Tissue-engineered oral mucosa: a review of the scientific literature

A Tissue Engineered 3D Model of Cancer Cell Invasion for Human Head and Neck Squamous-Cell Carcinoma

Head and neck squamous-cell carcinoma (HNSCC) is associated with aggressive local invasiveness, being a main reason for its poor prognosis. The exact mechanisms underlying the strong invasive abilities of HNSCC remain to be elucidated. Therefore, there is a need for in vitro models to study the interplay between cancer cells and normal adjacent tissue at the invasive tumor front. To generate oral mucosa tissue models (OMM), primary keratinocytes and fibroblasts from human oral mucosa were isolated and seeded onto a biological scaffold derived from porcine small intestinal submucosa with preserved mucosa. Thereafter, we tested different methods (single tumor cells, tumor cell spots, spheroids) to integrate the human cancer cell line FaDu to generate an invasive three-dimensional model of HNSCC. All models were subjected to morphological analysis by histology and immunohistochemistry. We successfully built OMM tissue models with high in vivo-in vitro correlation. The integration of FaDu cell spots and spheroids into the OMM failed. However, with the integration of single FaDu cells into the OMM, invasive tumor cell clusters developed. Between segments of regular epithelial differentiation of the OMM, these clusters showed a basal membrane penetration and lamina propria infiltration. Primary human fibroblasts and keratinocytes seeded onto a porcine carrier structure are suitable to build an OMM. The HNSCC model with integrated FaDu cells could enable subsequent investigations into cancer cell invasiveness.

Biofabrication Strategies for Oral Soft Tissue Regeneration

Gingival recession, a prevalent condition affecting the gum tissues, is characterized by the exposure of tooth root surfaces due to the displacement of the gingival margin. This review explores conventional treatments, highlighting their limitations and the quest for innovative alternatives. Importantly, it emphasizes the critical considerations in gingival tissue engineering leveraging on cells, biomaterials, and signaling factors. Successful tissue-engineered gingival constructs hinge on strategic choices such as cell sources, scaffold design, mechanical properties, and growth factor delivery. Unveiling advancements in recent biofabrication technologies like 3D bioprinting, electrospinning, and microfluidic organ-on-chip systems, this review elucidates their precise control over cell arrangement, biomaterials, and signaling cues. These technologies empower the recapitulation of microphysiological features, enabling the development of gingival constructs that closely emulate the anatomical, physiological, and functional characteristics of native gingival tissues. The review explores diverse engineering strategies aiming at the biofabrication of realistic tissue-engineered gingival grafts. Further, the parallels between the skin and gingival tissues are highlighted, exploring the potential transfer of biofabrication approaches from skin tissue regeneration to gingival tissue engineering. To conclude, the exploration of innovative biofabrication technologies for gingival tissues and inspiration drawn from skin tissue engineering look forward to a transformative era in regenerative dentistry with improved clinical outcomes.

Electrospun methacrylated natural/synthetic composite membranes for gingival tissue engineering

New functional materials for engineering gingival tissue are still in the early stages of development. Materials for such applications must maintain volume and have advantageous mechanical and biological characteristics for tissue regeneration, to be an alternative to autografts, which are the current benchmark of care. In this work, methacrylated gelatin (GelMa) was photocrosslinked with synthetic immunomodulatory methacrylated divinyl urethanes and defined monomers to generate composite scaffolds. Using a factorial design, with the synthetic monomers of a degradable polar/hydrophobic/ionic polyurethane (D-PHI) and GelMa, composite materials were electrospun with polycarbonate urethane (PCNU) and light-cured in-flight. The materials had significantly different relative hydrophilicities, with unique biodegradation profiles associated with specific formulations, thereby providing good guidance to achieving desired mechanical characteristics and scaffold resorption for gingival tissue regeneration. In accelerated esterase/collagenase degradation models, the new materials exhibited an initial rapid weight loss followed by a more gradual rate of degradation. The degradation profile allowed for the early infiltration of human adipose-derived stromal/stem cells, while still enabling the graft's structural integrity to be maintained. In conclusion, the materials provide a promising candidate platform for the regeneration of oral soft tissues, addressing the requirement of viable tissue infiltration while maintaining volume and mechanical integrity. STATEMENT OF SIGNIFICANCE: There is a need for the development of more functional and efficacious materials for the treatment of gingival recession. To address significant limitations in current material formulations, we sought to investigate the development of methacrylated gelatin (GelMa) and oligo-urethane/methacrylate monomer composite materials. A factorial design was used to electrospin four new formulations containing four to five monomers. Synthetic immunomodulatory monomers were crosslinked with GelMa and electrospun with a polycarbonate urethane resulting in unique mechanical properties, and resorption rates which align with the original design criteria for gingival tissue engineering. The materials may have applications in tissue engineering and can be readily manufactured. The findings of this work may help better direct the efforts of tissue engineering and material manufacturing.

A Synthetic Model of the Mucosa for Oral Penetration Studies

The main objective of this study is the evaluation of the use of a synthetic membrane, Nuclepore, as a model for permeation studies through sublingual mucosa. The permeability of two types of membranes, porcine sublingual oral mucosa and a synthetic Nuclepore membrane, to water was compared. Moreover, the water permeability of membranes modified with waterproofing formulations was measured to study their ability to protect against the penetration of viruses, toxins, etc. A relatively high correlation (R2 0.88) was obtained between the transmucosal water loss (TMWL) values of the artificial membrane and the mucosa. These results support the possible use of this synthetic membrane in the screening of the water permeability of formulations. In addition, studies of the permeation of different actives, drugs, and biocides through the two membranes were carried out, and these results were compared with their skin permeation data. The synthetic membrane does not seem to discern between compounds in terms of permeability. However, the permeation of caffeine through intact or modified membranes incorporating waterproofing formulations presents similar permeation profiles through the synthetic membrane and mucosa. The results from these assays should lend support to the use of this synthetic membrane when screening formulations to be applied in oral penetration studies.

The Era of Biomaterials: Smart Implants?

Conditions, accidents, and aging processes have brought with them the need to develop implants with higher technology that allow not only the replacement of missing tissue but also the formation of tissue and the recovery of its function. The development of implants is due to advances in different areas such as molecular-biochemistry (which allows the understanding of the molecular/cellular processes during tissue repair), materials engineering, tissue regeneration (which has contributed advances in the knowledge of the properties of the materials used for their manufacture), and the so-called intelligent biomaterials (which promote tissue regeneration through inductive effects of cell signaling in response to stimuli from the microenvironment to generate adhesion, migration, and cell differentiation processes). The implants currently used are combinations of biopolymers with properties that allow the formation of scaffolds with the capacity to mimic the characteristics of the tissue to be repaired. This review describes the advances of intelligent biomaterials in implants applied in different dental and orthopedic problems; by means of these advances, it is expected to overcome limitations such as additional surgeries, rejections and infections in implants, implant duration, pain mitigation, and mainly, tissue regeneration.

