and Technology, Dorodna 16, 03-195, Warsaw, Poland.
| | | | | | | | | | | |
Collapse
|
28
|
Danilevicius P, Rekstyte S, Balciunas E, Kraniauskas A, Jarasiene R, Sirmenis R, Baltriukiene D, Bukelskiene V, Gadonas R, Malinauskas M. Micro-structured polymer scaffolds fabricated by direct laser writing for tissue engineering. J Biomed Opt 2012; 17:081405-1. [PMID: 23224166 DOI: 10.1117/1.jbo.17.8.081405] [Citation(s) in RCA: 22] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/01/2023]
Abstract
This work presents the latest results on direct laser writing of polymeric materials for tissue engineering applications. A femtosecond Yb:KGW laser (300 fs, 200 kHz, 515 nm) was used as a light source for non-linear lithography. Fabrication was implemented in various photosensitive polymeric materials, such as: hybrid organic-inorganic sol-gel based on silicon-zirconium oxides, commercial ORMOCER® class photoresins. These materials were structured via multi-photon polymerization technique with submicron resolution. Porous three-dimensional scaffolds for artificial tissue engineering were fabricated with constructed system and were up to several millimeters in overall size with 10 to 100 μm internal pores. Biocompatibility of the used materials was tested in primary rabbit muscle-derived stem cell culture in vitro and using laboratory rats in vivo. This interdisciplinary study suggests that proposed technique and materials are suitable for tissue engineering applications.
Collapse
Affiliation(s)
- Paulius Danilevicius
- Vilnius University, Faculty of Physics, Department of Quantum Electronics, Laser Research Center, Sauletekio Avenue 10, LT-10223 Vilnius, Lithuania
| | | | | | | | | | | | | | | | | | | |
Collapse
|
29
|
Aboelzahab A, Azad AM, Dolan S, Goel V. Mitigation of Staphylococcus aureus-mediated surgical site infections with ir photoactivated TiO2 coatings on Ti implants. Adv Healthc Mater 2012. [PMID: 23184742 DOI: 10.1002/adhm.201100032] [Citation(s) in RCA: 20] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Surgical site infections caused by methicillin-resistant and methicillin-susceptible Staphylococcus aureus (MRSA, MSSA) lead to patient hospitalization for an extended period coupled with concomitant hospitalization resources and cost. The detrimental effect resulting from the onset of these infections poses great health risks, leading to death in some instances. Titanium dioxide (TiO(2) ) is endowed with the unique capability of photoactivity which has been extensively exploited in antibacterial activities. It has been shown to be very effective in its bactericidal efficacy against infection-causing bacterial strains, namely, E. coli and S. aureus. In this study, the use of IR-photoactivated TiO(2) nanocoatings on titanium implants to mitigate the onset of surgical site infections is described. TiO(2) coatings were created on implantable materials by way of an aqueous plasma electrodeposition technique and were used to mitigate the harmful bacterial growth upon brief activation by an infrared (IR) laser source. The necrosis of S. aureus cells was found to exceed 90% within 30 min. following a 30s exposure of the titania-coated model implants (Ti mesh and plate). Promising potential of antibacterial coatings in mitigating surgical site infections has been shown.
Collapse
Affiliation(s)
- Asem Aboelzahab
- Department of Bioengineering, The University of Toledo, Toledo, OH 43606-3390, USA
| | | | | | | |
Collapse
|
30
|
Wang K, Cai L, Zhang L, Dong J, Wang S. Biodegradable photo-crosslinked polymer substrates with concentric microgrooves for regulating MC3T3-E1 cell behavior. Adv Healthc Mater 2012. [PMID: 23184743 DOI: 10.1002/adhm.201200030] [Citation(s) in RCA: 27] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Abstract
Both intrinsic material properties and topographical features are critical in influencing cell-biomaterial interactions. We present a systematic investigation of regulating mouse pre-osteoblastic MC3T3-E1 cell behavior on biodegradable polymer substrates with distinct mechanical properties and concentric microgrooves. The precursors for fabricating substrates used here were two poly(ϵ-caprolactone) triacrylates (PCLTAs) synthesized from poly(ϵ-caprolactone) triols with molecular weights of ∼7000 and ∼10000 g mol(-1) . These two PCLTAs were photo-crosslinked into PCL networks with distinct thermal, rheological, and mechanical properties at physiological temperature because of their different crystallinities and melting temperatures. Microgrooved substrates with four groove widths of 7.5, 16.1, 44.2, and 91.2 μm and three groove depths of 0.2, 1, and 10 μm were prepared through replica molding, i.e., photo-crosslinking PCLTA on micro-fabricated silicon wafers with pre-designed concentric groove patterns. MC3T3-E1 cell attachment and proliferation could be better supported by the stiffer substrates while not significantly influenced by the microgrooves. Microgroove dimensions could regulate MC3T3-E1 cell alignment, nuclear shape and distribution, mineralization, and gene expression. Among the microgrooves with a fixed depth of 10 μm, the smallest width of 7.5 μm could align and elongate the cytoskeleton and nuclei most efficiently. Strikingly, higher mineral deposition and upregulation of osteocalcin gene expression were found in the narrower microgrooves when the groove depth was 10 μm.
