Interaction of ZnO nanoparticles with microbes--a physio and biochemical assay

Phytosynthesis of zinc oxide nanoparticles for enhanced antioxidant, antibacterial, and photocatalytic properties: A greener approach to environmental sustainability

Multifunctional nanoparticles (NPs) production from phytochemicals is a sustainable process and an eco-friendly method, and this technique has a variety of uses. To accomplish this, we developed zinc oxide nanoparticles (ZnONPs) using the medicinal plant Tinospora cordifolia (TC). Instruments such as UV-Vis, XRD, FTIR, FE-SEM with EDX, and high-resolution TEM were applied to characterize the biosynthesized TC-ZnONPs. According to the UV-vis spectra, the synthesized TC-ZnONPs absorb at a wavelength centered at 374 nm, which corresponds to a 3.2 eV band gap. HRTEM was used to observe the morphology of the particle surface and the actual size of the nanostructures. TC-ZnONPs mostly exhibit the shapes of rectangles and triangles with a median size of 21 nm. The XRD data of the synthesized ZnONPs exhibited a number of peaks in the 2θ range, implying their crystalline nature. TC-ZnONPs proved remarkable free radical scavenging capacity on DPPH (2,2-Diphenyl-1-picrylhydrazyl), ABTS (2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid), and NO (Nitric Oxide). TC-ZnONPs exhibited dynamic anti-bacterial activity through the formation of inhibition zones against Pseudomonas aeruginosa (18 ± 1.5 mm), Escherichia coli (18 ± 1.0 mm), Bacillus cereus (19 ± 0.5 mm), and Staphylococcus aureus (13 ± 1.1 mm). Additionally, when exposed to sunlight, TC-ZnONPs show excellent photocatalytic ability towards the degradation of methylene blue (MB) dye. These findings suggest that TC-ZnONPs are potential antioxidant, antibacterial, and photocatalytic agents.

Unleashing the promise of emerging nanomaterials as a sustainable platform to mitigate antimicrobial resistance

The emergence and spread of antibiotic-resistant (AR) bacterial strains and biofilm-associated diseases have heightened concerns about exploring alternative bactericidal methods. The WHO estimates that at least 700 000 deaths yearly are attributable to antimicrobial resistance, and that number could increase to 10 million annual deaths by 2050 if appropriate measures are not taken. Therefore, the increasing threat of AR bacteria and biofilm-related infections has created an urgent demand for scientific research to identify novel antimicrobial therapies. Nanomaterials (NMs) have emerged as a promising alternative due to their unique physicochemical properties, and ongoing research holds great promise for developing effective NMs-based treatments for bacterial and viral infections. This review aims to provide an in-depth analysis of NMs based mechanisms combat bacterial infections, particularly those caused by acquired antibiotic resistance. Furthermore, this review examines NMs design features and attributes that can be optimized to enhance their efficacy as antimicrobial agents. In addition, plant-based NMs have emerged as promising alternatives to traditional antibiotics for treating multidrug-resistant bacterial infections due to their reduced toxicity compared to other NMs. The potential of plant mediated NMs for preventing AR is also discussed. Overall, this review emphasizes the importance of understanding the properties and mechanisms of NMs for the development of effective strategies against antibiotic-resistant bacteria.

Biosurfactant-capped CuO nanoparticles coated cotton/polypropylene fabrics toward antimicrobial textile applications

The global COVID-19 pandemic has led to an increase in the importance of implementing effective measures to prevent the spread of microorganisms. Consequently, there is a growing demand for antimicrobial materials, specifically antimicrobial textiles and face masks, because of the surge in diseases caused by bacteria and viruses like SARS-CoV-2. Face masks that possess built-in antibacterial properties can rapidly deactivate microorganisms, enabling reuse and reducing the incidence of illnesses. Among the numerous types of inorganic nanomaterials, copper oxide nanoparticles (CuO NPs) have been identified as cost-effective and highly efficient antimicrobial agents for inactivating microbes. Furthermore, biosurfactants have recently been recognized for their potential antimicrobial effects, in addition to inorganic nanoparticles. Therefore, this research's primary focus is synthesizing biosurfactant-mediated CuO NPs, integrating them into natural and synthetic fabrics such as cotton and polypropylene and evaluating the resulting fabrics' antimicrobial activity. Using rhamnolipid (RL) as a biosurfactant and employing a hydrothermal method with a pH range of 9-11, RL-capped CuO NPs are synthesized (RL-CuO NPs). To assess their effectiveness against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) microorganisms, the RL-CuO NPs are subjected to antibacterial testing. The RL-capped CuO NPs exhibited antimicrobial activity at much lower concentrations than the individual RL, CuO. RL-CuO NPs have shown a minimum inhibitory concentration (MIC) of 1.2 mg ml-1and minimum bactericidal concentration (MBC) of 1.6 mg ml-1forE. coliand a MIC of 0.8 mg ml-1and a MBC of 1.2 mg ml-1forS. aureus, respectively. Furthermore, the developed RL-CuO NPs are incorporated into cotton and polypropylene fabrics using a screen-printing technique. Subsequently, the antimicrobial activity of the coated fabrics is evaluated, revealing that RL-CuO NPs coated fabrics exhibited remarkable antibacterial properties against both gram-positive and gram-negative bacteria.

