Janus Polyurethane Adhesive Patch with Antibacterial Properties for Wound Healing

Despite the rapid development of tissue adhesives, flaws including allergies, poor stability, and indiscriminate double-sided adhesive properties limit their application in the medical field. In this work, Janus polyurethane patches were spontaneously prepared by adjusting the difference in the functional group distribution between the top and bottom sides of the patch during emulsion drying. Consequently, poor adhesion was exhibited on the bottom surface, while the top surface can easily adhere to metals, polymers, glasses, and tissues. The difference in adhesive strength to pork skin between the two surfaces is more than 5 times. The quaternary ammonium salt and hydrophilic components on the surface of the polyurethane patch enable the rapid removal and absorption of water from the tissue surface to achieve wet adhesion. Animal experiments have demonstrated that this multifunctional Janus polyurethane patch can promote skin wound closure and healing of infected wounds. This facile and effective strategy to construct Janus polyurethane patch provides a promising method for the development of functional tissue-adhesives.

Osteogenic Differentiation Capacity of Dental Pulp Stem Cells on 3D Printed Polyurethane/Boric Acid Scaffold

Additive manufacturing is growing in the area of dentistry and orthopedics due to the potential for the fabrication of individual implants. In this study, fused deposition modeling which is the most popular method was used to produce 3D scaffolds having a grid pattern from the polyurethane (PU) filament. Then, this scaffold was coated with boric acid (BA) with the thermionic vacuum arc technique. The microstructure analysis showed the macro-pores having a dimension of ~ 0.16 mm2. The BA coating increased the roughness in adverse decreased the wettability. The presence of BA on the scaffold before and after cell culture was confirmed by FESEM-EDS and ATR-FTIR. The Cell proliferation and osteogenic differentiation capacity of dental pulp stem cells (DPSCs) on uncoated and coated printed 3D PU scaffolds were also investigated. On the third day, cell viability was found to be higher (1.3-fold) in the groups containing BA. However, on the seventh day, the increase in cell proliferation in the PU+BA group was found to be less than in the other groups. According to Ca deposition analysis and Alizarin Red staining, PU+BA increased the calcium accumulation in the cells in both osteogenic induced and non-induced conditions at day 14. According to gene expression analysis, the Runx2 expression was not detected in PU+BA groups with and without differentiation medium (p ≤0.05). The expression of OCN was persistently increased up to 21-fold and 48-fold in cells on PU and PU+BA in osteogenic differentiation medium group after 14 days compared to control group (p ≤0.05). DSPP expression was observed only in PU+BA in osteogenic differentiation medium group. In line with the results that we have obtained, our 3D printed scaffolds have properties to trigger the differentiation of DPSCs cells in terms of osteogenicity.

Amphiphilic nanofibrillated cellulose/polyurethane composites with antibacterial, antifouling and self-healing properties for potential catheter applications

This study focuses on enhancing interventional medical devices, specifically catheters, using a novel composite material. Challenges like corrosion and contamination in vivo, often caused by body fluids' pH, bacteria, and proteins, lead to mechanical damage, bacterial colonization, and biofilm formation on devices like catheters. The objective of this study was to prepare a versatile composite (HFs) by designing polyurethanes (HPU) with an ionic chain extender (HIID) and blending them with amphiphilic nanofibrillated cellulose (Am-CNF). The composite leverages dynamic interactions such as hydrogen bonding and electrostatic forces, as evidenced by Molecular Mechanics (MM) calculations. The H4F0.75 composite exhibited exceptional properties: 99 % length recovery post 600 stretching cycles at 100 % strain, rapid self-healing in artificial urine, high bactericidal activity, and excellent cell viability. Moreover, mechanical aging tests and UV-vis spectral analysis confirmed the material's durability and safety. These findings suggest that the HFs composite holds significant promise for improving catheters' performance in medical applications.

Conducting biointerface of spider-net-like chitosan-adorned polyurethane/SPIONs@SrO2-fMWCNTs for bone tissue engineering and antibacterial efficacy

In pursuit of enhancing bone cell proliferation, this study delves into the fabrication of porous scaffolds through the integration of nanomaterials. Specifically, we present the development of highly conductive chitosan (CS) nanonets on fibro-porous polyurethane (PU) bio-membranes. These nanofibers comprise functionalized multiwall carbon nanotubes (fMWCNTs), well-dispersed superparamagnetic iron oxide (SPIONs), and strontium oxide (SrO2) nanoparticles. The resulting porous scaffold exhibits remarkable interfacial biocompatibility, antibacterial properties, and load-bearing capability. Through meticulous in vitro investigations, the CS-PU/SPIONs/SrO2-fMWCNTs nanofibrous scaffolds have demonstrated a propensity to promote bone cell regeneration. Notably, the integration of these nanomaterials has been found to upregulate crucial bone-related markers, including ALP, ARS, COL-I, RUNX2, and SPP-I. The evaluation of these markers, conducted through quantitative real-time polymerase chain reaction (qRT-PCR) and immunocytochemistry, substantiates the improved cell survival and enhanced osteogenic differentiation facilitated by the integrated nanomaterials. This comprehensive analysis underscores the efficacy of CS-PU/SPIONs/SrO2-fMWCNTs bioscaffolds in promoting MC3T3-E1 cell regeneration within, thereby holding promise for advancements in bone tissue engineering and regenerative medicine.

Flexible and Biocompatible Antifouling Polyurethane Surfaces Incorporating Tethered Antimicrobial Peptides through Click Reactions

Efficient, simple antibacterial materials to combat implant-associated infections are much in demand. Herein, the development of polyurethanes, both cross-linked thermoset and flexible and versatile thermoplastic, suitable for "click on demand" attachment of antibacterial compounds enabled via incorporation of an alkyne-containing diol monomer in the polymer backbone, is described. By employing different polyolic polytetrahydrofurans, isocyanates, and chain extenders, a robust and flexible material comparable to commercial thermoplastic polyurethane is prepared. A series of short synthetic antimicrobial peptides are designed, synthesized, and covalently attached in a single coupling step to generate a homogenous coating. The lead material is shown to be biocompatible and does not display any toxicity against either mouse fibroblasts or reconstructed human epidermis according to ISO and OECD guidelines. The repelling performance of the peptide-coated materials is illustrated against colonization and biofilm formation by Staphylococcus aureus and Staphylococcus epidermidis on coated plastic films and finally, on coated commercial central venous catheters employing LIVE/DEAD staining, confocal laser scanning microscopy, and bacterial counts. This study presents the successful development of a versatile and scalable polyurethane with the potential for use in the medical field to reduce the impact of bacterial biofilms.

Design of 3D-Photoprintable, Bio-, and Hemocompatible Nonisocyanate Polyurethane Elastomers for Biomedical Implants

Polyurethanes (PUs) have adjustable mechanical properties, making them suitable for a wide range of applications, including in the biomedical field. Historically, these PUs have been synthesized from isocyanates, which are toxic compounds to handle. This has encouraged the search for safer and more environmentally friendly synthetic routes, leading today to the production of nonisocyanate polyurethanes (NIPUs). Among these NIPUs, polyhydroxyurethanes (PHUs) bear additional hydroxyl groups, which are particularly attractive for derivatizing and adjusting their physicochemical properties. In this paper, polyether-based NIPU elastomers with variable stiffness are designed by functionalizing the hydroxyl groups of a poly(propylene glycol)-PHU by a cyclic carbonate carrying a pendant unsaturation, enabling them to be post-photo-cross-linked with polythiols (thiol-ene). Elastomers with remarkable mechanical properties whose stiffness can be adjusted are obtained. Thanks to the unique viscous properties of these PHU derivatives and their short gel times observed by rheology experiments, formulations for light-based three-dimensional (3D) printing have been developed. Objects were 3D-printed by digital light processing with a resolution down to the micrometer scale, demonstrating their ability to target various designs of prime importance for personalized medicine. In vitro biocompatibility tests have confirmed the noncytotoxicity of these materials for human fibroblasts. In vitro hemocompatibility tests have revealed that they do not induce hemolytic effects, they do not increase platelet adhesion, nor activate coagulation, demonstrating their potential for future applications in the cardiovascular field.

A polyurethane-based hydrophilic elastomer with multi-biological functions for small-diameter vascular grafts

Thrombosis and intimal hyperplasia (IH) are two major problems faced by the small-diameter vascular grafts. Mimicking the native endothelium and physiological elasticity of blood vessels is considered an ideal strategy. Polyurethane (PU) is suitable for vascular grafts in mechanics because of its molecular designability and elasticity; however, it generally lacks the endothelium-like biofunctions and hydrophilicity. To solve this contradiction, a hydrophilic PU elastomer is developed by crosslinking the hydrophobic hard-segment chains containing diselenide with diaminopyrimidine-capped polyethylene glycol (PEG). In this network, the hydrophobic aggregation occurs underwater due to the uninterrupted hard-segment chains, leading to a significant self-enhancement in mechanics, which can be tailored to the elasticity similar to natural vessels by adjusting the crosslinking density. A series of in vitro studies confirm that the hydrophilicity of PEG and biological activities of aminopyrimidine and diselenide give the PU multi-biological functions similar to the native endothelium, including stable catalytic release of nitric oxide (NO) in the physiological level; anti-adhesion and anti-activation of platelets; inhibition of migration, adhesion, and proliferation of smooth muscle cells (SMCs); and antibacterial effect. In vivo studies further prove the good histocompatibility with both significant reduction in immune response and calcium deposition. STATEMENT OF SIGNIFICANCE: Constructing small-diameter vascular grafts similar to the natural vessels is considered an ideal method to solve the restenosis caused by thrombosis and intimal hyperplasia (IH). Because of the long-term stability, bulk modification is more suitable for implanted materials, however, how to achieve the biofunctions, hydrophilicity, and elasticity simultaneously is still a big challenge. In this work, a kind of polyurethane-based elastomer has been designed and prepared by crosslinking the functional long hard-segment chains with PEG soft segments. The underwater elasticity based on hydration-induced stiffening and the multi-biological functions similar to the native endothelium are compatible with natural vessels. Both in vitro and in vivo experiments demonstrate the potential of this PU as small-diameter vascular grafts.

