Plant Screen Mobile: an open-source mobile device app for plant trait analysis

Smartphone-based digital phenotyping for genome-wide association study of intramuscular fat traits in longissimus dorsi muscle of pigs

Intramuscular fat (IMF) content and distribution significantly contribute to the eating quality of pork. However, the current methods used for measuring these traits are complex, time-consuming and costly. To simplify the measurement process, this study developed a smartphone application (App) called Pork IMF. This App serves as a rapid and portable phenotyping tool for acquiring pork images and extracting the image-based IMF traits through embedded deep-learning algorithms. Utilizing this App, we collected the IMF traits of the longissimus dorsi muscle in a crossbred population of Large White × Tongcheng pigs. Genome-wide association studies detected 13 and 16 SNPs that were significantly associated with IMF content and distribution, respectively, highlighting NR2F2, MCTP2, MTLN, ST3GAL5, NDUFAB1 and PID1 as candidate genes. Our research introduces a user-friendly digital phenotyping technology for quantifying IMF traits and suggests candidate genes and SNPs for genetic improvement of IMF traits in pigs.

Opportunity and challenges of phenotyping plant salt tolerance

Salinity is a key factor limiting agricultural production worldwide. Recent advances in field phenotyping have enabled the recording of the environmental history and dynamic response of plants by considering both genotype × environment (G×E) interactions and envirotyping. However, only a few studies have focused on plant salt tolerance phenotyping. Therefore, we analyzed the potential opportunities and major challenges in improving plant salt tolerance using advanced field phenotyping technologies. RGB imaging and spectral and thermal sensors are the most useful and important sensing techniques for assessing key morphological and physiological traits of plant salt tolerance. However, field phenotyping faces challenges owing to its practical applications and high costs, limiting its use in early generation breeding and in developing countries.

Improving Coconut Using Modern Breeding Technologies: Challenges and Opportunities

Coconut (Cocos nucifera L.) is a perennial palm with a wide range of distribution across tropical islands and coastlines. Multitude use of coconut by nature is important in the socio-economic fabric framework among rural smallholders in producing countries. It is a major source of income for 30 million farmers, while 60 million households rely on the coconut industry directly as farm workers and indirectly through the distribution, marketing, and processing of coconut and coconut-based products. Stagnant production, inadequate planting materials, the effects of climate change, as well as pests and diseases are among the key issues that need to be urgently addressed in the global coconut industry. Biotechnology has revolutionized conventional breeding approaches in creating genetic variation for trait improvement in a shorter period of time. In this review, we highlighted the challenges of current breeding strategies and the potential of biotechnological approaches, such as genomic-assisted breeding, next-generation sequencing (NGS)-based genotyping and genome editing tools in improving the coconut. Also, combining these technologies with high-throughput phenotyping approaches and speed breeding could speed up the rate of genetic gain in coconut breeding to solve problems that have been plaguing the industry for decades.

PhenoApp: A mobile tool for plant phenotyping to record field and greenhouse observations

With the ongoing cost decrease of genotyping and sequencing technologies, accurate and fast phenotyping remains the bottleneck in the utilizing of plant genetic resources for breeding and breeding research. Although cost-efficient high-throughput phenotyping platforms are emerging for specific traits and/or species, manual phenotyping is still widely used and is a time- and money-consuming step. Approaches that improve data recording, processing or handling are pivotal steps towards the efficient use of genetic resources and are demanded by the research community. Therefore, we developed PhenoApp, an open-source Android app for tablets and smartphones to facilitate the digital recording of phenotypical data in the field and in greenhouses. It is a versatile tool that offers the possibility to fully customize the descriptors/scales for any possible scenario, also in accordance with international information standards such as MIAPPE (Minimum Information About a Plant Phenotyping Experiment) and FAIR (Findable, Accessible, Interoperable, and Reusable) data principles. Furthermore, PhenoApp enables the use of pre-integrated ready-to-use BBCH (Biologische Bundesanstalt für Land- und Forstwirtschaft, Bundessortenamt und CHemische Industrie) scales for apple, cereals, grapevine, maize, potato, rapeseed and rice. Additional BBCH scales can easily be added. The simple and adaptable structure of input and output files enables an easy data handling by either spreadsheet software or even the integration in the workflow of laboratory information management systems (LIMS). PhenoApp is therefore a decisive contribution to increase efficiency of digital data acquisition in genebank management but also contributes to breeding and breeding research by accelerating the labour intensive and time-consuming acquisition of phenotyping data.

