Hypoxia Preconditioned Serum Hydrogel (HPS-H) Accelerates Dermal Regeneration in a Porcine Wound Model

Harnessing the body's intrinsic resources for wound healing is becoming a rapidly advancing field in regenerative medicine research. This study investigates the effects of the topical application of a novel porcine Hypoxia Preconditioned Serum Hydrogel (HPS-H) on wound healing using a minipig model over a 21-day period. Porcine HPS exhibited up to 2.8× elevated levels of key angiogenic growth factors (VEGF-A, PDGF-BB, and bFGF) and demonstrated a superior angiogenic effect in a tube formation assay with human umbilical endothelial cells (HUVECs) in comparison to porcine normal serum (NS). Incorporating HPS into a hydrogel carrier matrix (HPS-H) facilitated the sustained release of growth factors for up to 5 days. In the in vivo experiment, wounds treated with HPS-H were compared to those treated with normal serum hydrogel (NS-H), hydrogel only (H), and no treatment (NT). At day 10 post-wounding, the HPS-H group was observed to promote up to 1.7× faster wound closure as a result of accelerated epithelialization and wound contraction. Hyperspectral imaging revealed up to 12.9% higher superficial tissue oxygenation and deep perfusion in HPS-H-treated wounds at day 10. The immunohistochemical staining of wound biopsies detected increased formation of blood vessels (CD31), lymphatic vessels (LYVE-1), and myofibroblasts (alpha-SMA) in the HPS-H group. These findings suggest that the topical application of HPS-H can significantly accelerate dermal wound healing in an autologous porcine model.

In vivo performance of a tri-leaflet mechanical heart valve prosthesis in an ovine model

OBJECTIVES

We present the long-term results of a trileaflet (Triflo) versus bileaflet (On-X) mechanical valve in both aortic and pulmonary positions in a sheep model.

METHODS

The Triflo valve was implanted in 21 female sheep in aortic (n = 8) and pulmonary position (n = 13). The On-X valve was implanted in 7 female sheep in aortic (n = 1) and pulmonary (n = 6) positions. No antithrombotic medication of any kind was given postoperatively. In the aortic group, survival cohorts were 3 and 5 months. In the pulmonary group, survival cohorts were 10 and 20 weeks. Valve performance was assessed using haematology, echocardiography and acoustic measurements combined with post-mortem pathology analysis of the downstream organs.

RESULTS

The mean gradients were lower for the Triflo valve in both pulmonary [4.30 mmHg (3.70-5.73) vs 6.80 mmHg (4.63-7.96), P = 0.012] and aortic [5.1 mmHg (4.2-7.7) vs 10.7 mmHg (8.7-12.9), P = 0.007] positions. Peak gradients were lower for the Triflo valve in both pulmonary [8.05 mmHg (6.75-10.23) vs 13.15 mmHg (9.20-14.76), P = 0.005] and aortic [8.7 mmHg (7.5-12.5) vs 16.5 mmHg (14.2-19.6), P = 0.009] positions. In both positions, leaflets and housing surface were free from any deposits macro- and microscopically and comparable to nonimplanted control valves. Peripheral organs showed no signs of thrombo-embolic damage. Biochemical and haematological were comparable to preoperative. The closing click sound pressure level of the Triflo was significantly lower in both aortic [108.4 sound pressure level (102.0-115.7) vs 111.7 sound pressure level (105.5-117.0), P < 0.001] and pulmonary [103.6 sound pressure level (99.1-108.9) vs 118.5 sound pressure level (116.7-120.2), P < 0.001] position.

CONCLUSIONS

Preliminary in vivo results of the Triflo valve are promising in both aortic and pulmonary positions in an ovine model. Excellent haemodynamics, stable long-term function, low valve noise and no thrombo-embolic events in the absence of antithrombotic medication lay the foundation to a future clinical first-in-man trial.