In Vitro and In Vivo Assessment of the Infection Resistance and Biocompatibility of Small-Molecule-Modified Polyurethane Biomaterials

Bacterial intracellular nucleotide second messenger signaling is involved in biofilm formation and regulates biofilm development. Interference with the bacterial nucleotide second messenger signaling provides a novel approach to control biofilm formation and limit microbial infection in medical devices. In this study, we tethered small-molecule derivatives of 4-arylazo-3,5-diamino-1H-pyrazole on polyurethane biomaterial surfaces and measured the biofilm resistance and initial biocompatibility of modified biomaterials in in vitro and in vivo settings. Results showed that small-molecule-modified surfaces significantly reduced the Staphylococcal epidermidis biofilm formation compared to unmodified surfaces and decreased the nucleotide levels of c-di-AMP in biofilm cells, suggesting that the tethered small molecules interfere with intracellular nucleotide signaling and inhibit biofilm formation. The hemocompatibility assay showed that the modified polyurethane films did not induce platelet activation or red blood cell hemolysis but significantly reduced plasma coagulation and platelet adhesion. The cytocompatibility assay with fibroblast cells showed that small-molecule-modified surfaces were noncytotoxic and cells appeared to be proliferating and growing on modified surfaces. In a 7-day subcutaneous infection rat model, the polymer samples were implanted in Wistar rats and inoculated with bacteria or PBS. Results show that modified polyurethane significantly reduced bacteria by ∼2.5 log units over unmodified films, and the modified polymers did not lead to additional irritation/toxicity to the animal tissues. Taken together, the results demonstrated that small molecules tethered on polymer surfaces remain active, and the modified polymers are biocompatible and resistant to microbial infection in vitro and in vivo.

Antimicrobial Nonisocyanate Polyurethane Foam Derived from Lignin for Wound Healing

Medical dressings, as a cover for wounds, can replace damaged skin in the wound healing process to play a temporary barrier role, avoid or control wound infection, and provide a favorable environment for wound healing. Therefore, there is an urgent need for medical antimicrobial dressings for the treatment of chronic wounds. Although traditional polyurethane foam has been widely used in medical dressings, conventional polyurethane foams are primarily prepared using nonbiocompatible isocyanate-based compounds, which are potentially hazardous for both operators and applications in the medical field. Here, we propose nonisocyanate polyurethane foams naturally derived from lignin by enzymatic lignin alkylation, cyclic carbonation modification, and polymerization with diamine and the addition of a blowing agent. Silver nanoparticle solution was added during foaming to confer antimicrobial properties. This lignin-based nonisocyanate polyurethane/silver composite foam (named NIPU foam-silver) using a green synthesis method has good mechanical properties, which can be used to manufacture polyurethane/silver foams, and thermal and antimicrobial properties. Notably, NIPU foam-Ag showed more than 95% bactericidal efficacy against both Escherichia coli and Staphylococcus aureus within 4 h. Evaluation of in vitro wounds in mice showed that this antimicrobial composite foam rapidly promotes wound healing and repairs damaged tissue. This suggests that this biobased biodegradable antimicrobial foam has significant scope for clinical applications in wound management.

Biodegradation of Urethane Dimethacrylate-based materials (CAD/CAM resin-ceramic composites) and its effect on the adhesion and proliferation of Streptococcus mutans

OBJECTIVE

To investigate whether urethane dimethacrylate (UDMA) -based dental restorative materials biodegrade in the presence of Streptococcus mutans (S. mutans) and whether the monomers affect the adhesion and proliferation of S. mutans in turn.

METHODS

Cholesterol esterase and pseudocholinesterase-like activities in S. mutans were detected using p-nitrophenyl substrate. Two UDMA-based CAD/CAM resin-ceramic composites, Lava Ultimate (LU) and Vita Enamic (VE), and a light-cured UDMA resin block were co-cultured with S. mutans for 14 days. Their surfaces were characterized by scanning electron microscopy and laser microscopy, and the byproducts of biodegradation were examined by Ultra Performance Liquid Chromatography-Tandem Mass Spectrometry (UPLC-MS/MS). Then, the antimicrobial components (silver nanoparticles with quaternary ammonium salts) were added to the UDMA resin block to detect whether the biodegradation was restrained. Finally, the effect of UDMA on biofilm formation and virulence expression of S. mutans was assessed.

RESULTS

Following a 14-day immersion, the LU and UDMA resin blocks' surface roughness increased. The LU and VE groups had no UDMA or its byproducts discovered, according to the UPLC-MS/MS data, whereas the light-cured UDMA block group had UDMA, urethane methacrylate (UMA), and urethane detected. The addition of antimicrobial agents showed a significant reduction in the release of UDMA. Biofilm staining experiments showed that UDMA promoted the growth of S. mutans biofilm and quantitative real-time polymerase chain reaction results indicated that 50 μg/mL UDMA significantly increase the expression of gtfB, comC, comD, comE, and gbpB genes within the biofilm.

CONCLUSIONS

UDMA in the light-cured resin can be biodegraded to produce UMA and urethane under the influence of S. mutans. The formation of early biofilm can be promoted and the expression of cariogenic genes can be up-regulated by UDMA.

CLINICAL SIGNIFICANCE

This study focuses for the first time on whether UDMA-based materials can undergo biodegradation and verifies from a genetic perspective that UDMA can promote the formation of S. mutans biofilms, providing a reference for the rational use of UDMA-based materials in clinical practice.

Overcoming the Dilemma of In Vivo Stable Adhesion and Sustained Degradation by the Molecular Design of Polyurethane Adhesives for Bone Fracture Repair

Bone adhesive is a promising candidate to revolutionize the clinical treatment of bone repairs. However, several drawbacks have limited its further clinical application, such as unreliable wet adhesive performance leading to fixation failure and poor biodegradability inhibiting bone tissue growth. By incorporating catechol groups and disulfide bonds into polyurethane (PU) molecules, an injectable and porous PU adhesive is developed with both superior wet adhesion and biodegradability to facilitate the reduction and fixation of comminuted fractures and the subsequent regeneration of bone tissue. The bone adhesive can be cured within a reasonable time acceptable to a surgeon, and then the wet bone adhesive strength is near 1.30 MPa in 1 h. Finally, the wet adhesive strength to the cortical bone will achieve about 1.70 MPa, which is also five times more than nonresorbable poly(methyl methacrylate) bone cement. Besides, the cell culture experiments also indicate that the adhesives show excellent biocompatibility and osteogenic ability in vitro. Especially, it can degrade in vivo gradually and promote fracture healing in the rabbit iliac fracture model. These results demonstrate that this ingenious bone adhesive exhibits great potential in the treatment of comminuted fractures, providing fresh insights into the development of clinically applicable bone adhesives.

Facile Construction of Antimicrobial Surface via One-Step Co-Deposition of Peptide Polymer and Dopamine

The infections associated with implantable medical devices can greatly affect the therapeutic effect and impose a heavy financial burden. Therefore, it is of great significance to develop antimicrobial biomaterials for the prevention and mitigation of healthcare-associated infections. Here, a facile construction of antimicrobial surface via one-step co-deposition of peptide polymer and dopamine is reported. The co-deposition of antimicrobial peptide polymer DLL60 BLG40 with dopamine (DA) on the surface of thermoplastic polyurethane (TPU) provides peptide polymer-modified TPU surface (TPU-DLL60 BLG40 ). The antimicrobial test shows that the TPU-DLL60 BLG40 surfaces of the sheet and the catheter both exhibit potent killing of 99.9% of methicillin-resistant Staphylococcus aureus (MRSA) and Escherichia coli (E. coli). In addition, the TPU-DLL60 BLG40 surface also exhibits excellent biocompatibility. This one-step antimicrobial modification method is fast and efficient, implies promising application in surface antimicrobial modification of implantable biomaterials and medical devices.

Thermoplastic polyurethane/POSS nanohybrids: Synthesis, morphology, and biological properties

Recent studies show good osteoinductive properties of polyurethanes modified with polyhedral oligomeric silsesquioxanes (POSS). In this work, three types of POSS; propanediolisobutyl-POSS (PHI-POSS), disilanolisobutyl-POSS (DSI-POSS), and octahydroxybutyl-POSS (OCTA-POSS) were chemically incorporated into linear polyurethane based on an aliphatic isocyanate, hexamethylene diisocyanate (HDI), to obtain new nanohybrid PU-POSS materials. The full conversion of POSS was confirmed by Fourier transform infrared spectroscopy (FTIR-ATR) spectra of the model reactions with pure HDI. The materials obtained were investigated by FTIR, SEM-EDS, and DSC. The DSC studies showed the thermoplasticity of the obtained materials and apparently good recovery. 30-day immersion in SBF (simulated body fluid) revealed an increase in the rate of deposition of hydroxyapatite (HAp) for the highest POSS loadings, resulting in thick layers of hydroxyapatite (~60-40 μm), and the Ca/P ratio 1.67 (even 1.785). The structure and properties of the inorganic layer depend on the type of POSS, the number of hard segments, and those containing POSS, which can be tailored by changing the HDI/poly(tetramethylene glycol) (PTMG) ratio. Furthermore, the obtained composites revealed good biocompatibility, as confirmed by cytotoxicity tests conducted on two cell lines; normal human dermal fibroblasts (NHDF) and primary human osteoblasts (HOB). Adherent cells seeded on the tested materials showed viability even after a 48-h incubation. After this time, the population of viable, and proliferating cells exceeded 90%. Bioimaging studies have shown the fibroblast and osteoblast cells were well attached to the surface of the tested materials.

