Can surgeons optimize range of motion and reduce scapulohumeral impingements in reverse shoulder arthroplasty? A computational study

Functional and radiographic outcomes of reverse shoulder arthroplasty with a minimum follow-up of 10 years

BACKGROUND

The use of reverse shoulder arthroplasty (RSA) is becoming increasingly prevalent. However, few studies have been published reporting the long-term outcomes of RSA. This study aims to report the clinical, radiographic, and patient-reported outcomes of the Delta Xtend reverse shoulder prosthesis, performed by a single surgeon and with a minimum follow-up of 10 years.

METHODS

All RSA procedures performed between 2005 and 2012 were identified. Patients were contacted and invited for a follow-up visit including clinical assessment, radiographs, and patient-reported outcome measures. Patients with a follow-up of less than 10 years were excluded. The revision-free implant survival was calculated at 10 years. Between 2005 and 2012, 119 procedures in 116 patients meeting inclusion criteria were identified. Of these patients, 35 were deceased before reaching the 10-year follow-up and 23 could not be reached. In total, 63 RSAs could be included in 61 patients (response rate: 75%). The median follow-up was 11.7 years (interquartile range [IQR]: 10.5-13.2).

RESULTS

Of the 61 patients, 7 patients underwent a revision after a median of 3 years (IQR: 0.2-9.8) during the total follow-up period. The 10-year implant survival was 94% (95% confidence interval: 84-98). At final follow-up, the median anterior elevation was 135° (IQR: 130°-160°), the median abduction was 120° (IQR: 100°-135°), and the median level reached with internal rotation was L5 (IQR: sacrum-L5). The median Auto-Constant score was 68 (IQR: 53-78), the median Subjective Shoulder Value was 80 (IQR: 70-93), and the median pain score was 0.2/10 (IQR: 0-2). In total, radiographs could be obtained in 25 patients (40%). Scapular notching occurred in 10 patients (40%), which was classified as Sirveaux-Nerot grade IV in 3 patients (12%). Ossification occurred in 10 patients (40%), and stress shielding in 2 patients (8%). Radiolucencies were observed around the humeral component in 24 patients (96%) and around the glenoid component in 13 patients (52%).

CONCLUSION

The long-term results of RSA with a Delta Xtend prosthesis are favorable, with long-term improvement in range of motion and patient-reported outcome measures, and a satisfactory implant survival rate. Interestingly, the radiographical analysis showed high prevalence of signs associated with loosening, which did not seem to translate to high complication rates or inferior results.

Is preoperative 3D planning reliable for predicting postoperative clinical differences in range of motion between two stem designs in reverse shoulder arthroplasty

BACKGROUND

We aim to predict a clinical difference in the postoperative range of motion (RoM) between 2 reverse shoulder arthroplasty (RSA) stem designs (Inlay-155° and Onlay-145°) using preoperative planning software. We hypothesized that preoperative 3D planning could anticipate the differences in postoperative clinical RoM between 2 humeral stem designs and by keeping the same glenoid implant.

METHODS

Thirty-seven patients (14 men and 23 women, 76 ± 7 years) underwent a BIO-RSA (bony increased offset-RSA) with the use of preoperative planning and an intraoperative 3-dimensional-printed patient-specific guide for glenoid component implantation between January 2014 and September 2019 with a minimum follow-up of 2 years. Two types of humeral implants were used: Inlay with a 155° inclination (Inlay-155°) and Onlay with a 145°inclination (Onlay-145°). Glenoid implants remained unchanged. The postoperative RSA angle (inclination of the area in which the glenoid component of the RSA is implanted) and the lateralization shoulder angle were measured to confirm the good positioning of the glenoid implant and the global lateralization on postoperative X-rays. A correlation between simulated and clinical RoM was studied. Simulated and last follow-up active forward flexion (AFE), abduction, and external rotation (ER) were compared between the 2 types of implants.

