Cup inclination angle of greater than 50 degrees increases whole blood concentrations of cobalt and chromium ions after metal-on-metal hip resurfacing

Effect of Elevated Acetabular Cup on Contact and Failure Analysis in Hip Implants for Different Microseparations and Cup Inclinations Under Routine Gait Activities Using In Silico Approach

Objectives

The acetabular cup design plays a critical role in reducing contact stress between femur head acetabular cup. Many studies used ellipsoidal and spheroidal geometry in acetabular cup design to effectively reduce contact stress. The present study focuses on elevated acetabular cup rim with round corner design to reduce contact stress with round corner geometry.

Methods

The cobalt chromium femur head and cup are considered for finite element (FE) model of hip resurfacing. The gait loads of routine activities of humans like normal walking, stair ascending and descending and sitting down and getting up gait activities are applied to the developed 3D FE model. Five microseparations of 0.5, 1, 1.5, 2 and 2.5 mm are considered in the present study. The acetabular cup inclination angle considered for this study are 35°, 45°, 55°, 65° and 75°. The contact stress and von Mises stress plot for each gait activities under these microseparations are analyzed for betterment of longevity of implants.

Results

Overall elevated cup rim design helped in reducing contact stress to a greater extent than conventional cup with different geometries. Also, the predicted von Mises stress for all the parameters considered in the current study are well within the yield strength of CoCr material. Therefore, elevated cup rim could be used as a better alternative to spline and, ellipsoidal and circular geometries of cup.

Minimum 10-Year Results of Modular Metal-On-Metal Total Hip Arthroplasty

Background: this study aimed to assess the long-term outcomes of (a minimum of 10-years) total hip arthroplasty with a metal-on-metal acetabular prosthesis. Methods: Eighty-nine primary total hip arthroplasties (82 patients) were performed using a Pinnacle modular metal-on-metal acetabular prosthesis. Clinical hip function outcomes were evaluated using the Japanese Orthopaedic Association hip score preoperatively and at the final follow-up. Radiological analysis was performed at the final follow-up and magnetic resonance imaging in all hips postoperatively. Results: Out of 82 patients, 17 were excluded who were followed up for <10 years. Of the remaining 65 patients (70 hips), 19 (20 hips) developed pseudotumors during 2−10 years postoperatively. After 10 and 13 years, the survival rates of revision endpoint were 93.6% and 90.4%, respectively. Clinical hip function outcomes had improved significantly at the final follow-up. In the radiological analysis, the mean cup angle of inclination and mean ratio of femoral offset on the operated hip to the contralateral hip was highest in patients with revision surgery for adverse reactions to metal debris. Conclusions: This study showed a 29.0% prevalence of pseudotumors. Some cases required revisions even after 10 years following surgery. Regular clinical surveillance is recommended for the early detection of adverse reactions to metal debris.

Hueter Anterior Approach for Metal-on-Metal Hip Resurfacing Arthroplasty: 555 Cases at a Minimum Five-Year Follow-Up

BACKGROUND

Purpose of this study was to determine implant survivorship and resultant outcomes, including modes of failure, for metal-on-metal hip resurfacing through the Hueter anterior approach (HAA).

METHODS

Retrospective review of cases from 2006 to 2015, resulted in 555 metal-on-metal hip resurfacing via HAA, mean age 49.4 ± 6.9 years and mean BMI 28.1 ± 5.3. Kaplan-Meier curves were used to assess implant survivorship. Evaluation of technique was based on radiographic assessment of component position at 6 weeks. Patient-reported outcome measures were assessed using 12-Item Short Form Survey 12, University of California Los Angeles activity, Western Ontario and McMaster Universities Osteoarthritis Index, and hip disability osteoarthritis outcome scores.

RESULTS

At a mean follow-up of 9.18 years, survivorship was 95.0% at 5 years (95% CI: 93.2-96.8 years) and 92.5% at 10 years (95% CI: 90.0-95.0 years); men at 96.1% (95% CI: 94.3-97.9) and 93.8% (95% CI: 91.1-96.5), and women at 88.8% (95% CI: 81.9-95.7) and 85.6% (95% CI: 77.6-93.6), 5 and 10 years, respectively (P = .033). There were 37 revisions to total hips (7%) at a mean time of 3.3 years (SD 2.7). Indications for revision were aseptic loosening of acetabular (n = 12) and femoral component (n = 7) and pseudotumor (n = 6). Radiographic parameters were respectable and consistent, median acetabular inclination angle 41.2° and femoral stem shaft angle 137.7°. Patient-reported outcome measure scores significantly improved and remained stable at 2 and 5 years postoperatively.

CONCLUSION

Although choice of surgical approach should always be based on surgeon's technical expertise, this study has shown that HAA is safe and effective for hip resurfacing. Mindful attention to long-term metal ion exposure must still be considered.

Computational modelling of hip resurfacing arthroplasty investigating the effect of femoral version on hip biomechanics

Aim

How reduced femoral neck anteversion alters the distribution of pressure and contact area in Hip Resurfacing Arthroplasty (HRA) remains unclear. The purpose of this study was to quantitatively describe the biomechanical implication of different femoral neck version angles on HRA using a finite element analysis.

Materials and methods

A total of sixty models were constructed to assess the effect of different femoral neck version angles on three different functional loads: 0°of hip flexion, 45°of hip flexion, and 90° of hip flexion. Femoral version was varied between 30° of anteversion to 30° of retroversion. All models were tested with the acetabular cup in four different positions: (1) 40°/15° (inclination/version), (2) 40°/25°, (3) 50°/15°, and (4) 50°/25°. Differences in range of motion due to presence of impingement, joint contact pressure, and joint contact area with different femoral versions and acetabular cup positions were calculated.

Results

Impingement was found to be most significant with the femur in 30° of retroversion, regardless of acetabular cup position. Anterior hip impingement occurred earlier during hip flexion as the femur was progressively retroverted. Impingement was reduced in all models by increasing acetabular cup inclination and anteversion, yet this consequentially led to higher contact pressures. At 90° of hip flexion, contact pressures and contact areas were inversely related and showed most notable change with 30° of femoral retroversion. In this model, the contact area migrated towards the anterior implant-bone interface along the femoral neck.

Conclusion

Femoral retroversion in HRA influences impingement and increases joint contact pressure most when the hip is loaded in flexion. Increasing acetabular inclination decreases the area of impingement but doing so causes a reciprocal increase in joint contact pressure. It may be advisable to study femoral neck version pre-operatively to better choose hip resurfacing arthroplasty candidates.

Comparative analysis of corrosion resistance between beta titanium and Ti-6Al-4V alloys: A systematic review

BACKGROUND

The knowledge of the electrochemical property (corrosion resistance) of beta titanium alloys compared to Ti-6Al-4 V for implants is relevant because of the potential cytotoxic effects that the released ions could cause to long-term health.

OBJECTIVES

The objective of this systematic review was to seek information on the electrochemical properties (corrosion resistance) of beta titanium alloys compared to Ti-6Al-4 V since the awareness of the electrochemical behavior of the implant surface in the medium is essential for the best indication of the alloys or compositional changes, which may promote benefits to bone-implant interaction in all areas that this procedure is required.

METHODS

The PubMed, LILACS, COCHRANE Library, and Science Direct databases were electronically searched for the terms: dental implants AND beta-titanium AND Ti-6Al-4 V AND electrochemical technics. The inclusion criteria were research articles that studied beta-titanium compared to Ti-6Al-4 V using electrochemical techniques in electrolytes of chemical composition similar to body fluid, published in English, between 2000 and 2020. Articles that did not compare the corrosion resistance of these alloys in electrolytes similar to body fluids were excluded.

RESULTS

A total of 189 articles were restored and selected by title and/or abstract according to the inclusion and exclusion criteria, which resulted in 15 articles that were reduced to 8 after read in full. The studies in vitro evaluated the corrosion resistance in electrolytes Hank, Ringer, SBF, and 0.9 % NaCl, between beta titanium alloys, obtained by arc fusion or bars stock, and Ti-6Al-4 V, for dental or biomedical implants submitted to surface treatments by heat treatment, plasma electrolytic oxidation (PEO), alkaline treatment, and thermomechanical.

