Polycyclic Aromatic Hydrocarbons in drinking water of Tehran, Iran

Polycyclic aromatic hydrocarbon in community drinking water, Nsisioken, Nigeria: Source and health risk assessment

In 2011, the United Nations Environment Programme discovered high levels of hydrocarbon pollution in drinking water wells in Nsisioken Agbi Ogale Rivers State, Nigeria. However, the level of polycyclic aromatic hydrocarbons (PAHs) in the same community's water supply was unknown. A comprehensive study of PAHs in three household dug wells and three boreholes was conducted using Agilent 7890B gas chromatography and 5975A mass spectrometry. The detected PAHs were mainly 4 - 5 ringed PAHs, such as Chrysene, Fluoranthene, Pyrene, Benzo[a]anthracene, and Benzo[b]fluoranthene. The total mean concentration was 5.8 ± 2.3 μg/L, with values ranging from not detected in borehole 3 to 8.0 μg/L at well 2. Source identification analysis suggested that the PAHs originated from fuel and biomass combustion. The incremental lifetime cancer risk for children and adults due to groundwater ingestion and skin contact ranged from ND to 7.448 × 10-3 and ND to 1.83 × 10-3 respectively. The Risk index (RI) values from ingestion and dermal routes were 1.5 ×10-2 and 2.4 × 10-2, indicating high risk of cancer. The hazard quotient for the two non-carcinogenic PAHs was greater than 1, indicating high toxicity. The PAH concentrations exceeded the maximum contamination limits set by the World Health Organization and the U.S. environmental Protection Agency, highlighting potential health risks associated with water use in the community. Authorities should provide a safe alternative water source for the community.

Association between exposure to water sources contaminated with polycyclic aromatic hydrocarbons and cancer risk: A systematic review

The recent scientific focus on polycyclic aromatic hydrocarbons (PAHs) has stemmed from their recognized genotoxic, mutagenic, and carcinogenic properties. This systematic review seeks to evaluate the nexus between exposure to water sources contaminated with PAHs and the associated cancer risk among global populations, encompassing both children and adults. Web of Science (WoS), Cochrane Library, PubMed, ProQuest, Scopus, and Google Scholar, were searched following the PRISMA guidelines, until December 31, 2023. Quality assessment of the selected studies was performed using the Newcastle-Ottawa Scale. The increased lifetime cancer risk (ILCR) attributed to PAH exposure through ingestion and dermal absorption was thoroughly examined across diverse age groups. After extensive searching, screening, and eligibility, 30 articles were included in this review, which was conducted in different parts of the world, including Nigeria (n = 11), China (n = 7), India (n = 4), Iran (n = 3), South Africa (n = 2), Italy (n = 1), Colombia (n = 1), and Iraq (n = 1). Our analysis underscores Nigeria's alarming prevalence of PAH contamination in its rivers, groundwaters, and seawater. Remarkably, the highest cancer risk was identified among children and adults, notably in proximity to the Atlas Cove jetty (seawater) and various Nigerian rivers. This elevated risk is primarily attributed to the combined effects of ingestion and dermal absorption. Furthermore, our findings emphasize the prominent role of combustion-derived and pyrogenic sources of PAH in the examined aquatic ecosystems. This study unequivocally establishes that PAH-contaminated water sources significantly amplify the risk of cancer among both children and adults. The extent of risk variation is influenced by the specific water source, duration of exposure, and age group. Consequently, proactive identification of contaminated water sources and their pollution origins, coupled with targeted educational campaigns, holds promise for reducing the global burden of PAH-related cancer.

Aromatase (CYP19) gene as a biomarker for detection of naphthalene and phenanthrene in Colombo to Mirissa coastal water in Sri Lanka

Naphthalene (NAP) and phenanthrene (PHE) are prevalent Polycyclic Aromatic Hydrocarbons (PAHs) in the environment. High-Performance Liquid Chromatography (HPLC) analysis was performed on marine water samples (n = 57) collected from 19 locations. Molecular screening of the aromatase (CYP19) gene expression was examined using quantitative Reverse Transcriptase PCR (qRT-PCR). The findings of the study showed a significant range of naphthalene concentrations along the coastline, spanning from 1.70 to 15.05 mg/L, where phenanthrene concentrations varied from undetectable to a maximum of 5.36 mg/L. The relative expression of the CYP19 gene ranged from 0.5 to 13.9 in the sampling sites. The ANOVA analysis showed a significant positive correlation (p < 0.05) between the concentrations of PAHs and CYP19 gene expression. The study concluded that the CYP19 gene could be useful in detecting contaminants such as naphthalene and phenanthrene in water. This study may help develop effective strategies to detect and mitigate PAH pollution in coastal areas.

Occurrence and Health Risks of Organic Micropollutants in Tap Water in Dalian

Organic micropollutants (OMPs) in tap water may pose risks to human health. Previous studies on the potential health risks of OMPs in tap water may have underestimated the potential health risks of OMPs due to their limited coverage in target pollutants and incomplete toxicity data. In this study, tap water samples were collected in 37 sampling sites in Dalian, China. More than 1,200 target pollutants were screened by combining screening analysis and target analysis. A total of 93 OMPs were detected, with concentration summation ranging from 157 to 1.7 × 104 ng/L among different sampling sites. A total of 17 OMPs (12 agrochemicals, 3 pharmaceuticals and personal care products, and 2 other compounds) were detected in over 80% of the sampling sites. Especially, imidacloprid, tebuconazole, and atrazine-desethyl were found in all the sampling sites. Computational toxicology models were adopted to predict the missing toxicity threshold values of the identified chemicals. Noncarcinogenic risks were estimated to be negligible among all the sampling sites, while carcinogenic risks at six sites were above 10-6 but below 10-4, indicating non-negligible risks. Griseofulvin contributed the most to the carcinogenic risk. This study offers valuable insights that can guide future initiatives to safeguard tap water safety.

Hazards of polycyclic aromatic hydrocarbons: a review on occurrence, detection, and role of green nanomaterials on the removal of PAH from the water environment

Organic pollutant contamination in the environment is a serious and dangerous issue, especially for developing countries. Among all organic pollutants, polycyclic aromatic hydrocarbons (PAHs) are the more frequently discovered ones in the environment. PAH contamination is caused chiefly by anthropogenic sources, such as the disposal of residential and industrial waste and automobile air emissions. They are gaining interest due to their environmental persistence, toxicity, and probable bioaccumulation. The existence of PAHs may result in damage to the environment and living things, and there is widespread concern about the acute and chronic threats posed by the release of these contaminants. The detection and elimination of PAHs from wastewater have been the focus of numerous technological developments during recent decades. The development of sensitive and economical monitoring systems for detecting these substances has attracted a lot of scientific attention. Using several nanomaterials and nanocomposites is a promising treatment option for the identification and elimination of PAHs in aquatic ecosystems. This review elaborated on the sources of origin, pathogenicity, and widespread occurrence of PAHs. In addition, the paper highlighted the use of nanomaterial-based sensors in detecting PAHs from contaminated sites and nanomaterial-based absorbents in PAH elimination from wastewater. This review also addresses the development of Graphene and Biofunctionalized nanomaterials for the elimination of PAHs from the contaminated sites.