Three-Dimensional Oral Mucosal Equivalents as Models for Transmucosal Drug Permeation Studies

Oral transmucosal administration, where drugs are absorbed directly through the non-keratinized, lining mucosa of the mouth, represents a solution to drug delivery with several advantages. Oral mucosal equivalents (OME) developed as 3D in vitro models are of great interest since they express the correct cell differentiation and tissue architecture, simulating the in vivo conditions better than monolayer cultures or animal tissues. The aim of this work was to develop OME to be used as a membrane for drug permeation studies. We developed both full-thickness (i.e., connective plus epithelial tissue) and split-thickness (i.e., only epithelial tissue) OME using non-tumor-derived human keratinocytes OKF6 TERT-2 obtained from the floor of the mouth. All the OME developed here presented similar transepithelial electrical resistance (TEER) values, comparable to the commercial EpiOral™. Using eletriptan hydrobromide as a model drug, we found that the full-thickness OME had similar drug flux to EpiOral™ (28.8 vs. 29.6 µg/cm²/h), suggesting that the model had the same permeation barrier properties. Furthermore, full-thickness OME showed an increase in ceramide content together with a decrease in phospholipids in comparison to the monolayer culture, indicating that lipid differentiation occurred due to the tissue-engineering protocols. The split-thickness mucosal model resulted in 4-5 cell layers with basal cells still undergoing mitosis. The optimum period at the air-liquid interface for this model was twenty-one days; after longer times, signs of apoptosis appeared. Following the 3R principles, we found that the addition of Ca²⁺, retinoic acid, linoleic acid, epidermal growth factor and bovine pituitary extract was important but not sufficient to fully replace the fetal bovine serum. Finally, the OME models presented here offer a longer shelf-life than the pre-existing models, which paves the way for the further investigation of broader pharmaceutical applications (i.e., long-term drug exposure, effect on the keratinocytes' differentiation and inflammatory conditions, etc.).

Local Concentrations of TGF-β1 and IGF-1 Appear Determinant in Regulating Bone Regeneration in Human Postextraction Tooth Sockets

Healing after tooth extraction involves a series of reparative processes affecting both alveolar bone and soft tissues. The aim of the present study was to investigate whether activation of molecular signals during the healing process confers a regenerative advantage to the extraction socket soft tissue (ESsT) at 8 weeks of healing. Compared to subepithelial connective tissue graft (CTG), qRT-PCR analyses revealed a dramatic enrichment of the ESsT in osteogenic differentiation markers. However, ESsT and CTG shared characteristics of nonspecialized soft connective tissue by expressing comparable levels of genes encoding abundant extracellular matrix (ECM) proteins. Genes encoding the transforming growth factor-β1 (TGF-β1) and its receptors were strongly enriched in the CTG, whereas the transcript for the insulin-like growth factor-1 (IGF-1) showed significantly high and comparable expression in both tissues. Mechanical stimulation, by the means of cyclic strain or matrix stiffness applied to primary ESsT cells (ESsT-C) and CTG fibroblasts (CTG-F) extracted from the tissue samples, revealed that stress-induced TGF-β1 not exceeding 2.3 ng/mL, as measured by ELISA, in combination with IGF-1 up to 2.5 ng/mL was able to induce the osteogenic potential of ESsT-Cs. However, stiff matrices (50 kPa), upregulating the TGF-β1 expression up to 6.6 ng/mL, caused downregulation of osteogenic gene expression in the ESsT-Cs. In CTG-Fs, endogenous or stress-induced TGF-β1 ≥ 4.6 ng/mL was likely responsible for the complete lack of osteogenesis. Treatment of ESsT-Cs with TGF-β1 and IGF-1 proved that, at specific concentrations, the two growth factors exhibited either an inductive-synergistic or a suppressive activity, thus determining the osteogenic and mineralization potential of ESsT-Cs. Taken together, our data strongly warrant the clinical exploration of ESsT as a graft in augmentative procedures during dental implant placement surgeries.

Clinical and patient-reported outcomes of tissue engineering strategies for periodontal and peri-implant reconstruction

Scientific advancements in biomaterials, cellular therapies, and growth factors have brought new therapeutic options for periodontal and peri-implant reconstructive procedures. These tissue engineering strategies involve the enrichment of scaffolds with living cells or signaling molecules and aim at mimicking the cascades of wound healing events and the clinical outcomes of conventional autogenous grafts, without the need for donor tissue. Several tissue engineering strategies have been explored over the years for a variety of clinical scenarios, including periodontal regeneration, treatment of gingival recessions/mucogingival conditions, alveolar ridge preservation, bone augmentation procedures, sinus floor elevation, and peri-implant bone regeneration therapies. The goal of this article was to review the tissue engineering strategies that have been performed for periodontal and peri-implant reconstruction and implant site development, and to evaluate their safety, invasiveness, efficacy, and patient-reported outcomes. A detailed systematic search was conducted to identify eligible randomized controlled trials reporting the outcomes of tissue engineering strategies utilized for the aforementioned indications. A total of 128 trials were ultimately included in this review for a detailed qualitative analysis. Commonly performed tissue engineering strategies involved scaffolds enriched with mesenchymal or somatic cells (cell-based tissue engineering strategies), or more often scaffolds loaded with signaling molecules/growth factors (signaling molecule-based tissue engineering strategies). These approaches were found to be safe when utilized for periodontal and peri-implant reconstruction therapies and implant site development. Tissue engineering strategies demonstrated either similar or superior clinical outcomes than conventional approaches for the treatment of infrabony and furcation defects, alveolar ridge preservation, and sinus floor augmentation. Tissue engineering strategies can promote higher root coverage, keratinized tissue width, and gingival thickness gain than scaffolds alone can, and they can often obtain similar mean root coverage compared with autogenous grafts. There is some evidence suggesting that tissue engineering strategies can have a positive effect on patient morbidity, their preference, esthetics, and quality of life when utilized for the treatment of mucogingival deformities. Similarly, tissue engineering strategies can reduce the invasiveness and complications of autogenous graft-based staged bone augmentation. More studies incorporating patient-reported outcomes are needed to understand the cost-benefits of tissue engineering strategies compared with traditional treatments.

Augmented Glutathione Absorption from Oral Mucosa and its Effect on Skin Pigmentation: A Clinical Review

Treatment of dark skin with glutathione has become popular due to its depigmenting properties and low toxicity. Glutathione has been used topically, orally and parenterally in the management of dark skin. There are no clear published guidelines for management of skin pigmentation despite some clinical trials of shorter duration and small sample sizes. We examined published scientific and patient data to generate guidance for the clinician for managing hyperpigmentation using glutathione by orobuccal route. Various aspects of glutathione bioavailability were examined when administered by oral routes. Absorption of glutathione from the gastrointestinal tract is poor. Some trials have favored administering high oral doses to achieve therapeutic effect. General consensus remains against treatment of hyperpigmentation with glutathione by the oral route. Clinical and experimental evidence supporting significant glutathione absorption from orobuccal mucosa was examined. The latter is superior to the oral route since glutathione passes directly into systemic circulation resulting in a much higher rate of absorption compared to that achieved by oral intake. High blood levels thus achieved have therapeutic value. Treatment of hyperpigmentation with glutathione by the orobuccal route using hydroxypropyl cellulose (HPC) film was reviewed to formulate clinical guidance from published data. A future randomized, double-blind, placebo-controlled trial should study treatment of hyperpigmentation with glutathione using oral dispersible HPC film, with longer-term follow-up and larger sample size. This paper will hopefully offer broad guidance for the clinician on use of glutathione for hyperpigmentation management, until outcomes of larger, longer duration trials become available.

Oral mucosa equivalents, prevascularization approaches, and potential applications

BACKGROUND

Oral mucosa equivalents (OMEs) have been used as in vitro models (eg, for studies of human oral mucosa biology and pathology, toxicological and pharmacological tests of oral care products), and clinically to treat oral defects. However, the human oral mucosa is a highly vascularized tissue and implantation of large OMEs can fail due to a lack of vascularization. To develop equivalents that better resemble the human oral mucosa and increase the success of implantation to repair large-sized defects, efforts have been made to prevascularize these constructs.

PURPOSE

The aim of this narrative review is to provide an overview of the human oral mucosa structure, common approaches for its reconstruction, and the development of OMEs, their prevascularization, and in vitro and clinical potential applications.

