The biointegration profile of fiber-reinforced plates following tibial implantation in sheep

Biointegrative, mineral fiber-reinforced bone fixation implants recently introduced in orthopedic surgery have expanded available treatment options for fractures and bone deformities. This new technology aims to address the disadvantages of permanent metallic implants while overcoming inherent concerns of adverse inflammatory reactions when using polymer-based orthopedic implants. The purpose of this double-arm preclinical study was to evaluate the safety, biocompatibility, and biointegration of fiber-reinforced plates, following implantation on the tibias of eight sheep. Left tibias underwent periosteal elevation, allowing for implant attachment directly onto the cortical surface; right tibia plates were implanted over intact periosteum. Microcomputed tomography and histopathology were performed at 13, 26, 52, 78, 104, and 134 weeks postimplantation. All animals were evaluated clinically at each time point, with no evidence of local adverse reactions. Histopathology demonstrated anti-inflammatory M2-like macrophages and multinucleated giant cells corresponding to implant bioabsorption, similar for both groups at each time point, and indicating expected implant biocompatibility. Inflammatory cells (i.e., eosinophils, lymphophyctes, plasma cells, and M1-like macrophages) were absent throughout the study. The bioabsorption process had started at 13 W, with the highest rate at 52-78 W. At 104 W, only residual polymer material was left (∼5% of implant area). Low amounts of mineral fibers were evident at 78 W and were absent (fully remodeled) by 104 W. At 134 W, implants at both sites were fully bioabsorbed. In conclusion, these new fiber-reinforced implants demonstrated bone remodeling and complete biointegration, with no adverse tissue response. Clinical significance: In this double-arm, 2.5-year study, a biointegrative, fiber-reinforced plate implanted on the tibias of sheep was fully absorbed within 134 weeks, with no adverse tissue reaction. Bioabsorption was similar, with or without periosteal elevation, mimicking conditions like those observed in traumatic injuries disrupting the periosteum, open reduction and internal fixation, or minimally invasive surgeries. These results demonstrate the feasibility, versatility, and safety of this new class of biointegrative bone implants. This newly developed technology avoids the complications of the removal of metal implants.

Biodegradable Bone Implants as a New Hope to Reduce Device-Associated Infections-A Systematic Review

Bone fractures often require fixation devices that frequently need to be surgically removed. These temporary implants and procedures leave the patient more prone to developing medical device-associated infections, and osteomyelitis associated with trauma is a challenging complication for orthopedists. In recent years, biodegradable materials have gained great importance as temporary medical implant devices, avoiding removal surgery. The purpose of this systematic review was to revise the literature regarding the use of biodegradable bone implants in fracture healing and its impact on the reduction of implant-associated infections. The systematic review followed the PRISMA guidelines and was conducted by searching published studies regarding the in vivo use of biodegradable bone fixation implants and its antibacterial activity. From a total of 667 references, 23 studies were included based on inclusion and exclusion criteria. Biodegradable orthopedic implants of Mg-Cu, Mg-Zn, and Zn-Ag have shown antibacterial activity, especially in reducing infection burden by MRSA strains in vivo osteomyelitis models. Their ability to prevent and tackle implant-associated infections and to gradually degrade inside the body reduces the need for a second surgery for implant removal, with expectable gains regarding patients’ comfort. Further in vivo studies are mandatory to evaluate the efficiency of these antibacterial biodegradable materials.

Biodegradable magnesium fixation screw for barrier membranes used in guided bone regeneration

An ideal fixation system for guided bone (GBR) regeneration in oral surgery must fulfil several criteria that includes the provision of adequate mechanical fixation, complete resorption when no longer needed, complete replacement by bone, as well as be biocompatible and have a good clinical manageability. For the first time, a biodegradable magnesium fixation screw made of the magnesium alloy WZM211 with a MgF₂ coating has been designed and tested to fulfill these criteria. Adequate mechanical fixation was shown for the magnesium fixation screw in several benchtop tests that directly compared the magnesium fixation screw with an equivalent polymeric resorbable device. Results demonstrated slightly superior mechanical properties of the magnesium device in comparison to the polymeric device even after 4 weeks of degradation. Biocompatibility of the magnesium fixation screw was demonstrated in several in vitro and in vivo tests. Degradation of the magnesium screw was investigated in in vitro and in vivo tests, where it was found that the screw is resorbed slowly and completely after 52 weeks, providing adequate fixation in the early critical healing phase. Overall, the magnesium fixation screw demonstrates all of the key properties required for an ideal fixation screw of membranes used in guided bone regeneration (GBR) surgeries.

