Functional Acetabular Component Positioning During Direct Anterior Approach Hip Arthroplasty Using a Novel Three-Dimensional Virtual Mesh Imaging System With Fluoroscopy

BACKGROUND

Optimal position of total hip arthroplasty (THA) components is critical for joint mechanics and stability. Acetabular component positioning during supine surgery in direct anterior approach (DAA) THA may be different in the standing position postoperatively, which traditional fluoroscopy is unable to predict. A novel 3-dimensional (3D) image analysis technology (IAT) that uses artificial intelligence to measure the tilt and rotation of the pelvis has enabled prediction of component positioning from supine to standing. The purpose of this study was to compare intraoperative fluoroscopy, non-3D-IAT, and 3D-IAT with postoperative standing radiographs to assess the accuracy of component positioning.

METHODS

From 2022 to 2023, 30 consecutive patients (86.6% women, mean age 59 [range, 55 to 67]) undergoing primary DAA THA with the use of the 3D-IAT were identified. A separate cohort of 148 patients from 2020 to 2021 (85% women, mean age 65 [range, 55 to 69]) who underwent DAA THA with non-3D-IAT was used for comparison. Leg length discrepancy (LLD), cup anteversion, and inclination were manually measured on intraoperative fluoroscopic images and digitally measured using IAT. Follow-up evaluation occurred at 1 month with standing pelvis radiographs measured using Ein Bild Röntgen Analyze-Cup software. Measurements were compared via Wilcoxon signed rank tests where P ≤ .05 indicates significantly different measurements.

RESULTS

Median LLD, inclination, and anteversion measurements via non-3D-IAT and fluoroscopy were significantly different compared to postoperative standing radiographs (P < .001). The 3D-IAT more accurately predicted LLD, abduction, and anteversion, with values not significantly different from postoperative standing measurements (P = .23, P = .93, and P = .36, respectively).

CONCLUSIONS

The use of the 3D-IAT during DAA THA allowed for the more accurate prediction of acetabular component position in the standing position postoperatively.

Acetabular Distraction Technique: A Multicenter Study With a Minimum 2-Year Radiographic Follow-Up

BACKGROUND

Chronic pelvic discontinuity is a challenge during revision total hip arthroplasty due to the loss of structural continuity of the superior and inferior aspects of the acetabulum from severe acetabular bone loss. Acetabular distraction provides an alternative surgical treatment by stabilizing the acetabular component through elastic recoil of the pelvis, which may be supplemented with modular porous augments for addressing major acetabular defects. This study reports 2-year radiographic findings following acetabular distraction for the treatment of chronic pelvic discontinuity.

METHODS

Patients undergoing acetabular distraction performed by 5 surgeons from 2002 to 2021 were identified across 5 institutions. Demographic, surgical, and postoperative outcomes, including radiographic component stability, were recorded. There were 53 of 91 (58.2%) patients (5 deceased, 33 lost to follow-up) consisting of 4 Paprosky IIC (7.5%), 8 Paprosky IIIA (15.1%), and 41 Paprosky IIIB (77.4%) defects included, with a mean follow-up time of 4.8 years (range, 2 to 13.5). Modular porous augments were used in 33 (62.3%) cases. Failure was defined as a subsequent revision of the acetabular construct.

RESULTS

Among the 13 (24.5%) patients who returned to the operating room, 6 (46.2%) had a prior history of revision total hip arthroplasty before undergoing acetabular distraction. Only 5 (9.4%) patients underwent acetabular revision following acetabular distraction, leading to an overall cup survivorship of 90.6%. Of the remaining 48 patients, 46 (95.8%) had evidence of radiographic bridging callus of the chronic pelvic discontinuity at their last clinical follow-up.

CONCLUSIONS

To our knowledge, in the largest series to date, acetabular distraction has proven to be a viable treatment for acetabular bone loss with a chronic pelvic discontinuity, with excellent early survivorship and radiographic evidence of bridging callus. Future studies with longer follow-ups are needed to further monitor the efficacy of this technique.

LEVEL OF EVIDENCE

Level III, Retrospective Comparative Study.

Comparing the Clinical and Radiographic Outcomes of Two Different Surgical Approaches for Treating Infrabony Defects in Chronic Periodontitis Patients

Background

Chronic periodontitis is a prevalent oral health issue, affecting a substantial portion of the population. Infrabony defects, characterized by bone loss around teeth, are a hallmark of this condition and require surgical intervention to prevent further damage and tooth loss. Two commonly used surgical approaches are open flap debridement (OFD) and guided tissue regeneration (GTR).

Materials and Methods

This prospective cohort study included 60 patients with chronic periodontitis and infrabony defects. Patients were randomly assigned to either the OFD or GTR group. Clinical parameters, including probing depth (PD) and clinical attachment level (CAL), were recorded at baseline and at 6-month and 12-month follow-up appointments. Radiographic assessments were conducted using periapical radiographs. The primary outcome measures were changes in PD and CAL, while secondary outcomes included radiographic evidence of bone regeneration.

Results

At the 6-month follow-up, the OFD group demonstrated an average reduction in PD of 2.4 mm (SD = 0.8) and an increase in CAL of 1.6 mm (SD = 0.5). In contrast, the GTR group showed a reduction in PD of 2.1 mm (SD = 0.7) and an increase in CAL of 1.9 mm (SD = 0.6). These differences were not statistically significant (P > 0.05). Radiographic analysis indicated a mean bone fill of 1.2 mm (SD = 0.4) in the OFD group and 1.4 mm (SD = 0.3) in the GTR group at 12 months, with no significant difference observed between the two groups (P > 0.05).

Conclusion

In this study, both OFD and GTR approaches demonstrated comparable clinical and radiographic outcomes in the treatment of infrabony defects in chronic periodontitis patients.

Long-term results of the AptisTM total distal radioulnar joint prosthesis after previous failed surgical procedures

We present a prospective study with the results of ten Aptis total distal radioulnar joint replacements in patients who had one to five previous operations. The mean postoperative follow-up was 9.7 years (range 3-14.7). The mean postoperative range of motion of the wrist improved by 9° for extension, 15° for flexion, 10° for pronation and 14° for supination, achieving values equivalent to 88%, 78%, 97% and 88% of those of the non-operated hand. There were minimal changes in radial and ulnar deviations. Grip strength improved by 7 kg, pain decreased by 8 points, QuickDASH and Mayo wrist scores improved by 51 and 53 points, respectively. Two implants had radiolucency less than 1 mm. Serum titanium ion levels were slightly elevated in two patients. Three prostheses required revision surgery for heterotopic ossification, a prominent radial screw and a periprosthetic fracture. No prostheses were removed. Six patients returned to their former professional activities and four patients adapted their jobs.Level of evidence: IV.

Anatomical front and back reconstruction sustains radiographic alignment: a comparison to three-ligament tenodesis

Multiple techniques exist to reconstruct the scapholunate interosseous ligament, though none have demonstrated superiority. This study compares 1-year radiographic outcomes of the three-ligament tenodesis and the anatomical front and back reconstruction. All patients who underwent reconstruction of their scapholunate interosseous ligament at one institution with either anatomical front and back reconstruction or three-ligament tenodesis between 2011 and 2020 were retrospectively reviewed. At 52-week follow-up, anatomical front and back reconstruction maintained a statistically significant improvement in scapholunate gap, corrected radiolunate angle and dorsal scaphoid translation, while three-ligament tenodesis demonstrated no sustained improvement in any parameter. The improvement in dorsal scaphoid translation was significantly greater for patients undergoing anatomical front and back reconstruction compared with three-ligament tenodesis at the 16-weeks postoperative timepoint (-1.0 mm, -0.3 mm). Anatomical front and back reconstruction demonstrates sustained improvement in radiographic outcomes at 1 year when compared with three-ligament tenodesis. By addressing both volar and dorsal critical ligament restraints, adoption of anatomical front and back reconstruction for advanced stage scapholunate interosseous ligament injuries should be considered.Level of evidence: IV.

Functional and radiographic outcomes of reverse shoulder arthroplasty with a minimum follow-up of 10 years

BACKGROUND

The use of reverse shoulder arthroplasty (RSA) is becoming increasingly prevalent. However, few studies have been published reporting the long-term outcomes of RSA. This study aims to report the clinical, radiographic, and patient-reported outcomes of the Delta Xtend reverse shoulder prosthesis, performed by a single surgeon and with a minimum follow-up of 10 years.

METHODS

All RSA procedures performed between 2005 and 2012 were identified. Patients were contacted and invited for a follow-up visit including clinical assessment, radiographs, and patient-reported outcome measures. Patients with a follow-up of less than 10 years were excluded. The revision-free implant survival was calculated at 10 years. Between 2005 and 2012, 119 procedures in 116 patients meeting inclusion criteria were identified. Of these patients, 35 were deceased before reaching the 10-year follow-up and 23 could not be reached. In total, 63 RSAs could be included in 61 patients (response rate: 75%). The median follow-up was 11.7 years (interquartile range [IQR]: 10.5-13.2).

RESULTS

Of the 61 patients, 7 patients underwent a revision after a median of 3 years (IQR: 0.2-9.8) during the total follow-up period. The 10-year implant survival was 94% (95% confidence interval: 84-98). At final follow-up, the median anterior elevation was 135° (IQR: 130°-160°), the median abduction was 120° (IQR: 100°-135°), and the median level reached with internal rotation was L5 (IQR: sacrum-L5). The median Auto-Constant score was 68 (IQR: 53-78), the median Subjective Shoulder Value was 80 (IQR: 70-93), and the median pain score was 0.2/10 (IQR: 0-2). In total, radiographs could be obtained in 25 patients (40%). Scapular notching occurred in 10 patients (40%), which was classified as Sirveaux-Nerot grade IV in 3 patients (12%). Ossification occurred in 10 patients (40%), and stress shielding in 2 patients (8%). Radiolucencies were observed around the humeral component in 24 patients (96%) and around the glenoid component in 13 patients (52%).

CONCLUSION

The long-term results of RSA with a Delta Xtend prosthesis are favorable, with long-term improvement in range of motion and patient-reported outcome measures, and a satisfactory implant survival rate. Interestingly, the radiographical analysis showed high prevalence of signs associated with loosening, which did not seem to translate to high complication rates or inferior results.

Evaluation of Radiographic Parameters Following Dorsal Wrist-Spanning Plate Fixation of Distal Radius Fractures to the Second Versus Third Metacarpal

PURPOSE

Dorsal wrist-spanning plate fixation for comminuted, intra-articular distal radius fractures involves the indirect reduction of intra-articular fractures via ligamentotaxis. The reduction is maintained by application of a bridge plate from the radial diaphysis to either the second or third metacarpal. The objective of this study was to retrospectively compare radiographic outcomes between distal radius fractures managed with bridge plate fixation to the second versus third metacarpal.

METHODS

A single-institution retrospective review identified 50 cases of distal radius fractures that underwent dorsal wrist-spanning plate fixation, with 9 and 41 fractures undergoing fixation to the second and third metacarpals, respectively. Radiographic parameters, such as radial height, radial inclination, volar tilt, and ulnar variance, were measured at 3 time points: immediately after surgery, immediately prior to elective plate removal, and at the final follow-up. Radiographic measurements of the 2 cohorts were compared at the 3 time points.