Impact of phenanthrene co-administration on the toxicokinetics of benzo[a]pyrene in humans. UPLC-accelerator mass spectrometry following oral microdosing

Current risk assessments for environmental carcinogens rely on animal studies utilizing doses orders of magnitude higher than actual human exposures. Epidemiological studies of people with high exposures (e.g., occupational) are of value, but rely on uncertain exposure data. In addition, exposures are typically not to a single chemical but to mixtures, such as polycyclic aromatic hydrocarbons (PAHs). The extremely high sensitivity of accelerator mass spectrometry (AMS) allows for dosing humans with known carcinogens with de minimus risk. In this study UPLC-AMS was used to assess the toxicokinetics of [14C]-benzo[a]pyrene ([14C]-BaP) when dosed alone or in a binary mixture with phenanthrene (Phe). Plasma was collected for 48 h following a dose of [14C]-BaP (50 ng, 5.4 nCi) or the same dose of [14C]-BaP plus Phe (1250 ng). Following the binary mixture, Cmax of [14C]-BaP significantly decreased (4.4-fold) whereas the volume of distribution (Vd) increased (2-fold). Further, the toxicokinetics of twelve [14C]-BaP metabolites provided evidence of little change in the metabolite profile of [14C]-BaP and the pattern was overall reduction consistent with reduced absorption (decrease in Cmax). Although Phe was shown to be a competitive inhibitor of the major hepatic cytochrome P-450 (CYP) responsible for metabolism of [14C]-BaP, CYP1A2, the high inhibition constant (Ki) and lack of any increase in unmetabolized [14C]-BaP in plasma makes this mechanism unlikely to be responsible. Rather, co-administration of Phe reduces the absorption of [14C]-BaP through a mechanism yet to be determined. This is the first study to provide evidence that, at actual environmental levels of exposure, the toxicokinetics of [14C]-BaP in humans is markedly altered by the presence of a second PAH, Phe, a common component of environmental PAH mixtures.

Effects of polycyclic aromatic hydrocarbons (PAHs) on pregnancy, placenta, and placental trophoblasts

Polycyclic aromatic hydrocarbons (PAHs) are a group of persistent organic pollutants that are carcinogenic, mutagenic, endocrine-toxic, and immunotoxic. PAHs can be found in maternal and fetal blood and in the placenta during pregnancy. They may thus affect placental and fetal development. Therefore, the exposure levels and toxic effects of PAHs in the placenta deserve further study and discussion. This review aims to summarize current knowledge on the effects of PAHs and their metabolites on pregnancy and birth outcomes and on placental trophoblast cells. A growing number of epidemiological studies detected PAH-DNA adducts as well as the 16 high-priority PAHs in the human placenta and showed that placental PAH exposure is associated with adverse fetal outcomes. Trophoblasts are important cells in the placenta and are involved in placental development and function. In vitro studies have shown that exposure to either PAH mixtures, benzo(a)pyrene (BaP) or BaP metabolite benzo(a)pyrene-7,8-dihydrodiol-9,10-epoxide (BPDE) affected trophoblast cell viability, differentiation, migration, and invasion through various signaling pathways. Furthermore, similar effects of BPDE on trophoblast cells could also be observed in BaP-treated mouse models and were related to miscarriage. Although the current data show that PAHs may affect placental trophoblast cells and pregnancy outcomes, further studies (population studies, in vitro studies, and animal studies) are necessary to show the specific effects of different PAHs on placental trophoblasts and pregnancy outcomes.

A critical insight into occurrence and fate of polycyclic aromatic hydrocarbons and their green remediation approaches

Over the last century, the tremendous growth in industrial activities particularly in the sectors of pharmaceuticals, petrochemicals and the reckless application of fertilizers and insecticides has raised the contamination of polyaromatic hydrocarbons (PAHs) tremendously. For more than a decade, the main focus of environmental experts is to come up with management approaches for the clean-up of sites polluted with PAHs. These are ubiquitous in nature i.e., widely distributed in ecosystem ranging from soil, air and marine water. Most of the PAHs possess immunotoxicity, carcinogenicity and genotoxicity. Being highly soluble in lipids, they are readily absorbed into the mammalian gastro intestinal tract. They are widely distributed with marked tendency of getting localized into body fat in varied tissues. Several remediation technologies have been tested for the removal of these environmental contaminants, particularly bioremediation has turned out to be a hope as the safest and cost-effective option. Therefore, this review first discusses various sources of PAHs, their effect on human health and interactions of PAHs with soils and sediments. In this review, a holistic insight of current scenario of existing remediation technologies and how they can be improvised along with the hindrances in the path of these technologies are properly addressed.

Characterization, sources, and risk assessment of PAHs in borehole water from the vicinity of an unlined dumpsite in Awka, Nigeria

Polycyclic aromatic hydrocarbons (PAHs) are contaminants of interest in the ecosystem due to associated health risks. Therefore, their detection in the environment is important. In this regard, the risk assessment of PAHs in borehole water near the unlined dumpsite in Anambra State was investigated. Samples of borehole water (16 each) were collected from the study and control areas during both seasons. The PAH concentrations in the borehole water samples were analyzed using gas chromatography. The mean PAH concentration in the study and control samples for the wet season varied from BL-7.65 µg/L to BL-2.98 µg/L, respectively. The study samples' dry season values ranged from BL to 3.33 µg/L, while control samples ranged from BL to 1.87 µg/L. [Formula: see text]PAHs for the wet and dry seasons varied from 5.8 to 13.94 µg/L and 4.25 to 10.09 µg/L for study and control samples, respectively. The four and five rings PAH were the most dominant group in the [Formula: see text] PAHs for the study and control samples, respectively. Diagnostic ratios suggested pyrolytic and petrogenic sources for both locations. The cluster analysis showed different sources of the congeners in the samples. The non-carcinogenic risk showed no possibility of risks via dermal and ingestion routes. In addition, the possibility of cancer risks via ingestion routes was doubtful. The carcinogenic risk index through dermal contact exceeded the acceptable limit for adults and is at a tolerable limit for children, indicating potential threats to humans, with adults more susceptible to cancer risks. Therefore, this study recommends that sanitary dumpsites be constructed for waste disposal and implementation of environmental laws to prevent underground water pollution and the environment.

Polyaromatic hydrocarbons (PAHs) in the water environment: A review on toxicity, microbial biodegradation, systematic biological advancements, and environmental fate

Polycyclic aromatic hydrocarbons (PAHs) are considered a major class of organic contaminants or pollutants, which are poisonous, mutagenic, genotoxic, and/or carcinogenic. Due to their ubiquitous occurrence and recalcitrance, PAHs-related pollution possesses significant public health and environmental concerns. Increasing the understanding of PAHs' negative impacts on ecosystems and human health has encouraged more researchers to focus on eliminating these pollutants from the environment. Nutrients available in the aqueous phase, the amount and type of microbes in the culture, and the PAHs' nature and molecular characteristics are the common factors influencing the microbial breakdown of PAHs. In recent decades, microbial community analyses, biochemical pathways, enzyme systems, gene organization, and genetic regulation related to PAH degradation have been intensively researched. Although xenobiotic-degrading microbes have a lot of potential for restoring the damaged ecosystems in a cost-effective and efficient manner, their role and strength to eliminate the refractory PAH compounds using innovative technologies are still to be explored. Recent analytical biochemistry and genetically engineered technologies have aided in improving the effectiveness of PAHs' breakdown by microorganisms, creating and developing advanced bioremediation techniques. Optimizing the key characteristics like the adsorption, bioavailability, and mass transfer of PAH boosts the microorganisms' bioremediation performance, especially in the natural aquatic water bodies. This review's primary goal is to provide an understanding of recent information about how PAHs are degraded and/or transformed in the aquatic environment by halophilic archaea, bacteria, algae, and fungi. Furthermore, the removal mechanisms of PAH in the marine/aquatic environment are discussed in terms of the recent systemic advancements in microbial degradation methodologies. The review outputs would assist in facilitating the development of new insights into PAH bioremediation.