•

The first comprehensive report on experimental data for a biodegradable metallic fixation pin for use in oral surgery is presented.

•

Results demonstrated superior mechanical properties of the Mg fixation pin in comparison to the polymeric pin even after 4 weeks of degradation.

•

The MgF₂ coated Mg pin made of alloy WZM211 has a slow corrosion rate with a service time of 4 weeks and is fully resorped at 52 weeks after implantation.

Scientific and Regulatory Policy Committee Points to Consider for Medical Device Implant Site Evaluation in Nonclinical Studies

Nonclinical implantation studies are a common and often critical step for medical device safety assessment in the bench-to-market pathway. Nonclinical implanted medical devices or drug-device combination products require complex macroscopic and microscopic pathology evaluations due to the physical presence of the device itself and unique tissue responses to device materials. The Medical Device Implant Site Evaluation working group of the Society of Toxicologic Pathology's (STP) Scientific and Regulatory Policy Committee (SRPC) was tasked with reviewing scientific, technical, and regulatory considerations for these studies. Implant site evaluations require highly specialized methods and analytical schemes that should be designed on a case-by-case basis to address specific study objectives. Existing STP best practice recommendations can serve as a framework when performing nonclinical studies under Good Laboratory Practices and help mitigate limitations in standards and guidances for implant evaluations (e.g., those from the International Organization for Standardization [ISO], ASTM International). This article integrates standards referenced by sponsors and regulatory bodies with practical pathology evaluation methods for implantable medical devices and combination products. The goal is to ensure the maximum accuracy and scientific relevance of pathology data acquired during a medical device or combination drug-device implantation study.

Dendriplex-Impregnated Hydrogels With Programmed Release Rate

Hydrogels are biocompatible matrices for local delivery of nucleic acids; however, functional dopants are required to provide efficient delivery into cells. In particular, dendrimers, known as robust nucleic acid carriers, can be used as dopants. Herein, we report the first example of impregnating neutral hydrogels with siRNA-dendrimer complexes. The surface chemistry of dendrimers allows adjusting the release rate of siRNA-containing complexes. This methodology can bring new materials for biomedical applications.

Osteochondral tissue engineering: Perspectives for clinical application and preclinical development

The treatment of osteochondral defects (OCD) remains challenging. Among currently available surgical treatments for OCDs, scaffold-based treatments are promising to regenerate the osteochondral unit. However, there is still no consensus regarding the clinical effectiveness of these scaffold-based therapies for OCDs. Previous reviews have described the gradient physiological characteristics of osteochondral tissue and gradient scaffold design for OCD, tissue engineering strategies, biomaterials, and fabrication technologies. However, the discussion on bridging the gap between the clinical need and preclinical research is still limited, on which we focus in the present review, providing an insight into what is currently lacking in tissue engineering methods that failed to yield satisfactory outcomes, and what is needed to further improve these techniques. Currently available surgical treatments for OCDs are firstly summarized, followed by a comprehensive review on experimental animal studies in recent 5 years on osteochondral tissue engineering. The review will then conclude with what is currently lacking in these animal studies and the recommendations that would help enlighten the community in developing more clinically relevant implants.

The translational potential of this article

This review is attempting to summarize the lessons from clinical and preclinical failures, providing an insight into what is currently lacking in TE methods that failed to yield satisfactory outcomes, and what is needed to further improve these implants.