Collapse
Affiliation(s)
- Kan Wang
- Department of Materials Science and Engineering, The University of Tennessee, Knoxville, TN 37996, USA
| | | | | | | | | |
Collapse
|
31
|
Mironi-Harpaz I, Wang DY, Venkatraman S, Seliktar D. Photopolymerization of cell-encapsulating hydrogels: crosslinking efficiency versus cytotoxicity. Acta Biomater 2012; 8:1838-48. [PMID: 22285429 DOI: 10.1016/j.actbio.2011.12.034] [Citation(s) in RCA: 223] [Impact Index Per Article: 18.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2011] [Revised: 12/17/2011] [Accepted: 12/30/2011] [Indexed: 11/16/2022]
Abstract
Cell-encapsulating hydrogels used in regenerative medicine are designed to undergo a rapid liquid-to-solid phase transition in the presence of cells and tissues so as to maximize crosslinking and minimize cell toxicity. Light-activated free-radical crosslinking (photopolymerization) is of particular interest in this regard because it can provide rapid reaction rates that result in uniform hydrogel properties with excellent temporal and spatial control features. Among the many initiator systems available for photopolymerization, only a few have been identified as suitable for cell-based hydrogel formation owing to their water solubility, crosslinking properties and non-toxic reaction conditions. In this study, three long-wave ultraviolet (UV) light-activtied photoinitiators (PIs) were comparatively tested in terms of cytotoxicity, crosslinking efficiency and crosslinking kinetics of cell-encapsulating hydrogels. The hydrogels were photopolymerized from poly(ethylene glycol) (PEG) diacrylate or PEG-fibrinogen precursors using Irgacure® PIs I2959, I184 and I651, as well as with a chemical initiator/accelerator (APS/TEMED). The study specifically evaluated the PI type, PI concentration and UV light intensity, and how these affected the mechanical properties of the hydrogel (i.e. maximum storage modulus), the crosslinking reaction times and the reaction's cytotoxicity to encapsulated cells. Only two initiators (I2959 and I184) were identified as being suitable for achieving both high cell viability and efficient crosslinking of the cell-encapsulating hydrogels during the photopolymerization reaction. Optimization of PI concentration or irradiation intensity was particularly important for achieving maximum mechanical properties; a sub-optimal choice of PI concentration or irradiation intensity resulted in a substantial reduction in hydrogel modulus. Cytocompatibility may be compromised by unnecessarily prolonging exposure to cytotoxic free radicals or inadvertently enhancing the instantaneous dose of radicals in solution, both of which are dependent on the PI type/concentration and irradiation intensity. In the absence of a radical initiator, the short exposures to long-wave UV light irradiation (up to 5 min, 20 mW cm(-2), 365 nm) did not prove to be cytotoxic to cells. Therefore, it is important to understand the relationship between PIs, light irradiation conditions and crosslinking when attempting to identify a suitable hydrogel formation process for cell encapsulating hydrogels.
Collapse
Affiliation(s)
- Iris Mironi-Harpaz
- Faculty of Biomedical Engineering, Technion-Israel Institute of Technology, Haifa 32000, Israel
| | | | | | | |
Collapse
|
32
|
Ozcan C, Hasirci N. Plasma modification of PMMA films: surface free energy and cell-attachment studies. Journal of Biomaterials Science, Polymer Edition 2012; 18:759-73. [PMID: 17623556 DOI: 10.1163/156856207781034124] [Citation(s) in RCA: 41] [Impact Index Per Article: 3.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
Abstract
The surface of a material is the most important part determining the acceptance by and compatibility with the environment. In many cases, although the bulk properties are excellent for a specific application, the surface may require to be modified and engineered in the desired direction. This is especially important for materials used in biological media, since the surface charge, hydophilicity and wettability are important for thrombosis formation, cell attachment or cell proliferation. In this study, poly(methyl methacrylate) films were prepared by solvent casting and their surfaces were modified by oxygen plasma treatment by applying powers of 20, 100 and 300 W. The effects of surface chemistry alterations on hydophilicity, work of adhesion, surface free energy and cell adhesion were examined. Cell attachment and proliferation are especially important for the materials used for tissue-engineering purposes. The results demonstrated that there is an optimum value for hydrophilicity and surface free energy which enhance cell attachment.