A Translational 'Humanised' Porcine Model for Trans-Septal Mitral Valve Interventions: the Right Pulmonary Vein Approach

There is an important need to develop a transcatheter/trans-septal-like model which will allow deliverability of mitral valve devices at the right angulation and height above the mitral annulus similar to the human patient. A ministernotomy allowing for TEE probe to be introduced transpericardially was performed in seven animals. In three, a standard trans-septal approach was used to attempt to deliver a device to the level of the mitral plane with a human delivery system. In four cases, a Dacron tube was connected to the RPV and the device introduced to the LA. Under TEE equivalent imaging, the device was then successfully steered to the mitral plane in all cases, having failed in all trans-septal attempts. A combination of transpericardial echocardiographic imaging (TPE) and RPV approach to the LA facilitated successful human-like mitral valve device implantation.

Preclinical Assessment of Cardiac Valve Substitutes: Current Status and Considerations for Engineered Tissue Heart Valves

Tissue engineered heart valve (TEHV) technology may overcome deficiencies of existing available heart valve substitutes. The pathway by which TEHVs will undergo development and regulatory approval has several challenges. In this communication, we review: (1) the regulatory framework for regulation of medical devices in general and substitute heart valves in particular; (2) the special challenges of preclinical testing using animal models for TEHV, emphasizing the International Standards Organization (ISO) guidelines in document 5840; and (3) considerations that suggest a translational roadmap to move TEHV forward from pre-clinical to clinical studies and clinical implementation.

Time-related Contact Angle Measurements with Human Plasma on Biomaterial Surfaces

Axisymmetric drop shape analysis by profile (ADSA-P) was used to assess in time contact angle changes of human plasma drops placed on four different biomaterials. Results were related with conventional blood compatibility measurements: albumin adsorption, fibrinogen adsorption and platelet adhesion. While contact angle measurements with water are material-related but constant in time, contact angle measurements with plasma changed over time owing to protein adsorption on the solid-liquid interface. The contact medium plasma did not influence the initial contact angle. Contact angles on PDMS decreased most in time (41 degrees) and demonstrated highest levels of conventionally measured albumin and fibrinogen adsorption and platelet adhesion. PTFE, with the lowest contact angle decrease over a 500 minutes period (19 degrees), showed low fibrinogen and albumin adsorption as well as low platelet adhesion. PU and HDPE demonstrated almost similar initial contact angles with plasma and contact angle decreases (26 and 27 degrees), intermediate protein adsorption, and platelet adhesion. We conclude that biocompatibility properties of the tested materials may be more related to the behaviour of their contact angles in time, than to the initial hydrophobic or hydrophilic state.

Large animal models of stroke and traumatic brain injury as translational tools

Acute central nervous system injury, encompassing traumatic brain injury (TBI) and stroke, accounts for a significant burden of morbidity and mortality worldwide. Studies in animal models have greatly enhanced our understanding of the complex pathophysiology that underlies TBI and stroke and enabled the preclinical screening of over 1,000 novel therapeutic agents. Despite this, the translation of novel therapeutics from experimental models to clinical therapies has been extremely poor. One potential explanation for this poor clinical translation is the choice of experimental model, given that the majority of preclinical TBI and ischemic stroke studies have been conducted in small animals, such as rodents, which have small lissencephalic brains. However, the use of large animal species such as nonhuman primates, sheep, and pigs, which have large gyrencephalic human-like brains, may provide an avenue to improve clinical translation due to similarities in neuroanatomical structure when compared with widely adopted rodent models. This purpose of this review is to provide an overview of large animal models of TBI and ischemic stroke, including the surgical considerations, key benefits, and limitations of each approach.

Apixaban Versus Warfarin for Mechanical Heart Valve Thromboprophylaxis in a Swine Aortic Heterotopic Valve Model

Objective—

Warfarin is the current standard for oral anticoagulation therapy in patients with mechanical heart valves, yet optimal therapy to maximize anticoagulation and minimize bleeding complications requires routine coagulation monitoring, possible dietary restrictions, and drug interaction monitoring. As alternatives to warfarin, oral direct acting factor Xa inhibitors are currently approved for the prophylaxis and treatment of venous thromboembolism and reduction of stroke and systemic embolization. However, no in vivo preclinical or clinical studies have been performed directly comparing oral factor Xa inhibitors such as apixaban to warfarin, the current standard of therapy.

