A new direction in managing avulsed teeth: stem cell-based de novo PDL regeneration

Exploring the impact of culture techniques and patient demographics on the success rate of primary culture of human periodontal ligament stem cells

Background/purpose

Periodontal ligament stem cells (PDLSCs) have the potential for regenerating periodontal tissue. The study aims to investigate the impact of demographics (ages, gender, disease) and culture techniques (shipping storage time and culture method) on the success of primary culture.

Materials and methods

PDLSCs were collected from 51 teeth of 26 patients and cultured via outgrowth (OG) and enzymatic digestion (ED) methods. Cells characteristics were confirmed by flow cytometry, MTT, and ARS. The primary culture success rate was evaluated with a serial chi-square test to determine the relationship with culture technique (ED/OG and ≤4 h/prolonged culture) and patient demographics (Young/Old, Female/Male, and Health/Periodontitis).

Results

The overall success rate of Health group (69.7%) was higher than Periodontitis (38.9%). Culturing within 4 h possessed a higher success rate (71.8%) than prolonged group (16.7%) regardless of patient demographics, and using OG method (81.5%) revealed more promising. Subgroup analysis of 39 cases (culture within 4 h) found that the success rate of OG was higher than ED in the Old group (87.5%-25.0%) and in the Periodontitis group (83.3%-25.0%).

Conclusion

Primary culturing of PDLSCs within 4 h and using the outgrowth method led to higher success rates regardless of patient demographics. It can achieve successful PDLSCs culture of older patients or patients with periodontal disease by appropriate culture technique.

Evaluating the effect of strontium ranelate and photobiomodulation on cementogenic and osteogenic differentiation of buccal fat pad-derived stem cells: An in vitro study

This study aimed to analyze the impact of strontium ranelate (Str), photobiomodulation (PBM), or their combination of the proliferation, osteogenic differentiation, and cementogenic differentiation of buccal fat pad-derived stem cells. BFPdSCs were exposed to one of the following interventions: (1) PBM (660 nm), (2) PBM (660 nm) + Str, (3) PBM (880 nm), (4) PBM (880 nm) + Str, (5) Str. All study groups had significantly higher osteogenic differentiation than the control group (p < 0.05), and no significant difference existed between the 660 and 808 nm groups (p = 0.97). Compared to the Str group, 660 nm and 880 nm group samples had significantly lower osteogenic differentiation (p < 0.0001), while other groups did not show a significant difference. Regarding cementogenic differentiation, the 660 nm group showed higher values than the 808 nm group (p < 0.01). Compared with the Str group, 660 nm, 660 nm + Str, and 808 nm + Str groups showed significantly higher gene expression (p < 0.05). In the case of osteogenic differentiation, although photobiomodulation alone had a lower inducing effect than strontium ranelate, combining 808 nm diode lasers and strontium ranelate may provide the best results. Moreover, using a 660 nm diode laser and exposing stem cells to strontium ranelate can be the most effective approach to induce cementogenic differentiation.

Effect of icariin surface treatment on the resorption of denuded roots after replantation in rat

AIM

Limiting the incidence of resorption associated with delayed replantation of avulsed teeth is critical for long-term tooth survival. In this study, we assessed whether icariin, a natural product with anti-osteoclastic properties, could reduce root resorption in a rat model of tooth replantation.

METHODOLOGY

Cytocompatibility of icariin (10, 20, 40 and 80 μM) was evaluated by CCK-8 proliferation assay in vitro, and an osteoclastogenesis assay was performed to evaluate the effect of icariin on the differentiation of rat bone marrow macrophages and human peripheral blood monocytes into tartrate-resistant acid phosphatase-stained (TRAP+ ) multinucleated giant cells (MNGCs). Differentiation of human periodontal ligament stem cells (hPDLSCs) treated with icariin (10 μM) was also evaluated at 5, 10 and 21 days of osteogenic induction. The first maxillary molars of five-week-old male Sprague-Dawley rats were extracted, denuded of PDL, then treated either with neutralized collagen solution (Carrier control) or icariin in collagen (3 μg/μL) before replantation into their sockets. The animals were euthanized 2 weeks post-surgery for micro-computed tomography (micro-CT) imaging and histological analyses.