Functional fluorescent nanomaterials for the detection, diagnosis and control of bacterial infection and biofilm formation: Insight towards mechanistic aspects and advanced applications

Infectious diseases resulting from the high pathogenic potential of several bacteria possesses a major threat to human health and safety. Traditional methods used for screening of these microorganisms face major issues with respect to detection time, selectivity and specificity which may delay treatment for critically ill patients past the optimal time. Thus, a convincing and essential need exists to upgrade the existing methodologies for the fast detection of bacteria. In this context, increasing number of newly emerging nanomaterials (NMs) have been discovered for their effective use and applications in the area of diagnosis in bacterial infections. Recently, functional fluorescent nanomaterials (FNMs) are extensively explored in the field of biomedical research, particularly in developing new diagnostic tools, nanosensors, specific imaging modalities and targeted drug delivery systems for bacterial infection. It is interesting to note that organic fluorophores and fluorescent proteins have played vital role for imaging and sensing technologies for long, however, off lately fluorescent nanomaterials are increasingly replacing these due to the latter's unprecedented fluorescence brightness, stability in the biological environment, high quantum yield along with high sensitivity due to enhanced surface property etc. Again, taking advantage of their photo-excitation property, these can also be used for either photothermal and photodynamic therapy to eradicate bacterial infection and biofilm formation. Here, in this review, we have paid particular attention on summarizing literature reports on FNMs which includes studies detailing fluorescence-based bacterial detection methodologies, antibacterial and antibiofilm applications of the same. It is expected that the present review will attract the attention of the researchers working in this field to develop new engineered FNMs for the comprehensive diagnosis and treatment of bacterial infection and biofilm formation.

Photocatalytic microbial disinfection under indoor conditions: Prospects and challenges of near IR-photoactive materials

The accumulation of microbes especially in the air and in water bodies is causing the major disease outbreaks. Indoor environment remediation methods are necessary today to clean up these microbes. Among the remediation methods available, in situ generation of highly reactive and oxidizing radical species by advanced oxidation processes (AOPs) inactivate most of the microbes unselectively. Of these AOPs, photocatalytic microbial disinfection especially under indoor conditions is of great interest to maintain microbe-free indoor environment. For efficient microbes' inactivation under indoor conditions, the near IR and IR response of the photocatalysts must be improved. Though the photocatalytic disinfection of microbes using semiconductor-based photocatalysts has been extensively investigated, most of the photocatalysts that have been investigated are either weekly responsive or totally not irresponsive to IR photons due to inappropriate bandgap energies. Several strategies have been investigated to enhance the light harvesting properties of semiconductor based photocatalysts under indoor conditions and make them active to near IR and IR radiations. This review summarizes the recent progress in the field of materials for photocatalysts employed for microbial removal in indoor environments over the past decade as well as outlines key perspectives to enlighten future researches. The paper details the fundamentals of photocatalysis and basic properties of photocatalytic materials in the disinfection of common microbes under indoor conditions. The applications of photocatalytic materials in the disinfection of microbes in indoor environmental conditions are discussed and reviewed. Finally, the remaining challenges and future strategies/prospects in the design and synthesis of IR (and near IR) responsive photocatalysts are discussed.

Polysaccharide-based nanoassemblies: From synthesis methodologies and industrial applications to future prospects

Polysaccharides, due to their remarkable features, have gained significant prominence in the sustainable production of nanoparticles (NPs). High market demand and minimal production cost, compared to the chemically synthesised NPs, demonstrate a drive towards polysaccharide-based nanoparticles (PSNPs) benign to environment. Various approaches are used for the synthesis of PSNPs including cross-linking, polyelectrolyte complexation, and self-assembly. PSNPs have the potential to replace a wide diversity of chemical-based agents within the food, health, medical and pharmacy sectors. Nevertheless, the considerable challenges associated with optimising the characteristics of PSNPs to meet specific targeting applications are of utmost importance. This review provides a detailed compilation of recent accomplishments in the synthesis of PSNPs, the fundamental principles and critical factors that govern their rational fabrication, as well as various characterisation techniques. Noteworthy, the multiple use of PSNPs in different disciplines such as biomedical, cosmetics agrochemicals, energy storage, water detoxification, and food-related realms, is accounted in detail. Insights into the toxicological impacts of the PSNPs and their possible risks to human health are addressed, and efforts made in terms of PSNPs development and optimising strategies that allow for enhanced delivery are highlighted. Finally, limitations, potential drawbacks, market diffusion, economic viability and future possibilities for PSNPs to achieve widespread commercial use are also discussed.

Transition metal-based nanoparticles as potential antimicrobial agents: recent advancements, mechanistic, challenges, and future prospects

Bacterial transmission is considered one of the potential risks for communicable diseases, requiring promising antibiotics. Traditional drugs possess a limited spectrum of effectiveness, and their frequent administration reduces effectiveness and develops resistivity. In such a situation, we are left with the option of developing novel antibiotics with higher efficiency. In this regard, nanoparticles (NPs) may play a pivotal role in managing such medical situations due to their distinct physiochemical characteristics and impressive biocompatibility. Metallic NPs are found to possess extraordinary antibacterial effects that are useful in vitro as well as in vivo as self-modified therapeutic agents. Due to their wide range of antibacterial efficacy, they have potential therapeutic applications via diverse antibacterial routes. NPs not only restrict the development of bacterial resistance, but they also broaden the scope of antibacterial action without binding the bacterial cell directly to a particular receptor with promising effectiveness against both Gram-positive and Gram-negative microbes. This review aimed at exploring the most relevant types of metal NPs employed as antimicrobial agents, particularly those based on Mn, Fe, Co, Cu, and Zn metals, and their antimicrobial mechanisms. Further, the challenges and future prospects of NPs in biological applications are also discussed.