Collapse
Affiliation(s)
- Canturk Ozcan
- Middle East Technical University, Faculty of Arts and Sciences, Chemistry Department, Ankara 06531, Turkey
| | | |
Collapse
|
33
|
Abstract
UNLABELLED The interaction of radiation, whether it has natural or artificial, electromagnetic or particle-type characterizations, with materials causes different effects depending on the dose and type of radiation and physicochemical properties of the material. In the medical field, understanding the effect of radiation on a variety of materials including pharmaceuticals, medical devices, polymers as biomaterials, and packaging is crucial. Although there are many kinds of sterilization methods, the use of radiation in sterilization has many advantages such as being a substantially less toxic, safer terminal sterilization method. Radiosterilization is sterilization with an ionizing radiation such as gamma rays or electron beam (e-beam), the latter being a newer but less-frequently used technique. However, the need for large facilities with proper radiation protections for personnel and the environment from the effects of radiation and radioactive wastes makes this procedure highly costly. The effects of radiation on materials, especially pharmaceuticals and polymer-containing medical devices, cause degradation or chemical changes. The effects of radiation on a variety of different materials is a growing research area that can create safer techniques that reduce radiation damage and increase cost-effectiveness in the future. LAY ABSTRACT Radiation can be used for positive purposes such as medical applications and the sterilization of pharmaceutical products, medical devices, and food and agricultural products as well as clinical applications such as diagnosis and/or therapy of a variety of diseases. The dose rate, time, type and emitted energy of the radiation are critical issues for determining its benefit/damage ratio. The sterilization of pharmaceuticals and medical devices that contain polymers can be achieved safely and effectively by irradiation. The sterilization of materials at the terminal phase-that is, in its final packaging materials-and its suitability to a variety of different kinds of packaging materials have brought additional value to radiosterilization. However, radiation sterilization is more expensive than the other sterilization methods that require large facilities. Although this method is safe in application, the effects of radiation on drugs and polymers must be evaluated by various analytical methods. In the nuclear chemistry and radiochemistry field, more effective and novel methods are being developed to decrease the harmful effects of radiation on materials.
Collapse
Affiliation(s)
- Mine Silindir
- Department of Radiopharmacy, Faculty of Pharmacy, Hacettepe University, Ankara, Turkey
| | | |
Collapse
|
34
|
Son TI, Sakuragi M, Takahashi S, Obuse S, Kang J, Fujishiro M, Matsushita H, Gong J, Shimizu S, Tajima Y, Yoshida Y, Suzuki K, Yamamoto T, Nakamura M, Ito Y. Visible light-induced crosslinkable gelatin. Acta Biomater 2010; 6:4005-10. [PMID: 20580950 DOI: 10.1016/j.actbio.2010.05.018] [Citation(s) in RCA: 58] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2009] [Revised: 05/14/2010] [Accepted: 05/19/2010] [Indexed: 11/17/2022]
Abstract
A novel visible light-crosslinkable porcine gelatin was prepared for gelation and micropatterning. The preparation employed a photo-oxidation-induced crosslinking mechanism. First, furfuryl groups were incorporated into the gelatin. Second, the modified gelatin was mixed in water with Rose Bengal, which is a visible light sensitizer. Irradiation by visible light solidified the aqueous solution. In addition, when the solution was cast on a plate, dried and photo-irradiated in the presence of a photomask a micropattern was formed that matched the micropattern on the photomask. The gelatin-immobilized regions enhanced cell adhesion. It was also confirmed that the gelatin incorporating furfuryl and Rose Bengal have no significant toxicity. The photo-crosslinkable gelatin was employed as a direct pulp capping material in the dental field. Considering these results, this system could be useful as a new type of visible light-induced crosslinkable biosealant.
Collapse
Affiliation(s)
- Tae Il Son
- RIKEN Advanced Science Institute, Wako-shi, Saitama, Japan
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Collapse
|
35
|
Abstract
A conductive and photocatalytic nanocomposite thin film comprising multiwalled carbon nanotubes (MWCNTs) and TiO2 nanoparticles is fabricated based on layer-by-layer (LbL) assembly in a nonpolar solvent, toluene. An amphiphilic surfactant, aerosol OT (AOT), is used to impart opposite surface charge onto MWCNTs and TiO2 in toluene. Our fabrication technique enables the incorporation of unoxidized MWCNTs into the nanocomposite thin films, and at the same time, provides a versatile method of fabricating conformal thin films over a large area. The physicochemical properties of MWCNT/TiO2 nanocomposite thin films, including composition and photocatalytic activity, can be varied by changing the concentration of AOT during assembly. The electrical properties of the nanocomposite film, specifically its sheet resistance and conductivity, can also be tuned through changing the assembly conditions. In addition, we demonstrate that the incorporation of MWCNTs within our films leads to a significant enhancement of the photocatalytic activity of TiO2. The conductivity and enhanced photocatalytic activity of MWCNT/TiO2 thin films make them promising for the generation of highly efficient dye-sensitized solar cells (DSSCs).
