Facile synthesis of ultrathin magnetic iron oxide nanoplates by Schikorr reaction

Degradation of Chloroform by Zerovalent Iron: Effects of Mechanochemical Sulfidation and Nitridation on the Kinetics and Mechanism

Chloroform (CF) is a widely used chemical reagent and disinfectant and a probable human carcinogen. The extensive literature on halocarbon reduction with zerovalent iron (ZVI) shows that transformation of CF is slow, even with nano, bimetallic, sulfidated, and other modified forms of ZVI. In this study, an alternative method of ZVI modification─involving simultaneous sulfidation and nitridation through mechanochemical ball milling─was developed and shown to give improved degradation of CF (i.e., higher degradation rate and inhibited H₂ evolution reaction). The composite material (denoted as S-N(C)-ZVI) gave synergistic effects of nitridation and sulfidation on CF degradation. A complete chemical reaction network (CRN) analysis of CF degradation suggests that O-nucleophile-mediated transformation pathways may be the main route for the formation of the terminal nonchlorinated products (formate, CO, and glycolic polymers) that have been used to explain the undetected products needed for mass balance. Material characterizations of the ZVI recovered after batch experiments showed that sulfidation and nitridation promoted the formation of Fe₃O₄ on the S-N(C)-ZVI particles, and the effect of aging on CF degradation rates was minor for S-N(C)-ZVI. The synergistic benefits of sulfidation and nitridation on CF degradation were also observed in experiments performed with groundwater.

Effect of External Magnetic Field on Bulk Heterojunction Polymer Solar Cells

Polymer solar cells (PSCs) with a bulk heterojunction (BHJ) device structure have incredible advantages, such as low-cost fabrication and flexibility. However, the power conversion efficiency (PCE) of BHJ PSCs needs to be further improved to realize their practical applications. In this study, boosted PCEs from PSCs based on BHJ composites incorporated with Fe₃ O₄ magnetic nanoparticles (MNPs), aligned by an external magnetic field (EMF), are reported. It is found that the coercive electric field within the Fe₃ O₄ MNPs generated by the EMF has a strong and positive influence on the charge generation, which results in a more than 10% increase in free charge carriers. Moreover, the coercive electric field speeds up the charge carrier transport and suppresses charge carrier recombination within PSCs. In addition, a shortened extraction time makes charge carriers more likely to make it to the electrodes. As a result, more than 15% enhancement in PCE is observed from the PSCs based on the BHJ composite incorporated with the Fe₃ O₄ MNPs and the EMF as compared with that based on the BHJ composite thin film. This work indicates that the incorporation of MNPs and the EMF is a facile way to enhance the PCEs of PSCs.

Growth and genome-based insights of Fe(III) reduction of the high-temperature and NaCl-tolerant Shewanella xiamenensis from Changqing oilfield of China

Introduction

A facultative anaerobe bacterium Shewanella xiamenensis CQ-Y1 was isolated from the wastewater of Changqing oilfield in Shaanxi Province of China. Shewanella is the important dissimilatory metal-reducing bacteria. It exhibited a well potential application in biodegradation and bioremediation.

Methods

Genome sequencing, assembling and functional annotation were conducted to explore the genome information of CQ-Y1. The effect of temperatures and NaCl concentrations on the CQ-Y1 growth and Fe(III) reduction were investigated by UV visible spectrophotometry, SEM and XRD.

Results

Genomic analysis revealed its complete genome was a circular chromosome of 4,710,887 bp with a GC content of 46.50% and 4,110 CDSs genes, 86 tRNAs and 26 rRNAs. It contains genes encoding for Na⁺/H⁺ antiporter, K⁺/Cl^- transporter, heat shock protein associated with NaCl and high-temperature resistance. The presence of genes related to flavin, Cytochrome c, siderophore, and other related proteins supported Fe(III) reduction. In addition, CQ-Y1 could survive at 10% NaCl (w/v) and 45°C, and temperature showed more pronounced effects than NaCl concentration on the bacterial growth. The maximum Fe(III) reduction ratio of CQ-Y1 reached 70.1% at 30°C without NaCl, and the reduction reaction remained active at 40°C with 3% NaCl (w/v). NaCl concentration was more effective than temperature on microbial Fe(III) reduction. And the reduction products under high temperature and high NaCl conditions were characterized as Fe₃(PO₄)₂, FeCl₂ and Fe(OH)₂.

