Tannery wastewater treatment: conventional and promising processes, an updated 20-year review

Selective Isolation and Identification of Microorganisms with Dual Capabilities: Leather Biodegradation and Heavy Metal Resistance for Industrial Applications

Tanning, crucial for leather production, relies heavily on chromium yet poses risks due to chromium's oxidative conversion, leading to significant wastewater and solid waste generation. Physico-chemical methods are typically used for heavy metal removal, but they have drawbacks, prompting interest in eco-friendly biological remediation techniques like biosorption, bioaccumulation, and biotransformation. The EU Directive (2018/850) mandates alternatives to landfilling or incineration for industrial textile waste management, highlighting the importance of environmentally conscious practices for leather products' end-of-life management, with composting being the most researched and viable option. This study aimed to isolate microorganisms from tannery wastewater and identify those responsible for different types of tanned leather biodegradation. Bacterial shifts during leather biodegradation were observed using a leather biodegradation assay (ISO 20136) with tannery and municipal wastewater as the inoculum. Over 10,000 bacterial species were identified in all analysed samples, with 7 bacterial strains isolated from tannery wastewaters. Identification of bacterial genera like Acinetobacter, Brevundimonas, and Mycolicibacterium provides insights into potential microbial candidates for enhancing leather biodegradability, wastewater treatment, and heavy metal bioremediation in industrial applications.

Tannery sludge valorization through zeolite-assisted anaerobic process for short-chain fatty acids (SCFAs) production

Tannery sludge, a challenging waste, was utilized as a substrate for the production of Short-Chain Fatty Acids (SCFAs) through a series of six thermophilic Continuous Stirred-Tank Reactor runs. The sludge was subjected to a mild thermal pre-treatment and incorporated zeolites (chabazite in run II, and clinoptilolite in run III) in the acidification process. Results highlighted zeolites' impact on chromium concentration and the SCFAs/CODSOL ratio. Ammonia release remained consistent at around 47 % and 51 % for run I and II, respectively, but surpassed 60% in run III, suggesting limited zeolite effectiveness in NH4 absorption. Chromium release in the liquid fraction, due to thermal pretreatment, reached 335 mg/L. While in tests without zeolite, complete removal proved challenging, in zeolite-amended runs, complete removal was achieved, showcasing the materials' heavy metal absorption capacity. SCFA concentrations reached 20260 mgCOD/L, with acidification efficiency varying; runs I and III had ratios around 0.70 COD/COD, while run II showed substantial improvement (0.92) with chabazite. Anaerobic fermentation-digestion mass balance indicated a 41% reduction in landfill sludge mass, reducing its environmental footprint while yielding valuable byproducts like biogas and SCFAs. These findings underscore zeolites' potential in heavy metal absorption and acidification process enhancement, paving the way for applications with tannery sludge.

Recovery of Cerium Salts from Sewage Sludge Resulting from the Coagulation of Brewery Wastewater with Recycled Cerium Coagulant

Due to the high cost and limited sources of cerium coagulants, it is extremely important to take measures to recycle this raw material. This paper presents the new possibility of recovering cerium(III) chloride, cerium(III) sulphate, cerium(IV) sulphate, and potentially phosphate from sewage sludge (101.5 g/kg Ce and 22.2 g/kg total P) through a brewery wastewater treatment process using recycled CeCl3 as a coagulant. In order to recover the Ce and P, the sludge was subjected to extraction using an HCl solution. Optimal process conditions were determined by means of central composite design and response surface methodology (CCD/RSM) for three input parameters (HCl mass, reaction time, and extractant volume). Under optimal conditions (0.35 g HCl per 1 g of sludge, 40 min reaction time, extractant volume of 25 mL per 1 g of sludge), the highest efficiency obtained was 99.6% and 97.5% for Ce and P, respectively. Cerium(III) oxalate as Ce2(C2O4)3∙10H2O was precipitated from the obtained solution using H2C2O4 (99.97%) and decomposed into CeO2 (at 350 °C), which was afterwards subjected to a reaction with HCl (30%, m/m) and H2O2 (30%, m/m), which led to the crystallisation of CeCl3∙7H2O with a purity of 98.6% and a yield of 97.0%. The obtained CeO2 was also subjected to a reaction with H2SO4 (96%, m/m) and H2O2 (30%, m/m), which produced Ce2(SO4)3 with a yield of 97.4%. The CeO2 was also subjected to a reaction with only H2SO4 (96%, m/m), which produced Ce(SO4)2 with a yield of 98.3%. The filtrate obtained after filtering the Ce2(C2O4)3∙10H2O contained 570 mg/L of P, which enabled its use as a source of phosphorus compounds. The presented processes of Ce and potentially P recovery from sewage sludge originating from brewery wastewater contribute to the idea of a circular economy.