Collapse
Affiliation(s)
- Kwadwo E Tettey
- Department of Chemical and Biomolecular Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, USA
| | | | | |
Collapse
|
36
|
Eloi MTA, Santos JL, Morais PC, Bakuzis AF. Field-induced columnar transition of biocompatible magnetic colloids: An aging study by magnetotransmissivity. Phys Rev E Stat Nonlin Soft Matter Phys 2010; 82:021407. [PMID: 20866809 DOI: 10.1103/physreve.82.021407] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/29/2009] [Revised: 01/05/2010] [Indexed: 05/29/2023]
Abstract
The field dependence of the optical transmission of tartrate-coated and polyaspartate-coated magnetite-based aqueous colloids was studied. The colloidal stock samples were diluted to prepare a series of samples containing different particle volume fractions ranging from 0.17% up to 1.52% and measured at distinct times after preparation (1, 30, 120, 240, and 1460 days). We show that the magneto-transmissivity behavior is mainly described by the rotation of linear chains, at the low-field range, whereas the analysis of the data provided the measurement of the average chain length. Results also reveal that the optical transmissivity has a minimum at a particular critical field, whose origin is related to the onset of columns of chains built from isolated particle chains, i.e., due to a columnar phase transition. We found the critical field reducing as the particle volume fraction increases and as the sample's aging time increases. To investigate the origin of this phenomenon we used phase condensation models and Mie's theory applied to a chain of spheres and to an infinite cylinder. Possible implications for magnetophotonic colloidal-based devices and biomedical applications were discussed.
Collapse
Affiliation(s)
- M T A Eloi
- Instituto de Física, Universidade de Brasília, DF, Brazil
| | | | | | | |
Collapse
|
37
|
Vukomanović M, Mitrić M, Skapin SD, Zagar E, Plavec J, Ignjatović N, Uskoković D. Influence of ultrasonic processing on the macromolecular properties of poly (D,L-lactide-co-glycolide) alone and in its biocomposite with hydroxyapatite. Ultrason Sonochem 2010; 17:902-908. [PMID: 20163978 DOI: 10.1016/j.ultsonch.2010.01.007] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/26/2009] [Revised: 01/19/2010] [Accepted: 01/19/2010] [Indexed: 05/28/2023]
Abstract
In this work poly(D,L-lactide-co-glycolide) (PLGA) and a poly(d,l-lactide-co-glycolide)/hydroxyapatite (PLGA/HAp) composite processed in an ultrasonic field at higher (25 degrees C) and lower (8 degrees C) temperatures were studied with respect to the molecular properties of the obtained materials. The processing of the PLGA and the PLGA/HAp composite in an ultrasonic field resulted in a change of molar mass averages of the polymer/polymeric part of these materials, while an amorphous structure and a 50:50 lactide-to-glycolide co-monomer ratio were preserved without the formation of crystalline oligomers. However, mobility of polymeric chains obtained after ultrasonic processing was lower indicating ordering the structure of polymeric chains as a result of processing. Additionally, it was observed that the mobility of the PLGA macromolecules was lower within the composite in comparison with the mobility of the chains within the PLGA alone in the case when both were obtained after ultrasonic processing. This was a consequence of the structure formation through the interactions between the PLGA and the HAp. Based on these results different degradation rate of PLGA in composite can be expected, which is important in the application of this material for the controlled drug delivery of medicaments.
Collapse
Affiliation(s)
- Marija Vukomanović
- Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Knez Mihailova 35/IV, 11000 Belgrade, Serbia.
| | | | | | | | | | | | | |
Collapse
|
38
|
Kumar A, Banerjee S, Saikia JP, Konwar BK. Swift heavy ion irradiation induced enhancement in the antioxidant activity and biocompatibility of polyaniline nanofibers. Nanotechnology 2010; 21:175102. [PMID: 20357408 DOI: 10.1088/0957-4484/21/17/175102] [Citation(s) in RCA: 13] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/29/2023]
Abstract
Polyaniline (PAni) nanofibers doped with HCl and CSA have been irradiated with 90 MeV O(7+) ions with fluence of 3 x 10(10), 3 x 10(11) and 1 x 10(12) ions cm(-2). TEM micrographs show a decrease in the fiber diameter with increasing irradiation fluence, which has been explained on the basis of the Coulomb explosion model. XRD analysis reveals a decrease in the crystalline domain length and an increase in the strain. The increase in d-spacing for the (100) reflection with increasing irradiation fluence is ascribed to the increase in the tilt angle of the polymer chain, which is also evident from micro-Raman spectra. UV-vis spectra of the PAni nanofibers exhibit blue-shift in the absorption bands attributed to pi-pi* band transitions indicating a reduction in particle size after SHI irradiation; as also observed in TEM micrographs. Micro-Raman spectra also reveal a transition from the benzenoid to quinoid structures in the PAni chain as the fluence is increased. Although the quinoid unit has no hydrogen for DPPH scavenging, the antioxidant activity of PAni nanofibers is found to increase with increasing fluence. This has been attributed to the availability of more reaction sites as a result of fragmentation of the PAni nanofibers which compensates for the benzenoid to quinoid transition after irradiation. The biocompatibility of the PAni nanofibers is also found to increase with increasing irradiation fluence, indicating the possibility of employing swift heavy ion irradiation as an effective technique in order to modify conducting polymer nanostructures for biomedical applications.