PhenoApp: A mobile tool for plant phenotyping to record field and greenhouse observations

With the ongoing cost decrease of genotyping and sequencing technologies, accurate and fast phenotyping remains the bottleneck in the utilizing of plant genetic resources for breeding and breeding research. Although cost-efficient high-throughput phenotyping platforms are emerging for specific traits and/or species, manual phenotyping is still widely used and is a time- and money-consuming step. Approaches that improve data recording, processing or handling are pivotal steps towards the efficient use of genetic resources and are demanded by the research community. Therefore, we developed PhenoApp, an open-source Android app for tablets and smartphones to facilitate the digital recording of phenotypical data in the field and in greenhouses. It is a versatile tool that offers the possibility to fully customize the descriptors/scales for any possible scenario, also in accordance with international information standards such as MIAPPE (Minimum Information About a Plant Phenotyping Experiment) and FAIR (Findable, Accessible, Interoperable, and Reusable) data principles. Furthermore, PhenoApp enables the use of pre-integrated ready-to-use BBCH (Biologische Bundesanstalt für Land- und Forstwirtschaft, Bundessortenamt und CHemische Industrie) scales for apple, cereals, grapevine, maize, potato, rapeseed and rice. Additional BBCH scales can easily be added. The simple and adaptable structure of input and output files enables an easy data handling by either spreadsheet software or even the integration in the workflow of laboratory information management systems (LIMS). PhenoApp is therefore a decisive contribution to increase efficiency of digital data acquisition in genebank management but also contributes to breeding and breeding research by accelerating the labour intensive and time-consuming acquisition of phenotyping data.

N-dependent dynamics of root growth and nitrate and ammonium uptake are altered by the bacterium Herbaspirillum seropedicae in the cereal model Brachypodium distachyon

Nitrogen (N) fixation in cereals by root-associated bacteria is a promising solution for reducing use of chemical N fertilizers in agriculture. However, plant and bacterial responses are unpredictable across environments. We hypothesized that cereal responses to N-fixing bacteria are dynamic, depending on N supply and time. To quantify the dynamics, a gnotobiotic, fabricated ecosystem (EcoFAB) was adapted to analyse N mass balance, to image shoot and root growth, and to measure gene expression of Brachypodium distachyon inoculated with the N-fixing bacterium Herbaspirillum seropedicae. Phenotyping throughput of EcoFAB-N was 25-30 plants h-1 with open software and imaging systems. Herbaspirillum seropedicae inoculation of B. distachyon shifted root and shoot growth, nitrate versus ammonium uptake, and gene expression with time; directions and magnitude depended on N availability. Primary roots were longer and root hairs shorter regardless of N, with stronger changes at low N. At higher N, H. seropedicae provided 11% of the total plant N that came from sources other than the seed or the nutrient solution. The time-resolved phenotypic and molecular data point to distinct modes of action: at 5 mM NH4NO3 the benefit appears through N fixation, while at 0.5 mM NH4NO3 the mechanism appears to be plant physiological, with H. seropedicae promoting uptake of N from the root medium.Future work could fine-tune plant and root-associated microorganisms to growth and nutrient dynamics.

Interactive Medical Image Labeling Tool to Construct a Robust Convolutional Neural Network Training Data Set: Development and Validation Study

Background

Skin ulcers are an important cause of morbidity and mortality everywhere in the world and occur due to several causes, including diabetes mellitus, peripheral neuropathy, immobility, pressure, arteriosclerosis, infections, and venous insufficiency. Ulcers are lesions that fail to undergo an orderly healing process and produce functional and anatomical integrity in the expected time. In most cases, the methods of analysis used nowadays are rudimentary, which leads to errors and the use of invasive and uncomfortable techniques on patients. There are many studies that use a convolutional neural network to classify the different tissues in a wound. To obtain good results, the network must be trained with a correctly labeled data set by an expert in wound assessment. Typically, it is difficult to label pixel by pixel using a professional photo editor software, as this requires extensive time and effort from a health professional.

Objective

The aim of this paper is to implement a new, fast, and accurate method of labeling wound samples for training a neural network to classify different tissues.

Methods

We developed a support tool and evaluated its accuracy and reliability. We also compared the support tool classification with a digital gold standard (labeling the data with an image editing software).

Results

The obtained comparison between the gold standard and the proposed method was 0.9789 for background, 0.9842 for intact skin, 0.8426 for granulation tissue, 0.9309 for slough, and 0.9871 for necrotic. The obtained speed on average was 2.6, compared to that of an advanced image editing user.

