Influence of species and anatomical location on chondrocyte expansion

Bio-orthogonal Click Chemistry Methods to Evaluate the Metabolism of Inflammatory Challenged Cartilage after Traumatic Overloading

During traumatic joint injuries, impact overloading can cause mechanical damage to the cartilage. In the following inflammation phase, excessive inflammatory cytokines (e.g., interleukin-1β (IL-1β)) can act on chondrocytes, causing over-proliferation, apoptosis, and extracellular matrix (ECM) degradation that can lead to osteoarthritis. This study investigated the combined effects of traumatic overloading and IL-1β challenge on the metabolic activities of chondrocytes. Bovine cartilage explants underwent impact overloading followed by IL-1β exposure at a physiologically relevant dosage (1 ng/mL). New click chemistry-based methods were developed to visualize and quantify the proliferation of in situ chondrocytes in a nondestructive manner without the involvement of histological sectioning or antibodies. Click chemistry-based methods were also employed to measure the ECM synthesis and degradation in cartilage explants. As the click reactions are copper-free and bio-orthogonal, i.e., with negligible cellular toxicity, cartilage ECM was cultured and studied for 6 weeks. Traumatic overloading induced significant cell death, mainly in the superficial zone. The high number of dead cells reduced the overall proliferation of chondrocytes as well as the synthesis of glycosaminoglycan (GAG) and collagen contents, but overloading alone had no effects on ECM degradation. IL-1β challenge had little effect on cell viability, proliferation, or protein synthesis but induced over 40% GAG loss in 10 days and 61% collagen loss in 6 weeks. For the overloaded samples, IL-1β induced greater degrees of degradation, with 68% GAG loss in 10 days and 80% collagen loss in 6 weeks. The results imply a necessary immediate ease of inflammation after joint injuries when trauma damage on cartilage is present. The new click chemistry methods could benefit many cellular and tissue engineering studies, providing convenient and sensitive assays of metabolic activities of cells in native three-dimensional (3D) environments.

HOX Gene Expressions in Cultured Articular and Nasal Equine Chondrocytes

Simple Summary

Once articular cartilage is damaged, it is unable to regain its original tissue integrity, which leads to osteoarthritis including degeneration of the joint, suffering and pain. In equine medicine there is no therapy available to repair joint defects. Hyaline cartilage of nasal septum shows a high basal collagen II expression, which may have a positive effect on damaged articular cartilage. Therefore, nasal septum could be a potential source for chondrocytes for autologous implantation in the future.

Abstract

Osteoarthritis the quality and span of life in horses. Previous studies focused on nasal cartilage as a possible source for autologous chondrocyte implantation (ACI) in cartilage defects in humans. “HOX gene-negative” nasal chondrocytes adapted articular HOX patterns after implantation into caprine joint defects and produced cartilage matrix proteins. We compared the HOX gene profile of equine chondrocytes of nasal septum, anterior and posterior fetlock to identify nasal cartilage as a potential source for ACI in horses. Cartilage was harvested from seven horses after death and derived chondrocytes were cultured in a monolayer to fourth subcultivation. HOX A3, D1, D8 and chondrocyte markers COL2 and SOX9 were analyzed with qPCR in chondrocytes of three different locations obtained during passage 0 and passage 2. HOX gene expression showed no significant differences between the locations but varied significantly between the horses. HOX genes and SOX9 remained stable during culturing. Cultured nasal chondrocytes may be a target for future research in cell-based regenerative therapies in equine osteoarthritis. The involvement of HOX genes in the high regenerative and adaptive potential of nasal chondrocytes observed in previous studies could not be confirmed.