The impact of biosynthesized ZnO nanoparticles from Olea europaea (Common Olive) on Pseudomonas aeruginosa growth and biofilm formation

There is a limitation in the range of effectual antibiotics due to the Pseudomonas aeruginosa (PA) infection due to its innate antimicrobial resistance. Researchers have therefore been concentrating their efforts to discover advanced and cost effective antibacterial agents among the ever-increasing PA bacterial resistance strains. It has been discovered that various nanoparticles can be employed as antimicrobial agents. Here, we evaluated the antibacterial properties of the Zinc Oxide nanoparticles (ZnO NPs), which was biosynthesized, being examined on six hospital strains of PA alongside a reference strain (ATCC 27853). A chemical approach was applied to biosynthesize the ZnO NPs from Olea europaea was performed, and confirmed by using X-ray diffraction and Scanning Electron Microscopes. The nanoparticles then applied their antibacterial properties to examine them against six clinically isolated PA strains alongside the reference strain. This process tested for the results of the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC). The Growth, biofilm formation and eradication were analyzed. The influence of the differentiating degrees ZnO NPs in regard to Quorom sensing gene expression were further examined. The ZnO NPs exhibited a crystalline size and diameter (Dc) of 40–60 nm and both the MIC and MBC tests revealed positive outcomes of concentrations of 3 and 6 mg/ml for each PA strain, respectively. At sub inhibitory concentration, The ZnO NPs were found to significantly inhibit the growth and biofilm formation of all PA strains and decreases in the biomass and metabolic behavior of PA established biofilms; these decreases varied depending on the dosage. At ZnO NPs concentrations of 900 µg/ml, the expression of majority of quorum sensing genes of all strains were significantly reduced, at ZnO NPs concentrations of 300 µg/ml, few genes were significantly impacted. In conclusion, the treatment of PA and could be other antibiotic resistant bacteria can therefore be approached by using ZnO NPs as it has been uncovered that they withhold advanced antibacterial properties.

Synthesis and Spectral Characterisation of Fabricated Cerium-Doped Magnesium Oxide Nanoparticles: Evaluation of the Antimicrobial Potential and Its Membranolytic Activity through Large Unilamellar Vesicles

Considerable attention has been given to Magnesium oxide nanoparticles lately due to their antimicrobial potential, low toxicity to humans, high thermal stability, biocompatibility, and low cost of production. However, their successful transformation into sustainable drugs is limited due to their low membrane permeability, which reduces their bioavailability in target cells. Herein we propose Cerium-doped magnesium oxide nanoparticles (MgOCeNPs) as a powerful solution to above mentioned limitations and are compared with MgO NPs for their membrane permeability and antimicrobial activity. Both pure and Ce-doped were characterized by various spectroscopic and microscopic techniques, in which an X-ray diffraction (XRD) examination reveals the lattice patterns for doped nanoparticles. Furthermore, Atomic Force Microscopy (AFM) revealed the three-dimensional (3D) structure and height of the nanoparticle. The crystal structure (FCC) of MgO did not change with Ce doping. However, microstructural properties like lattice parameter, crystallite size and biological activity of MgO significantly changed with Ce doping. In order to evaluate the antimicrobial potential of MgOCeNPs in comparison to MgO NPs and to understand the underlying mechanisms, the antibacterial activity was investigated against human pathogenic bacteria E. coli and P. aeruginosa, and antifungal activity against THY-1, a fungal strain. MgOCeNPs were studied by several methods, which resulted in a strong antibacterial and antifungal activity in the form of an elevated zone of inhibition, reduced growth curve, lower minimum inhibitory concentration (MIC₈₀) and enhanced cytotoxicity in both bacterial and fungal strain as compared to MgO nanoparticles. The study of the growth curve showed early and prolonged stationary phase and early decline log phase. Both bacterial and fungal strains showed dose-dependent cytotoxicity with enhancement in intracellular reactive oxygen species (ROS) generation and formation of pores in the membrane when interacting with egg-phosphatidylcholine model Large Unilamellar Vesicles (LUVs). The proposed mechanism of MgOCeNPs toxicity evidently is membranolytic activity and induction of ROS production, which may cause oxidative stress-mediated cytotoxicity. These results confirmed that MgOCeNPs are a novel and very potent antimicrobial agent with a great promise of controlling and treating other microbes.

In situ facile green synthesis of Ag-ZnO nanocomposites using Tetradenia riperia leaf extract and its antimicrobial efficacy on water disinfection

In this work, Ag–ZnO nanocomposites were prepared by a green synthesis route using aqueous leaf extract of Tetradenia riperia and investigated for antibacterial activity against Escherichia coli and Staphylococcus aureus. To optimize the synthesis of the Ag–ZnO, the effects of precursor concentrations, pH, and temperatures were studied. The Ag–ZnO nanocomposites were characterized by XRD, ATR-FTIR, FESEM, and TEM. Results show that the concentration of 8% Ag, the temperature of 80 °C, and a pH of 7–8 were optimal for the synthesis of Ag–ZnO nanocomposites. The XRD analysis showed the decrease in particle size of Ag–ZnO from 23.6 to 14.8 nm with an increase in Ag concentrations, which was further supported by FESEM analysis. TEM image of 8% Ag provides more information on the coexistence of Ag on ZnO where an average particle size of 14.8 nm was determined. The ATR-FTIR analysis confirmed the presence of phenolic compounds, which work as reducing and stabilizing agents. The antimicrobial activity results show that Ag–ZnO nanocomposite demonstrated a higher antimicrobial potency on E. coli than on S. aureus. Therefore, Tetradenia riperia leaf extract is a viable route for the synthesis of Ag–ZnO nanocomposites to be used for various applications, including water disinfection.

Optimization of Technological Parameters of the Process of Forming Therapeutic Biopolymer Nanofilled Films

The prospects of using biopolymer nano-containing films for wound healing were substantiated. The main components of biopolymer composites are gelatin, polyvinyl alcohol, glycerin, lactic acid, distilled water, and zinc oxide (ZnO) nanoparticles (NPs). Biopolymer composites were produced according to various technological parameters using a mould with a chrome coating. The therapeutic properties of biopolymer films were evaluated by measuring the diameter of the protective effect. Physico-mechanical properties were studied: elasticity, vapour permeability, degradation time, and swelling. To study the influence of technological parameters of the formation process of therapeutic biopolymer nanofilled films on their therapeutic and physico-mechanical properties, the planning of the experiment was used. According to the results of the experiments, mathematical models of the second-order were built. The optimal values of technological parameters of the process are determined, which provide biopolymer nanofilled films with maximum healing ability (diameter of protective action) and sufficiently high physical and mechanical properties: elasticity, vapour permeability, degradation time and swelling. The research results showed that the healing properties of biopolymer films mainly depend on the content of ZnO NPs. Degradation of these biopolymer films provides dosed drug delivery to the affected area. The products of destruction are carbon dioxide, water, and a small amount of ZnO in the bound state, which indicates the environmental safety of the developed biopolymer film.