CONCLUSION

The evaluated literature allowed to determine that 1) The oxides Nb₂O ₅, Ta₂O _5, and ZrO₂ have higher stability and protection quality than that of TiO₂ modified by the oxides of Al and V; 2) A higher modulus of elasticity of the Ti-6Al-4 V alloy favors protection against corrosion by maintaining a thicker and more firmly adhered oxide layer; 3) The increase in the thickness of the Ti alloys superficial layer contributes to the improvement of the corrosion resistance.

Ceramic-on-metal bearing in short stem total hip arthroplasty: ions, functional and radiographic evaluation at mid-term follow-up

INTRODUCTION

The aim of this study is to evaluate clinical, radiographic and laboratory results of ceramic-on-metal (CoM) (hybrid hard bearing) in total hip arthroplasty (THA), associated with a short stem implant.

METHODS

From a cohort of 37 patients suffering from primary or secondary hip osteoarthritis who underwent THA using CoM bearing, 19 were suitable for this study. All procedures were performed by the same surgeon using a posterior-lateral approach. All patients were compared clinically using the Harris Hip Score (HHS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), visual analogue scale (VAS), 12-item Short Form Health Survey (SF12F/M), and radiographically (offset, CD angle, limb length discrepancy, cup inclination and anteversion, subsidence, osseointegration, heterotopic ossification). Blood samples were collected in order to evaluate chromium (Cr) and cobalt (Co) ions level. Radiographic evaluations were carried out by 3 different blinded surgeons. A statistical analysis was performed.

RESULTS

At a mean follow-up of 97 (73-125) months all implanted stems were well-positioned and osseointegrated. Clear improvements were observed for clinical scores comparing preoperative and postoperative values. Radiographic evaluation showed a good ability to restore proper articular geometry. Cr ion analysis revealed values below the safety threshold except for 1 case. Serum levels of Co were below the threshold in all patients. There was a statistically significant correlation only between Cr metal ions and length of follow-up.

CONCLUSIONS

CoM bearing has proven to be reliable and safe at a mean 8-year follow-up for patients in whom the components were correctly implanted. The rise of blood metal ions was minimal and involved neither systemic or local toxicity nor influenced clinical results.

In vivo sliding distance on the metal-on-polyethylene total hip arthroplasty articulation using patient-specific gait analysis

Metal-on-polyethylene (MoP) is the most commonly used bearing surface in primary total hip arthroplasty (THA). Polyethylene wear debris remains a major concern. Studies investigating the wear performance based on patient-specific in vivo kinematics and component orientation remains largely lacking. The primary goal of this study was to identify patterns of the distribution of sliding distance and cross-shear ratio among THA patients. A validated approach combining dual fluoroscopic imaging system and computed-tomography was utilized to quantify in vivo gait kinematics and component orientations in 48 total hips. The distribution of accumulated sliding distance and cross-shear ratio over the polyethylene bearing surface was calculated and analyzed using principal component analysis (PCA). Strong patient-specific variation in sliding distance and cross-shear ratio was observed. PCA detected two principal components (PCs) of the sliding distance that together contribute to 94.8% of the total variation. PCA detected four PCs that together contribute to 86% of the total variation of the cross-shear ratio. Regression analysis identified a positive association between cross-shear magnitude and axial and frontal range of motion (RoM). Increased cup inclination, stem anteversion, and reduced cup anteversion may lead to superiorly distributed high cross-shear region, potentially accelerating wear. Our study investigated, in vivo sliding distance and cross-shear pattern using a comprehensive patient-specific dataset and detected several wear indicators under in vivo conditions. These findings provided useful reference values that may help to assess wear in MoP THA patients. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:3151-3160, 2018.

A comparison of the effect of large and small metal-on-metal bearings in total hip arthroplasty on metal ion levels and the incidence of pseudotumour

Aims

The purpose of this study was to compare two different types of metal-on-metal (MoM) bearing for total hip arthroplasty (THA): one with a large femoral head (38 mm to 52 mm) and the other with a conventional femoral head (28 mm or 32 mm). We compared clinical outcome, blood metal ion levels, and the incidence of pseudotumour in the two groups.

Patients and Methods

Between December 2009 and December 2011, 62 patients underwent MoM THA with a large femoral head (Magnum group) and 57 patients an MoM THA with a conventional femoral head (conventional group). Clinical outcome was assessed using the Harris Hip score, University of California, Los Angeles (UCLA) activity score and EuroQol-5D (EQ-5D). Blood metal ion levels were measured and MRI scans were analyzed at a minimum of five years postoperatively.

Results

No acetabular component was implanted with more than 50° of inclination in either group. The Harris Hip Score, UCLA activity score, and EQ-5D improved postoperatively in both groups; no significant clinical differences were noted between the groups. The blood cobalt ion levels in the conventional group continued to rise postoperatively to five years while reaching a plateau at two years postoperatively in the Magnum group. At five years, the mean cobalt ion level of 1.16 μg/l (sd 1.32) in the Magnum group was significantly lower than the 3.77 μg/l (sd 9.80) seen in the conventional group (p = 0.0015). The incidence of moderate to severe pseudotumour was 4.7% in the Magnum group and 20.6% in the conventional group. There were no dislocations in the Magnum group and two in the conventional group. One patient in the Magnum group underwent revision for pseudotumour at 4.7 years postoperatively.

Conclusion

At five years, a well-positioned large head MoM THA has a significantly lower level of metal ion release and a lower incidence of moderate to severe pseudotumour than a MoM bearing of conventional size. Cite this article: Bone Joint J 2018;100-B:1018–24.

Long-term clinical results of the Metasul metal-on-metal total hip arthroplasty: 12.6 years follow-up of 128 primary total hip replacements

INTRODUCTION

The purpose of the present study is to report the long-term clinical results of an uncemented total hip arthroplasty (THA) using a Metasul metal-on-metal (MoM) 28-mm bearing and to evaluate the long-term serum cobalt levels.

METHODS

At an average of 12.6 years following primary THA, we retrospectively reviewed the clinical results of the first 116 consecutive patients (128 THAs) in our institution who underwent 28-mm Metasul MoM THA. Of the 78 patients who were able to visit our outpatient clinic, serum cobalt levels were evaluated.

RESULTS

The overall survival rate of the cohort was 96.1% (95% confidence interval [CI], 93.2-99.6), 12.6 years (95% CI, 12.3-12.7 years) following surgery. 3 patients had undergone revision due to aseptic loosening of the stem and 2 patients sustained a periprosthetic fracture. The average modified Harris Hip Score was 90 (72-97) and the average Oxford Hip Score was 56 (48-60), representing both excellent outcome scores. The average serum cobalt of the entire cohort was 20.1 nmol/L (range 8.5-227.7 nmol/L). Serum cobalt levels of patients with a bilateral MoM THA were significantly higher (35.0 nmol/l, p<0.01). No relation between serum cobalt levels, subjective outcome, radiolucent lines on radiographs and survivorship of the implant was noted.

CONCLUSIONS

Long-term results of the metasul MoM bearing articulation in THA seem to be excellent, although cobalt serum levels should be monitored closely.

Damage Assessment of Retrieved Birmingham Monoblock Cups: Is Conversion to Dual-Mobility Head a Viable Revision Option?

BACKGROUND

A novel revision technique for failed hip resurfacings involves retention of the acetabular cup, if well-fixed, which is mated to dual-mobility (DM) prosthesis in a traditional hip replacement configuration. It is unknown whether existing damage on the retained cup will result in unacceptable wear of the DM prosthesis.

METHODS

Thirty retrieved Birmingham (Smith & Nephew) monoblock cups were visually scored for damage features and area of coverage. Surface roughness measurements were obtained within each damage feature as well as reference points on each cup. Analysis of prior metal-on-metal wear was also performed to determine the maximum change in diameter of the cup.