The shifting research landscape for PAH bioremediation in water environment: a bibliometric analysis on three decades of development

Polycyclic aromatic hydrocarbons (PAHs) with their carcinogenic, teratogenic, and mutagenic effects can cause great damage to the ecosystem and public health when present in water. With bioremediation, PAH contamination in water environment can be greatly reduced in an eco-friendly manner. It has thus become the research focus for many environmental scientists. In this study, a bibliometric analysis on three-decade (1990-2022) development of PAH bioremediation in water environment was conducted from temporal and spatial dimensions using CiteSpace. A total of 2480 publications, obtained from Web of Science core collection database, were used to explore the basic characteristics, hotspots, and prospects of the research area. The results showed that (1) bioremediation/biodegradation of PAHs in water environment has been getting researchers' attention since 1990, and is gaining even more traction as time goes on. (2) In terms of countries, China and the USA were the major contributors in this research area, while at the institutional level, the Chinese Academy of Sciences has produced the most research results. However, international cooperation across regions was lacking in the field. (3) Environment Science and Technology, Chemosphere, Applied and Environment Microbiology, Journal of Hazardous Materials, and Environment Pollution were the 5 most cited journals in this field. (4) There were three major stages the field has gone through, each with distinct research hotspots, including initial stage (1990-1994), mechanism investigation (1995-2000), and application exploration (2001-2010; 2011-2022). Finally, research perspectives were proposed, covering three directions, namely, bioavailability, immobilization, and viable but nonculturable (VBNC) bacteria.

Wildfire impacts on surface water quality parameters: Cause of data variability and reporting needs

Surface runoff mobilizes the burned residues and ashes produced during wildfires and deposits them in surface waters, thereby deteriorating water quality. A lack of a consistent reporting protocol precludes a quantitative understanding of how and to what extent wildfire may affect the water quality of surface waters. This study aims to analyze reported pre- and post-fire water quality data to inform the data reporting and highlight research opportunities. A comparison of the pre-and post-fire water quality data from 44 studies reveals that wildfire could increase the concentration of many pollutants by two orders of magnitude. However, the concentration increase is sensitive to when the sample was taken after the wildfire, the wildfire burned area, discharge rate in the surface water bodies where samples were collected, and pollutant type. Increases in burned areas disproportionally increased total suspended solids (TSS) concentration, indicating TSS concentration is dependent on the source area. Increases in surface water flow up to 10 m³ s^-1 increased TSS concentration but any further increase in flow rate decreased TSS concentration, potentially due to dilution. Nutrients and suspended solids concentrations increase within a year after the wildfire, whereas peaks for heavy metals occur after 1-2 years of wildfire, indicating a delay in the leaching of heavy metals compared to nutrients from wildfire-affected areas. The concentration of polycyclic aromatic hydrocarbons (PAHs) was greatest within a year post-fire but did not exceed the surface water quality limits. The analysis also revealed inconsistency in the existing sampling protocols and provides a guideline for a modified protocol along with highlighting new research opportunities. Overall, this study underlines the need for consistent reporting of post-fire water quality data along with environmental factors that could affect the data so that the post-fire water quality can be assessed or compared between studies.

Leveraging Multiple Data Streams for Prioritization of Mixtures for Hazard Characterization

There is a growing need to establish alternative approaches for mixture safety assessment of polycyclic aromatic hydrocarbons (PAHs). Due to limitations with current component-based approaches, and the lack of established methods for using whole mixtures, a promising alternative is to use sufficiently similar mixtures; although, an established framework is lacking. In this study, several approaches are explored to form sufficiently similar mixtures. Multiple data streams including environmental concentrations and empirically and predicted toxicity data for cancer and non-cancer endpoints were used to prioritize chemical components for mixture formations. Air samplers were analyzed for unsubstituted and alkylated PAHs. A synthetic mixture of identified PAHs was created (Creosote-Fire Mix). Existing toxicity values and chemical concentrations were incorporated to identify hazardous components in the Creosote-Fire Mix. Sufficiently similar mixtures of the Creosote-Fire Mix were formed based on (1) relative abundance; (2) toxicity values; and (3) a combination approach incorporating toxicity and abundance. Hazard characterization of these mixtures was performed using high-throughput screening in primary normal human bronchial epithelium (NHBE) and zebrafish. Differences in chemical composition and potency were observed between mixture formation approaches. The toxicity-based approach (Tox Mix) was the most potent mixture in both models. The combination approach (Weighted-Tox Mix) was determined to be the ideal approach due its ability to prioritize chemicals with high exposure and hazard potential.

Removal of polycyclic aromatic hydrocarbons (PAHs) from water through degradable polycaprolactone electrospun membrane

Polycyclic aromatic hydrocarbons (PAHs) are common and persistent environmental pollutants produced during the incomplete combustion of fuels. They are known for their carcinogenic and mutagenic properties. Thus, their removal from water bodies is highly crucial and has become a critical issue globally. As a solution, here an electrospun polycaprolactone (PCL) membrane with a mean fiber diameter of 2.74 ± 1.3 μm was produced by electrospinning. Water contact angle (WCA) analysis confirmed the hydrophobic nature of the PCL membrane with a WCA of 124°, which remained stable over time. Differential scanning calorimetry analysis (DSC) revealed the semicrystalline nature of the membrane with the respective melting temperature (Tm) of 61.5 °C and crystallization temperature (Tc) of 29.6 °C. X-ray diffraction (XRD) analysis demonstrated that the crystalline structure of the PCL membrane could be preserved after electrospinning. Scanning electron microscopy analysis revealed that the membrane could be stretched without any rupture. The PCL membrane was used to scavenge PAHs (i.e. phenanthrene and anthracene) from water; the membrane could reach equilibrium capacity in a few hours, demonstrating the rapid removal of PAHs from water. The adsorption capacities for anthracene and phenanthrene were found to be 173 ± 17 and 560 ± 51 μg/g, respectively. The adsorption data fitted well with the pseudo-first-order kinetics model for both PAH molecules. The sorption could be attributed to hydrophobic adsorption, which allowed using the PCL membrane repeatedly with ethanol exposure to get rid of the adsorbed PAHs from the membrane's surface. The partial degradation of the fibrous membrane in water was observed due to their hydrolysis-induced bulk erosion. However, the degradation was slow for the membrane kept in the air for 3 months. Overall, the PCL membrane with inherent biocompatibility, biodegradability, and good PAH sorption performance is a promising material for water depollution from toxic PAH compounds.