Sustained Biotic-Abiotic Hybrids Methanogenesis Enabled Using Metal-Free Black Phosphorus/Carbon Nitride

Biotic-abiotic hybrid systems (BAHs) constructed by integrating biological methanogens with photocatalysts offer novel approaches for the effective solar-driven conversion of CO2 to CH4, providing significant inspiration for achieving carbon neutrality and alleviating the energy crisis. As metal photocatalysts would cause photocorrosion that damages microbial cells and lead to system imbalance. Therefore, exploring suitable metal-free photocatalysts is of particular importance in the search for more efficient and sustainable BAHs to improve the actual operability and applicability. Herein, black phosphorus/carbon nitride (BPCNx) as an alternative metal-free heterostructure was combined with Methanosarcina barkeri (M. barkeri) to construct M. barkeri-BPCNx hybrid systems, and their cyclic methanogenesis performance was investigated. Our results demonstrated that BPCNx promotes the separation of photogenerated charges and enhances the quantum yield, providing a sustained energy source for the cyclically driven M. barkeri reduction of CO2 to CH4 under visible light. Our system achieved a total CH4 yield of 1087.45 ± 29.14 μmol gcat–1 after three cycles, 1.96 times higher than that of M. barkeri-Ni@CdS. M. barkeri-BPCNx overcame the defects of the metal photocatalyst and kept cell permeability, achieving cyclic stability and effectively maintaining the activity of M. barkeri. These results highlight the viable role of BPCNx as a metal-free photocatalysts in the construction of BAHs for the sustained and efficient methanation of CO2, which is conducive to the development of an environmentally-friendly, low-cost, and efficient strategy for the conversion of CO2 to CH4.

Application of antibacterial nanoparticles in orthodontic materials

During the orthodontic process, increased microbial colonization and dental plaque formation on the orthodontic appliances and auxiliaries are major complications, causing oral infectious diseases, such as dental caries and periodontal diseases. To reduce plaque accumulation, antimicrobial materials are increasingly being investigated and applied to orthodontic appliances and auxiliaries by various methods. Through the development of nanotechnology, nanoparticles (NPs) have been reported to exhibit excellent antibacterial properties and have been applied in orthodontic materials to decrease dental plaque accumulation. In this review, we present the current development, antibacterial mechanisms, biocompatibility, and application of antibacterial NPs in orthodontic materials.

Facet-Dependent Bactericidal Activity of Ag3PO4 Nanostructures against Gram-Positive/Negative Bacteria

Ag₃PO₄ nanostructures (APNs) containing silver (Ag metal; of the noble metal families) have the potential to exhibit enzyme-mimetic activity. A nanostructure shape, including its surface facets, can improve the bioactivity of enzyme mimicry, yet the molecular mechanisms remain unclear. Herein, we report facet-dependent peroxidase and oxidase-like activity of APNs with both antibacterial and biofilm degrading properties through the generation of reactive oxygen species. Cubic APNs had superior antibacterial effects than rhombic dodecahedral shapes when inhibiting Gram-positive and Gram-negative bacterial pathogen proliferation and biofilm degradation. A similar performance was observed for rhombic dodecahedral shapes, being greater than tetrahedral-shaped APNs. The extent of enzyme-mimetic activity is attributed to the facets {100} present in cubic APNs that led the peroxide radicals to inhibit the proliferation of bacteria and degrade biofilm. These facets were compared to rhombic dodecahedral APNs {110} and tetrahedral APNs {111}, respectively, to reveal a facet-dependent enhanced antibacterial activity, providing a plausible mechanism for shape-dependent APNs material enzyme-mimetic effects on bacteria. Thus, our research findings can provide a direction to optimize bactericidal materials using APNs in clinically relevant applications.

Response behavior of antibiotic resistance genes to zinc oxide nanoparticles in cattle manure thermophilic anaerobic digestion process: A metagenomic analysis

This work investigated the metagenomics-based behavior of antibiotic resistance genes (ARGs) during cattle manure anaerobic digestion with zinc oxide nanoparticles (ZnO NPs) that are commonly used as animal feed additives. The 6.6% decrease in total ARGs abundance while remained unchanged ARGs diversity with ZnO NPs (5 mg/g total solid), suggested ZnO NPs may mitigate ARGs risk by abundance. Also, ZnO NPs affected ARGs with mechanisms specifically of antibiotic inactivation and antibiotic target change, and declined potential hosts' abundance (bacterial genus Ruminiclostridium, Riminococcus, and Paenibacillus) which mainly contributed to the decreased ARGs' abundance. Besides, microbial chemotaxis decreased by 17% with ZnO NPs compared to that without nanoparticles indicated a depression on potential hosts, who could develop the mechanism to adapt to altered digestion conditions, which probably inhibited the ARGs' propagation. These findings are important to promote understanding of the potential ARGs risks in treatments of livestock wastes containing animal feed additives.

Antimicrobial Resistance and Inorganic Nanoparticles

Antibiotics are being less effective, which leads to high mortality in patients with infections and a high cost for the recovery of health, and the projections that are had for the future are not very encouraging which has led to consider antimicrobial resistance as a global health problem and to be the object of study by researchers. Although resistance to antibiotics occurs naturally, its appearance and spread have been increasing rapidly due to the inappropriate use of antibiotics in recent decades. A bacterium becomes resistant due to the transfer of genes encoding antibiotic resistance. Bacteria constantly mutate; therefore, their defense mechanisms mutate, as well. Nanotechnology plays a key role in antimicrobial resistance due to materials modified at the nanometer scale, allowing large numbers of molecules to assemble to have a dynamic interface. These nanomaterials act as carriers, and their design is mainly focused on introducing the temporal and spatial release of the payload of antibiotics. In addition, they generate new antimicrobial modalities for the bacteria, which are not capable of protecting themselves. So, nanoparticles are an adjunct mechanism to improve drug potency by reducing overall antibiotic exposure. These nanostructures can overcome cell barriers and deliver antibiotics to the cytoplasm to inhibit bacteria. This work aims to give a general vision between the antibiotics, the nanoparticles used as carriers, bacteria resistance, and the possible mechanisms that occur between them.