Approach and Results—

A well-documented heterotopic aortic valve porcine model was used to test the hypothesis that apixaban has comparable efficacy to warfarin for thromboprophylaxis of mechanical heart valves. Sixteen swine were implanted with a bileaflet mechanical aortic valve that bypassed the ligated descending thoracic aorta. Animals were randomized to 4 groups: control (no anticoagulation; n=4), apixaban oral 1 mg/kg twice a day (n=5), warfarin oral 0.04 to 0.08 mg/kg daily (international normalized ratio 2–3; n=3), and apixaban infusion (n=4). Postmortem valve thrombus was measured 30 days post-surgery for control-oral groups and 14 days post-surgery for the apixaban infusion group. Control thrombus weight (mean) was significantly different (1422.9 mg) compared with apixaban oral (357.5 mg), warfarin (247.1 mg), and apixiban 14-day infusion (61.1 mg; P <0.05).

Conclusions—

Apixaban is a promising candidate and may be a useful alternative to warfarin for thromboprophylaxis of mechanical heart valves. Unlike warfarin, no adverse bleeding events were observed in any apixaban groups.

Lessons learned from the porcine CARPA model: constant and variable responses to different nanomedicines and administration protocols

Pigs provide a sensitive and quantitative animal model of complement (C) activation-related pseudoallergy (CARPA) caused by liposomes and a wide range of nanoparticulate drugs or drug nanocarriers (nanomedicines). The tetrad of symptoms (hemodynamic, hematological, laboratory and skin changes) that arise within minutes after i.v. injection of reactogenic nanomedicines (RNMs) are highly reproducible among different pigs but the presence, direction and relative severity of symptoms are very different with different RNMs and their administration schedule. Bolus administration of RNMs usually trigger pulmonary hypertension with or without various degrees of systemic hyper- or hypotension, tachy-or bradycardia, arrhythmia, blood cell and inflammatory mediator changes and skin rash. These reactions can be rapid or protracted, and fully tachyphylactic, semi-tachyphylactic or non-tachyphylactic. Slow infusion usually diminishes the reactions and/or entail delayed, protracted and less severe hemodynamic and other changes. The goal of this review is to present some technical details of the porcine CARPA model, point out its constant and variable parameters, show examples of different reactions, highlight the unique features and capabilities of the model and evaluate its utility in preclinical safety assessment. The information obtained in this model enables the understanding of the complex pathomechanism of CARPA involving simultaneous anaphylatoxin and inflammatory mediator actions at multiple sites in different organs.

Increasing platelet concentration in platelet-rich plasma inhibits anterior cruciate ligament cell function in three-dimensional culture

Tissue engineering is one new strategy being developed to treat ACL ruptures. One such approach is bio-enhanced ACL repair, where a suture repair is supplemented with a bio-active scaffold containing platelets. However, the optimal concentration of platelets to stimulate ACL healing is not known. We hypothesized that increasing platelet concentrations in the scaffold would enhance critical cell behaviors. Porcine ACL fibroblasts were obtained from explant culture and suspended in platelet poor plasma (PPP), 1× platelet-rich plasma (PRP), 3× PRP, 5× PRP, or phosphate buffered saline (PBS). The cell suspensions were cultured in a 3D collagen scaffold. Cellular metabolism (MTT assay), apoptosis (TUNEL assay), and gene expression for type I and type III collagen were measured. 1× PRP significantly outperformed 5× PRP in all parameters studied: Type I and III collagen gene expression, apoptosis prevention, and cell metabolism stimulation. ACL fibroblasts cultured with 1× PRP had the highest type I and type III collagen gene expression. 1× PRP and PPP groups had the highest cell metabolism and lowest apoptosis rates. Concentration of platelets had significant effects on the behavior of ACL fibroblasts; thus, it is an important parameter that should be specified in clinical or basic science studies.

