Shape and Size-Dependent Magnetic Properties of Fe3O4 Nanoparticles Synthesized Using Piperidine

One-Dimensional Mn5Si3 Nanorods: Fabrication, Microstructure, and Magnetic Properties via a Novel Casting-Extraction Route

This study presents a simple and innovative approach for producing one-dimensional Mn₅Si₃ nanorods through a casting-extraction process. In this technique, the Mn₅Si₃ nanorods were synthesized by reacting Mn and Si during brass solidification and extracted by electrochemical etching of the brass matrix. The effect of the cooling rate during casting on the nanorods' dimension, morphology, and magnetic properties was investigated. The results demonstrate that the prepared high-purity Mn₅Si₃ nanorods had a single-crystal D8₈ structure and exhibited ferromagnetism at room temperature. The morphology of the nanorods was an elongated hexagonal prism, and their preferred growth was along the [0001] crystal direction. Increasing the cooling rate from 5 K/s to 50 K/s lead to a decrease in the dimension of the nanorods but an increase in their ferromagnetism. At the optimal cooling rate of 50 K/s, the nanorods had a diameter and length range of approximately 560 nm and 2~11 μm, respectively, with a highest saturation magnetization of 7.5 emu/g, and a maximum coercivity of 120 Oe. These properties make the fabricated Mn₅Si₃ nanorods potentially useful for magnetic storage applications, and this study also provides a new perspective on the preparation of one-dimensional nanomaterials.

Assessing the Heat Generation and Self-Heating Mechanism of Superparamagnetic Fe3O4 Nanoparticles for Magnetic Hyperthermia Application: The Effects of Concentration, Frequency, and Magnetic Field

Magnetite nanoparticles (MNPs) exhibit favorable heating responses under magnetic excitation, which makes them particularly suited for various hyperthermia applications. Herein, we report the detailed self-heating mechanisms of MNPs prepared via the Ko-precipitation Hydrolytic Basic (KHB) methodology. The as-prepared MNPs were fully characterized using various spectroscopic techniques including transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and vibrating sample magnetometry (VSM). MNPs exhibited stable 15 nm quasi-spherical small-sized particles, pure crystalline cubic Fe₃O₄ phases, high saturation magnetizations (Ms = ~40 emu·g^-1), and superparamagnetic behavior. In response to alternating magnetic fields (AMFs), these MNPs displayed excellent self-heating efficiencies with distinctive heating responses, even when minimal doses of MNPs were used. Heating efficacies and specific absorption rate (SAR) values as functions of concentration, frequency, and amplitude were systematically investigated. Remarkably, within only a few minutes, MNPs (2.5 mg/mL) showed a rapid dissipation of heat energy, giving a maximum intrinsic loss power (ILP) of 4.29 nHm²/kg and a SAR of 261 W/g. Hyperthermia temperatures were rapidly reached in as early as 3 min and could rise up to 80 °C. In addition, Rietveld refinement, Langevin, and linear response theory (LRT) models were studied to further assess the magnetic and heating mechanisms. The LRT model was used to determine the Néel relaxation time (τ_R = 5.41 × 10^-7 s), which was compared to the Brownian relation time value (τ_B = 11 × 10^-7 s), showing that both mechanisms are responsible for heat dissipated by the MNPs. Finally, the cytotoxicity assay was conducted on aqueous dispersions of MNPs, indicating their biocompatibility and low toxicity. Our results strongly suggest that the as-prepared Fe₃O₄ MNPs are promising vehicles for potential magnetically triggered biomedical hyperthermia applications.