RESULTS

Final radiographs showed an average radial height of 8.9 mm versus 9.4 mm for the second versus third metacarpal cohorts, respectively; average radial inclination of 17.4° for both the second and third metacarpal cohorts; average volar tilt of 1.9° versus 1.7° for the second versus third metacarpal cohorts, respectively; and an average ulnar variance of +0.6 mm versus +0.1 mm for the second versus third metacarpal cohorts, respectively. Radiographic parameters of the second and third metacarpal cohorts were similar across all the time points. Additionally, evaluation of the radiographic parameters across the 3 time points (immediately after surgery, immediately prior to elective plate removal, and at the final follow-up) demonstrated little to no loss of radiographic alignment.

CONCLUSIONS

Radiographic outcomes for distal radius fractures managed with bridge plate fixation to the second versus third metacarpal appear similar. The distal plate fixation site can likely be determined on the basis of fracture anatomy and patient-specific features.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

Patients who have intraoperative deviations in their preoperative plan have inferior clinical and radiographic outcomes after anatomic total shoulder arthroplasty

BACKGROUND

Three-dimensional computed tomography preoperative planning has become adopted among shoulder arthroplasty surgeons. Prior studies have not examined outcomes in patients in whom the surgeon implanted prostheses that deviated from the preoperative plan compared with patients in whom the surgeon followed the preoperative plan. The hypothesis of this study was that clinical and radiographic outcomes would be equivalent between patients undergoing anatomic total shoulder arthroplasty that had a deviation in the components predicted in the preoperative plan and patients who did not have a change in the components predicted in the preoperative plan.

METHODS

A retrospective review of patients who had preoperative planning for anatomic total shoulder arthroplasty from March 2017 through October 2022 was performed. Patients were stratified into 2 groups: patients in whom the surgeon used components that deviated from those anticipated by the preoperative plan (changed group), and patients in whom the surgeon used all of the components anticipated by the preoperative plan (planned group). Patient-determined outcomes including the Western Ontario Osteoarthritis Index, American Shoulder and Elbow Surgeons score, Single Assessment Numeric Evaluation, Simple Shoulder Test (SST), and Shoulder Activity Level were recorded preoperatively, at 1 year, and at 2 years. Preoperative and 1-year postoperative range of motion was recorded. Radiographic parameters to assess restoration of proximal humeral anatomy included humeral head height, humeral neck angle, humeral centering on the glenoid, and postoperative restoration of the anatomic center of rotation.

RESULTS

A total of 159 patients had intraoperative changes to their preoperative plan, and 136 patients underwent arthroplasty without changes to their preoperative plan. The planned group had higher scores than the group that had a deviation in the preoperative plan for every patient-determined outcome metric at every postoperative time point with statistically significant improvements found in the SST and Single Assessment Numeric Evaluation at 1-year and the SST and American Shoulder and Elbow Surgeons score at 2-year follow-up. No differences were found in range of motion metrics between the groups. Patients who did not have a deviation in their preoperative plan had more optimal restoration of their postoperative radiographic center of rotation than patients who did have a deviation in their preoperative plan.

CONCLUSIONS

Patients who have intraoperative changes to their preoperative plan have (1) inferior postoperative patient-determined outcome scores at 1 and 2 years after surgery and (2) a larger deviation in the postoperative radiographic restoration of the humeral center of rotation than patients who did not have intraoperative changes from the initial plan.

Cementless tapered wedge stems in patients undergoing primary total hip arthroplasty with Dorr C bone-are complication risks increased?

Background

The use of cementless femoral stems in patients undergoing primary total hip arthroplasty (THA) with Dorr C bone remains controversial for fear of fracture or subsidence. Purpose of this multicenter study was to compare clinical outcomes and complications of THA using a tapered femoral prosthesis in patients with Dorr C bone versus Dorr A/B bone.

Methods

A total of 1,030 patients underwent primary THA with a tapered wedge femoral stem at a minimum one year follow up. Forty-eight patients with Dorr C bone (mean age 68.7 years) were compared with a matched cohort of patients with Dorr A/B bone (mean age 69.9 years). Mean follow-up was approximately 4 years in both cohorts. There were no differences in sex, age, body mass index (BMI), Harris Hip Score (HHS), complications, and radiographic outcomes including subsidence and aseptic loosening were evaluated.

Results

Postoperative HHSs were a mean of 82 points in the Dorr C cohort compared to 84 points in the Door A/B cohort (P=0.2653). There was no significant difference in complication or revision rates for any reason (P=0.23). Mean subsidence for the Dorr C and Dorr A/B was 1.4 and 1.2 mm, respectively (P=0.5164), and there was no aseptic loosening of the femoral component found in either group.

Conclusions

Current generation tapered wedge cementless femoral stems provide stable fixation for patients with Dorr C bone quality without increased complications with respect to fracture or subsidence and can be considered an alternative to cemented stems in patients with compromised bone quality.

Decreased Complication Rate Using Partially Threaded Compared With Fully Threaded Compression Screws in 4 Corner Arthrodesis: A Retrospective Study

BACKGROUND

Scapho-lunate advanced collapse (SLAC) and scaphoid nonunion advanced collapse (SNAC) of the wrist are the most common types of wrist arthritis. We compared the union rate and complication profile of patients with SLAC and SNAC wrist undergoing 4 corner arthrodesis with partially threaded or fully threaded headless compression screws.

METHODS

A single-center retrospective review was conducted to identify all patients treated for SLAC and SNAC with 4 corner fusion using headless compression screws from 2016 to 2021. A total of 33 patients undergoing surgery on 35 wrists were identified and included in the study. Demographics, comorbidities, complication profile, and radiographs were collected and compared between groups.

RESULTS

One hundred percent (16/16) of partially threaded and 84.2% (16/19) of fully threaded screws demonstrated union by minimum 10-week follow-up. The total complication rate (avascular necrosis of lunate, screw loosening, etc.) was 31.4%; 52.6% of wrists implanted with fully threaded screws experienced complications compared with a 6.3% complication rate with partially threaded screws. The difference was statistically significant between the 2 groups (P = .004).

CONCLUSIONS

Four corner arthrodesis using antegrade compression screws is an effective, reproducible method to achieve fusion in the wrist. The use of fully threaded screws was associated with more complications than with partially threaded screws, although union rate was not significantly different. Future studies with larger sample sizes would be useful to fully elucidate differences between these 2 constructs.

Lateral Lumbar Interbody Fusion Using Expandable vs Static Titanium Interbody Cages: A Prospective Cohort Study of Clinical and Radiographic Outcomes

BACKGROUND

Expandable cages are a recent development employed to reduce subsidence and improve fusion compared with static cages as they alleviate the need for repeated trialing or overdistraction of the disc space. This study aimed to compare the radiographic and clinical outcomes in patients undergoing lateral lumbar interbody fusion (LLIF) with either an expandable or static titanium cage.

METHODS

This was a prospective study of 98 consecutive patients undergoing LLIF performed over a 2-year period, with the first 50 patients receiving static cages and the following 48 receiving expandable cages. Radiographic evaluation included interbody fusion status, cage subsidence, and change in segmental lordosis and disc height. Clinical evaluation assessed patient-reported outcome measures (PROMs), including the Oswestry Disability Index, visual analog scale (VAS) for back and leg pain, and short form-12 physical and mental health survey scores collected at 3, 6, and 12 months postoperatively.

RESULTS

The 98 patients had 169 cages impacted (84 expandable vs 85 static). Mean age was 69.2 years, and 53.1% were women. There was no significant difference between the 2 groups in terms of age, gender, body mass index, or smoking status. The expandable cage group had higher rates of interbody fusion (94.0% vs 82.9%, P = 0.039) at 12 months as well as significantly reduced implant subsidence rates at all follow-up timepoints (4% vs 18% at 3 months; 4% vs 20% at 6 and 12 months). Patients from the expandable cage group showed a mean 1.9 more points of reduction in VAS back pain (P = 0.006) and 2.49 points greater reduction in VAS leg pain (P = 0.023) at 12-month follow-up.

CONCLUSIONS

Expandable lateral interbody spacers resulted in significantly improved fusion rates with reduced subsidence risks and statistically significant improvement in PROMs up to 12 months postoperatively compared with impacted lateral static cages.

CLINICAL RELEVANCE

The data provide clinical relevance in favoring expandable cages over static cages for enhanced fusion outcomes in lumbar fusions.

LEVEL OF EVIDENCE: 2

Return to Sports and Physical Work after Anatomical and Reverse Shoulder Arthroplasty

BACKGROUND

No consensus has been reached on the return to sports or physical work after shoulder arthroplasty due to a shortage of literature. The purpose of this study was to investigate return to sports or physical work after anatomical total shoulder arthroplasty (aTSA) and reverse shoulder arthroplasty (RSA), as well as the clinical and radiographic outcomes.

METHODS

The inclusion criteria were 1) aTSA or RSA between 2012 and 2017 and 2) patients who preoperatively participated in sports or physical work. The exclusion criteria were 1) revision arthroplasty, 2) fracture/dislocation, 3) fracture sequelae, 4) post-infection, and 5) < 2-year follow-up. Sports and physical work were classified as low-, medium-, or high-load activities. Range of motion (ROM), Constant score, sport or work return, and radiographic findings were evaluated and compared between aTSA and RSA groups.

RESULTS

The subjects who met the criteria were 90 shoulders in 86 patients. The aTSA group consisted of 30 shoulders (10 men and 20 women) with a mean age of 71 ± 8 years (range, 56-85). The RSA group consisted of 60 shoulders (39 men and 21 women) with a mean age of 72 ± 6 years (range, 56-83). Active ROM significantly improved after surgery in all directions in the aTSA group but only in flexion and external rotation in the RSA group. Postoperative external and internal rotations, as well as postoperative Constant scores and satisfaction, were significantly better in the aTSA than in the RSA group. In the aTSA group, the return rate was 93%, and the complete return rate was 70%. In the RSA group, the return rate was 83%, and the complete return rate was 30%. The complete return rate was significantly higher in the aTSA than in the RSA group. Only one aTSA shoulder showed loosening of the glenoid implant, and eight RSA shoulders demonstrated low-grade scapular notching.

CONCLUSION

The return to sports or physical work rates after aTSA and RSA were high; however, the complete return rates were significantly higher in the aTSA group than in the RSA group. No radiographic failures were identified except for one asymptomatic glenoid loosening with a mid-term follow-up.

The impact of cage positioning on lumbar lordosis and disc space restoration following minimally invasive lateral lumbar interbody fusion

OBJECTIVE

The objective of this study was to evaluate patient and surgical factors that predict increased overall lumbar lordosis (LL) and segmental lordosis correction following a minimally invasive lateral lumbar interbody fusion (LLIF) procedure.

METHODS

A retrospective review was conducted of all patients who underwent one- or two-level LLIF. Preoperative, initial postoperative, and 6-month postoperative measurements of LL, segmental lordosis, anterior disc height, and posterior disc height were collected from standing lateral radiographs for each patient. Cage placement was measured utilizing the center point ratio (CPR) on immediate postoperative radiographs. Spearman correlations were used to assess associations between cage lordosis and radiographic parameters. Multivariate linear regression was performed to assess independent predictors of outcomes.

RESULTS

A total of 106 levels in 78 unique patients were included. Most procedures involved fusion of one level (n = 50, 64.1%), most commonly L3-4 (46.2%). Despite no differences in baseline segmental lordosis, patients with anteriorly or centrally placed cages experienced the greatest segmental lordosis correction immediately (mean anterior 4.81° and central 4.46° vs posterior 2.47°, p = 0.0315) and at 6 months postoperatively, and patients with anteriorly placed cages had greater overall lordosis correction postoperatively (mean 6.30°, p = 0.0338). At the 6-month follow-up, patients with anteriorly placed cages experienced the greatest increase in anterior disc height (mean anterior 6.24 mm vs posterior 3.69 mm, p = 0.0122). Cages placed more posteriorly increased the change in posterior disc height postoperatively (mean posterior 4.91 mm vs anterior 1.80 mm, p = 0.0001) and at 6 months (mean posterior 4.18 mm vs anterior 2.06 mm, p = 0.0255). There were no correlations between cage lordotic angle and outcomes. On multivariate regression, anterior cage placement predicted greater 6-month improvement in segmental lordosis, while posterior placement predicted greater 6-month improvement in posterior disc height. Percutaneous screw placement, cage lordotic angle, and cage height did not independently predict any radiographic outcomes.

