Reconstruction of the fully edentulous maxilla using sinus grafts and bone expansion - a retrospective analysis of 50 consecutive cases

A series of fifty cases involving reconstruction of the maxilla to normal contour, comfort, health, function and esthetics is retrospectively analyzed using 25 years of follow-up data.

Differences in acoustic parameters of hammering sounds between successful and unsuccessful initial cementless cup press-fit fixation in total hip arthroplasty

Aims

It is important to analyze objectively the hammering sound in cup press-fit technique in total hip arthroplasty (THA) in order to better understand the change of the sound during impaction. We hypothesized that a specific characteristic would present in a hammering sound with successful fixation. We designed the study to quantitatively investigate the acoustic characteristics during cementless cup impaction in THA.

Methods

In 52 THAs performed between November 2018 and April 2022, the acoustic parameters of the hammering sound of 224 impacts of successful press-fit fixation, and 55 impacts of unsuccessful press-fit fixation, were analyzed. The successful fixation was defined if the following two criteria were met: 1) intraoperatively, the stability of the cup was retained after manual application of the torque test; and 2) at one month postoperatively, the cup showed no translation on radiograph. Each hammering sound was converted to sound pressures in 24 frequency bands by fast Fourier transform analysis. Basic patient characteristics were assessed as potential contributors to the hammering sound.

Results

The median sound pressure (SP) of successful fixation at 0.5 to 1.0 kHz was higher than that of unsuccessful fixation (0.0694 (interquartile range (IQR) 0.04721 to 0.09576) vs 0.05425 (IQR 0.03047 to 0.06803), p < 0.001). The median SP of successful fixation at 3.5 to 4.0 kHz and 4.0 to 4.5 kHz was lower than that of unsuccessful fixation (0.0812 (IQR 0.05631 to 0.01161) vs 0.1233 (IQR 0.0730 to 0.1449), p < 0.001; and 0.0891 (IQR 0.0526 to 0.0891) vs 0.0885 (IQR 0.0716 to 0.1048); p < 0.001, respectively). There was a statistically significant positive relationship between body weight and SP at 0.5 to 1.0 kHz (p < 0.001). Multivariate analyses indicated that the SP at 0.5 to 1.0 kHz and 3.5 to 4.0 kHz was independently associated with the successful fixation.

Conclusion

The frequency bands of 0.5 to 1.0 and 3.5 to 4.0 kHz were the key to distinguish the sound characteristics between successful and unsuccessful press-fit cup fixation.

Early Clinical and Radiographic Outcomes of Total Hip Arthroplasty with DELTA ST-C Cup and MINIMA S Stem

Background and Objectives: The uncemented threaded DELTA ST-C cup was introduced in last few years. It has a hemispheric shell, consisting of Ti6Al4V titanium alloy. The MINIMA S stem was developed according to the principles of proximal-loading and extended metaphyseal geometry applied to a short stem. The purpose of the study was to assess the clinical and radiographic outcomes and the short- and mid-term survivorship of the DELTA ST-C cup and MINIMA S stem in patients undergoing total hip arthroplasty (THA). The present is the first study to report outcomes and implant survivorship of the DELTA ST-C cup coupled with the MINIMA S femoral stem. Materials and Methods: The present study is a retrospective observational cohort study of a prospectively maintained database, evaluating clinical outcomes and implant survivorship in 95 patients undergoing THA with the MINIMA stem coupled with the DELTA ST-C cup with at least a 3-year follow-up. The clinical evaluation was assessed with a change in the Harris hip score (HHS), while the radiographic evaluation included anteroposterior views of the pelvis and lateral views of the affected hip. Results: The enrolled population's mean age was 69.3 years and most patients were female (64%). The MINIMA S standard stem was implanted in 68 patients (72%), the lateralized stem was implanted in 27 (28%), and the mean acetabular inclination was 48.2°. The HHS improved significantly from the preoperative value (median 46, IQR: 38-55), already at 1 month after surgery (median 76, IQR: 66-77), reaching excellent results at 1 year and 3 years postoperatively (median 96, IQR: 91-100). X-rays demonstrated good implant stability and biomechanics parameter restorations revealed no sign of subsidence, and the presence of radiolucent lines greater than 2 mm in the short stem area in five cases and in the acetabulum in one were not clinically significant. No revisions have been performed so far. Conclusions: The MINIMA S stem coupled with the DELTA ST-C cup demonstrated very good clinical and radiological results with a significant increase of the Harris hip score at short- and mid-term follow-up. This is the first study evaluating the DELTA ST-C cup, showing promising outcomes during the study's follow-up. The MINIMA S stem has been evaluated in a very few studies. However, the combination with this particular cup had not yet been studied. The design of the stem and the cup ensures primary stability and excellent early term outcomes, moreover the study demonstrates extraordinary implant survivorship, equal to 100%.