NaH2PO4 synergizes with organic matter to stabilize chromium in tannery sludge

Heavy metal stabilization is an effective method to treat chromium in tannery sludge. Here we show that mainly investigated NaH2PO4 (MSP) and organic matter (OM) to stabilize chromium in tannery sludge. The experimental investigation revealed that the addition of montmorillonite (MMT) and MSP samples showed a significant increase in the percentage of reducible and oxidizable Cr in the former compared to the samples with the addition of MMT. This is attributed to the formation of Cr-O bond, which allows the MSP to undergo an inner-sphere complexation reaction with the metal oxide of Cr via ligand exchange. Significantly, the MSP moiety adsorbs on the surface of OM through monodentate, which increases the adsorption sites of OM for Cr6+ and promotes the reduction of Cr6+ to Cr3+. Moreover, PO43- reacts with Cr3+ to produce CrPO4 precipitation, thus reducing the free Cr3+ content. Finally, DFT calculations confirmed that a ternary system is formed between PO43-, OM, and Cr, and the binding energy is negative, which indicated that PO43- could co-stabilize Cr with OM.

Compressible polydopamine modified pomelo peel powder/poly(ethyleneimine)/κ-carrageenan aerogel with pH-tunable charge for selective removal of anionic and cationic dyes

In this work, a novel biomass-based aerogel, polydopamine decorated pomelo peel powder/polyethyleneimine/κ-carrageenan (PPEKC) aerogel, was developed for dye wastewater treatment. The as-prepared PPEKC aerogel possessed a robust structure and good compressible resilience. As expected, this aerogel presented remarkable efficacy in eliminating both anionic and cationic dyes. The experimental maximum adsorption capacities were 2016.7 mg g-1 for congo red (CR) at pH = 5 and 1176.6 mg g-1 for methylene blue (MEB) at pH = 11, following with ultra-fast adsorption rates. The adsorption kinetics followed the pseudo-second-order model. The adsorption isotherms exhibited a stronger alignment with the Langmuir isotherm model for CR at 308 K and MEB at 288, 298, 308 K. The Freundlich isotherm model yielded a suitable fit for the adsorption of CR at 288 and 298 K. Thermodynamic analyses indicated that the removal of CR and MEB was spontaneous and endothermic. The adsorption mechanisms involved electrostatic interactions, π-π interactions, and hydrogen bonds. Intriguingly, it could achieve bidirectional selective adsorption of anionic and cationic dyes in the designed pH values, due to pH-tunable surface charge. Additionally, it also exhibited favorable reusability and antibacterial activity. Therefore, the as-prepared PPEKC aerogel could be a promising biosorbent for dye wastewater treatment.

Improving Tannery Wastewater Treatments Using an Additional Microbial Treatment with a Bacterial-Fungal Consortium

Environmental pollutants such as toxic heavy metals and oxygen-demanding solids are generated by leather manufacturing. In most tanneries, wastewaters are treated with physico-chemical methods but overly high levels of pollutants remain in surface waters. The efficiency of tanning wastewater treatment with conventional techniques was evaluated in four tanneries in Saudi Arabia. It was observed that the wastewaters contained high amounts of pollutants, needing further treatment. We isolated microorganisms from the wastewaters and carried out experiments to treat the effluents with different bacteria, fungi, and their consortia. We hypothesized that a consortium of microorganisms is more efficient than the single microorganisms in the consortium. The efficiency of five single bacterial and five fungal species from different genera was tested. In a consortium experiment, the efficiency of nine bacterial-fungal consortia was studied. The bacterium Corynebacterium glutamicum and the fungus Acremonium sp. were the most efficient in the single-microbe treatment. In the consortium treatment, the consortium of these two was the most efficient at treating the effluent. The factory wastewater treatment reduced total dissolved solids (TDS) from 1885 mg/L to 880 mg/L. C. glutamicum treatment reduced TDS to 150 mg/L and Acremonium sp. to 140 mg/L. The consortium of these two reduced TDS further to 80 mg/L. Moreover, the factory treatment reduced BOD from 943 mg/L to 440 mg/L, C. glutamicum to 75 mg/L, and Acremonium sp. 70 mg/L. The consortium reduced BOD further to 20 mg/L. The total heavy-metal concentration (Cd, Cr, Cu, Mn, and Pb) was reduced by the factory treatment from 43 μg/L to 26 μg/L and by the consortium to 0.2 μg/L. The collagen concentration that was studied using hydroxyproline assay decreased from 120 mg/L to 39 mg/L. It was shown that the consortium of the bacterium C. glutamicum and the fungus Acremonium sp. was more efficient in reducing the pollutants than the single species. The consortium reduced almost all parameters to below the environmental regulation limit for wastewater discharge to the environment in Saudi Arabia. The consortium should be studied further as an additional treatment to the existing conventional tannery wastewater treatments.