Sustainable Routed Mxene-Based Aminolyzed PU/PCL Film for Increased Oxidative Stress and a pH-Sensitive Drug Delivery System for Anticancer Therapy

A remarkable challenge in the anticancer drug delivery system is developing an implantable system that can improve the chemotherapeutic effect. Polyurethane is an excellent implantable substrate, with flaws in hydrophobicity. We modified polyurethane via the chemical aminolysis technique to enhance the wettability and protein interaction. The created pores can release the rutin complex incorporated in the polyurethane matrix. In this work, the hybrid polymer matrix consists of Mxene synthesized via a sustainable and simple method by introducing a toxic-free MAX phase and etchants. The incorporation of Mxene and PCL can enhance physicochemical and biological compatibility. Sustainable Mxene increases oxidative stress, cell death, and antibacterial activity, which also resulted in the Mxene@APU/PCL film. Meanwhile, the drug release with respect to pH sensitivity was demonstrated in which Mxene and Mxene@APU/PCL films showed the highest release at pH 5.2; this indicates that the prepared Mxene and aminolyzed polyurethane can function according to the biological system and release the drug from the polymer matrix on slow degradation and swellability. The Mxene and Mxene@APU/PCL films showed 93.2% drug release with oxidative stress on THP-1 cells, which causes rupturing and apoptosis of cancerous cells. The Mxene@APU/PCL film can show great potential in future implantable anticancer drug delivery systems.

Biodegradable Polyurethane Scaffolds in Regeneration Therapy: Characterization and In Vivo Real-Time Degradation Monitoring by Grafted Fluorescent Tracer

There is an urgent need to assess material degradation in situ and in real time for their promising application in regeneration therapy. However, traditional monitoring methods in vitro cannot always profile the complicated behavior in vivo. This study designed and synthesized a new biodegradable polyurethane (PU-P) scaffold with polycaprolactone glycol, isophorone diisocyanate, and l-lysine ethyl ester dihydrochloride. To monitor the degradation process of PU-P, calcein was introduced into the backbone (PU-5) as a chromophore tracing in different sites of the body and undegradable fluorescent scaffold (CPU-5) as the control group. Both PU-P and PU-5 can be enzymatically degraded, and the degradation products are molecularly small and biosafe. Meanwhile, by virtue of calcein anchoring with urethane, polymer chains of PU-5 have maintained the conformational stability and extended the system conjugation, raising a structure-induced emission effect that successfully achieved a significant enhancement in the fluorescence intensity better than pristine calcein. Evidently, unlike the weak fluorescent response of CPU-5, PU-5 and its degradation can be clearly imaged and monitored in real time after implantation in the subcutaneous tissue of nude mice. Meanwhile, the in situ osteogeneration has also been promoted after the two degradable scaffolds have been implanted in the rabbit femoral condyles and degraded with time. To sum up, the strategy of underpinning tracers into degradable polymer chains provides a possible and effective way for real-time monitoring of the degradation process of implants in vivo.

Fabrication of Oleophilic Polypeptide Nanoparticle from Complexing of Cross-Linked Epsilon-poly-l-lysine with Docusate Sodium for Preparation of Bactericidal Thermoplastic Polyurethanes

Thermoplastic polyurethanes (TPUs) are extensively utilized in the biomedical field due to their exceptional mechanical properties and biocompatibility. However, the lack of antibacterial activity limits their application ranges. Nanoscopic particle-based additives with inherent antibacterial characteristics are regarded as promising strategies to prevent biomaterials-associated infection. Herein, a novel polymeric nanoparticle is prepared, which integrates chemically cross-linked epsilon-poly-l-lysine (CPL) and anionic surfactant-docusate sodium (DS). The cross-linked epsilon-poly-l-lysine/docusate sodium (CPL/DS) nanoparticle can be well dispersed in organic solvent and a polymer matrix, which is beneficial to endowing TPUs with synergistic miscibility and antibacterial properties. An antibacterial test showed that the CPL/DS nanoparticles have strong antibacterial activity against S. aureus. Moreover, the results of antibacterial experiments in vitro revealed that almost 100% of S. aureus could be killed by CPL/DS nanoparticle-embedded TPU film with a content of 0.5 wt %. In addition, all of the CPL/DS modified TPU films showed good cytocompatibility in vitro. Consequently, this kind of CPL/DS nanoplatform has great potential to serve as a safe and high-efficient bactericidal agent for endowing biomedical devices with bactericidal property.

Green preparation of antibacterial shape memory foam based on bamboo cellulose nanofibril and waterborne polyurethane for adaptive relief of plantar pressure

This study developed an aqueous solution blending and freeze-drying method to prepare an antibacterial shape memory foam (WPPU/CNF) based on waterborne PHMG-polyurethane and cellulose nanofibers derived from bamboo in response to the increasing demand for environmentally friendly, energy conserving, and multifunctional foams. The obtained WPPU/CNF composite foam has a highly porous network structure with well-dispersed CNFs forming hydrogen bonds with the WPPU matrix, which results in a stable and rigid cell skeleton with enhanced mechanical properties (80 KPa) and anti-abrasion ability. The presence of guanidine in the polyurethane chain endowed the WPPU/CNF composite foam with an instinctive and sustained antibacterial ability against Escherichia coli and Staphylococcus aureus. The WPPU/CNF composite foam exhibited a water-sensitive shape memory function in a cyclic shape memory program because of the chemomechanical adaptability of the hydrogen-bonded network of CNFs in the elastomer matrix. The shape-fixation ratio for local compression reached 95 %, and the shape-recovery rate reached 100 %. This allows the WPPU/CNF pad prototype to reversibly adjust the undulation height to adapt to plantar ulcers, which can reduce the local plantar pressure by 60 %. This study provides an environmentally friendly strategy for cellulose-based composite fabrication and enriches the design and application of intelligent foam devices.

Electrospun methacrylated natural/synthetic composite membranes for gingival tissue engineering

New functional materials for engineering gingival tissue are still in the early stages of development. Materials for such applications must maintain volume and have advantageous mechanical and biological characteristics for tissue regeneration, to be an alternative to autografts, which are the current benchmark of care. In this work, methacrylated gelatin (GelMa) was photocrosslinked with synthetic immunomodulatory methacrylated divinyl urethanes and defined monomers to generate composite scaffolds. Using a factorial design, with the synthetic monomers of a degradable polar/hydrophobic/ionic polyurethane (D-PHI) and GelMa, composite materials were electrospun with polycarbonate urethane (PCNU) and light-cured in-flight. The materials had significantly different relative hydrophilicities, with unique biodegradation profiles associated with specific formulations, thereby providing good guidance to achieving desired mechanical characteristics and scaffold resorption for gingival tissue regeneration. In accelerated esterase/collagenase degradation models, the new materials exhibited an initial rapid weight loss followed by a more gradual rate of degradation. The degradation profile allowed for the early infiltration of human adipose-derived stromal/stem cells, while still enabling the graft's structural integrity to be maintained. In conclusion, the materials provide a promising candidate platform for the regeneration of oral soft tissues, addressing the requirement of viable tissue infiltration while maintaining volume and mechanical integrity. STATEMENT OF SIGNIFICANCE: There is a need for the development of more functional and efficacious materials for the treatment of gingival recession. To address significant limitations in current material formulations, we sought to investigate the development of methacrylated gelatin (GelMa) and oligo-urethane/methacrylate monomer composite materials. A factorial design was used to electrospin four new formulations containing four to five monomers. Synthetic immunomodulatory monomers were crosslinked with GelMa and electrospun with a polycarbonate urethane resulting in unique mechanical properties, and resorption rates which align with the original design criteria for gingival tissue engineering. The materials may have applications in tissue engineering and can be readily manufactured. The findings of this work may help better direct the efforts of tissue engineering and material manufacturing.

Ant-nest type porous scaffold with micro-struts consisting of carbonate apatite for promoting bone formation and scaffold resorption

Scaffolds having appropriate mechanical strength and providing a proper microenvironment for osteogenesis are expected to be effective alternatives to autografts for bone regeneration. In this study, ant-nest type porous (ANP) scaffolds consisting of CO3 Ap were fabricated using calcium carbonate powder or slurry and two types of polyurethane foam through a dissolution-precipitation reaction. ANP-type, three-dimensional, interconnected porous CO3 Ap scaffolds were fabricated by burning out the struts of polyurethane foams embedded in CaCO3 , followed by compositional transformation from CaCO3 to CO3 Ap. The types of polyurethane foam and impregnation methods of CaCO3 into polyurethane form affected the geometry of the resulting ANP structures. Mechanical and in vivo biological performances of these scaffolds relied on the geometry of the ANP structures. The ANP structures displayed had a clear structural advantage in bone regeneration, owing to the promotion of cell and tissue migration throughout the scaffolds. In particular, ANP-structured scaffolds, which had highest porosity, interconnectivity, and smallest strut thickness, had a mechanical strength comparable to cancellous bone, formed more new bone, were highly resorbed, resulting in cancellous bone-like bone tissue regeneration at 12 weeks of healing. The results suggest that bone regeneration after the migration of cell and tissue into the entire scaffolds is affected by strut thickness preferentially over porosity and interconnectivity. ANP-structured CO3 Ap scaffolds are attractive for bone regeneration.