Short-term evaluation of humeral stress shielding following reverse shoulder arthroplasty using press-fit fixation compared with cemented fixation

BACKGROUND

The purpose of this study was to compare the functional outcomes and humeral stress shielding of a reverse shoulder arthroplasty (RSA) placed with either cement or press-fit fixation. The hypothesis was that there would be no difference in functional outcomes or stress shielding.

METHODS

We performed a multicenter retrospective review of primary RSAs performed with standard-length stems. The stems were identical in geometry and coating with the only variable being whether the stems were secured with cement or by a press-fit technique. The functional outcomes and radiographs of 93 press-fit stems and 26 cemented stems were reviewed at a minimum of 2 years postoperatively.

RESULTS

Significant improvements were noted in all ranges of motion and functional outcomes from baseline (P < .001), but no difference was found between the groups (P > .05). Calcar osteolysis was seen in 43% of press-fit and 58% of cemented stems (P = .266). Proximal lateral stress shielding was more common in the press-fit group (68%) than in the cemented group (25%) (P = .045). Adaptive changes were considered low in 97% of press-fit stems, and there were no cases of tuberosity resorption. No evidence of loosening or humeral component shift was noted in either group.

CONCLUSION

At short-term follow-up, no differences in functional outcomes or stem loosening were found between press-fit fixation and cemented fixation of an RSA humeral stem. Proximal stress shielding was more common with press-fit fixation with the stem in this study, but the overall changes were considered low in 97% of cases. Further study is needed to evaluate the mid- to long-term differences regarding stress shielding.

Uncemented fixation of a monoblock ingrowth polyethylene glenoid: early follow-up

BACKGROUND

Traditional monoblock pegged glenoid components are implanted with cement, increasing operative time and potentially violating more bone than those inserted without cement. We study the early radiographic loosening and reoperation rate following uncemented fixation of a hybrid cage monoblock polyethylene glenoid component.

METHODS

Between 2013 and 2015, a total of 51 shoulders underwent anatomic shoulder arthroplasty (TSA) using a hybrid ingrowth cage polyethylene glenoid component by a single surgeon, with a minimum follow-up of 2 years. In all cases, the glenoid component was placed without cement. Mean follow-up was 33 months (range, 24-57). The primary outcome was Lazarus scale-assessed radiographic loosening. Secondary outcomes included reoperation, range of motion (ROM), and patient-reported outcome measures (PROMs).

RESULTS

Twelve glenoid components (24%) had radiolucent lines. Glenoid lines were rated grade 1, grade 2, and grade 5 (6, 4, and 2 shoulders, respectively). Six shoulders (12%) had humeral lucent lines. Two shoulders (4%) underwent reoperation, only 1 of these occurring due to isolated failure of the glenoid component. As a group, mean ROM and PROMs improved significantly compared with preoperative values and exceeded the minimal clinically important difference.

CONCLUSION

Glenoid loosening remains a major concern at mid- to long-term follow-up of TSA. Placement of this hybrid cage monoblock polyethylene glenoid component in a completely uncemented fashion does not lead to early clinical loosening, after which bony ingrowth into the central cage can be expected. Uncemented fixation of this hybrid cage component appears to be a safe treatment option for patients undergoing primary TSA.