Fe-pillared montmorillonite functionalized chitosan/gelatin foams for efficient removal of organic pollutants by integration of adsorption and Fenton degradation

A Fe-pillared montmorillonite (Fe-MMT) functionalized bio-based foam (Fe-MMT@CS/G) was developed by using chitosan (CS) and gelatin (G) as the matrix for high-efficiency elimination of organic pollutants through the integration of adsorption and Fenton degradation. The results showed that the mechanical properties of as-obtained foam were strengthened by the addition of certain amounts of Fe-MMT. Interestingly, Fe-MMT@CS/G displayed efficient adsorption ability for charged pollutants under a wide range of pH. The adsorption processes of methyl blue (MB), methylene blue (MEB) and tetracycline hydrochloride (TCH) on Fe-MMT@CS/G were well described by the Freundlich isotherm model and pseudo-second-order kinetic model. The maximum adsorption capacities were 2208.24 mg/g for MB, 1167.52 mg/g for MEB, and 806.31 mg/g for TCH. Electrostatic interactions, hydrogen bonding and van der Waals forces probably involved the adsorption process. As expected, this foam could exhibit better removal properties toward both charged and uncharged organic pollutants through the addition of H2O2 to trigger the Fenton degradation reaction. For non-adsorbable and uncharged bisphenol A (BPA), the removal efficiency was dramatically increased from 1.20 % to 92.77 % after Fenton degradation. Additionally, it presented outstanding recyclability. These results suggest that Fe-MMT@CS/G foam is a sustainable and efficient green material for the alleviation of water pollution.

Self-cleaning cellulose acetate/crystalline nanocellulose/polyvinylidene fluoride/Mg0.975Ni0.025SiO3membrane for removal of diclofenac sodium and methylene blue dye in water

Recalcitrant pollutants present in wastewater, without an effective treatment, have several effects on aquatic ecosystems and human health due to their chemical structure and persistence. Therefore, it is crucial the development of efficient technologies to eliminate such pollutants in water. Nano-photocatalysts are considered a promising technology for water remediation; however, one common drawback is the difficulty of recovering it after water processing. One effective strategy to overcome such problem is its immobilization into substrates such as polymeric membranes. In this study, a polymeric membrane with embedded Mg0.975Ni0.025SiO3is proposed to remove model pollutants diclofenac sodium and methylene blue dye by synergetic adsorption and photocatalytic processes. Mg0.975Ni0.025SiO3was synthesized by the combustion method. The matrix polymeric blend consisting of a blend of cellulose acetate, crystalline nanocellulose and polyvinylidene fluoride was obtained by the phase inversion method. The composite membranes were characterized by FTIR, x-ray diffraction, and scanning electron microscopy. With pollutant solutions at pH 7, the pollutant adsorption capacity of the membranes reached up to 30% and 45% removal efficiencies for diclofenac sodium and methylene blue, respectively. Under simulated solar irradiation photocatalytic removal performances of 70% for diclofenac sodium pH 7, and of 97% for methylene blue dye at pH 13, were reached. The membrane photocatalytic activity allows the membrane to avoid pollutant accumulation on its surface, given a self-cleaning property that allows the reuse of at least three cycles under sunlight simulator irradiation. These results suggest the high potential of photocatalytic membranes using suitable and economical materials such as cellulosic compounds and magnesium silicates for water remediation.