Assessment of reusable graphene wool adsorbent for the simultaneous removal of selected 2-6 ringed polycyclic aromatic hydrocarbons from aqueous solution

The United States Environmental Protection Agency categorized polycyclic aromatic hydrocarbons (PAHs) as hazardous to humans upon acute and/or chronic exposure. This study investigated the simultaneous adsorption of several PAHs onto graphene wool (GW), thereby providing holistic insights into the competitive adsorption of PAHs onto graphene-based materials. SEM, TEM and FTIR provided evidence for the adsorption of PAHs and successful regeneration of the adsorbent accompanied by distinct morphological changes. Isotherm experiments revealed that adsorption of PAHs was significantly influenced by hydrophobic interactions between the sorbate and hydrophobic surface of GW. The Freundlich multilayer isotherm model best fit the experimental data obtained for both multi-component PAH and single-solute experiments as indicated by the Error Sum of Squares (SSE) obtained from nonlinear regression analysis. Experiments revealed that competitive adsorption had a limiting effect on the overall adsorption capacity as q_max and K_d were higher in single-solute than multi-component PAH experiments. The results suggest that partition distribution coefficients (K_d) between the solid-liquid interphase played a significant role in the overall adsorption and a positive correlation between K_d and LogK_ow of PAHs was established in single-solute experiments. Sorption-desorption experiments revealed that PAHs were adsorbed with a maximum removal efficiency of 100% at an optimum GW dosage of 2 g/L. Adsorption thermodynamics revealed that PAH adsorption onto GW is spontaneous and endothermic. The adsorbent was regenerated and reused for up to six times and its efficiency remained fairly constant.

Removal of polycyclic aromatic hydrocarbons (PAHs) in conventional drinking water treatment processes

The presence of polycyclic aromatic hydrocarbons (PAHs) in water poses a serious threat to the human health due to their toxic effects. Therefore, the removal of these compounds from drinking water in Potable Water Treatment Plants (PWTPs) should be evaluated and optimized to assure the quality of water intended for human consumption. In this work, changes in PAHs levels during drinking water treatment processes have been monitored to evaluate the effectiveness of conventional processes in the removal of these recalcitrant pollutants. Several chemical treatment methods based on the addition of KMnO₄, FeCl₃ and NaClO were evaluated through jar tests. The analysis of PAH content of aqueous samples was carried out by gas chromatography coupled with mass spectrometry. The highest removal efficiency, over 90%, was obtained for benzo(a)anthracene, benzo(a)pyrene and dibenzo(a,h)anthracene. The most recalcitrant compounds to degradation were fluorene, anthracene, phenanthrene and flouranthene with reduction rates between 45 and 57%. The conventional treatment processes assessed have been proved to be effective reducing the PAH below the legal limits of drinking water quality. The definition of a parameter based on chemical properties of PAHs, i.e., sorption capacity and energy required to remove an electron, enabled the prediction of removal rate of pollutants which represents a valuable information for the plant operation.

Seasonal variations of polycyclic aromatic hydrocarbons in coastal sediments of a marine resource hot spot: the case of pars special economic energy zone, Iran

Polycyclic aromatic hydrocarbons (PAHs) are an important group of compounds of major environmental concern, which are in the class of persistent organic pollutants. Therefore, the key purpose of this research was to analyze seasonal fluctuations and to determine the probability of polycyclic aromatic hydrocarbons in coastal sediments of the Iranian Marine Resource Center based on the evaluation of 16 US-EPA important PAH compounds. These compounds have been collected from intertidal sediments located in the marine resources of southern Iran in different seasons. These samples of the surficial sediment were collected at the PSEEZ area using a stainless steel grab sampler in four seasons, from depths between 0.5 and 30 m. Surface sediment samples were removed by spoons and carefully placed in an aluminum foil; they were taken to the laboratory on ice and held at 20° C until their study. After extraction, by using a rotary evaporator apparatus, samples were condensed. The assay was added to roughly 2 g of activated copper flasks in the refrigerator for 36 h for desulfurization. Among different seasons, the highest concentration was observed in winter, with a mean of 281.3 ng g^-1. According to ecological risk assessment (concentrations of possible effects, low effect range, degree of threshold effects, and median effect range), PAH risks in surface sediments of PSEEZ were lower than the threshold results levels (TEL), possible effects levels (PEL), low range of effects (ERL), and median range of effects (ERM), indicating that a biological effect would rarely occur. The dry weight scale of the concentration of ∑PAHs ranges from 145.7 to 348.42 ng g^-1 with a mean quantity of 260.52 ng g^-1. Therefore, according to the amount of ∑PAH concentration, the sediments in the PSEEZ area indicated moderate to heavy pollutions. In this way, the sedimentary surface ecosystems of the Persian Gulf were considered as moderately polluted compared with other ecosystems worldwide. Our study highlighted some of the research gaps in PAH contamination studies and the level of PAH contamination. Therefore, this study will provide a scientific background, planning, and policies for PAH pollution control and environmental protection in Iran and similar regions around the world.

Thyroid disrupting effects of low-dose dibenzothiophene and cadmium in single or concurrent exposure: New evidence from a translational zebrafish model

Thyroid hormones (THs) are major regulators of biological processes essential for correct development and energy homeostasis. Although thyroid disruptors can deeply affect human health, the impact of exogenous chemicals and in particular mixture of chemicals on different aspects of thyroid development and metabolism is not yet fully understood. In this study we have used the highly versatile zebrafish model to assess the thyroid axis disrupting effects of cadmium (Cd) and dibenzothiophene (DBT), two environmental endocrine disruptors found to be significantly correlated in epidemiological co-exposure studies. Zebrafish embryos (5hpf) were exposed to low concentrations of Cd (from 0.05 to 2 μM) and DBT (from 0.05 to 1 μM) and to mixtures of them. A multilevel assessment of the pollutant effects has been obtained by combining in vivo morphological analyses allowed by the use of transgenic fluorescent lines with liquid chromatography mass spectrometry determination of TH levels and quantification of the expression levels of key genes involved in the Hypothalamic-Pituitary-Thyroid Axis (HPTA) and TH metabolism. Our results underscore for the first time an important synergistic toxic effect of these pollutants on embryonic development and thyroid morphology highlighting differences in the mechanisms through which they can adversely impact on multiple physiological processes of the HPTA and TH disposal influencing also heart geometry and function.

Health Risk Assessment, Composition, and Distribution of Polycyclic Aromatic Hydrocarbons (PAHs) in Drinking Water of Southern Jharkhand, East India

The studies on polycyclic aromatic hydrocarbons (PAHs) occurrence, distribution, health risk, and composition in drinking water are limited in India and worldwide. The main objective of this study was to find the contaminant sources, composition, health risk, and distribution of USEPA's 16 priority pollutant PAHs in the drinking water samples collected between July 2019 to September 2019 from six districts of Southern Jharkhand. The Σ_16PAHs mean ± standard deviation [SD] concentration values were ordered as East Singhbhum (ES) (21.5 ± 14.8 ng L^-1) > West Singhbhum (WS) (16.57 ± 13.21 ng L^-1) > Saraikela Kharsawan (SK) (11.48 ± 9.92 ng L^-1) > Khunti (KH) (10.32 ± 9.09 ng L^-1) > Simdega (SM) (9.96 ± 7.85 ng L^-1) > Gumla (GU) (9.41 ± 8.63 ng L^-1). The results show that ES and WS districts' groundwater samples were more contaminated by the PAHs, which may be attributed to the presence of many small-, medium-, and large-scale industries and high vehicular density in these districts. The concentrations of lower molecular weight ring (3-rings) and middle molecular weight ring (4-rings) PAHs were dominant throughout all drinking samples. The concentration of the 3-ring PAH Anthracene and 4-ring PAH Fluoranthene were dominant in all districts. The molecular ratios suggested that the potential sources of PAHs are fuel combustion and coal, grass, and wood burning. Risk assessment shows that the incremental lifetime cancer risk and risk index (RI) were ranged from 0.02 × 10^-10 to 4.93 × 10^-10 for children and 0.01 × 10^-10 to 2.98 × 10^-10 for adults. The RI values for seven carcinogenic PAHs were 8.83 × 10^-10 for children and 7.38 × 10^-10 for adults. Although the carcinogenic risks were within the permissible values, chronic exposure to PAHs through the ingestion of drinking water could still be a human health concern.