Donor-site Morbidity after Retromolar Bone Harvesting Using a Standardised Press Fit Cylinder Protocol

Precise fitting and immobilisation of bone transplants at the recipient site is of utmost importance for the healing process. With the help of the standardised Osseo Transfer System, the recipient site is adjusted to the graft, rather than vice versa as it is typically done. The aim of this study was to analyse donor-site morbidity after harvesting cylindrical bone grafts from the retromolar region using the Osseo Transfer System. The patient satisfaction with the surgical procedures was also evaluated. All patients treated with this standardised reconstruction method between 2006 and 2013 at the Department of Cranio-Maxillofacial Surgery, University Hospital Giessen, were included in this study. Complications were recorded and evaluated. Bone graft success and patient satisfaction were documented with a questionnaire, and then confirmed by clinical and radiological follow-up examinations. Fifty-four patients were treated and 64 harvested cylindrical autologous bone grafts were transplanted. In all cases, dental implants could be inserted after bone healing. One patient lost an implant, associated with failure of the bone graft. Six patients who were examined continued to show neurological disorders in locally limited areas. No complete or long-term damage of the inferior alveolar nerve occurred. More than 94% (n = 52) of the patients were 'very satisfied' or 'satisfied' with the results and would recommend this surgical treatment to other patients. The standardised Osseo Transfer was an effective treatment option for small and mid-sized alveolar ridge augmentations. A low donor-site morbidity rate and a high transplant success rate were verified. The Osseo Transfer System demonstrated to be a reliable surgical technique without major complications. We highly recommend this surgical augmentation procedure as a surgical treatment for local bone defects.

Radiographic outcomes of impaction-grafted standard-length humeral components in total shoulder and ream-and-run arthroplasty: is stress shielding an issue?

BACKGROUND

The purpose of this study was to evaluate humeral stress shielding in shoulder arthroplasties performed with a smooth, standard-length humeral stem fixed with impaction autografting.

METHODS

Two-year outcomes were evaluated for 48 ream-and-run arthroplasties and 78 total shoulder arthroplasties (TSAs) performed at a single institution. Postoperative radiographs were analyzed for adaptive changes, calcar osteolysis, and component shift or subsidence. Radiographic outcomes were analyzed for associations with patient demographic characteristics, humeral stem filling ratios, and glenoid loosening; clinical outcomes were assessed using the Simple Shoulder Test.

RESULTS

At 2 years after surgery, the ream-and-run procedures showed partial calcar osteolysis in 9 cases (19%). The TSAs showed partial calcar osteolysis in 19 cases (24%) and complete calcar osteolysis in 2 (3%). Humeral component subsidence or component shift was observed in 3 ream-and-run procedures (6%) and in 8 TSAs (10%). These radiographic findings were not significantly associated with patient demographic characteristics, canal-filling ratios, or clinical outcomes.

CONCLUSION

When inserted with impaction autografting, a smooth, standard-length humeral stem offers a secure bone-preserving approach for humeral component fixation in shoulder arthroplasty. These results with a conventional prosthesis can serve as a basis for comparison for new component designs and fixation methods.

Effect of interposed tissue and contamination on the initial stability of a highly porous press-fit acetabular cup