RESULTS

Scratching and grooving (deep, singular scratches) were the most common damage features. Overall bearing surface roughness was estimated as 0.059 μm (±0.030 μm) based on percent area coverage of each damage feature. Dimensional change of the bearing surface was negligible for most cups (18 of 30) but ranged from 0.20 to 0.38 mm for the most severely worn samples (5 of 30).

CONCLUSION

Average surface roughness of the retrieved Birmingham cups was low, suggesting an expected 10%-20% increase in DM prosthesis wear. Similarly, dimensional change of the cup due to prior wear is not believed to significantly affect wear. Our findings support the use of a DM head in appropriate scenarios but suggest caution when applied to younger, more active patients whom may be adversely affected by increased prosthesis wear in the long term.

Frank Stinchfield Award: Identification of the At-risk Genotype for Development of Pseudotumors Around Metal-on-metal THAs

BACKGROUND

Once touted as the future of hip arthroplasty, metal-on-metal (MoM) bearing surfaces have fallen sharply from favor with the emergence of a strong body of evidence demonstrating unacceptably high premature implant failure rates. The previously unpredictable development of adverse local tissue reactions (ALTRs) has been a substantive contributor to this. Although the underlying pathophysiology of these so-called "pseudotumors" is now well understood, the fundamental predisposing patient risk factors have remained elusive.

QUESTIONS/PURPOSES

The aim of this research, as a clinical-genotype correlation analysis, was to identify specific alleles (genes) associated with the development of ALTRs in patients with in situ MoM THAs.

METHODS

A case-control study of patients who received a large-head, primary MoM THA between 2005 and 2008 was performed with a minimum followup of 5 years. Twenty-six patients who had undergone revision of a primary MoM THA secondary to symptomatic ALTRs were recruited. The mean timeframe from primary MoM THA to symptomatic revision was 5.5 years (range, 1-10 years). Twenty-eight control subjects were randomly selected asymptomatic patients with no evidence of ALTRs on protocol-specific screening. Baseline demographics and high-resolution genotype (human leukocyte antigen [HLA] Class II) were collected for all patients. Cohorts were similar with respect to age at the time of primary MoM THA (mean, 54.8 versus 54.9 years, p = 0.95) and serum cobalt (mean, 5.5 versus 8.5 μg/L, p = 0.09) and chromium concentrations (mean, 2.9 versus 4.2 μg/L, p = 0.27). The association between genotype and revision surgery secondary to ALTRs was determined with gender as a covariate.

RESULTS

The prevalence of the risk genotype was 30% (16 of 54) among the entire cohort. Adjusting for sex, the odds of revision were 6.1 times greater among patients with the risk genotype present than among patients without (95% confidence interval [CI], 1.5-25.4; p = 0.01). Among females, the specificity of the risk genotype was 1.0 (95% CIexact, 0.5-1.0; pexact = 0.03), and for males, it was 0.8 (95% CIexact, 0.6-0.9; pexact < 0.01).

CONCLUSIONS

The findings of this study suggest that, among patients with a primary MoM THA, allelic variation within the HLA Class II loci may be a strong, independent risk factor associated with the need for subsequent revision surgery secondary to pseudotumor formation.

CLINICAL RELEVANCE

Given the hypothesis-generating nature of this novel undertaking, confirmatory prospective clinical studies are required to further elucidate this correlation and to explore the clinical utility of targeted genetic screening in this specific population. This research may, however, represent a key missing piece in the puzzle that is metal ion-induced pseudotumor formation.

The effect of seated pelvic tilt on posterior edge-loading in total hip arthroplasty: A finite element investigation

Edge-loading of a ceramic-on-ceramic total hip replacement can lead to reproducible squeaking and revision. A patient’s functional acetabular cup orientation, driven by their pelvic tilt, has been shown to be a significant factor in squeaking during hip flexion. The aim of this study was to investigate the effect of seated pelvic tilt on the contact mechanics at the ceramic bearing surface. A finite element model of a ceramic-on-ceramic total hip replacement was created. The cup was orientated at 40° inclination and 15° anteversion relative to the anterior pelvic plane. The stem was flexed 90° to replicate sitting in a chair. The model was loaded using data from in vivo measurements taken during a sit-to-stand activity. The pelvis was modelled in seven different sagittal positions, ranging from −30° to 30° of pelvic tilt, where a positive value denotes anterior pelvic tilt. Three different head sizes were investigated: 32, 36 and 40 mm. The maximum contact pressure and contact patch to rim distance were determined for each of the 21 simulations. Edge-loading (contact patch to rim distance < 0 mm) occurred with all head sizes when seated pelvic tilt was ≥10° and induced a large increase in contact pressure on the liner, with a maximum pressure exceeding 500 MPa. Edge-loading initiated at seated pelvic tilts of 7°, 9° and 5° for the 32, 36 and 40 mm heads, respectively. Patients with anterior pelvic tilts in the seated position are susceptible to posterior edge-loading. As the position of the pelvis when seated is patient specific, cup orientation should be adjusted on an individual basis to minimise edge-loading.

Long-term results of Birmingham hip resurfacing arthroplasty in Asian patients

Several reports have shown good long-term results with the Birmingham hip resurfacing (BHR) arthroplasty, but little is known about the results in Asian countries where there is a high prevalence of osteonecrosis and developmental dysplasia of the hip, and many females with small femoral head sizes. Therefore, we retrospectively evaluated the long-term clinical results of the BHR in 112 Japanese patients (53 males and 59 females-130 hips) with an average age of 52 years. Implant survivorship was analyzed using the Kaplan-Meier method with the endpoint being revision for any reason. Factors such as sex, femoral component size, and type of hip disease were analyzed as predictors of implant survivorship. With a median follow-up of 12 years, six cases were revised (two for femoral component aseptic loosening, two for infection, one for cup aseptic loosening, and one for femoral neck fracture), and the overall survival rate was 96.5% (95% CI 90.9-98.7) at 10 years and 93.6% (95% CI 83.4-97.7) at 15 years. When septic revisions were excluded, the implant survival rate was 98.2% (95% CI 92.9-99.6) at 10 years and 95.3% (95% CI 83.9-98.7) at 15 years. Sex, femoral component size, and type of hip disease were not predictors of implant survivorship. In conclusion, good clinical results were obtained with the BHR at 10- and 15-year follow-up in Japanese patients who have different stature and types of hip diseases as compared with patients in Western countries.

Cobalt toxicity in humans-A review of the potential sources and systemic health effects

Cobalt (Co) and its compounds are widely distributed in nature and are part of numerous anthropogenic activities. Although cobalt has a biologically necessary role as metal constituent of vitamin B₁₂, excessive exposure has been shown to induce various adverse health effects. This review provides an extended overview of the possible Co sources and related intake routes, the detection and quantification methods for Co intake and the interpretation thereof, and the reported health effects. The Co sources were allocated to four exposure settings: occupational, environmental, dietary and medical exposure. Oral intake of Co supplements and internal exposure through metal-on-metal (MoM) hip implants deliver the highest systemic Co concentrations. The systemic health effects are characterized by a complex clinical syndrome, mainly including neurological (e.g. hearing and visual impairment), cardiovascular and endocrine deficits. Recently, a biokinetic model has been proposed to characterize the dose-response relationship and effects of chronic exposure. According to the model, health effects are unlikely to occur at blood Co concentrations under 300μg/l (100μg/l respecting a safety factor of 3) in healthy individuals, hematological and endocrine dysfunctions are the primary health endpoints, and chronic exposure to acceptable doses is not expected to pose considerable health hazards. However, toxic reactions at lower doses have been described in several cases of malfunctioning MoM hip implants, which may be explained by certain underlying pathologies that increase the individual susceptibility for Co-induced systemic toxicity. This may be associated with a decrease in Co bound to serum proteins and an increase in free ionic Co²⁺. As the latter is believed to be the primary toxic form, monitoring of the free fraction of Co²⁺ might be advisable for future risk assessment. Furthermore, future research should focus on longitudinal studies in the clinical setting of MoM hip implant patients to further elucidate the dose-response discrepancies.