STUDY SELECTION

Articles on non-prevascularized and prevascularized OMEs were included, since the development and applications of non-prevascularized OMEs are a foundation for the design, fabrication, and optimization of prevascularized OMEs.

CONCLUSIONS

Several studies have reported the development and in vitro and clinical applications of OMEs and only a few were found on prevascularized OMEs using different approaches of fabrication and incorporation of endothelial cells, indicating a lack of standardized protocols to obtain these equivalents. However, these studies have shown the feasibility of prevascularizing OMEs and their implantation in animal models resulted in enhanced integration and healing. Vascularization in tissue equivalents is still a challenge, and optimization of cell culture conditions, biomaterials, and fabrication techniques along with clinical studies is required.

The Structure and Function of Next-Generation Gingival Graft Substitutes-A Perspective on Multilayer Electrospun Constructs with Consideration of Vascularization

There is a shortage of suitable tissue-engineered solutions for gingival recession, a soft tissue defect of the oral cavity. Autologous tissue grafts lead to an increase in morbidity due to complications at the donor site. Although material substitutes are available on the market, their development is early, and work to produce more functional material substitutes is underway. The latter materials along with newly conceived tissue-engineered substitutes must maintain volumetric form over time and have advantageous mechanical and biological characteristics facilitating the regeneration of functional gingival tissue. This review conveys a comprehensive and timely perspective to provide insight towards future work in the field, by linking the structure (specifically multilayered systems) and function of electrospun material-based approaches for gingival tissue engineering and regeneration. Electrospun material composites are reviewed alongside existing commercial material substitutes’, looking at current advantages and disadvantages. The importance of implementing physiologically relevant degradation profiles and mechanical properties into the design of material substitutes is presented and discussed. Further, given that the broader tissue engineering field has moved towards the use of pre-seeded scaffolds, a review of promising cell options, for generating tissue-engineered autologous gingival grafts from electrospun scaffolds is presented and their potential utility and limitations are discussed.

Antifungal Activity and Biocompatibility of α-AgVO3, α-Ag2WO4, and β-Ag2MoO4 Using a Three-Dimensional Coculture Model of the Oral Mucosa

Fungal infections have become a major concern in the medical community, especially those caused by Candida spp. Within this species, Candida albicans stands out for being an opportunistic commensal fungus that can cause superficial and invasive infections. Current antifungal therapy involves the local and/or systemic use of drugs such as azoles, polyenes, and echinocandins. These antifungals are based on highly specific target sites, and the development of resistance may occur with changes in the enzymatic pathways that serve as the drug targets. Thus, the development of new antifungal drugs is highly recommended to prevent drug resistance. The present investigation evaluated the antifungal activity of silver-containing microcrystals such as silver vanadate (α-AgVO₃), silver tungstate (α-Ag₂WO₄), and silver molybdate (β-Ag₂MoO₄). In addition to having antimicrobial activity, such compounds should not cause damage to underlying tissues. Thus, to better assess the biocompatibility of new compounds, a new three-dimensional (3D) coculture model involving three cell lines was developed. The validation of the model was based on fluorescent markers and confocal laser microscopy. The biocompatibility of silver-containing microcrystals was evaluated by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. 3D coculture was infected with C. albicans biofilm and challenged with α-AgVO₃, α-Ag₂WO₄, and β-Ag₂MoO₄. The action of microcrystals on C. albicans biofilm was evaluated by colony-forming units (CFU/ml) and LIVE/DEAD staining. In addition, production of proinflammatory cytokines interleukin 6 (IL-6), IL-8, IL-1β, and tumor necrosis factor α (TNF-α) was measured by cytometric bead array kit using flow cytometry. The 3D coculture model described here proved to be adequate to assess both the biocompatibility of the new materials and the infectious processes. Regarding the biocompatibility of the microcrystals, only α-AgVO₃ (15.62 µg/ml) showed a decrease in cell viability. The antibiofilm activity of α-Ag₂WO₄ was similar to that of the standard drug (fluconazole). Although α-Ag₂WO₄ was able to induce the production of IL-6, IL-8, and IL-1β, no differences in cytokine production were observed between noninfected and infected models treated with this microcrystal. β-Ag₂MoO₄ inhibits the production of TNF-α in the infected model; however, it showed no antibiofilm activity. Based on the biocompatibility and antifungal findings, α-Ag₂WO₄ is a promising material for treating C. albicans infection.

Oral Mucosa as a Potential Site for Diagnosis and Treatment of Allergic and Autoimmune Diseases

Most prevalent food allergies during early childhood are caused by foods with a high allergenic protein content, such as milk, egg, nuts, or fish. In older subjects, some respiratory allergies progressively lead to food-induced allergic reactions, which can be severe, such as urticaria or asthma. Oral mucosa remodeling has been recently proven to be a feature of severe allergic phenotypes and autoimmune diseases. This remodeling process includes epithelial barrier disruption and the release of inflammatory signals. Although little is known about the immune processes taking place in the oral mucosa, there are a few reports describing the oral mucosa-associated immune system. In this review, we will provide an overview of the recent knowledge about the role of the oral mucosa in food-induced allergic reactions, as well as in severe respiratory allergies or food-induced autoimmune diseases, such as celiac disease.

An In-Vitro Analysis of Peri-Implant Mucosal Seal Following Photofunctionalization of Zirconia Abutment Materials

The presence of epithelial and connective tissue attachment at the peri-implant-soft tissue region has been demonstrated to provide a biological barrier of the alveolar bone from the oral environment. This barrier can be improved via surface modification of implant abutment materials. The effect of photofunctionalization on creating a bioactive surface for the enhancement of the epithelial and connective tissue attachment of zirconia implant abutment's peri-implant mucosal interface using organotypic model has not been investigated. Therefore, this study aimed to evaluate the soft tissue seal around peri-implant mucosa and to understand the effect of photofunctionalization on the abutment materials. Three types of abutment materials were used in this study; yttria-stabilized zirconia (YSZ), alumina-toughened zirconia, and grade 2 commercially pure titanium (CPTi) which were divided into nontreated (N-Tx) and photofunctionalized group (UV-Tx). The three-dimensional peri-implant mucosal model was constructed using primary human gingival keratinocytes and fibroblasts co-cultured on the acellular dermal membrane. The biological seal was determined through the concentration of tritiated water permeating the material-soft tissue interface. The biological seal formed by the soft tissue in the N-Tx group was significantly reduced compared to the UV-treated group (p < 0.001), with YSZ exhibiting the lowest permeability among all materials. Photofunctionalization of implant abutment materials improved the biological seal of the surrounding soft tissue peri-implant interface.

An Oral-mucosa-on-a-chip sensitively evaluates cell responses to dental monomers

Knowledge of human gingival cell responses to dental monomers is critical for the development of new dental materials. Testing standards have been developed to provide guidelines to evaluate biological functionality of dental materials and devices. However, one shortcoming of the traditional testing platforms is that they do not recapitulate the multi-layered configuration of gingiva, and thus cannot evaluate the layer-specific cellular responses. An oral mucosa-chip with two cell layers was previously developed as an alternative platform to assess the oral mucosa responses to dental biomaterials. The mucosa-chip consists of an apical keratinocyte layer attached to a fibroblast-embedded collagen hydrogel through interconnecting pores in a three-microchannel network. Here, cell responses in the mucosa-chip were evaluated against 2-hydroxyethyl methacrylate (HEMA), a common monomer used in restorative and aesthetic dentistry. The response of mucosal cell viability was evaluated by exposing the chip to HEMA of concentrations ranging from 1.56 to 25 mM and compared to cells in conventional well-plate monoculture. The co-cultured cells were then stained and imaged with epifluorescence and confocal microscopy to determine the layer-specific responses to the treatment. Mucosa-chips were demonstrated to be more sensitive to assess HEMA-altered cell viability than well-plate cultures, especially at lower doses (1.56 and 6.25 mM). The findings suggest that the mucosa-chip is a promising alternative to traditional platforms or assays to test a variety of biomaterials by offering a multi-layered tissue geometry, accessible layer-specific information, and higher sensitivity in detecting cellular responses.