CONCLUSIONS

LLIF procedures reliably improve LL and increase intervertebral disc space. Anterior cage placement improves the lordosis angle greater than posterior placement, which better corrects sagittal alignment, but there is still a significant improvement in lordosis even with a posteriorly placed cage. Posterior cage placement provides greater restoration in posterior disc space height, maximizing indirect decompression, but even the anteriorly placed cages provided indirect decompression. Cage parameters including cage height, lordosis angle, and material do not impact radiographic improvement.

Long-term clinical and radiographic outcomes of total shoulder arthroplasty in patients under age 60 years

BACKGROUND

We aimed to characterize the long-term clinical and radiographic outcomes of total shoulder arthroplasty (TSA) in patients aged < 60 years. We hypothesized meaningful improvements in shoulder functionality and pain with TSA and an acceptably low rate of prosthesis complications and revisions.

METHODS

This was a retrospective cohort study of 29 patients (34 shoulders) undergoing TSA before age 60 years with a minimum follow-up period of 10 years. Shoulder range of motion, functionality (American Shoulder and Elbow Surgeons and Simple Shoulder Test scores), and pain (visual analog scale score) were evaluated. Radiographs were assessed for lateral humeral offset, the acromiohumeral interval, and glenoid loosening.

RESULTS

The mean age of the patients was 54.4 ± 5.5 years (range, 35.5-59.8 years), with a mean follow-up period of 16.1 ± 4.5 years (range, 10.0-26.1 years). In patients aged < 60 years, TSA significantly improved forward elevation (from 119° ± 26° to 146° ± 21°, P = .0002), external rotation (from 21° ± 25° to 52° ± 15°, P = .0001), and internal rotation (from L5 to L1, P = .002). Additionally, TSA significantly increased American Shoulder and Elbow Surgeons scores (from 32 ± 20 to 64 ± 27, P = .0008) and Simple Shoulder Test scores (from 3 ± 2 to 7 ± 4, P = .0004) and reduced visual analog scale pain scores (from 7 ± 3 to 3 ± 3, P = .0001). Radiographically, there was no significant difference in mean lateral humeral offset (13 ± 6 mm vs. 10 ± 12 mm, P = .472) or the mean acromiohumeral interval (20 ± 4.2 mm vs. 16 ± 6 mm, P = .061) between immediate postoperative and final follow-up radiographs. Radiographic evidence of glenoid loosening was noted in 2 patients. Complications occurred in 6 patients (17.6%), all of which were cases of aseptic glenoid loosening. Ultimately, 4 patients underwent conversion to a reverse TSA and 2 underwent arthroscopic glenoid removal. The rate of prosthesis survivorship was 97.1% (95% confidence interval [CI], 91.4%-100%) at 10 years, 85.4% (95% CI, 73.7%-97.2%) at 15 years, and 80.1% (95% CI, 65.1%-98.4%) at 20 years.

DISCUSSION

TSA consistently improved shoulder functionality and reduced pain while limiting the need for further revisions. These findings suggest that TSA is a viable treatment option for glenohumeral arthritis in younger patients.

Nonoperative treatment of acromial fractures following reverse shoulder arthroplasty: clinical and radiographic outcomes

BACKGROUND

Acromion/scapular spine fractures (ASFs) remain a challenging complication following reverse shoulder arthroplasty (RSA). Historically, nonoperative management has been the treatment of choice, with variable results. The purpose of this study is to report on both clinical and radiographic outcomes of nonoperative treatment. A new subclassification of Levy type II acromion fractures will be proposed, and outcomes will be evaluated in relation to the modified Levy classification.

METHODS

Forty-four patients diagnosed with ASF following RSA were matched 1:3 to a control group based on gender, age, and preoperative function. All ASF patients were treated nonoperatively. Patient-reported outcome measures, consisting of American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, Simple Shoulder Test, Single Assessment Numerical Evaluation, visual analog scale pain and function scores, satisfaction, and active range of motion were gathered preoperatively and at the most recent follow-up. Outcomes were stratified based on fracture type. Radiographic findings including fracture union, scapular rotation, progressive notching, and osteolysis were reviewed from latest follow-up and compared with initial postoperative films.

RESULTS

ASFs were identified at a median of 2 months following RSA (8 type I; 22 type II; 14 type III), followed for a median of 37 months and compared to 108 matched controls. Patients with ASF had inferior clinical outcomes with a higher rate of dissatisfaction (27.8%) when compared to controls. Lateral fracture subtypes (I and IIA) were similar to controls and had little impact on outcomes. However, medial fracture subtypes (type IIB, IIC, and III) demonstrated inferior outcomes when compared to controls, with type III fracture patients demonstrating no improvement from baseline. The overall nonunion rate was 61.4%, with high rates of scapular rotation and osteolysis in medial fracture subtypes. Nonunion was associated with a higher incidence of secondary radiographic findings, including scapular rotation, progressive notching, and osteolysis.

CONCLUSION

Results of nonoperative treatment of ASF following RSA differs based on fracture location. Fractures that occur at or medial to the glenoid face (IIB, IIC, III) demonstrate high rates of unsatisfactory results and worse clinical outcomes. Concerning radiographic findings of scapular tilt, progressive scapular notching and osteolysis were seen at a higher rate with medial fracture types and fracture nonunions.

Preoperative Radiographic Prediction Tool for Early Postoperative Segmental and Lumbar Lordosis Alignment After Transforaminal Lumbar Interbody Fusion

Objective

Transforaminal lumbar interbody fusion (TLIF) is a common approach and results in varying degrees of lordosis correction. The purpose of this study is to determine preoperative radiographic spinopelvic parameters that predict change in postoperative segmental and lumbar lordosis after TLIF.

Materials & Methods

This study is a single surgeon retrospective review of one-level and two-level TLIFs from L3-S1. All patients underwent bilateral facetectomies, 10 mm TLIF cage (non-lordotic) insertions, and bilateral pedicle screw-rod construct placements. Pre- and post-operative X-rays were assessed for preoperative segmental lordosis (SL), lumbar lordosis (LL), and pelvic incidence (PI). Univariate and multi-predictor linear regression analyses were performed to determine the relationships between preoperative radiographic findings and change in early postoperative segmental and lumbar lordosis.

Results

Ninety-seven patients contributing 128 intervertebral segments were examined. The mean change in SL after TLIF was 7.3 (range: 0.10-28.9°, SD 6.39°). The mean change in LL after TLIF was 5.5˚ (range: -14.8-39.2°, standard deviation (SD) 7.16°). Greater preoperative LL predicted less postoperative LL correction, while greater preoperative PI predicted more postoperative SL and LL correction. Greater anterior disk height was noted to be associated with a decreased change in SL (∆SL). An annular tear on preoperative magnetic resonance imaging (MRI) predicted a 2.7° decrease in ∆SL. A Schmorl's node on preoperative MRI predicted a 4.0° decrease in change in LL (∆LL).

Conclusions

A greater preoperative lordosis and a lower spinopelvic mismatch lessen the potential for an increase in the postoperative SL and LL after a TLIF, which is likely due to a ‘ceiling’ effect of an otherwise optimized spinal alignment. A greater anterior disk height and the presence of an annular tear are associated with decreased ∆SL.

What are the major drivers of outcomes in cervical deformity surgery?

Background Context:

Cervical deformity (CD) correction is becoming more challenging and complex. Understanding the factors that drive optimal outcomes has been understudied in CD corrective surgery.

Purpose:

The purpose of the study was to weight baseline (BL) factors on impact upon outcomes following CD surgery.

Study Design Setting:

This was a retrospective review of a single-center database.

Patient Sample:

The sample size of the study was 61 cervical patients.

Outcome Measures:

Two outcomes were measured: “Improved outcome (IO)”: (1) radiographic improvement: “nondeformed” Schwab pelvic tilt (PT)/sagittal vertical axis (SVA) and Ames cervical sagittal vertical axis (cSVA)/T1 Slope – cervical lordosis (TSCL); (2) clinical: MCID Euro-QOL 5 Dimension (EQ5D), Neck Disability Index (NDI), or improvement in modified Japanese Orthopedic Association (mJOA) scale modifier; and (3) complications/reoperation: no reoperation or major complications and “poor outcome” (PO): (1) radiographic deterioration: “moderate” or “severely” deformed Schwab SVA/PT and Ames cSVA/TS-CL; (2) clinical: not meeting MCID EQ5D and NDI worsening in mJOA modifier; and (3) complications/reoperation: reoperation or complications.

Materials and Methods:

CD patients included full BL and 1-year (1Y) radiographic measures and Health related quality of life (HRQLs) questionnaires. Patients who underwent a reoperation for infection were excluded. Patients were categorized by IO, PO, or not. Random forest assessed ratios of predictors for IO and PO. Categorical regression models predicted how BL regional deformity (Ames cSVA, TS-CL, and horizontal gaze), BL global deformity (Schwab PI-LL, SVA, and PT), regional/global change (BL to 1Y), BL disability (mJOA score), and BL pain/function impact outcomes.

Results:

Sixty-one patients were included in the study (55.8 years, 54.1% of females). Surgical approach included 18.3% anterior, 51.7% posterior, and 30% combined. The average number of levels fused for the cohort was 7.7. Mean operative time was 823 min, and estimated blood loss (EBL): 1037ccs. At 1Y, 24.6% had an IO and 9.8% had PO. Random forest analysis showed the top five individual factors associated with an IO: BL maximum kyphosis, maximum lordosis, C0–C2, L4 pelvic angle, and NSR back pain (80% radiographic, 20% clinical). Categorical IO regression model (R² = 0.328, P = 0.007) showed low BL regional deformity (β = ‒0.082), low BL global deformity (β = ‒0.099), global improvement (β = ‒0.532), regional improvement (β = ‒0.230), low BL disability (β = ‒0.100), and low BL NDI (β = ‒0.024). Random forest demonstrated the top five individual BL factors associated with PO, 80% were radiographic: BL CL apex, DJK angle, cervical lordosis, T1 slope, and NSR neck pain. Categorical PO regression model (R² = 0.306, P = 0.012) showed high BL regional deformity (β = ‒0.108), high BL global deformity (β = ‒0.255), global decline (β = ‒0.272), regional decline (β = 0.443), BL disability (β = −‒0.164), BL and severe NDI (>69) (β = ‒0.181).

Conclusions:

Categorical weight demonstrated radiographic as the strongest predictor of both improved (global alignment) and PO (regional deformity/deterioration). Radiographic factors carry the most weight in determining an improved or PO, and can be ultimately utilized in preoperative planning and surgical decision-making to optimize outcomes.

What are the major drivers of outcomes in cervical deformity surgery?

Background Context:

Cervical deformity (CD) correction is becoming more challenging and complex. Understanding the factors that drive optimal outcomes has been understudied in CD correction surgery.

Purpose:

The purpose of this study is to assess the factors associated with improved outcomes (IO) following CD surgery.

Study Design Setting:

Retrospective review of a single-center database.

Patient Sample:

Sixty-one patients with CD.