Discussion

Accordingly, a Fe(III) reduction mechanism of CQ-Y1 mediated by Cytochrome c and flavin was hypothesised. These findings could provide information for a better understanding of the origin and evolution of genomic and metabolic diversity of S. xiamenensis.

LAPONITE® nanodisk-"decorated" Fe3O4 nanoparticles: a biocompatible nano-hybrid with ultrafast magnetic hyperthermia and MRI contrast agent ability

Magnetic Fe₃O₄ nanoparticles "decorated" by LAPONITE® nanodisks have been materialized utilizing the Schikorr reaction following a facile approach and tested as mediators of heat for localized magnetic hyperthermia (MH) and as magnetic resonance imaging (MRI) agents. The synthetic protocol involves the interaction between two layered inorganic compounds, ferrous hydroxide, Fe(OH)₂, and the synthetic smectite LAPONITE® clay Na_0.7⁺[(Si₈Mg_5.5Li_0.3)O₂₀(OH)₄]_0.7^-, towards the formation of superparamagnetic Fe₃O₄ nanoparticles, which are well decorated by the diamagnetic clay nanodisks. The latter imparts high negative ζ-potential values (up to -34.1 mV) to the particles, which provide stability against flocculation and precipitation, resulting in stable water dispersions. The obtained LAPONITE®-"decorated" Fe₃O₄ nanohybrids were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Mössbauer spectroscopy, dynamic light scattering (DLS) and vibrating sample magnetometry (VSM) at room temperature, revealing superior magnetic hyperthermia performance with specific absorption rate (SAR) values reaching 540 W g_Fe^-1 (28 kA m^-1, 150 kHz) for the hybrid material with a magnetic loading of 50 wt% Fe₃O₄/LAPONITE®. Toxicity studies were also performed with human glioblastoma (GBM) cells and human foreskin fibroblasts (HFF), which show negligible to no toxicity. Furthermore, T₂-weighted MR imaging of rodent brain shows that the LAPONITE®-"decorated" Fe₃O₄ nanohybrids predominantly affected the transverse T₂ relaxation time of tissue water, which resulted in a signal drop on the MRI T₂-weighted imaging, allowing for imaging of the magnetic nanoparticles.

The effects of Methanococcus maripaludis on the corrosion behavior of EH40 steel in seawater

The corrosion behavior of EH40 steel in seawater enriched with Methanococcus maripaludis was investigated through electrochemical methods and surface analysis techniques. The results revealed that the hydrogenotrophic M. maripaludis strain can utilize acetate as an alternative energy source. Corrosion of EH40 steel is initially inhibited, but prolonged exposure with the methanogen leads to an eventual corrosion propagation. During the early stage of immersion in M. maripaludis culture medium, the formation of a protective corrosion products film inhibits EH40 steel corrosion. The presence of M. maripaludis promotes both anodic and cathodic reactions of EH40 steel in the late stage of exposure. Surface analyses revealed that pitting corrosion is closely related to uneven distribution of M. maripaludis biofilm on EH40 steel surface.

Patterns of in situ Mineral Colonization by Microorganisms in a ~60°C Deep Continental Subsurface Aquifer