The Emerging Potential of Extracellular Vesicles in Cell-Free Tissue Engineering and Regenerative Medicine

Extracellular vesicles (Evs) are membrane-enclosed vesicles secreted by all cell types that mediate cell-cell communication via their protein, lipid, carbohydrate, and nucleic acid (RNA, DNA) cargo. EVs are involved in a multitude of physiological processes, including development, cell differentiation, and angiogenesis, and have been implicated in tissue repair. Thus, they have been suggested to offer opportunities for the development of novel cell-free tissue engineering (TE) approaches. In this review, we provide an overview of current understanding and emerging applications of EVs in TE and address opportunities and challenges for clinical translation. In addition, we discuss systemic and local routes of delivery of EVs and the advantages and disadvantages of different biomaterials in providing a substrate for the sustained release of EVs in vivo. Impact statement Extracellular vesicles (EVs) are nanoscale, membrane-bound vesicles released by most, if not all, cells in the body. They are implicated in a wide range of physiological processes and diseases ranging from cancer to neurodegeneration, and hold huge potential as mediators of tissue regeneration. This has led to an explosion of interest in using EVs in a variety of tissue engineering applications. In this review, we provide an overview of current progress in the field and highlight the opportunities and challenges of harnessing the potential of EVs in regenerative medicine.

Enhanced Wound Healing Potential of Primary Human Oral Fibroblasts and Periodontal Ligament Cells Cultured on Four Different Porcine-Derived Collagen Matrices

Xenogenic collagen-based matrices represent an alternative to subepithelial palatal connective tissue autografts in periodontal and peri-implant soft tissue reconstructions. In the present study, we aimed to investigate the migratory, adhesive, proliferative, and wound-healing potential of primary human oral fibroblasts (hOF) and periodontal ligament cells (hPDL) in response to four commercially available collagen matrices. Non-crosslinked collagen matrix (NCM), crosslinked collagen matrix (CCM), dried acellular dermal matrix (DADM), and hydrated acellular dermal matrix (HADM) were all able to significantly enhance the ability of hPDL and hOF cells to directionally migrate toward the matrices as well as to efficiently repopulate an artificially generated wound gap covered by the matrices. Compared to NCM and DADM, CCM and HADM triggered stronger migratory response. Cells grown on CCM and HADM demonstrated significantly higher proliferative rates compared to cells grown on cell culture plastic, NCM, or DADM. The pro-proliferative effect of the matrices was supported by expression analysis of proliferative markers regulating cell cycle progression. Upregulated expression of genes encoding the adhesive molecules fibronectin, vinculin, CD44 antigen, and the intracellular adhesive molecule-1 was detected in hPDL and hOF cells cultured on each of the four matrices. This may be considered as a prerequisite for good adhesive properties of the four scaffolds ensuring proper cell–matrix and cell–cell interactions. Upregulated expression of genes encoding TGF-β1 and EGF growth factors as well as MMPs in cells grown on each of the four matrices provided support for their pro-proliferative and pro-migratory abilities. The expression of genes encoding the angiogenic factors FGF-2 and VEGF-A was dramatically increased in cells grown on DADM and HADM only, suggesting a good basis for accelerated vascularization of the latter. Altogether, our results support favorable influence of the investigated collagen matrices on the recruitment, attachment, and growth of cell types implicated in oral soft tissue regeneration. Among the four matrices, HADM has consistently exhibited stronger positive effects on the oral cellular behavior. Our data provide solid basis for future investigations on the clinical application of the collagen-based matrices in surgical periodontal therapy.

Fibroblast encapsulation in gelatin methacryloyl (GelMA) versus collagen hydrogel as substrates for oral mucosa tissue engineering

Purpose

Over the past decades, a variety of biomaterials have been investigated in terms of their suitability for oral mucosa tissue engineering. The aim of this study was to compare collagen and GelMA hydrogels as connective tissue scaffolds for fibroblasts and as substrates for seeding and culture of oral epithelial keratinocyte cells.

Methods

Human primary oral fibroblast and keratinocyte cells were isolated from gingival biopsies. The mixture of fibroblasts with GelMA or collagen gel were aliquoted within six-well tissue culture plate inserts and cross-linked using visible light or reconstitution buffer/heat, respectively. The viability of fibroblasts in the hydrogels was investigated after one and three days of cultivation using the PrestoBlue assay. Following the addition and culture of oral keratinocytes onto the connective tissue constructs, the tissue-engineered oral mucosa was assessed histologically.

Results

The tissue viability assay shows that collagen hydrogels encapsulating fibroblasts displayed significantly higher cell viability than cell-laden GelMA constructs after 24 and 72 h (p < 0.05). A stratified and differentiated epithelium has formed on the surface of cell-laden collagen hydrogel but not on the surface of the GelMA-based substrate.

Conclusion

Collagen-based scaffold offers superior biological properties compared to GelMA hydrogel in terms of oral fibroblast growth, as well as epithelial cell adhesion and differentiation. Therefore, collagen-based hydrogels remain the preferred choice for oral mucosa tissue engineering.

3D Printing Approach in Dentistry: The Future for Personalized Oral Soft Tissue Regeneration

Three-dimensional (3D) printing technology allows the production of an individualized 3D object based on a material of choice, a specific computer-aided design and precise manufacturing. Developments in digital technology, smart biomaterials and advanced cell culturing, combined with 3D printing, provide promising grounds for patient-tailored treatments. In dentistry, the "digital workflow" comprising intraoral scanning for data acquisition, object design and 3D printing, is already in use for manufacturing of surgical guides, dental models and reconstructions. 3D printing, however, remains un-investigated for oral mucosa/gingiva. This scoping literature review provides an overview of the 3D printing technology and its applications in regenerative medicine to then describe 3D printing in dentistry for the production of surgical guides, educational models and the biological reconstructions of periodontal tissues from laboratory to a clinical case. The biomaterials suitable for oral soft tissues printing are outlined. The current treatments and their limitations for oral soft tissue regeneration are presented, including "off the shelf" products and the blood concentrate (PRF). Finally, tissue engineered gingival equivalents are described as the basis for future 3D-printed oral soft tissue constructs. The existing knowledge exploring different approaches could be applied to produce patient-tailored 3D-printed oral soft tissue graft with an appropriate inner architecture and outer shape, leading to a functional as well as aesthetically satisfying outcome.

Implant Soft-Tissue Attachment Using 3D Oral Mucosal Models-A Pilot Study

PURPOSE

The aim of this study was to investigate soft-tissue attachment to different metal, ceramic, and polymer implant surfaces using an inflamed, three-dimensional (3D), tissue-engineered, human oral mucosal model, as well as multiple-endpoint qualitative and quantitative biological approaches.

METHODS

Normal human oral fibroblasts, OKF6/TERT-2 keratinocytes and THP-1 monocytes were cultured, and full-thickness, 3D oral mucosal models were engineered inside tissue culture inserts. Sand-blasted and acid-etched (SLA) and machined (M) titanium-zirconium alloy (TiZr; commercially known as Roxolid; Institut Straumann AG, Switzerland), ceramic (ZrO2), and polyether ether ketone (PEEK) rods (Ø 4 mm × 8 mm) were inserted into the center of tissue-engineered oral mucosa following a Ø 4mm punch biopsy. Inflammation was simulated with addition of the lipopolysaccharide (LPS) of Escherichia coli (E. coli) and tumor necrosis factor (TNF)-alpha to the culture medium. Implant soft-tissue attachment was assessed using histology, an implant pull-test with PrestoBlue assay, and scanning electron microscopy (SEM).