Outcome Measures:

The primary outcomes measured were radiographic and clinical “IO” or “poor outcome” (PO). Radiographic IO or PO was assessed utilizing Schwab pelvic tilt (PT)/sagittal vertical axis (SVA), and Ames cervical SVA (cSVA)/TS-CL. Clinical IO or PO was assessed using MCID EQ5D, Neck Disability Index (NDI), and/or improvement in Modified Japanese Orthopedic Association Scale (mJOA) modifier. The secondary outcomes assessed were complication and reoperation rates.

Materials and Methods:

CD patients with data available on baseline (BL) and 1-year (1Y) radiographic measures and health-related quality of life s were included in our study. Patients with reoperations for infection were excluded. Patients were categorized by IO, PO, or not. IO was defined as “nondeformed” radiographic measures as well as improved clinical outcomes. PO was defined as “moderate or severe deformed” radiographic measures as well as worsening clinical outcome measures. Random forest assessed ratios of predictors for IO and PO. The categorical regression models were utilized to predict BL regional deformity (Ames cSVA, TS-CL, horizontal gaze), BL global deformity (Schwab PI-LL, SVA, PT), regional/global change (BL to 1Y), BL disability (mJOA score), and BL pain/function impact outcomes.

Results:

Sixty-one patients met inclusion criteria for our study (mean age of 55.8 years with 54.1% female). The most common surgical approaches were as follows: 18.3% anterior, 51.7% posterior, and 30% combined. Average number of levels fused was 7.7. The mean operative time was 823 min and mean estimated blood loss was 1037 ml. At 1 year, 24.6% of patients were found to have an IO and 9.8% to have a PO. Random forest analysis showed the top 5 individual factors associated with an “IO” were: BL Maximum Kyphosis, Maximum Lordosis, C0-C2 Angle, L4-Pelvic Angle, and NSR Back Pain (80% radiographic, 20% clinical). Categorical IO regression model (R² = 0.328, P = 0.007) found following factors to be significant: low BL regional deformity (β = ‒0.082), low BL global deformity (β = ‒0.099), global improve (β = 0.532), regional improve (β = 0.230), low BL disability (β = 0.100), and low BL NDI (β = 0.024). Random forest found the top 5 individual BL factors associated with “PO” (80% were radiographic): BL CL Apex, DJK angle, cervical lordosis, T1 slope, and NSR neck pain. Categorical PO regression model (R² = 0.306, P = 0.012) found following factors to be significant: high BL regional deformity (β = ‒0.108), high BL global deformity (β = ‒0.255), global decline (β = 0.272), regional decline (β = 0.443), BL disability (β = ‒0.164), and BL severe NDI (>69) (β = 0.181).

Conclusions:

The categorical weight demonstrated radiographic as the strongest predictor of both improved (global alignment) and PO (regional deformity/deterioration). Radiographic factors carry the most weight in determining an improved or PO and can be ultimately utilized in preoperative planning and surgical decision-making to optimize the outcomes.

Robotic-arm assisted versus manual total hip arthroplasty: Systematic review and meta-analysis of radiographic accuracy

BACKGROUND

We systematically reviewed the radiological outcomes of studies comparing robotic-assisted (RA-THA) and manual total hip arthroplasty (mTHA).

METHODS

The PubMed, Embase, and Cochrane databases were queried from 1994-2021 for articles comparing radiographic outcomes between RA-THA and mTHA cohorts. A meta-analysis was conducted whenever sufficient data was present for common outcomes.

RESULTS

Our analysis included 20 articles reporting on 4140 patients (RA-THA: n = 1228; mTHA: n = 2912). No differences were demonstrated for acetabular inclination or anteversion. However, RA-THA demonstrated higher rates of cup orientation within the Lewinnek and Callanan safe zones, improved femoral stem alignment, and lower global offset difference (GOD) and limb length discrepancy (all p-values <0.05). Superior femoral canal fill and combined offset were seen among RA-THA patients.

CONCLUSION

Our review found that the use of RA-THA yields superior radiographic outcomes compared to mTHA counterparts. This information can inform healthcare systems considering investing in and implementing these technologies.

Instrumented Four-Level Anterior Cervical Discectomy and Fusion: Long-Term Clinical and Radiographic Outcomes

Background

There is a paucity of data on outcomes following four-level anterior cervical discectomy and fusions (ACDFs), especially the sagittal balance (SB) parameters.

Objective

We aimed to review the long-term clinical and radiographic outcomes for 41 consecutive patients that underwent instrumented four-level ACDF.

Materials and Methods

Records of 27 men and 14 women, aged 40-68 years, who underwent instrumented four-level ACDF and plating at C3-C7 (n = 37) or C4-T1 (n = 4) were retrospectively analyzed. Clinical outcomes that were assessed were the visual analog scale (VAS) for pain, neck disability index (NDI), Odom's criteria, improvement of symptoms, intraoperative and postoperative complications, SB, and need for revision surgery.

Results

The mean follow-up was 65 ± 36.3 months. The mean VAS for arm and neck pain significantly improved from 7.7 ± 1.4 to 3.5 ± 1.7 (P < 0.001). The NDI score significantly improved from 31 ± 8.2 to 19.3 ± 8.1 (P < 0.001). Concerning Odom's criteria, the grades were excellent (14), good (17), fair (9), and poor (1). Concerning intraoperative and postoperative complications, 10 cases developed dysphagia, 3 cases developed temporary dysphonia, 2 cases developed a postoperative hematoma, 1 patient developed C5 palsy, 1 vertebral artery (VA) injury, and 1 case had superficial infection. The average length of stay (LOS) was 2.9 ± 3.7 days. Three patients needed another surgery (one adjacent segment and two posterior foraminotomies). Regarding the mean change in SB parameters, Cobb's angle (CA) (C2-C7) was 14° ± 8.3°, fusion angle (FA) was 10.9 ± 10.9°, cervical straight vertical alignment (cSVA) was 0.6 ± 0.5 cm, T1 slope was 2.3° ± 3.4°, and disc height (DH) was 1.3 ± 0.9 mm.

Conclusion

Instrumented four-level ACDF is safe with a satisfactory outcome and supplementary posterior fusion was not required in any case.

Long-Term Survivorship of Modular Cementless Femoral Stem in Complex Primary Total Hip Arthroplasty: A Concise Minimum 15-Year Follow-Up Report

BACKGROUND

S-ROM hip is a well-established and versatile prosthesis that offers extensive metaphyseal and diaphyseal geometries providing solutions for a variety of surgical scenarios. The aim of this study is to report on long-term survivorship and radiographic outcomes of complex primary total hip arthroplasty (THA) using a modular cementless stem (S-ROM).

METHODS

Retrospective consecutive study was conducted of 167 patients (167 hips): 97 males and 70 females with average age at the time of surgery of 55 years (range 22-76). All patients underwent complex THA by the senior author from 1987 to 1999. Patients were identified using a prospective database. Demographic, clinical, and surgical data were collected from health records. All patients received a cementless acetabular component with a standard polyethylene liner. The primary outcome measure was survivorship beyond 15 years using stem revision for any cause as an end point. Secondary outcome measure was rate of radiographic loosening using Engh classification.

RESULTS

Only 3 patients required stem revision for aseptic loosening and 1 for periprosthetic fracture. Isolated acetabular revision was undertaken in 23 of 167 patients (13.8%) due to polythene wear, osteolysis, and aseptic loosening. Proximal femoral stress shielding (zone 1, 7) was noted in 34 of 167 hips (20.4%). Stable bony ingrowth was noted in 144 hips (86.2%) and the remaining 23 hips had stable fibrous ingrowth (13.8%). Using stem "any-cause revision" as an endpoint, the mean stem survivorship was 31.5 years (95% confidence interval 31.007-31.985) with 30-year estimated survivorship of 97.6%.

CONCLUSION

In a single designer surgeon series, S-ROM stem has stood the test of time with long-term, 30-year survivorship of 97.6% and continues to play an important role in modern hip surgery providing longevity and versatility. However, further comparative long-term studies from independent centers are needed for a definitive conclusion.

LEVEL OF EVIDENCE

IV.

Evaluation of Osseous Incorporation After Osteochondral Allograft Transplantation: Correlation of Computed Tomography Parameters With Patient-Reported Outcomes

BACKGROUND

Studies have reported favorable clinical outcomes after osteochondral allograft (OCA) transplantation to treat osteochondral defects and have demonstrated that healing of the osseous component may be critical to outcomes. However, there is currently no consensus on the optimal modality to evaluate osseous healing.

PURPOSE

To define parameters for OCA healing using computed tomography (CT) and to investigate whether osseous healing identified using CT is correlated with improved pain and function on patient-reported outcomes (PROs) collected closest in time to the postoperative CT scan and at final follow-up.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

Of 118 patients who underwent OCA transplantation for articular cartilage defects of the knee over the 10-year study period, 60 were included in final analysis based on completion of CT scans at 5.8 ± 1.9 months postoperatively and PROs collected preoperatively and postoperatively. CT parameters, including osseous incorporation, bone density, subchondral bone congruency, and cystic changes, were summarized for each patient relative to the cohort. Parameters were assessed for inter- and intrarater reliability as well as for covariation with patient characteristics and surgical variables. Structural equation modeling was used to assess correlation of CT parameters with change in PROs from preoperatively to those collected closest in time to CT acquisition and at the final follow-up.

RESULTS

Bone incorporation was the most reliable CT parameter. The summarized scores for CT scans were normally distributed across the study population. Variance in CT parameters was independent of age, sex, body mass index, prior surgery, number of grafts, lesion size, and location. No significant correlation (P > .12 across all comparisons) was identified for any combination of CT parameter and change in PROs from baseline for outcomes collected either closest to CT acquisition or at the final follow-up (mean, 38.2 ± 19.9 months; range, 11.6-84.9 months). There was a uniformly positive association between change in PROs and host bone density but not graft bone density, independent of patient characteristics and surgical factors.

CONCLUSION

CT parameters were independent of clinical or patient variables within the study population, and osseous incorporation was the most reliable CT parameter. Metrics collected from a single postoperative CT scan was not correlated with clinical outcomes at ≥6-month longitudinal follow-up.

Does preoperative diagnosis impact patient outcomes following reverse total shoulder arthroplasty? A systematic review

BACKGROUND

The indications for reverse total shoulder arthroplasty (rTSA) have expanded to include the treatment of a wide variety of shoulder pathologies, and there may be significant differences in patient outcomes based on preoperative diagnosis.

METHODS

A systematic review of the orthopedic literature contained in the PubMed, Cochrane, and Embase databases was performed on November 14, 2019. Studies investigating rTSA indicated for 7 distinct preoperative diagnoses (massive rotator cuff tear [MCT] without glenohumeral osteoarthritis [GHOA], MCT with GHOA or cuff tear arthropathy, primary GHOA, inflammatory arthritis with MCT, failed shoulder arthroplasty, proximal humeral fracture [PHF], and sequelae following PHF) were included. The main outcomes of interest included functional outcomes (abduction, external rotation, and forward flexion) and patient-reported outcome measures (American Shoulder and Elbow Surgeons shoulder score and Constant-Murley score). Because of significant variation in measurement and reporting, data on internal rotation were not extracted. In addition, radiographic outcomes and complication rates were extracted and recorded for each of the included studies.

RESULTS

In total, 47 studies, comprising 2280 patients, met the inclusion criteria. Significant improvements in functional outcomes and patient-reported outcome measures were found across the preoperative diagnostic groups. There were no significant differences between the diagnostic groups regarding improvement between preoperative and postoperative values for the outcomes of interest, with the exception that the inflammatory arthropathy group had significantly less improvement in the Constant-Murley score than the primary GHOA and revision arthroplasty groups. Although there were few differences in improvement between groups, there were significant differences regarding the level of postoperative functional performance, which was not as consistent in the context of trauma or revision operations (ie, complex PHF, fracture sequela, and revision arthroplasty groups).