Obstacles in haemocompatibility testing

ISO 10993-4 is an international standard describing the methods of testing of medical devices for interactions with blood for regulatory purpose. The complexity of blood responses to biomaterial surfaces and the variability of blood functions in different individuals and species pose difficulties in standardisation. Moreover, in vivo or in vitro testing, as well as the clinical relevance of certain findings, is still matter of debate. This review deals with the major remaining problems, including a brief explanation of surface interactions with blood, the current ISO 10993 requirements for testing, and the role of in vitro test models. The literature is reviewed on anticoagulation, shear rate, blood-air interfaces, incubation time, and the importance of evaluation of the surface area after blood contact. Two test categories deserve further attention: complement and platelet function, including the effects on platelets from adhesion proteins, venipuncture, and animal derived- blood. The material properties, hydrophilicity, and roughness, as well as reference materials, are discussed. Finally this review calls for completing the acceptance criteria in the ISO standard based on a panel of test results.

A new concept in the sewing rings for mechanical heart valves

BACKGROUND

Valve-associated complications challenge the quality of life and longevity after heart valve replacement. Inappropriate healing may be a contributing factor.

OBJECTIVE

To evaluate a new design mechanical heart valve in an animal model.

METHODS AND RESULTS

The new valve was fabricated by substituting the sewing ring with an inbuilt suture ridge and an overlying fabric flap. It improved the effective orifice area. Animal experiments were performed on pigs to compare this valve with standard valve models. The animals were kept on dual antiplatelet drugs. Six of the 8 test animals survived the observation period of 140 days compared to 2 of the 6 controls. Among the test valves, one had thrombosis and 3 had significant tissue hyperplasia, whereas 5 control valves had thrombosis associated with significant tissue hyperplasia. Three test valves had paravalvular defects compared to none in the control group. Histology showed good tissue incorporation of the fabric flap of the test valves, whereas the control valves had tissue infiltration limited to the peripheral fabric layer of the sewing ring.

CONCLUSION

The new valve has improved effective orifice area, and the animal study showed better survival, good healing, and a lower incidence of thrombosis and tissue hyperplasia.

Degenerative processes in bioprosthetic mitral valves in juvenile pigs

Background

Glutaraldehyde-treated bioprosthetic heart valves are commonly used for replacement of diseased heart valves. However, calcification and wear limit their durability, and the development of new and improved bioprosthetic valve designs is needed and must be evaluated in a reliable animal model. We studied glutaraldehyde-treated valves 6 months after implantation to evaluate bioprosthetic valve complications in the mitral position in juvenile pigs.

Materials

The study material comprised eight, 5-month old, 60-kg pigs. All pigs received a size 27, glutaraldehyde-treated, stented, Carpentier-Edwards S.A.V. mitral valve prosthesis. After six months, echocardiography was performed, and the valves explanted for gross examination, high resolution X-ray, and histological evaluation.

Results

Five pigs survived the follow-up period. Preexplant echocardiography revealed a median peak and mean velocity of 1.61 m/s (range: 1.17-2.00) and 1.20 (SD = ±0.25), respectively, and a median peak and mean pressure difference of 10.42 mmHg (range: 5.83-16.55) and 6.51 mmHg (SD = ±2.57), respectively. Gross examination showed minor thrombotic depositions at two commissures in two valves and at all three commissures in three valves. High resolution X-ray imaging revealed different degrees of calcification in all explanted valves, primarily in the commissural and belly areas. In all valves, histological evaluation demonstrated various degrees of fibrous sheath formation, limited immunological infiltration, and no overgrowth of host endothelium.

Conclusions

Bioprosthetic glutaraldehyde-treated mitral valves can be implanted into the mitral position in pigs and function after 6 months. Echocardiographic data, calcification, and histological examinations were comparable to results obtained in sheep models and human demonstrating the suitability of the porcine model.

Contribution of large pig for renal ischemia-reperfusion and transplantation studies: the preclinical model

Animal experimentation is necessary to characterize human diseases and design adequate therapeutic interventions. In renal transplantation research, the limited number of in vitro models involves a crucial role for in vivo models and particularly for the porcine model. Pig and human kidneys are anatomically similar (characterized by multilobular structure in contrast to rodent and dog kidneys unilobular). The human proximity of porcine physiology and immune systems provides a basic knowledge of graft recovery and inflammatory physiopathology through in vivo studies. In addition, pig large body size allows surgical procedures similar to humans, repeated collections of peripheral blood or renal biopsies making pigs ideal for medical training and for the assessment of preclinical technologies. However, its size is also its main drawback implying expensive housing. Nevertheless, pig models are relevant alternatives to primate models, offering promising perspectives with developments of transgenic modulation and marginal donor models facilitating data extrapolation to human conditions.