RESULTS

Inflamed, full-thickness, 3D human oral mucosal models with inserted implants were successfully engineered and histologically characterized. The implant pull-test with PrestoBlue assay showed higher viability of the tissue that remained attached to the TiZr-SLA surface compared to the other test groups. This difference was statistically significant (p < 0.05). SEM analysis showed evidence of epithelial cell attachment on different implant surfaces.

CONCLUSIONS

The inflamed, 3D, oral mucosal model has the potential to be used as a suitable in vitro test system for visualization and quantification of implant soft-tissue attachment. The results of our study indicate greater soft tissue attachment to TiZr-SLA compared to TiZr-M, ceramic, and PEEK surfaces.

Adsorption and Release of Growth Factors from Four Different Porcine-Derived Collagen Matrices

Xenogeneic acellular collagen matrices represent a safe alternative to autologous soft tissue transplants in periodontology and implant dentistry. Here, we aimed to investigate the adsorption and release of growth factors from four porcine-derived collagen matrices using enzyme-linked immunosorbent assay. Non-crosslinked collagen matrix (NCM), crosslinked collagen matrix (CCM), dried acellular dermal matrix (DADM), and hydrated acellular dermal matrix (HADM) adsorbed each of the following growth factors, TGF-β1, FGF-2, PDGF-BB, GDF-5 and BMP-2, with an efficiency close to 100%. Growth factor release for a 13-day period was in the range of 10-50% of the adsorbed protein, except for the BMP-2 release that was in the range of 5-7%. Generally, protein release occurred in two phases. Phase I was arbitrary defined by the highest release from the matrices, usually within 24 h. Phase II, spanning the period immediately after the peak release until day 13, corresponded to the delayed release of the growth factors from the deeper layers of the matrices. HADM showed significantly (P < 0.001) higher TGF-β1, FGF-2, and PDGF-BB release in phase II, compared to the rest of the matrices. NCM exhibited significantly (P < 0.001) higher FGF-2 release in phase II, compared to CCM and DADM as well as a characteristic second peak in PDGF-BB release towards the middle of the tested period. In contrast to NCM and HADM, CCM and DADM showed a gradual and significantly higher release of GDF-5 in the second phase. Several burst releases of BMP-2 were characteristic for all matrices. The efficient adsorption and sustained protein release in the first 13 days, and the kinetics seen for HADM, with a burst release within hours and high amount of released growth factor within a secondary phase, may be beneficial for the long-term tissue regeneration following reconstructive periodontal surgery.

Novel Coronavirus (COVID-19) and Dentistry-A Comprehensive Review of Literature

The novel coronavirus (COVID-19) pandemic has become a real challenge for healthcare providers around the world and has significantly affected the dental professionals in practices, universities and research institutions. The aim of this article was to review the available literature on the relevant aspects of dentistry in relation to COVID-19 and to discuss potential impacts of COVID-19 outbreak on clinical dentistry, dental education and research. Although the coronavirus pandemic has caused many difficulties for provision of clinical dentistry, there would be an opportunity for the dental educators to modernize their teaching approaches using novel digital concepts in teaching of clinical skills and by enhancement of online communication and learning platforms. This pandemic has also highlighted some of the major gaps in dental research and the need for new relevant knowledge to manage the current crisis and minimize the impact of such outbreaks on dentistry in the future. In conclusion, COVID-19 has had many immediate complications for dentistry of which some may have further long-term impacts on clinical practice, dental education and dental research.

Evaluation of the optical and biomechanical properties of bioengineered human skin generated with fibrin-agarose biomaterials

SIGNIFICANCE

Recent generation of bioengineered human skin allowed the efficient treatment of patients with severe skin defects. However, the optical and biomechanical properties of these models are not known.

AIM

Three models of bioengineered human skin based on fibrin-agarose biomaterials (acellular, dermal skin substitutes, and complete dermoepidermal skin substitutes) were generated and analyzed.

APPROACH

Optical and biomechanical properties of these artificial human skin substitutes were investigated using the inverse adding-doubling method and tensile tests, respectively.

RESULTS

The analysis of the optical properties revealed that the model that most resembled the optical behavior of the native human skin in terms of absorption and scattering properties was the dermoepidermal human skin substitutes after 7 to 14 days in culture. The time-course evaluation of the biomechanical parameters showed that the dermoepidermal substitutes displayed significant higher values than acellular and dermal skin substitutes for all parameters analyzed and did not differ from the control skin for traction deformation, stress, and strain at fracture break.

CONCLUSIONS

We demonstrate the crucial role of the cells from a physical point of view, confirming that a bioengineered dermoepidermal human skin substitute based on fibrin-agarose biomaterials is able to fulfill the minimal requirements for skin transplants for future clinical use at early stages of in vitro development.

Three-Dimensional In Vitro Oral Mucosa Models of Fungal and Bacterial Infections

Oral mucosa is the target tissue for many microorganisms involved in periodontitis and other infectious diseases affecting the oral cavity. Three-dimensional (3D) in vitro and ex vivo oral mucosa equivalents have been used for oral disease modeling and investigation of the mechanisms of oral bacterial and fungal infections. This review was conducted to analyze different studies using 3D oral mucosa models for the evaluation of the interactions of different microorganisms with oral mucosa. In this study, based on our inclusion criteria, 43 articles were selected and analyzed. Different types of 3D oral mucosa models of bacterial and fungal infections were discussed in terms of the biological system used, culture conditions, method of infection, and the biological endpoints assessed in each study. The critical analysis revealed some contradictory reports in this field of research in the literature. Challenges in recovering bacteria from oral mucosa models were further discussed, suggesting possible future directions in microbiomics, including the use of oral mucosa-on-a-chip. The potential use of these 3D tissue models for the evaluation of the effects of antiseptic agents on bacteria and oral mucosa was also addressed. This review concluded that there were many aspects that would require optimization and standardization with regard to using oral mucosal models for infection by microorganisms. Using new technologies-such as microfluidics and bioreactors-could help to reproduce some of the physiologically relevant conditions and further simulate the clinical situation. Impact statement Tissue-engineered or commercial models of the oral mucosa are very useful for the study of diseases that involve the interaction of microorganisms and oral epithelium. In this review, challenges in recovering bacteria from oral mucosa models, the potential use of these three-dimensional tissue models for the evaluation of the effects of antiseptic agents, and future directions in microbiomics are discussed.

Novel Human Full-Thickness Three-Dimensional Nonkeratinized Mucous Membrane Model for Pharmacological Studies in Wound Healing

INTRODUCTION

Efforts are increasingly aiming to develop in vitro models that can provide effective alternatives to in vivo experiments. The main aim of this study was the establishment of an in vitro model of the nonkeratinized mucous membrane that can be used as a standardized tool to evaluate biological and therapeutic effects of pharmaceuticals for mucosal wound healing.

METHODS

We established a full-thickness in vitro model of the nonkeratinized mucous membrane. While histological examination was performed to assess morphological characteristics, we utilized gene expression profiling using microarray and qRT-PCR analyses to identify molecular effects of treatment with a dexpanthenol-containing ointment after laser wounding.