The microbial ecology of the deep biosphere is difficult to characterize, owing in part to sampling challenges and poorly understood response mechanisms to environmental change. Pre-drilled wells, including oil wells or boreholes, offer convenient access, but sampling is frequently limited to the water alone, which may provide only a partial view of the native diversity. Mineral heterogeneity demonstrably affects colonization by deep biosphere microorganisms, but the connections between the mineral-associated and planktonic communities remain unclear. To understand the substrate effects on microbial colonization and the community response to changes in organic carbon, we conducted an 18-month series of in situ experiments in a warm (57°C), anoxic, fractured carbonate aquifer at 752 m depth using replicate open, screened cartridges containing different solid substrates, with a proteinaceous organic matter perturbation halfway through this series. Samples from these cartridges were analyzed microscopically and by Illumina (iTag) 16S rRNA gene libraries to characterize changes in mineralogy and the diversity of the colonizing microbial community. The substrate-attached and planktonic communities were significantly different in our data, with some taxa (e.g., Candidate Division KB-1) rare or undetectable in the first fraction and abundant in the other. The substrate-attached community composition also varied significantly with mineralogy, such as with two Rhodocyclaceae OTUs, one of which was abundant on carbonate minerals and the other on silicic substrates. Secondary sulfide mineral formation, including iron sulfide framboids, was observed on two sets of incubated carbonates. Notably, microorganisms were attached to the framboids, which were correlated with abundant Sulfurovum and Desulfotomaculum sp. sequences in our analysis. Upon organic matter perturbation, mineral-associated microbial diversity differences were temporarily masked by the dominance of putative heterotrophic taxa in all samples, including OTUs identified as Caulobacter, Methyloversatilis, and Pseudomonas. Subsequent experimental deployments included a methanogen-dominated stage (Methanobacteriales and Methanomicrobiales) 6 months after the perturbation and a return to an assemblage similar to the pre-perturbation community after 9 months. Substrate-associated community differences were again significant within these subsequent phases, however, demonstrating the value of in situ time course experiments to capture a fraction of the microbial assemblage that is frequently difficult to observe in pre-drilled wells.

pH Transitions and electrochemical behavior during the synthesis of iron oxide nanoparticles with gas-diffusion electrodes

Gas diffusion electrocrystallization (GDEx) was explored for the synthesis of iron oxide nanoparticles (IONPs). A gas-diffusion cathode was employed to reduce oxygen, producing hydroxyl ions (OH^-) and oxidants (H₂O₂ and HO₂ ^-), which acted as reactive intermediates for the formation of stable IONPs. The IONPs were mainly composed of pure magnetite. However, their composition strongly depended on the presence of a weak acid, i.e., ammonium chloride (NH₄Cl), and on the applied electrode potential. Pure magnetite was obtained due to the simultaneous action of H₂O₂ and the buffer capacity of the added NH₄Cl. Magnetite and goethite were identified as products under different operating conditions. The presence of NH₄Cl facilitated an acid-base reaction and, in some cases, led to cathodic deprotonation, forming a surplus of hydrogen peroxide, while adding the weak acid promoted gradual changes in the pH by slightly enhancing H₂O₂ production when increasing the applied potential. This also resulted in smaller average crystallite sizes as follows: 20.3 ± 0.6 at -0.350 V, 14.7 ± 2.1 at -0.550 and 12.0 ± 2.0 at -0.750 V. GDEx is also demonstrated to be a green, effective, and efficient cathodic process to recover soluble iron to IONPs, being capable of removing >99% of the iron initially present in the solution.

Impact of Cr and Co on 99Tc retention in magnetite: A combined study of ab initio molecular dynamics and experiments

The effect of co-mingled dopants, Co(II) and Cr(III), on Tc(IV) incorporation and retention in magnetite under varying temperatures (75-700 °C) was explored using ab initio molecular dynamics simulations, batch experiments, and solid phase characterization. Tc(IV) stabilization was achieved with a magnetite surface oversaturated with or containing an equal number of Tc and Cr. Under oversaturation conditions, the forced formation of a Cr₂O₃ phase on the magnetite surface may help prevent Tc release. Upon Co addition, and depending on the relative concentration of Tc, Cr, and Co at the magnetite surface, Co was found to preferentially stabilize Cr rather than Tc and suppress the formation of the protective Cr₂O₃ surface phase. Only systems with similar Cr/Co concentrations or relatively high Cr concentrations stabilized Tc within magnetite. As such, the relative concentration of Tc, Cr, and Co was identified as a critical parameter for maximizing dopant efficacy towards Tc stabilization in magnetite.

Shape Anisotropic Iron Oxide-Based Magnetic Nanoparticles: Synthesis and Biomedical Applications

Research on iron oxide-based magnetic nanoparticles and their clinical use has been, so far, mainly focused on the spherical shape. However, efforts have been made to develop synthetic routes that produce different anisotropic shapes not only in magnetite nanoparticles, but also in other ferrites, as their magnetic behavior and biological activity can be improved by controlling the shape. Ferrite nanoparticles show several properties that arise from finite-size and surface effects, like high magnetization and superparamagnetism, which make them interesting for use in nanomedicine. Herein, we show recent developments on the synthesis of anisotropic ferrite nanoparticles and the importance of shape-dependent properties for biomedical applications, such as magnetic drug delivery, magnetic hyperthermia and magnetic resonance imaging. A brief discussion on toxicity of iron oxide nanoparticles is also included.