Atherosclerosis and thrombosis: insights from large animal models

Atherosclerosis and its thrombotic complications are responsible for remarkably high numbers of deaths. The combination of in vitro, ex vivo, and in vivo experimental approaches has largely contributed to a better understanding of the mechanisms underlying the atherothrombotic process. Indeed, different animal models have been implemented in atherosclerosis and thrombosis research in order to provide new insights into the mechanisms that have already been outlined in isolated cells and protein studies. Yet, although no model completely mimics the human pathology, large animal models have demonstrated better suitability for translation to humans. Indeed, direct translation from mice to humans should be taken with caution because of the well-reported species-related differences. This paper provides an overview of the available atherothrombotic-like animal models, with a particular focus on large animal models of thrombosis and atherosclerosis, and examines their applicability for translational research purposes as well as highlights species-related differences with humans.

Deciphering modifications in swine cardiac troponin I by top-down high-resolution tandem mass spectrometry

Cardiac troponin I (cTnI) is an important regulatory protein in cardiac muscle, and its modification represents a key mechanism in the regulation of cardiac muscle contraction and relaxation. cTnI is often referred to as the "gold-standard" serum biomarker for diagnosing patients with acute cardiac injury since it is unique to the heart and released into the circulation following necrotic death of cardiac tissue. The swine (Sus scrofa) heart model is extremely valuable for cardiovascular research since the heart anatomy and coronary artery distribution of swine are almost identical to those of humans. Herein, we report a comprehensive characterization of the modifications in swine cTnI using top-down high-resolution tandem mass spectrometry in conjugation with immunoaffinity chromatography purification. High-resolution high accuracy mass spectrometry revealed that swine cTnI affinity purified from domestic pig hearts was N-terminally acetylated and phosphorylated. Electron capture disassociation is uniquely suited for localization of labile phosphorylations, which unambiguously identified Ser22/Ser23 as the only basally phosphorylated sites that are well-known to be regulated by protein kinase A and protein kinase C. Moreover, a combination of tandem mass spectrometry with sequence homology alignment effectively localized a single amino acid polymorphism, V116A, representing a novel genetic variant of swine cTnI. Overall, our studies demonstrated the unique power of top-down high-resolution tandem mass spectrometry in the characterization of protein modifications, including labile phosphorylation and unexpected sequence variants.

Animal models for the assessment of novel vascular conduits

The development of an ideal small-diameter conduit for use in vascular bypass surgery has yet to be achieved. The ongoing innovation in biomaterial design generates novel conduits that require preclinical assessment in vivo, and a number of animal models have been used for this purpose. This article examines the rationale behind animal models used in the assessment of small-diameter vascular conduits encompassing the commonly used species: baboons, sheep, pigs, dogs, rabbits, and rodents. Studies on the comparative hematology for these species relative to humans are summarized, and the hydrodynamic values for common implant locations are also compared. The large- and small-animal models are then explored, highlighting the characteristics of each that determine their relative utility in the assessment of vascular conduits. Where possible, the performance of expanded polytetrafluoroethylene is given in each animal and in each location to allow direct comparisons between species. New challenges in animal modeling are outlined for the assessment of tissue-engineered graft designs. Finally, recommendations are given for the selection of animal models for the assessment of future vascular conduits.

Preclinical Models of Restenosis and Their Application in the Evaluation of Drug-Eluting Stent Systems

Coronary arterial disease (CAD) is the leading cause of death in the United States, the European Union, and Canada. Percutaneous coronary intervention (PCI) has revolutionized the treatment of CAD, and it is the advent of drug-eluting stent (DES) systems that has effectively allayed much of the challenge of restenosis that has plagued the success of PCI through its 30-year history. However, DES systems have not been a panacea: There yet remain the challenges associated with interventions involving bare metallic stents as well as newly arisen concerns related to the application of DES systems. To effectively address these novel and ongoing issues, animal models are relied on both to project the safety and efficacy of endovascular devices and to provide insight into the pathophysiology underlying the vascular response to injury and mechanisms of restenosis. In this review, preclinical models of restenosis are presented, and their application and limitation in the evaluation of device-based interventional technologies for the treatment of CAD are discussed.

