Experimental and theoretical study for removal of trimethoprim from wastewater using organically modified silica with pyrazole-3-carbaldehyde bridged to copper ions

Adsorption of Methylene Blue Dye and Analysis of Two Clays: A Study of Kinetics, Thermodynamics, and Modeling with DFT, MD, and MC Simulations

The purpose of this research was to learn more about the primary and secondary properties of Moroccan natural clay in an effort to better investigate innovative adsorbents and gain access to an ideal adsorption system. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy analysis (SEM-EDX) and X-ray fluorescence were employed for identification. SEM revealed clay grains, including tiny particles and unevenly shaped sticks. First- and second-order rate laws, representing two distinct kinetic models, were applied in the kinetic approach. Adsorption of dye MB onto natural clay was studied, and the results agreed with the 2 s order model. The significant correlation coefficients support the inference that the adsorption process was governed by the Langmuir model. Subsequent DFT analyses demonstrated that the methylene blue dye's HOMO and LUMO surfaces are dispersed across most of the dye's components, pointing to a strong interaction with the clay. To determine how the dye might be adsorbed onto the clay, we employed quantum descriptors to locate its most nucleophilic and electrophilic centers. Endothermic reactions are evident during the MB adsorption process on clay, as indicated by the positive values of ΔH0 and ΔS0 (70.49 kJ mol-1of RC and 84.19 kJ mol-1 of OC and 10.45 J mol-1 K-1 of RC and 12.68 mol-1 K-1 of OC, respectively). Additionally dye molecules on the adsorbent exhibit a higher order of distribution than in the solution, indicating that the adsorption process is spontaneous.

A chemometric approach based on response surface methodology for optimization of antibiotic and organic dyes removal from water samples

In this study, the Fe3O4/rGO/Ag magnetic nanocomposite was synthesized and employed as an adsorbent for the removal of tetracycline (TC), crystal violet (CV), and methylene blue (MB) from water samples. The influential parameters in the removal process were identified and optimized using response surface methodology (RSM). Characterization of the product was performed through field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), vibrating-sample magnetometer (VSM), and X-ray diffraction (XRD) analysis. XRD and SEM analysis revealed the successful synthesis of the Fe3O4/rGO/Ag nanocomposite. EDX analysis elucidated the accuracy and clarity of the chemical composition of the magnetic nanocomposite structure. Additionally, the separation of the nano-adsorbent from the solution can be achieved using a magnetic field. Maximum removal of analytes was obtained at pH of 6, amount of nanocomposite 0.014 g, ultrasonic time of 8 min and concentration of 21 mg L-1. Under optimal conditions, the removal efficiencies for TC, CV, and MB were 91.33, 95.82, and 98.19%, respectively. Also, it was observed that after each adsorption-desorption cycle, Fe3O4/rGO/Ag magnetic nanocomposite had good stability to remove TC, CV, and MB. Achieving nearly 98% removal efficiency in optimal conditions showed that Fe3O4/rGO/Ag magnetic nanocomposite is an effective adsorbent for removing TC, CV, and MB from wastewater samples.

A hybrid nanocomposite based on CuFe layered double hydroxide coated graphene oxide for photocatalytic degradation of trimethoprim

Photocatalytic activation of persulfate (PS) has recently been considered an effective and environmentally friendly approach for antibiotic decomposition due to its high treatment efficiency, low energy consumption, and high reliability. The development of safe and high-performance catalysts is important for PS-based advanced oxidation processes. In this study, a CuFe-layered double hydroxide (LDH) coated graphene oxide (CuFe-LDH/GO) composite was constructed as a photocatalyst for trimethoprim (TMP) decomposition. The CuFe-LDH/GO catalyst was prepared via the co-precipitation method and characterized through Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and X-ray electron microscopy (XPS) techniques. Characterization results revealed that GO was entirely covered by LDH platelets which also kept its hydrotalcite structure in the as-prepared nanocomposite. The average crystallite size of CuFe-LDH/GO was 28.22 nm. The results confirmed that CuFe-LDH/GO exhibited excellent performance for the PS activation with a TMP removal efficiency of 90.8% under UV-light irradiation. Compared with pristine CuFe-LDH, the rate constant of TMP degradation of CuFe-LDH/GO was doubled. The results also indicated that acidic and alkaline conditions were not favorable for TMP degradation, and the catalytic activity of the used photocatalyst has not decreased significantly after 720 h of continuous recycling. Overall, CuFe-LDH/GO could be a promising photocatalyst for the treatment of wastewater containing antibiotics.

Green synthesis of Ag2O nanoparticles using Punica granatum leaf extract for sulfamethoxazole antibiotic adsorption: characterization, experimental study, modeling, and DFT calculation

Silver oxide (Ag₂O) nanoparticles (NPs) were generated by synthesizing green leaf extract of Punica granatum, and afterwards they were used as adsorbent to remove the antibiotic additive sulfamethoxazole (SMX) from aqueous solutions. Prior of their use as adsorbent, the Ag₂O NPs were characterized by various methods such as X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), scanning electron microscopy/energy-dispersive X-ray (SEM-EDX), and transmission electron microscopy (TEM). The Ag₂O NPs were found to be spherically shaped and stabilized by the constituents of the extract. Further, at SMX antibiotic concentration of 100 mg L^-1, the Ag₂O NPs achieved almost complete removal of 98.93% within 90 min, and by using 0.8 g L^-1 of adsorbent dose at pH=4 and temperature T=308 K. In addition, the experimental data were well fitted with the theoretical Langmuir model indicating homogeneous adsorbed layer of the SMX antibiotic on the Ag₂O NPs surface. The maximum uptake capacity was 277.85 mg g^-1. A good agreement was also found between the kinetic adsorption data and the theoretical pseudo-second-order model. Regarding the thermodynamic adsorption aspects, the data revealed an endothermic nature and confirmed the feasibility and the spontaneity of the adsorption reaction. Furthermore, the regeneration study has shown that the Ag₂O NPs could be efficiently reused for up to five cycles. The geometric structures have been optimized and quantum chemical parameters were calculated for the SMX unprotonated (SMX^+/-) and protonated (SMX⁺) using density functional theory (DFT) calculation. The DFT results indicated that the unprotonated SMX^+/- reacts more favorably on the Ag₂O surface, as compared to the protonated SMX⁺. The SMX binding mechanism was predominantly controlled by the electrostatic attraction, hydrogen bond, hydrophobic, and π-π interactions. The overall data suggest that the Ag₂O NPs have promising potential for antibiotic removal from wastewater.