Sample size considerations in designing studies with intra-oral models

The Role of Microbiology in Models of Dental Caries: Reaction Paper

Models of the caries process have made significant contributions toward defining the roles of bacteria in caries. Microbiologists use a variety of in vitro systems to model aspects of the caries process. Also, in situ models in humans provide information on the microbiology of caries in vivo. These models do not involve the entire process leading to natural caries; consequently, the results from such studies are used to deduce the roles of bacteria in natural caries. Therefore, they can be described as Inferential Caries Models. In contrast, animal models and some clinical trials in humans involve natural caries and can be described as Complete Caries Models. Furthermore, these models are used in two distinct ways. They can be used as Exploratory Models to explore different aspects of the caries process, or as Test Models to determine the effects of anticaries agents. This dichotomy in approach to the use of caries models results in modification of the models to suit a particular role. For example, if we consider Exploratory Models, the in situ appliance in humans is superior to others for analyzing the microbiology of plaque development and demineralization in vivo. The chemostat and biofilm models are excellent for exploring factors influencing bacterial interactions. Both models can also be used as Test Models. The in situ model has been used to test the effects of fluoride on the microflora and demineralization, while the chemostat and biofilm models allow for the testing of antibacterial agents. Each model has its advantages and disadvantages and role in analysis of the caries process. Selection of the model depends on the scientific question posed and the limitations imposed by the conditions available for the study.

Investigation of Factors Influencing Stain Formation Utilizing an in Situ Model

In order to understand the factors of extrinsic stain formation more fully, we have developed an in situ stain model. This consists of polished bovine enamel blocks attached to partial or full dentures worn by adult volunteers for 24 h per day. The dentures were cleaned twice daily with a commercial dentifrice and toothbrush, with care taken to avoid brushing the inserts. A Minolta CR321 Chroma Meter in the L*a*b* mode was used for taking reflectance measurements of the stain formed on the enamel inserts. From these values, changes in the color of the inserts were calculated and the level of stain determined. In general, the stain formed on the enamel inserts was yellow and increased in intensity and darkness with time. The enamel inserts with the largest stain increases were from smokers rather than non-smokers. No correlation was observed between amount of stain and quantity of tea and coffee consumed. When the effects of surface roughness on in situ stain formation were considered, the major variable in this study was found to be the location of the enamel insert in the denture rather than the surface roughness.

Evaluation of the effects of the bonding agent on acid-etched human enamel demineralization: in situ study

This in situ study evaluated the influence of the bonding agent on demineralization of acid-etched human enamel. Enamel blocks obtained from 20 human molars (four blocks per tooth) were divided into five groups. For the control groups, healthy control (HC, no treatment) and acid-etched control (EC, etching with 35 per cent phosphoric acid for 20 seconds), the specimens were obtained by sectioning in half, one block from each tooth. For the experimental groups, experimental etched group (EE), experimental Concise™ group (CE), and experimental Transbond™ group (TE), all specimens were etched with 35 per cent phosphoric acid for 20 seconds (EE) and treated with Concise™ enamel bond (CE) and Transbond™ XT primer (TE). Specimens from the experimental groups were fixed at intra-oral appliances wore by 10 volunteers and exposed to oral environment. After 28 days, the specimens were sectioned in the mesial-distal direction and the enamel cross-sectional Knoop hardness number (KHN, 50 g, 15 seconds) was measured at the cervical and occlusal regions at 25, 50, and 75 μm from the enamel surfaces. Data were analysed by analysis of variance (ANOVA) and Tukey honestly significantly different test for multiple comparisons (α = 0.05). Enamel KHN (P < 0.05) was recovered only in the Concise-treated group (CE; P < 0.05). When considering depth measurements, KHN results were 25 > 50 > 75 μm (P < 0.05). None of the groups exposed to the intra-oral environment for 28 days have recovered completely the enamel microhardness, but the order of improvement was better in the CE group than the TE group, the latter being only slightly better than the EE group.

Calcium pre-rinse greatly increases overnight salivary fluoride after a 228 ppm fluoride rinse

BACKGROUND

Large increases in salivary fluoride were reported 1 h after a calcium pre-rinse/NaF rinse.

AIMS

This study examined the persistence of these increases.

METHODS

12 subjects rinsed in the evening with water, with a 228 microg/g (ppm) F rinse or with 150 mmol/l calcium lactate followed by a 228 microg/g F rinse. In a second experiment these same patients rinsed with a 912 microg/g F rinse. Saliva samples were obtained the morning after rinsing, centrifuged and the supernatants analyzed.

RESULTS

The Ca pre-rinse/228 microg/g F rinse induced an increase in overnight salivary F over the 912 microg/g F rinse (approximately 2.5 times) and a statistically significant increase over the 228 mug/g F rinse (approximately 5.5 times).

CONCLUSIONS

The results suggest that a Ca pretreatment may increase the cariostatic effect of topical F agents.