Biofilm-Resistant Nanocoatings Based on ZnO Nanoparticles and Linalool

Biofilms represent an increasing challenge in the medical practice worldwide, imposing a serious threat to public health. As bacterial strains have developed antibiotic resistance, researcher’s attention has been extensively focused on developing more efficient antimicrobial strategies. In this context, the present study reports the synthesis, physicochemical characterization, ex vivo biodistribution, and in vitro evaluation of the capacity of nanostructured surfaces based on zinc oxide (ZnO) and biologically active molecules to modulate clinically relevant microbial biofilms. ZnO nanoparticles (NPs) were synthesized through a co-precipitation method without thermal treatment. The matrix-assisted pulsed laser evaporation (MAPLE) was applied for preparing nanostructured coatings based on ZnO NPs surface modified with linalool that were further characterized by X-ray diffraction (XRD), thermogravimetric analysis with differential scanning calorimetry (TGA-DSC), scanning electron microscopy (SEM), transmission electron microscopy with selected area electron diffraction (TEM-SAED), Fourier-transform infrared spectroscopy (FT-IR), and infrared microscopy (IRM). Histological analyses carried out at 7 days and 14 days after the intraperitoneal administration of linalool modified ZnO NPs revealed the absence of the latter from the brain, kidney, liver, lung, myocardium, and pancreas. Through in vitro assays on prokaryotic cells, it was proven that ZnO coatings hinder microbial biofilm formation of both Gram-positive and Gram-negative bacteria strains.

Bioinspired Green Synthesis of Zinc Oxide Nanoparticles from a Native Bacillus cereus Strain RNT6: Characterization and Antibacterial Activity against Rice Panicle Blight Pathogens Burkholderia glumae and B. gladioli

Burkholderia glumae and B. gladioli are seed-borne rice pathogens that cause bacterial panicle blight (BPB) disease, resulting in huge rice yield losses worldwide. However, the excessive use of chemical pesticides in agriculture has led to an increase in environmental toxicity. Microbe-mediated nanoparticles (NPs) have recently gained significant attention owing to their promising application in plant disease control. In the current study, we biologically synthesize zinc oxide nanoparticles (ZnONPs) from a native Bacillus cereus RNT6 strain, which was taxonomically identified using 16S rRNA gene analysis. The biosynthesis of ZnONPs in the reaction mixture was confirmed by using UV-Vis spectroscopy. Moreover, XRD, FTIR, SEM-EDS, and TEM analysis revealed the functional groups, crystalline nature, and spherical shape of ZnONPs with sizes ranging from 21 to 35 nm, respectively. Biogenic ZnONPs showed significant antibacterial activity at 50 µg mL-1 against B. glumae and B. gladioli with a 2.83 cm and 2.18 cm zone of inhibition, respectively, while cell numbers (measured by OD600) of the two pathogens in broth culture were reduced by 71.2% and 68.1%, respectively. The ultrastructure studies revealed the morphological damage in ZnONPs-treated B. glumae and B. gladioli cells as compared to the corresponding control. The results of this study revealed that ZnONPs could be considered as promising nanopesticides to control BPB disease in rice.

A mechanistic perspective on targeting bacterial drug resistance with nanoparticles

Bacterial infections are an important cause of mortality worldwide owing to the prevalence of drug resistant bacteria. Bacteria develop resistance against antimicrobial drugs by several mechanisms such as enzyme inactivation, reduced cell permeability, modifying target site or enzyme, enhanced efflux because of high expression of efflux pumps, biofilm formation or drug-resistance gene expression. New and alternative ways such as nanoparticle (NP) applications are being established to overcome the growing multidrug-resistance in bacteria. NPs have unique antimicrobial characteristics that make them appropriate for medical application to overcome antibiotic resistance. The proposed antibacterial mechanisms of NPs are cell membrane damage, changing cell wall penetration, reactive oxygen species (ROS) production, effect on DNA and proteins, and impact on biofilm formation. The present review mainly focuses on discussing various mechanisms of bacterial drug resistance and the applications of NPs as alternative antibacterial systems. Combination therapy of NPs and antibiotics as a novel approach in medicine towards antimicrobial resistance is also discussed.

Nanoparticles as antimicrobial and antiviral agents: A literature-based perspective study

The scientific explorations of nanoparticles for their inherent therapeutic potencies as antimicrobial and antiviral agents due to increasing incidences of antibiotic resistance have gained more attention in recent time. This factor amongst others necessitates the search for newer and more effective antimicrobial agents. Several investigations have demonstrated the prospects of nanoparticles in the treatment of various microbial infections. The therapeutic applications of nanoparticles as either delivery agent or broad spectrum inhibition agents in viral and microbial investigations can no longer be overlooked. Their large surface area to volume ratio made them an indispensable substance as delivery agents in many respect. Various materials have been used for the synthesis of nanoparticles with unique properties channelised to meet specific therapeutic requirement. This review focuses on the antibacterial, antifungal, and antiviral potential of nanoparticles with their probable mechanism of action.