In vivo veritas: Thrombosis mechanisms in animal models

Experimental models have enhanced our understanding of atherothrombosis pathophysiology and have played a major role in the search for adequate therapeutic interventions. Various animal models have been developed to simulate thrombosis and to study in vivo parameters related to hemodynamics and rheology that lead to thrombogenesis. Although no model completely mimics the human condition, much can be learned from existing models about specific biologic processes in disease causation and therapeutic intervention. In general, large animals such as pigs and monkeys have been better suited to study atherosclerosis and arterial and venous thrombosis than smaller species such as rats, rabbits, and dogs. On the other hand, mouse models of arterial and venous thrombosis have attracted increasing interest over the past two decades, owing to direct availability of a growing number of genetically modified mice, improved technical feasibility, standardization of new models of local thrombosis, and low maintenance costs. To simulate rupture of an atherosclerotic plaque, models of arterial thrombosis often involve vascular injury, which can be achieved by several means. There is no animal model that is sufficiently tall, that can mimic the ability of humans to walk upright, and that possesses the calf muscle pump that plays an important role in human venous hemodynamics. A number of spontaneous or genetically engineered animals with overexpression or deletion of various elements in the coagulation, platelet, and fibrinolysis pathways are now available. These animal models can replicate important aspects of thrombosis in humans, and provide a valuable resource in the development of novel concepts of disease mechanisms in human patients.

Melagatran for thromboprophylaxis after mechanical valve implantation: Results in a heterotopic porcine model

OBJECTIVE

Melagatran, the active form of ximelagatran, is a novel, direct thrombin inhibitor that does not have a narrow therapeutic window regarding hemorrhagic and thromboembolic events. We aimed to determine whether melagatran would be effective in preventing thrombus formation on heterotopically placed mechanical heart valves.

METHODS

A graft containing a bileaflet mechanical heart valve was implanted in the descending thoracic aorta of domestic swine. Two groups of 6 animals received daily subcutaneous injections of either melagatran (2.4 mg/kg, 3 times per day) or dalteparin (175 U/kg, 2 times per day) for 30 days. Four control animals received no anticoagulation therapy. Fecal HemoQuant and serum hemoglobin levels were recorded. Thirty days after the procedure, platelets were labeled with indium 111, the abdominal organs were inspected, and thrombi and platelets deposited on the valve were measured.

RESULTS

Median thrombus burden on the valves was 0.4 mg (interquartile range, 0.15-5.45 mg) with melagatran, 0.5 mg (interquartile range, 0-14.5 mg) with dalteparin, and 168 mg (interquartile range, 32.5-665.75 mg) for controls (melagatran vs dalteparin and control; P = .04). Median platelet deposition on the valves was 0 (interquartile range, 0-8.9 x 10(4)) with melagatran, 49.9 x 10(4) (interquartile range, 27.9 x 104-191.8 x 10(4)) with dalteparin, and 115.2 x 10(4) (interquartile range, 9.6 x 10(4)-243 x 10(4)) for controls (melagatran vs dalteparin and control; P = .02). Melagatran did not increase the risk of thromboembolism or bleeding.

CONCLUSIONS

Thrombus and platelet accumulation on the prosthetic valves was decreased by melagatran and dalteparin. The use of melagatran or other related direct thrombin inhibitors warrants further study in prophylaxis of thromboembolism in patients with mechanical heart valves.

A SWINE MODEL FOR LONG-TERM EVALUATION OF PROSTHETIC HEART VALVES

BACKGROUND

The objective of this study was to develop a porcine model of mitral valve replacement (MVR) for long-term evaluation of prosthetic heart valves.

METHODS

Sixteen 25-kg male Bama miniature pigs underwent MVR using St Jude Medical valve (21 mm). Each animal was allocated to an anticoagulation protocol after surgery (group I, s.c. heparin injection and warfarin (n = 8); group II, s.c. low-molecular-weight heparin and warfarin (n = 8)) and was followed for up to 20 weeks. Terminal studies were carried out on all animals having survived for more than 140 days or died.