Sustainable Janus lignin-based polyurethane biofoams with robust antibacterial activity and long-term biofilm resistance

Conventional antibiotic therapies have been becoming less efficient due to increasingly, and sometimes fully, antibiotic-resistant bacterial strains, sometimes known as "superbacteria" or "superbugs." Thus, novel antibacterial materials to effectively inhibit or kill bacteria are crucial for humanity. As a broad-spectrum antimicrobial agent, silver nanoparticles (Ag NPs) have been the most widely commercialized of biomedical materials. However, long-term use of significant amounts of Ag NPs can be potentially harmful to human health through a condition known as argyria, in addition to being toxic to many environmental systems. It is, thus, highly necessary to reduce the amount of Ag NPs employed in medical treatments while also ensuring maintenance of antimicrobial properties, in addition to reducing the overall cost of treatment for humanitarian utilization. For this purpose, naturally sourced antimicrobial polylysine (PL) is used to partially replace Ag NPs within the materials composition. Accordingly, a series of PL, Ag NPs, and lignin-based polyurethane (LPU) composite biofoams (LPU-PL-Ag) were prepared. These proposed composite biofoams, containing at most only 2 % PL and 0.03 % Ag NPs, significantly inhibited the growth of both Gram-positive and Gram-negative bacteria within 1 h and caused irreversibly destructive bactericidal effects. Additionally, with a layer of polydimethylsiloxane (PDMS) on the surface, PDMS-LPU-PL(2 %)-Ag(0.03 %) can effectively prevent bacterial adhesion with a clearance rate of about 70 % for both bacterial biofilms within three days and a growth rate of more than 80 % for mouse fibroblasts NIH 3 T3. These lignin-based polyurethane biofoam dressings, with shorter antiseptic sterilization times and broad-spectrum antibacterial effects, are extremely advantageous for infected wound treatment and healing in clinical use.

Biomimetic helical fiber cellulose acetate/thermoplastic polyurethanes photodynamic antibacterial membrane: Synthesis, characterization, and antibacterial application

This study designed a novel co-electrospun cellulose acetate (CA)/thermoplastic polyurethane (TPU) photodynamic helical fiber antibacterial membrane as a potential environmentally friendly medical protective material. A central combined design method (CCD) based on response surface methodology (RSM) was used to analyze essential variables' influence. The optimized parameters for CCD were TPU (wt%) 11.68 %, CA (wt%) 13.89 %, DMAc/ACE volume ratio 0.147, LiCl (wt%) 1.39 %, and voltage (kV) 14.43 V. Pitch and pitch diameter were the response process as the critical output variable. The membranes were characterized by SEM, TG, FT-IR, and molecular structure analysis. The results showed that the photodynamic helical fiber antimicrobial membrane exhibited synergistic effects of the antibacterial photodynamic therapy (APDT) and antimicrobial agent under average daylight irradiation. The release rate of -OH was 98.22 %, and H2O2 was 88.36 % under the action of 20 min of light. The bactericidal rates of S. aureus and E. coli reached 99.9 % and 99.7 %, respectively. The fiber helical structure can increase the light absorption rate, thus increasing the release rate and amount of reactive oxygen species (ROS) species, increasing the antibacterial rate. After washing five times, the antibacterial membrane has excellent antibacterial performance and a dark antibacterial effect.

Design of biodegradable polyurethanes and post-modification with long alkyl chains via inhibiting biofilm formation and killing drug-resistant bacteria for the treatment of wound bacterial infection

The development of cationic polymers that simulate antimicrobial peptides to treat bacterial infections has received much research interest. In order to obtain polymers that can not only eradicate bacteria but also inhibit biofilm formation, without inducing bacterial drug resistance, a series of cationic polymers have been developed. Despite recent progress, the chemical structures of these polymers are stable, making them recalcitrant to biodegradation and metabolism within organisms, potentially inducing long-term toxicity. To overcome this limitation, herein, a novel strategy of designing biodegradable polyurethanes with tertiary amines and quaternary ammonium salts via condensation polymerization and post-functionalizing them is reported. These polymers were found to exhibit potent antibacterial activity against Staphylococcus aureus and Escherichia coli, effectively prevent the formation of Staphylococcus aureus biofilms, act quickly and effectively against bacteria and display no resistance after repeated use. In addition, the potent in vivo antibacterial effects of these antimicrobial polyurethanes in a mouse model with methicillin-resistant Staphylococcus aureus skin infection are demonstrated.

A Temperature and pH Dual-Sensitive Multifunctional Polyurethane with Bacteria-Triggered Antibacterial Activity

An effective and practical antibacterial strategy is to design multifunctional and stimuli-responsive materials that exhibit antibacterial activity in response to bacterial triggers. In this study, because the metabolism of Staphylococcus aureus (S. aureus) can acidify the surrounding environment and pH level can affect the lower critical solution temperature of temperature/pH dual-sensitive polymers, a monomer containing a temperature-sensitive N-isopropyl amide derivative and pH-sensitive tertiary amine groups is first synthesized. Then, the monomer is copolymerized with a polyurethane chain, and partial tertiary amine groups are quaternized to obtain bactericidal activity. The modified polyurethane exhibits temperature/pH sensitivity, antibacterial adhesion activity, bactericidal activity, and good cytocompatibility. An in situ investigation of bacterial behavior and pH changes in the bacterial suspension during the process confirms that the temperature/pH dual-sensitive polyurethane successfully achieves antibacterial activity though the metabolic activity of S. aureus without external intervention. This design concept provides a new perspective for antibacterial material design.

Polydopamine functionalized polyurethane shape memory sponge with controllable expansion performance triggered by near-infrared light for incompressible hemorrhage control

Uncontrolled expansion of shape memory sponges face a significant challenge in the treatment of lethal incompressible hemorrhage, which can lead to blood overflow or damage to the surrounding tissue. Herein, we developed a polydopamine functionalized polyurethane shape memory sponge (PDA-TPI-PU) with a controllable degree of expansion by near-infrared (NIR) light-triggered stimulation for the treatment of incompressible hemorrhage. The sponge has excellent liquid absorption performance and robust mechanical strength as well as good photothermal conversion ability. Under NIR light of 0.32 W/cm2, the maximum recovery rate of the fixed-shape compression sponge was 91% within 25 s in air and 80% within 25 s in blood. In the SD rat liver penetrating injury model, compared with commercial medical gelatin sponge and PVA sponge, the PDA-TPI-PU sponge could effectively control the bleeding under the NIR light irradiation and did not cause excessive compression of the wound. The sponge with these characteristics shows potential application prospects as a hemostatic material.

Janus polyurethane sponge as an antibiofouling, antibacterial, and exudate-managing dressing for accelerated wound healing

The non-fouling condition, bacteria-free environment and suitable moisture at wound site are crucial for chronic wound healing. However, it remains highly meaningful yet challenging to develop wound dressings that can simultaneously achieve these desirable functions. In this work, a kind of multifunctional Janus polyurethane sponge (Janus-PU) was designed and fabricated by coating near-infrared (NIR)-responsive and superhydrophobic nanoparticles (F-ZnO@Ag NPs) on one surface of sponge. The nano-functionalized outer layer can endow Janus-PU with superhydrophobic antifouling property for preventing bacterial colonization and broad-spectrum antibacterial activity due to the presence of Ag NPs. Especially, the synergistic combination of asymmetric structure and strong NIR photothermal effect can impart Janus-PU with NIR-controlled unidirectional exudate removal, thus achieving an optimal wetting environment for wound healing. The mice full-thickness skin acute wounds treated with Janus-PU under NIR irradiation showed superior anti-infection and healing effect compared to the commercial dressings. Significantly, the treatment using Janus-PU with NIR irradiation can accelerate the recovery of methicillin-resistant Staphylococcus aureus (MRSA)-infected diabetic chronic wounds due to the synergistic effect of antibiofouling, antibacterial and exudate-managing. The Janus-PU as a promising multifunctional dressing can prevent bacterial invasion and create an appropriate environment for wound healing, providing an effective solution for intractable wounds and infections. STATEMENT OF SIGNIFICANCE: The development of advanced wound dressings to ensure non-fouling condition, bacteria-free environment and suitable moisture is crucial for chronic wound healing. However, it remains a considerable challenge to simultaneously integrate antibiofouling, antibacterial and exudate-managing properties into a single dressing. In this work, we developed a kind of multifunctional Janus polyurethane sponge (Janus-PU) by a single-sided superhydrophobic modification strategy, which can simultaneously achieve superhydrophobic antifouling property, effective broad-spectrum antibacterial and near-infrared controlled exudate removal. The Janus-PU designed herein can not only create an optimal environment for accelerated wound healing, but also avoid frequent dressing replacement, thus providing an ideal material system for intractable wounds and infections.

Polypropylene composite mesh modified by polyurethane gel with ROS scavenging and anti-inflammatory effects for pelvic floor repair

Development of an inflammation modulating polypropylene (PP) mesh in pelvic floor repair is an urgent clinical need. This is because PP mesh for pelvic floor repair can cause a series of complications related to foreign body reactions (FBR) in postoperative period. Therefore, we successfully prepared PP composite mesh that can scavenge reactive oxygen species (ROS) and inhibit inflammation to moderate FBR by a simple method. First, a pregel layer was formed on PP mesh by dip coating. Among them, polyurethane with polythioketal (PTK) is an excellent ROS scavenger, and dopamine methacrylamide (DMA) improves the stability of the coating and synergistically scavenges ROS. Then, a composite mesh (optimal PU50-PP) was obtained by photopolymerization. The results showed that the polyurethane gel layer was able to scavenge more than 90% of free radicals and about 75% of intracellular ROS. In vitro, PU50-PP mesh significantly scavenged ROS and resisted macrophage adhesion. After implantation in the posterior vaginal wall of rats, PU50-PP eliminated 53% of ROS, inhibited inflammation (decreased IL-6, increased IL-10), and dramatically reduced collagen deposition by about 64%, compared to PP mesh. Thus, the composite PP mesh with ROS scavenging and anti-inflammatory properties provides a promising approach for mitigating FBR.