Antibacterial properties of recoverable CuZnO@Fe3O4@GO composites in water treatment

The growth of bacteria will lead to water quality deterioration and equipment damage. Therefore, it is necessary to control the growth and reproduction of microorganisms in water treatment. A new type of magnetic recoverable CuZnO@Fe3O4@GO composites was prepared by ultrasonic method, and the composites were characterized and analyzed by SEM, TEM, XPS, and other methods. The optimum mass ratio of composites was determined by orthogonal experiment, and the antibacterial properties and mechanism of the composite were investigated by gram-positive bacteria Staphylococcus aureus and gram-negative bacteria Escherichia coli. Finally, the antibacterial properties of the composites in the effluent of the secondary sedimentation tank were researched. It was shown that the optimum mass ratio of the composites was GO:Fe3O4:CuZnO =1:2:3. When the dosage of composites was 180 mg L-1 and the action time was 100 min, the antibacterial rate against S. aureus and E. coli reached more than 99.5%. The composites could destroy the cell structure of two kinds of bacteria, increase the content of active oxygen in bacteria cells, and enhance the leakage rate of protein by more than 9 times in 150 min, thereby causing the death of the bacteria. And the antibacterial rate of the composites in effluent of the secondary sedimentation tank could reach 99%, and the magnetic recovery rate could reach more than 98%. After 5 cycles of use, the antibacterial rate could still exceed 90%.

Degradation of subµ-sized bioplastics by clinically important bacteria under sediment and seawater conditions: Impact on the bacteria responses

In this study, we investigated the interaction of submicron-sized bioplastics with environmentally and clinically important bacteria under seawater and sediment conditions. To examine the relationship between submicron-sized bioplastics and bacteria in seawater and sediment, we focused on the bacterial activation and their biochemical key events toward the protein, carbohydrate, lipid, and antioxidant response. In addition, culture-dependent biofilm formation on submicron-sized bioplastics and their characterization was performed. The results indicated that selected bacteria increased their viability both in seawater and sediment with the submicron-sized bioplastics in that the bioplastics decreased their mass at the level of 10-23%. However, the activation level and mechanism affected the polymer type, bacteria, and environmental media, and submicron-sized bioplastics promoted biofilm formation with enhancing basophilic characteristics of biofilms.

Age-related physicochemical differences in ZnO nanoparticles in the seawater and their bacterial interaction

To assess the fate and behavior of engineered nanoparticles in the environment, it is important to examine the physicochemical and toxicological transformation of nanoparticles as they age in seawater. In this study, we investigated how aging and seawater conditions altered the physiochemical structure of nanoparticles and affected their interactions with bacteria. For this purpose, zinc oxide nanoparticles were aged under different seawater conditions by keeping them in 1%, 10%, and 100% seawater for 1 day and 20 days. The main physicochemical parameters (surface chemistry, chemical composition, particle size, and zeta potential) and toxicity of aged nanoparticles towards gram-negative Pseudomonas aeruginosa and gram-positive Staphylococcus aureus were examined. The results indicated that aged zinc oxide nanoparticles in various concentrations of seawater changed their surface chemistry, chemical composition, particle size, and zeta potentials. Growth inhibition results were observed in that the inhibition of gram-negative (Pseudomonas aeruginosa) bacteria was higher compared with the gram-positive (Staphylococcus aureus) bacteria, and Staphylococcus aureus activated with the aged zinc oxide nanoparticles. Also, the results showed that the key biochemical factors affected by the aging and seawater concentration.

Pathogenic Escherichia coli (E. coli) detection through tuned nanoparticles enhancement study

OBJECTIVE

This study aims to detect pathogenic Escherichia coli (E. coli) bacteria using non-destructive fluorescence microscopy and micro-Raman spectroscopy.

RESULTS

Raman vibrational spectroscopy provides additional information regarding biochemical changes at the cellular level. We have used two nanomaterials zinc oxide nanoparticles (ZnO-NPs) and gold nanoparticles (Au-NPs) to detect pathogenic E. coli. The scanning electron microscope (SEM) with energy dispersive X-ray (EDAX) spectroscopy exhibit surface morphology and the elemental composition of the synthesized NPs. The metal NPs are useful contrast agents due to the surface plasmon resonance (SPR) to detect the signal intensity and hence the bacterial cells. The changes due to the interaction between cells and NPs are further correlated to the change in the surface charge and stiffness of the cell surface with the help of the fluorescence microscopic assay.

CONCLUSIONS

We conclude that when two E. coli strains (MTCC723 and MTCC443) and NPs are respectively mixed and kept overnight, the growth of bacteria are inhibited by ZnO-NPs due to changes in cell membrane permeability and intracellular metabolic system under fluorescence microscopy. However, SPR possessed Au-NPs result in enhanced fluorescence of both pathogens. In addition, with the help of Raman microscopy and element analysis, significant changes are observed when Au-NPs are added with the two strains as compared to ZnO-NPs due to protein, lipid and DNA/RNA induced conformational changes.

Bacterial interactions of microplastics extracted from toothpaste under controlled conditions and the influence of seawater

Microplastics have become a global concern due to their increasing use and discharge into the environment. These ubiquitous particles are known to have extremely low degradation rates and accumulate mostly in the marine environment. The evidence for bioaccumulation and indicators of stress linked to microplastics is also stated in the literature. However, the real environmental impact of microplastics has not yet been revealed. Therefore, it is crucial to understand the interaction mechanisms between microplastics and (micro)organisms under controlled (standard) laboratory conditions and environmentally relevant conditions to reflect the true environmental -situation. In this study, we aimed to understand how microplastics extracted from commercially available toothpaste samples interacted with four types of bacteria under both standard and seawater conditions. For this purpose, bacterial inhibitions were examined, and mechanisms of inhibition were evaluated by biochemical parameters (total protein, lipid peroxidase, total antioxidant capacity, and extracellular carbohydrate levels) of bacteria and physicochemical properties (zeta potential, particle size, surface chemistry) of microplastics. Results showed that gram-positive Bacillus subtilis and gram-negative Pseudomonas aeruginosa were affected in controlled and sea water media, respectively. The inhibition of the bacteria relied on the high zeta potentials of the microplastics, and, biochemically, protein and lipid peroxidase activity of bacteria were important in both media. On the other hand, while biochemical responses were similar in both media, the difference between the cell wall and microplastics surface charge was important only in seawater.