Translating the application of transforming growth factor-β1, chondroitinase-ABC, and lysyl oxidase-like 2 for mechanically robust tissue-engineered human neocartilage

Strategies to overcome the limited availability of human articular chondrocytes and their tendency to dedifferentiate during expansion are required to advance their clinical use and to engineer functional cartilage on par with native articular cartilage. This work sought to determine whether a biochemical factor (transforming growth factor-β1 [T]), a biophysical agent (chondroitinase-ABC [C]), and a collagen crosslinking enzyme (lysyl oxidase-like 2 [L]) are efficacious in forming three-dimensional human neocartilage from expanded human articular chondrocytes. Among the treatment regimens, the combination of the three stimuli (TCL treatment) led to the most robust glycosaminoglycan content, total collagen content, and type II collagen production. In particular, TCL treatment synergistically increased tensile stiffness and strength of human neocartilage by 3.5-fold and 3-fold, respectively, over controls. Applied to two additional donors, the beneficial effects of TCL treatment appear to be donor independent; tensile stiffness and strength were increased by up to 8.5-fold and 3-fold, respectively, over controls. The maturation of human neocartilage in response to TCL treatment was examined following 5 and 8 weeks of culture, demonstrating maintenance or further enhancement of functional properties. The present study identifies a novel strategy for engineering human articular cartilage using serially passaged chondrocytes.

Reducing the number of laboratory animals used in tissue engineering research by restricting the variety of animal models. Articular cartilage tissue engineering as a case study

The use of laboratory animals in tissue engineering research is an important underexposed ethical issue. Several ethical questions may be raised about this use of animals. This article focuses on the possibilities of reducing the number of animals used. Given that there is considerable debate about the adequacy of the current animal models in tissue engineering research, we investigate whether it is possible to reduce the number of laboratory animals by selecting and using only those models that have greatest predictive value for future clinical application of the tissue engineered product. The field of articular cartilage tissue engineering is used as a case study. Based on a study of the scientific literature and interviews with leading experts in the field, an overview is provided of the animal models used and the advantages and disadvantages of each model, particularly in terms of extrapolation to the human situation. Starting from this overview, it is shown that, by skipping the small models and using only one large preclinical model, it is indeed possible to restrict the number of animal models, thereby reducing the number of laboratory animals used. Moreover, it is argued that the selection of animal models should become more evidence based and that researchers should seize more opportunities to choose or create characteristics in the animal models that increase their predictive value.

Engineered cartilage using primary chondrocytes cultured in a porous cartilage-derived matrix

AIM

To investigate the cell growth, matrix accumulation and mechanical properties of neocartilage formed by human or porcine articular chondrocytes on a porous, porcine cartilage-derived matrix (CDM) for use in cartilage tissue engineering.

MATERIALS & METHODS

We examined the physical properties, cell infiltration and matrix accumulation in different formulations of CDM and selected a CDM made of homogenized cartilage slurry as an appropriate scaffold for long-term culture of human and porcine articular chondrocytes.

RESULTS

The CDM scaffold supported growth and proliferation of both human and porcine chondrocytes. Histology and immunohistochemistry showed abundant cartilage-specific macromolecule deposition at day 28. Human chondrocytes migrated throughout the CDM, showing a relatively homogeneous distribution of new tissue accumulation, whereas porcine chondrocytes tended to form a proteoglycan-rich layer primarily on the surfaces of the scaffold. Human chondrocyte-seeded scaffolds had a significantly lower aggregate modulus and hydraulic permeability at day 28.

CONCLUSIONS

These data show that a scaffold derived from native porcine articular cartilage can support neocartilage formation in the absence of exogenous growth factors. The overall characteristics and properties of the constructs depend on factors such as the concentration of CDM used, the porosity of the scaffold, and the species of chondrocytes.

Comparison of articular cartilage repair by autologous chondrocytes with and without in vitro cultivation

OBJECTIVE

autologous chondrocyte implantation usually requires in vitro cell expansion before implantation. We compared the efficacy of cartilage regeneration by in vitro-expanded chondrocytes at high density and freshly harvested chondrocytes at low density.