RESULTS

Performing histological and immunofluorescence analyses we proved that our model mimics the two distinctive layers of the mucous membrane - the stratified squamous epithelium and the lamina propria. We used this model to investigate molecular effects of a dexpanthenol-containing ointment that is commonly used for the wound treatment of mucous membranes. For that purpose, our model exhibits a unique feature in that dexpanthenol and proliferation-enhancing additives that may interfere with our studies are not required for the maintenance of the model culture. After setting standardized lesions with a nonsequential fractional ultrapulsed CO2 laser, topical treatment with the dexpanthenol-containing ointment enhanced wound closure in the model compared to placebo and untreated controls. Furthermore, microarray analysis revealed that the treatment of the laser-wounded model with the dexpanthenol-containing ointment evoked an upregulated expression of various genes related to accelerated wound healing.

CONCLUSION

Overall, we verified that this novel mucous membrane model can be utilized in future to monitor ex vivo effects of various topical therapies on mucosa morphology, physiology, and gene expression. Our findings confirm the potential of the model as an in vitro tool for the replacement of pharmacological in vivo studies regarding mucosal wound healing.

Epigallocatechin-3-gallate inhibits proliferation and induces apoptosis in odontogenic keratocyst keratinocytes

OBJECTIVE

The aim of this study was to investigate the effects of epigallocatechin-3-gallate on the proliferation and apoptosis of odontogenic keratocyst (OKC) keratinocytes in vitro.

MATERIALS AND METHODS

Keratinocytes isolated from the epithelial lining of the OKC were cultured in keratinocyte serum-free medium and identified by CK10, CK14, pan-cytokeratin and vimentin immunofluorescence staining. The cells were exposed to EGCG at different concentrations, and proliferation inhibition was measured by cell counting kit 8 assay. Cell cycle and apoptosis were assessed by flow cytometry, and expression of the WNT signalling pathway-related proteins FZD3 and JNK3 was detected by quantitative real-time PCR and Western blotting. Human oral keratinocytes (HOKs) were used as the control.

RESULTS

The OKC keratinocytes were successfully cultured. The primary cells were tile-like and expressed the epithelial biomarkers CK10, CK14 and pan-cytokeratin. Epigallocatechin-3-gallate inhibited cell proliferation in a dose- and time-dependent manner, arrested cell cycle in the G₁ phase and induced apoptosis of OKC keratinocytes. FZD3 and JNK3 were overexpressed in OKC keratinocytes compared with HOKs and were downregulated by epigallocatechin-3-gallate treatment.

CONCLUSION

Epigallocatechin-3-gallate inhibited proliferation and induced apoptosis in OKC keratinocytes, possibly by suppressing the WNT/JNK signalling pathway. It may thus be potentially used for OKC treatment.

Treatment of intractable oral ulceration with an oral mucosa equivalent

The current use of steroids or pharmacological immunomodulators for the treatment of intractable oral ulceration is ineffective, necessitating newer cell-based therapeutic approaches. We examined the potential efficacy of an oral mucosa equivalent developed in this study in an in vivo model of repeat major oral ulceration mimicking the intractable oral ulceration observed clinically. Oral mucosal samples and plasma fibrin were obtained from Sprague-Dawley rats. The oral mucosa equivalents were prepared with cultured mucosal keratinocytes and plasma fibrin mixed with cultured fibroblasts. Ulcers were chemically induced on the rat buccal mucosa thrice in 3 weeks and covered with or without mucosa equivalents. Gross and microscopic findings and mRNA expression levels were compared between the ulcer control and mucosa equivalent groups. Oral mucosal keratinocytes and fibroblasts were cultured in vitro to achieve high viability and colony-forming efficiency. The equivalents showed epithelial and subepithelial structures similar to those of oral mucosa and exhibited high p63 positivity. In the in vivo study, ulceration was resolved earlier without significant granulation or scarring in the equivalent group than in control group (p < 0.05). Microscopic examinations revealed rapid re-epithelialization and less fibrosis in the equivalent group than in the control group (p < 0.05). Mucosa equivalent-covered ulcers showed histological characteristics similar to those of the normal buccal mucosa and exhibited lower expression of TGFB1, ACTA2, and FN1 mRNAs than the control group. The in vitro-engineered oral mucosa equivalent promotes ulcer healing without scarring and functional deficits. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 1779-1785, 2019.

Cell culture models of oral mucosal barriers: A review with a focus on applications, culture conditions and barrier properties

Understanding the function of oral mucosal epithelial barriers is essential for a plethora of research fields such as tumor biology, inflammation and infection diseases, microbiomics, pharmacology, drug delivery, dental and biomarker research. The barrier properties are comprised by a physical, a transport and a metabolic barrier, and all these barrier components play pivotal roles in the communication between saliva and blood. The sum of all epithelia of the oral cavity and salivary glands is defined as the blood-saliva barrier. The functionality of the barrier is regulated by its microenvironment and often altered during diseases. A huge array of cell culture models have been developed to mimic specific parts of the blood-saliva barrier, but no ultimate standard in vitro models have been established. This review provides a comprehensive overview about developed in vitro models of oral mucosal barriers, their applications, various cultivation protocols and corresponding barrier properties.

Oral mucosa-on-a-chip to assess layer-specific responses to bacteria and dental materials

The human oral mucosa hosts a diverse microbiome and is exposed to potentially toxic biomaterials from dental restoratives. Mucosal health is partly determined by cell and tissue responses to challenges such as dental materials and pathogenic bacteria. An in vitro model to rapidly determine potential layer-specific responses would lead to a better understanding of mucosal homeostasis and pathology. Therefore, this study aimed to develop a co-cultured microfluidic mucosal model on-a-chip to rapidly assess mucosal remodeling and the responses of epithelial and subepithelial layers to challenges typically found in the oral environment. A gingival fibroblast-laden collagen hydrogel was assembled in the central channel of a three-channel microfluidic chamber with interconnecting pores, followed by a keratinocyte layer attached to the collagen exposed in the pores. This configuration produced apical and subepithelial side channels capable of sustaining flow. Keratinocyte, fibroblast, and collagen densities were optimized to create a co-culture tissue-like construct stable over one week. Cells were stained and imaged with epifluorescence microscopy to confirm layer characteristics. As proof-of-concept, the mucosal construct was exposed separately to a dental monomer, 2-hydroxylethyl methacrylate (HEMA), and the oral bacteria Streptococcus mutans. Exposure to HEMA lowered mucosal cell viability, while exposure to the bacteria lowered trans-epithelial electrical resistance. These findings suggest that the oral mucosa-on-a-chip is useful for studying oral mucosal interactions with bacteria and biomaterials with a histology-like view of the tissue layers.

Composite tendon implant based on nanofibrillar polyhydroxybutyrate and polyamide filaments

The composite material based on reinforcement of polyamide filaments enclosed by a nonwoven matrix of nanoscaled bioresorbable poly(3-hydroxybutyrate) fibers was developed for application as an artificial ligament implant. The aim of this study was to investigate biodegradability and biocompatibility of the developed implant, as well as its stress-strain properties. The study results show the polyamide core of the implant has stress-strain properties comparable with a natural ligament. Simultaneously, the polyhydroxybutyrate external layer provides high biocompatibility and bioresorbability of the developed implant. The material has proven to be effective under in vivo tests with experimental rats as a ligament replacement for damaged Achilles tendons. Due to cell attachment and growth on the fibrous matrix during 5 weeks postsurgery, regenerated connective tissue was formed substituting for the polymeric implant, which confirmed its efficiency in contrast to the polyamide filament implant with a much longer resorption time. The results obtained indicate application prospects of polyamide-polyhydroxybutyrate implants for reconstructive surgery. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2708-2713, 2018.