A robust mixed-charge zwitterionic polyurethane coating integrated with antibacterial and anticoagulant functions for interventional blood-contacting devices

Antifouling coatings based on zwitterionic polymers have been widely applied for surface modification of interventional blood-contacting devices to combat thrombosis and infection. However, the weak adhesion stability of the zwitterionic coating to the device surface is still the key challenge. In this work, biocompatible mixed-charge zwitterionic polyurethane (MPU) polymers, that bear equal amounts of cationic quaternary amine groups and anionic carboxyl groups, were developed and further uniformly dip-coated onto a thermoplastic polyurethane (TPU) substrate with a commercial aliphatic isocyanate cross-linker (AIC). During the curing process, AIC not only crosslinks MPU chains into a polymer network but also reacts with hydroxyl groups of TPU to interlink the polymer network to the substrate, resulting in a cross-linking reinforced MPU coating (CMPU) with excellent mechanical robustness and adhesion strength. Taking advantage of the mixed-charge feature, the final zwitterionic CMPU coating exhibits both excellent antifouling and antibacterial activities against protein adsorption and bacterial growth, respectively, which is beneficial for effectively inhibiting the occurrence of in vivo infection. Moreover, anticoagulation studies show that CMPU-coated TPU catheters can also prevent the formation of blood clots in ex vivo rabbit blood circuits without anticoagulants. Hence, the designed CMPU coating has immense potential to address thrombosis and infection for interventional blood-contacting devices.

Magnetic and Biocompatible Polyurethane Nanofiber Biomaterial for Tissue Engineering

Recruitment of endothelial cells to cardiovascular device surfaces could solve issues of thrombosis, neointimal hyperplasia, and restenosis. Since current targeting strategies are often nonspecific, new technologies to allow for site-specific cell localization and capture in vivo are needed. The development of cytocompatible superparamagnetic iron oxide nanoparticles has allowed for the use of magnetism for cell targeting. In this study, a magnetic polyurethane (PU)-2205 stainless steel (2205-SS) nanofibrous composite biomaterial was developed through analysis of composite sheets and application to stent-grafts. The PU nanofibers provide strength and elasticity while the 2205-SS microparticles provide ferromagnetic properties. Sheets were electrospun at mass ratios of 0-4:1 (2205-SS:PU) and stent-grafts with magnetic or nonmagnetic stents were coated at the optimal ratio of 2:1. These composite materials were characterized by microscopy, mechanical testing, a sessile drop test, magnetic field measurement, magnetic cell capture assays, and cytocompatibility after 14 days of culturing with endothelial cells. Results of this study show that an optimal ratio of 2:1 2205-SS:PU results in a hydrophobic material that balanced mechanical and magnetic properties and was cytocompatible up to 14 days. Significant cell capture required a thicker material of 0.5 mm thickness. Stent-grafts fabricated from a magnetic coating and a magnetic stent demonstrated uniform cell capture throughout the device surface. This novel biomaterial exhibits a combination of mechanical and magnetic properties that enables magnetic capture of cells and other therapeutic agents for vascular and other tissue engineering applications.

Novel mechanically strong and antibacterial dimethacrylate copolymers based on quaternary ammonium urethane-dimethacrylate analogues

OBJECTIVES

This study assumed that the quaternary ammonium urethane-dimethacrylate derivative (QAUDMA-m, where m was 8, 10, 12, 14, 16, 18, and corresponded to the number of carbon atoms in the N-alkyl substituent) can be used to achieve copolymers with high mechanical performance and antibacterial activity.

METHODS

Photocured copolymers of bisphenol A glycerolate dimethacrylate (Bis-GMA) 40 wt%, QAUDMA-m 40 wt%, and triethylene glycol dimethacrylate (TEGDMA) 20 wt% (BG:QAm:TEG) were characterized by the degree of conversion (DC), flexural strength (FS), flexural modulus (E), hardness (HB), and antibacterial properties (the number of bacteria colonies adhered to copolymer surfaces and inhibition zone diameter (IZD)) against Staphylococcus aureus and Escherichia coli. Reference copolymers of Bis-GMA, urethane-dimethacrylate monomer (UDMA), and TEGDMA (BG:TEG and BG:UD:TEG) were also characterized.

RESULTS

The DC of BG:QAm:TEGs ranged from 0.59 to 0.68, HB from 83.84 to 153.91 MPa, FS from 50.81 to 74.47 MPa, and E from 1986.74 to 3716.68 MPa. The number of S. aureus and E. coli bacteria adhered to BG:QAm:TEG surfaces was from 0 (no bacteria observed) to 6.47 and 4.99 log(CFU/mL), respectively. IZD was from 10 and 5 mm (no inhibition zone) to 23 and 21 mm, respectively. Three copolymers: BG:QA8:TEG, BG:QA10:TEG, and BG:QA12:TEG had similar or better mechanical properties than the reference copolymers, but unlike them, they showed high antibacterial activity against both bacteria strains.

SIGNIFICANCE

The obtained copolymers can offer a good, mechanically efficient, bioactive alternative to BG:TEG and BG:UD:TEG copolymers. The use of such materials can help to make progress in dental health care.

Antimicrobial efficacy of cyclic α- and β-peptides incorporated in polyurethane coatings

Microbial growth on surfaces poses health concerns and can accelerate the biodegradation of engineered materials and coatings. Cyclic peptides are promising agents to combat biofouling because they are more resistant to enzymatic degradation than their linear counterparts. They can also be designed to interact with extracellular targets and intracellular targets and/or self-assemble into transmembrane pores. Here, we determine the antimicrobial efficacy of two pore-forming cyclic peptides, α-K3W3 and β-K3W3, against bacterial and fungal liquid cultures and their capacity to inhibit biofilm formation on coated surfaces. These peptides display identical sequences, but the additional methylene group in the peptide backbone of β-amino acids results in a larger diameter and an enhancement in the dipole moment. In liquid cultures, β-K3W3 exhibited lower minimum inhibitory concentration values and greater microbicidal power in reducing the number of colony forming units (CFUs) when exposed to a gram-positive bacterium, Staphylococcus aureus, and two fungal strains, Naganishia albida and Papiliotrema laurentii. To evaluate the efficacy against the formation of fungal biofilms on painted surfaces, cyclic peptides were incorporated into polyester-based thermoplastic polyurethane. The formation of N. albida and P. laurentii microcolonies (105 per inoculation) for cells extracted from coatings containing either peptide could not be detected after a 7-day exposure. Moreover, very few CFUs (∼5) formed after 35 days of repeated depositions of freshly cultured P. laurentii every 7 days. In contrast, the number of CFUs for cells extracted from the coating without cyclic peptides was >8 log CFU.

Histological and Histomorphometric Evaluation of Implanted Photodynamic Active Biomaterials for Periodontal Bone Regeneration in an Animal Study

Recently, our group developed two different polymeric biomaterials with photodynamic antimicrobial surface activity for periodontal bone regeneration. The aim of the present study was to analyze the biocompatibility and osseointegration of these materials in vivo. Two biomaterials based on urethane dimethacrylate (BioM1) and tri-armed oligoester-urethane methacrylate (BioM2) that additionally contained ß-tricalcium phosphate and the photosensitizer mTHPC (meso-tetra(hydroxyphenyl)chlorin) were implanted in non-critical size bone defects in the femur (n = 16) and tibia (n = 8) of eight female domestic sheep. Bone specimens were harvested and histomorphometrically analyzed after 12 months. BioM1 degraded to a lower extent which resulted in a mean remnant square size of 17.4 mm², while 12.2 mm² was estimated for BioM2 (p = 0.007). For BioM1, a total percentage of new formed bone by 30.3% was found which was significant higher compared to BioM2 (8.4%, p < 0.001). Furthermore, BioM1 was afflicted by significant lower soft tissue formation (3.3%) as compared to BioM2 (29.5%). Additionally, a bone-to-biomaterial ratio of 81.9% was detected for BioM1, while 8.5% was recorded for BioM2. Implantation of BioM2 caused accumulation of inflammatory cells and led to fibrous encapsulation. BioM1 (photosensitizer-armed urethane dimethacrylate) showed favorable regenerative characteristics and can be recommended for further studies.

Effects of Polyurethane Small-Sized Microplastics in the Chironomid, Chironomus riparius: Responses at Organismal and Sub-Organismal Levels

Freshwater provides valuable services and functions to humankind. However, macroinvertebrates that underpin the delivery of many of those ecosystem services and functions are under an additional threat caused by microplastic pollution. Chironomids are one of the most abundant groups of macroinvertebrates in these environments and the most sensitive to microplastics. This investigation addressed the effects of polyurethane (PU-MPs; 7.0-9.0 µm) on the chironomid Chironomus riparius at the organism and sub-organism levels. For this purpose, two assays were carried out: (i) addressing the effects of PU-MPs on C. riparius partial life cycle traits (larval size and emergence parameters) in a 28 d assay considering concentrations up to 750 mg/Kg, and (ii) larvae behaviour (locomotion) as well as the biochemical responses (oxidative damage, aerobic energy production, and energy reserves) in a 10 d assay considering an environmentally relevant concentration with no observed effects on C. riparius previous life history traits (no observed effect concentration; NOEC = (375 mg/kg). Exposure to PU-MPs did not affect C. riparius larval length nor cumulative and time to emergence. Conversely, when exposed to an environmentally relevant concentration for 10 days, contaminated larvae were revealed to be lighter (but not smaller nor less nutritionally affected in terms of energy reserves) and more active when foraging, which was reflected in the activation of their aerobic metabolism when assessing the electron transport chain as a proxy. Notwithstanding, PU-MPs did not originate observable energy costs, either on protein, lipid, or sugar contents on contaminated larvae, which may justify the absence of effects on larval growth and emergence. Therefore, the increased production of energy used for the locomotion and functioning of larvae was at the expense of the fraction of energy that should have been allocated for the weight of the individuals. A long-term exposure involving a multigenerational assessment would bring intel on the potential (cumulative) sub-lethal effects of PU-MPs on C. riparius fitness.

