Screening for efficient nitrogen sources for overproduction of the biomass of the functionally probiotic L. plantarum strain RPR42 in a cane molasses-based medium

A novel Lactiplantibacillus plantarum strain: probiotic properties and optimization of the growth conditions by response surface methodology

The objective of this study is to explore the probiotic properties and optimal growth conditions of Lactiplantibacillus plantarum BG24. L. plantarum BG24 exhibited a remarkable ability to utilize lactose, and to grow under acidic conditions and in the presence of high levels of bile salts. The strain showed the highest antibacterial activity against L. monocytogenes Scott A (zone of inhibition: 26 mm). L. plantarum BG24 was found to be resistant to 8 of the tested 19 antibiotics using the disc diffusion method.and its multiple antibiotic resistance (MAR) index was calculated as 0.421. The adhesion rate to human intestinal epithelial Caco-2 cells was determined as 37.51%. The enzyme profile of L. plantarum BG24 was investigated using API ZYM test kit and the highest enzymatic activities were found for Leucine arylamidase, β-glucosidase, Valine arylamidase, β-galactosidase and N-acetyl-β-glucosaminidase. L. plantarum BG24 strain showed higher microbial growth under static conditions (6.60 OD600) compared to 100 rpm (5.73 OD600) and 200 rpm (5.02 OD600) shaking speed due to its facultative anaerobic characteristic. However, different inoculation rates and glucose addition did not make a statistically significant difference on biomass formation (p > 0.05). The specific growth rate of L. plantarum BG24 was 0.416 h-1, the doubling time was 1.67 h, and the biomass productivity value was 0.14 gL-1 h-1 in the original MRS broth (pH 5.7) while higher values were found as 0.483 h-1, 1.43 h and 0.17 gL-1 h-1, respectively, in MRS broth (pH 6.5) medium enriched with 5 g/L yeast extract. The stirred tank bioreactor was used to optimise the growth of BG24 strain. The process variables was optimized at 0.05 vvm of aeration rate, 479 rpm of agitation speed, 3% of inoculation rate and 18 h of incubation time. The maximum biomass (g/L) production was obtained as 3.84 g/L at the optimized conditions.

Production of a potential multistrain probiotic in co-culture conditions using agro-industrial by-products-based medium for fish nutrition

BACKGROUND

Probiotics are viable microorganisms that when administered in adequate amounts confer health benefits to the host. In fish, probiotic administration has improved growth, and immunological parameters. For this reason, it is necessary production of probiotic bacteria, however, commercial culture mediums used for probiotic growth are expensive, so the design of a "low" cost culture medium is necessary. Therefore, this research aimed to produce a potential multistrain probiotic preparation composed of L. lactis A12 and Priestia species isolated from Nile tilapia (Oreochromis niloticus) gut using an agro-industrial by-products-based culture medium.

RESULTS

A Box-Behnken design with three factors (whey, molasses, and yeast extract concentration) was used. As the main results, a high concentration of three components enhanced the viability of L. lactis A12, however, viable cell counts of Priestia species were achieved at low molasses concentrations. The Optimal conditions were 1.00% w/v whey, 0.50% w/v molasses, and 1.50% w/v yeast extract. L. lactis A12 and Priestia species viable counts were 9.43 and 6.89 Log10 CFU/mL, respectively. L. lactis A12 concentration was higher (p < 0.05) in the proposed medium compared to commercial broth.

CONCLUSIONS

It was possible to produce L. lactis A12 and Priestia species in co-culture conditions. Whey and molasses were suitable components to produce the multistrain preparation. The cost of the proposed culture medium was 77.54% cheaper than the commercial medium. The proposed culture medium could be an alternative to commercial mediums for the production of this multistrain probiotic.

Alternative culture medium design for biomass production of autochthonous meat starter Latilactobacillus sakei sp. sakei ACU-2

The autochthonous strain Latilactobacillus sakei sp. sakei ACU-2 was selected as a meat starter culture for dry sausage production. Transferring this strain from laboratory scale to industry requires an increase in biomass production, while lowering process costs. In this study, a combination of techniques was applied in order to optimize the culture medium composition to enhance biomass production of L. sakei ACU-2. One variable at a time experiments, Plackett-Burman design, and mixture design were performed to fulfill the strain nutritional requirements. Eventually, the optimized formulation contained 19.46 g/L yeast extract; 8.28 g/L whey protein concentrate; 2.26 g/L soy peptone; 30 g/L cerelose; 1 g/L Tween 80; 5 g/L sodium acetate; 0.2 g/L magnesium sulfate and 0.05 g/L manganese sulfate. When L. sakei ACU-2 was cultivated in a bioreactor using the alternative medium, an enhancement of 75.5% of biomass production was achieved, in comparison to its growth in the commercial de Man, Rogosa, and Sharpe medium. Furthermore, a reduction of 62-86% of the cost was also attained. These results support a promising large-scale application of the designed medium for high biomass yields of the starter culture at minor costs.