First-Row Transition Metal Complexes of a Phosphine-Silylene-Based Hybrid Ligand

We have prepared two new silylene-phosphine-based hybrid ligands Si{N(R)C₆H₄(PPh₂)}{PhC(N^tBu)₂} [R = TMS {trimethylsilyl} (1) and TBDMS {tert-butyldimethylsilyl} (2)], which possess two donor sites. Furthermore, the treatment of the bidentate ligand 1 with base metal halides {FeBr₂, CoBr₂, NiCl₂·dme [nickel chloride(II) ethylene glycol dimethyl ether]} and 2 with NiBr₂·dme [nickel bromide(II) ethylene glycol dimethyl ether] afforded four-coordinate six-membered metal complexes 3-6, respectively, which feature coordination from both Si(II) and P(III) sites. Subsequently, complexes 3 [(FeBr₂)Si{N(SiMe₃)C₆H₄(PPh₂)}{PhC(N^tBu)₂}], 4 [(CoBr₂)Si{N(SiMe₃)C₆H₄(PPh₂)}{PhC(N^tBu)₂}], 5 [(NiCl₂)Si{N(SiMe₃)C₆H₄(PPh₂)}{PhC(N^tBu)₂}], and 6 [(NiBr₂)Si{N(Si^tBuMe₂)C₆H₄(PPh₂)}{PhC(N^tBu)₂}] are studied for their redox and magnetic properties with the help of UV-vis spectroscopy, cyclic voltammetry, SQUID magnetometry, and theoretical calculations. Complexes 3-6 were found to display a paramagnetic behavior. All the compounds are well established by single-crystal X-ray diffraction studies.

Microwave-Assisted Solvothermal Synthesis of Nanocrystallite-Derived Magnetite Spheres

The synthesis of magnetic particles triggers the interest of many scientists due to their relevant properties and wide range of applications in the catalysis, nanomedicine, biosensing and magnetic separation fields. A fast synthesis of iron oxide magnetic particles using an eco-friendly and facile microwave-assisted solvothermal method is presented in this study. Submicron Fe₃O₄ spheres were prepared using FeCl₃ as an iron source, ethylene glycol as a solvent and reductor and sodium acetate as a precipitating and nucleating agent. The influence of the presence of polyethylene glycol as an additional reductor and heat absorbent was also evaluated. We reduce the synthesis time to 1 min by increasing the reaction temperature using the microwave-assisted solvothermal synthesis method under pressure or by adding PEG at lower temperatures. The obtained magnetite spheres are 200–300 nm in size and are composed of 10–30 nm sized crystallites. The synthesized particles were investigated using the XRD, TGA, pulsed-field magnetometry, Raman and FTIR methods. It was determined that adding PEG results in spheres with mixed magnetite and maghemite compositions, and the synthesis time increases the size of the crystallites. The presented results provide insights into the microwave-assisted solvothermal synthesis method and ensure a fast route to obtaining spherical magnetic particles composed of different sized nanocrystallites.

Functionalization of 2D MoS2 Nanosheets with Various Metal and Metal Oxide Nanostructures: Their Properties and Application in Electrochemical Sensors

Two-dimensional transition metal dichalcogenides (2D TMDs) have gained considerable attention due to their distinctive properties and broad range of possible applications. One of the most widely studied transition metal dichalcogenides is molybdenum disulfide (MoS₂). The 2D MoS₂ nanosheets have unique and complementary properties to those of graphene, rendering them ideal electrode materials that could potentially lead to significant benefits in many electrochemical applications. These properties include tunable bandgaps, large surface areas, relatively high electron mobilities, and good optical and catalytic characteristics. Although the use of 2D MoS₂ nanosheets offers several advantages and excellent properties, surface functionalization of 2D MoS₂ is a potential route for further enhancing their properties and adding extra functionalities to the surface of the fabricated sensor. The functionalization of the material with various metal and metal oxide nanostructures has a significant impact on its overall electrochemical performance, improving various sensing parameters, such as selectivity, sensitivity, and stability. In this review, different methods of preparing 2D-layered MoS₂ nanomaterials, followed by different surface functionalization methods of these nanomaterials, are explored and discussed. Finally, the structure-properties relationship and electrochemical sensor applications over the last ten years are discussed. Emphasis is placed on the performance of 2D MoS₂ with respect to the performance of electrochemical sensors, thereby giving new insights into this unique material and providing a foundation for researchers of different disciplines who are interested in advancing the development of MoS₂-based sensors.