Collapse
Affiliation(s)
- A Kumar
- Department of Physics, Tezpur University, Tezpur, Assam, India.
| | | | | | | |
Collapse
|
39
|
Oliveira P, Ribeiro DA, Pipi EF, Driusso P, Parizotto NA, Renno ACM. Low level laser therapy does not modulate the outcomes of a highly bioactive glass-ceramic (Biosilicate) on bone consolidation in rats. J Mater Sci Mater Med 2010; 21:1379-1384. [PMID: 19943088 DOI: 10.1007/s10856-009-3945-4] [Citation(s) in RCA: 14] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/29/2009] [Accepted: 11/12/2009] [Indexed: 05/28/2023]
Abstract
The main purpose of the present work was to evaluate if low level laser therapy (LLLT) can improve the effects of novel fully-crystallized glass-ceramic (Biosilicate) on bone consolidation in tibial defects of rats. Forty male Wistar rats with tibial bone defects were used. Animals were divided into four groups: group bone defect control (CG); group bone defect filled with Biosilicate (BG); group bone defect filled with Biosilicate, irradiated with LLLT, at 60 J cm(-2) (BG 60) and group bone defect filled with Biosilicate, irradiated with LLLT, at 120 J cm(-2) (BG 120). A low-energy GaAlAs 830 nm, CW, 0.6 mm beam diameter, 100 W cm(-2), 60 and 120 J cm(-2) was used in this study. Laser irradiation was initiated immediately after the surgery procedure and it was performed every 48 h for 14 days. Fourteen days post-surgery, the three-point bending test revealed that the structural stiffness of the groups CG and BG was higher than the values of the groups BG60 and BG120. Morphometric analysis revealed no differences between the control group and the Biosilcate group. Interestingly, the groups treated with Biosilicate and laser (BG 60 and BG120) showed statistically significant lower values of newly formed bone in the area of the defect when compared to negative control (CG) and bone defect group filled with Biosilicate (CB). Our findings suggest that although Biosilicate exerts some osteogenic activity during bone repair, laser therapy is not able to modulate this process.
Collapse
Affiliation(s)
- Poliani Oliveira
- Department of Physiotherapy, Federal University of São Carlos, São Carlos, SP, Brazil
| | | | | | | | | | | |
Collapse
|
40
|
Briganti E, Al Kayal T, Kull S, Losi P, Spiller D, Tonlorenzi S, Berti D, Soldani G. The effect of gamma irradiation on physical-mechanical properties and cytotoxicity of polyurethane-polydimethylsiloxane microfibrillar vascular grafts. J Mater Sci Mater Med 2010; 21:1311-1319. [PMID: 20091101 DOI: 10.1007/s10856-009-3943-6] [Citation(s) in RCA: 9] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/28/2009] [Accepted: 11/06/2009] [Indexed: 05/28/2023]
Abstract
Poly(ether) urethane (PEtU)-polydimethylsiloxane (PDMS) based materials have been processed by a spray, phase-inversion technique to produce microfibrillar small-diameter vascular grafts; however the effect of sterilization upon these grafts is still unknown. This study investigated the effect of gamma irradiation on grafts made of PEtU-PDMS materials containing different PDMS concentrations. Sterilisation-induced changes in surface chemical structure and morphology were assessed by infrared spectroscopy, light and scanning electron microscopy. Tensile tests were used to examine changes in mechanical properties and the cytotoxicity evaluation was performed on L929 fibroblasts. The study demonstrated that physical-chemical and mechanical properties of PEtU-PDMS grafts, at each PDMS concentration, were not significantly affected by the exposure to gamma irradiation, moreover no sign of cytotoxicity was observed after sterilisation. Although in vitro experiments have been promising, further in vivo studies are necessary to evaluate the biodegradation behaviour of PEtU-PDMS graft after gamma irradiation, before any clinical application.
Collapse
Affiliation(s)
- Enrica Briganti
- Laboratory for Biomaterials and Graft Technology, Institute of Clinical Physiology-CNR, G. Pasquinucci Hospital, Massa, Italy.
| | | | | | | | | | | | | | | |
Collapse
|
41
|
Pashkuleva I, Marques AP, Vaz F, Reis RL. Surface modification of starch based biomaterials by oxygen plasma or UV-irradiation. J Mater Sci Mater Med 2010; 21:21-32. [PMID: 19639265 DOI: 10.1007/s10856-009-3831-0] [Citation(s) in RCA: 21] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/06/2008] [Accepted: 07/16/2009] [Indexed: 05/28/2023]
Abstract
Radiation is widely used in biomaterials science for surface modification and sterilization. Herein, we describe the use of plasma and UV-irradiation to improve the biocompatibility of different starch-based blends in terms of cell adhesion and proliferation. Physical and chemical changes, introduced by the used methods, were evaluated by complementary techniques for surface analysis such as scanning electron microscopy, atomic force microscopy, contact angle analysis and X-ray photoelectron spectroscopy. The effect of the changed surface properties on the adhesion of osteoblast-like cells was studied by a direct contact assay. Generally, both treatments resulted in higher number of cells adhered to the modified surfaces. The importance of the improved biocompatibility resulting from the irradiation methods is further supported by the knowledge that both UV and plasma treatments can be used as cost-effective methods for sterilization of biomedical materials and devices.