Identification and In Vitro Expansion of Buccal Epithelial Cells

Ex vivo-expanded buccal mucosal epithelial (BME) cell transplantation has been used to reconstruct the ocular surface. Methods for enrichment and maintenance of BME progenitor cells in ex vivo cultures may improve the outcome of BME cell transplantation. However, the parameter of cell seeding density in this context has largely been neglected. This study investigates how varying cell seeding density influences BME cell proliferation and differentiation on tissue culture polystyrene (TCPS). The highest cell proliferation activity was seen when cells were seeded at 5×10⁴ cells/cm². Both below and above this density, the cell proliferation rate decreased sharply. Differential immunofluorescence analysis of surface markers associated with the BME progenitor cell population (p63, CK19, and ABCG2), the differentiated cell marker CK10 and connexin 50 (Cx50) revealed that the initial cell seeding density also significantly affected the progenitor cell marker expression profile. Hence, this study demonstrates that seeding density has a profound effect on the proliferation and differentiation of BME stem cells in vitro, and this is relevant to downstream cell therapy applications.

Phenotypic markers of oral keratinocytes seeded on two distinct 3D oral mucosa models

This study validates the use of a full-thickness oral mucosa model for in vitro studies with a collagen type I matrix, by comparison of this model with two other 3D oral mucosa models: human-sourced and porcine acellular dermal matrices (AlloDerm®/Strattice®, respectively). For the collagen matrix model, gingival fibroblasts were seeded either onto the dermal side of the AlloDerm® and Strattice® matrices or within the collagen matrices in complete culture medium (DMEM). For all scaffolds, DMEM was replaced every 24 h up to 72 h. For the full-thickness oral mucosa models, 72 h after fibroblast seeding, oral keratinocytes were seeded on the epidermal sides of AlloDerm® and Strattice® matrices or collagen matrices. All matrices and models were subjected to histological analysis, complementing phenotypic characterization by evaluation of glucose consumption, cell proliferation, gene expression and synthesis of growth factors. A higher fibroblast ratio was observed for the collagen matrix, in which the distribution of gingival fibroblasts was also more homogeneous. Metabolism, proliferation, and gene expression and synthesis of VEGF of these cells were also increased for the collagen matrix. All matrices provided a suitable substrate for oral keratinocytes adhesion, proliferation, and phenotypic expression; however, higher proliferation, stratification, and differentiation were noted when oral keratinocytes were seeded on the dermal matrices.

In vitro Cytokeratin Expression Profiling of Human Oral Mucosa Substitutes Developed by Tissue Engineering

In this work we performed a study of cytokeratin (CK) expression profiling on human artificial oral mucosa developed in vitro by tissue engineering at different stages of maturation (from immature to well-developed stages) at the protein and mRNA levels. Human artificial oral mucosa was generated in the laboratory using fibrin-agarose biomaterials. As controls, we used human native normal oral mucosa and embryonic oral tissues. Our results demonstrated that human embryonic oral tissues tended to express CK8 and CK19. In contrast, monolayered bioengineered oral mucosa did not show any CK expression by immunohistochemistry whereas bilayered and multilayered artificial oral mucosa showed several markers of stratified epithelia, but did not express CK10. These results suggest that the CK expression pattern is strongly dependent on the maturation state of the artificial tissues and that the CK expression profile of our model of artificial oral mucosa was partially similar to that of the non-keratinized human adult oral mucosa. However, the expression of CK8 by the artificial oral mucosa suggests that these samples correspond to an early stage of development while kept in vitro.

Development of a Full-Thickness Human Gingiva Equivalent Constructed from Immortalized Keratinocytes and Fibroblasts

Organotypic models make it possible to investigate the unique properties of oral mucosa in vitro. For gingiva, the use of human primary keratinocytes (KC) and fibroblasts (Fib) is limited due to the availability and size of donor biopsies. The use of physiologically relevant immortalized cell lines would solve these problems. The aim of this study was to develop fully differentiated human gingiva equivalents (GE) constructed entirely from cell lines, to compare them with the primary cell counterpart (Prim), and to test relevance in an in vitro wound healing assay. Reconstructed gingiva epithelium on a gingiva fibroblast-populated collagen hydrogel was constructed from cell lines (keratinocytes: TERT or HPV immortalized; fibroblasts: TERT immortalized) and compared to GE-Prim and native gingiva. GE were characterized by immunohistochemical staining for proliferation (Ki67), epithelial differentiation (K10, K13), and basement membrane (collagen type IV and laminin 5). To test functionality of GE-TERT, full-thickness wounds were introduced. Reepithelialization, fibroblast repopulation of hydrogel, metabolic activity (MTT assay), and (pro-)inflammatory cytokine release (enzyme-linked immunosorbent assay) were assessed during wound closure over 7 days. Significant differences in basal KC cytokine secretion (IL-1α, IL-18, and CXCL8) were only observed between KC-Prim and KC-HPV. When Fib-Prim and Fib-TERT were stimulated with TNF-α, no differences were observed regarding cytokine secretion (IL-6, CXCL8, and CCL2). GE-TERT histology, keratin, and basement membrane protein expression very closely represented native gingiva and GE-Prim. In contrast, the epithelium of GE made with HPV-immortalized KC was disorganized, showing suprabasal proliferating cells, limited keratinocyte differentiation, and the absence of basement membrane proteins. When a wound was introduced into the more physiologically relevant GE-TERT model, an immediate inflammatory response (IL-6, CCL2, and CXCL8) was observed followed by complete reepithelialization. Seven days after wounding, tissue integrity, metabolic activity, and cytokine levels had returned to the prewounded state. In conclusion, immortalized human gingiva KC and fibroblasts can be used to make physiologically relevant GE, which resemble either the healthy gingiva or a neoplastic disease model. These organotypic models will provide valuable tools to investigate oral mucosa biology and can also be used as an animal alternative for drug targeting, vaccination studies, microbial biofilm studies, and testing new therapeutics.

Use of Integra in oral reconstruction: a case series

OBJECTIVE

Small intraoral defects are usually reconstructed using skin autografts. However, the goal of this research was to describe an alternative to classic techniques using artificial dermis (Integra) in the reconstruction of these types of injuries.

MATERIALS AND METHODS

Four patients with small intraoral lesions in different locations underwent resection. The created defects were covered with a bilayer of Integra; then, a chlorhexidine stent cure (Laboratorios Salvat, Barcelona, Spain) was applied. The patients were followed up daily during the first week to detect any signs of infection, dehiscence, or loss of the lamina. Thereafter, they were followed up once a week for 1 month.

RESULTS

None of the patients presented with infections or loss of the dermis. When the silicon sheet was detached, granulation tissue was detected, with complete re-epithelialization of the lesion in the postoperative weeks 3 to 4.

CONCLUSIONS

The use of the Integra allowed for the rapid reconstruction of slight intraoral defects while preventing the morbidity associated with classic techniques. In this study, no complications were observed.

Plasticity of oral mucosal cell sheets for accelerated and scarless skin wound healing

OBJECTIVES

Wound healing is generally faster and associated with less scarring in the oral mucosa than in the skin. Although rarely studied, oral mucosa equivalents may contribute to rapid, scarless cutaneous wound healing. Therefore, we examined the potential utility of our newly developed oral mucosal cell sheet in skin wound healing.

MATERIALS AND METHODS

Oral mucosa and skin samples were obtained from surgical patients and Sprague-Dawley rats. Keratinocytes and fibroblasts were primarily cultured for in vitro cell expansion. Mucosa and skin equivalents were produced with a mixture of cultured fibroblasts and autologous fibrin from plasma and seeding keratinocytes. Mucosal and skin cell sheets were transplanted in full-thickness excisional wounds of rat skin with control wounds. Gross, histological, and molecular characteristics of wound healing according to different postsurgical days were compared in control and cell sheet-covered wounds.