Novel In Vitro Study to Assess Microbial Barrier Properties of Polyurethane-Based Tissue Adhesives in Comparison to the Gold Standard Dermabond®

Tissue adhesives as a physical barrier to microorganism penetration provide an alternative method with many advantages for wound closure in surgical settings compared to the clinical standard. This raises the need of developing and conducting in vitro methods that are sensitive and reproducible to assess their microbial barrier properties. In this study, three different polyurethane-based tissue adhesives with different physicochemical properties were evaluated in comparison to Dermabond® as a clinical gold standard for topical wound closure. Here, physicochemical properties varied in lactide concentration, viscosity, processing, and the full polymerization time. To evaluate the microbial barrier function, a 5 μl aliquot of E. coli Lux inoculum containing at least 1 × 109 CFU/ml was applied to the surface of each test adhesive and sterile filter paper as the control that was placed on an agar plate and incubated at 37°C. Plates were observed for bacterial growth (morphology), the adhesion of the adhesive/filter paper, and bioluminescence after 24, 48, and 72 hours. The data presented in this in vitro model indicated that polyurethane-based tissue adhesives with lactide concentration ≥ 5% provided a suitable barrier against microbial penetration with 95% confidence of 99% efficacy for 72 h along with Dermabond®. Interestingly, the here described method was able to discriminate between the different physicochemical properties showing a better microbial barrier function with increasing lactide concentration of the adhesive. Overall, the results of this study showed the noninferiority between Dermabond® and the two abovementioned polyurethane-based tissue adhesives.

Antimicrobial Peptide-Tether Dressing Able to Enhance Wound Healing by Tissue Contact

No effective therapeutic dressings are currently available in the market that can prevent bacterial infection and simultaneously promote skin regeneration in diabetic patients. The lack of re-epithelization, prevalence of inflammation, and high risk of infection are hallmarks of non-healing wounds. Here, we have evaluated the antimicrobial and pro-regenerative effect of a relatively non-leaching LL37 peptide immobilized in polyurethane (PU)-based wound dressings (PU-adhesive-LL37 dressing). The PU-adhesive-LL37 (63 μg LL37NPs/cm²) dressing killed Gram-positive and Gram-negative bacteria in human serum without inducing bacterial resistance after 16 antimicrobial test cycles in contrast to commercially available dressings with the capacity to release antimicrobial Ag ions. Importantly, type II diabetic mice (db/db mice) treated with the PU-adhesive-LL37 dressing for different periods of time (6 or 14 days) showed enhanced wound healing and re-epithelialization (i.e., high keratin 14/5 levels) and lower macrophage infiltration in the wounds compared to animals treated with PU. The wounds treated with PU-adhesive-LL37 dressings showed also low expression of pro-inflammatory cytokines such as TNF-α and IL6 after 6 days of treatment, indicating that they act as an anti-inflammatory dressing. Additionally, PU-adhesive-LL37 dressings do not induce acute inflammatory responses in the peripheral blood mononuclear cells (PBMCs) after 3 days of exposure, in contrast to controls. Taken together, PU-adhesive-LL37NP dressings might prevent the bacterial infections and facilitate wound healing by tissue contact, inducing re-epithelialization and anti-inflammatory processes in diabetic conditions.

Efficacy of Selected Powdered Floor Treatments Against Salmonella, E. coli, and L. monocytogenes on Polyurethane-Concrete Flooring Material Carriers

Food processing environment flooring can become contaminated with pathogens in many ways including foot and equipment traffic, incoming materials, and floor drain backups.  Natural antimicrobial turmeric and commercially available powdered floor treatments may reduce the levels of pathogens on flooring thereby reducing the risk of cross contamination from the floor to food contact surfaces. These chemicals were evaluated to determine their effectiveness against cocktails of Salmonella , Escherichia coli , and Listeria monocytogenes dried onto the surfaces of carriers made from polyurethane-concrete commercial flooring material.  Aqueous test solutions were prepared from the minimum treatment required per m 2 from the manufacturer's instructions diluted in sterile water.  Potential synergy between turmeric and a percarbonate based commercial floor treatment was explored with a mixture of turmeric and sodium percarbonate, each at approximately 37g/m 2 application rate.  Each inoculated carrier was exposed to the treatment solutions or a sterile water control for 10 minutes at room temperature, neutralized with Hi-Cap neutralizing broth, the bacteria suspended, enumerated, and log 10 reductions calculated for each treatment and inoculum combination.  Mean log 10 CFU/carrier reductions with standard deviations ranged between 4.29±0.34 for the sodium percarbonate (SPC) based treatment and 0.004±0.23 for turmeric for Salmonella , 4.81±0.16 for SPC based treatment and -0.16±0.62 for turmeric for E. coli , and 4.88±0.6 for SPC based treatment and -0.16±0.15 for turmeric for L. monocytogenes .

Polydopamine Nanoparticle-Reinforced Near-Infrared Light-Triggered Shape Memory Polycaprolactone-Polydopamine Polyurethane for Biomedical Implant Applications

Near-infrared (NIR) light-triggered shape memory polymers are expected to have a more promising prospect in biomedical applications compared with traditional heat-triggered shape memory polymers. In this work, a new kind of polyurethane with NIR light-triggered shape memory property was prepared by using polycaprolactone (PCL), polydopamine nanoparticles (PDANPs), hexamethylene diisocyanate (HDI), and 1,4-butanediol (BDO). The synthesized PCL-PDA polyurethanes, especially when the weight content of PDANPs was 0.17%, showed excellent mechanical properties because the PDANPs were well-dispersed in polyurethanes by the chain extension reaction. Moreover, it also showed an NIR light-triggered rapid shape recovery because of the photothermal effect of polydopamine. The in vitro and in vivo tests showed that the PCL-PDA polyurethane would not inhibit cell proliferation nor induce a strong host inflammatory response, revealing the non-cytotoxicity and good biocompatibility of the material. In addition, the PCL-PDA polyurethane exhibited excellent in vivo NIR light-triggered shape memory performance under an 808 nm laser with low intensity (0.33 W cm^-2), which was harmless to the human skin. These results demonstrated the potential of the PCL-PDA polyurethane in biomedical implant applications.

Dual Spinneret Electrospun Polyurethane/PVA-Gelatin Nanofibrous Scaffolds Containing Cinnamon Essential Oil and Nanoceria for Chronic Diabetic Wound Healing: Preparation, Physicochemical Characterization and In-Vitro Evaluation

In this study, a dual spinneret electrospinning technique was applied to fabricate a series of polyurethane (PU) and polyvinyl alcohol-gelatin (PVA/Gel) nanofibrous scaffolds. The study aims to enhance the properties of PU/PVA-Gel NFs loaded with a low dose of nanoceria through the incorporation of cinnamon essential oil (CEO). The as-prepared nCeO2 were embedded into the PVA/Gel nanofibrous layer, where the cinnamon essential oil (CEO) was incorporated into the PU nanofibrous layer. The morphology, thermal stability, mechanical properties, and chemical composition of the produced NF mats were investigated by STEM, DSC, and FTIR. The obtained results showed improvement in the mechanical, and thermal stability of the dual-fiber scaffolds by adding CEO along with nanoceria. The cytotoxicity evaluation revealed that the incorporation of CEO to PU/PVA-Gel loaded with a low dose of nanoceria could enhance the cell population compared to using pure PU/PVA-Gel NFs. Moreover, the presence of CEO could inhibit the growth rate of S. aureus more than E. coli. To our knowledge, this is the first time such nanofibrous membranes composed of PU and PVA-Gel have been produced. The first time was to load the nanofibrous membranes with both CEO and nCeO2. The obtained results indicate that the proposed PU/PVA-Gel NFs represent promising platforms with CEO and nCeO2 for effectively managing diabetic wounds.

Design, Synthesis, Antibacterial, and Antitumor Activity of Linear Polyisocyanide Quaternary Ammonium Salts with Different Structures and Chain Lengths

The development of organic polymer materials for disinfection and sterilization is thought of as one of the most promising avenues to solve the growth and spread of harmful microorganisms. Here, a series of linear polyisocyanide quaternary ammonium salts (L-PQASs) with different structures and chain lengths were designed and synthesized by polymerization of phenyl isocyanide monomer containing a 4-chloro-1-butyl side chain followed by quaternary amination salinization. The resultant compounds were characterized by 1H NMR and FT-IR. The antibacterial activity of L-PQASs with different structures and chain lengths against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was evaluated by determining the minimum inhibitory concentrations (MICs). The L-POcQAS-M50 has the strongest antimicrobial activity with MICs of 27 μg/mL against E. coli and 32 μg/mL against S. aureus. When the L-PQASs had the same polymerization degree, the order of the antibacterial activity of the L-PQASs was L-POcQAS-Mn > L-PBuQAS-Mn > L-PBnQAS-Mn > L-PDBQAS-Mn (linear, polyisocyanide quaternary ammonium salt, monomer, n = 50,100). However, when L-PQASs had the same side chain, the antibacterial activity reduced with the increase of the molecular weight of the main chain. These results demonstrated that the antibacterial activity of L-PQASs was dependent on the structure of the main chain and the length of the side chain. In addition, we also found that the L-POcQAS-M50 had a significant killing effect on MK-28 gastric cancer cells.