Collapse
Affiliation(s)
- Iva Pashkuleva
- 3B's Research Group-Biomaterials, Biodegradables and Biomimetics, University of Minho, AvePark, Taipas, Guimarães, Portugal.
| | | | | | | |
Collapse
|
42
|
Gutman Grinbank S, Soba A, Gonzalez GA, Diaz Constanzo G, Bogo HA, Marshall G. Simulations of transport regime in electrodeposition in different viscosity scenarios. Annu Int Conf IEEE Eng Med Biol Soc 2010; 2010:3241-3244. [PMID: 21096816 DOI: 10.1109/iembs.2010.5627407] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/30/2023]
Abstract
In this work we study the effects of viscosity variations in thin-layer electrochemical deposition (ECD) under galvanostatic conditions through experimental measurements and theoretical modeling. The theoretical model, written in terms of dimensionless quantities, describes diffusive, migratory and convective ion transport in a fluid under galvanostatic conditions. Experiments reveal that as viscosity increases, convection decreases when the cell resistance remains constant. Our numerical model predicts that as viscosity increases, electroconvection becomes less relevant and concentration and convective fronts slow down. The time scaling of this phenomenon is studied and compared to previously reported low viscosity solution studies.
Collapse
|
43
|
Hori N, Ueno T, Suzuki T, Yamada M, Att W, Okada S, Ohno A, Aita H, Kimoto K, Ogawa T. Ultraviolet light treatment for the restoration of age-related degradation of titanium bioactivity. Int J Oral Maxillofac Implants 2010; 25:49-62. [PMID: 20209187] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Grants] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/28/2023] Open
Abstract
PURPOSE To examine the bioactivity of differently aged titanium (Ti) disks and to determine whether ultraviolet (UV) light treatment reverses the possible adverse effects of Ti aging. MATERIALS AND METHODS Ti disks with three different surface topographies were prepared: machined, acid-etched, and sandblasted. The disks were divided into three groups: disks tested for biologic capacity immediately after processing (fresh surfaces), disks stored under dark ambient conditions for 4 weeks, and disks stored for 4 weeks and treated with UV light. The protein adsorption capacity of Ti was examined using albumin and fibronectin. Cell attraction to Ti was evaluated by examining migration, attachment, and spreading behaviors of human osteoblasts on Ti disks. Osteoblast differentiation was evaluated by examining alkaline phosphatase activity, the expression of bone-related genes, and mineralized nodule area in the culture. RESULTS Four-week-old Ti disks showed = or < 50% protein adsorption after 6 hours of incubation compared with fresh disks, regardless of surface topography. Total protein adsorption for 4-week-old surfaces did not reach the level of fresh surfaces, even after 24 hours of incubation. Fifty percent fewer human osteoblasts migrated and attached to 4-week-old surfaces compared with fresh surfaces. Alkaline phosphatase activity, gene expression, and mineralized nodule area were substantially reduced on the 4-week-old surfaces. The reduction of these biologic parameters was associated with the conversion of Ti disks from superhydrophilicity to hydrophobicity during storage for 4 weeks. UV-treated 4-week-old disks showed even higher protein adsorption, osteoblast migration, attachment, differentiation, and mineralization than fresh surfaces, and were associated with regenerated superhydrophilicity. CONCLUSIONS Time-related degradation of Ti bioactivity is substantial and impairs the recruitment and function of human osteoblasts as compared to freshly prepared Ti surfaces, suggesting a "biologic aging"-like change of Ti. UV treatment of aged Ti, however, restores and even enhances bioactivity, exceeding its innate levels.
Collapse
Affiliation(s)
- Norio Hori
- The Jane and Jerry Weintraub Center for Reconstructive Biotechnology, UCLA School of Dentistry, Los Angeles, CA, USA
| | | | | | | | | | | | | | | | | | | |
Collapse
|
44
|
Abstract
Responsive polymer systems that react to thermal and light stimuli have been a focus in the biomaterials literature because they have the potential to be less invasive than currently available materials and may perform well in the in vivo environment. Natural and synthetic polymer systems created to exhibit a temperature-sensitive phase transition lead to in situ forming hydrogels that can be degradable or non-degradable. These systems typically yield physical gels whose properties can be manipulated to accommodate specific applications while requiring no additional solvents or cross-linkers. Photo-responsive isomerization, dimerization, degradation, and triggered processes that are reversible and irreversible may be used to create unique gel, micelle, liposome, and surface-modified polymer systems. Unique wavelengths induce photo-chemical reactions of polymer-bound chromophores to alter the bulk properties of polymer systems. The properties of both thermo- and photo-responsive polymer systems may be taken advantage of to control drug delivery, protein binding, and tissue scaffold architectures. Systems that respond to both thermo- and photo-stimuli will also be discussed because their multi-responsive properties hold the potential to create unique biomaterials.