Quality control methods in musculoskeletal tissue engineering: from imaging to biosensors

Tissue engineering is rapidly progressing toward clinical application. In the musculoskeletal field, there has been an increasing necessity for bone and cartilage replacement. Despite the promising translational potential of tissue engineering approaches, careful attention should be given to the quality of developed constructs to increase the real applicability to patients. After a general introduction to musculoskeletal tissue engineering, this narrative review aims to offer an overview of methods, starting from classical techniques, such as gene expression analysis and histology, to less common methods, such as Raman spectroscopy, microcomputed tomography, and biosensors, that can be employed to assess the quality of constructs in terms of viability, morphology, or matrix deposition. A particular emphasis is given to standards and good practices (GXP), which can be applicable in different sectors. Moreover, a classification of the methods into destructive, noninvasive, or conservative based on the possible further development of a preimplant quality monitoring system is proposed. Biosensors in musculoskeletal tissue engineering have not yet been used but have been proposed as a novel technology that can be exploited with numerous advantages, including minimal invasiveness, making them suitable for the development of preimplant quality control systems.

Safety and efficacy of sFilm-FS, a novel biodegradable fibrin sealant, in Göttingen minipigs

Bleeding during surgical procedures is a common complication. Therefore, hemostatic agents have been developed to control bleeding, and fibrin sealants have several benefits. sFilm-FS is a novel fibrin sealant that comprises a biodegradable co-polymeric film embedded with human fibrinogen and thrombin. Herein, the safety and efficacy of sFilm-FS were compared using a liver and spleen puncture model of Göttingen minipigs with those of the standard hemostatic techniques (control animals) and EVARREST^®, a reference fibrin sealant. Hemostasis and reduced blood loss were more effectively achieved with sFilm-FS than with the standard techniques in the control animals and comparable to those achieved with EVARREST^®. No treatment-related adverse effects were observed in any of the groups. Histopathological evaluation indicated that sFilm-FS was slightly and moderately reactive at the liver puncture site and spleen, respectively, compared with the standard techniques in the control animals. These changes are expected degradation reactions of the co-polymeric film and are not considered as adverse events. No treatment-related abnormalities were noted in the other evaluated organs. Additionally, no evidence of local or systemic thromboses was noted. These results support the use of sFilm-FS for hemostasis in humans.

Liquid Copolymers as Biodegradable Surgical Sealant

Surgical sealants are widely used to prevent seepage of fluids and liquids, promote hemostasis, and close incisions. Despite the remarkable progress the field of biomaterials has undergone, the clinical uses of surgical sealants are limited because of their short persistence time in vivo, toxicity, and high production costs. Here, the development of two complementary neat (solvent-free) prepolymers, PEG₄ -PLGA-NHS and PEG₄ -NH₂ , that harden upon mixing to yield an elastic biodegradable sealant is presented. The mechanical and rheological properties and cross-linking rate can be controlled by varying the ratio between the two prepolymers. The tested sealants show a longer persistence time compared with fibrin glue, minimal cytotoxicity in vitro, and excellent biocompatibility in vivo. The neat, multiarmed approach demonstrated here improves the mechanical and biocompatibility properties and provides a promising tissue sealant solution for wound closure in future surgical procedures.

CorNeat KPro: Ocular Implantation Study in Rabbits

PURPOSE

The purpose of this study was to evaluate surgical feasibility and long-term integration of the CorNeat Keratoprosthesis (KPro), a novel synthetic cornea, in rabbits.

METHODS

The CorNeat KPro is a synthetic corneal implant designed to treat corneal blindness by using a polymeric scaffold for biointegration, consequently assimilating synthetic optics within ocular tissues. Eight New Zealand White rabbits were implanted unilaterally with the CorNeat KPro and observed for 6 months. Animals were regularly monitored by a certified ophthalmologist using slit-lamp biomicroscopy. One animal developed postoperative endophthalmitis and was removed from the study 7 weeks postsurgery. At termination, eyes were enucleated and evaluated histologically to assess local tissue integration and inflammatory response.

RESULTS

The surgical procedure was found feasible. The CorNeat KPro integrated into all operated eyes, resulting in a retention rate of 87.5% at the conclusion of the 6-month follow-up period. We observed minimal-to-mild conjunctival and iridial congestion and did not find additional inflammatory indicators, such as anterior chamber fibrin, flare, or cells. The optical element of the device remained clear with zero incidence of retroprosthetic membrane formation. Histopathological evaluation revealed comparable tissue and cellular reaction in all eyes, consisting of the presence of fibroblasts and associated collagen fibrils within the device's skirt component. Some eyes showed a mild foreign body reaction surrounding the skirt.