Aminopropyltriethoxysilane (APTES)-Modified Nanohydroxyapatite (nHAp) Incorporated with Iron Oxide (IO) Nanoparticles Promotes Early Osteogenesis, Reduces Inflammation and Inhibits Osteoclast Activity

Due to its increased prevalence, osteoporosis (OP) represents a great challenge to health care systems and brings an economic burden. To overcome these issues, treatment plans that suit the need of patients should be developed. One of the approaches focuses on the fabrication of personalized biomaterials, which can restore the balance and homeostasis of disease-affected bone. In the presented study, we fabricated nanometer crystalline hydroxyapatite (nHAp) and iron oxide (IO) nanoparticles stabilized with APTES and investigated whether they can modulate bone cell metabolism and be useful in the fabrication of personalized materials for OP patients. Using a wide range of molecular techniques, we have shown that obtained nHAp@APTES promotes viability and RUNX-2 expression in osteoblasts, as well as reducing activity of critical proinflammatory cytokines while inhibiting osteoclast activity. Materials with APTES modified with nHAp incorporated with IO nanoparticles can be applied to support the healing of osteoporotic bone fractures as they enhance metabolic activity of osteoblasts and diminish osteoclasts’ metabolism and inflammation.

Review on Recent Progress in Magnetic Nanoparticles: Synthesis, Characterization, and Diverse Applications

Diverse applications of nanoparticles (NPs) have revolutionized various sectors in society. In the recent decade, particularly magnetic nanoparticles (MNPs) have gained enormous interest owing to their applications in specialized areas such as medicine, cancer theranostics, biosensing, catalysis, agriculture, and the environment. Controlled surface engineering for the design of multi-functional MNPs is vital for achieving desired application. The MNPs have demonstrated great efficacy as thermoelectric materials, imaging agents, drug delivery vehicles, and biosensors. In the present review, first we have briefly discussed main synthetic methods of MNPs, followed by their characterizations and composition. Then we have discussed the potential applications of MNPs in different with representative examples. At the end, we gave an overview on the current challenges and future prospects of MNPs. This comprehensive review not only provides the mechanistic insight into the synthesis, functionalization, and application of MNPs but also outlines the limits and potential prospects.

Nanohydroxyapatite (nHAp) Doped with Iron Oxide Nanoparticles (IO), miR-21 and miR-124 Under Magnetic Field Conditions Modulates Osteoblast Viability, Reduces Inflammation and Inhibits the Growth of Osteoclast - A Novel Concept for Osteoporosis Treatment: Part 1

Purpose

Osteoporosis results in a severe decrease in the life quality of many people worldwide. The latest data shows that the number of osteoporotic fractures is becoming an increasing international health service problem. Therefore, a new kind of controllable treatment methods for osteoporotic fractures is extensively desired. For that reason, we have manufactured and evaluated nanohydroxyapatite (nHAp)-based composite co-doped with iron oxide (IO) nanoparticles. The biomaterial was used as a matrix for the controlled delivery of miR-21-5p and miR-124-3p, which have a proven impact on bone cell metabolism.

Methods

The nanocomposite Ca₅(PO₄)₃OH/Fe₃O₄ (later called nHAp/IO) was obtained by the wet chemistry method and functionalised with microRNAs (nHAp/IO@miR-21/124). Its physicochemical characterization was performed using XRPD, FT-IR, SEM-EDS and HRTEM and SAED methods. The modulatory effect of the composite was tested in vitro using murine pre-osteoblasts MC3T3-E1 and pre-osteoclasts 4B12. Moreover, the anti-inflammatory effects of biomaterial were analysed using a model of LPS-treated murine macrophages RAW 264.7. We have analysed the cells’ viability, mitochondria membrane potential and oxidative stress under magnetic field (MF+) and without (MF-). Moreover, the results were supplemented with RT-qPCR and Western blot assays to evaluate the expression profile for master regulators of bone metabolism.

Results

The results indicated pro-osteogenic effects of nHAp/IO@miR-21/124 composite enhanced by exposure to MF. The enhanced osteogenesis guided by nHAp/IO@miR-21/124 presence was associated with increased metabolism of progenitor cells and activation of osteogenic markers (Runx-2, Opn, Coll-1). Simultaneously, nanocomposite decreased metabolism and differentiation of pre-osteoclastic 4B12 cells accompanied by reduced expression of CaII and Ctsk. Obtained composite regulated viability of bone progenitor cells and showed immunomodulatory properties inhibiting the expression of inflammatory markers, ie, TNF-α, iNOs or IL-1β, in LPS-stimulated RAW 264.7 cells.