Enamel demineralization in situ with various frequencies of carbohydrate consumption with and without fluoride toothpaste

There is little information in the literature on the relationship among the frequency of carbohydrate consumption, the use of fluoride toothpaste, and enamel demineralization. The aim of this investigation was to compare the extent of demineralization of enamel slabs in situ, with a sugar-based solution, consumed in constant amounts but with various frequencies in subjects both with and without the use of fluoride (F) toothpaste. Eight subjects wore removable mandibular appliances carrying an enamel slab cut from white-spot lesions. The subjects were required to drink 500 mL of a 120-gm/L sugar solution either once, 3, 5, 7, or 10 times/day for 30 sec on each occasion, for a period of 5 days while brushing their teeth twice daily with either a F (1450 ppm NaF) or a F-free toothpaste. Mineral analysis revealed that when the subjects used a F toothpaste, net demineralization was evident only with the seven- and 10-times/day regime (ns). When F-free toothpaste was used, statistically significant demineralization was observed when the frequency exceeded 3 times/day. This study demonstrates the importance of F-containing toothpaste in enamel re-/demineralization by varying the frequency of carbohydrate challenge

Remineralization effects of a two-solution fluoride mouthrinse: an in situ study

Results from previous studies show that a two-solution fluoride (F) rinse is significantly more effective than a NaF rinse of the same F content of 250 microg/g (ppm) in remineralizing enamel and root lesions in an in vitro cyclic de- and remineralization model. In the present study, the two-solution rinse and two NaF rinses with F contents of 250 ppm and 1000 ppm were evaluated in an intra-oral remineralization model. Caries-like lesions were formed in the enamel of extracted human molars with the use of a pH 4 demineralizing solution. Thin sections of the enamel (approximately 120 microm) containing lesions were prepared, and the mineral contents of the lesions were assessed by quantitative microradiography. With the cut surfaces protected by nail varnish, 3 enamel specimens were mounted with wax in the lingual areas of a removable mandibular appliance. The study used a randomized, crossover design with seven subjects. In each of the 3 legs of the study, subjects wore the appliances continuously except when eating, drinking, and brushing their teeth. Twice daily (after breakfast and before bedtime), the subjects received a one-minute rinse with 20 mL of (1) 250-ppm-F NaF rinse, (2) 1000-ppm-F NaF rinse, or (3) 228-ppm-F two-solution F rinse. At the end of the 14-day experimental period, the sections were retrieved, and the mineral contents of the lesions were again assessed quantitatively. The results show that both the 1000-ppm-F NaF and 228-ppm-F two-solution rinses produced a greater (p < 0.05) remineralization than did the 250-ppm-F NaF rinse. The remineralization produced by the two-solution rinse was not statistically different (p > 0.05) from that produced by the NaF rinse with 4x the F content (1000 ppm F).

The effect of a fluoridated toothpaste on dentinal lesions in plaque-filled grooves: an intra-oral crossover study

Recently, we introduced an intra-oral dentin demineralization model to evaluate the efficacy of a fluoridated toothpaste at plaque-retention sites with limited access to salivary components and fluoride. Usage of the fluoridated toothpaste reduced mineral loss from grooves in sound dentin by 15% compared with a non-fluoridated toothpaste (Lagerweij et al., 1997). In the current study, preformed dentinal lesions were subjected to similar toothpaste treatments. To improve the power of the model in discriminating between toothpaste groups, we changed the design from monadic to crossover to reduce the influence of variation between the participants. Two sets of specimens were placed in the partial prostheses of 29 participants who used a toothpaste containing either 1000 ppm fluoride or no fluoride during two consecutive six-week periods. Changes in mineral content were analyzed by transverse microradiography. The average mineral loss after the non-fluoride period was 1785 vol% x micron (SD 2399), and 1335 vol% x micron (SD 2039) after the fluoride period, a 25% inhibition in demineralization. Analysis of variance showed that the demineralization was significantly influenced not only by the type of treatment (p < 0.001 level), but also by the participant (p < 0.001), the width of the groove (p < 0.001), and the depth into the groove where changes in mineral content were measured (p < 0.017). Twenty-one percent of all the lesions showed remineralization. No significant difference in the extent or the occurrence of remineralization was found between the treatments.

In situ caries models

By using in situ models, we have the potential to study both fundamental aspects of the caries process as well as more applied research problems such as the effect of food on dental caries and the role of fluoride in caries prevention in human subjects without actually causing caries in the natural dentition. The key experimental parameters that need to be considered in the development of an in situ model are the characteristics of the subject panel, the physical design of the model, the type of hard tissue substrate and the method of assessing mineral status, and the study design and clinical protocol. Each parameter must be carefully considered in relation to the objectives of the research, study design requirements, ethical considerations, impact on clinical relevance, and impact on the control of variation. The major source of variation associated with in situ models should be of biological and not experimental origin. The design and conduct of proper in situ model studies require a clear understanding of the caries process, sound analytical support, and a knowledge of how to work with research subjects to achieve a high level of compliance. Given the complex nature of caries, a combination of hard tissue substrates--including sound, surface-softened lesions and subsurface lesions--may be necessary to model all aspects of caries progression and prevention successfully. Internal validation of in situ models using fluoride dose-response controls is considered to be necessary for studies evaluating the efficacy of new fluoride dentifrice formulations.

Reactor paper concerning patient selection and appliance design in intra-oral models

Patient selection and appliance design are important factors in the development of intra-oral models. Adults, rather than children, are recommended as panelists due to their similarity to children in response to fluoride for caries prevention, greater likelihood of compliance with all study requirements, and greater availability for appointments. It may be desirable for additional factors--including the presence of cariogenic micro-organisms and the characteristics of their saliva with regard to remineralization--to be used in the selection of panelists. Cross-over test designs may be desirable to minimize the impact of these variables as well as of dietary differences. Appliances should be designed to approximate the normal oral conditions to the maximum extent possible. Intra-oral models should be capable not only of detecting the effects of clinically-proven fluoride treatments but also of detecting fluoride dosage responses.