CONCLUSIONS

Clinical and histological findings indicate the integration of the implanted device into the surrounding tissue, evident by the retention rate and the diffuse infiltration of fibroblasts with collagen deposition among the device's fibrils. These data hold promise for clinical application in humans.

Evaluation of Loco-Regional Skin Toxicity Induced by an In Situ Forming Depot after a Single Subcutaneous Injection at Different Volumes and Flow Rates in Göttingen Minipigs

The present study aims to investigate the loco-regional tolerability and injection parameters (i.e., flow rate and administration volume) of an in situ forming depot (ISFD) in Göttingen minipigs, to secure both the therapeutic procedure and compliance in chronic medical prescriptions. The ISFD BEPO^® technology (MedinCell S.A.) is investigated over 10 days, after a single subcutaneous injection of test item based on a DMSO solution of diblock and triblock polyethylene glycol-polylactic acid copolymers. Injection sites are systematically observed for macroscopic loco-regional skin reactions as well as ultrasound scanning, enabling longitudinal in vivo imaging of the depot. Observations are complemented by histopathological examinations at 72 h and 240 h post-injection. Overall, no treatment-emergent adverse effects are macroscopically or microscopically observed at the subcutaneous injection sites, for the tested injection flow rates of 1 and 8 mL/min and volumes of 0.2 and 1 mL. The histopathology examination confirms an expected foreign body reaction, with an intensity depending on the injected volume. The depot morphology is similar irrespective of the administration flow rates. These results indicate that the ISFD BEPO^® technology can be considered safe when administered subcutaneously in Göttingen minipigs, a human-relevant animal model for subcutaneous administrations, in the tested ranges.

An overview of PLGA in-situ forming implants based on solvent exchange technique: effect of formulation components and characterization

As a result of the low oral bioavailability of several drugs, there is a renewed interest for parenteral administration to target their absorption directly into the blood bypassing the long gastrointestinal route and hepatic metabolism. In order to address the potential side effects of frequent injections, sustained release systems are the most popular approaches for achieving controlled long-acting drug delivery. Injectable in-situ forming implants (ISFIs) have gained greater popularity in comparison to other sustained systems. Their significant positive aspects are attributed to easier production, acceptable administration route, reduced dosing frequency and patient compliance achievement. ISFI systems, comprising biodegradable polymers such as poly (lactide-co-glycolide) (PLGA) based on solvent exchange mechanisms, are emerged as liquid formulations that develop solid or semisolid depots after injection and deliver drugs over extended periods. The drug release from ISFI systems is generally characterized by an initial burst during the matrix solidification, followed by diffusion processes and finally polymeric degradation and erosion. The choice of suitable solvent with satisfactory viscosity, miscibility and biocompatibility along with considerable PLGA hydrophobicity and molecular weights is fundamental for optimizing the drug release. This overview gives a particular emphasis on evaluations and the wide ranges of requirements needed to achieve reasonable physicochemical characteristics of ISFIs.

In vivo degradation and endothelialization of an iron bioresorbable scaffold

Detection of in vivo biodegradation is critical for development of next-generation medical devices such as bioresorbable stents or scaffolds (BRSs). In particular, it is urgent to establish a nondestructive approach to examine in vivo degradation of a new-generation coronary stent for interventional treatment based on mammal experiments; otherwise it is not available to semi-quantitatively monitor biodegradation in any clinical trial. Herein, we put forward a semi-quantitative approach to measure degradation of a sirolimus-eluting iron bioresorbable scaffold (IBS) based on optical coherence tomography (OCT) images; this approach was confirmed to be consistent with the present weight-loss measurements, which is, however, a destructive approach. The IBS was fabricated by a metal-polymer composite technique with a polylactide coating on an iron stent. The efficacy as a coronary stent of this new bioresorbable scaffold was compared with that of a permanent metal stent with the name of trade mark Xience, which has been widely used in clinic. The endothelial coverage on IBS was found to be greater than on Xience after implantation in a rabbit model; and our well-designed ultrathin stent exhibited less individual variation. We further examined degradation of the IBSs in both minipig coronary artery and rabbit abdominal aorta models. The present result indicated much faster iron degradation of IBS in the rabbit model than in the porcine model. The semi-quantitative approach to detect biodegradation of IBS and the finding of the species difference might be stimulating for fundamental investigation of biodegradable implants and clinical translation of the next-generation coronary stents.