For biologic fixation, press-fit acetabular cups should have initial stability with minimal micromotion and osteoconductive surfaces in contact with bone. Inadequate exposure potentially influences initial stability by increasing the possibility of soft tissue interposition and contamination at the implant-tissue interface. A sawbone model was used to examine how interposed tissue and contamination influence initial cup stability. Seven groups (n = 4) were tested with varying levels of interposed fatty and fibrous tissue placed around the rim of the cup. 54 millimeter in diameter highly porous hemispherical acetabular cups (Stryker, Mahwah NJ) and 54 mm reamed cavities in sawbone blocks were used. Shells were seated and maximum lever out force was recorded for each sample. Cups with fibrous tissue spaced evenly along the rim had a lever out force that was 150% of the control (107 ± 6 vs. 150 ± 12N, p = 0.005), and fatty tissue contamination had a lever out force that was 140% of the control (143 ± 18 vs. 107 ± 6N, p = 0.04). Cups with fibrous tissue placed eccentrically along the rim had a lever out force that was double the control 107 ± 6 N vs. 200 ± 15 N (p = 0.001). Surprisingly, fatty tissue contamination and fibrous tissue interposition at the rim increased initial stability. The eccentrically interposed tissue forced the opposite pole of the cup into the bone, resulting in a more secure press-fit. However, soft tissue interposition decreases implant/bone apposition, and the effect on long term fixation is unknown. Statement of Clinical Significance: Soft tissue interposition between the bone and cup may provide higher initial stability, but its long-term effects are unknown. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res.

Value comparison of humeral component press-fit and cemented techniques in reverse shoulder arthroplasty

BACKGROUND

Press-fit humeral fixation for reverse shoulder arthroplasty (RSA) has been shown to have loosening rates and outcomes similar to a cemented technique; however, increased value has not been reported. The purpose of this study was to determine whether the press-fit technique could improve the value of RSA using the procedure value index (PVI).

METHODS

Primary RSA patients with complete hospitalization cost data, preoperative and minimum 2-year postoperative Simple Shoulder Test (SST) scores, and postoperative satisfaction were included. The PVI was calculated as improvement in the SST score (in units of minimal clinically important difference) divided by total cost and normalized. Itemized cost data were obtained from hospital financial records and categorized. Radiographic complications, infections, and revisions were noted. Comparisons were made between the press-fit and cemented RSA cohorts.

RESULTS

A total of 176 primary RSA patients (83 cemented and 93 press fit) met the inclusion criteria (mean follow-up period, 44.6 months). Surgical indications (except failed rotator cuff repair), baseline SST scores, and demographic characteristics were similar. The calculated minimal clinically important difference for the SST score was 3.98. The average PVI was significantly greater in the press-fit cohort (1.51 vs 1.03, P < .001), representing a 47% difference. SST score improvement was not significantly different (P = .23). However, total hospitalization costs were significantly lower for the press-fit cohort ($10,048.89 vs $13,601.14; P < .001).

CONCLUSION

Use of a press-fit technique led to a 47% increase in value over a cemented technique. This appeared to be a function of decreased total costs rather than increased outcome scores.

Radiographic changes differ between two different short press-fit humeral stem designs in total shoulder arthroplasty

BACKGROUND

The purpose of this study was to compare the radiographic changes of the humerus in the short term after total shoulder arthroplasty with two different short-stem humeral components. The hypothesis was that there would be no difference in radiographic changes or functional outcome based on component type.

METHODS

A retrospective review was conducted of primary total shoulder arthroplasties performed with a short press-fit humeral component. Group A included a collarless humeral stem with an oval geometry and curved stem (Ascend or Ascend Flex; Wright Medical, Memphis, TN, USA). Group B included a humeral stem with a metaphyseal collar, rectangular geometry, and straight stem (Apex; Arthrex, Inc., Naples, FL, USA). Radiographic changes and functional outcome were evaluated at a minimum of 2 years postoperatively.

RESULTS

There were 42 patients in group A and 35 patients in group B available for analysis. There was no difference in functional outcome between the groups. In group A, the mean total radiographic change score of the humerus was 3.9, with changes classified as low in 38% and high in 62%. In group B, the mean total radiographic change score of the humerus was 2.5, with changes classified as low in 77% and high in 23% (P < .001). Medial calcar osteolysis was present in 71% of group A compared with 28.5% of group B (P < .001).

CONCLUSION

At short-term follow-up, there is no difference in functional outcome or revision between 2 different humeral stem designs. However, bone adaptive changes and the rate of medial calcar osteolysis are significantly different.