Bottled water safety evaluations in IRAN: determination of bromide and oxyhalides (chlorite, chlorate, bromate) by ion chromatography

Bottled water is most well liked within the world and attention is drawn due to its health issues. Oxyhalides is one amongst the foremost important by-products in bottled water which is produced by disinfection process such as "ozonation". International standards have been set and justified to permissible levels for chlorate, chlorite and bromate as 700, 700 and 10 μg/l. Thereafter, 168 samples of bottled water (mineral and drinking water) from Iran market obtained with the optimal working conditions and analyzed by ion chromatography (IC) with conductivity detector. The results actuated that 23 and 17 out of 168 samples as mineral and drinking water revealed bromate content in charge of the national permissible level, found as the mean level of 37.04 and 33.58 μg/l, respectively. According to risk assessment results, the average of hazard quotient (HQ) and lifetime excess cancer (ELCR) were calculated 6.955 × 10^-3 and 0.25 × 10^-3, respectively. Thereupon, it is indispensable to control as well as make consumers aware of oxyholides hazard especially bromate following governmental authorities with an insight to health sectors monitoring guidelines due to its obvious harmful effects and aspects on health issues.

Polycyclic Aromatic Hydrocarbons: Occurrence, Electroanalysis, Challenges, and Future Outlooks

The past several decades have seen increasing concern regarding the wide distribution of polycyclic aromatic hydrocarbons (PAHs) in environmental matrices. Primary toxicological data show PAHs' persistent characteristics and possible toxicity effects. Because of this pressing global issue, electroanalytical methods have been introduced. These methods are effective for PAH determination in environmental waters, even outclassing sophisticated analytical techniques such as chromatography, conventional spectrophotometry, fluorescence, and capillary electrophoresis. Herein, the literature published on PAHs is reviewed and discussed with special regard to PAH occurrence. Moreover, the recent developments in electrochemical sensors for PAH determination and the challenges and future outlooks in this field, are also presented.

Occurrence of seventy-nine SVOCs in tapwater of China based on high throughput organic analysis testing combined with high volume solid phase extraction

Semi-volatile organic compounds (SVOCs) are ubiquitous and toxic environmental pollutants, and have recently attracted much research attention. However, their occurrence in tapwater and the associated potential health risks have not been thoroughly studied. This work examined 26 household tapwater samples collected in 26 Chinese cities during August and September 2019. Concentrations of 79 SVOCs, including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), and polychlorobenzenes (CBs), were determined using an emerging method of high throughput organic analysis testing combined with high volume solid phase extraction (Hi-throat/Hi-volume SPE). Total concentrations of PAHs, PCBs, OCPs, and CBs were in the ranges 8.70-103 ng L^-1 (average 42.1 ng L^-1), 61.6-434 pg L^-1 (average 274 pg L^-1), 13.1-266 pg L^-1 (average 59.8 pg L^-1), and 3.5-83.0 pg L^-1 (average 13.8 pg L^-1), respectively. PAHs were the dominant SVOCs, with concentrations 10-100 times those of PCBs, OCPs, and CBs. All the studied SVOCs had concentrations deemed acceptable by Chinese national tapwater standards. These measured SVOCs displayed little spatial variation across China, but were significantly correlated with the size of the economy and population of each city. The human non-carcinogenic and carcinogenic risks associated with the studied SVOCs in Chinese tapwater are negligible.

Design, Simulation, and Environmental Assessment of an Adsorption-Based Treatment Process for the Removal of Polycyclic Aromatic Hydrocarbons (PAHs) from Seawater and Sediments in North Colombia

The presence of marine pollution in Cartagena Bay (Colombia) is an alarming environmental issue because of the ecotoxicological properties of contaminants such as polycyclic aromatic hydrocarbons (PAHs) that may affect the biodiversity of coastal ecosystems. In this sense, there is a need to propose alternatives to remediate the environmental pollution of such bodies of water. The aim of this work was to design an adsorption-based treatment process for the removal of PAHs from seawater and sediments. Two design cases were considered: (i) a base process without a PAH desorption unit and (ii) an alternative process including a PAH desorption unit. Both designs were simulated using Aspen Plus to obtain mass and energy balances. A parametric sensitivity analysis was carried out to determine optimum operating conditions for solvent recovery and treatment efficiency. The pressure and temperature of evaporators were selected as key parameters, as well as PAH loads in the influent. The environmental performance of base and alternative designs was also evaluated via waste reduction algorithm (WAR) methodology. A maximum recovered solvent flow rate was found when the evaporator operates at 56 °C and 0.81-0.83 atm. In addition, the total generation rate of potential environmental impacts (PEI) reported negative values for cases 1, 3, and 4 (-9.80 × 10^-1, -9.25 × 10⁺¹, -1.19 × 10⁺¹, and 1.04 × 10⁺¹ PEI/h). The major concern derived from this analysis is the high environmental impacts reached by the photochemical oxidation potential (PCOP) category associated with the use of hexane and acetone as solvents during PAH removal from sediments. In general, both designs of seawater and sediment treatment seem to be an environmentally friendly alternative for marine pollution remediation.

Distribution, Compositional Pattern and Potential to human exposure of PAHs in Water, Amassoma axis, Nun River, Bayelsa State, Nigeria

This study was carried out to investigate the distribution and contents of sixteen priority polycyclic aromatic hydrocarbons (PAHs) in water from Amassoma axis of the Nun River, Bayelsa State, Nigeria. The PAH contaminations in the river water samples was performed using GC-MS method. The results were similar for all of the three sampling stations. Six LMW PAHs: naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene and five HMW PAHs: fluoranthene, pyrene benzo (a)anthracene, chrysene and benzo(a)pyrene were found. The ∑ PAHs concentration ranged from 0.111mg/L to 0.26mg/L. In this study, PAH fingerprint ratios for determining both petrogenic and pyrogenic (pyrolytic) PAH accumulation in the environment and Toxic equivalency factor (TEF) used to estimate relative toxicity of a PAH compared to that of BaP was employed. The Ph/An ratio for water samples were 0.00, 0.33 and 0.00 in three stations, while associated figures for Fl/Py ratio values were 0.67, 0.83 and 0.50 respectively. Pearson correlation matrice analysis reveals a positive correlation between the PAHs; this could indicate a common source for some of the PAHs, however, some were negatively correlated with each other. This behavior could indicate non-point source. A comparative analysis of PAHs concentrations in the water samples with WHO standards revealed that the results obtained in this study were within the permissible levels, however, carcinogen PAHs present in the water of the Amassoma axis, Nun River may pose a threats to human health.