CONCLUSION

Reverse total shoulder arthroplasty can provide reliable improvement in clinical outcomes regardless of preoperative diagnosis, with few differences across diagnostic groups regarding preoperative to postoperative improvement. The groups with primary GHOA and MCTs with or without GHOA demonstrated the most reliable postoperative functional outcomes of the examined diagnostic groups. Postoperative outcomes were not as consistent in the context of trauma or revision operations, and these groups may benefit from a variety of modern advancements in rTSA, although further research into these modalities for these groups is needed. Finally, rTSA remains an important treatment option in the context of rheumatoid arthritis, with similar outcomes and complication rates compared with the 6 other operative indications.

Assessing the Relationship Between Bone Density and Loss of Reduction in Nonsurgical Distal Radius Fracture Treatment

PURPOSE

Whether low bone mineral density affects loss of reduction for distal radius fractures (DRFs) managed without surgery is unknown. Our purpose was to understand how bone mineral density, based on second metacarpal cortical percentage (2MCP) measurement, affects DRF healing after nonsurgical treatment.

METHODS

We retrospectively reviewed 304 patients from 2 health systems with DRFs treated without surgery. The AO classification, 2MCP (<50% indicating osteoporosis), and fracture stability based on Lafontaine criteria were determined from prereduction radiographs. Radial inclination, radial height, volar tilt, ulnar variance, and intra-articular stepoff were measured on initial and 6-week final follow-up radiographs and compared. Bivariate analysis was used to evaluate the association between Lafontaine criteria or 2MCP and changes in radiographic parameters. Radiographic parameters with significant associations in bivariate analysis were evaluated in multivariable models adjusted for age, sex, initial radiographic parameters, reduction status, and AO fracture type.

RESULTS

Across all patients, after 6 weeks of nonsurgical treatment, ulnar variance (shortening of the radius) increased by an average of 1.4 mm. Bivariate analysis showed that lower 2MCP and unstable fractures per Lafontaine criteria were each significantly associated with an increase in ulnar variance (P < .05). In adjusted multivariable models, having both 2MCP less than 50% and an unstable fracture together was associated with an additional 1.2-mm increase in ulnar variance (P < .05).

CONCLUSIONS

A 2MCP in the osteoporosis range and unstable fractures by Lafontaine criteria were each associated with a significant increase in ulnar variance after nonsurgical treatment for DRFs. Patients with unstable fractures and 2MCP less than 50% are likely to have an additional increase of greater than 1 mm in ulnar variance at the end of nonsurgical fracture treatment than patients with similar injuries, but without these features. Using initial radiographs to identify patients with low bone mineral density that may be at risk for more substantial loss of reduction can assist with decision making for managing DRFs.

TYPE OF STUDY/LEVEL OF EVIDENCE

Prognostic IV.

Single Use Instruments for Implanting a Contemporary Total Knee Arthroplasty System Are Accurate, Efficient, and Safe

BACKGROUND

Single use instruments (SUI) is a potential mechanism to improve efficiency and reduce cost in total knee arthroplasty (TKA). New technology requires patient safety and surgical accuracy. A multi-center study of SUI vs reusable mechanical instrumentation (RUI) for a TKA system compared implant placement accuracy and operating room (OR) efficiency.

METHODS

Four surgeons implanted 88 primary TKAs, N = 44 RUI and N = 44 SUI. Accuracy was measured radiographically at 3 months. The primary endpoint was non-inferiority of absolute value of mechanical axis alignment. Radiographic endpoints, OR times, and adverse events were also evaluated.

RESULTS

Seventy-five subjects completed the study (41 SUI/34 RUI). The primary endpoint non-inferiority of SUI vs RUI was met, with no significant difference between SUI and RUI in most radiographic parameters (distal femoral varus-valgus, proximal tibial varus-valgus, tibial slope, or subjects within 3° of target); there was a slight difference in femoral component flexion angle (P = .015). SUI and RUI mean (SD) OR set-up times were 18.8 (10.03) and 26.7 (6.93) (P <.001), and surgical times (first incision to last stitch) were 64.6 (16.95) and 60.5 (19.01) (P = .295), respectively. Differences in OR clean-down and anesthesia were not significant. There were no revisions, and there was no significant difference in the number of reported adverse events.

CONCLUSION

SUI resulted in similar accuracy of implant placement to RUI with decreased OR set-up time and no increase in adverse events. These results support the safety and efficacy of SUI for performing TKA. Further analysis of potential economic and technical advantages is warranted.

Mid-Term Clinical and Radiographic Outcomes of a Long Cementless Monobloc Stem for Revision Total Hip Arthroplasty

BACKGROUND

For the past 2 decades, the authors have been using a long tapered cementless stem made of titanium and fully coated with hydroxyapatite for revision total hip arthroplasty. The purpose of this multicentric study is to assess clinical outcomes, radiographic outcomes, re-revision rates, and survival rates of this revision stem at a minimum 5-year follow-up.

METHODS

The records of a multicentric continuous series of 335 adults undergoing revision total hip arthroplasty using the Corail revision stem (DePuy, Leeds, UK) between 2000 and 2012 were retrospectively reviewed. The Harris Hip Score, Oxford Hip Score, and Engh score were recorded. Survival was assessed using the Kaplan-Meier method and cumulative incidence function.

RESULTS

Seventy-seven patients died with their revision stem in place, 47 could not be contacted, and 22 had stem re-revisions. This left a final cohort of 201 patients, aged 70 ± 12 years at revision surgery, with a body mass index of 26 ± 4. The Kaplan-Meier survival was 93.9% for re-revision of any component for any reason, 96.7% for re-revision of the stem for any reason, and 99.3% for re-revision of the stem for aseptic reasons. At last follow-up, the Harris Hip Score was 84.8 ± 13.1, the Oxford Hip Score was 21.0 ± 7.8, and the Engh score was 16.4 ± 6.7.

CONCLUSION

The long tapered cementless revision stem had excellent clinical and radiographic outcomes at a minimum follow-up of 5 years. The revision stem enabled restoration of bone stock in femurs with pre-revision bone defects, confirming that the hydroxyapatite coating promotes osseointegration, even in femurs with extensive bone loss.

LEVEL OF EVIDENCE

Level IV, retrospective cohort study.

Outcomes of anatomic shoulder arthroplasty performed on B2 vs. A1 type glenoids

BACKGROUND

Glenoid component malpositioning and glenoid component retroversion have been associated with higher rates of radiolucencies, raising concerns about its implications on glenoid loosening and ultimate failure of anatomic total shoulder arthroplasty (TSA). Although there is literature regarding the relative advantages of techniques to address posterior glenoid bone loss, we are not aware of studies comparing outcomes of TSA on these challenging Walch type B2 glenoids vs. more common A1 glenoids. The purpose of this study is to compare outcomes of TSA performed on A1 glenoids and B2 glenoids treated with asymmetric glenoid reaming.

METHODS

We identified 1045 shoulders that had primary TSAs performed for osteoarthritis in a prospective shoulder arthroplasty registry. Two hundred eighty-nine shoulders met inclusion criteria of a preoperative Walch type A1 (178) or B2 (111) glenoid morphology, treatment with TSA, asymmetric reaming in the B2 group, and a minimum of 2-year clinical and radiographic follow-up. Postoperative radiographs were assessed for lucencies, and patient-reported outcome measures were collected at all follow-up visits.

RESULTS

Follow-up averaged 40 ± 15 months for all patients, and more men presented with a B2 glenoid (80 of 111; 72%) compared with A1 (101 of 178; 57%) (P = .009). Age at surgery (P = .166), dominant-sided surgery (P = .281), body mass index (P = .501), smoking (P = .155), preoperative opioid use (P = .154), and diabetes (P = .331) were not significantly different between groups. Both groups had similar Constant Strength scores preoperatively (A1: 4.7 ± 7.1, and B2: 4.3 ± 7.3) but the B2 group improved significantly more at final follow-up (A1: 10.3 ± 6.2 vs. B2: 12.7 ± 6.7, P = .005). The Total Constant score was also significantly better at follow-up in the B2 glenoid group (P = .039). All other Constant subscales, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES), and Single Assessment Numerical Evaluation (SANE) measures showed significant improvement preoperatively to final follow-up (all P <.001) but there were no significant differences between the A1 and B2 glenoid groups (all P > .05). A similar proportion of patients rated their satisfaction as either very satisfied or satisfied between the A1 (160; 90%) and B2 (100; 90%) (P = .613). Lazarus scores were also similar between the A1 and B2 groups (P = .952) as were the rates of humeral radiolucent lines (P = .749) and humeral osteolysis (P = .507).

CONCLUSIONS

Although patients with B2 glenoids may present a more technically challenging anatomic total shoulder arthroplasty, treatment with concurrent asymmetric glenoid reaming produced similar, successful clinical and radiographic early to midterm outcomes for patients undergoing TSA compared with A1 glenoids. Additional follow-up on this cohort will be important to confirm the durability of these early results.

Static Versus Expandable Devices Provide Similar Clinical Outcomes Following Minimally Invasive Transforaminal Lumbar Interbody Fusion

BACKGROUND

Few studies have analyzed differences in radiographic parameters and patient-reported outcomes (PROs) between expandable and static interbody devices in patients undergoing minimally invasive transforaminal lumbar interbody fusion (MIS TLIF).

QUESTIONS/PURPOSES

To evaluate differences in radiographic parameters and PROs following MIS TLIF between static and expandable interbody devices.

METHODS

Patients undergoing primary, single-level MIS TLIF between 2014 and 2017 were retrospectively identified. Radiographic measurements including lumbar lordosis (LL), segmental lordosis (SL), disc height (DH), and foraminal height (FH) were performed on lateral radiographs before and after MIS TLIF with a static or expandable articulating interbody device. Radiographic outcomes and PROs were compared using paired and unpaired Student's t test.

RESULTS

Thirty patients received expandable interbody devices and 30 patients received static interbody devices. The expandable device cohort exhibited significantly greater improvement in DH and FH at final follow-up compared with those receiving a static device. Both device cohorts experienced significant improvements in PROs at 6 months post-operatively.

CONCLUSION

MIS TLIF with an expandable interbody device led to a greater increase of DH and FH than with a static interbody device. Patients undergoing MIS TLIF can expect similar improvements in PROs whether receiving a static or an expandable interbody device. Further studies are required to better understand improvements in clinical outcomes afforded by expandable interbody devices.

Long-term outcomes of corrective osteotomy for malunited fractures of the distal radius

The aim was to investigate the long-term outcome after corrective osteotomy for malunion of distal radius fractures. Radiological findings, function, activity performance, pain, health-related quality of life and self-efficacy were studied. Evaluation of 37 patients 3-10 years after osteotomy fixated with a volar plate. Conventional radiographs were taken. Grip strength and range of motion were evaluated. Scores from the Patient Rated Wrist Evaluation (PRWE) were compared with normative values. The RAND-36 was used for evaluation of health-related quality of life and the General Self-Efficacy scale (S-GSE) for self-efficacy. Radial height, volar tilt, and ulnar variance improved postoperatively. In the long term, the corrections were maintained. Radiographs showed significantly more advanced osteoarthritis. Mean grip strength was 31 kg (SD 13) 89%, and range of motion varied between 80% and 95% compared to the uninjured side. The median PRWE was 12 points (0-99). The study group experienced higher levels of pain than reference values. There was a moderate correlation between the PRWE and volar tilt (rs = 0.453, p = .006) and grip strength (rs = 0.40, p = .014). At long-term follow-up functional outcome after a corrective osteotomy is generally good, but patients may experience some degree of pain. Corrective osteotomy might be considered for patients with a poor functional outcome after a distal radius fracture.