DESIGN

surgically created osteochondral defects at weight-bearing surface of femoral condyles of domestic pigs were repaired by biphasic cylindrical porous plugs of DL-poly-lactide-co-glycolide and beta-tricalcium phosphate. Plugs were seeded with autologous chondrocytes in its chondral phase, and press-fit to defects. Seeded cells were (1) in vitro-expanded chondrocytes harvested from stifle joint 3 weeks before implantation and (2) freshly harvested chondrocytes from recipient knee. Seeding densities were 70 x 10(6) and 7 x 10(6) cells/mL, respectively. Cell-free plugs served as control and defects remained untreated as null control. Outcome was examined at 6 months with International Cartilage Repair Society Scale.

RESULTS

the two experimental groups were repaired by hyaline cartilage with collagen type II and Safranin-O. Tissue in control group was primarily fibrocartilage. No regeneration was found in null control. Experimental groups had higher mean International Cartilage Repair Society scores than control in surface, matrix, and cell distribution, but were comparable with control in cell viability, subchondral bone, and mineralization. No significant difference existed between two experimental groups in any of the six categories. Uni-axial indentation test revealed similar creeping stress-relaxation property as native cartilage on experimental, but not control, specimen.

CONCLUSIONS

cartilage could regenerate in both experimental models, in comparable quality. Culture of chondrocytes before implantation is not necessary.

The design and use of animal models for translational research in bone tissue engineering and regenerative medicine

This review provides an overview of animal models for the evaluation, comparison, and systematic optimization of tissue engineering and regenerative medicine strategies related to bone tissue. This review includes an overview of major factors that influence the rational design and selection of an animal model. A comparison is provided of the 10 mammalian species that are most commonly used in bone research, and existing guidelines and standards are discussed. This review also identifies gaps in the availability of animal models: (1) the need for assessment of the predictive value of preclinical models for relative clinical efficacy, (2) the need for models that more effectively mimic the wound healing environment and mass transport conditions in the most challenging clinical settings (e.g., bone repair involving large bone and soft tissue defects and sites of prior surgery), and (3) the need for models that allow more effective measurement and detection of cell trafficking events and ultimate cell fate during the processes of bone modeling, remodeling, and regeneration. The ongoing need for both continued innovation and refinement in animal model systems, and the need and value of more effective standardization are reinforced.

In vitro ovine articular chondrocyte proliferation: experiments and modelling

This study focuses on analysis of in vitro cultures of chondrocytes from ovine articular cartilage. Isolated cells were seeded in Petri dishes, then expanded to confluence and phenotypically characterized by flow cytometry. The sigmoidal temporal profile of total counts was obtained by classic haemocytometry and corresponding cell size distributions were measured electronically using a Coulter Counter. A mathematical model recently proposed (1) was adopted for quantitative interpretation of these experimental data. The model is based on a 1-D (that is, mass-structured), single-staged population balance approach capable of taking into account contact inhibition at confluence. The model's parameters were determined by fitting measured total cell counts and size distributions. Model reliability was verified by predicting cell proliferation counts and corresponding size distributions at culture times longer than those used when tuning the model's parameters. It was found that adoption of cell mass as the intrinsic characteristic of a growing chondrocyte population enables sigmoidal temporal profiles of total counts in the Petri dish, as well as cell size distributions at 'balanced growth', to be adequately predicted.

Magnetic resonance imaging of chondrocytes labeled with superparamagnetic iron oxide nanoparticles in tissue-engineered cartilage

The distribution of cells within tissue-engineered constructs is difficult to study through nondestructive means, such as would be required after implantation. However, cell labeling with iron-containing particles may prove to be a useful approach to this problem, because regions containing such labeled cells have been shown to be readily detectable using magnetic resonance imaging (MRI). In this study, we used the Food and Drug Administration-approved superparamagnetic iron oxide (SPIO) contrast agent Feridex in combination with transfection agents to label chondrocytes and visualize them with MRI in two different tissue-engineered cartilage constructs. Correspondence between labeled cell spatial location as determined using MRI and histology was established. The SPIO-labeling process was found not to affect the phenotype or viability of the chondrocytes or the production of major cartilage matrix constituents. We believe that this method of visualizing and tracking chondrocytes may be useful in the further development of tissue engineered cartilage therapeutics.