Comprehensive review of polycyclic aromatic hydrocarbons in water sources, their effects and treatments

Polycyclic aromatic hydrocarbons (PAHs) are principally derived from the incomplete combustion of fossil fuels. This study investigated the occurrence of PAHs in aquatic environments around the world, their effects on the environment and humans, and methods for their removal. Polycyclic aromatic hydrocarbons have a great negative impact on the humans and environment, and can even cause cancer in humans. Use of good methods and equipment are essential to monitoring PAHs, and GC/MS and HPLC are usually used for their analysis in aqueous solutions. In aquatic environments, the PAHs concentrations range widely from 0.03 ng/L (seawater; Southeastern Japan Sea, Japan) to 8,310,000 ng/L (Domestic Wastewater Treatment Plant, Siloam, South Africa). Moreover, bioaccumulation of ∑16PAHs in fish has been reported to range from 11.2 ng/L (Cynoscion guatucupa, South Africa) to 4207.5 ng/L (Saurida undosquamis, Egypt). Several biological, physical and chemical and biological techniques have been reported to treat water contaminated by PAHs, but adsorption and combined treatment methods have shown better removal performance, with some methods removing up to 99.99% of PAHs.

Determination of polycyclic aromatic hydrocarbons (PAHs) in drinking water of Samsun and it's surrounding areas, Turkey

BACKGROUND

Polycyclic aromatic hydrocarbons (PAH) are considered to be one of the major contaminants of drinking water and natural water bodies. Some of the well documented polycyclic aromatic hydrocarbons that are water pollutants and were considered for analysis in this study included benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), benzo[g,h,i]perylene (BgP), and indeno[1,2,3-c,d]pyrene (InD). This study aimed at determining the levels of concentrations of basically five polycyclic aromatic hydrocarbons in 57 drinking water bodies located around Samsun, Ordu, Giresun, Çorum, Amasya, Kastamonu and Sinop provinces.

MATERIALS AND METHOD

In this study, the Environmental Protection Agency (EPA) method 550.1 for the determination of polycyclic aromatic hydrocarbons in drinking by Liquid-Solid Extraction (LSE) and High Performance Liquid Chromatography (HPLC) with Coupled Ultraviolet (CD) and Fluorescence Detection (FD) was used. Sampling procedures were done according to the validated method specified by the Turkish Ministry of Enivironment and Forestry. Prior to the determination of concentrations by HPLC, PAHs contained in the samples were separated from the solid phase by Solid-Phase Extraction (SPE). All data analyses were conducted using SPSS and Excel.

RESULTS

Obtained results from the investigation revealed that the average total PAH and benzo[a]pyrene (BaP) concentration levels in drinking water samples taken from the central districts of Samsun were 2.73 ± 1.51 and 0.35 ± 0.24 ng/L respectively. In drinking water samples taken from Ordu, Giresun, Çorum, Amasya, Kastamonu and Sinop, the average total PAH concentrations were found to be 5.85 ± 3.82 ng/L, 3.79 ± 1.27 ng/L, 1.08 ± 0.62 ng/L, 2.42 ± 1.04 ng/L; 1.92 ± 0.35 ng/L and 4.07 ± 2.33 ng/L respectively. The average (BaP) concentrations for the same named locations were determined as 0.97 ± 0.75 ng/L; 0.55 ± 0.29 ng/L; 0.11 ± 0.08 ng/L; 0.35 ± 0.10 ng/L; 0.14 ± 0.04 ng/L; 0.39 ± 0.23 ng/L, respectively. It is therefore evident that the values ​​of PAH and BaP in drinking water were below the limits of 100 and 10 ng/L ​​specified in the Regulation on Water Intended for Human Consumption. These values are below the set limits proposed by Turkish legislation and WHO.

CONCLUSION

All the results for drinking water, usable water and natural spring water were below the values ​​specified in the Regulation on Water Intended for Human Consumption and WHO. The PAH content of the studied river waters as well were below the limits proposed by Turkish legislation and WHO.

Pollution of polycyclic aromatic hydrocarbons (PAHs) in drinking water of China: Composition, distribution and influencing factors

Polycyclic aromatic hydrocarbons (PAHs) are a kind of persistent toxic substances, which have been frequently detected in environmental media. However, studies on their occurrences and distributions in drinking water are insufficient and their composition profiles in drinking water are still not clear. In this study, we investigated 16 priority polycyclic aromatic hydrocarbons (PAHs) in drinking water from different administrative level cities throughout mainland China, analyzed the influences of anthropogenic activities on PAHs, and assessed the health risk of the PAHs in drinking water. On the national scale, the sum concentration of the 16 priority-controlled PAHs (∑₁₆PAHs) designated by the U.S. Environmental Protection Agency (USEPA) was in a range of 3.89-231.39 (mean 56.25) ng L^-1. With the decline of ∑₁₆PAHs, the concentration of 3-ring PAHs decreased, while its proportion increased, indicating 3-ring PAHs might be more difficult to remove than other PAHs in drinking water. The geographical distribution of PAHs in drinking water of China was in a descending order of West (69.81 ng L^-1) > South (61.95 ng L^-1) > North (58.63 ng L^-1) > East (39.21 ng L^-1) > Northeast China (37.93 ng L^-1). ∑₁₆PAHs in drinking water of Prefecture-level City was the greatest (71.49 ng L^-1) followed by Provincial Capital (52.12 ng L^-1), County-level City (50.98 ng L^-1) and Municipality (33.92 ng L^-1). ∑₁₆PAHs was significantly negatively correlated with the per capita GDP of sampling city (P < 0.01, n = 78), implying that waterworks is an effective way to control and reduce PAH pollution in drinking water. The carcinogenic risk of the 16 PAHs in drinking water of China was much greater than the non-carcinogenic risk.

The Relation between Polymorphisms in Exon 5 and Exon 6 of GSTP1 Gene and the Risk of Lung Cancer in Iranian People

Objective:

The GSTP1 gene, which is located on chromosome 11q13, consists of 7 exons and 6 introns. There are two polymorphisms in GSTP1 that have been exposed to a transposition for codon 105 (Ile/Val) and 114 (Ala/Val) in exons 5 and 6, which have been studied previously in relation to lung cancer. Since the level of GSTP1 expression in lung tissues and other human epithelial tissues is high, GSTP1Val-105 polymorphism is recognized as a sensitive factor for tobacco-related cancers, especially lung cancer.

Methods:

One hundred and twenty tissue block samples of patients with lung cancers and 120 peripheral blood samples of the control group were obtained from two referral cancer centers in Tehran, Iran, from 2011 to 2016. Genomic DNA was extracted from tissue blocks and buffy coat of study cases to detect SNP of GSTP1 gene using Tetra-primer ARMS-PCR.

Results:

There was a notable correlation between the incidence of lung cancer and variant Val105 (P-value=0.001; OR=2/6; 95% CI=1.49-4.53) and Ile105 (P-value=0.003; OR=0.41; 95% CI=0.23-0.73). The odds ratio for lung cancer in the homozygous Ile105/Ile105 genotype was 3.56 times higher than that of individual with heterozygous Ile105/Val105 (P-value<0.001; OR=3/56; 95% CI=1.826-6.934) genotype, that was statistically significant. Furthermore, the results showed that there was no significant correlation between Ala114/Val114 genotypes and lung cancer. The BC (P-value=0.007; OR=0.16; 95% CI=0.04-0.61) and AA (P=0.001) genotypes were statistically significant (P-value <0.05); and for those who had AA genotype, the odds ratio was almost six times higher than those with BC genotype.

Conclusions:

The study of GSTP1 polymorphisms indicated that unlike the polymorphism in exon 5, the GSTP1 exon 6 polymorphism correlated with the lung cancer risk in the select group of Iranian people. Likewise, the potential use of this genetic polymorphism as a lung cancer predictor is confirmed.