RESULTS

Keratinocytes and fibroblasts derived from the oral mucosa were cultured faster than those derived from the skin. The in vitro-engineered oral mucosa and skin equivalents were successfully produced using complete autologous mucosa or skin and plasma fibrin, showing similarity to the histological characteristics of the skin or mucosa. In the in vivo rat model, the oral mucosal and skin cell sheet promoted wound healing with early wound closure and less scarring. The cell sheet-treated wounds showed lower TGF-β1, α-smooth muscle actin, and fibronectin mRNA expression than the control wounds.

CONCLUSIONS

The oral mucosal cell sheet demonstrated in vivo tissue plasticity through good adaptation to skin wounds, contributing to accelerated and scarless healing.

LLLT Effects on Oral Keratinocytes in an Organotypic 3D Model

Several in vitro studies evaluated the cellular and molecular events related to interactions between phototherapy and target tissues, including oral keratinocytes and fibroblasts, providing elucidative data about phototherapy-induced healing. However, these interactions were limited to the application of a bidimensional cell culture model of oral mucosal cells. Thus, thisstudy evaluated the use of an organotypic oral epithelium model to elucidate the morphological and phenotypic responses of cells subjected to low-level laser therapy (LLLT). Oral keratinocytes were seeded in the ex vivo-produced oral mucosal equivalent (EVPOME) model, with a porcine acellular dermal matrix. LLLT was applied by means of the LaserTABLE device (780 nm, 25 mW) at 0.5, 1.5 and 3 J cm^-2 . After three irradiations, morphology, proliferation and gene expression of growth factors were assessed. LLLT and control groups presented similar morphological features, characterized by the formation of a stratified, differentiated and keratinized epithelium. LLLT enhanced the cell proliferation and gene expression of keratinocytes (hKGF) as well as epidermal (hEGF) growth factors. In general, analysis of these data shows that the three-dimensional cell culture model can be applied for phototherapy studies and that the positive effects of LLLT were confirmed by the use of an organotypic model.

Accelerated oral wound healing using a pre-vascularized mucosal cell sheet

Cell sheets with pre-vascularization have recently been developed but remain relatively untested in oral wound healing. Therefore, we examined the potential utility of our newly developed pre-vascularized mucosal cell sheets in oral wound healing. Mucosal keratinocytes, fibroblasts, and endothelial progenitor cells were primarily cultured for in vitro cell expansion from mucosa and blood of Sprague-Dawley rats. Mucosal cell sheets were generated using cultured keratinocytes and plasma fibrin (K sheet) or keratinocytes and a mixture of fibrin, fibroblasts, and endothelial cells (PV sheet). Autologous sheets were transplanted on deep wounds in the buccal region of rats. The gross and histological characteristics of wound healing were compared among control wound, K sheet, and PV sheet groups. We successfully cultured and expanded keratinocytes, fibroblasts, and endothelial progenitor cells in vitro for generating mucosal cell sheets with or without pre-vascularization. In the in vivo oral wound model, compared with the control wound, the PV sheet group exhibited rapid wound closure more prominently than the K sheet group. The histological healing in the PV sheet group was similar to that in rat normal buccal mucosa without fibrosis. The pre-vascularized mucosal cell sheet exhibited in vivo efficacy in oral wound healing by promoting accelerated healing.

Biological Interaction Between Human Gingival Fibroblasts and Vascular Endothelial Cells for Angiogenesis: A Co-culture Perspective

Advancement in cell culture protocols, multidisciplinary research approach, and the need of clinical implication to reconstruct damaged or diseased tissues has led to the establishment of three-dimensional (3D) test systems for regeneration and repair. Regenerative therapies, including dental tissue engineering, have been pursued as a new prospect to repair and rebuild the diseased/lost oral tissues. Interactions between the different cell types, growth factors, and extracellular matrix components involved in angiogenesis are vital in the mechanisms of new vessel formation for tissue regeneration. In vitro pre-vascularization is one of the leading scopes in the tissue-engineering field. Vascularization strategies that are associated with co-culture systems have proved that there is communication between different cell types with mutual beneficial effects in vascularization and tissue regeneration in two-dimensional or 3D cultures. Endothelial cells with different cell populations, including osteoblasts, smooth muscle cells, and fibroblasts in a co-culture have shown their ability to advocate pre-vascularization. In this review, a co-culture perspective of human gingival fibroblasts and vascular endothelial cells is discussed with the main focus on vascularization and future perspective of this model in regeneration and repair.

Electrospun polyurethane nanofiber scaffolds with ciprofloxacin oligomer versus free ciprofloxacin: Effect on drug release and cell attachment

An electrospun degradable polycarbonate urethane (PCNU) nanofiber scaffold loaded with antibiotic was investigated in terms of antibacterial efficacy and cell compatibility for potential use in gingival tissue engineering. Antimicrobial oligomer (AO), a compound which consists of two molecules of ciprofloxacin (CF) covalently bound via hydrolysable linkages to triethylene glycol (TEG), was incorporated via a one-step blend electrospinning process using a single solvent system at 7 and 15% w/w equivalent CF with respect to the PCNU. The oligomeric form of the drug was used to overcome the challenge of drug aggregation and burst release when antibiotics are incorporated as free drug. Electrospinning parameters were optimized to obtain scaffolds with similar alignment and fiber diameter to non-drug loaded fibers. AO that diffused from the fibers was hydrolysed to release CF slowly and in a linear manner over the duration of the study, whereas scaffolds with CF at the same concentration but in free form showed a burst release within 1h with no further release throughout the study duration. Human gingival fibroblast (HGF) adhesion and spreading was dependent on the concentration and form the CF was loaded (AO vs. free CF), which was attributed in part to differences in scaffold surface chemistry. Surface segregation of AO was quantified using surface-resolved X-ray photoelectron spectroscopy (XPS). These findings are encouraging and support further investigation for the use of AO as a means of attenuating the rapid release of drug loaded into nanofibers. The study also demonstrates through quantitative measures that drug additives have the potential to surface-locate without phase separating from the fibers, leading to fast dissolution and differential fibroblast cell attachment.

Construction and characterization of a multilayered gingival keratinocyte culture model: the TURK-U model

In construction of epithelial cells as multilayers, the cells are grown submerged to confluence on fibroblast-embedded collagen gels and, then, lifted to air to promote their stratification. We recently demonstrated that gingival epithelial cells form uniform monolayers on semi-permeable nitrocellulose membranes, supported with a semi-solid growth medium, which allows the cells to grow at an air-liquid-solid interface from the beginning of the culturing protocol. In this study, the aim was to further develop our previous model to form a multilayered gingival epithelial culture model. Two different epithelial cell lines (HaCaT from skin and HMK from gingiva) were used in all experiments. Both cell lines were grown first as monolayers for 3 days. After that, keratinocytes were trypsinized, counted and seeded on a sterile semi-permeable nitrocellulose membrane placed on the top of a semi-solid growth medium, forming an air-liquid-solid interface for the cells to grow. At days 1, 4, and 7, epithelial cells were fixed, embedded in paraffin, and sectioned for routine Hematoxylin-Eosin staining and immunohistochemistry for cytokeratin (Ck). At day 1, HMK cells grew as monolayers, while HaCaT cells stratified forming an epithelium with two to three layers. At day 4, a stratified epithelium in the HMK model had four to five layers and its proliferation continued up to day 7. HaCaT cells formed a dense and weakly proliferating epithelium with three to four layers of stratification at day 4 but the proliferation disappeared at day 7. At all days, both models were strongly positive for Ck5, Ck7, and Ck 19, and weakly positive for Ck10. Gingival epithelial cells stratify successfully on semi-permeable nitrocellulose membranes, supported with a semi-solid growth medium. This technique allows researchers to construct uniform gingival epithelial cell multilayers at an air-liquid-solid interface, without using collagen gels, resulting in a more reproducible method.