Magnetic field induced uniaxial alignment of the lyotropic liquid-crystalline PMMA-grafted Fe3O4 nanoplates with controllable interparticle interaction

Magnetite (Fe₃O₄) nanoplates with a hexagonal platelet shape were synthesized by two steps: hydrothermal synthesis of iron(iii) oxide (α-Fe₂O₃) nanoplates followed by wet chemical reduction of the α-Fe₂O₃ nanoplates. Then, poly(methyl methacrylate) (PMMA) chains were grafted onto the surface of the hexagonal Fe₃O₄ nanoplates (F) via surface-initiated atom transfer radical polymerization (SI-ATRP), which ensures dispersion stability in organic solvents and ionic liquids. After mixing with 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Emim⁺][NTf₂ ^-]), a representative ionic liquid, the resulting PMMA-modified F were found to show good lyotropic liquid-crystalline (LC) behaviour in [Emim⁺][NTf₂ ^-] and to exhibit a fast response to the application of an external magnetic field. Ultrasmall-angle synchrotron X-ray scattering (USAXS) measurements verified that the PMMA chain length, the weight ratio of the ionic liquid and the external magnetic field could significantly influence the interparticle distance (I _D) of the PMMA-modified F in [Emim⁺][NTf₂ ^-]. In particular, the lyotropic LC phase could be assigned as a nematic phase with a columnar alignment. In addition, the PMMA-modified F maintained a uniaxially aligned nematic columnar structure along the magnetic field direction. Our study also determined the mechanism for the special alignment of the PMMA-modified F under an external magnetic field by analysing the growth axis, the easy magnetic axes, and the interparticle distance of F. The results suggested that the special alignment of the PMMA-modified F was affected by the interparticle interaction caused by the PMMA long chains on F under the magnetic field. Furthermore, the present study revealed that PMMA-modified F exhibited a new magnetic field responsive behaviour that led not only to the formation of a uniaxial alignment structure but also to control of I _D with the help of the PMMA soft corona under the application of a magnetic field. These features could prove to be a promising advance towards novel applications of magnetic nanoparticles (NPs), such as functional magnetic fluids, rewritable magnetic switching devices, and smart magneto-electrochemical nanosensors.

Biocompatible iron(II)-doped carbon dots as T1-weighted magnetic resonance contrast agents and fluorescence imaging probes

The one-pot synthesis of iron-doped carbon quantum dots (Fe-CQDs) for use as both magnetic resonance (MR) and fluorescent (dual-mode) imaging nanoprobes is described. Comprehensive characterizations of the material confirmed the successful doping of the CQDs with Fe(II) ions. The imaging probe has a longitudinal relaxivity of 3.92 mM^-1∙s^-1 and a low r₂/r₁ ratio of 1.27, both of which are critical for T₁-weighted contrast agents. The maximum emission of Fe-CQDs locates at 450 nm under 375 nm excitation, which also can be applied to fluorescence imaging. Biotoxicity assessment showed good biocompatibility of the Fe-CQDs. The in-vitro experiments with A549 cells indicated that the Fe-CQDs are viable candidates as dual-mode (MR/fluorescence) imaging nanoprobes. For in-vivo experiments, they exhibit high contrast efficiency, thereby improving the positive contrast in T₁-weighted MR images. In-vivo time-dependent MRI of major organs showed that the Fe-CQDs undergo fast glomerular filtration and can evade immuno-absorption due to their ultra-small size and excellent biocompatibility. Graphical abstract Schematic presentation of the synthesis of Fe-CQDs and applications to magnetic resonance and fluorescent dual-mode imaging.