Collapse
Affiliation(s)
- Laura A Wells
- Department of Chemical Engineering, McMaster University, Hamilton, Ontario, Canada
| | | | | | | |
Collapse
|
45
|
Zhao Y, Wei M, Lu J, Wang ZL, Duan X. Biotemplated hierarchical nanostructure of layered double hydroxides with improved photocatalysis performance. ACS Nano 2009; 3:4009-16. [PMID: 19928881 DOI: 10.1021/nn901055d] [Citation(s) in RCA: 102] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
We report a biomorphic hierarchical mixed metal oxide (MMO) framework through a biotemplated synthesis method. A uniform Al(2)O(3) coating was deposited on the surface of the biotemplate with an atomic layer deposition (ALD) process, and the film of ZnAl-layered double hydroxide (ZnAl-LDH), which faithfully inherits the surface structure of the biotemplate, was prepared by an in situ growth technique. Subsequently, a polycrystal ZnAl-MMO framework obtained by calcination of the LDH precursor has been demonstrated as an effective and recyclable photocatalyst for the decomposition of dyes in water, owing to its rather high specific surface area and hierarchical distribution of pore size. Therefore, the new strategy reported in this work can be used to fabricate a variety of biomorphic LDHs as well as MMO frameworks through replication of complicated and hierarchical biological structures for the purpose of catalysis, adsorbents, and other potential applications.
Collapse
Affiliation(s)
- Yufei Zhao
- Beijing University of Chemical Technology, Beijing 100029, People's Republic of China
| | | | | | | | | |
Collapse
|
46
|
Volodkin DV, Madaboosi N, Blacklock J, Skirtach AG, Möhwald H. Surface-supported multilayers decorated with bio-active material aimed at light-triggered drug delivery. Langmuir 2009; 25:14037-14043. [PMID: 19670892 DOI: 10.1021/la9015433] [Citation(s) in RCA: 54] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
In this work, we report on the functionalization of layer-by-layer films with gold nanoparticles, microcapsules, and DNA molecules by spontaneous incorporation into the film. Exponentially growing films from biopolymers, namely, hyaluronic acid (HA) and poly-L-lysine (PLL), and linearly growing films from the synthetic polymers, namely, poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH), were examined for the embedding. The studied (PLL/HA)(24)/PLL and (PAH/PSS)(24)/PAH films are later named HA/PLL and PSS/PAH films, respectively. The HA/PLL film has been found to be more efficient for both particle and DNA embedding than PSS/PAH because of spontaneous PLL transport from the interior of the whole HA/PLL film to the surface in order to make additional contact with embedded particles or DNA. DNA and nanoparticles can be immobilized in HA/PLL films, reaching loading capacities of 1.5 and 100 microg/cm(2), respectively. The capacities of PSS/PAH films are 5 and 12 times lower than that for films made from biopolymers. Polyelectrolyte microcapsules adsorb irreversibly on the HA/PLL film surface as single particles whereas very poor interaction was observed for PSS/PAH. This intrinsic property of the HA/PLL film is due to the high mobility of PLL within the film whereas the structure of the PSS/PAH film is "frozen in". Gold nanoparticles and DNA form micrometer-sized aggregates or patches on the HA/PLL film surface. The diffusion of nanoparticles and DNA into the HA/PLL film is restricted at room temperature, but DNA diffusion is triggered by heating to 70 degrees C, leading to homogeneous filling of the film with DNA. The film has not only a high loading capacity but also can be activated by "biofriendly" near-infrared (IR) laser light, thanks to the gold nanoparticle aggregates on the film surface. Composite HA/PLL films with embedded gold nanoparticles and DNA can be activated by light, resulting in DNA release. We assume that the mechanism of the release is dependent on the disturbance in bonding between "doping" PLL and DNA, which is induced by local thermal decomposition of the HA/PLL network in the film when the film is exposed to IR light. Remote IR-light activation of dextran-filled microcapsules modified by gold nanoparticles and integrated into the HA/PLL film is also demonstrated, revealing an alternative release pathway using immobilized light-sensitive carriers (microcapsules).
Collapse
Affiliation(s)
- D V Volodkin
- Max-Planck Institute of Colloids and Interfaces, Research Campus Golm, Potsdam, D-14424 Germany.
| | | | | | | | | |
Collapse
|
47
|
Chen B, Ma XL. [The effect of ultraviolet irradiation on the biocompatibility of Medpor]. Zhonghua Zheng Xing Wai Ke Za Zhi 2009; 25:443-446. [PMID: 20209937] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 05/28/2023]
Abstract
OBJECTIVE To investigate the effect of ultraviolet ( UV) irradiation on the biocompatibility of Medpor. METHODS The Medpor implant, 2 mm in thickness, was divided into several pieces with the size of 1 cm x 1 cm. 12 Japanese big ear rabbits were divided into experimental (n=6) and control group (n=6). The 1 cm x 1 cm auricular cartilage defects were made in each rabbit ear. Then the defects were repaired with UV-treated Medpor implants in experimental group, and Medpor implants in control group. The levels of the total hemolytic complement (CH50) were measured 3 d hefore operation, and 1, 3, 7, 14, 21, 30, 60, 90 d after operation. The wound healing was observed. 90 d after operation, the animals were killed to get the specimens for gross observation and histologic examination. The change of CH50 level after operation was significantly different between the two groups ( P < 0.05) . The CH50 level was comparatively stable in experimental group. Compared with control group, the local inflammatory reaction was not obvious in experimental group. A great amount of tissue, including big vessels was growing into the mini-pores of Medpor, resulting a close combination between the implant and surrounding tissue. CONCLUSION It suggests that ultraviolet irradiation can improve the biocompatibility of Medpor and promote the wound recovery.