Contact patch to rim distance: the quintessential tool for metal-on-metal bearing in vivo performance analysis - a review

With metal-on-metal (MoM) bearings, fluid film lubrication is disrupted when the contact patch area between the femoral head and the cup is close to the edge of the acetabular component, making the calculation of the contact patch to rim (CPR) distance a key variable in the study of the performance of MoM bearings. A few research centers have used models of varying complexity to calculate the CPR distance and determine its relationship with assessments of component wear. In this review, we aimed to summarise the current knowledge related to the application of CPR distance calculations in the study of in vivo performance of MoM bearings. Our systematic search of the US National Library of Medicine yielded 9 relevant publications in which 3 different models were used for the computation of the CPR distance. The 3 models show different levels of complexity and their use is mainly dependent upon the size of the subject sample and the nature of the data collected as a dependent variable. The studies reviewed consistently showed a strong inverse correlation between CPR distance and wear or metal ion levels suggesting that any study aiming to determine the risk factors for MoM hip devices needs to include an assessment of CPR distance. Cup anteversion can be measured reliably with various tools and should not be an obstacle to the use of this essential variable that is CPR distance.

601 metal-on-metal total hip replacements with 36 mm heads a 5 minimum year follow up: Levels of ARMD remain low despite a comprehensive screening program

BACKGROUND

We conducted a retrospective study to assess the clinical outcome, failure rate, and reason for failure of a large consecutive series of 36 mm MoM Corail/Pinnacle total hip replacements (THRs).

METHODS

Between 2006 and 2011, 601 consecutive 36 mm MoM THRs were performed (585 patients). Patients were followed according to the UK Medicines and Healthcare Products Regulatory Agency (MHRA) guidelines. All patients were accounted for and 469 patients (78%) were clinically and radiographically assessed. 328 females and 141 males with a median age of 73 (range 36-94 years) and a median follow up of 7.2 years (range 5.2-9.7 years) were followed. Clinical data included blood cobalt and chromium, Oxford Hip Score (OHS), plain radiograph, ultrasound of hip and intra-operative findings in those patients who had revision surgery.

RESULTS

56 patients died of causes unrelated to their hip replacement. The mean survivorship of the implant was 92.8% (range 91.6-94%, 95% CI) at a median time to follow up of 84 months (62-113 months). The functional outcome was good with a median OHS of 38 out of 48 (23-44). The dislocation rate was 0.99%, with all these 6 cases requiring revision. 476 patients had blood tests. 100 patients (21%) had elevated levels of either cobalt above MHRA guidelines of 7 parts per billion (120 and 135 nmol/L respectively for cobalt and chromium). Cobalt was elevated independently of chromium in 75% of the cases (but never vice versa). The mean cup inclination angle was 42°. Each incremental stem size increase resulted in a decrease in cobalt by 11 nmol/L. The most common reason for revision was adverse reaction to metal debris (ARMD) (12 cases).

CONCLUSION

This paper is the largest and longest follow up of 36 mm MoM THRs. Using the MHRA guidelines for follow up, the revision rates of this cohort has remained low compared to other studies, but unacceptably higher than that of other bearing surfaces.

LEVEL OF EVIDENCE

III.

Does a titanium sleeve reduce the frequency of pseudotumors in metal-on-metal total hip arthroplasty at 5-7years follow-up?

INTRODUCTION

Little is known about pseudotumor frequency and risk factors for pseudotumor formation among different types of metal-on-metal (MoM) hip arthroplasties. A lower release of chromium and cobalt have been reported in MoM hip arthroplasties with a titanium sleeve compared to MoM designs without a titanium sleeve, but yet it is unknown whether a titanium sleeve reduces the pseudotumor frequency. We conducted a cross-sectional study to investigate: 1) pseudotumor frequency, 2) risk factors of pseudotumor formation 3) and correlations between pseudotumors, serum metal-ions, implant position, and clinical symptoms.

HYPOTHESIS

We expected a lower pseudotumor frequency in MoM hip articulation with a titanium sleeve than reported in MoM hip articulation designs using chromium-cobalt sleeve.

MATERIALS AND METHOD

A consecutive series of 41 patients/49 hips (31 males), mean age 52 (28-68) years, participated in a 5.5±0.5 (4-6.5) year follow-up study of their M2a_Magnum hip articulation (Biomet Inc., Warsaw, Indiana, USA). Patients were evaluated with magnetic resonance imaging (MRI), measurements of serum metal-ions, plain radiographs, and clinical outcome measures of Harris Hip Score (HHS) and Oxford Hip Score (OHS).

RESULTS

Eighteen of 47 hips (38%) had MRI-verified pseudotumors, all cystic, with a mean dimension of 10.6×25.6×41mm. Digital measurements on plain radiographs revealed a higher cup anteversion in patients with a pseudotumor of mean 28.4°±5.05° compared to mean 23.5°±6.5° in patients without a pseudotumor (P=0.009). Serum metal-ion concentrations, acetabular cup inclination and measures of HHS and OHS were similar between patients with and without a pseudotumor (P>0.46).

CONCLUSION

At 5.5±0.5years after surgery, MRI-verified cystic pseudotumors were frequently observed in M2a_Magnum hip articulations despite the use of titanium sleeves. The pseudotumors were related to high cup anteversion angles but not related to high serum metal-ions or clinical symptoms.

LEVEL OF EVIDENCE

IV: cross-sectional study.

Hip resurfacing: history, current status, and future

Hip resurfacing arthroplasty (HRA) presents several advantages over conventional total hip arthroplasty (THA), including conservation and preservation of bone, reduced risk of dislocation, easy replication of hip biomechanics and easy revision if needed. It is a particularly appealing procedure for young patients. HRA has been performed for over 40 years following the same technological advances as THA. The bearing material used by most designs is metal-on-metal (MoM), which has the best compromise between strength and wear properties. However, MoM HRA has a specific set of possible complications. Aseptic femoral failures were initially the most prevalent cause for revision but progress in patient selection and surgical technique seem to have resolved this problem. Wear-related failures (high metal ion levels and adverse local tissue reactions) are now the main concern, and are essentially associated with poor acetabular component design and orientation, to which MoM is more sensitive than other bearing materials. The concept of functional coverage is key to understanding how MoM bearings are affected by edge wear. Only a 3-D assessment of cup position (e.g., the contact patch to rim distance) provides the necessary information to determine the role of cup positioning in relationship with abnormal bearing wear.The concept of hip resurfacing is more valid today than ever as the age of the patients in need of hip arthroplasty keeps getting lower. The recent publication of several excellent long-term survivorship results suggests that selection of a well-designed resurfacing system and accuracy in the placement of the cup can achieve long-term durability.

Medium-term results following large diameter metal-on-metal total hip arthroplasty: increasing failure after 6 years

PURPOSE

The main aim of our study is to report the medium-term survivorship of Birmingham Hip Resurfacing (BHR) cup and a large modular metal head (MMT) on an uncemented Freeman femoral stem. No results have been reported till date with these implants combinations.

METHODS

A total of 205 metal-on-metal total hip replacements (MoM THRs) were performed on 190 patients from October 2002 to November 2004. Prior to the Medicines and Healthcare Products Regulatory Agency (MHRA) guidelines, the patients were followed up at 3, 6 and 12 months postoperatively and annually thereafter. Following the MHRA alert in 2010, the patients were followed-up as per the MHRA guidelines.All statistical analyses were conducted using Stata 13.

RESULTS

At a mean follow-up of 10.5 years, a total of 42 out of 205 hips were revised for reasons related to ALTR. The failure rates increased significantly over time (7% at 6 years and 29% at 10-year follow-up). The analysis showed no statistically significant association to age, gender, side, BMI or component size or position (p&lt;0.05). Blood metal ions showed a poor discriminant ability to separate failed from well-functioning MoM hip replacements.

CONCLUSIONS

Large head MoM BHR on an uncemented stem has extremely high failure rate. The authors do not recommend the use of large head MoM articulation in total hip arthroplasty in the wake of this report and similar findings across the world. Continued surveillance of these implants is required as the failure rates increase with time.