Presence and Spatial Distribution of Polynuclear Aromatic Hydrocarbons (PAHs) in Groundwater of Merida City, Yucatan, Mexico

The karstic aquifer of Yucatan features a high permeability, therefore, all contaminants placed in the soil surface, can reach it through infiltration along with the rain water. The purpose of the present study is to determine the spatial distribution of the aromatic hydrocarbons in the underground water of Merida City. Fifty wells inside the city were sampled. The sampling took place during the dry season, from October 2007 to March 2008. Liquid-liquid Hydrocarbon extraction was performed using hexane and purification was made by previously packed chromatography columns. Regarding the occurrence of polynuclear aromatic hydrocarbon (PAHs) traces, 28 water samples (56%) contained residues of these compounds. The following PAHs presented the highest concentrations: benzo(a)anthracene y benzo(k)fluoranthene 13.26 and 7.88 µg L^-1 respectively. Only three of the sampled wells showed levels above those allowed by EPA and WHO norms. The origin of these compounds is mainly pyrogenic.

Effective solid phase extraction using centrifugation combined with a vacuum-based method for ambient gaseous PAHs

The developed SPE clean-up procedure provides much better efficiency for a group of low molecular weight PAHs than the conventional procedure. It is therefore appropriate for extraction of gaseous PAHs from ambient air samples.

Physico-chemical parameters and levels of polycyclic aromatic hydrocarbons in water, sediments and soil in River Nzoia, Kakamega county-Kenya

The River Nzoia basin is the main source of water for domestic, agricultural, and industrial activities. The levels of the priority polycyclic aromatic hydrocarbons (PAHs) in water, soil, and sediments of River Nzoia during two seasons are reported. The physico-chemical parameters gave levels that were within the maximum allowable limit but with significant differences between the wet and dry seasons (p < 0.005). In water (max: 0.092 ± 0.003 ng/L) and soils (max 9.74 ± 1.97 ng/g), levels were significantly higher in the wet season unlike in sediment (8.94 ± 3.33 ng/g). Although all levels were below the recommended limits, the results form a need basis for continuous monitoring as recommended by WHO and USEPA.

Upregulation of glycolysis and oxidative phosphorylation in benzo[α]pyrene and arsenic-induced rat lung epithelial transformed cells

Arsenic and benzo[β]pyrene (B[a]P) are common contaminants in developing countries. Many studies have investigated the consequences of arsenic and/or B[a]P-induced cellular transformation, including altered metabolism. In the present study, we show that, in addition to elevated glycolysis, B[a]P/arsenic-induced transformation also stimulates oxidative phosphorylation (OXPHOS). Proteomic data and immunoblot studies demonstrated that enzymatic activities, involved in both glycolysis and OXPHOS, are upregulated in the primary transformed rat lung epithelial cell (TLEC) culture, as well as in subcloned TLEC cell lines (TMCs), indicating that OXPHOS was active and still contributed to energy production. LEC expression, of the glycolytic enzyme phosphoglycerate mutase (PGAM) and the TCA cycle enzyme alpha-ketoglutarate dehydrogenase (OGDH), revealed an alternating cyclic pattern of glycolysis and OXPHOS during cell transformation. We also found that the expression levels of hypoxia-inducible factor-1β were consistent with the pattern of glycolysis during the course of transformation. Low doses of an ATP synthase inhibitor depleted endogenous ATP levels to a greater extent in TLECs, compared to parental LECs, indicating greater sensitivity of B[a]P/arsenic-transformed cells to ATP depletion. However, TLEC cells exhibited better survival under hypoxia, possibly due to further induction of anaerobic glycolysis. Collectively, our data indicate that B[a]P/arsenic-transformed cells can maintain energy production through upregulation of both glycolysis and OXPHOS. Selective inhibition of metabolic pathways may serve as a therapeutic option for cancer therapy.

Polycyclic Aromatic Hydrocarbons: A Critical Review of Environmental Occurrence and Bioremediation

The degree of polycyclic aromatic hydrocarbon contamination of environmental matrices has increased over the last several years due to increase in industrial activities. Interest has surrounded the occurrence and distribution of polycyclic aromatic hydrocarbons for many decades because they pose a serious threat to the health of humans and ecosystems. The importance of the need for sustainable abatement strategies to alleviate contamination therefore cannot be overemphasised, as daily human activities continue to create pollution from polycyclic aromatic hydrocarbons and impact the natural environment. Globally, attempts have been made to design treatment schemes for the remediation and restoration of contaminated sites. Several techniques and technologies have been proposed and tested over time, the majority of which have significant limitations. This has necessitated research into environmentally friendly and cost-effective clean-up techniques. Bioremediation is an appealing option that has been extensively researched and adopted as it has been proven to be relatively cost-effective, environmentally friendly and is publicly accepted. In this review, the physicochemical properties of some priority polycyclic aromatic hydrocarbons, as well as the pathways and mechanisms through which they enter the soil, river systems, drinking water, groundwater and food are succinctly examined. Their effects on human health, other living organisms, the aquatic ecosystem, as well as soil microbiota are also elucidated. The persistence and bioavailability of polycyclic aromatic hydrocarbons are discussed as well, as they are important factors that influence the rate, efficiency and overall success of remediation. Bioremediation (aerobic and anaerobic), use of biosurfactants and bioreactors, as well as the roles of biofilms in the biological treatment of polycyclic aromatic hydrocarbons are also explored.

Carcinogen Risk Assessment of Polycyclic Aromatic Hydrocarbons in Drinking Water, Using Probabilistic Approaches

BACKGROUND

This study was focused on the probability of carcinogen risk of low-level ingestion and dermal exposure with polycyclic aromatic hydrocarbons (PAHs) from drinking water in Tehran, capital of Iran.

METHODS

Concentrations of 16 PAHs were measured in the tap, bottled and heated tap water in four different seasons. Using a questionnaire-based survey, exposure with PAHs from drinking water was evaluated via direct ingestion, swimming, washing and showering. Finally, a comprehensive risk assessment was performed in four age groups. Rank correlation was used to represent variability in risk analysis and obtained coefficients were used for sensitivity analysis. In addition, Monte Carlo simulation was implemented to determine risk probability distributions and to calculate cumulative probability of the total risks in different age groups.

RESULTS

The lifetime average daily dose and the dermal absorbed dose were 0.69E-06 and 1.33E-05 mg/kg/day, respectively. The total estimated excess lifetime cancer risk (ELCR) of ingestion and dermal exposure were 1.57E-05 and 17.24E-05.

CONCLUSION

Sum of estimated ingestion and dermal ELCR was 18.81E-05, which was higher than the acceptable value recommended by WHO. It means a total of 1504 lifetime cancer cases in residents of Tehran. Monte Carlo simulation indicated that risk probability above the acceptable level was 96.2% in dermal exposure. Moreover, sensitivity analysis indicated that tap water consumption (P_spearman >0.92) and washing activities (P_spearman>0.95) had the greatest correlation on the cancer risk.