Nitrogen source: an effective component for the growth and viability of Lactobacillus delbrueckii subsp. bulgaricus

In this study, we developed and optimized a growth media by evaluating various nitrogen sources for the cultivation of Lactobacillus bulgaricus, a probiotic and an important dairy starter culture. We modified the composition of deMan, Rogosa and Sharpe (MRS) culture media and substituted the nitrogen content with alternative nitrogen sources X-Seed KAT, X-Seed Carbo Max and X-Seed Nucleo Max in various blends of 5 g/l and 10 g/l respectively. Results showed that bacterial growth was significantly higher when the nitrogen source blend KCMax (10/10) was used. The optical density (OD610 nm) of the Lactobacillus bulgaricus strains were higher (1.34 and 1.79) in the KCMax (10/10) medium than in the MRS medium (0.89 and 1.42) (P < 0.05). There was no significant difference in the bacterial counts for both the MRS medium and the KCMax (10/10) medium, and all bacterial counts were estimated at 8 log CFU/ml. The buffering capacity of KCMax (10/10) was also tested and supplemented with l-histidine and was significantly different (P < 0.05) than that of the MRS control medium. Calcium supplemented in the KCMax (10/10) also served as a cryoprotectant for the cells during freezing and freeze-drying. Bacterial counts of the recovered calcium-treated freeze-dried cells were statistically significant (P < 0.05). We hypothesized that alternative nitrogen sources such as selected yeast extracts from the X-Seed brand of complex nitrogen sources could efficiently support the viability of Lb. bulgaricus. Our results thus suggested the growth of Lb. bulgaricus was efficiently supported by the X-Seed KAT, X-Seed Nucleo Max and X-Seed Carbo Max nitrogen sources. Consequently, these alternative nitrogen sources could potentially be recommended for dairy starter culture fermentations.

Novel Probiotic/Bacterial Cellulose Biocatalyst for the Development of Functional Dairy Beverage

The development of innovative functional products with potential health benefits, under the concept of bio-economy, is flourishing. This study undertook an evaluation of non-dairy lactobacilli Lactiplantibacillus pentosus B329 and Lactiplantibacillus plantarum 820 as “ready to use” starter cultures. Lactic acid bacteria (LAB) cultures were evaluated for their fermentation efficiency, before and after freeze-drying, using cheese whey (CW) as a fermentation substrate and subsequent immobilization on bacteria cellulose (BC) to produce a novel biocatalyst. The biocatalyst was applied in functional sour milk production and compared with free cells via the assessment of physicochemical and microbiological properties and sensory evaluation. Evidently, LAB strains exhibited high fermentative activity before and after freeze-drying. Results of a 5-month storage stability test showed that viability was 19% enhanced by immobilization on BC, supporting the concept of “ready to use” cultures for the production of fermented beverages. Likewise, sour milk produced by the BC biocatalyst presented higher organoleptic scores, compared to the free cells case, whereas immobilization on BC enhanced probiotic viability during post-fermentation storage (4 °C, 28 days). The obtained high viability (>107 log cfu/g) demonstrated the efficacy of the proposed bioprocess for the production of functional/probiotic-rich beverages. Ultimately, this work presents a consolidated scheme that includes the advantages and the cooperative effect of probiotic LAB strains combined with a functional biopolymer (BC) towards the formulation of novel functional products that coincide with the pillars of food systems sustainability.

Bioactive Ingredients Obtained from Agro-industrial Byproducts: Recent Advances and Innovation in Micro- and Nanoencapsulation

The agro-industry produces numerous byproducts that are currently underused, and its waste contributes to environmental pollution. These byproducts represent an important and economical source of bioactive ingredients, which can promote the sustainable development of high-value-added functional foods. In this context, micro- and nanoencapsulation systems allow for the incorporation and stabilization of the bioactive agents in foods. This perspective will review recent advances in the use of agro-industrial byproducts as a source of bioactive agents. In addition, the latest advances in micro- and nanoencapsulation to improve the stability, solubility, and bioaccessibility of bioactive agents as functional food ingredients are exposed.

Using Various Approaches of Design of Experiments for High Cell Density Production of the Functionally Probiotic Lactobacillus plantarum Strain RPR42 in a Cane Molasses-based Medium

Considering the economic importance of the probiotics, industrial production of their biomass became important. Cane molasses, as an industrial byproduct, was used in this study to design a medium for biomass overproduction of a functionally probiotic strain, designated as Lactobacillus plantarum strain RPR42. The results showed that strain RPR42 can be best grown anaerobically in 22.5% cane molasses solution. Also, the findings of the single variable at a time experiments and either factorial design indicated that the optimal growth of strain RPR42 can be observed when beef extract, casein hydrolysate, and yeast extract were added into the medium. The central composite design experiments suggested a medium which was designated as cane molasses medium (CMM). Eventually, this medium contained 21.9% cane molasses, 30.72 g/L of a combined mixture of nitrogenous compounds: 0.0754% of a 1:1:1 mixture of polysorbates 20, 60, and 80, and 18.53 gr/L of the combined minerals. Such an optimized cane molasses-based medium supported a significant biomass production since a considerably high cell density, 13.8 g/L/24 h of dry biomass, of the strain was produced. Hence, cane molasses can be regarded as a promising substrate for industrial production purposes.