The use of a novel deer antler decellularized cartilage-derived matrix scaffold for repair of osteochondral defects

Integrated Transcriptomic and Proteomic Analyses of Antler Growth and Ossification Mechanisms

Antlers are the sole mammalian organs capable of continuous regeneration. This distinctive feature has evolved into various biomedical models. Research on mechanisms of antler growth, development, and ossification provides valuable insights for limb regeneration, cartilage-related diseases, and cancer mechanisms. Here, ribonucleic acid sequencing (RNA-seq) and four-dimensional data-independent acquisition (4D DIA) technologies were employed to examine gene and protein expression differences among four tissue layers of the Chinese milu deer antler: reserve mesenchyme (RM), precartilage (PC), transition zone (TZ), cartilage (CA). Overall, 4611 differentially expressed genes (DEGs) and 2388 differentially expressed proteins (DEPs) were identified in the transcriptome and proteome, respectively. Among the 828 DEGs common to both omics approaches, genes from the collagen, integrin, and solute carrier families, and signaling molecules were emphasized for their roles in the regulation of antler growth, development, and ossification. Bioinformatics analysis revealed that in addition to being regulated by vascular and nerve regeneration pathways, antler growth and development are significantly influenced by numerous cancer-related signaling pathways. This indicates that antler growth mechanisms may be similar to those of cancer cell proliferation and development. This study lays a foundation for future research on the mechanisms underlying the rapid growth and ossification of antlers.

Preliminary study on the preparation of antler powder/chitosan/β-glycerophosphate sodium/polyvinyl alcohol porous hydrogel scaffolds and their osteogenic effects

Introduction: The production of bone-like structural scaffolds through bone tissue engineering technology is a promising method for bone regeneration to repair bone defects. Deer antler, an easily harvested and abundantly sourced initial bone tissue structure, resembles the composition and structure of human cancellous bone and can serve as a new material for allogeneic bone transplantation. Methods: This study involved the preparation and characterization of antler powder/chitosan/β-glycerophosphate sodium/polyvinyl alcohol (AP/CS/β-GP/PVA) porous hydrogel scaffolds to verify their material properties and osteogenic mechanisms. The microstructure, hydrophilicity, and mechanical properties of the scaffolds were studied using Scanning Electron Microscopy (SEM), contact angle measurement, and a universal material testing machine. The interactions between the various components were investigated using Fourier-Transform Infrared Spectroscopy (FTIR). Biocompatibility, osteogenic properties, and expression of osteogenesis-related proteins of the scaffolds were evaluated through Cell Counting Kit-8 (CCK-8) assays, alkaline phosphatase staining, Alizarin Red staining, live/dead cell staining, and Western blot analysis. Results: The results showed that as the content of deer antler powder increased, both the hydrophilicity and mechanical properties of the scaffold materials improved, while the porosity slightly decreased with an increase in deer antler powder content. Cell culture experiments demonstrated that scaffolds with a higher proportion of deer antler powder were beneficial for the proliferation and differentiation of mouse pre-osteoblast (MC3T3-E1) cells, with the scaffolds containing 10% and 8% deer antler powder showing the best effects. The upregulation of RUNX2, OCN, OSX, and OPN protein expression may promote differentiation. Discussion: Therefore, the AP/CS/β-GP/PVA hydrogel scaffolds have the potential to become a promising biomaterial for bone tissue engineering.

In vitro and in vivo efficacy of naturally derived scaffolds for cartilage repair and regeneration

Intrinsically present bioactive cues allow naturally derived materials to mimic important characteristics of cartilage while also facilitating cellular recruitment, infiltration, and differentiation. Such traits are often what tissue engineers desire when they fabricate scaffolds, and yet, literature from the past decade is replete with examples of how most natural constructs with native biomolecules have only offered sub-optimal results in the treatment of cartilage defects. This paper provides an in-depth investigation of the performance of such scaffolds through a review of a collection of natural materials that have been used so far in repairing/regenerating articular cartilage. Although in vivo and clinical studies are the best indicators of scaffold efficacy, it was, however, observed that a large number of natural constructs had very promising scaffold characteristics to begin with, and would often show good in vitro/in vivo results. Finally, an examination of the biochemistry and biomechanics of repair tissues in studies that reported positive outcomes showed that these attributes often approached target cartilage values. The paper concludes with an outline of current trends as well as future directions for the field. STATEMENT OF SIGNIFICANCE: This review offers an exclusive focus on natural scaffold materials for cartilage repair and regeneration and provides a quantitative and qualitative analysis of their performance under a variety of in vitro and in vivo conditions. Readers can learn about environments where natural scaffolds have had the most success and tailor strategies to optimize their own work. Furthermore, given how the glycosaminoglycan (GAG) to hydroxyproline (HYP) ratio and moduli are fundamental attributes of hyaline cartilage, this paper adds to the body of knowledge by exploring how these characteristics reflect in preclinical outcomes. Such perspectives can greatly aid researchers better utilize natural materials for Cartilage Tissue Engineering (CTE).