RESULTS

Fourteen animals survived for more than 1 month without signs of heart failure. One of group I animals died from haemorrhagic (haemopericardium) complications on the 9th postoperative day, and another animal of group I died on the 18th postoperative day because of valve thrombosis.

CONCLUSIONS

Compared with other species, humans and pigs show remarkable anatomical and physiological similarities. This model is promising for long-term preclinical evaluation of prosthetic heart valves and evaluation of postoperative anticoagulant agents.

A Model of Heterotopic Aortic Valve Replacement for Studying Thromboembolism Prophylaxis in Mechanical Valve Prostheses

OBJECTIVES

New anticoagulants, such as direct thrombin inhibitors, have been evaluated in prevention of thromboembolism associated with atrial fibrillation and may also be useful for thromboprophylaxis of mechanical heart valves. Preclinical studies are necessary prior to human trials, but the best animal model is unknown. We, therefore, compared thrombogenicity in two porcine models of mechanical valve replacement, a standard preparation for mitral valve implantation and a simplified heterotopic model of aortic valve replacement.

METHODS

Thirteen swine underwent either mitral valve replacement (n = 6) or heterotopic aortic valve replacement (n = 7) with bileaflet mechanical valve substitutes. The heterotopic aortic valve replacement consisted of an extra-anatomical, modified valved conduit bypassing the ligated native descending thoracic aorta. At 30 d, the animals were sacrificed and the amount of valve thrombus was measured.

RESULTS

Infectious vegetations were present on two valve prostheses in animals with orthotopic mitral valves and were excluded. Mean thrombus weight for the remaining valves was 216 +/- 270 mg [95% CI -35, 466] for the animals with heterotopic aortic valve replacement and 74 +/- 67 mg [95% CI -33, 180] for animals with orthotopic mitral valve replacement (P = 0.5).

CONCLUSION

A porcine, heterotopic aortic mechanical valve replacement model appears to incite more thrombus formation than does an orthotopic mitral valve replacement model. This appears to be a more stringent model for initial testing of novel anticoagulation strategies for mechanical heart valve thromboprophylaxis.

Engineered antifouling microtopographies--correlating wettability with cell attachment

Bioadhesion and surface wettability are influenced by microscale topography. In the present study, engineered pillars, ridges and biomimetic topography inspired by the skin of fast moving sharks (Sharklet AF) were replicated in polydimethylsiloxane elastomer. Sessile drop contact angle changes on the surfaces correlated well (R2 = 0.89) with Wenzel and Cassie and Baxter's relationships for wettability. Two separate biological responses, i.e. settlement of Ulva linza zoospores and alignment of porcine cardiovascular endothelial cells, were inversely proportional to the width (between 5 and 20 microm) of the engineered channels. Zoospore settlement was reduced by approximately 85% on the finer (ca 2 microm) and more complex Sharklet AF topographies. The response of both cell types suggests their responses are governed by the same underlying thermodynamic principles as wettability.

A Long-term Porcine Model for Evaluation of Prosthetic Heart Valves

BACKGROUND

Animal experimental testing is imperative for preclinical evaluation of prosthetic heart valves and implantation techniques. Because human and pig cardiovascular structures including mitral valves show remarkable anatomical similarity, these animals are good candidates for preclinical testing. Previous attempts to establish such long-term models were hampered by both intra- and postoperative difficulties. Our aim was to overcome these difficulties to develop a porcine model for mitral valve replacement (MVR) and furthermore to investigate the practical feasibility of 3 chordal reconstruction procedures.

METHODS

Sixteen 60-kg pigs were allocated to undergo 1 of 3 surgical procedures, (1) preservation of the entire subvalvular apparatus (n = 8), (2) preservation of the secondary chordae only (n = 4), or (3) excision of the native valve and papillary resuspension with sutures (n = 4). St. Jude Medical valves (29 mm) were implanted during extracorporeal circulation and cold cardioplegic arrest. Postoperative anticoagulation was administered by subcutaneous heparin injections.

RESULTS

Fourteen animals survived 1 month, thriving and without signs of heart failure. One animal was euthanized due to irreversible bleeding in the tracheal tube, and another animal died on the third postoperative day owing to valve thrombosis.

