Pentachlorophenol removal from aqueous solutions by microwave/persulfate and microwave/H2O2: a comparative kinetic study

A review of microwave-assisted advanced oxidation processes for wastewater treatment

Microwave (MW) technology has gained increasing interest in wastewater treatment due to its unique properties, such as fast and uniform heating, hot spots effect, and non-thermal effect. MW enhances the production of active radicals (e.g., OH, SO₄^-), which exerts a stronger integrated treatment effect in combination with advanced oxidation processes. Over the years, microwave-assisted advanced oxidation processes (MW-AOPs) have developed rapidly to degrade pollutants as innovative treatment approaches. This paper provides a detailed classification and a comprehensive review of MW-AOPs. The latest applications of MW in different advanced oxidation systems (oxidation systems, catalytic oxidation systems, and photochemical, electrochemical and sonochemical systems) are reviewed. The reaction parameters and performance of MW-AOPs in wastewater treatment are discussed, and the enhancement of pollutant degradation by MW is highlighted. In addition, the operating costs of MW-AOPs are evaluated. Some recommendations on MW-AOPs are made for future research. This review provides meaningful information on the potential development and evolution of MW-AOPs.

Adsorption-photocatalytic processes for removal of pentachlorophenol contaminant using FeNi3/SiO2/ZnO magnetic nanocomposite under simulated solar light irradiation

The adsorption followed by photocatalytic degradation process was examined for the pentachlorophenol (PCP) removal from aqueous solution. These processes were accomplished by using FeNi₃/SiO₂/ZnO magnetic nanocomposite as an adsorbent-photocatalytic agent and under the irradiation of solar light. The magnetic nanocomposite used was first synthesized and then was characterized using transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), vibrating-sample magnetometer (VSM), and X-ray diffraction (XRD) spectroscopy. The PCP removal efficiency was tested for various factors, including pH, PCP concentration, and nanocomposite dose at different contact times. The characterization results of TEM, FE-SEM, and VSM analysis showed that the synthesized nanoparticles are amorphous and tend to agglomerate due to their high super-paramagnetic property. In addition, the EDX technique showed that the Zn and O elements had the highest weight percent in the synthesized nanocomposite, respectively. On the other hand, XRD analysis revealed that the crystalline size of the nanoparticles was about 42 nm. The kinetic of PCP degradation followed the pseudo-first-order model with R² = 0.978. According to the results of the isotherm study, the adsorption of PCP onto the nanoparticles followed the Freundlich model. The results of adsorption-photocatalytic degradation experiments showed that 100% removal of PCP was obtained at optimum conditions of pH = 3, nanocomposite dose = 0.5 g/L, contact time = 180 min, and initial PCP concentration of 10 mg/L. Through the results obtained from this study, the adsorption process followed by solar light photocatalytic degradation process using FeNi₃/SiO₂/ZnO magnetic nanocomposite is found to be an efficacious treatment method for the removal of PCP contaminant from water and wastewater.

The application of microwaves in sulfate radical-based advanced oxidation processes for environmental remediation: A review

The generation of sulfate radicals is a key factor to limit the catalytic activities of sulfate radical-based advanced oxidation processes (SR-AOPs). Microwave irradiation is a specific method to heat solutions via thermal and nonthermal effects, and has attracted an increasing amount of attention in recent years. Herein, we focus on the application of microwaves in SR-AOPs that called SR-MAOPs in environmental remediation, including wastewater, landfill leachate, biological waste sludge and soil, etc. treatment. Various systems including homogeneous and heterogeneous SR-MAOPs were reviewed. In wastewater treatment, not only the dyes and pharmaceutical and personal care products (PPCPs) were considered, the application in actual water matrices was also summarized. In addition, the function of remediation for organic-contaminated soil, landfill leachate and biological waste sludge were assessed using SR-MAOPs. In addition to evaluating the degradation efficiency of various organic pollutants from environment, the dewaterability is another key to treat biological waste sludge. The SR-MAOPs could break up hydrogen bonds and inactivate and denature complex biological molecules via microwave effects to achieve the dewatering of microorganisms in sludge. Furthermore, the COD of the sludge increased to a high level after microwave irradiation of sludge, which means that biopolymers released from microbial cells into the solution. Then, the released COD could be well treated by the SR-MAOPs. Based on the summary, we reveal that SR-MAOPs are potential technologies for environmental remediation, especially for systems with complicated organic compounds.