Validation of an Analytical Method for Determination of Benzo[a]pyrene Bread using QuEChERS Method by GC-MS

A fast and simple modified QuEChERS (quick, easy, cheap, rugged and safe) extraction method based on spiked calibration curves and direct sample introduction was developed for determination of Benzo [a] pyrene (BaP) in bread by gas chromatography-mass spectrometry single quadrupole selected ion monitoring (GC/MS-SQ-SIM). Sample preparation includes: extraction of BaP into acetone followed by cleanup with dispersive solid phase extraction. The use of spiked samples for constructing the calibration curve substantially reduced adverse matrix-related effects. The average recovery of BaP at 6 concentration levels was in range of 95-120%. The method was proved to be reproducible with relative standard deviation less than 14.5% for all of the concentration levels. The limit of detection and limit of quantification were 0.3 ng/g and 0.5 ng/g, respectively. Correlation coefficient of 0.997 was obtained for spiked calibration standards over the concentration range of 0.5-20 ng/g. To the best of our knowledge, this is the first time that a QuEChERS method is used for the analysis of BaP in breads. The developed method was used for determination of BaP in 29 traditional (Sangak) and industrial (Senan) bread samples collected from Tehran in 2014. These results showed that two Sangak samples were contaminated with BaP. Therefore, a comprehensive survey for monitoring of BaP in Sangak bread samples seems to be needed. This is the first report concerning contamination of bread samples with BaP in Iran.

Simultaneous Determination of 13 Priority Polycyclic Aromatic Hydrocarbons in Tehran's Tap Water and Water for Injection Samples Using Dispersive Liquid-Liquid Micro Extraction Method and Gas Chromatography-Mass Spectrometry

Polycyclic aromatic hydrocarbons (PAHs) are classified as persistent and carcinogenic organic pollutants. PAHs contamination has been reported in water. Many of relevant regulatory bodies such as EU and EPA have regulated the limit levels for PAHs in drinking water. In this study, 13 priority polycyclic aromatic hydrocarbons (PAHs) were determined in tap water samples of Tehran and water for injection. Dispersive liquid-liquid microextraction procedure combined with gas chromatography-mass spectrometry was used for the extraction and determination of PAHs in the samples. Under the optimized conditions, the range of extraction recoveries and relative standard deviations (RSDs) of PAHs in water using internal standard (anthracene-d10) were in the range of 71-90% and 4-16%, respectively. Limit of detection for different PAHs were between 0.03 and 0.1 ngmL(-1). The concentration of PAHs in all tap water as well as water for injection samples were lower than the limit of quantification of PAHs. This is the first study addressing the occurrence of PAHs in water for injection samples in Iran using dispersive liquid-liquid micro extraction procedure combined with gas chromatography-mass spectrometry.

Determination of Benzo[a]pyrene in Traditional, Industrial and Semi- industrial Breads Using a Modified QuEChERS Extraction, Dispersive SPE and GC-MS and Estimation of its Dietary Intake

A fast and simple modified QuEChERS extraction method was developed for determination of Benzo[a]pyrene (BaP) in 137 traditional (Sangak), semi-industrial (Sangak) and industrial bread samples using spiked calibration curves by GC/MS. Sample preparation includes extraction of BaP into acetone followed by cleanup with dispersive solid phase extraction. The limit of detection and limit of quantification were 0.3 ng/g and 0.5 ng/g, respectively. The values for recoveries and RSD were calculated as 110.5-119.85% and <11.6% respectively. Average concentration of BaP in Sangak bread samples of Shiraz and Tehran was 0.59 and 0.60 ng/g, respectively. 35.5% of samples of breads collected in Tehran were contaminated with BaP at the amount higher than maximum levels regulated in processed cereal-based foods and baby foods by European Commission (1 ng/g). Seventeen percent of samples of breads collected in Shiraz were contaminated with BaP which 13 % of total samples were >1 ng/g. BaP content in all industrial samples was lower than LOQ. Assuming the consumption of bread in Tehran and Shiraz is limited to these kinds of breads, the daily intake of BaP in Tehran and Shiraz population through bread consumption was estimated to be 170.6 and 168.7 ng/day, respectively. This is the first report concerning contamination of bread samples with BaP in Iran.

Mutagenicity Assessment of Drinking Water in Combination with Flavored Black Tea Bags: a Cross Sectional Study in Tehran

Diseases related to water impurities may present as major public health burdens. The present study aimed to assess the mutagenicity of drinking water from different zones of Tehran, and evaluate possible health risks through making tea with tea bags, by Ames mutagenicity test using TA 100, TA 98 and YG1029 strains. For this purpose, 450 water samples were collected over the period of July to December 2014 from 5 different zones of Tehran. Except for one sample, no mutagenic potential was detected during these two seasons and the MI scores were almost normal (≤ 1-1.6) in TA 100, TA 98 and YG1029 strains. Although no mutagenic effects were considered in TA 98 and TA 100 in the test samples of our three evaluated tea bag brands, one sample from a local company showed mutagenic effects in the YG1029 strain (MI=1.7-1.9 and 2) after prolonged (10-15 min.) steeping. Despite the mild mutagenic effect discovered for one of the brand, this cross sectional study showed relative safety of water samples and black tea bags in Tehran. According to the sensitivity of YG1029 to the mutagenic potential of water and black tea, even without metabolic activation by s9 fraction, this metabolizer strain could be considered as sensitive and applicable to food samples for quantitative analysis of mutagens.

Electrochemical Interrogation of G3-Poly(propylene thiophenoimine) Dendritic Star Polymer in Phenanthrene Sensing

A novel dendritic star-copolymer, generation 3 poly(propylene thiophenoimine) (G3PPT)-co-poly(3-hexylthiophene) (P3HT) star co-polymer on gold electrode (i.e., Au|G3PPT-co-P3HT) was used as a sensor system for the determination of phenanthrene (PHE). The G3PPT-co-P3HT star co-polymer was synthesized via in situ electrochemical co-polymerization of generation 3 poly (propylene thiophenoimine) and poly (3-hexylthiophene) on gold electrode. 1HNMR spectroscopy was used to determine the regioregularity of the polymer composites, whereas Fourier transform infrared spectroscopy and scanning electron microscopy were used to study their structural and morphological properties. Au|G3PPT-co-P3HT in the absence of PHE, exhibited reversible electrochemistry attributable to the oligo (thiophene) 'pendants' of the dendrimer. PHE produced an increase in the voltammetric signals (anodic currents) due to its oxidation on the dendritic material to produce catalytic current, thereby suggesting the suitability of the Au|G3PPT-co-P3HT electrode as a PHE sensor. The electrocatalysis of PHE was made possible by the rigid and planar oligo-P3HT species (formed upon the oxidation of the oligo (thiophene) pendants of the star-copolymer), which allowed the efficient capture (binding) and detection (electrocatalytic oxidation) of PHE molecules.

Influence of bioaugmentation on biodegradation of phenanthrene-contaminated soil by earthworm in lab scale

BACKGROUND

Use of earthworm to eliminate the phenanthrene from the soil (bioaccumulation) is developed as an economical method. Bioaugmentation of microorganism was used for promotion of bioaccumulation by earthworm. The aim of this study was to determine the bioaccumulation or biodegradation of phenanthrene by Eisenia fetida and bacterial consortium in polluted soil.

METHODS

The amount of 0.4 kg of the polluted soil in the ratio of 10 and 30 mg phenanthrene per kg of dry soil was transferred into each pot. Afterwards, bacteria and earthworms were added to each pot in separate and combination. The samples were kept under field conditions, and the retention concentrations of phenanthrene were analyzed after 8 weeks.

RESULTS

Results showed that the Eisenia fetida was able to significantly remove phenanthrene from the polluted soil samples. Bioaccumulation and bioaugmentation alone have the removal efficiency of 60.24% and 50.3%, respectively. In the combined mode, phenanthrene removal efficiency was 63.81%.

CONCLUSIONS

The current study indicated that the use of earthworms, could improve both phenanthrene bioavailability and microbial activity, which led to enhancing removal of carbon-based pollutants.