Corrosion at the head-neck interface of current designs of modular femoral components

There is increasing global awareness of adverse reactions to metal debris and elevated serum metal ion concentrations following the use of second generation metal-on-metal total hip arthroplasties. The high incidence of these complications can be largely attributed to corrosion at the head-neck interface. Severe corrosion of the taper is identified most commonly in association with larger diameter femoral heads. However, there is emerging evidence of varying levels of corrosion observed in retrieved components with smaller diameter femoral heads. This same mechanism of galvanic and mechanically-assisted crevice corrosion has been observed in metal-on-polyethylene and ceramic components, suggesting an inherent biomechanical problem with current designs of the head-neck interface.

We provide a review of the fundamental questions and answers clinicians and researchers must understand regarding corrosion of the taper, and its relevance to current orthopaedic practice.

Cite this article: Bone Joint J 2016;98-B:579–84.

Midterm results of 36 mm metal-on-metal total hip arthroplasty

BACKGROUND

Despite the many perceived benefits of metal-on-metal (MoM) articulation in total hip arthroplasty (THA), there have been growing concerns about metallosis and adverse reaction to metal debris (ARMD). Analysis of size 36 mm MoM articulation THAs is presented. These patients were evaluated for patient characteristics, relationship between blood metal ions levels and the inclination as well as the version of acetabular component, cumulative survival probability at final followup and functional outcome at final followup.

MATERIALS AND METHODS

288, size 36 mm MoM THAs implanted in 269 patients at our institution from 2004 to 2010 were included in this retrospective study. These patients were assessed clinically for hip symptoms, perioperative complications and causes of revision arthroplasty were analysed. Biochemically, blood cobalt and chromium metal ions level were recorded and measurements of acetabular inclination and version were examined. Radiological evaluation utilizing Metal Artefact Reduction Sequence (MARS) MRI was undertaken and implant cumulative survivorship was evaluated.

RESULTS

The mean followup was 5 years (range 2-7 years), mean age was 73 years and the mean Oxford hip score was 36.9 (range 5-48). Revision arthroplasty was executed in 20 (7.4%) patients, of which 15 patients underwent single-stage revision THA. The causes of revision arthroplasty were: ARMD changes in 6 (2.2%) patients, infection in 5 (1.9%) patients and aseptic loosening in 5 (1.9%) patients. Three (1.1%) patients had their hips revised for instability, 1 (0.3%) for raised blood metal ions levels. The implant cumulative survival rate, with revision for any reason, was 68.9% at 7 years.

CONCLUSIONS

Although medium-sized MoM THA with a 36 mm head has a marginally better survivorship at midterm followup, compared to larger size head MoM articulating THA, our findings nonetheless are still worryingly poor in comparison to what has been quoted in the literature. Furthermore, ARMD-related revision remains the predominant cause of failure in this cohort with medium-sized MoM articulation. No correlation was found between blood metal ions levels and the inclination as well as the version of acetabular component.

Changes in Intra-pelvic Obliquity Angle 0-2 Years After Total Hip Arthroplasty and Its Effects on Leg Length Discrepancy: A Retrospective Study

Background:

Total hip arthroplasty (THA) is one of the most effective treatments for phase III and IV hip arthrosis. Lower limb length balancing is one of the determining factors of a successful surgery, particularly in patients with developmental dysplasia of the hip (DDH). The purpose of this study was to evaluate the postoperative change in intra-pelvic obliquity (intra-PO) angle in the coronal plane and its effects on leg length discrepancy (LLD) within 2 years.

Methods:

A total of 78 patients (70 females, 8 males) were enrolled in this study. All patients were suffering from DDH with varying degrees of LLD. Pelvic plain radiographs were collected before and after the operation. The intra-PO angles were measured 0, 0.5, 1 and 2 years after THA. At the same time, postoperative LLD was measured with blocking test.

Results:

PO changed significantly in the first year after THA surgery (0 year vs. 0.5 year, P < 0.01; 0.5 year vs. 1 year, P < 0.01), and the changing value of intra-PO angle (ΔPO) slowed down substantially during the first 2 years after THA (0.5 year vs. 0.5–1 year, P < 0.01; 0.5–1 year vs. 1–2 years, P < 0.01). With the change in intra-PO angle, LLD also got narrow within the 1st year (0 year vs. 0.5 year, P < 0.01; 0.5 year vs. 1 year, P < 0.01). Elderly patients had a smaller intra-PO angle reduction (Group A vs. Group B, P = 0.01; Group B vs. Group C, P < 0.01).

Conclusions:

Intra-PO angle and LLD gap narrowed with time after THA surgery. In particular, elderly patients had smaller change in intra-PO angle.

Do hardened femoral heads reduce blood metal ion concentrations after hip resurfacing?

BACKGROUND

Elevated cobalt and chromium ion concentrations have been associated with the use of metal-on-metal bearings in hip arthroplasty. The use of a differential hardness bearing may reduce metal particle release. The aim of our study was to compare circulating cobalt (Co) and chromium (Cr) ion levels between patients treated with a standard all 'as-cast' heat treated bearing and a differential hardness bearing.

MATERIALS AND METHODS

One hundred and thirty-two patients implanted with unilateral hip resurfacing arthroplasties and having had blood metal ion studies performed between one and six years after surgery were retrospectively selected. There were 73 patients in the standard all 'as cast' heat treated bearing group (group 1) and 59 in the differential hardness bearing group (group 2).

RESULTS

Clinical and quality of life scores were comparable between groups. The median Co in group 1 was 1.01 µg/L and 1.23 µg/L in group 2 (p = 0.0566). The median Cr in group 1 was 1.60 µg/L and 1.34 µg/L in group 2 (p = 0.0505).

CONCLUSION

Compared with conventional heat-treated CoCr bearings, differential hardness metal-on metal bearings do not confirm in vivo the hopes of a substantial reduction in circulating metal ions concentrations suggested by in vitro wear studies.

What are the predictors and prevalence of pseudotumor and elevated metal ions after large-diameter metal-on-metal THA?

BACKGROUND

Soft tissue masses, or "pseudotumors," around metal-on-metal total hip arthroplasty (MoM THA) have been reported frequently; however, their prevalence remains unknown. Several risk factors, including elevated metal ion levels, have been associated with the presence of pseudotumor, although this remains controversial.

QUESTIONS/PURPOSES

The goals of this study were to (1) determine the prevalence of pseudotumors after large-diameter head MoM THA; (2) identify risk factors associated with pseudotumor formation and elevated metal ion levels; and (3) determine the early failure rate of large-diameter MoM THA.

METHODS

Between December 2005 and November 2012, 258 hips (215 patients) underwent large-diameter head primary MoM THA at our institution. Clinical followup was obtained in 235 hips (91%). Using an inclusion criteria of a minimum followup of 1 year, a subset of 191 hips (mean followup, 4 years; range, 1-7 years) was recruited for high-resolution ultrasound screening for the presence of pseudotumor. Whole blood cobalt and chromium ion levels, UCLA activity level, WOMAC score, patient demographics as well as surgical, implant, and radiographic data were collected. Bivariate correlations and multivariate log-linear regression models were used to compare the presence of pseudotumor and elevated metal ions with all other factors.

RESULTS

Ultrasound detected a solid, cystic, or mixed mass in 20% hips (38 of 191). No correlation was found between the presence of pseudotumor and any risk factor that we examined. After controlling for confounding variables, elevated cobalt ions were correlated (p<0.001, R=0.50, R2=0.25) with smaller femoral head size, the presence of bilateral MoM THA, and female sex. Elevated chromium ions were correlated (p<0.001, R=0.59, R2=0.34) with smaller femoral head size, presence of bilateral MoM THA, and lower body mass index. The overall survival of MoM THA was 96% at a mean followup of 4.5 years (range, 2-8 years).

CONCLUSIONS

With the numbers available, we found no associations between the presence of pseudotumor and the potential risk factors we analyzed, including elevated metal ion levels. Further work is needed to explain why larger femoral head sizes resulted in lower metal ion levels despite being associated with higher early failure rates in joint registry data.