Collapse
Affiliation(s)
- Bo Chen
- The Otolaryngology of Shengjing Hospital of China Medical University, Shenyang 110004, China
| | | |
Collapse
|
48
|
Chung CK, Chang HC, Shih TR, Lin SL, Hsiao EJ, Chen YS, Chang EC, Chen CC, Lin CC. Water-assisted CO(2) laser ablated glass and modified thermal bonding for capillary-driven bio-fluidic application. Biomed Microdevices 2009. [PMID: 19830566 DOI: 10.1007/s10544‐009‐9365‐x] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
The glass-based microfluidic chip has widely been applied to the lab-on-a-chip for clotting tests. Here, we have demonstrated a capillary driven flow chip using the water-assisted CO(2) laser ablation for crackless fluidic channels and holes as well as the modified low-temperature glass bonding with assistance of adhesive polymer film at 300 degrees Celsius. Effect of water depth on the laser ablation of glass quality was investigated. The surface hydrophilic property of glass and polymer film was measured by static contact angle method for hydrophilicity examination in comparison with the conventional polydimethylsiloxane (PDMS) material. Both low-viscosity deionized water and high-viscosity whole blood were used for testing the capillary-driving flow behavior. The preliminary coagulation testing in the Y-channel chip was also performed using whole blood and CaCl(2) solution. The water-assisted CO(2) laser processing can cool down glass during ablation for less temperature gradient to eliminate the crack. The modified glass bonding can simplify the conventional complex fabrication procedure of glass chips, such as high-temperature bonding, long consuming time and high cost. Moreover, the developed fluidic glass chip has the merit of hydrophilic behavior conquering the problem of traditional hydrophobic recovery of polymer fluidic chips and shows the ability to drive high-viscosity bio-fluids.
Collapse
Affiliation(s)
- C K Chung
- Department of Mechanical Engineering, Center for Micro/Nano Science and Technology, National Cheng Kung University, Tainan, Taiwan.
| | | | | | | | | | | | | | | | | |
Collapse
|
49
|
Wu G, Paz MD, Chiussi S, Serra J, González P, Wang YJ, Leon B. Excimer laser chemical ammonia patterning on PET film. J Mater Sci Mater Med 2009; 20:597-606. [PMID: 18853239 DOI: 10.1007/s10856-008-3600-5] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/29/2007] [Accepted: 09/23/2008] [Indexed: 05/26/2023]
Abstract
Laser is a promising technique used for biopolymer surface modification with micro and/or nano features. In this work, a 193 nm excimer laser was used for poly (ethylene terephthalate) (PET) surfaces chemical patterning. The ablation threshold of the PET film used in the experiments was 62 mJ/cm(2) measured before surface modification. Surface chemical patterning was performed by irradiating PET film in a vacuum chamber filled with ammonia at the flux of 10, 15, 20, 25 ml/min. Roughness of the surface characterized by profilometry showed that there were no significant observed change after modification comparing original film. But the hydrophilicity of the surface increased after patterning and a minimum water contact angle was obtained at the gas flux of 20 ml/min. FT-IR/ATR results showed the distinct amino absorption bands presented at 3352 cm(-1)and 1613 cm(-1) after modification and XPS binding energies of C(1s) at 285.5 eV and N(1s) at 399.0 eV verified the existence of C-N bond formation on the PET film surface. Tof-SIMS ions mapping used to identify the amine containing fragments corroborates that amino grafting mainly happened inside the laser irradiation area of the PET surface. A hypothesized radical reaction mechanism proposes that the collision between radicals in ammonia and on the PET surface caused by the incident laser provokes the grafting of amino groups.
Collapse
Affiliation(s)
- G Wu
- Department of Applied Physics, University of Vigo, Rua Maxwell, Vigo, Spain.
| | | | | | | | | | | | | |
Collapse
|
50
|
Abstract
Lead has recently been recognised as a source of environmental pollution, including the lead used for radiation shielding in radiotherapy. The bremsstrahlung radiation caused by the interaction between the electron beam and lead may reduce the accuracy of radiotherapy. To avoid the use of lead, a new material composed of tungsten and hydrogenated styrene-butadiene-styrene copolymer is studied with the Monte Carlo (MC) method and experiment in this paper. The component of the material is chosen after simulation with the MC method and the practical measurement is taken to validate the shielding ability of the material. The result shows that the shielding ability of the new material is good enough to fulfill the requirement for application in radiotherapy. Compared with lead alloy, the present new material is so flexible that can be easily customized into arbitrary shapes. Moreover, the material is environmentally friendly and can be recycled conveniently. Therefore, the material can be used as an effective lead substitute for shielding against electron beams in radiotherapy.
Collapse
Affiliation(s)
- Kun Yue
- Shanghai Applied Radiation Institute, Shanghai University, Shanghai 200444, China
| | | | | | | | | | | | | |
Collapse
|