An insight into the dependency on sample preparation for (eco) toxicity assessment of TiO2 nanoparticles

Assessing the environmental hazard of nanoparticles can be a challenging task using various testing strategies. However, to our knowledge, no information is available about the impact of the sample preparation on the toxicity and toxicity mechanism of nanoparticles. For this aim, three sample preparation methods and their available toxicity procedures were conducted to examine the (eco) toxicity of TiO₂ nanoparticles using bacteria model system. To detail understanding of the effect of sample preparation, the key events on the inhibition were examined by physicochemical and antioxidant responses. The findings showed that the physicochemical and toxicological behavior of the tested TiO₂ NPs varied according to the sample preparation method.

Nanoparticles at biointerfaces: Antibacterial activity and nanotoxicology

Development of a biomaterial that is resistant to the adhesion and consequential proliferation of bacteria, represents a significant challenge in terms of application of such materials in various aspects of health care. Over recent years a large number of synthetic methods have appeared with the overall goal of the prevention of bacterial adhesion to surfaces. In contrast to these artificial techniques, living organisms over millions of years have developed different systems to prevent the colonization of microorganisms. Recently, these natural approaches, which are based on surface nanotopography, have been mimicked to fabricate a modern antibacterial surface. In this vein, use of nanoparticle (NP) technology has been explored in order to create a suitable antibacterial surface. However, few studies have focused on the toxicity of these techniques and the ecotoxicity of NP materials on mammalian and bacterial cells simultaneously. Researchers have observed that the majority of previous studies have demonstrated some of the extents of the harmful impacts on mammalian cells. Here, we provide a critical review of the NP approach to antibacterial surface treatment, and also summarize the studies of toxic effects caused by metal NPs on bacteria and mammalian cells.

Natural drug physcion encapsulated zeolitic imidazolate framework, and their application as antimicrobial agent

In this study, we have encapsulated natural physcion (PHY) drug loading into metal-organic frameworks MOFs, zeolitic imidazolate frameworks (ZIFs) through straight-forward nano-precipitation technique. The synthesized PHY@ZIF-8 indicated high drug loading encapsulation efficiency i.e. 88%, whereas, drug loading capacity was found to be 11.49%. The characterization of PHY loaded-ZIF 8 (PHY@ZIF-8) was carried out by powder x-ray diffraction (PXRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), and FT-IR methods. The release of PHY loaded in ZIF-8 was 88.72% at pH 5.0 which is approximately three time higher than its release in physiological system with pH 7.4 (27.61%). The remarkable stability of PHY@ZIF-8 NPs even after 25 days stem it as an effective and stable candidate. Furthermore, the antibacterial activity of pure PHY, ZIF-8 and PHY@ZIF-8 were investigated against gram negative strains and gram positive strain. The PHY@ZIF-8 showed maximum growth inhibition zones against all microorganism as compare to pure PHY. We hope that this model drug could have the potential ability for treatment of various infectious diseases.

Antibacterial and anticorrosive properties of CuZnO@RGO waterborne polyurethane coating in circulating cooling water

In order to control bacterial adhesion and metal corrosion in the circulating cooling water system, it is necessary to prepare a nanocomposite-modified coating with antibacterial and anticorrosive functions. Copper and zinc composite oxide (CuZnO) was synthesized to prepare CuZnO@RGO nanocomposites. The antibacterial mechanism of CuZnO@RGO nanocomposites was investigated using gram-negative bacteria E. coli and gram-positive bacteria S. aureus as the two model microorganisms. The antibacterial properties of CuZnO@RGO nanocomposites on mixed bacteria were researched in the cooling water system. In addition, the CuZnO@RGO waterborne polyurethane (WPU) composite coating (CuZnO@RGO/WPU) was synthesized. The antibacterial performance, hardness, and corrosion inhibition performance of CuZnO@RGO/WPU composite coating in the cooling water system were also investigated. The results showed that after adding CuZnO@RGO nanocomposites to E. coli or S. aureus suspension, the protein leakage after 20 h was 9.3 times or 7.2 times higher than that in the blank experiment. The antibacterial rate of CuZnO@RGO nanocomposites in circulating cooling water reached 99.70% when the mass fraction of RGO was 15%. When the mass fraction of CuZnO@RGO accounting for CuZnO@RGO/WPU composite coating was 2%, the antibacterial rate, hardness, and corrosion inhibition efficiency were 94.35%, 5H, and 93.30%, respectively.

Size controlled, antimicrobial ZnO nanostructures produced by the microwave assisted route

Zinc oxide nanostructures (ZnO-NS) have shown to be of great value for several biological and biomedical applications. In particular, they have been used in bioimaging and delivery applications as well as inhibitors of microbial growth. In this work a new methodology for producing highly crystalline, size controlled ZnO-NS using a chemical microwave assisted synthetic route is described. A wide range of sizes and shapes of ZnO-NS could be controlled by varying the molar ratio of zinc nitrate to hexamethylenetetramine (HMT) from 3:20 to 30:20. The produced ZnO-NS systematically changed from 25 nm spherical nanoparticles to well-shaped micro sized hexagonal nanorods. Pronounced oxygen defects were also noticed, particularly at higher molar ratios. However, this is not the case with the lattice constant c, whose value is found to decrease by increasing this ratio. The produced ZnO-NS were tested as antimicrobial agent against Gram-negative (E. coli), Gram-positive (B. subtilis) bacteria and yeast (S. cerevisiae). Significant inhibition of these microbial strains was noticed even at low concentrations of ZnO-NS. The ZnO-NS with the molar ratio 3:20 was the most effective against the microbes tested. The results showed 80, 71 and 50% inhibition of E. coli, B. subtilis and S. cerevisiae, respectively. Using the "surfactant stress model" we describe the nanostructure formation of ZnO-NS. The antimicrobial activity of ZnO-NS correlated well with lattice constant c and particle size, where smaller particles with higher value of c displayed increase inhibitory activity. No clear correlation between the oxygen defects and bacterial inhibitions was observed. This highly crystalline, size tunable ZnO-NS could prove to be effective antimicrobial agents at low concentrations (e.g. 20 μg per 10 mL) and might be tested against other microorganisms.