LEVEL OF EVIDENCE

Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

The influence of pelvic tilt on acetabular orientation and cover: a three-dimensional computerised tomography analysis

The orientation of the pelvis influences that of the acetabulum. In particular, pelvic tilt in the sagittal plane may lead to inaccurate interpretation of plain pelvic radiographs. We therefore quantified the relationship between this pelvic tilt and acetabular orientation in native hips, and determined whether pelvic tilt affects femoral head cover. We analysed computed tomography scans of 93 hips (36 normal, 31 dysplastic, 26 with acetabular retroversion) and measured acetabular anteversion, inclination, and femoral head cover at pelvic tilt angles ranging from -20° to 20° in relation to the anterior pelvic plane using 5° increments. Pelvic tilt changed acetabular version with a decrease in anteversion ranging from 2.5° to 5° for every 5° of forward tilt. The effect on inclination was less marked and varied. In normal and dysplastic hips pelvic tilt increased apparent femoral head cover. A greater understanding of the influence of pelvic tilt may allow improvements in the radiological diagnosis and surgical treatment of acetabular abnormalities, particularly in relation to acetabular reorientation procedures and femoroacetabular impingement.

Implication of femoral stem on performance of articular surface replacement (ASR) XL total hip arthroplasty

Taper junctions of large diameter metal-on-metal femoral heads and femoral stems were described as metal ion generator due to accelerated wear and corrosion. However, literature about the Articular Surface Replacement (ASR) total hip arthroplasty (THA) invariably deals with stems manufactured by DePuy Orthopedics (Warsaw, IN, USA). Nothing is known whether different stems with common 12/14 mm tapers affect failure rate or ion release. 99 ASR THA (88 patients) implanted with CoxaFit or ARGE Geradschaft stems (K-Implant, Hannover, Germany) were retrospectively analyzed. After a mean follow-up of 3.5 years revision rate was 24.5%, mostly due to adverse reaction to metal debris (ARMD). CT scan revealed component loosening in 10.3% and pseudotumoral lesions in 12.6%. Elevated ion concentrations (>7 μg/l) were found in 38.6%.

Two-year serum metal ion levels in minimally invasive total conservative hip resurfacing: preliminary results of a prospective study

BACKGROUND

Metal-on-metal (MoM) hip resurfacings have been associated with the potential development of metallic debris and its associated pathology. Serum cobalt and chromium levels are a reliable surrogate marker of wear rates in MoM bearings. The aim of the study was to examine the trend in serum metal ion levels in the initial 2-year post-operative period following implantation of the minimally invasive total conservative hip MoM hip resurfacing and to determine whether head size, acetabular component orientation, clinical outcome scores or post-operative range of movement would affect these levels.

METHODS

In this prospective cohort study, serum cobalt and chromium ion levels were measured pre- and post-operatively in 25 patients who underwent minimally invasive total conservative hip MoM hip resurfacing. The results were correlated with acetabular component orientation, head size, outcome scores and post-operative range of movement.

RESULTS

The mean serum cobalt and chromium levels at 2 years were 1.2 ppb (0.4-4.4 ppb) and 2.1 ppb (0.7-5.7 ppb). The mean cup inclination was 43° (30°-60°) and anteversion was 18° (1°-47°). There was no clear relationship between serum ions and acetabular component orientation, outcome scores or range of movement. Patients with a head size ≤52 mm had significantly higher metal ion levels (cobalt P = 0.02, chromium P = 0.045).

CONCLUSION

Our preliminary results show all patients had cobalt and chromium levels below those indicating a high-risk implant, suggesting successful early outcome from minimally invasive total conservative hip resurfacing surgery.

Potential release of in vivo trace metals from metallic medical implants in the human body: from ions to nanoparticles--a systematic analytical review

Metal ion release from metallic materials, e.g. metallic alloys and pure metals, implanted into the human body in dental and orthopedic surgery is becoming a major cause for concern. This review briefly provides an overview of both metallic alloys and pure metals used in implant materials in dental and orthopedic surgery. Additionally, a short section is dedicated to important biomaterials and their corrosive behavior in both real solutions and various types of media that model human biological fluids and tissues. The present review gives an overview of analytical methods, techniques and different approaches applied to the measurement of in vivo trace metals released into body fluids and tissues from patients carrying metal-on-metal prostheses and metal dental implants. Reference levels of ion concentrations in body fluids and tissues that have been determined by a host of studies are compiled, reviewed and presented in this paper. Finally, a collection of published clinical data on in vivo released trace metals from metallic medical implants is included.

Wear analysis of 39 conserve plus metal-on-metal hip resurfacing retrievals

There have been increasing concerns regarding adverse local tissue reactions (ALTR) following metal-on-metal (MOM) hip arthroplasties. This study examined wear rates in retrievals of one design of MOM resurfacing arthroplasty, and assessed the differences in wear between those with and without ALTR. Wear measurements were made on 39 MOM resurfacing components (30 femoral, 9 acetabular) which were at least 2years in vivo. Seven hips (6 patients; 4 acetabular components, 7 femoral components) were identified to have ALTR. Acetabular component abduction and anteversion angles were determined using EBRA, and the contact-patch-to-rim (CPR) distance was calculated. The ALTR group had higher linear femoral and acetabular wear rates, acetabular anteversion and abduction angles, lower CPR, and longer time to revision. Given the increased risk for ALTR associated with acetabular component malpositioning, patients with malpositioned acetabular components may require closer clinical follow-up and monitoring.

Does bearing size influence metal ion levels in large-head metal-on-metal total hip arthroplasty? A comparison of three total hip systems

BACKGROUND

The purpose of the study was twofold: first, to determine whether there is a statistically significant difference in the metal ion levels among three different large-head metal-on-metal (MOM) total hip systems. The second objective was to assess whether position of the implanted prostheses, patient demographics or factors such as activity levels influence overall blood metal ion levels and whether there is a difference in the functional outcomes between the systems.

METHODS

In a cross-sectional cohort study, three different metal-on-metal total hip systems were assessed: two monoblock heads, the Durom socket (Zimmer, Warsaw, IN, USA) and the Birmingham socket (Smith and Nephew, Memphis, TN, USA), and one modular metal-on-metal total hip system (Pinnacle, Depuy Orthopedics, Warsaw, IN, USA). Fifty-four patients were recruited, with a mean age of 59.7 years and a mean follow-up time of 41 months (12 to 60). Patients were evaluated clinically, radiologically and biochemically. Statistical analysis was performed on all collected data to assess any differences between the three groups in terms of overall blood metal ion levels and also to identify whether there was any other factor within the group demographics and outcomes that could influence the mean levels of Co and Cr.

RESULTS

Although the functional outcome scores were similar in all three groups, the blood metal ion levels in the larger monoblock large heads (Durom, Birmingham sockets) were significantly raised compared with those of the Pinnacle group. In addition, the metal ion levels were not found to have a statistically significant relationship to the anteversion or abduction angles as measured on the radiographs.

CONCLUSIONS

When considering a MOM THR, the use of a monoblock large-head system leads to higher elevations in whole blood metal ions and offers no advantage over a smaller head modular system.

Do young, active patients perceive advantages after surface replacement compared to cementless total hip arthroplasty?

BACKGROUND

Potential advantages suggested but not confirmed for surface replacement arthroplasty (SRA) over THA include lower frequency of limp, less thigh pain, less limb length discrepancy, and higher activity.

QUESTIONS/PURPOSES

We therefore determined whether patients having SRA had a limp, thigh pain, or limb length discrepancy less frequently or had activity levels higher than patients having THA.

METHODS

In a multicenter study, we surveyed 806 patients aged 18 to 60 years with a premorbid UCLA activity score of 6 or more who underwent hip arthroplasty for noninflammatory arthritis at one of five orthopaedic centers. Patients had either a cementless THA with an advanced bearing surface (n = 682) or an SRA (n = 124). The patients were demographically comparable. Specific telephone survey instruments were designed to assess limp, thigh pain, perception of limb length, and activity levels. Minimum followup was 1 year (mean, 2.3 years; range, 1.1-3.9 years).