Lupeol-loaded chitosan-Ag+ nanoparticle/sericin hydrogel accelerates wound healing and effectively inhibits bacterial infection

Lupeol, a pentacyclic triterpene, has demonstrated significant wound healing properties; however, its low water solubility has limited its clinical applicability. To overcome this limitation, we utilized Ag⁺-modified chitosan (CS-Ag) nanoparticles to deliver lupeol, resulting in the formation of CS-Ag-L-NPs. These nanoparticles were then encapsulated within a temperature-sensitive, self-assembled sericin hydrogel. Various analytical methods, including SEM, FTIR, XRD, HPLC, TGA assay, hemolysis and antibacterial activity tests, were employed to characterize the nanoparticles. Additionally, an infectious wound model was used to evaluate the therapeutic and antibacterial efficacy of the CS-Ag-L-NPs modified sericin hydrogel. Our results showed that the encapsulation efficiency of lupeol in CS-Ag-L-NPs reached 62.1 %, with good antibacterial activity against both gram-positive and gram-negative bacteria and a low hemolysis ratio (<5 %). The CS-Ag-L-NPs sericin gel exhibited multiple beneficial effects, including inhibiting bacterial proliferation in wound beds, promoting wound healing via accelerated re-epithelialization, reducing inflammation, and enhancing collagen fiber deposition. We conclude that the CS-Ag-L-NPs loaded sericin hydrogel has tremendous potential for development as a multifunctional therapeutic platform capable of accelerating wound healing and effectively suppressing bacterial infections in clinical settings.

Sika deer velvet antler protein extract modulater bone metabolism and the structure of gut microbiota in ovariectomized mice

Osteoporosis is a systemic osteopathy characterized by bone metabolism disorders that become more serious with age increases in postmenopausal women. Recent studies have found that antler protein is the main bioactive component of cervus pantotrichum, and it has a positive regulatory effect on bone metabolism and can improve estrogen level. This study aimed to investigate the effect of velvet antler extract (VAE) on the prevention of osteoporosis and the modulation of gut microbiota in ovariectomized (OVX) mice. OVX mice treated with 12 weeks of VAE exhibited higher levels of serum BGP, Ca2+, CT, and HyP (p < .05). Micro-CT scans showed that VAE significantly elevated bone volume fraction (BV/TV), trabecular bone number (Tb.N), trabecular bone thickness (Tb.Th), trabecular bone connection density (Conn.D), decreased trabecular separation (Tb.Sp), and structural modality index (SMI) than untreated OVX mice. The right tibial retinaculum in the VAE group was clearer, with a clearer reticular structure, smaller gaps, a tighter distribution, and a more orderly arrangement. The gut microbiota of the cecal contents was analyzed by 16 s rDNA amplicon sequencing. The data indicated that VAE modulated the species, numbers, and diversity of the gut microbiota in OVX mice. Ovariectomy caused dysbiosis of the intestinal microbiota by increasing the ratio of Firmicutes to Bacteroidetes in mice, but the ratio decreased after treatment with VAE. These results suggest that VAE has a therapeutic effect on OVX mice via modulate bone-related biochemical markers in serum and structure of gut microbiota.

Comparison of genome-wide DNA methylation patterns between antler precartilage and cartilage

Deer antlers are the only mammalian organs that can fully regenerate after being lost and provide a valuable model for cartilage development. As one of the best-studied epigenetic mechanisms, DNA methylation is known to engage in organ and tissue development. This study aimed to investigate the role of DNA methylation in antler chondrogenesis by comparing whole-genome DNA methylation between precartilage and cartilage. Quantitative reverse transcription PCR (RT-qPCR) showed significant differences in the expression levels of DNA methyltransferase genes (DNMT1, DNMT3A, and DNMT3B) between precartilage and cartilage. Subsequently, we obtained DNA methylation profiles of antler precartilage and cartilage tissues by whole-genome bisulfite sequencing. Although sequencing data indicated that overall methylation levels at CpG and non-CpG sites were similar between precartilage and cartilage, 140,784 differentially methylated regions (DMRs, P < 0.05) and 3,941 DMR-related genes were identified. Gene ontology (GO) analysis of DMR-related genes demonstrated some significantly enriched GO terms (P < 0.05) related to chondrogenesis, including insulin receptor binding, collage trimer, integrin binding, and extracellular matrix structural constituent. Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis of DMR-related genes uncovered that the PI3K/AKT, cortisol synthesis and secretion, glycosaminoglycan biosynthesis-keratan sulfate, Hippo, and NF-κB signaling pathways might play a pivotal role in the transition of precartilage to cartilage. Moreover, we found that 25 DMR-related genes, including CD44, IGF1, ITGAV, ITGB1, RUNX1, COL2A1, COMP, and TAGLN, were most likely involved in antler chondrogenesis. In conclusion, this study revealed the genome-wide DNA methylation patterns of antler precartilage and cartilage, which may contribute to understanding the epigenetic regulation of antler chondrogenesis.