Conclusion

We have described for the first time a new concept of osteoporosis treatment based on nHAp/IO@miR-21/124 application. Obtained results indicated that fabricated nanocomposite might impact proper regeneration of osteoporotic bone, restoring the balance between osteoblasts and osteoclast.

Magnetic Colloidal Particles in Combinatorial Thin-Film Gradients for Magnetic Resonance Imaging and Hyperthermia

A stable oil-in-water (O/W) magnetic emulsion was prepared by the emulsification of organic ferrofluid in an aqueous media, and its theranostic applications were investigated. The synthesis and characterization of the organic ferrofluid were carried out comprising of superparamagnetic maghemite nanoparticles with oleic acid coating stabilized in octane. Both exhibit spherical morphology with a mean size of 6 nm and 200 nm, respectively, as determined by TEM. Thermogravimetric analysis was carried out to determine the chemical composition of the emulsion. The research work described here is novel and elaborates the fabrication of thin-film gradients with 5, 10, 15, and 20 bilayers by layer-by-layer technique using polydimethyl diallyl ammonium chloride (PDAC) and prepared magnetic colloidal particles. The thin-film gradients were characterized for their roughness, morphology, and wettability. The developed gradient films and colloids were explored in magnetic resonance imaging (MRI) and hyperthermia. T1- and T2-weighted images and their corresponding signal intensities were obtained at 1.5 T. A decreasing trend in signal intensities with an increase in nanoparticle concentration in colloids and along the gradient was observed in T2-weighted images. The hyperthermia capability was also evaluated by measuring temperature rise and calculating specific absorption rates (SAR). The SAR of the colloids at 259 kHz, 327 kHz, and 518 kHz were found to be 156 W/g, 255 W/g, and 336 W/g, respectively. The developed magnetic combinatorial thin-film gradients present a significant potential for the future efficient simultaneous diagnostic and therapeutic bioapplications.

Magnetic Porous Controlled Fe3O4-Chitosan Nanostructure: An Ecofriendly Adsorbent for Efficient Removal of Azo Dyes

In this work, chitosan/magnetite nanoparticles (ChM) were quickly synthesized according to our previous report based on co-precipitation reaction under ultrasound (US) irradiation. Besides ChM was in-depth structurally characterized, showing a crystalline phase corresponding to magnetite and presenting a spheric morphology, a "nanorod"-type morphology was also obtained after increasing reaction time for eight minutes. Successfully, both morphologies presented a nanoscale range with an average particle size of approximately 5-30 nm, providing a superparamagnetic behavior with saturation magnetization ranging from 44 to 57 emu·g^-1. As ChM nanocomposites have shown great versatility considering their properties, we proposed a comparative study using three different amine-based nanoparticles, non-surface-modified and surface-modified, for removal of azo dyes from aqueous solutions. From nitrogen adsorption-desorption isotherm results, the surface-modified ChMs increased the specific surface area and pore size. Additionally, the adsorption of anionic azo dyes (reactive black 5 (RB5) and methyl orange (MO)) on nanocomposites surface was pH-dependent, where surface-modified samples presented a better response under pH 4 and non-modified one under pH 8. Indeed, adsorption capacity results also showed different adsorption mechanisms, molecular size effect and electrostatic attraction, for unmodified and modified ChMs, respectively. Herein, considering all results and nanocomposite-type structure, ChM nanoparticles seem to be a suitable potential alternative for conventional anionic dyes adsorbents, as well as both primary materials source, chitosan and magnetite, are costless and easily supplied.

Recent Advances in Magnetite Nanoparticle Functionalization for Nanomedicine

Functionalization of nanomaterials can enhance and modulate their properties and behaviour, enabling characteristics suitable for medical applications. Magnetite (Fe3O4) nanoparticles are one of the most popular types of nanomaterials used in this field, and many technologies being already translated in clinical practice. This article makes a summary of the surface modification and functionalization approaches presented lately in the scientific literature for improving or modulating magnetite nanoparticles for their applications in nanomedicine.