Comparison of real wastewater oxidation with Fenton/Fenton-like and persulfate activated by NaOH and Fe(II)

Treatment of polluted wastewaters from industrial activities has become a source of major concern for the environment. In this work, real wastewater from a physico-chemical (WWFQ) treatment was tested through different oxidation technologies: Fenton and Fenton-like reagent and persulfate activated by NaOH and Fe(II). Oxidation reactions with Fenton's reagent were carried out in a 0.25 L batch reactor at 25 °C by adding either Fe(II) or Fe(III) and H₂O₂ to an aqueous solution of wastewater, whose pH was previously adjusted to 2 or 3. Iron concentration ranging from 25 to 100 mg/L and peroxide concentration from 2500 to 10000 mg/L were used. The total organic carbon slightly decreased when WWFQ was treated. Moreover, better results were obtained when Fe(II) was used than Fe(III). Both iron concentration and oxidant dosage had a positive influence on the chemical oxygen demand (COD) removal, until an asymptotic value of 30% was obtained. Oxidation of pollutants contained in WWFQ was studied with persulfate (18.4-294 mM) activated with NaOH and Fe(II) (36.8-588 mM). Again, a positive influence of both persulfate and NaOH was observed, although a similar asymptotic COD value was observed. This parallelism between both technologies confirms recalcitrant compounds were obtained.

Bisphenol A removal from aqueous solutions using novel UV/persulfate/H2O2/Cu system: optimization and modelling with central composite design and response surface methodology

BACKGROUND

Bisphenol A is a high production volume chemical widely used in manufacturing polycarbonate plastics and epoxy resins used in many industries. Due to its adverse effects on human health as an endocrine disruptor and many other effects on the various organs of the human body as well as aquatic organisms, it should be removed from the aquatic environments. This study aimed to mineralisation of BPA from aquatic environments by application of novel UV/SPS/H₂O₂/Cu system and optimization and modelling of its removal using central composite design (CCD) from response surface methodology (RSM).

METHODS

CCD from RSM was used for modeling and optimization of operation parameters on the BPA degradation using UV/SPS/HP/Cu system. Effective operation parameters were initial persulfate, H₂O₂, Cu²⁺ and BPA concentration along with pH and reaction time, all in three levels were investigated. For analysis of obtained data ANOVA test was used.

RESULTS

The results showed that a quadratic model is suitable to fit the experimental data (p < 0.0001). Analysis of response surface plots showed a considerable impact of all six selected variables which BPA and Cu²⁺ initial concentrations have been the highest and the least impact on the process, respectively. F-value of model was 54.74 that indicate significance of the model. The optimum values of the operation parameters were determined. The maximum removal of BPA was achieved 99.99 % in optimal conditions and in that condition TOC removal was about 70 %. Finally, validation and accuracy of the model were also evaluated by graphical residual analysis and the influential diagnostics plots. The higher relevance between actual and predicted values demonstrated the validation and applicability of the obtained equation as the model.

CONCLUSIONS

According to the results, UV/SPS/HP/Cu system is an effective process in degradation and mineralisation of BPA and CCD methodology is a convenient and reliable statistical tool for optimizing BPA removal from aqueous solutions.

Optimization of sonochemical degradation of tetracycline in aqueous solution using sono-activated persulfate process

BACKGROUND

In this study, a central composite design (CCD) was used for modeling and optimizing the operation parameters such as pH, initial tetracycline and persulfate concentration and reaction time on the tetracycline degradation using sono-activated persulfate process. The effect of temperature, degradation kinetics and mineralization, were also investigated.

RESULTS

The results from CCD indicated that a quadratic model was appropriate to fit the experimental data (p < 0.0001) and maximum degradation of 95.01 % was predicted at pH = 10, persulfate concentration = 4 mM, initial tetracycline concentration = 30.05 mg/L, and reaction time = 119.99 min. Analysis of response surface plots revealed a significant positive effect of pH, persulfate concentration and reaction time, a negative effect of tetracycline concentration. The degradation process followed the pseudo-first-order kinetic. The activation energy value of 32.01 kJ/mol was obtained for US/S2O8 (2-) process. Under the optimum condition, the removal efficiency of COD and TOC reached to 72.8 % and 59.7 %, respectively. The changes of UV-Vis spectra during the process was investigated. The possible degradation pathway of tetracycline based on loses of N-methyl, hydroxyl, and amino groups was proposed.

CONCLUSIONS

This study indicated that sono-activated persulfate process was found to be a promising method for the degradation of tetracycline.