Zonal chondrocytes seeded in a layered agarose hydrogel create engineered cartilage with depth-dependent cellular and mechanical inhomogeneity

We hypothesized that zonal populations of chondrocytes seeded into a bilayered scaffold with initially prescribed depth-varying, compressive material properties will lead to a biomimetic cartilage tissue construct with depth-dependent cellular and compressive mechanical inhomogeneity similar to that of the native tissue. Superficial zone chondrocytes (SZCs) and middle/deep zone chondrocytes (MDZCs) were isolated and encapsulated with 2% or 3% agarose to form single-layered constructs of 2% SZC, 3% SZC, 2% MDZC; bilayered constructs of 2% SZC/2% MDZC and 3% SZC/2% MDZC; and 2% mixed chondrocyte controls. For SZCs on day 42, increased glycosaminoglycan (GAG) and collagen was found with increased agarose concentration and when layered with MDZCs. Superficial zone protein increased with agarose concentration in bilayered constructs. For MDZCs, increased GAG content and regulation of cell proliferation was observed when layered with SZCs. Bilayered constructs possessed a depth-dependent compressive modulus qualitatively similar to that of native articular cartilage, whereas controls showed a U-shaped profile with stiffer peripheral edges and softer middle region. This study is the first to create an engineered cartilage tissue with depth-varying cellular as well as mechanical inhomogeneity. Future studies will determine if replicating inhomogeneity is advantageous in clinical applications of tissue engineered cartilage.

Differing in vitro biology of equine, ovine, porcine and human articular chondrocytes derived from the knee joint: an immunomorphological study

For lack of sufficient human cartilage donors, chondrocytes isolated from various animal species are used for cartilage tissue engineering. The present study was undertaken to compare key features of cultured large animal and human articular chondrocytes of the knee joint. Primary chondrocytes were isolated from human, porcine, ovine and equine full thickness knee joint cartilage and investigated flow cytometrically for their proliferation rate. Synthesis of extracellular matrix proteins collagen type II, cartilage proteoglycans, collagen type I, fibronectin and cytoskeletal organization were studied in freshly isolated or passaged chondrocytes using immunohistochemistry and western blotting. Chondrocytes morphology, proliferation, extracellular matrix synthesis and cytoskeleton assembly differed substantially between these species. Proliferation was higher in animal derived compared with human chondrocytes. All chondrocytes expressed a cartilage-specific extracellular matrix. However, after monolayer expansion, cartilage proteoglycan expression was barely detectable in equine chondrocytes whereby fibronectin and collagen type I deposition increased compared with porcine and human chondrocytes. Animal-derived chondrocytes developed more F-actin fibers during culturing than human chondrocytes. With respect to proliferation and extracellular matrix synthesis, human chondrocytes shared more similarity with porcine than with ovine or equine chondrocytes. These interspecies differences in chondrocytes in vitro biology should be considered when using animal models.

Design and application of an oscillatory compression device for cell constructs

Mechanical compression has been shown to impact cell activity; however a need for a single device to perform a broader range of parametric studies exists. We have developed an oscillatory displacement controlled device to uniaxially strain cell constructs under both static and dynamic compression and used this device to investigate gene expression in cell constructs. The device has a wide stroke (0.25-4 mm) and frequency range (0.1-3 Hz) and several loading waveforms are possible. Alginate cellular constructs with embedded equine chondrocytes were tested and viability was maintained for the 24 h test period. Off-line mechanical testing is described and a modulus value of 18.2 +/- 1.3 kPa found for alginate disks which indicates the level of stress achieved with this deformation profile. Static (15% strain) and dynamic (15% strain, 1 Hz, triangle waveform) testing of chondrocyte constructs was performed and static compression showed significantly higher collagen II expression than dynamic using quantitative RT-PCR. In contrast, differences in matrix metalloproteinase-3 (MMP-3) expression were statistically insignificant. These studies indicate the utility of our device for studying cell activity in response to compression and suggest further studies regarding how the load and strain spectrum impact chondrocyte activity.