Does It Matter: Total Hip Arthroplasty or Lumbar Spinal Fusion First? Preoperative Sagittal Spinopelvic Measurements Guide Patient-Specific Surgical Strategies in Patients Requiring Both

BACKGROUND

In patients requiring both total hip arthroplasty (THA) and lumbar spinal fusion (LSF), consideration of preoperative sagittal spinopelvic measurements can aid in the prediction of postfusion compensatory changes in pelvic tilt (PT) and inform adjustments to traditional THA cup anteversion. This study aims to identify relationships between spinopelvic measurements and post-THA hip instability and to determine if procedure order reveals a difference in hip dislocation rate.

METHODS

Patients at a single practice site who received both THA and LSF between 2005 and 2015 (292: 158 = LSF prior to THA, 134 = THA prior to LSF) were retrospectively reviewed for incidents of THA instability. Those with complete radiograph series (89) had their sagittal (standing) spinopelvic profiles measured preoperatively, immediately postoperatively, and 3 months, 6 months, 1 year, 1.5 years, and 2 years postoperatively. Measured parameters included lumbar lordosis (LL), pelvic incidence (PI), PT, and sacral slope (SS).

RESULTS

No significant differences in dislocation rates between operative order groups were elicited (7/73 LSF first, 4/62 THA first; Z = 0.664, P = .509). Compared to nondislocators, dislocators had lower LL (-10.9) and SS (-7.8), and higher PT (+4.3) and PI-LL (+7.3). Additional risk factors for dislocation included sacral fusion (relative risk [RR] = 3.0) and revision fusion (RR = 2.7) . Predictive power of the model generated through multiple regression to characterize individual profiles of post-LSF PT compensation based on perioperative measurements was most significant at 1 year (R² = 0.565, F = 0.000456, P = .028) and 2 years (R² = 0.741, F = 0.031, P = .001) postoperatively.

CONCLUSION

In performing THA after LSF, it is theoretically ideal to proceed with THA at a postfusion interval of at least 1 year, beyond which further compensatory PT change is minimal. However, the order of surgical procedure revealed no statistical difference in hip instability rates. In cases characterized by large PI-LL mismatch (larger or less predictable compensation profiles) or large SS or LL loss (considerably atypical muscle recruitment), consideration of full functional anteversion range between sitting and standing positions to account for abnormalities not appreciated with standing radiographic assessment alone may be warranted.

Midterm results of anatomic total shoulder arthroplasty with a third-generation implant

BACKGROUND

Anatomic total shoulder arthroplasty (TSA) provides reliable, reproducible, and durable results; however, outcomes of many modern TSA systems are lacking. The present study reports early to midterm results of a third-generation TSA system using a traditional-length press-fit humeral stem and cemented glenoid.

METHODS

A retrospective review was conducted of TSA patients with minimum 2-year clinical follow-up. Patient-reported outcome measures, including Simple Shoulder Test, American Shoulder and Elbow Surgeons Total, visual analog scale for pain, 12-Item Short Form Health Survey, and Single Assessment Numeric Evaluation, as well as measured active motion (forward elevation, external and internal rotation), were recorded at preoperative and postoperative intervals. Preoperative midglenoid axial computed tomography scans were used to evaluate eccentric glenoid wear, humeral head subluxation, and glenoid version. Most recent postoperative radiographs were used to evaluate glenoid loosening, humeral loosening, lesser tuberosity union, and medial calcar resorption. Patient satisfaction at final follow-up was reported as excellent, good, satisfied, or unsatisfied.

RESULTS

There were 267 patients who met inclusion criteria, with a mean age of 70.9 years and mean clinical follow-up of 47 months. Average glenoid retroversion was 9.7°, and 27% had eccentric glenoid wear. At final follow-up, measured motion and nearly all patient-reported outcome measures showed significant improvements, with 75.6% of patients rating their satisfaction as excellent. No patient was considered "at risk" for humeral stem loosening. Glenoid radiolucencies were seen in 13.5% of shoulders (7 gross loosening). Five patients were revised to reverse TSA.

CONCLUSION

TSA using a third-generation traditional-length press-fit stem and cemented glenoid provides excellent early to midterm outcomes with low rates of loosening and high rates of excellent satisfaction.

Value comparison of humeral component press-fit and cemented techniques in reverse shoulder arthroplasty

BACKGROUND

Press-fit humeral fixation for reverse shoulder arthroplasty (RSA) has been shown to have loosening rates and outcomes similar to a cemented technique; however, increased value has not been reported. The purpose of this study was to determine whether the press-fit technique could improve the value of RSA using the procedure value index (PVI).

METHODS

Primary RSA patients with complete hospitalization cost data, preoperative and minimum 2-year postoperative Simple Shoulder Test (SST) scores, and postoperative satisfaction were included. The PVI was calculated as improvement in the SST score (in units of minimal clinically important difference) divided by total cost and normalized. Itemized cost data were obtained from hospital financial records and categorized. Radiographic complications, infections, and revisions were noted. Comparisons were made between the press-fit and cemented RSA cohorts.

RESULTS

A total of 176 primary RSA patients (83 cemented and 93 press fit) met the inclusion criteria (mean follow-up period, 44.6 months). Surgical indications (except failed rotator cuff repair), baseline SST scores, and demographic characteristics were similar. The calculated minimal clinically important difference for the SST score was 3.98. The average PVI was significantly greater in the press-fit cohort (1.51 vs 1.03, P < .001), representing a 47% difference. SST score improvement was not significantly different (P = .23). However, total hospitalization costs were significantly lower for the press-fit cohort ($10,048.89 vs $13,601.14; P < .001).

CONCLUSION

Use of a press-fit technique led to a 47% increase in value over a cemented technique. This appeared to be a function of decreased total costs rather than increased outcome scores.

A Comparative Study of Mini-Scarf Versus Standard Scarf Osteotomy for Hallux Valgus Correction

Scarf osteotomy is widely used for hallux valgus treatment. More recently, a trend has begun toward the use of minimally invasive techniques, including the mini-scarf osteotomy, in which the diaphyseal cut is shortened. We compared the mini-scarf and traditional scarf osteotomy to determine whether the mini-scarf osteotomy is as effective as the scarf osteotomy in correcting mild to moderate hallux valgus and improving clinical function. We reviewed the cases of 37 consecutive patients during a 2-year period. A total of 21 (56.8%) patients had undergone scarf osteotomy and 16 (43.2%) had undergone mini-scarf osteotomy. The intermetatarsal, hallux valgus, and distal metatarsal articular angles and medial sesamoid position of the 2 groups were measured at 12 weeks postoperatively. The Manchester Oxford Foot Questionnaire scores and patient satisfaction were recorded at 28 months postoperatively. All radiologic parameters and Manchester Oxford Foot Questionnaire scores had significantly improved in both groups (p < .05 and p < .01 for mini-scarf and scarf, respectively). The medial sesamoid position had improved in all patients, with similar satisfaction between the 2 procedures (p = .43). The results of the present study have shown that the mini-scarf osteotomy for mild to moderate hallux valgus is as effective as the standard approach, with the potential benefit of a smaller scar and less soft tissue disruption.

Müller-Weiss Disease: Three- to Eight-Year Follow-Up Outcomes of Isolated Talonavicular Arthrodesis

Numerous surgical techniques for the treatment of Müller-Weiss disease (MWD) have been reported. However, no extensive clinical and radiographic studies of isolated talonavicular arthrodesis and MWD have been reported. The present retrospective cohort study examined the outcomes of isolated talonavicular arthrodesis at 3 to 8 years of follow-up in 16 MWD patients with a collapsed longitudinal arch and at least Maceira stage III. Demographic data, pre- and postoperative visual analog scale (VAS) scores for pain on walking and walking disability, foot and ankle outcome scores (FAOSs), and radiographic parameters were analyzed, with statistical significance at p < .05. A survival analysis was used to determine the median time to union. The mean ± standard deviation pre- and postoperative VAS scores for pain on walking were 7.69 ± 1.62 and 2.19 ± 1.52 and the walking disability scores were 7.06 ± 2.11 and 2.31 ± 1.92, respectively. The pre- and postoperative FAOSs were 48.07 ± 21.50 and 82.27 ± 13.86 for activities of daily living, 30.86 ± 19.70 and 76.17 ± 22.39 for quality of life, and 20.93 ± 22.89 and 51.88 ± 23.66 for sports/recreation, respectively. The median pre- and postoperative FAOSs for the symptoms subscale were 73.22 (range 42.88 to 100.00) and 87.50 (35.71 to 100.00) and for pain were 34.72 (range 8.33 to 72.22) and 88.89 (54.41 to 100.00), respectively. Significant improvements occurred from preoperatively to postoperatively for VAS scores and FAOSs (p < .05). The mean pre- and postoperative calcaneal pitch angles were 11.31° ± 4.35° and 13.81^o ± 5.60^o, significant improvement (p = .016). Improvement was also seen midfoot abduction, with a mean pre- and postoperative anteroposterior Meary's angle of 14.38° ± 10.07° and 9.38° ± 12.21°. The survival analysis showed union was achieved in all patients, with a median time to union of 2 (95% confidence interval 1.03 to 3.00) months. Our data indicate that talonavicular arthrodesis provides satisfactory functional outcomes for MWD patients with a collapsed longitudinal arch.

Five-year minimum clinical and radiographic outcomes of total shoulder arthroplasty using a hybrid glenoid component with a central porous titanium post

BACKGROUND

To determine the effectiveness of hybrid glenoid components in reducing the frequency of glenoid component loosening, we evaluated clinical and radiographic outcomes at a minimum 5-year follow-up in 45 shoulders that underwent total shoulder arthroplasty (TSA) using a system with a central porous titanium post to augment the cemented peripheral pegs.

METHODS

Function and pain were evaluated with the American Shoulder and Elbow Surgeons Standardized Shoulder Assessment score, visual analog scale, active shoulder range of motion, and strength. Postoperative radiographs were analyzed for radiolucent lines, progressive loosening, and at-risk signs.

RESULTS

The mean American Shoulder and Elbow Surgeons score improved from 40.4 to 83.7 (P < .0001) and the mean visual analog scale from 5.9 to 0.8 (P < .0001). Forward elevation improved from 113° to 151° (P < .001), internal rotation from 49° to 60° (P = .035), and mean external rotation from 36° to 50° (P = .0006). Radiographs showed glenoid component radiolucency in 29 shoulders. Radiolucencies were confined to the area under the glenoid faceplate in 6 and were only around the central post in 13. Nine TSAs (20%) demonstrated 2 or more columns of involvement but were not judged to be at-risk. One implant (2.2%) had glenoid component failure and was revised to a hemiarthroplasty.

CONCLUSION

Anatomic TSA using a hybrid glenoid component with a central porous titanium post demonstrated a low rate of mechanical failure and a rate of radiolucent lines comparable to reports of all polyethylene implants. Further evaluations are needed to demonstrate the long-term durability of these implants and to determine the significance and fate of the radiolucent lines, particularly relative to the central post.

Glenosphere size in reverse shoulder arthroplasty: is larger better for external rotation and abduction strength?