•

A semi-quantitative OCT method was suggested to evaluate in vivo biodegradation of an iron based coronary stent IBS in a nondestructive manner.

•

The in vivo biodegradation of IBS exhibited dependence on animal species.

•

The endothelial coverage on the biodegradable stent IBS was better than on the commercialized nonbiodegradable stent Xience in rabbits.

Local Tolerance and Biodegradability of a Novel Artificial Dura Mater Graft Following Implantation Onto a Dural Defect in Rabbits

Dura mater defects are a common problem following neurosurgery. Dural grafts are used to repair these defects; among them are biodegradable polymeric synthetic grafts. ArtiFascia is a novel synthetic and fibrous Dural graft, composed of poly(l-lactic-co-caprolactone acid) (PLCL) and poly(d-lactic-co-caprolactone acid). In this study, the biodegradability and local tolerance of ArtiFascia was evaluated in rabbits and compared with a bovine collagen matrix as a reference control. ArtiFascia implantation resulted in the formation of neo-dura at the site of implantation and recovery of the dural damage and the calvaria bone above. The implanted graft was completely absorbed after 12 months and the remaining macrophages were morphologically consistent with the anti-inflammatory M2-like phenotype, which contributes to tissue healing and are not pro-inflammatory. The site of the drilled skull bone had a continuous smooth surface, without exuberant tissue or inflammation and a newly formed trabecular bone formation indicated the healing process of the bone. These results support the local tolerability and biodegradability of ArtiFascia when used as a dural graft in rabbits. This study suggests that PLCL-based grafts including ArtiFascia are safe and effective to repair Rabbit Dura.

Local Tolerability and Performance Evaluation in Domestic Pigs of a Fractional Radiofrequency Device for Dermatologic Treatment

Information on the safety of energy-based dermatological surgical devices in domestic pigs, and fractional radiofrequency (RF) devices in particular, is very limited. The aim of this study was to evaluate in a GLP-compliant study in domestic pigs the local reaction and performance of a novel fractional RF device. Five female domestic pigs were subjected to fractional RF pulses, using different energy and pulse durations and depth of penetration of the pulses. The animals were evaluated clinically and histologically at different time points (days 0, 1, 3, 7, and 14) postenergy exposure. There were no microscopic or macroscopic local adverse effects in any tested power settings, and there was time-related progressive healing, reaching complete macroscopic and microscopic healing by 7 days postapplication. As expected, there was power-related progressive increase in the incidence of ablation (destruction of skin tissue by vaporization) and coagulative necrosis of the dermis from low to high power setting. This comprehensive study, using multiple power settings (both ablative and coagulative) and several time points, will be of benefit for future studies evaluating new fractional RF devices.

Histology Strategies for Medical Implants and Interventional Device Studies

Histology of medical devices poses a variety of unique challenges. Comprehensive histologic assessment of medical devices often requires spatial context and high-quality retention of the device–tissue interface. However, the composition of many medical devices is often not amenable to traditional paraffin embedding and thus alternative specialized methodologies such as hard resin embedding must be used. Hard resin embedding requires specialized laboratory technical expertise and equipment, and the fixation techniques and resin composition used markedly impact the feasibility of immunohistochemistry. For the continuity of spatial context during histologic evaluation, additional imaging methods such as macrophotography, radiography, micro-Computerized Tomography (microCT), or magnetic resonance imaging (MRI) can be used to guide sectioning and to complement histologic findings. Although standardized approaches are scarce for medical devices, important considerations specific to medical device histology are discussed, including general specimen preparation, special considerations for devices by organ system, and the challenges of immunohistochemistry. Histologic preparation of medical devices must be thoughtful, thorough, and tailored to achieve optimal histologic outcomes for complex, valuable, and often limited implant specimens.