RESULTS

Icariin was cytocompatible and significantly reduced the differentiation of TRAP+ MNGCs in a dose-dependent manner compared to the control. Moreover, icariin enhanced alkaline phosphatase activity, expression of osteogenic marker genes and proteins, and calcium deposition in hPDLSCs. Micro-CT imaging of the replanted samples demonstrated a significantly higher volume of remaining roots in the icariin-treated group than in the control group. Histological analysis revealed a marked number of resorptive lacunae with TRAP activity in the control group, whereas icariin-treated samples showed signs of functional healing and reduced osteoclastic activity.

CONCLUSIONS

Icariin was biocompatible and demonstrated potent anti-osteoclastic and pro-osteogenic properties that reduced resorption and promoted functional healing of denuded roots in a rat maxillary first molar model of replantation. These findings indicate that root surface treatment with icariin may be a clinically relevant and practical method for improving the retention and survival of teeth with compromised PDL after delayed replantation following traumatic avulsion.

Gene-Activated Materials in Regenerative Dentistry: Narrative Review of Technology and Study Results

Treatment of a wide variety of defects in the oral and maxillofacial regions requires the use of innovative approaches to achieve best outcomes. One of the promising directions is the use of gene-activated materials (GAMs) that represent a combination of tissue engineering and gene therapy. This approach implies that biocompatible materials will be enriched with gene-carrying vectors and implanted into the defect site resulting in transfection of the recipient's cells and secretion of encoded therapeutic protein in situ. GAMs may be presented in various designs depending on the type of material, encoded protein, vector, and way of connecting the vector and the material. Thus, it is possible to choose the most suitable GAM design for the treatment of a particular pathology. The use of plasmids for delivery of therapeutic genes is of particular interest. In the present review, we aimed to delineate the principle of work and various designs of plasmid-based GAMs and to highlight results of experimental and clinical studies devoted to the treatment of periodontitis, jaw bone defects, teeth avulsion, and other pathologies in the oral and maxillofacial regions.

Successful outcome of permanent maxillary incisor reimplanted after 30 hours of extra-oral time-a case report with 5-year follow-up

Key Clinical Message

Tooth reimplantation should be attempted in every possible case with thorough disinfection and impervious obturation. Integration of progressive innovations with recommended protocols can enhance complication free survival in intense situations.

Abstract

The present case describes the unique successful outcome of a tooth reimplanted after the delay of 30 hours. A 21-year old male patient presented with an avulsed #21 after a fall due to electric shock. It was reimplanted according IADT guidelines with the addition of specific irrigation sequence proposed for regenerative endodontic procedures during the endodontic treatment. The final obturation was accomplished by combination of Biodentine and BioRCS root-canal sealer. Subluxated #11 developed symptoms at 6 months and was further managed using recommended endodontic procedure. Both teeth had complication free survival during 5 year follow-up.

Mesenchymal condensation in tooth development and regeneration: a focus on translational aspects of organogenesis