Design strategies for shape-controlled magnetic iron oxide nanoparticles

Ferrimagnetic iron oxide nanoparticles (magnetite or maghemite) have been the subject of an intense research, not only for fundamental research but also for their potentiality in a widespread number of practical applications. Most of these studies were focused on nanoparticles with spherical morphology but recently there is an emerging interest on anisometric nanoparticles. This review is focused on the synthesis routes for the production of uniform anisometric magnetite/maghemite nanoparticles with different morphologies like cubes, rods, disks, flowers and many others, such as hollow spheres, worms, stars or tetrapods. We critically analyzed those procedures, detected the key parameters governing the production of these nanoparticles with particular emphasis in the role of the ligands in the final nanoparticle morphology. The main structural and magnetic features as well as the nanotoxicity as a function of the nanoparticle morphology are also described. Finally, the impact of each morphology on the different biomedical applications (hyperthermia, magnetic resonance imaging and drug delivery) are analysed in detail. We would like to dedicate this work to Professor Carlos J. Serna, Instituto de Ciencia de Materiales de Madrid, ICMM/CSIC, for his outstanding contribution in the field of monodispersed colloids and iron oxide nanoparticles. We would like to express our gratitude for all these years of support and inspiration on the occasion of his retirement.

Influence of Fe(II) on the Se(IV) sorption under oxic/anoxic conditions using bentonite

⁷⁹Se, one of the key radionuclides for nuclear waste disposal, threatens the quality of the environment, as well as human health. Therefore, it needs to be permanently isolated from the biosphere. The aim of the study was to investigate the effects of Fe(II)/Fe(III) on the removal of ⁷⁹Se using bentonite in the pH range of 2.0-10.0 under oxic/anoxic conditions. Under oxic conditions, Se(IV) prefers to form inner-sphere complexes with Fe(III)-oxyhydroxide, derived from the oxidization of Fe(II) using oxygen. Interestingly, Se(IV) will interact with Fe(III) and form a poorly soluble ferric selenite at pH ∼4 under oxic conditions. Under anoxic conditions, however, the concentration of Fe(II) is closely related to the sorption process of Se(IV) on bentonite. When the concentration of Fe(II) was less than 1%, Fe(II) combined with the hydroxyl, forming Fe(OH)₂, which generated a disproportionation at pH ∼8 and formed a new sorbent, Fe₃O₄. However, when the concentration of Fe(II) was increased to 5%, reduction precipitation was the primary way to remove Se(IV) in aqueous solution. XANES (X-ray Absorption Near Edge Structure) spectra showed that higher pH values are beneficial for the formation of the final thermodynamic reduction product, Fe selenide. These results suggested that Fe(II) significantly affect the Se(IV) sorption. Overall, this study confirmed the significant role of Fe(II) on the retardation of ⁷⁹Se and on remediation for Se(IV) contamination in the hydrosphere.

Microwave Absorption and the Magnetic Hyperthermia Applications of Li0.3Zn0.3Co0.1Fe2.3O4 Nanoparticles in Multiwalled Carbon Nanotube Matrix

Nanoparticles of Li_0.3Zn_0.3Co_0.1Fe_2.3O₄ (LZC) were prepared by the sol-gel method and dried in a furnace at ∼200 °C. The dried sample was annealed at 500, 600, 700, and 800 °C for 5 h each. Rietveld analysis of X-ray diffraction patterns confirms the cubic Fd3̅m phase formation with lattice parameters ranged from 8.376 up to 8.390 Å and allows the crystallite sizes (d_cryst) to be estimated. To enhance microwave (MW) absorption as well as the effectiveness for hyperthermia treatment, nanoparticles are taken in the matrix of multiwalled carbon nanotubes (MWCNTs) and the morphology of the so-prepared samples (LZC@MWCNT) was studied by scanning electron microscopy and transmission electron microscopy analyses. Both static and dynamic magnetic properties were investigated on the samples of LZC nanoparticles and compared to those of the samples of LZC@MWCNT. The samples annealed at 500, 600, and 800 °C are excellent candidates in cancer treatment as ac magnetic heating analysis shows that the hyperthermia temperature (42 °C) was successfully achieved for an applied ac magnetic field of 420 Oe and 300 kHz frequency. MW absorption study also reveals that the samples of LZC@MWCNT could be used as a potential MW absorbing material for which a maximum reflection loss (R_L) of ∼-21 dB was achieved at a frequency of 15.27 GHz for only 1 mm layer thickness.