BACKGROUND

The role of glenosphere size in reverse shoulder arthroplasty (RSA) may be important in prosthetic stability, joint kinematics, rotator cuff tension and excursion, scapular impingement, humeral lateralization, deltoid wrap, and the occurrence of "notching." This study compared short- and midterm clinical and radiographic outcomes for 2 different glenosphere sizes of a single RSA type with respect to implant positioning, glenoid size, and morphology.

METHODS

This retrospective analysis included 68 RSA procedures that were prospectively documented in a local register during a 5-year postoperative period. Two glenosphere diameter sizes of 36 mm (n = 33) and 44 mm (n = 35) were used. Standard radiographs were made preoperatively (ie, baseline) and at 6, 12, 24, and 60 months after surgery. Range of motion, strength, the Constant-Murley score, and the Shoulder Pain and Disability Index were also assessed at all follow-up visits. The effect of glenosphere size on measured outcomes was adjusted for baseline values, patient gender, and humeral head diameter.

RESULTS

No significant differences were found in the functional scores between treatment groups at all follow-up assessments. At the 12-month follow-up, patients with a 44-mm glenosphere had greater external rotation in adduction (mean difference, 12°; P = .001) and abduction strength (mean difference, 1.4 kg; P = .026) compared with those with the smaller implant. These differences remained at 60 months. Scapular notching was observed in 38% of all patients, without any relevant difference between the groups.

CONCLUSION

An increase in glenosphere diameter leads to a clinically moderate but significant increase in external rotation in adduction and abduction strength at midterm follow-up.

The Morscher Press-Fit Acetabular Component: An Independent Long-Term Review at 18-22 Years

BACKGROUND

There are relatively few 20-year results of uncemented acetabular components, and most of these are modular designs. This study reports the 20-year results of a monoblock press-fit acetabular component.

METHODS

A total of 122 total hip arthroplasties (111 patients) using the Morscher cup were reviewed at a mean of 19.7 years. The average age at implantation was 57.3 years (range, 36-74 years), and 81 (66%) were men.

RESULTS

Twenty-two patients (25 hips) had died. Seven hips were revised, including 5 acetabular revisions. Six patients (6 hips) declined to participate but were known not to have been revised. The mean Oxford hip score was 41.1 (range, 22-48), and the mean reduced Western Ontario and McMaster Universities Osteoarthritis Index score was 5.7/48 (range, 0-24). Eccentric wear was seen in 13 (15.7%) and major osteolysis in 14 (17%) of 82 surviving hips with radiographs. The all-cause revision rate was 0.32 per 100 observed component years (95% confidence interval [CI], 0.13-0.66). The 20-year Kaplan-Meier survival was 93.4% (CI, 86.6-96.8) for all-cause revisions, 95.5% (CI, 89.4-98.1) for any acetabular revision, and 97.1% (CI, 91.2-99.1) for acetabular aseptic loosening, wear, or osteolysis.

CONCLUSION

The Morscher acetabular component has continued to perform well at 20 years despite using conventional polyethylene with results that match or surpass other cementless acetabulae.

A Comparison of Radiographic Outcomes After Total Hip Arthroplasty Between the Posterior Approach and Direct Anterior Approach With Intraoperative Fluoroscopy

BACKGROUND

Radiographic outcomes after total hip arthroplasty (THA) have been linked to clinical outcomes. The direct anterior approach (DAA) for THA has been criticized by some for providing limited exposure and compromised implant position but allows for routine use of intraoperative fluoroscopy. We sought to determine whether radiographic measurements differed by THA approach using prospective cohorts.

METHODS

Two reviewers blinded to surgical approach examined 194 radiographs, obtained 4-6 weeks after primary THA, and obtained measurements for acetabular inclination angle, acetabular anteversion, radiographic limb length discrepancy (LLD), and femoral offset. All surgeries were performed at a tertiary academic medical center in rural New England by an experienced fellowship-trained arthroplasty surgeon. Measurements for inclination angle, anteversion, LLD, and offset were made into binary yes/no responses based on whether the mean measurement (between the 2 reviewers) was acceptable or not based on established criteria. Multivariate logistic regression analyses were performed using preoperative and intraoperative characteristics to identify predictors of acceptability for each measurement.

RESULTS

The DAA group had higher rates of acceptable acetabular angle (96 vs 85%, P = .005) and was protective against an unacceptable angle in an adjusted predictive model (odds ratios 0.16, P = .005). There were no significant differences between approaches for acceptable anteversion, LLD, or offset. Body mass index of 30-34 was associated with higher odds of unacceptable inclination angle compared to the nonobese group (adjusted odds ratio, 6.82, P = .013).

CONCLUSION

DAA for THA was associated with lower odds of unacceptable inclination angle compared to the posterior approach, with no differences in anteversion, LLD, or offset.

Anterior cervical discectomy and fusion versus anterior cervical corpectomy and fusion in multilevel cervical spondylotic myelopathy: A meta-analysis

BACKGROUND

Both anterior cervical discectomy and fusion (ACDF) and anterior cervical corpectomy and fusion (ACCF) are used to treat multilevel cervical spondylotic myelopathy (mCSM); however, which one is better treatment for mCSM remains considerable controversy. A meta-analysis was performed to compare clinical outcomes, radiographic outcomes, and surgical outcomes between ACDF and ACCF in treatment for mCSM.

METHODS

An extensive search of literature was performed in Pubmed/MEDLINE, Embase, the Cochrane library, CNKI, and WANFANG databases on ACDF versus ACCF treatment for mCSM from January 2011 to August 2016. The following variables were extracted: length of hospital stay, blood loss, operation time, Japanese Orthopedic Association (JOA) scores, Neck Disability Index (NDI) score, fusion rate, Cobb angles of C2 to C7, dysphagia, hoarseness, C5 palsy, infection, cerebral fluid leakage, donor site pain, epidural hematoma, graft subsidence, graft dislodgment, pseudoarthrosis, and total complications. Data analysis was conducted with RevMan 5.3 and STATA 12.0.

RESULTS

A total of 8 studies containing 878 patients were included in our study. The results showed that ACDF is better than ACCF in the angle of C2 to C7 at the final follow-up (P < 0.00001, standardized mean difference = 4.76 [3.48, 6.03]; heterogeneity: P = 0.17, I = 43%), C5 plasy (P = 0.02, odds ratio [OR] 0.42, 95% confidence interval [CI] 0.21, 0.86; heterogeneity: P = 0.52, I = 0%), blood loss (P < 0.00001, standardized mean difference = -53.12, 95% CI -64.61, -41.64; heterogeneity: P = 0.29, I = 20%), fusion rate (P = 0.04, OR 2.54, 95% CI 1.05, 6.11; heterogeneity: P = 0.29, I = 20%), graft subsidence (P = 0.004, OR 0.11, 95% CI 0.02, 0.48; heterogeneity: P = 0.94, I = 0%), and total complications (P = 0.0009, OR 0.56, 95% CI 0.40, 0.79; heterogeneity: P = 0.29, I = 18%).However, there are no significant differences in length of hospital stay, operation time, JOA scores, NDI scores, preoperative angle of C2 to C7, dysphagia, hoarseness, infection, cerebral fluid leakage, donor site pain, epidural hematoma, graft dislodgment, and pseudoarthrosis (all P > 0.05).

CONCLUSIONS

Based on our meta-analysis, our results suggest that both ACDF and ACCF are good plans in clinical outcomes; however, ACDF is a better choice in radiographic outcomes and total complications for the treatment of multilevel CSM.

Outcomes of Custom Flange Acetabular Components in Revision Total Hip Arthroplasty and Predictors of Failure

BACKGROUND

Custom triflange acetabular components (CTAC) have become more popular in the treatment of Paprosky type IIIB defects with an average survivorship of 80% at 4 years. Many studies report survivorship of CTAC, but radiographic parameters of CTAC success or failure have not been previously reported. The purpose of the study was to assess radiographic and patient factors predictive of failure in CTAC.

METHODS

A retrospective review of 63 patients with >24 months of follow-up was completed. Continuous and categorical variables were compared between failed vs successful CTAC using Wilcoxon rank-sum test and Fisher exact test, respectively.

RESULTS

The failure rate of the CTAC was 13.5% over an average follow-up of 4.32 years (±2.94). Patients had a mean of 2 revisions (range, 0-11) before CTAC implantation. Compared with the contralateral hip center of rotation, the failed CTAC group tended to lateralize the hip center by a mean of 18.29 mm (±11.90 mm) compared to a mean of 9.86 mm (±11.89) in the intact group, although this did not reach statistical significance (P = .1029). The Western Ontario and McMaster Universities Osteoarthritis Index function score improved from 38.94 (±14.23) to 71.35 (±21.96) at most recent follow-up (P = .0002). The Western Ontario and MacMaster Universities Osteoarthritis Index scores were not significantly different between intact and failed CTAC groups.

CONCLUSIONS

CTAC tends to lateralize the hip center by approximately 1 cm, and there is a trend toward nearly 2 cm of lateralization in the small subset of failed CTAC. Future efforts should focus on medializing the hip center in CTAC to improve ingrowth and survivorship.

Effect of Obesity on Clinical and Radiographic Outcomes Following Reconstruction of Stage II Adult Acquired Flatfoot Deformity

BACKGROUND

Obesity is a known risk factor for the development of adult acquired flatfoot deformity (AAFD), but obesity's effects on outcomes following AAFD reconstruction are unknown. We hypothesized that obesity would negatively impact outcomes following joint-preserving stage II AAFD reconstruction.

METHODS

This retrospective study compared the outcomes of normal-weight (18.5 kg/m(2) ≤ BMI < 25 kg/m(2)), overweight (25 kg/m(2) ≤ BMI < 30 kg/m(2)), and obese (BMI ≥ 30 kg/m(2)) patients after AAFD reconstruction. Clinical outcome measures included the Foot and Ankle Outcome Score (FAOS), Short-Form 12 (SF-12), and Numeric Rating Scale of Pain (NRS Pain) administered preoperatively and at least 1 year postoperatively. Anteroposterior and lateral radiographs were taken preoperatively and at least 6 months postoperatively. Pre- to postoperative changes in outcome measures were assessed within BMI classes. Preoperative, postoperative, and pre- to postoperative changes in outcomes were compared among BMI classes. There were 41 normal-weight patients, 39 overweight patients, and 44 obese patients with a mean age of 56 years, FAOS follow-up of 2.9 years, and radiographic follow-up of 2.1 years. Demographics and reconstructive procedures were comparable among the 3 BMI classes.

RESULTS

All outcomes significantly increased pre- to postoperatively in the 3 groups with the exception of the FAOS Symptoms subscale for normal-weight patients (P = .340) and SF-12 Mental Component score for all 3 BMI classes (P > .999). Preoperatively, obese patients had more symptoms than normal-weight patients, scoring 12 points lower on the FAOS Symptoms subscore (P = .008). Obese patients also scored 11 points lower preoperatively on the SF-12 Overall score (P = .028) and had 31% greater pain than normal-weight patients (P = .003). There were no differences among the 3 BMI classes in any postoperative outcomes assessed.

CONCLUSION

Although obese patients had significantly worse symptoms, overall health, and NRS pain scores preoperatively, the short-term clinical and radiographic outcomes of stage II AAFD reconstruction were similar for normal-weight, overweight, and obese patients. We suggest that joint-preserving reconstruction remains a viable alternative to fusion of the triple joint complex for the treatment of overweight and obese stage II AAFD patients.

LEVEL OF EVIDENCE

Level III, retrospective cohort study.

