Visible light active photocatalytic degradation of bisphenol-A using nitrogen doped TiO2

Historical development and prospects of photocatalysts for pollutant removal in water

Photocatalysis, as a low-cost and environment friendly technology, has demonstrated a significant potential for water pollution purification; it has received extensive attention in recent decades. The key is the photocatalyst; a large number of photocatalysts have been developed. To better understand and further develop the photocatalysis technology for water treatment, this review summarizes its development over time. The development period is divided into four stages (1960s-1993, 1994-2000, 2001-2010, and 2011-present) to provide readers with a better understanding of the development characteristics, and causes and consequences of each historical stage. This review expounds the origin and development of photocatalysis and the obstacles encountered and overcome. It describes the development of mechanisms and methods to solve these problems in each time period. Moreover, it reviews the recent development of new photocatalysts, the concept of designing photocatalysts, and photocatalytic-coupling systems. Finally, it enumerates the problems that continue to exist in the application of photocatalysis technology, and highlights the key issues that must be addressed in future research. The review is aimed at providing the researchers with a deeper understanding of photocatalysis technology and encourage further development of the application of photocatalysis to water treatment.

Photocatalytic degradation of bisphenol A in aqueous media: A review

Bisphenol A (BPA) is known to be an emerging pollutant in various environmental compartments. Human exposure to BPA occurs widely because it is commonly used as the raw material in a variety of industrial processes (e.g., the preparation of epoxy and polycarbonate resins). In this review, a brief survey was carried out to cover a range of photocatalytic materials (e.g., titania, zinc, silver, carbon, and bismuth) and their modified forms as an effective means to treat water systems contaminated with BPA. The overall efficiency and limitations of these catalysts are described for the photocatalytic treatment of BPA.

Recent advances in photocatalytic treatment of pollutants in aqueous media

Photocatalysis can be an excellent solution for resolving the world's energy and environmental problems. It has a wide range of applications for the decontamination of diverse hazardous pollutants in aqueous media. Technological progress in this research field has been achieved toward the improvement of the solar sensitivity to enhance the efficiency of pollutant decontamination. As a result, various strategies have been introduced to upgrade photocatalytic performance with the modification of prototypical photocatalyst such as doping, dye sensitization, semiconductor coupling, mesoporous supports, single site, and nano-based catalysts. In this review, a brief survey is presented to describe those strategies based on the evaluation made against various pollutants (such as pharmaceuticals, pesticides, heavy metals, detergents, and dyes) in aqueous media.

Toward tunable adsorption properties, structure, and crystallinity of titania obtained by block copolymer and scaffold-assisted templating

Nanostructured titania and composite titania materials were synthesized for the first time by a one-pot strategy in an aqueous solution containing Pluronic P123 block copolymer and suitable precursors. The strategy can be considered as more facile, environmentally friendly, and less expensive as compared to the existing ones that require use of organic solvents. In the case of composites, silica and alumina particles were used as a structure protecting scaffold and composite components. This synthesis strategy allowed tuning of adsorption and structural properties of the resulting materials; namely, the specific surface area was varied from 84 to 250 m(2) g(-1), total pore volume from 0.11 to 0.46 cm(3) g(-1), and the pore width from 5.6 to 11.2 nm. All samples studied but one showed exclusively anatase phase, and the composites obtained with silica scaffold showed tunable degree of crystallinity. The proposed approach to tailoring the surface and structure properties of titania is especially important for the development of high performance materials for photocatalysis, lithium-based batteries, and dye-sensitized solar cells.

Nonylphenol, octylphenol, and bisphenol-A in the aquatic environment: a review on occurrence, fate, and treatment

This paper reviews the current knowledge on the occurrence, biodegradation, and photooxidation of nonylphenol (NP), octylphenol (OP), and bisphenol-A (BPA) in aquatic environment. Generally, the concentrations determined were 0.006-32.8, < 0.001-1.44, and 0.0005-4.0 mu g L(-1) for NP, OP, and BPA respectively in river waters worldwide. Anthropogenic activities that can lead to run-off and storm water discharge may contribute to such concentrations in rivers. Pathways for biodegradation of NP and BPA appear to be similar. The influence of ferric ions, oxalate, hydrogen peroxide, and dissolved organic matter (DOM) on the photooxidation of NP and BPA in natural water is presented. Several techniques including nanofiltration, adsorption, sonochemical, photocatalytic, chlorination, ozonation, and ferrate(VI) oxidation for removals of NP, OP, and BPA are also reviewed.