Conclusions

This method increases tagging speed on average compared to an advanced image editing user. This increase is greater with untrained users. The samples obtained with the new system are indistinguishable from the samples made with the gold standard.

Struvite-based composites for slow-release fertilization: a case study in sand

Struvite (St) recovered from wastewaters is a sustainable option for phosphorus (P) recovery and fertilization, whose solubility is low in water and high in environments characterized by a low pH, such as acidic soils. To broaden the use of struvite in the field, its application as granules is recommended, and thus the way of application should be optimized to control the solubility. In this study struvite slow-release fertilizers were designed by dispersing St particles (25, 50, and 75 wt%) in a biodegradable and hydrophilic matrix of thermoplastic starch (TPS). It was shown that, in citric acid solution (pH = 2), TPS promoted a steadier P-release from St compared to the pure St pattern. In a pH neutral sand, P-diffusion from St-TPS fertilizers was slower than from the positive control of triple superphosphate (TSP). Nevertheless, St-TPS featured comparable maize growth (i.e. plant height, leaf area, and biomass) and similar available P as TSP in sand after 42 days of cultivation. These results indicated that St-TPS slow P release could provide enough P for maize in sand, achieving a desirable agronomic efficiency while also reducing P runoff losses in highly permeable soils.

Accelerating leaf area measurement using a volumetric approach

BACKGROUND

Despite the advances in the techniques of indirect estimation of leaf area, the destructive measurement approaches have still remained as the reference and the most accurate methods. However, even utilizing the modern sensors and applications usually requires the laborious and time-consuming practice of unfolding and analyzing the single leaves, separately. In the present study, a volumetric approach was tested to determine the pile leaf area based on the ratio of leaf volume divided by thickness. For this purpose, the suspension technique was used for volumetry, which is based on the simple practice and calculations of the Archimedes' principle.

RESULTS

Wheat volumetric leaf area (VLA), had a high agreement and approximately 1:1 correlation with the conventionally measured optical leaf area (OLA). Exclusion of the midrib volume from calculations, did not affect the estimation error (NRMSE < 2.61%); however, improved the slope of the linear model by about 6%, and also reduced the bias between the methods. The error of sampling for determining mean leaf thickness of the pile, was also less than 2% throughout the season. Besides, a more practical and facilitated version of pile volumetry was tested using Specific Gravity Bench (SGB), which is currently available as a laboratory equipment. As an important observation, which was also expectable according to the leaf 3D expansion (i.e., in a given 2D plane), it was evidenced that the variations in the OLA exactly follows the pattern of the changes in the leaf volume. Accordingly, it was suggested that the relative leaf areas of various experimental treatments might be compared directly based on volume, and independently of leaf thickness. Furthermore, no considerable difference was observed among the OLAs measured using various image resolutions (NRMSE < 0.212%); which indicates that even the superfast scanners with low resolutions as 200 dpi may be used for a precision optical measurement of leaf area.

CONCLUSIONS

It is expected that utilizing the reliable and simple concept of volumetric leaf area, based on which the measurement time might be independent of sample size, facilitate the laborious practice of leaf area measurement; and consequently, improve the precision of field experiments.

Advances in optical phenotyping of cereal crops

Optical sensors and sensing-based phenotyping techniques have become mainstream approaches in high-throughput phenotyping for improving trait selection and genetic gains in crops. We review recent progress and contemporary applications of optical sensing-based phenotyping (OSP) techniques in cereal crops and highlight optical sensing principles for spectral response and sensor specifications. Further, we group phenotypic traits determined by OSP into four categories - morphological, biochemical, physiological, and performance traits - and illustrate appropriate sensors for each extraction. In addition to the current status, we discuss the challenges of OSP and provide possible solutions. We propose that optical sensing-based traits need to be explored further, and that standardization of the language of phenotyping and worldwide collaboration between phenotyping researchers and other fields need to be established.