Synthetic Analogue of Butenolide as an Antifouling Agent

Butenolide derivatives have the potential to be effective and environmentally friendly antifouling agents. In the present study, a butenolide derivative was structurally modified into Boc-butenolide to increase its melting point and remove its foul smell. The structurally modified Boc-butenolide demonstrated similar antifouling capabilities to butenolide in larval settlement bioassays but with significantly lower toxicity at high concentrations. Release-rate measurements demonstrated that the antifouling compound Boc-butenolide could be released from polycaprolactone-polyurethane (PCL-PU)-based coatings to inhibit the attachment of foulers. The coating matrix was easily degraded in the marine environment. The performance of the Boc-butenolide antifouling coatings was further examined through a marine field test. The coverage of biofouler on the Boc-butenolide coatings was low after 2 months, indicating the antifouling potential of Boc-butenolide.

Characterization of a Water-Dispersed Biodegradable Polyurethane-Silk Composite Sponge Using 13C Solid-State Nuclear Magnetic Resonance as Coating Material for Silk Vascular Grafts with Small Diameters

Recently, Bombyx mori silk fibroin (SF) has been shown to be a suitable material for vascular prostheses for small arteries. In this study, we developed a softer SF graft by coating water-dispersed biodegradable polyurethane (PU) based on polycaprolactone and an SF composite sponge on the knitted SF vascular graft. Three kinds of 13C solid-state nuclear magnetic resonance (NMR), namely carbon-13 (13C) cross-polarization/magic angle spinning (MAS), 13C dipolar decoupled MAS, and 13C refocused insensitive nuclei enhanced by polarization transfer (r-INEPT) NMR, were used to characterize the PU-SF coating sponge. Especially the 13C r-INEPT NMR spectrum of water-dispersed biodegradable PU showed that both main components of the non-crystalline domain of PU and amorphous domain of SF were highly mobile in the hydrated state. Then, the small-diameter SF artificial vascular grafts coated with this sponge were evaluated through implantation experiments with rats. The implanted PU-SF-coated SF grafts showed a high patency rate. It was confirmed that the inside of the SF grafts was covered with vascular endothelial cells 4 weeks after implantation. These results showed that the water-dispersed biodegradable PU-SF-coated SF graft created in this study could be a strong candidate for small-diameter artificial vascular graft.

Dynamically crosslinked polydimethylsiloxane-based polyurethanes with contact-killing antimicrobial properties as implantable alloplasts for urological reconstruction

A large population of patients is reported to suffer from urinary bladder-associated irreversible physiological disorders, rationalizing a continuous surge for structural and functional substitutes of urinary tissues, including ureters, bladder-wall, and urethra. The current gold standard for bladder reconstruction, an autologous gastrointestinal graft, is proven not to be an ideal substitute in the clinic. While addressing this unmet clinical need, a unique platform of antimicrobial polydimethyl siloxane-modified polyurethanes (TPU/PDMS) is designed and developed for its potential application as a urological implant. To the best of our knowledge, this study reports for the first time the successful integration of varying contents of PDMS within the molten polyurethane matrix using in situ crosslinking methodology. Thus, compatibilized binary blends possess clinically relevant viscoelastic properties to sustain high pressure, large distensions, and surgical manipulation. Furthermore, different chemical strategies are explored to covalently incorporate quaternized moieties, including 4-vinyl pyridine (4-VP), branched-polyethyleneimine (bPEI) as well as bPEI-grafted-(acrylic acid-co-vinylbenzyltriphenyl phosphonium chloride) (PAP), and counter urinary tract infections. The modified compositions, endowed with contact killing surfaces, reveal nearly three log reduction in bacterial growth in pathogenically infected artificial urine. Importantly, the antimicrobial TPU/PDMS blends support the uninhibited growth of mitochondrially viable murine fibroblasts, in a manner comparable to the medical-grade polyurethane. Collectively, the obtained results affirmed the newly developed polymers as promising biomaterials in reconstructive urology. STATEMENT OF SIGNIFICANCE: The clinical procedure for end-stage bladder disease remains replacement or augmentation of the bladder wall with a section of the patient's gastrointestinal tract. However, the absorptive and mucus-producing epithelium of intestinal segment is liable to short- and long-term complications. The dynamically crosslinked polydimethyl siloxane-based polyurethanes proposed herein, and the associated synthesis strategies to induce polycation grafted non-exhaustive contact-killing surfaces against uropathogents, have a significant clinical prospect in reconstructive urology. As an 'off-the-shelf' available alloplastic substitute, these blends offer the potential to circumvent the challenges associated with non-urinary autografts or scaffold based regenerative engineering and, thereby, shorten as well as simplify the surgical treatment. The targeted application has been conceived for a bladder patch to assist in various urinary diseases including, bladder carcinoma, refractory overactive bladder, interstitial cystitis, etc. However, given the ease of fabrication, moldability and the wide spectrum of mechanical properties that could be encompassed, these blends also present the possibility to be manifested into artificial ureteral or urethral conduits.

Silver- and Zinc-Decorated Polyurethane Ionomers with Tunable Hard/Soft Phase Segregation

Segmented polyurethane ionomers find prominent applications in the biomedical field since they can combine the good mechanical and biostability properties of polyurethanes (PUs) with the strong hydrophilicity features of ionomers. In this work, PU ionomers were prepared from a carboxylated diol, poly(tetrahydrofuran) (soft phase) and a small library of diisocyanates (hard phase), either aliphatic or aromatic. The synthesized PUs were characterized to investigate the effect of ionic groups and the nature of diisocyanate upon the structure-property relationship. Results showed how the polymer hard/soft phase segregation was affected by both the concentration of ionic groups and the type of diisocyanate. Specifically, PUs obtained with aliphatic diisocyanates possessed a hard/soft phase segregation stronger than PUs with aromatic diisocyanates, as well as greater bulk and surface hydrophilicity. In contrast, a higher content of ionic groups per polymer repeat unit promoted phase mixing. The neutralization of polymer ionic groups with silver or zinc further increased the hard/soft phase segregation and provided polymers with antimicrobial properties. In particular, the Zinc/PU hybrid systems possessed activity only against the Gram-positive Staphylococcus epidermidis while Silver/PU systems were active also against the Gram-negative Pseudomonas aeruginosa. The herein-obtained polyurethanes could find promising applications as antimicrobial coatings for different kinds of surfaces including medical devices, fabric for wound dressings and other textiles.

Light-Activated Antimicrobial Surfaces Using Industrial Varnish Formulations to Mitigate the Incidence of Nosocomial Infections

Evidence has shown that hospital surfaces are one of the major vehicles of nosocomial infections caused by drug-resistant pathogens. Smart surface coatings presenting multiple antimicrobial activity mechanisms have emerged as an advanced approach to safely prevent this type of infection. In this work, industrial waterborne polyurethane varnish formulations containing for the first time cationic polymeric biocides (SPBs) combined with photosensitizer curcumin were developed to afford contact-active and light-responsive antimicrobial surfaces. SPBs were prepared by atom transfer radical polymerization, which allows control over the polymer features that influence antimicrobial efficiency (e.g., molecular weight), while natural curcumin was employed to impart photodynamic activity to the surface. Antibacterial testing against Gram-negative Escherichia coli revealed that glass surfaces coated with the new formulations displayed photokilling effect under white-light (42 mW/cm²) irradiation within only 15 min of exposure. In addition, it was observed a combined antimicrobial effect between the two biocides (cationic SPB and curcumin), with a higher reduction in the number of viable bacteria observed for the surfaces containing cationic SPB/curcumin mixtures in comparison with the one obtained for surfaces only with polymer or without biocides. The waterborne industrial varnish formulations allowed the formation of homogeneous films without the need for addition of a coalescing agent, which can be potentially applied in diverse surface substrates to reduce bacterial transmission infections in healthcare environments.

Superhydrophilic Polyurethane/Polydopamine Nanofibrous Materials Enhancing Cell Adhesion for Application in Tissue Engineering

The use of nanofibrous materials in the field of tissue engineering requires a fast, efficient, scalable production method and excellent wettability of the obtained materials, leading to enhanced cell adhesion. We proposed the production method of superhydrophilic nanofibrous materials in a two-step process. The process is designed to increase the wettability of resulting scaffolds and to enhance the rate of fibroblast cell adhesion. Polyurethane (PU) nanofibrous material was produced in the solution blow spinning process. Then the PU fibers surface was modified by dopamine polymerization in water solution. Two variants of the modification were examined: dopamine polymerization under atmospheric oxygen (V-I) and using sodium periodate as an oxidative agent (V-II). Hydrophobic PU materials after the treatment became highly hydrophilic, regardless of the modification variant. This effect originates from polydopamine (PDA) coating properties and nanoscale surface structures. The modification improved the mechanical properties of the materials. Materials obtained in the V-II process exhibit superior properties over those from the V-I, and require shorter modification time (less than 30 min). Modifications significantly improved fibroblasts adhesion. The cells spread after 2 h on both PDA-modified PU nanofibrous materials, which was not observed for unmodified PU. Proposed technology could be beneficial in applications like scaffolds for tissue engineering.

Effect of CPPU on bulk optical properties of kiwifruit during storage in near-infrared range

BACKGROUND

Investigating the effect of N-(2-chloro-4-pyridyl)-N'-phenylurea (CPPU) on the bulk optical properties of postharvest kiwifruit is helpful in understanding the mechanism of identification of CPPU-treated kiwifruit using spectroscopy and to develop effective optical sensing techniques. In this study, the absorption coefficient μ_a and reduced scattering coefficient μ s ' of flesh and skin of kiwifruit treated with CPPU solutions at CPPU concentration levels (CCLs) of 0, 5, 10 and 15 mg L^-1 were measured by using a single integrating sphere setup over the range 950-1650 nm during 12 weeks' storage.