A polyoxometalate-modified magnetic nanocomposite: a promising antibacterial material for water treatment

A polyoxometalate-modified magnetic nanocomposite integrates the double antibacterial effects of both Fe₃O₄ and polyoxometalate, rendering it a promising candidate as an antimicrobial material.

In vitro antibacterial activity of ceftazidime, unlike ciprofloxacin, improves in the presence of ZnO nanofluids under acidic conditions

The development of antibiotic resistance among hospital pathogens has provided a great need for new antimicrobial agents. Zinc oxide nanoparticles (ZnO NPs) in combination with various antibiotics can act as a reducing agent for antibiotic resistance. The aim of this study was to investigate the influence and the mechanism of ZnO NPs on the antimicrobial activity of ciprofloxacin (CP) and ceftazidime (CAZ) against Enterococcus faecalis (E. faecalis) and Acinetobacter baumannii (A. baumannii) bacteria in acidic conditions (pH 5.5). ZnO NPs were synthesised using the solvothermal method and characterised. The MIC90 value of ZnO NPs against A. baumannii was 0.25 mg ml^-1 and its highest growth-inhibitory activity was observed at 0.125 mg ml^-1 for E. faecalis. The Fourier transform infrared spectroscopy spectra of ZnO NPs treated with antibiotics showed the interaction between ZnO NPs and each of the two antibiotics. ZnO NPs at a sub-inhibitory concentration had no effect on the antibacterial activity of CP and CAZ against E. faecalis and CP against A. baumannii. The action mechanism of ZnO NPs for enhancing the antibacterial efficacy of CAZ against A. baumannii was evaluated. ZnO NPs caused to increase in the antibacterial activity of CAZ against A. baumannii, possibly through the release of Zn²⁺ and increasing of membrane permeability.

Photo-triggered antibacterial and anticancer activities of zinc oxide nanoparticles

ZnO nanoparticles (ZnO NPs) have gained more attention in recent years due to their ability to induce the generation of reactive oxygen species (ROS) under light irradiation. Photo-triggered ROS generation by ZnO NPs and the resulting phototoxicity in cells have found use in antibacterial and anticancer applications. This review highlights recent advances in the development of ZnO NPs and hybrid-type functionalized ZnO NPs for photo-triggered antibacterial and anticancer activities. In addition, various chemical modifications including metal doping, metal hybridization, modification with polymers, and sensitization by organic photosensitizers have been further introduced to enhance the photocatalytic efficiency and ROS generation capability of ZnO NPs. The enhanced ROS generation efficiency of modified ZnO NPs consequently increases their antibacterial and anticancer activities. Additionally, we offer some insights into the design and engineering of next-generation ZnO NPs for more effective antibacterial and anticancer applications.

Understanding Mechanism of Photocatalytic Microbial Decontamination of Environmental Wastewater

Several photocatalytic nanoparticles are synthesized and studied for potential application for the degradation of organic and biological wastes. Although these materials degrade organic compounds by advance oxidation process, the exact mechanisms of microbial decontamination remains partially known. Understanding the real mechanisms of these materials for microbial cell death and growth inhibition helps to fabricate more efficient semiconductor photocatalyst for large-scale decontamination of environmental wastewater or industries and hospitals/biomedical labs generating highly pathogenic bacteria and toxic molecules containing liquid waste by designing a reactor. Recent studies on microbial decontamination by photocatalytic nanoparticles and their possible mechanisms of action is highlighted with examples in this mini review.

Application of Nanoparticle Technologies in the Combat against Anti-Microbial Resistance

Anti-microbial resistance is a growing problem that has impacted the world and brought about the beginning of the end for the old generation of antibiotics. Increasingly, more antibiotics are being prescribed unnecessarily and this reckless practice has resulted in increased resistance towards these drugs, rendering them useless against infection. Nanotechnology presents a potential answer to anti-microbial resistance, which could stimulate innovation and create a new generation of antibiotic treatments for future medicines. Preserving existing antibiotic activity through novel formulation into or onto nanotechnologies can increase clinical longevity of action against infection. Additionally, the unique physiochemical properties of nanoparticles can provide new anti-bacterial modes of action which can also be explored. Simply concentrating on antibiotic prescribing habits will not resolve the issue but rather mitigate it. Thus, new scientific approaches through the development of novel antibiotics and formulations is required in order to employ a new generation of therapies to combat anti-microbial resistance.

Interaction of PM2.5 airborne particulates with ZnO and TiO2 nanoparticles and their effect on bacteria

A significant knowledge gap in nanotechnology is the absence of standardized protocols for examining and comparison the effect of metal oxide nanoparticles on different environment media. Despite the large number of studies on ecotoxicity of nanoparticles, most of them disregard the particles physicochemical transformation under real exposure conditions and interaction with different environmental components like air, soil, water, etc. While one of the main exposure ways is inhalation and/or atmosphere for human and environment, there is no investigation between airborne particulates and nanoparticles. In this study, some metal oxide nanoparticle (ZnO and TiO₂) transformation and behavior in PM2.5 air particulate media were examined and evaluated by the influence on nanoparticle physicochemical properties (size, surface charge, surface functionalization) and on bacterium (Gram-positive Bacillus subtilis, Staphylococcus aureus/Gram-negative Escherichia coli, Pseudomonas aeruginosa bacteria) by testing in various concentrations of PM2.5 airborne particulate media to contribute to their environmental hazard and risk assessment in atmosphere. PM2.5 airborne particulate media affected their toxicity and physicochemical properties when compared the results obtained in controlled conditions. ZnO and TiO₂ surfaces were functionalized mainly with sulfoxide groups in PM2.5 air particulates. In addition, tested particles were not observed to be toxic in controlled conditions. However, these were observed inhibition in PM2.5 airborne particulates media by the exposure concentration. These observations and dependence of the bacteria viability ratio explain the importance of particulate matter-nanoparticle interaction.