Leaf Area Index Estimation of Pergola-Trained Vineyards in Arid Regions Based on UAV RGB and Multispectral Data Using Machine Learning Methods

The leaf area index (LAI), a valuable variable for assessing vine vigor, reflects nutrient concentrations in vineyards and assists in precise management, including fertilization, improving yield, quality, and vineyard uniformity. Although some vegetation indices (VIs) have been successfully used to assess LAI variations, they are unsuitable for vineyards of different types and structures. By calibrating the light extinction coefficient of a digital photography algorithm for proximal LAI measurements, this study aimed to develop VI-LAI models for pergola-trained vineyards based on high-resolution RGB and multispectral images captured by an unmanned aerial vehicle (UAV). The models were developed by comparing five machine learning (ML) methods, and a robust ensemble model was proposed using the five models as base learners. The results showed that the ensemble model outperformed the base models. The highest R2 and lowest RMSE values that were obtained using the best combination of VIs with multispectral data were 0.899 and 0.434, respectively; those obtained using the RGB data were 0.825 and 0.547, respectively. By improving the results by feature selection, ML methods performed better with multispectral data than with RGB images, and better with higher spatial resolution data than with lower resolution data. LAI variations can be monitored efficiently and accurately for large areas of pergola-trained vineyards using this framework.

Breeding rice for a changing climate by improving adaptations to water saving technologies

Climate change is expected to increasingly affect rice production through rising temperatures and decreasing water availability. Unlike other crops, rice is a main contributor to greenhouse gas emissions due to methane emissions from flooded paddy fields. Climate change can therefore be addressed in two ways in rice: through making the crop more climate resilient and through changes in management practices that reduce methane emissions and thereby slow global warming. In this review, we focus on two water saving technologies that reduce the periods lowland rice will be grown under fully flooded conditions, thereby improving water use efficiency and reducing methane emissions. Rice breeding over the past decades has mostly focused on developing high-yielding varieties adapted to continuously flooded conditions where seedlings were raised in a nursery and transplanted into a puddled flooded soil. Shifting cultivation to direct-seeded rice or to introducing non-flooded periods as in alternate wetting and drying gives rise to new challenges which need to be addressed in rice breeding. New adaptive traits such as rapid uniform germination even under anaerobic conditions, seedling vigor, weed competitiveness, root plasticity, and moderate drought tolerance need to be bred into the current elite germplasm and to what extent this is being addressed through trait discovery, marker-assisted selection and population improvement are reviewed.

Image-Based, Organ-Level Plant Phenotyping for Wheat Improvement

Wheat was one of the first grain crops domesticated by humans and remains among the major contributors to the global calorie and protein budget. The rapidly expanding world population demands further enhancement of yield and performance of wheat. Phenotypic information has historically been instrumental in wheat breeding for improved traits. In the last two decades, a steadily growing collection of tools and imaging software have given us the ability to quantify shoot, root, and seed traits with progressively increasing accuracy and throughput. This review discusses challenges and advancements in image analysis platforms for wheat phenotyping at the organ level. Perspectives on how these collective phenotypes can inform basic research on understanding wheat physiology and breeding for wheat improvement are also provided.

Performances Evaluation of a Low-Cost Platform for High-Resolution Plant Phenotyping

This study aims to test the performances of a low-cost and automatic phenotyping platform, consisting of a Red-Green-Blue (RGB) commercial camera scanning objects on rotating plates and the reconstruction of main plant phenotypic traits via the structure for motion approach (SfM). The precision of this platform was tested in relation to three-dimensional (3D) models generated from images of potted maize, tomato and olive tree, acquired at a different frequency (steps of 4°, 8° and 12°) and quality (4.88, 6.52 and 9.77 µm/pixel). Plant and organs heights, angles and areas were extracted from the 3D models generated for each combination of these factors. Coefficient of determination (R²), relative Root Mean Square Error (rRMSE) and Akaike Information Criterion (AIC) were used as goodness-of-fit indexes to compare the simulated to the observed data. The results indicated that while the best performances in reproducing plant traits were obtained using 90 images at 4.88 µm/pixel (R² = 0.81, rRMSE = 9.49% and AIC = 35.78), this corresponded to an unviable processing time (from 2.46 h to 28.25 h for herbaceous plants and olive trees, respectively). Conversely, 30 images at 4.88 µm/pixel resulted in a good compromise between a reliable reconstruction of considered traits (R² = 0.72, rRMSE = 11.92% and AIC = 42.59) and processing time (from 0.50 h to 2.05 h for herbaceous plants and olive trees, respectively). In any case, the results pointed out that this input combination may vary based on the trait under analysis, which can be more or less demanding in terms of input images and time according to the complexity of its shape (R² = 0.83, rRSME = 10.15% and AIC = 38.78). These findings highlight the reliability of the developed low-cost platform for plant phenotyping, further indicating the best combination of factors to speed up the acquisition and elaboration process, at the same time minimizing the bias between observed and simulated data.