RESULTS

No significant difference in RSA and lateralization shoulder angle was found between planned and postoperative radiological implants' position. Clinical RoM at the last follow-up was always significantly different from simulated preoperative RoM. A low-to-moderate but significant correlation existed for AFE, abduction, and ER (r = 0.45, r = 0.47, and r = 0.57, respectively; P < .01). AFE and abduction were systematically underestimated (126° ± 16° and 95° ± 13° simulated vs. 150° ± 24° and 114° ± 13° postoperatively; P < .001), whereas ER was systematically overestimated (50° ± 19° simulated vs. 36° ± 19° postoperatively; P < .001). Simulated abduction and ER highlighted a significant difference between Inlay-155° and Onlay-145° (12° ± 2°, P = .01, and 23° ± 3°, P < .001), and this was also retrieved clinically at the last follow-up (23° ± 2°, P = .02, and 22° ± 2°, P < .001).

CONCLUSIONS

This study is the first to evaluate the clinical relevance of predicted RoM for RSA preoperative planning. Motion that involves the scapulothoracic joint (AFE and abduction) is underestimated, while ER is overestimated. However, preoperative planning provides clinically relevant RoM prediction with a significant correlation between both and brings reliable data when comparing 2 different types of humeral implants (Inlay-155° and Onlay-145°) for abduction and ER. Thus, RoM simulation is a valuable tool to optimize implant selection and choose RSA implants to reach the optimal RoM.

Scapular Fractures After Reverse Shoulder Arthroplasty

With the increased use of reverse shoulder arthroplasty, the complication of postoperative scapular fracture is increasingly recognized. The incidence is variable and dependent on a combination of factors including patient age, sex, bone mineral density, diagnosis of inflammatory arthritis, acromial thickness, and implant-related factors. Acromial stress reactions are a clinical diagnosis based on a history and physical examination. These are treated successfully with 4 to 6 weeks of immobilization. Acromial stress fractures are visible on imaging studies and are classified based on anatomic location by the classification systems of Crosby and Levy. In approximately 20% of fractures, a CT scan is necessary to make the diagnosis. Treatment is typically nonsurgical that leads to a high rate of nonunion or symptomatic malunion. Scapular spine fractures (type III) can be treated with either nonsurgical or surgical management; however, obtaining fracture union is challenging, and the outcomes are typically inferior to that of type I and II fractures. Although the nonsurgical and surgical treatment of acromial stress fractures improves the clinical outcomes from the patient's preoperative state, the outcomes of a control group undergoing reverse shoulder arthroplasty without fracture are better. The exception to this is oftentimes the displaced and angulated type III fracture.

Identification of threshold pathoanatomic metrics in primary glenohumeral osteoarthritis

BACKGROUND

An assessment of the pathoanatomic parameters of the arthritic glenohumeral joint (GHJ) has the potential to identify discriminating metrics to differentiate glenoid types in shoulders with primary glenohumeral osteoarthritis (PGHOA). The aim was to identify the morphometric differences and threshold values between glenoid types including normal and arthritic glenoids with the various types in the Walch classification. We hypothesized that there would be clear morphometric discriminators between the various glenoid types and that specific numeric threshold values would allow identification of each glenoid type.

METHODS

The computed tomography scans of 707 shoulders were analyzed: 585 obtained from shoulders with PGHOA and 122 from shoulders without glenohumeral pathology. Glenoid morphology was classified according to the Walch classification. All computed tomography scans were imported in a dedicated automatic 3D-software program that referenced measurements to the scapular body plane. Glenoid and humeral modeling was performed using the best-fit sphere method, and the root-mean-square error was calculated. The direction and orientation of the glenoid and humerus described glenohumeral relationships.

RESULTS

Among shoulders with PGHOA, 90% of the glenoids and 85% of the humeral heads were directed posteriorly in reference to the scapular body plane. Several discriminatory pathoanatomic parameters were identified: GHJ narrowing < 3 mm was a discriminatory metric for type A glenoids. Posterior humeral subluxation > 70% discriminated type B1 from normal GHJs. The root-mean-square error was a discriminatory metric to distinguish type B2 from type A, type B3, and normal GHJs. Type B3 glenoids differed from type A2 by greater retroversion (>13°) and subluxation (>71%). The type C glenoid retroversion inferior limit was 21°, whereas normal glenoids never presented with retroversion > 16°.

CONCLUSION

Pathoanatomic metrics with the identified threshold values can be used to discriminate glenoid types in shoulders with PGHOA.