RESULTS

When controlled for age, sex, and premorbid activity level, patients with SRA had a higher incidence of complete absence of any limp, lower incidence of thigh pain, lower incidence of perception of limb length discrepancy, greater ability to walk continuously for more than 60 minutes, higher percentage of patients who ran after surgery, greater distance run, and higher percentage of patients who returned to their most favored recreational activity.

CONCLUSIONS

When interviewed by an independent third party, patients with SRA reported higher levels of function with fewer symptoms and less perception of limb length discrepancy compared to a similar cohort of young, active patients with THA.

A prospective study of a ceramic-on-metal bearing in total hip arthroplasty

We prospectively assessed the efficacy of a ceramic-on-metal (CoM) hip bearing with uncemented acetabular and femoral components in which cobalt­–chrome acetabular liners and alumina ceramic heads were used.

The cohort comprised 94 total hip replacements (THRs) in 83 patients (38 women and 45 men) with a mean age of 58 years (42 to 70). Minimum follow-up was two years. All patients had pre- and post-operative assessment using the Western Ontario and McMaster Universities osteoarthritis index (WOMAC), Oxford hip score and Short-Form 12 scores. All showed a statistically significant improvement from three months post-operatively onwards (all p < 0.001).

After two years whole blood metal ion levels were measured and chromosomal analysis was performed. The levels of all metal ions were elevated except vanadium. Levels of chromium, cobalt, molybdenum and titanium were significantly higher in patients who underwent bilateral THR compared with those undergoing unilateral THR (p < 0.001). Chromosomal analysis demonstrated both structural and aneuploidy mutations. There were significantly more breaks and losses than in the normal population (p < 0.001). There was no significant difference in chromosomal aberration between those undergoing unilateral and bilateral procedures (all analyses p ≥ 0.62).

The use of a CoM THR is effective clinically in the short-term, with no concerns, but the significance of high metal ion levels and chromosomal aberrations in the long-term remains unclear.

Cite this article: Bone Joint J 2013;95-B:1040–44.

A comparison of two resurfacing arthroplasty implants: medium-term clinical and radiographic results

The objective of this study was to perform a medium-term analysis comparing the clinical and radiographic outcomes of the CONSERVE® Plus (C+) and Birmingham Hip Resurfacing (BHR) arthroplasty systems. 137 hips were included in each cohort, with a mean follow-up of 60.0 ± 14.2 months and 63.3 ± 3.5 months in the C+ and BHR cohorts respectively. Latest review UCLA and HHS scores showed statistically significant improvements when compared with preoperative scores for both cohorts. UCLA and SF-12 physical component outcome scores were significantly different (p<0.01 and p = 0.04, respectively). Median serum chromium and cobalt levels were significantly increased in the BHR cohort (p = 0.001). Both cohorts demonstrated excellent Kaplan-Meier 5-year survival rates (96.9% in the C+ cohort, and 96.4% in the BHR cohort). Overall both implants appear to perform well in the medium term.

Effect of simplifications of bone and components inclination on the elastohydrodynamic lubrication modeling of metal-on-metal hip resurfacing prosthesis

It is important to study the lubrication mechanism of metal-on-metal hip resurfacing prosthesis in order to understand its overall tribological performance, thereby minimize the wear particles. Previous elastohydrodynamic lubrication studies of metal-on-metal hip resurfacing prosthesis neglected the effects of the orientations of the cup and head. Simplified pelvic and femoral bone models were also adopted for the previous studies. These simplifications may lead to unrealistic predictions. For the first time, an elastohydrodynamic lubrication model was developed and solved for a full metal-on-metal hip resurfacing arthroplasty. The effects of the orientations of components and the realistic bones on the lubrication performance of metal-on-metal hip resurfacing prosthesis were investigated by comparing the full model with simplified models. It was found that the orientation of the head played a very important role in the prediction of pressure distributions and film profiles of the metal-on-metal hip resurfacing prosthesis. The inclination of the hemispherical cup up to 45° had no appreciable effect on the lubrication performance of the metal-on-metal hip resurfacing prosthesis. Moreover, the combined effect of material properties and structures of bones was negligible. Future studies should focus on higher inclination angles, smaller coverage angle and microseparation related to the occurrences of edge loading.

Contact patch to rim distance predicts metal ion levels in hip resurfacing

BACKGROUND

Component design, size, acetabular orientation, patient gender, and activity level have been suggested as factors leading to elevated metal ion concentrations after-on-metal hip resurfacing arthroplasty (MMHRA). The calculation of the contact patch to rim (CPR) distance integrates component size, design, and acetabular orientation and may be a good predictor of elevated metal ion levels.

QUESTIONS/PURPOSES

We evaluated the effects and the predictive value of the CPR distance on serum cobalt (CoS) and chromium (CrS) ion levels.

METHODS

We retrospectively studied 182 patients with Conserve Plus MMHRAs at a minimum of 12 months after surgery (median, 57 months; range, 12-165 months). CoS and CrS levels were analyzed using inductively-coupled plasma mass spectrometry. Multiple logistic regression was performed to determine which if any of the factors related to serum ion levels.

RESULTS

Patients with CPR distances of 10 mm or less had a 37-fold increased risk of having elevated CoS of 7 μg/L or higher. Similarly, these patients had an 11-fold increased risk of having elevated CrS of 7 μg/L or higher. Sex and University of California Los Angeles activity scores did not influence the postoperative CoS and CrS levels. The negative predictive value for CPR distance less than 10 mm was 99.3% for CoS greater than 7 μg/L and 98.0% for CrS greater than 7 μg/L.

CONCLUSIONS

Our observations suggest the CPR distance would be a useful indicator to determine which patients are at risk for elevated ion levels. Patients with CPR distances greater than 10 mm need not be monitored unless they become symptomatic.

Which factors determine the wear rate of large-diameter metal-on-metal hip replacements? Multivariate analysis of two hundred and seventy-six components

BACKGROUND

Determining the relationship between clinical factors and engineering analysis of retrieved hip implants can help our understanding of the mechanism of device failure. This is particularly important for metal-on-metal hip arthroplasties because the most common cause of failure is unexplained. We sought to understand the variation in wear rates in a large series of retrieved metal-on-metal hip arthroplasty components.

METHODS

We prospectively recorded preoperative, intraoperative, and postoperative data to study the effect on both head and cup wear rates of the following variables: patient sex, cause of failure, manufacturer type, resurfacing or modular design, blood cobalt and chromium levels, edge-loading, femoral head size, and cup inclination angle. We analyzed 276 components (138 femoral head and acetabular cup couples) retrieved from failed metal-on-metal hip replacements.

RESULTS

We found a high rate of edge-loading (64%), but only forty-three (31%) of 138 hips had a cup inclination angle of >55°. Multivariate analysis showed that the most important factor responsible for the variation in wear rate was the presence or absence of edge-loading, even when adjusted for cup inclination angle. Strong positive correlations were found between acetabular cup and femoral head wear rates and between wear rates and both blood cobalt and chromium ion levels.

CONCLUSIONS

Multivariate analysis of nine factors found that edge-loading was the most important predictor of wear rate and occurred in two-thirds of failed metal-on-metal hip replacements. The majority did not have excessive cup inclination angles: 68% had an inclination angle of ≤55°. This finding, together with the relatively low median wear rate of the components in our study, suggests that cup position and/or wear rate may not be the only outcome related to failure of metal-on-metal hip replacements.

Socket position determines hip resurfacing 10-year survivorship

BACKGROUND

Modern metal-on-metal hip resurfacing arthroplasty designs have been used for over a decade. Risk factors for short-term failure include small component size, large femoral head defects, low body mass index, older age, high level of sporting activity, and component design, and it is established there is a surgeon learning curve. Owing to failures with early surgical techniques, we developed a second-generation technique to address those failures. However, it is unclear whether the techniques affected the long-term risk factors.

QUESTIONS/PURPOSES

We (1) determined survivorship for hips implanted with the second-generation cementing technique; (2) identified the risk factors for failure in these patients; and (3) determined the effect of the dominant risk factors on the observed modes of failure.