Long-Term Clinical Outcomes and Survivorship of Revision Total Knee Arthroplasty with Use of a Constrained Condylar Knee Prosthesis

The purpose of this study was to determine long-term clinical and radiographic results. One hundred and ninety-four patients (228 knees) underwent revision TKA with use of a constrained condylar knee prosthesis. The mean duration of follow-up was 14.6 years (range, 11 to 16 years). The mean pre-revision Knee Society knee scores (43.5 points) and function scores (47.0 points), and Western Ontario and McMaster Universities Osteoarthritis index scores (88 points) were improved significantly (P=0.002) to 85.6, 68.5, and 25 points, respectively, at 14.6 years follow-up. Eighteen knees (8%) had re-revision. Four knees were re-revised for infection. Kaplan-Meier survivorship analysis revealed that the 16-year rate of survival of the components was 94.7% as the end point of loosening and 92% as the end point of revision.

Supercapsular percutaneously-assisted total hip arthroplasty: radiographic outcomes and surgical technique

BACKGROUND

The supercapsular percutaneously-assisted total hip (SuperPATH(®)) approach for total hip arthroplasty (THA) was developed to promote early mobilization and greater range of motion, physiologic gait kinematics and improved pain control. The superpath approach is a hybrid of the Superior Capsulotomy (SuperCap(®)) approach and the percutaneously assisted total hip (PATH(®)) technique.

METHODS

Postoperative radiographs of 66 consecutive patients from the first 100 patients who underwent the SuperPATH approach were analysed by an independent third party for component position and seating, femoral offset and leg length. A detailed description of preoperative and postoperative preparation, soft tissue dissection, preparation of the femoral canal and acetabulum, and implant positioning is also provided with figures to illustrate.

RESULTS

All components in this case series were well seated and position deemed optimal. Leg lengths were measured to within 5 mm of the contralateral side and mean acetabular abduction angle was 40.13° (SD 6.30°).

CONCLUSIONS

Through preservation of the external rotators, hip capsule, and abductor integrity, the SuperPATH approach for THA maximally preserves the surrounding soft tissue envelope. Implant position was optimal within the 'learning curve' of the first 100 cases for described THA safe zones. Long term outcome data for the SuperPATH approach are being collected as part of an ongoing study to compare to favourable short and mid-term results.

Two-year radiographic and clinical outcomes from the Canadian Methotrexate and Etanercept Outcome study in patients with rheumatoid arthritis

Objective. To evaluate radiographic and clinical outcomes up to 24 months in patients with RA enrolled in the Canadian Methotrexate and Etanercept Outcome study.

Methods. In this open-label non-inferiority trial, patients with inadequate response to MTX received etanercept plus MTX for 6 months and then were randomized to either etanercept monotherapy or continued etanercept plus MTX until 24 months. Radiographic data were analysed using the modified total Sharp score (mTSS), joint space narrowing and erosion scores. Secondary outcomes included the 28-joint DAS with ESR (DAS28-ESR), Simplified Disease Activity Index, Clinical Disease Activity Index, HAQ Disability Index (HAQ-DI) and safety.

Results. Two hundred five of 258 patients enrolled were randomized (98 etanercept, 107 etanercept plus MTX). At month 24, the mean increase from baseline to month 24 for the etanercept and etanercept plus MTX arms, respectively, for the mTSS were 0.4 (s.d. 1.9) and 0.0 (s.d. 1.4); for joint space narrowing, 0.1 (s.d. 0.6) and 0.0 (s.d. 0.7) and for erosion, 0.3 (s.d. 1.5) and 0.0 (s.d. 1.0). At month 24, the mean increase from month 6 mean scores/count increases for DAS28-ESR were 0.56 (s.d. 1.26) and 0.08 (s.d. 1.50); for Simplified Disease Activity Index, 4.7 (s.d. 13.1) and 0.9 (s.d. 12.5); for Clinical Disease Activity Index, 4.1 (s.d. 12.3) and 1.0 (s.d. 12.3) and for HAQ-DI, 0.20 (s.d. 0.45) and 0.02 (s.d. 0.54). Patients with DAS28-ESR low disease activity (LDA)/remission at month 6 had numerically better outcomes at month 24 than patients with moderate to high disease activity at month 6. In patients with LDA/remission at month 6, outcomes were similar at month 24 between etanercept monotherapy and etanercept plus MTX, whereas patients with moderate to high disease activity at month 6 had numerically better outcomes with etanercept plus MTX than etanercept at month 24. There were no new safety signals and serious adverse events were not different between groups.

Conclusion. These results support the possibility of discontinuing MTX in patients who have tolerability issues with MTX if they achieve LDA/remission.

Trial registration: ClinicalTrials.gov (https://clinicaltrials.gov/; NCT00654368).

Clinical and radiographic outcomes of traumatized immature permanent necrotic teeth after revascularization/revitalization therapy

INTRODUCTION

Revascularization treatment is rapidly becoming an accepted treatment alternative for the management of endodontic pathology in immature permanent teeth with necrotic dental pulps. However, the success and timing of clinical resolution of symptoms, and radiographic outcomes of interest, such as continued hard tissue deposition within the root, are largely unknown.

METHODS

In this prospective cohort study, 20 teeth were treated with a standardized revascularization treatment protocol and monitored for clinical and radiographic changes for 1 year. Standardized radiographs were collected at regular intervals, and radiographic changes were quantified.

RESULTS

All 20 treated teeth survived during the 12-month follow-up period, and all 20 also met the clinical criteria for success at 12 months. As a group, the treated teeth showed a statistically significant increase in radiographic root width and length and a decrease in apical diameter, although the changes in many cases were quite small (such that the clinical significance is unclear). The within-case percent change in apical diameter after 3 months was 16% and had increased to 79% by 12 months, with 55% (11/20) showing complete apical closure. The within-case percent change in root length averaged less than 1% at 3 months and increased to 5% at 12 months. The within-case percent change in root thickness averaged 3% at 3 months and 21% at 12 months.

CONCLUSIONS

Although clinical success was highly predictable with this procedure, clinically meaningful radiographic root thickening and lengthening are less predictable after 1-year of follow-up. Apical closure is the most consistent radiographic finding.

Radiographic and clinical outcomes of the treatment of immature permanent teeth by revascularization or apexification: a pilot retrospective cohort study

INTRODUCTION

This retrospective cohort study compared clinical and radiographic outcomes of endodontic treatment performed in immature nonvital permanent teeth by apexification (calcium hydroxide or apical barrier with mineral trioxide aggregate) versus revascularization.

METHODS

A comprehensive chart review was performed to obtain a cohort of previously completed cases with recalls. Clinical and radiographic data were collected for 31 treated teeth (19 revascularization and 12 apexification) with an average follow-up time of 17 months and a recall rate of 63%. Tooth survival, success rate, and adverse events were analyzed. Changes in radiographic root length, width, and area were quantified.

RESULTS

The majority of treated teeth survived throughout the study period, with 30 of 31 (97%) teeth surviving (18/19 [95%] revascularization and 12/12 apexification). Most cases were also clinically successful, with 27 of 31 (87%) meeting criteria for success (15/19 [78%] revascularization and 12/12 apexification; nonsignificant difference). A greater incidence of adverse events was observed in the revascularization group (8/19 [42%] vs 1/12 [11%] in apexification) (risk ratio = 5.1; P = .04; 95% confidence interval, 0.719-35.48). Although more revascularization cases than apexification cases showed an increase in radiographic root area and width, the effect was not statistically significant.

CONCLUSIONS

In this study, revascularization was not superior to other apexification techniques in either clinical or radiographic outcomes. Studies with large subject cohorts and long follow-up periods are needed to evaluate outcomes of revascularization and apexification while accounting for important covariants relevant to clinical success.

Corrective distal radius osteotomy following fracture malunion using a fixed-angle volar locking plate

Post-traumatic distal radius deformity may cause severe morbidity, and corrective osteotomy is often necessary to realign the functional axis of the wrist to correct symptomatic malunion. The aim of this retrospective study was to review the short-term results of a single surgeon’s series of distalradius corrective osteotomies following fracture malunion using a fixed-angle volar locking plate for 20 patients(16 women) of an average age of 57 (range 19–83) years [corrected].At short-term follow up (average 14 months, range 12-15 months), no complications were noted and radiological union was confirmed in all cases at an average of 3 months. The average post-operative Disability of the Arm, Shoulder and Hand score was 13.48 (range 0-48.33) and an objective improvement was noted in movements at the wrist joint. A statistically significant improvement was achieved in ulnar variance, radial inclination, dorsal tilt, and supination.

Radiographic fit and fill analysis of a new second-generation proximally coated cementless stem compared to its predicate design

The purpose of this study was to compare in vivo fit and fill analysis of a new second-generation proximally coated cementless stem compared to its predicate design. This prospective trial of 100 total hip arthroplasties compared specific radiographic "Fit and Fill" parameters between the two designs. Fit type was assessed by comparing the type of canal fill. Post-operative fill parameters such as mean stem-to-canal ratios and mean minimum and maximum gaps between the stems to the cortical bone in different sections and areas were compared. A significantly higher proportion of the second-generation stems had Type I fit (82% vs. 54%), had better stem to canal fill ratio in the middle (90.6% vs. 85.3%) and distal sections (88.1% vs. 78.6%) compared to the older design. The new second-generation stem design had a significantly better canal fit and distal canal fill in the medial and lateral portions.

Evaluation of instability factors in distal radius fractures

BACKGROUND

Fractures of distal radius are one of the most common fractures seen by physicians and account for 20% of all fractures seen in the emergency room. Various factors contribute in secondary displacement of fracture fragments after anatomic or near anatomic close reduction and cast immobilization in distal radius fractures. This study was designed to examine the correlation between radiographic outcomes in the closed treatment of unstable distal radius fractures and different risk factors.

MATERIALS AND METHODS

One hundred and fifty-seven patients were included in this prospective study. There were 107 women and 50 men; with a mean age of 51 ± 16.7 years (range: 20-86 years). During the follow-up in all radiographs, the following variables were analyzed as instability factors: (1) Age, (2) gender, (3) radial shortening, (4) dorsal comminution, (5) articular step-off, (6) radial inclination, (7) associated ulna fracture, and (8) dorsal angulation.

RESULTS

Based on the radiographic criteria for an acceptable reduction, 92 patients (58.6%) failed to maintain an acceptable reduction and classified as group I, while in 65 patients (41.4%), the postoperative radiographs were within an acceptable range and classified as group II. The mean age of patients in group I was higher than group II (P < 0.001). Radial shortening of more than 6.5 mm, loss of radial inclination of more than 6.5 degrees, and age above 52 at presentation were the most important predictive factors for instability.

CONCLUSION

Among the variables, the most important predictors of redisplacement after an acceptable closed reduction were loss of radial height, loss of radial inclination, and age.

Early follow-up for a hybrid total hip arthroplasty using a metal-backed acetabular component designed to reduce "backside" polyethylene wear

Modular acetabular systems have several advantages; however, increased polyethylene wear has been recognized as a disadvantage. In our study, an acetabular shell design with a highly polished inner surface, a locking mechanism that minimizes micromotion, and a high polyethylene liner to shell conformity was evaluated. A prospective cohort of 50 consecutive hips was followed up for a mean of 3.6 years (range, 2-7 years). One patient required an early revision for recurrent instability. Mean linear head penetration rates were 0.242 mm/year (range, 0.048-0.655 mm/year). The true linear wear rate was calculated after subtracting the linear wear in the first follow-up year from the total wear at the end of the follow-up. The true linear wear rate was 0.173 mm/year (range, 0.03-0.423 mm/year). A positive correlation was found between wear rate and male gender. The low head penetration rates suggest that a polished liner with an improved locking mechanism and increased liner conformity can reduce polyethylene wear.