Proximal stress shielding is decreased with a short stem compared with a traditional-length stem in total shoulder arthroplasty

BACKGROUND

This study compared the outcome and radiographic humeral adaptations after placement of a traditional-length (TL) or short-stem (SS) humeral component during total shoulder arthroplasty (TSA). The hypothesis was there would be no difference in outcome or radiographic adaptations.

METHODS

A multicenter retrospective review was performed of primary TSAs performed with a TL or SS press-fit humeral component. The stems were identical in geometry and coating, with the only variable being stem length. Functional outcome and radiographs were reviewed at a minimum of 2 years postoperatively in 58 TL stems and 56 SSs.

RESULTS

There were significant improvements in all range of motion and functional outcome from baseline (P < .001) but no difference between the groups (P > .05). TL stems were placed in anatomic alignment 98% of the time compared with 86% of the SS cases (P = .015), but alignment did not influence outcome. Cortical thinning was more common in the medial metaphysis with the TL stem (74%) than with the SS (50%; P = .008). Partial calcar osteolysis was seen in 31% of TL stems and in 23% of SSs (P = .348). There was no difference in loosening or shift between the 2 groups.

CONCLUSION

There is no difference in functional outcome at short-term follow-up between a TL stem and a SS in TSA. The pattern of radiographic adaptations may differ based on stem length. Further study is needed to evaluate the mid- to long-term differences, particularly with regard to calcar osteolysis.

Clinical and radiographic outcomes after total shoulder arthroplasty with an anatomic press-fit short stem

BACKGROUND

There is limited information assessing outcomes after total shoulder arthroplasty (TSA) with a press-fit short stem. The purpose of this study was to evaluate early clinical and radiographic outcomes and complications after TSA with an anatomic press-fit short stem.

METHODS

We identified 118 TSAs completed with press-fit short stem and minimum 2-year follow-up; 85 of these patients had a grit-blasted (GB) short stem placed, whereas 33 patients had short stems with proximal porous coating (PPC). Shoulder function scores, active mobility measurements, and radiographs were assessed.

RESULTS

The average age at surgery was 66.7 years, with average follow-up of 3 years. Significant improvements were noted for all shoulder function scores and active mobility measurements from the preoperative state to final follow-up (P < .001). There was no stem loosening in any patients with minimum 2-year follow-up; however, 3 female patients with GB stems had gross loosening of their humeral components before 1 year, 2 requiring revision. Radiolucent lines around the humeral component were found in 5.9% without evidence of loosening. Osseous resorption at the medial cortex was noted in 9.3%. Of patients with PPC stems, no patients were observed to have radiolucent lines compared with 8.2% in the GB group (P = .09).

CONCLUSION

TSAs with anatomic press-fit short stem showed significant clinical improvements from the preoperative state to final short-term follow-up, with few complications and minimal radiographic changes. Lack of PPC may contribute to early loosening in patients with poor bone quality. The authors now use a short stem with PPC.

Radiographic evaluation of short-stem press-fit total shoulder arthroplasty: short-term follow-up

BACKGROUND

Humeral loosening is an uncommon etiology for revision shoulder arthroplasty. We aimed to evaluate the radiographic and clinical outcomes of a short-stem press-fit humeral component after primary total shoulder arthroplasty.

METHODS

We reviewed our patient database, from January 2008 to December 2011, for primary total shoulder arthroplasties performed with a short-stem press-fit humeral component. Radiographs and clinical outcomes were evaluated in the immediate postoperative period and at the most recent follow-up, with at least 24 months of data for all patients.

RESULTS

There were 73 shoulders that met our inclusion criteria, but 4 underwent revision before 2 years' follow-up. Only 1 of these 4 was revised for aseptic humeral loosening. Sixty-nine shoulders had at least 24 months of radiographic follow-up, and 62 had radiographic and clinical follow-up. Of the 69 shoulders, 5 underwent revision for humeral loosening: 1 for aseptic loosening and 4 for infection. Two other shoulders with humeral loosening were asymptomatic, and the patients refused revision surgery. The overall revision rate for humeral loosening was 8.2% (6 of 73 shoulders). Radiolucent zones of any size were seen in 71.0%, with 8.7% of these shoulders identified as having humeral stems at risk of future loosening. Significant improvements were made in most of the measured clinical outcomes.

