Polymer encapsulation of CdE (E = S, se) quantum dot ensembles via in-situ radical polymerization in miniemulsion

Correlating semiconductor nanoparticle architecture and applicability for the controlled encoding of luminescent polymer microparticles

Luminophore stained micro- and nanobeads made from organic polymers like polystyrene (PS) are broadly used in the life and material sciences as luminescent reporters, for bead-based assays, sensor arrays, printable barcodes, security inks, and the calibration of fluorescence microscopes and flow cytometers. Initially mostly prepared with organic dyes, meanwhile luminescent core/shell nanoparticles (NPs) like spherical semiconductor quantum dots (QDs) are increasingly employed for bead encoding. This is related to their narrower emission spectra, tuneability of emission color, broad wavelength excitability, and better photostability. However, correlations between particle architecture, morphology, and photoluminescence (PL) of the luminescent nanocrystals used for encoding and the optical properties of the NP-stained beads have been rarely explored. This encouraged us to perform a screening study on the incorporation of different types of luminescent core/shell semiconductor nanocrystals into polymer microparticles (PMPs) by a radical-induced polymerization reaction. Nanocrystals explored include CdSe/CdS QDs of varying CdS shell thickness, a CdSe/ZnS core/shell QD, CdSe/CdS quantum rods (QRs), and CdSe/CdS nanoplatelets (NPLs). Thereby, we focused on the applicability of these NPs for the polymerization synthesis approach used and quantified the preservation of the initial NP luminescence. The spectroscopic characterization of the resulting PMPs revealed the successful staining of the PMPs with luminescent CdSe/CdS QDs and CdSe/CdS NPLs. In contrast, usage of CdSe/CdS QRs and CdSe QDs with a ZnS shell did not yield luminescent PMPs. The results of this study provide new insights into structure-property relationships between NP stained PMPs and the initial luminescent NPs applied for staining and underline the importance of such studies for the performance optimization of NP-stained beads.

Luminescence encoding of polymer microbeads with organic dyes and semiconductor quantum dots during polymerization

Luminescence-encoded microbeads are important tools for many applications in the life and material sciences that utilize luminescence detection as well as multiplexing and barcoding strategies. The preparation of such beads often involves the staining of premanufactured beads with molecular luminophores using simple swelling procedures or surface functionalization with layer-by-layer (LbL) techniques. Alternatively, these luminophores are sterically incorporated during the polymerization reaction yielding the polymer beads. The favorable optical properties of semiconductor quantum dots (QDs), which present broadly excitable, size-tunable, narrow emission bands and low photobleaching sensitivity, triggered the preparation of beads stained with QDs. However, the colloidal nature and the surface chemistry of these QDs, which largely controls their luminescence properties, introduce new challenges to bead encoding that have been barely systematically assessed. To establish a straightforward approach for the bead encoding with QDs with minimized loss in luminescence, we systematically assessed the incorporation of oleic acid/oleylamine-stabilized CdSe/CdS-core/shell-QDs into 0.5-2.5 µm-sized polystyrene (PS) microspheres by a simple dispersion polymerization synthesis that was first optimized with the organic dye Nile Red. Parameters addressed for the preparation of luminophore-encoded beads include the use of a polymer-compatible ligand such as benzyldimethyloctadecylammonium chloride (OBDAC) for the QDs, and crosslinking to prevent luminophore leakage. The physico-chemical and optical properties of the resulting beads were investigated with electron microscopy, dynamic light scattering, optical spectroscopy, and fluorescence microscopy. Particle size distribution, fluorescence quantum yield of the encapsulated QDs, and QD leaking stability were used as measures for bead quality. The derived optimized bead encoding procedure enables the reproducible preparation of bright PS microbeads encoded with organic dyes as well as with CdSe/CdS-QDs. Although these beads show a reduced photoluminescence quantum yield compared to the initially very strongly luminescent QDs, with values of about 35%, their photoluminescence quantum yield is nevertheless still moderate.

Hybrid nanostructures for SERS: materials development and chemical detection

This review focuses on recent developments in hybrid and nanostructured substrates for SERS (surface-enhanced Raman scattering) studies. Thus substrates composed of at least two distinct types of materials, in which one is a SERS active metal, are considered here aiming at their use as platforms for chemical detection in a variety of contexts. Fundamental aspects related to the SERS effect and plasmonic behaviour of nanometals are briefly introduced. The materials described include polymer nanocomposites containing metal nanoparticles and coupled inorganic nanophases. Chemical approaches to tailor the morphological features of these substrates in order to get high SERS activity are reviewed. Finally, some perspectives for practical applications in the context of chemical detection of analytes using such hybrid platforms are presented.

Preparation of quantum dot-embedded polymeric nanoparticles using flash nanoprecipitation

We developed a unique and efficient method to encapsulate quantum dots within amphiphilic polymer micelles using the flash nanoprecipitation technique and various micromixers (multi-inlets vortex mixer, MIVM, and confined impinging-jet mixer, CIJM).

Polymer encapsulation of inorganic nanoparticles for biomedical applications

Hybrid inorganic colloidal particles have attracted a great attention in the last years, and they have been largely used in various applications and more particularly in biomedical nanotechnology. Recently, they are used as carriers for biomolecules, and exploited for use in microsystems, microfluidics and in lab-on-a chip based bionanotechnology. Various kinds of hybrid particles can be listed starting from classical inorganic nanoparticles such as silica, gold, silver, iron oxide and those exhibiting intrinsic properties such as semiconducting nanoparticles (e.g. quantum dots). As a general tendency, to be conveniently used in biomedical applications, the encapsulation of the inorganic nanoparticles in a polymer matrix is incontestably needed. Consequently, various chemistry-based encapsulation processes have been developed and showed promising results as compared to the encapsulation using preformed polymers.