Synthesis and controlled morphology of Ni@Ag core shell nanowires with excellent catalytic efficiency and recyclability

Ni@Ag core shell nanowires (NWs) were prepared by in situ chemical reduction of Ag⁺ around NiNWs as the inner core. Different Ni@Ag NWs with controllable morphologies were achieved through the layer-plus-island growth mode and this mechanism was confirmed by scanning electron microscopy, X-ray fluorescence, and X-ray photoelectron spectroscopy analyses. When used as a catalyst, the synthesized Ni@Ag NWs exhibited high reduction efficiency by showing a high reaction rate constant k of 0.408 s^-1 in reducing 4-nitrophenol at room temperature. Besides, combining the magnetic property, including high saturation magnetization and low coercivity, the magnetic NiNW core contributes to excellent recyclability and long-term stability with only a 2.2% performance loss after 10 recycles by magnets. The Ni@Ag NWs proposed here show unprecedentedly high potential in applications requiring high efficiency and a recyclable catalyst.

Nanomaterials Based on Fe3O4 and Phthalocyanines Derived from Cashew Nut Shell Liquid

In this work we report the synthesis of new hybrid nanomaterials in the core/shell/shell morphology, consisting of a magnetite core (Fe₃O₄) and two consecutive layers of oleic acid (OA) and phthalocyanine molecules, the latter derived from cashew nut shell liquid (CNSL). The synthesis of Fe₃O₄ nanoparticle was performed via co-precipitation procedure, followed by the nanoparticle coating with OA by hydrothermal method. The phthalocyanines anchorage on the Fe₃O₄/OA core/shell nanomaterial was performed by facile and effective sonication method. The as obtained Fe₃O₄/OA/phthalocyanine hybrids were investigated by Fourier transform infrared spectroscopy, X-ray diffraction, UV-visible spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis and magnetic measurements. TEM showed round-shaped nanomaterials with sizes in the range of 12–15 nm. Nanomaterials presented saturation magnetization (Ms) in the 1–16 emu/g and superparamagnetic behavior. Furthermore, it was observed that the thermal stability of the samples was directly affected by the insertion of different transition metals in the ring cavity of the phthalocyanine molecule.

Review of electromagnetic interference shielding materials fabricated by iron ingredients

Iron (Fe) and its counterparts, such as Fe2O3, Fe3O4, carbonyl iron and FeO, have attracted the attention of researchers during the past few years due to their bio-compatibility, bio-degradability and diverse applications in the field of medicines, electronics and energy; including water treatment, catalysis and electromagnetic wave interference shielding etc. In this review paper, we aimed to explore iron based materials for the prevention of electromagnetic interference (EMI) by means of both reflection and absorption processes, including the standard methods of synthesis of Fe-based materials along with the determination of EMI performance. It is customary that a proper combination of two dielectric-losses, i.e. electrical and magnetic losses, give excellent microwave absorption properties. Therefore, we focused on the different strategies of preparation of these iron based composites with dielectric carbon materials, polymers etc. Additionally, we explained their positive and negative aspects.

Effects of Environmental Conditions on High-Yield Magnetosome Production by Magnetospirillum gryphiswaldense MSR-1

Background

Magnetotactic bacteria are a heterogeneous group of Gram-negative prokaryote cells that produce linear chains of magnetic particles called magnetosomes, intracellular organelles composed of magnetic iron particles. Many important applications have been defined for magnetic nanoparticles in biotechnology, such as cell separation applications, as well as acting as carriers of enzymes, antibodies, or anti-cancer drugs. Since the bacterial growth is difficult and the yield of magnetosome production is low, the application of magnetosome has not been developed on a commercial scale.

Methods

Magnetospirillum gryphiswaldense strain MSR-1 was used in a modified current culture medium supplemented by different concentrations of oxygen, iron, carbon, and nitrogen, to increase the yield of magnetosomes.

Results

Our improved MSR-1 culture medium increased magnetosome yield, magnetosome number per bacterial cell, magnetic response, and bacterial cell growth yield significantly. The yield of magnetosome increased approximately four times. The optimized culture medium containing 25 mM of Na-pyruvate, 40 mM of NaNO3, 200 µM of ferrous sulfate, and 5-10 ppm of dissolved oxygen (DO) resulted in 186.67 mg of magnetosome per liter of culture medium. The iron uptake increased significantly, and the magnetic response of the bacteria to the magnetic field was higher than threefold as compared to the previously reported procedures.

Conclusion

This technique not only decreases the cultivation time but also reduces the production cost. In this modified method, the iron and DO are the major factors affecting the production of magnetosome by M. gryphiswaldense strain MSR-1. However, refining this technique will enable a further yield of magnetosome and cell density.