CONCLUSIONS

A high percentage of radiolucency was seen around the short-stem press-fit humeral components evaluated in this study at short-term follow-up. The overall rates of loosening and revision for the humeral implant examined in this study are higher than those noted in other recent studies evaluating press-fit stems. The cause of radiolucency and humeral loosening for this implant is not fully understood.

An Unexpected Complication of Residual Fibular Strut Graft While Performing A Press fit Hemiarthroplasty for A Secondary Nonunion Fracture Neck of the Femur

INTRODUCTION

Perioperative complications are well known during partial and total hip arthroplasty. One of the common categories of these complications is an intraoperative fractures of the proximal femur. Here we discuss a case of perforation of posteromedial cortex of the proximal femur, while doing a press fit modular bipolar hemiarthroplasty, in a young adult with secondary nonunion of the femoral neck fracture. The cause of this proximal femur perforation was residual fibular strut graft that, redirected the femoral stem into undesirable direction. This complication of residual fibular strut graft has not been disscussed much in the orthopedic literature previously.

CASE REPORT

A press fit modular bipolar hiparthroplasty was performed in a young adult male with nonunion fracture neck of the femur secondary to initial fixation using 6.5mm cannulated hip screws and nonvascularized free fibular strut grafting. Failure to completely remove the fibular strut from the proximal femur lead to difficult negotiation of the femoral stem into the femoral canal and ultimately a perforation in the proximal femur at the level of the lesser trochanter. A revision procedure was done to completely remove the residual fibular graft, and then a fresh press fit modular bipolar hemiarthroplasty was done.

CONCLUSION

Complete removal of fibular strut graft should be done, while performing hip arthroplasty in patients with failed fibular grafting for fracture neck of the femur.

Anatomic Double Bundle single tunnel Foreign Material Free ACL-Reconstruction - a technical note

The anterior cruciate ligament (ACL) consists of two bundles, the anteromedial (AM) and posterolateral bundle (PM). Double bundle reconstructions appear to give better rotational stability. The usual technique is to make two tunnels in the femur and two in the tibia. This is difficult and in small knees may not even be possible. We have developed a foreign material free press fit fixation for double bundle ACL reconstruction using a single femoral tunnel ((R)). This is based on the ALL PRESS FIT ACL reconstruction. It is suitable for the most common medium and, otherwise difficult, small sizes of knees.

METHOD

Using diamond edged wet grinding hollow reamers, bone cylinders in different diameters are harvested from the implantation tunnels of the tibia and femur and used for the press fit fixation. Using the press fit technique the graft is first fixed in tibia. It is then similarly fixed under tension in the femoral side with the knee in 120 degree flexion. This is called Bottom To Top Fixation (BTT). On extending the knee the graft tension is self adapting. Depending on the size of the individual knee, the diameter of the femoral bone plug is varied from 8 to 13 mm to achieve an anatomic spread with a double bundle-like insertion. The tibia tunnel can be applied with two 7 or 8 mm diameter tunnels overlapping to a semi oval tunnel between 10 to 13 mm.

RESULTS

Since May 2003 we have carried out ACL-reconstructions with Hamstring grafts without foreign material using the ALL PRESS FIT technique. Initially, an 8 mm press fit fixation was used proximally with good results. Since April 2008, the range of diameters was increased up to 13 mm. The results of the Lachman tests have been good to excellent. Results of the Pivot shift test suggested more stability with femoral broader diameters of 9,5 to 13 mm.

CONCLUSIONS

The foreign material free fixation of ham-string in the ALL PRESS FIT Bottom To Top Fixation is a successful method for ACL Reconstruction. The Diamond Instruments and tubed guiding devices are precise, reliable and easy to manage. On this basis a double bundle reconstruction is achieved using a single tunnel. A broad anatomic femoral insertion with autogenous bone plugs inserted near the cortex seems to improve rotational stability.