Preparation and mechanical behavior of the acellular porcine common bile duct and its immunogenicity in vivo

The current clinical treatments for complications caused by hepatobiliary surgery still have some inevitable weaknesses. This study aimed to prepare the acellular porcine common bile duct (APCBD) for repairing biliary defects and damage. The porcine common bile duct was decellularized by the freeze-thaw method combined with nuclease treatment, and the efficacy of acellularization was confirmed by the DNA quantification and histological structure. The results showed that the residual DNA content was reduced from 854.67 ± 9.71 ng/mg to 5.43 ± 0.85 ng/mg, and the natural structure and shape of the bile duct were well preserved. The biomechanical properties such as the tensile strength, elastic modulus, and elongation-at-break of the APCBD in the transverse and longitudinal direction indicated that the APCBD meets the requirements of the biomechanical strength in replacement. In addition, the results of the immunotoxicity test showed there was no significant difference in the body weights, organ coefficient, hematology, and immune histology between the experimental groups (three subgroups) and the negative control group, which demonstrated the prepared APCBD had no obvious toxicity to the immune system in vivo and might be a suitable biomaterial for the bile duct repairing.

Decellularized Extracellular Matrix-Based Bioinks for Tendon Regeneration in Three-Dimensional Bioprinting

In the last few years, attempts to improve the regeneration of damaged tendons have been rising due to the growing demand. However, current treatments to restore the original performance of the tissue focus on the usage of grafts; although, actual grafts are deficient because they often cannot provide enough support for tissue regeneration, leading to additional complications. The beneficial effect of combining 3D bioprinting and dECM as a novel bioink biomaterial has recently been described. Tendon dECMs have been obtained by using either chemical, biological, or/and physical treatments. Although decellularization protocols are not yet standardized, recently, different protocols have been published. New therapeutic approaches embrace the use of dECM in bioinks for 3D bioprinting, as it has shown promising results in mimicking the composition and the structure of the tissue. However, major obstacles include the poor structural integrity and slow gelation properties of dECM bioinks. Moreover, printing parameters such as speed and temperature have to be optimized for each dECM bioink. Here, we show that dECM bioink for 3D bioprinting provides a promising approach for tendon regeneration for future clinical applications.

Characterization of Cervus timorensis Velvet Antler and its Effect on Biofilm Formation of Candida Species

Oral biofilms comprise extracellular polysaccharides and polymicrobial microorganisms. The objectives of the study were to characterize the deer velvet antler (DVA) compounds and their effect on Candida species biofilm formation with the hypothesis that DVA inhibits the biofilm of Candida spp. Liquid Chromatography-Quadrupole Time of Flight-Mass Spectrometry (LC-QTOF-MS) was conducted to characterize the DVA compounds. To study the effect of DVA on biofilm, Candida albicans ATCC MYA-4901 (ALT5), AIDS isolate (ALC2), oral cancer isolate (ALC3), C. dubliniensis ATCC MYA-2975, C. glabrata ATCC 90030, C. krusei 14 243, C. lusitaniae ATCC 34449, C. parapsilosis ATCC 22019, and C. tropicalis ATCC 13803 were inoculated with DVA in separate wells of a 96-well plate containing RPMI-1640 followed by 72 h incubation. A total of 45 compounds were detected in the DVA extract. C. lusitaniae exhibited a higher percentage of biofilm biomass reduction when treated with DVA extract (66.10% ± 5.33), followed by ALC3 (44.12% ± 6.24). However, C. glabrata, C. krusei, and C. parapsilosis showed no reduction in biofilm biomass after being treated with DVA extract. Most Candida strains also exhibited decreased total cell count when treated with DVA extract, except for ALC3 and C. krusei. ALT5 had the lowest total cell count (0.17 × 105 cells/mL) when cultured with DVA extract. In conclusion, DVA extract inhibits Candida spp. biofilm formation except for C. glabrata, C. krusei, and C. parapsilosis.

Recent strategies of collagen-based biomaterials for cartilage repair: from structure cognition to function endowment

Collagen, characteristic in biomimetic composition and hierarchical structure, boasts a huge potential in repairing cartilage defect due to its extraordinary bioactivities and regulated physicochemical properties, such as low immunogenicity, biocompatibility and controllable degradation, which promotes the cell adhesion, migration and proliferation. Therefore, collagen-based biomaterial has been explored as porous scaffolds or functional coatings in cell-free scaffold and tissue engineering strategy for cartilage repairing. Among those forming technologies, freeze-dry is frequently used with special modifications while 3D-printing and electrospinning serve as the structure-controller in a more precise way. Besides, appropriate cross-linking treatment and incorporation with bioactive substance generally help the collagen-based biomaterials to meet the physicochemical requirement in the defect site and strengthen the repairing performance. Furthermore, comprehensive evaluations on the repair effects of biomaterials are sorted out in terms of in vitro, in vivo and clinical assessments, focusing on the morphology observation, characteristic production and critical gene expression. Finally, the challenge of biomaterial-based therapy for cartilage defect repairing was summarized, which is, the adaption to the highly complex structure and functional difference of cartilage.

Graphical abstract