METHODS

We retrospectively reviewed the first 200 hips (178 patients) implanted using our second-generation surgical technique, which consisted of improvements in cleaning and drying the femoral head before and during cement application. There were 129 men and 49 women. Component orientation and contact patch to rim distance were measured. We recorded the following modes of failure: femoral neck fracture, femoral component loosening, acetabular component loosening, wear, dislocation, and sepsis. The minimum followup was 25 months (mean, 106.5 months; range, 25-138 months).

RESULTS

Twelve hips were revised. Kaplan-Meier survivorship was 98.0% at 5 years and 94.3% at 10 years. The only variable associated with revision was acetabular component position. Contact patch to rim distance was lower in hips that dislocated, were revised for wear, or were revised for acetabular loosening. The dominant modes of failure were related to component wear or acetabular component loosening.

CONCLUSIONS

Acetabular component orientation, a factor within the surgeon's control, determines the long-term success of our current hip resurfacing techniques. Current techniques have changed the modes of failure from aseptic femoral failure to wear or loosening of the acetabular component.

LEVEL OF EVIDENCE

Level III, prognostic study. See Guidelines for Authors for a complete description of levels of evidence.

Metal-on-metal bearings, inflammatory pseudotumours and their neurological manifestations

Metal-on-metal bearings have become more popular for hip arthroplasty in younger patients in the last 15 years. We present a review of the neurological consequences relating to such bearing surfaces illustrated by an appropriate case report. The mechanisms of increased metal ion production and pseudotumour formation are discussed. If unexplained neurology, hip/groin pain or a localised mass around the hip are present with a metal bearing hip then urgent referral to a specialist orthopaedic surgeon is warranted for consideration of exchange arthroplasty.

Theoretical relationships between component design, patient bone geometry and range-of-motion post hip resurfacing

Clinical studies indicate that range of motion until prosthetic impingement is important in understanding unexplained failures of hip resurfacings, yet the underlying biomechanical principles have received little attention. This study investigates the mathematical relationships between component design, position, patient bone geometry and range of motion in hip resurfaced prostheses. Variations in range of motion and impingement-free safe-zones for cup position were calculated using an established method of vector analysis that facilitated parametric analysis in a time efficient manner. The alpha angle, defined as the angle between the centreline of the femoral neck and the waist of the femoral head/neck junction, was used to represent the natural femoral neck. Range of motion and impingement-free safe-zones were inversely proportional to the alpha angle and cup inclusion angle. The size of the safe-zone was most sensitive to the alpha angle with a 6 degrees reduction, decreasing the range of cup positions without impingement by 80-100%. Lowering the upper limit of cup inclination from 55 degrees to 45 degrees reduced the range of cup positions that allow impingement-free motion by 47-94%. No common safe-zone was observed for the range of component sizes and positions investigated. This offers an explanation to why clinic studies have failed to associate outcome with standardised positioning criteria.

Microseparation, fluid pressure and flow in failures of metal-on-metal hip resurfacing arthroplasties

OBJECTIVES

Metal-on-metal (MoM) hip resurfacing was introduced into clinical practice because it was perceived to be a better alternative to conventional total hip replacement for young and active patients. However, an increasing number of reports of complications have arisen focusing on design and orientation of the components, the generation of metallic wear particles and serum levels of metallic ions. The procedure introduced a combination of two elements: large-dimension components and hard abrasive particles of metal wear. The objective of our study was to investigate the theory that microseparation of the articular surfaces draws in a high volume of bursal fluid and its contents into the articulation, and at relocation under load would generate high pressures of fluid ejection, resulting in an abrasive water jet.

METHODS

This theoretical concept using MoM resurfacing components (head diameter 55 mm) was modelled mathematically and confirmed experimentally using a material-testing machine that pushed the head into the cup at a rate of 1000 mm/min until fully engaged.

RESULTS

The mathematical model showed the pattern but not the force of fluid ejection, the highest pressures were expected when the separation of the components was only a fraction of one millimetre. The experimental work confirmed the results; with the mean peak ejection pressure of 43 763 N/m(2) equivalent to 306 mmHg or 5 psi.

CONCLUSIONS

The mechanical effect of the high-pressure abrasive water jet is the likely cause of the spectrum of complications reported with metal-on-metal resurfacing. Investigating serum levels of metallic elements may not be the best method for assessing the local mechanical effects of the abrasive water jet.

Cushion bearings versus large diameter head metal-on-metal bearings in total hip arthroplasty: a short-term metal ion study

INTRODUCTION

Metal-on-metal total hip arthroplasty (MOM THA) has the advantage of replicating the femoral head size, but the postoperative elevation of serum metal ion levels is a cause for concern. Metal-on-polycarbonate-urethane is a new cushion bearing featuring a large diameter metal head coupled with a polycarbonate-urethane liner.

AIM

The aim of this study was to assess and compare serum cobalt (Co) and chromium (Cr) levels in a group of 15 patients treated with a cushion bearing THA system (Group A) and a group of 15 patients treated with a MOM THA system (Group B) at short-term. At a mean follow-up of 27.3 months (18-35 months), in Group A the median Cr and Co serum levels were significantly lower than in Group B, measuring 0.24 μg/L (0.1-2.1 μg/L) and 0.6 μg/L (0.29-2.3 μg/L) compared to 1.3 μg/L (0.1-9 μg/L, p < 0.001) and 2.9 μg/L (0.85-13.8 μg/L, p < 0.001) respectively.

RESULTS

All patients demonstrated an excellent clinical result, as shown by the Harris and Oxford hip scores. The cushion bearing THA studied in this paper showed clinical outcomes similar to the MOM THA bearing, with the advantage of no significant metal ion elevation in the serum.

CONCLUSION

These findings warrant the continued clinical study of compliant bearing options.

Serum metal ion concentrations after unilateral vs bilateral large-head metal-on-metal primary total hip arthroplasty

It is unknown if the presence of bilateral well-functioning large-head metal-on-metal (MOM) total hip arthroplasties (THAs) leads to higher serum metal ion concentrations than unilateral MOM THA. Elevated levels (chromium, 17 μg/L; cobalt, 19 μg/L) have been associated with poorly functioning MOM THA with metallosis. Fourteen patients having undergone bilateral and 25 patients having undergone unilateral large-head primary MOM THA were compared. Harris Hip Scores, University of California Los Angeles activity scores, radiographs, serum creatinine, and serum cobalt and chromium levels were obtained. Only cobalt ion levels were significantly higher in the bilateral group than in the unilateral group (1.8 μg/L vs 1.0 μg/L, P = .029). Comparatively, this magnitude is clinically rather low because ion levels did not approach those associated with metallosis in either group. We conclude that although patients with well-functioning bilateral MOM THA may have slightly higher cobalt levels, neither cobalt nor chromium levels approach those seen in poorly functioning MOM THA with metallosis.

Sensitivity and specificity of blood cobalt and chromium metal ions for predicting failure of metal-on-metal hip replacement

Blood metal ions have been widely used to investigate metal-on-metal hip replacements, but their ability to discriminate between well-functioning and failed hips is not known. The Medicines and Healthcare products Regulatory Agency (MHRA) has suggested a cut-off level of 7 parts per billion (ppb). We performed a pair-matched, case-control study to investigate the sensitivity and specificity of blood metal ion levels for diagnosing failure in 176 patients with a unilateral metal-on-metal hip replacement. We recruited 88 cases with a pre-revision, unexplained failed hip and an equal number of matching controls with a well-functioning hip. We investigated the 7 ppb cut-off level for the maximum of cobalt or chromium and determined optimal mathematical cut-off levels from receiver-operating characteristic curves. The 7 ppb cut-off level for the maximum of cobalt or chromium had a specificity of 89% and sensitivity 52% for detecting a pre-operative unexplained failed metal on metal hip replacement. The optimal cut-off level for the maximum of cobalt or chromium was 4.97 ppb and had sensitivity 63% and specificity 86%. Blood metal ions had good discriminant ability to separate failed from well-functioning hip replacements. The MHRA cut-off level of 7 ppb provides a specific test but has poor sensitivity.