RESULTS

Generally, at the same storage period, there was no significant difference (P ≤ 0.05) on flesh's μ_a among the kiwifruit treated with different CCLs at absorption peaks of 970, 1190, and 1390 nm. The average flesh's μ s ' of kiwifruit treated with higher CCLs at 1190 nm were larger than those treated with lower CCLs, and there was a significant difference (P ≤ 0.05) between the kiwifruit treated with 0, 5 and 15 mg L^-1 CPPU solutions except for week 6. Contrasted with the μ_a and μ s ' of kiwifruit flesh, the μ_a and μ s ' of skin had bigger standard deviations and larger fluctuations with storage time. Additionally, the CPPU-treated kiwifruit had higher moisture content, lower firmness, and larger cells than CPPU-untreated kiwifruit.

CONCLUSIONS

This study indicates that the μ s ' of flesh has potential in identifying kiwifruit treated with different CCLs during storage. © 2020 Society of Chemical Industry.

Well-Defined Gold Nanorod/Polymer Hybrid Coating with Inherent Antifouling and Photothermal Bactericidal Properties for Treating an Infected Hernia

Biomedical device-associated infection (BAI) is a great challenge in modern clinical medicine. Therefore, developing efficient antibacterial materials is significantly important and meaningful for the improvement of medical treatment and people's health. In the present work, we developed a strategy of surface functionalization for multifunctional antibacterial applications. A functionalized polyurethane (PU, a widely used biomedical material for hernia repairing) surface (PU-Au-PEG) with inherent antifouling and photothermal bactericidal properties was readily prepared based on a near-infrared (NIR)-responsive organic/inorganic hybrid coating which consists of gold nanorods (Au NRs) and polyethylene glycol (PEG). The PU-Au-PEG showed a high efficiency to resist adhesion of bacteria and exhibited effective photothermal bactericidal properties under 808 nm NIR irradiation, especially against multidrug-resistant bacteria. Furthermore, the PU-Au-PEG could inhibit biofilm formation long term. The biocompatibility of PU-Au-PEG was also proved by cytotoxicity and hemolysis tests. The in vivo photothermal antibacterial properties were first verified by a subcutaneous implantation animal model. Then, the anti-infection performance in a clinical scenario was studied with an infected hernia model. The results of animal experiment studies demonstrated excellent in vivo anti-infection performances of PU-Au-PEG. The present work provides a facile and promising approach to develop multifunctional biomedical devices.

A Novel Bilayer Wound Dressing Composed of a Dense Polyurethane/Propolis Membrane and a Biodegradable Polycaprolactone/Gelatin Nanofibrous Scaffold

One-layer wound dressings cannot meet all the clinical needs due to their individual characteristics and shortcomings. Therefore, bilayer wound dressings which are composed of two layers with different properties have gained lots of attention. In the present study, polycaprolactone/gelatin (PCL/Gel) scaffold was electrospun on a dense membrane composed of polyurethane and ethanolic extract of propolis (PU/EEP). The PU/EEP membrane was used as the top layer to protect the wound area from external contamination and dehydration, while the PCL/Gel scaffold was used as the sublayer to facilitate cells' adhesion and proliferation. The bilayer wound dressing was investigated regarding its microstructure, mechanical properties, surface wettability, anti-bacterial activity, biodegradability, biocompatibility, and its efficacy in the animal wound model and histopathological analyzes. Scanning electron micrographs exhibited uniform morphology and bead-free structure of the PCL/Gel scaffold with average fibers' diameter of 237.3 ± 65.1 nm. Significant anti-bacterial activity was observed against Staphylococcal aureus (5.4 ± 0.3 mm), Escherichia coli (1.9 ± 0.4 mm) and Staphylococcus epidermidis (1.0 ± 0.2 mm) according to inhibition zone test. The bilayer wound dressing exhibited high hydrophilicity (51.1 ± 4.9°), biodegradability, and biocompatibility. The bilayer wound dressing could significantly accelerate the wound closure and collagen deposition in the Wistar rats' skin wound model. Taking together, the PU/EEP-PCL/Gel bilayer wound dressing can be a potential candidate for biomedical applications due to remarkable mechanical properties, biocompatibility, antibacterial features, and wound healing activities.

A novel identification method for CPPU-treated kiwifruits based on images

BACKGROUND

The application of exogenous plant growth regulator, for example forchlorfenuron (CPPU), on kiwifruits has become an important factor that influences kiwifruit economic efficiency and the health development of the kiwifruit industry. Owing to the slight difference in calyx shape between the kiwifruits treated with CPPU (CPPU-treated kiwifruits) and the kiwifruits without CPPU treatment (CPPU-untreated kiwifruits), this study aims to provide a cheap, quick, convenient, and non-destructive method for identifying CPPU-treated kiwifruits based on the images of kiwifruits captured at visible lights.

RESULTS

The identification method includes three steps. Firstly, the kiwifruit was extracted from the background by using Otsu algorithm, hole filling operation and 'bwareaopen' function. Secondly, the calyx was extracted by using corrosion, image enhancement, hole filling and closing operations. Finally, the length/width ratio of the minimum enclosing rectangle of calyx region was calculated. The kiwifruit was regarded as a CPPU-treated kiwifruit if the length/width ratio of the rectangle was higher than 1.6. Otherwise, the kiwifruit was regarded as a CPPU-untreated one. The method had the total identification accuracy rate of 90.0% when the kiwifruit images were captured either by utilizing a smartphone at normal lighting condition or by using an image acquisition system.

CONCLUSION

The programs run on computer and smartphone were developed, and they could realize kiwifruit identification in 0.6 s and 2 s, respectively. The study makes identifying CPPU-treated kiwifruits in online processing be realizable, and offers a convenient method for kiwifruit consumers. © 2019 Society of Chemical Industry.

Peptide-/Drug-Directed Self-Assembly of Hybrid Polyurethane Hydrogels for Wound Healing

Drug-loading hydrogels are promising candidates in the bioengineering research field; nevertheless, hydrophobic drug loading into a hydrophilic carrier system remains unsolved and is full of challenges. In this work, following the potential dual interactions between peptides and aromatic drugs, we developed a potent hybrid hydrogel formation method, namely, "peptide-/drug-directed self-assembly". The hybrid hydrogels were synthesized using polyethylene glycol (PEG)-based Fmoc-FF peptide hybrid polyurethane, in which curcumin could be encapsulated through self-assembly with Fmoc-FF peptide via π-π stacking. On the basis of this, curcumin loading capacity could be improved to as high as 3.3 wt % with sustained release. In addition, the curcumin loading enhanced the hydrogel mechanical properties from 4 kPa to over 10 kPa, similar to that of natural soft tissues. Furthermore, the hydrogels were injectable with self-healing properties since the Fmoc-FF peptide/curcumin coassembly was noncovalent and reversible. Spectroscopy results confirmed the existence of the coassembly of Fmoc-FF peptide/curcumin. Further in vivo experiments effectively demonstrated that the hydrogels could improve the cutaneous wound healing in a full-thickness skin defected model. This peptide-/drug-directed self-assembly of hybrid polyurethane hydrogel could be used as a promising platform for tissue-engineering scaffold and biomedical application.

Substrate stiffness- and topography-dependent differentiation of annulus fibrosus-derived stem cells is regulated by Yes-associated protein

Annulus fibrosus (AF) tissue engineering has attracted increasing attention as a promising therapy for degenerative disc disease (DDD). However, regeneration of AF still faces many challenges due to the tremendous complexity of this tissue and lack of in-depth understanding of the structure-function relationship at cellular level within AF is highly required. In light of the fact that AF is composed of various types of cells and has gradient mechanical, topographical and biochemical features along the radial direction. In this study, we aimed to achieve directed differentiation of AF-derived stem cells (AFSCs) by mimicking the mechanical and topographical features of native AF tissue. AFSCs were cultured on four types of electrospun poly(ether carbonate urethane)urea (PECUU) scaffolds with various stiffness and fiber size (soft, small size; stiff, small size; soft, large size and stiff, large size). The results show that with constant fiber size, the expression level of the outer AF (oAF) phenotypic marker genes in AFSCs increased with the scaffold stiffness, while that of inner AF (iAF) phenotypic marker genes showed an opposite trend. When scaffold stiffness was fixed, the expression of oAF phenotypic marker genes in AFSCs increased with fiber size. While the expression of iAF phenotypic marker genes decreased. Such substrate stiffness- and topography-dependent changes of AFSCs was in accordance with the genetic and biochemical distribution of AF tissue from the inner to outer regions. Further, we found that the Yes-associated protein (YAP) was translocated to the nucleus in AFSCs cultured with increasing stiffness and fiber size of scaffolds, yet it remained mostly phosphorylated and cytosolic in cells on soft scaffolds with small fiber size. Inhibition of YAP down-regulated the expression of tendon/ligament-related genes, whereas expression of the cartilage-related genes was upregulated. The results illustrate that matrix stiffness is a potent regulator of AFSC differentiation. Moreover, we reveal that fiber size of scaffolds induced changes in cell adhesions and determined cell shape, spreading area, and extracellular matrix expression. In all, both mechanical property and topography features of scaffolds regulate AFSC differentiation, possibly through a YAP-dependent mechanotransduction mechanism. STATEMENT OF SIGNIFICANCE: Physical cues such as mechanical properties, topographical and geometrical features were shown to profoundly impact the growth and differentiation of cultured stem cells. Previously, we have found that the differentiation of annulus fibrosus-derived stem cells (AFSCs) could be regulated by the stiffness of scaffold. In this study, we fabricated four types of poly(ether carbonate urethane)urea (PECUU) scaffolds with controlled stiffness and fiber size to explore the potential of induced differentiation of AFSCs. We found that AFSCs are able to present different gene expression patterns simply as a result of the stiffness and fiber size of scaffold material. This work has, for the first time, demonstrated that larger-sized and higher-stiffness substrates increase the amount of vinculin assembly and activate YAP signaling in pre-differentiated AFSCs. The present study affords an in-depth comprehension of materiobiology, and be helpful for explain the mechanism of YAP mechanosensing in AF in response to biophysical effects of materials.