Chitosan-magnetite nanocomposite as a sensing platform to bendiocarb determination

A novel platform for carbamate-based pesticide quantification using a chitosan/magnetic iron oxide (Chit-Fe₃O₄) nanocomposite as a glassy carbon electrode (GCE) modifier is shown for an analytical methodology for determination of bendiocarb (BND). The BND oxidation signal using GCE/Chit-Fe₃O₄ compared with bare GCE was catalyzed, showing a 37.5% of current increase with the peak potential towards less positive values, showing method's increased sensitivity and selectivity. Using square-wave voltammetry (SWV), calibration curves for BND determination were obtained (n = 3), and calculated detection and quantification limits values were 2.09 × 10^-6 mol L^-1 (466.99 ppb) and 6.97 × 10^-6 mol L^-1 (1555.91 ppb), respectively. The proposed electroanalytical methodology was successfully applied for BND quantification in natural raw waters without any sample pretreatment, proving that the GCE/Chit-Fe₃O₄ modified electrode showed great potential for BND determination in complex samples. ᅟ Graphical abstract.

Lightweight reduced graphene oxide-Fe3O4 nanoparticle composite in the quest for an excellent electromagnetic interference shielding material

This work reports a detailed study of reduced graphene oxide (rGO)-Fe₃O₄ nanoparticle composite as an excellent electromagnetic (EM) interference shielding material in GHz range. A rGO-Fe₃O₄ nanoparticle composite was synthesized using a facile, one step, and modified solvothermal method with the reaction of FeCl₃, ethylenediamine and graphite oxide powder in the presence of ethylene glycol. Various structural, microstructural and optical characterization tools were used to determine its synthesis and various properties. Dielectric, magnetic and EM shielding parameters were also evaluated to estimate its performance as a shielding material for EM waves. X-ray diffraction patterns have provided information about the structural and crystallographic properties of the as-synthesized material. Scanning electron microscopy micrographs revealed the information regarding the exfoliation of graphite into rGO. Well-dispersed Fe₃O₄ nanoparticles over the surface of the graphene can easily be seen by employing transmission electron microscopy. For comparison, rGO nanosheets and Fe₃O₄ nanoparticles have also been synthesized and characterized in a similar fashion. A plot of the dielectric and magnetic characterizations provides some useful information related to various losses and the relaxation process. Shielding effectiveness due to reflection (SE_R), shielding effectiveness due to absorption (SE_A), and total shielding effectiveness (SE_T) were also plotted against frequency over a broad range (8-12 GHz). A significant change in all parameters (SE_A value from 5 dB to 35 dB for Fe₃O₄ nanoparticles to rGO-Fe₃O₄ nanoparticle composite) was found. An actual shielding effectiveness (SE_T) up to 55 dB was found in the rGO-Fe₃O₄ nanoparticle composite. These graphs give glimpses of how significantly this material shows shielding effectiveness over a broad range of frequency.

Single nanoparticles magnetization curves by controlled tip magnetization magnetic force microscopy

The development of high spatial resolution and element sensitive magnetic characterization techniques to quantitatively measure magnetic parameters of individual nanoparticles (NPs) and deeply understand and tune their magnetic properties is a hot topic in nanomagnetism. Magnetic force microscopy (MFM), thanks to its high lateral resolution, appears as a promising technique for the magnetic characterization of single nano-sized materials although it is still limited by some drawbacks, especially by the presence of electrostatic artifacts. Recently, these limitations have been overcome by the development of a particular MFM based technique called controlled magnetization - MFM (CM-MFM) allowing, in principle, a quantifiable correlation between the measured magnetic signal and the magnetization of the object under investigation. Here we propose an experimental procedure, based on the use of CM-MFM technique, to measure the magnetization curve of single magnetic NPs individuating their saturation magnetization, magnetic field, and coercivity. We measured, for the first time, the magnetization curves of individual Fe₃O₄ nanoparticles with diameters in the range of 18-32 nm by using a MFM instrument. Results are in very good agreement with the quantitative data obtained by SQUID analysis on a macroscopic sample, showing the high potential of the technique in the field of nanomagnetometry.