The teeth are vertebrate-specific, highly specialized organs performing fundamental functions of mastication and speech, the maintenance of which is crucial for orofacial homeostasis and is further linked to systemic health and human psychosocial well-being. However, with limited ability for self-repair, the teeth can often be impaired by traumatic, inflammatory, and progressive insults, leading to high prevalence of tooth loss and defects worldwide. Regenerative medicine holds the promise to achieve physiological restoration of lost or damaged organs, and in particular an evolving framework of developmental engineering has pioneered functional tooth regeneration by harnessing the odontogenic program. As a key event of tooth morphogenesis, mesenchymal condensation dictates dental tissue formation and patterning through cellular self-organization and signaling interaction with the epithelium, which provides a representative to decipher organogenetic mechanisms and can be leveraged for regenerative purposes. In this review, we summarize how mesenchymal condensation spatiotemporally assembles from dental stem cells (DSCs) and sequentially mediates tooth development. We highlight condensation-mimetic engineering efforts and mechanisms based on ex vivo aggregation of DSCs, which have achieved functionally robust and physiologically relevant tooth regeneration after implantation in animals and in humans. The discussion of this aspect will add to the knowledge of development-inspired tissue engineering strategies and will offer benefits to propel clinical organ regeneration.

Collagen Scaffolds Laden with Human Periodontal Ligament Fibroblasts Promote Periodontal Regeneration in SD Rat Model

Periodontitis, a chronic inflammatory disease caused by microbial communities carrying pathogens, leads to the loss of tooth-supporting tissues and is a significant contributor to tooth loss. This study aims to develop a novel injectable cell-laden hydrogel consisted of collagen (COL), riboflavin, and a dental light-emitting diode (LED) photo-cross-linking process for periodontal regeneration. Utilizing α-SMA and ALP immunofluorescence markers, we confirmed the differentiation of human periodontal ligament fibroblasts (HPLFs) into myofibroblasts and preosteoblasts within collagen scaffolds in vitro. Twenty-four rats with three-wall artificial periodontal defects were divided into four groups, Blank, COL_LED, COL_HPLF, and COL_HPLF_LED, and histomorphometrically assessed after 6 weeks. Notably, the COL_HPLF_LED group showed less relative epithelial downgrowth (p < 0.01 for Blank, p < 0.05 for COL_LED and COL_HPLF), and the relative residual bone defect was significantly reduced in the COL_HPLF_LED group compared to the Blank and the COL_LED group (p < 0.05). The results indicated that LED photo-cross-linking collagen scaffolds possess sufficient strength to withstand the forces of surgical process and biting, providing support for HPLF cells embedded within them. The secretion of cells is suggested to promote the repair of adjacent tissues, including well-oriented periodontal ligament and alveolar bone regeneration. The approach developed in this study demonstrates clinical feasibility and holds promise for achieving both functional and structural regeneration of periodontal defects.

Novel In Situ-Cross-Linked Electrospun Gelatin/Hydroxyapatite Nonwoven Scaffolds Prove Suitable for Periodontal Tissue Engineering

Periodontal diseases affect millions of people worldwide and can result in tooth loss. Regenerative treatment options for clinical use are thus needed. We aimed at developing new nonwoven-based scaffolds for periodontal tissue engineering. Nonwovens of 16% gelatin/5% hydroxyapatite were produced by electrospinning and in situ glyoxal cross-linking. In a subset of scaffolds, additional porosity was incorporated via extractable polyethylene glycol fibers. Cell colonization and penetration by human mesenchymal stem cells (hMSCs), periodontal ligament fibroblasts (PDLFs), or cocultures of both were visualized by scanning electron microscopy and 4′,6-diamidin-2-phenylindole (DAPI) staining. Metabolic activity was assessed via Alamar Blue^® staining. Cell type and differentiation were analyzed by immunocytochemical staining of Oct4, osteopontin, and periostin. The electrospun nonwovens were efficiently populated by both hMSCs and PDLFs, while scaffolds with additional porosity harbored significantly more cells. The metabolic activity was higher for cocultures of hMSCs and PDLFs, or for PDLF-seeded scaffolds. Periostin and osteopontin expression was more pronounced in cocultures of hMSCs and PDLFs, whereas Oct4 staining was limited to hMSCs. These novel in situ-cross-linked electrospun nonwoven scaffolds allow for efficient adhesion and survival of hMSCs and PDLFs. Coordinated expression of differentiation markers was observed, which rendered this platform an interesting candidate for periodontal tissue engineering.