Hard templating ultrathin polycrystalline hematite nanosheets: effect of nano-dimension on CO2 to CO conversion via the reverse water-gas shift reaction

Understanding how nano-dimensionality impacts iron oxide based catalysis is central to a wide range of applications. Here, we focus on hematite nanosheets, nanowires and nanoparticles as applied to catalyze the reverse water gas shift (RWGS) probe reaction. We introduce a novel approach to synthesize ultrathin (4-7 nm) hematite nanosheets using copper oxide nanosheets as a hard template and propose a reaction mechanism based on density functional theory (DFT) calculations. Hematite nanowires and nanoparticles were also synthesized and characterized. H₂ temperature programmed reduction (H₂-TPR) and RWGS reactions were performed to glean insights into the mechanism of CO₂ conversion to CO over the iron oxide nanomaterials and were compared to H₂ binding energy calculations based on density functional theory. While the nanosheets did exhibit high CO₂ conversion, 28% at 510 °C, we found that the iron oxide nanowires had the highest CO₂ conversion, reaching 50% at 750 °C under atmospheric pressure. No products besides CO and H₂O were detected.

Reduction and Simultaneous Removal of 99Tc and Cr by Fe(OH)2(s) Mineral Transformation

Technetium (Tc) remains a priority remediation concern due to persistent challenges, including mobilization due to rapid reoxidation of immobilized Tc, and competing comingled contaminants, e.g., Cr(VI), that inhibit Tc(VII) reduction and incorporation into stable mineral phases. Here Fe(OH)₂(s) is investigated as a comprehensive solution for overcoming these challenges, by serving as both the reductant, (Fe(II)), and the immobilization agent to form Tc-incorporated magnetite (Fe₃O₄). Trace metal analysis suggests removal of Tc(VII) and Cr(VI) from solution occurs simultaneously; however, complete removal and reduction of Cr(VI) is achieved earlier than the removal/reduction of comingled Tc(VII). Bulk oxidation state analysis of the final magnetite solid phase by XANES shows that the majority of Tc is Tc(IV), which is corroborated by XPS measurements. Furthermore, EXAFS results show successful, albeit partial, Tc(IV) incorporation into magnetite octahedral sites. Cr XPS analysis indicates reduction to Cr(III) and the formation of a Cr-incorporated spinel, Cr₂O₃, and Cr(OH)₃ phases. Spinel (modeled as Fe₃O₄), goethite (α-FeOOH), and feroxyhyte (δ-FeOOH) are detected in all reacted final solid phase samples analyzed by XRD. Incorporation of Tc(IV) has little effect on the spinel lattice structure. Reaction of Fe(OH)₂(s) in the presence of Cr(III) results in the formation of a spinel phase that is a solid solution between magnetite (Fe₃O₄) and chromite (FeCr₂O₄).

Encapsulation of nanoscale metal oxides into an ultra-thin Ni matrix for superior Li-ion batteries: a versatile strategy

Li-ion batteries' (LIBs) performance proves to be highly correlated with ionic and electrical transport kinetics in electrodes. Although continual progress has been achieved in rational design of ideal electrode systems, their energy density, cyclic endurance and productivity are still far from perfect for practical use. Herein we propose an interesting, facile and versatile strategy to encapsulate various nanoscale metal oxides (covering both nanopowders and nanostructured arrays) into an ultrathin Ni matrix (metal oxide@Ni) for superior LIBs. Evolutions of such metal oxide@Ni hybrids (taking MnO@Ni and CoO@Ni as models) are thoroughly studied by monitoring their whole fabrication process. Putting "armors" on nanoscale metal oxides is thought helpful for the promotion of the LIB performance since the outer Ni matrix provides both mechanical protection against huge volume changes and effective routes for electron transfer. As a proof-of-concept demonstration, all metal oxide@Ni hybrid electrodes exhibit drastic improvements in the capacity retention (e.g. ∼452% capacity rise for the MnO@Ni case while ∼551% for CoO@Ni NWs), long-term cyclic stability and rate capabilities. This designed strategy can be further extended to make other advanced oxide@metal hybrids, not only for LIBs but also for other potential fields.

Ultrathin nanosheets of feroxyhyte: a new two-dimensional material with robust ferromagnetic behavior

A new two dimensional nanomaterial with robust room-temperature ferromagnetic behavior has been synthesizedviaan atomic-scale topochemical transformation strategy.