A miniemulsion polymerization technique for encapsulation of silicon quantum dots in polymer nanoparticles

Miniemulsion polymerization techniques were used to encapsulate luminescent alkylated silicon quantum dots (Si-QDs) within polymer nanoparticles composed of styrene and 4-vinylbenzaldehyde monomers. The polymer nanoparticles had mean diameters in the range 90-150 nm depending on the reaction conditions, however all samples showed narrow particle size distributions, as determined by dynamic light scattering and atomic force microscopy. The Si-QDs were found to have a small, but beneficial effect on the polymerization process by reducing the polydispersity of the final polymer particles, which we attribute to co-surfactant action of the undecene used to form the alkyl capping layer on the Si-QDs. Confocal microspectroscopy was used to confirm that the luminescent alkylated Si-QDs were encapsulated within the polymer nanoparticles and also provided luminescence and Raman spectra which show peaks corresponding to both alkylated Si-QDs and the polymer nanoparticles. Treatment of the polymer nanoparticles with dilute aqueous sodium hydroxide solution, which is known to corrode Si and extinguish the luminescence of alkylated Si-QDs, results in only a partial reduction in luminescence suggesting that the majority of the alkylated Si-QDs are encapsulated sufficiently deep within the polymer matrix to protect them from alkaline attack. Miniemulsion polymerization of the monomers styrene and 4-vinylbenzaldehyde affords polymer nanoparticles displaying reactive aldehyde groups upon their surfaces, which could then be decorated with a selection of molecules through imine, oxime or hydrazone condensation reactions. We speculate that polymer-SiQD composite nanoparticles whose surfaces can be further decorated will increase the utility of luminescent Si-QDs in applications such as anti-counterfeiting and as probes of biological processes.

Shaping gold nanocomposites with tunable optical properties

We report the synthesis of morphological uniform composites using miniemulsions of poly(tert-butyl acrylate) or poly(styrene) containing organically capped gold nanocrystals (NCs). The optical features of such hybrid structures are dominated by plasmonic effects and depend critically on the morphology of the resulting nanocomposite. In particular, we demonstrate the ability to tune the overall optical response in the visible spectral region by varying the Au NCs arrangement within the polymer matrix, and therefore the interparticle plasmon coupling, using Au NCs resulting from the same batch of synthesis. This is a consequence of two well-known effects on the optical properties of Au particles: the variation of the surrounding dielectric refractive index and interparticle plasmonic coupling. The research reported here shows a general strategy to produce optical responsive nanocomposites via control of the morphology of submicrometric polymer particles containing metal nanocrystals and thus is an alternative to the more common strategy of size tuning metal nanoparticles used as nanofillers.

Polymer-Nanoparticle Composites: From Synthesis to Modern Applications

The addition of inorganic spherical nanoparticles to polymers allows the modification of the polymers physical properties as well as the implementation of new features in the polymer matrix. This review article covers considerations on special features of inorganic nanoparticles, the most important synthesis methods for ceramic nanoparticles and nanocomposites, nanoparticle surface modification, and composite formation, including drawbacks. Classical nanocomposite properties, as thermomechanical, dielectric, conductive, magnetic, as well as optical properties, will be summarized. Finally, typical existing and potential applications will be shown with the focus on new and innovative applications, like in energy storage systems.

Optical Fiber Sensing Using Quantum Dots

Recent advances in the application of semiconductor nanocrystals, or quantumdots, as biochemical sensors are reviewed. Quantum dots have unique optical properties thatmake them promising alternatives to traditional dyes in many luminescence basedbioanalytical techniques. An overview of the more relevant progresses in the application ofquantum dots as biochemical probes is addressed. Special focus will be given toconfigurations where the sensing dots are incorporated in solid membranes and immobilizedin optical fibers or planar waveguide platforms.

Photoluminescence of a freely suspended monolayer of quantum dots encapsulated into layer-by-layer films

A single monolayer of CdSe/ZnS quantum dots (QDs) has been encapsulated into a 60 nm free-suspended layer-by-layer (LbL) film. The QD monolayer showed a low light-emission within this film in contact with supporting solid substrates, but the manifold increase of photoluminescencence intensity was observed when the film was lifted and freely suspended over the microfabricated cylindrical cavities. This phenomenon was discussed in relationship with the effect of the elimination of the surface quenching enhanced by optical reflection from highly reflective silicon cavities. We suggest that a significant increase of the photoluminescence intensity of QD monolayers suspended over the microfabricated array can be interesting for future diagnostic and sensing applications.

Polymer grafting from CdS quantum dots via AGET ATRP in miniemulsion

We report the synthesis of CdS quantum dot (QD)-poly(acrylate) nanocomposites using a recently developed catalytic system where activators are generated by electron transfer for atom-transfer radical polymerization (ATRP) in a miniemulsion. The QD surface was functionalized with a tris(alkyl)phosphine, previously modified with an ATRP chlorine initiator, and subsequent controlled polymerization was carried out from the functionalized surface of nanoparticles. The final material showed a high homogeneity and the QDs were evenly dispersed. The optical-absorption edge in the visible spectra of the nanocomposites attests the presence of the CdS QDs. Quantum confinement effects were assigned, though a blue shift in relation to the optical spectrum of the initial QDs has been observed.