CONCLUSION

A practically feasible long-term porcine model of MVR has been established. Because the pig is superior to other species with respect to anatomical and physiological similarity to humans, we consider this model as an optimal platform for experimental preclinical testing of heart valve prostheses.

Are standard human coagulation tests suitable in pigs and calves during extracorporeal circulation?

The thrombogenicity of membrane oxygenators as well as clotting parameters profiles, using standard human clotting tests, was analyzed in calves and pigs during 6 h perfusion. Three calves and 3 pigs were connected to extracorporeal circulation with standard heparinization. Blood samples were taken for coagulation variables throughout perfusion, and oxygenators were examined for clot deposits at the end of the experiment. Two out of 3 oxygenators of the calf group presented clot deposits while none in the pig group did. Baseline coagulation variables of pigs showed values similar to those of humans while neither extrinsic nor intrinsic pathways could be activated in calves with standard human coagulation tests. The calf model, in conclusion, was confirmed to be a difficult model for the testing of extracorporeal circulation device resistance to thrombus formation, which is, however, not reflected by standard human coagulation tests. The pig model is a better model in which both coagulation pathways could be activated with standard human coagulation tests.

Effects of intraarterial thrombin in the swine model

PURPOSE

To evaluate the effects of catheter-directed thrombin in the peripheral arterial circulation of swine.

MATERIALS AND METHODS

Thrombin was injected into a single femoral artery in 20 domestic swine. Each of five animals from four dose groups received 50, 150, 250, or 1,000 U as a single dose. Bilateral femoral arterial flow was monitored for as long as 4 hours and evaluated relative to baseline and contralateral limb flow. Interval arteriographic results were evaluated by segmental patency and a numeric angiographic score.

RESULTS

Mean baseline flow was 136 mL/min +/- 44, with an internal arterial diameter of 3.4 mm +/- 0.5. A transient increase in blood flow after thrombin administration was followed by diminished flow and thrombosis. These findings varied directly with dose and inversely with baseline flow. Angiographic and flow abnormalities generally improved with time and recovery was generally better in swine that received 50 or 1,000 U than in other groups. However, one animal that received 1,000 U (13.2 U/mL/min) developed stable, complete limb thrombosis. The degree of recovery varied with thrombin dose and thrombus location. At doses greater than 50 U (0.33 U/mL/min +/- 0.05), abnormalities were commonly persistent. Animals receiving the 150-U dose (1.33 U/mL/min +/- 0.41) had a higher incidence of persistent distal occlusion. Distal occlusions were less likely to resolve than proximal occlusions.

CONCLUSIONS

The effect of intraarterial thrombin is directly related to dose and inversely related to baseline blood flow. In swine, a threshold for significant flow disruption and thrombosis exists above a dose of 50 U (0.33 U/mL/min +/- 0.05). A threshold dose for irreversible occlusion may also exist. Although small amounts of thrombin in a high-flow vessel may not cause significant complication, administration into the arterial circulation should be avoided.

Time-Related Contact Angle Measurements with Human Plasma on Biomaterial Surfaces

Axisymmetric drop shape analysis by profile (ADSA-P) was used to assess in time contact angle changes of human plasma drops placed on four different biomaterials. Results were related with conventional blood compatibility measurements: albumin adsorption, fibrinogen adsorption and platelet adhesion. While contact angle measurements with water are material-related but constant in time, contact angle measurements with plasma changed over time owing to protein adsorption on the solid-liquid interface. The contact medium plasma did not influence the initial contact angle. Contact angles on PDMS decreased most in time (41 degrees) and demonstrated highest levels of conventionally measured albumin and fibrinogen adsorption and platelet adhesion. PTFE, with the lowest contact angle decrease over a 500 minutes period (19 degrees), showed low fibrinogen and albumin adsorption as well as low platelet adhesion. PU and HDPE demonstrated almost similar initial contact angles with plasma and contact angle decreases (26 and 27 degrees), intermediate protein adsorption, and platelet adhesion. We conclude that biocompatibility properties of the tested materials may be more related to the behaviour of their contact angles in time, than to the initial hydrophobic or hydrophilic state.