Preparation of novel clay/chitosan/ZnO bio-composite as an efficient adsorbent for tannery wastewater treatment

This study focuses on the preparation of an activated clay/chitosan/ZnO bio-composite using solvent casting method. Clay was activated through microwave radiation using 1 M H2SO4 at a minimum liquid to solid ratio (L/S). Chitosan was extracted from waste prawn shell and ZnO nanoparticles (ZnO-NPs) were synthesized from zinc acetate di-hydrate (Zn (CH3CO2)2·2H2O) using the sol-gel method. The produced bio-composite were characterized using FT-IR, TGA, XRD and SEM. Response surface methodology (RSM) was used for experimental design to find out the optimum conditions, e.g., pH of the solution, dosage of adsorbent and contact time for the removal of methylene blue (MB) and Cr (VI) using MINITAB 18.1 software. The optimum conditions obtained for the highest removal of MB were pH 9.57, dosage 55.44 mg and contact time 114.09 min. Similarly, for the highest removal of Cr (VI) the optimum conditions were pH 3.75, dosage 67.42 mg and contact time 111.27 min. Applying these optimum conditions, the highest removal efficiency for MB and Cr (VI) was obtained at 84.21 % and 82.67 % with 9.57 mg g-1 and 10.45 mg g-1 of adsorption capacity respectively. The adsorption data were studied for both Langmuir and Freundlich isotherm. The value of maximum Langmuir sorption was (qm) 17.346 mg g-1 and 17.621 mg g-1 for MB and Cr (VI) respectively.

Reevaluation for UV photolysis of Fe(III) inducing tetracycline abatement: Overlooked significance of complexation-assistance in environmental fates of antibiotics

Interaction of antibiotics with metal ions in aquatic environments, commonly occurring to form complexes, may affect the migration, transformation and reactivity of residual antibiotics. This study demonstrates the photolysis of Fe(III) by UV irradiation at pH 3.5, as an advanced oxidation process, to produce •OH for the abatement of a common broad-spectrum antibiotic compound, tetracycline (TET). The dimethylamino (-N(CH₃)₂) and hydroxyl (-OH) groups of TET were determined as the binding sites for the complexation with Fe(III) via a series of novel characterization approaches. The complexation stoichiometry of Fe(III)-TET complexation, including the complexation ratio, constants and percentages, was determined via a complexometric titration based on the UV differential spectroscopy. The complexation constant was determined to be 21,240 ± 1745 L·mol^-1 under the designed conditions. Complexation of TET with Fe(III) enhanced its degradation in the UV/Fe(III) process, through the promotion of the •OH generation by inhibiting hydrolysis-precipitation process of Fe(III) and enhancing Fe(III)/Fe(II) cycle and the acceleration of mass transfer between •OH and TET. This finding provides new insights into the role of complexation in the fate of residual antibiotics in the UV/Fe(III) process. The reduced overall ecotoxicity during the TET abatement, evaluated by the toxicity variation through ECOSAR program, provides the UV/Fe(III) process with a theoretical feasibility for water decontamination in actual applications.

Insights into the carbon nanotubes-mediated activation of permanganate for decontamination under high salinity

Radical-based advanced oxidation process (AOPs) has attracted great interests in wastewater treatment field. However, by the traditional radical-based method, the degradation of organic pollution is greatly suppressed when radicals react with the co-existing anions in the solution. Herein, an efficient method for degrading of contaminant under high salinity conditions is discussed through a non-radical pathway. Carbon nanotubes (CNTs) was employed as an electron transfer medium to facilitate the electron conversion from contaminants to potassium permanganate (PM). Based the results of quenching experiments, probe experiments, and galvanic oxidation process experiments, the degradation mechanism of CNTs/PM process was demonstrated to be electron transfer, rather than reactive intermediate Mn species. As a result, typical influencing factors including salt concentration, cations, and humic acid have less of an impact on degradation during CNTs/PM processes. In addition, the CNTs/PM system exhibits superior reusability and universality of pollutants, which has the potential to be applied as a non-radical pathway for the purification of contaminant in the large-scale high salinity wastewater treatment.

Efficient activation of ferrate by Ru(III): Insights into the major reactive species and the multiple roles of Ru(III)

Ferrate (Fe(VI)) has aroused great research interest in recent years due to its environmental benignancy and lower potential in disinfection by-product generation. However, the inevitable self-decomposition and lower reactivity under alkaline conditions severely restrict the utilization and decontamination efficiency of Fe(VI). Here, we discovered that Ru(III), a representative transition metal, could effectively activate Fe(VI) to degrade organic micropollutants, and its performance on Fe(VI) activation exceeded that of previously reported metal activators. The high-valent metal species (i.e., Fe(IV)/Fe(V) and high-valent Ru species) made a major contribution to SMX removal by Fe(VI)-Ru(III). Density functional theory calculations indicated the function of Ru(III) as a two-electron reductant, leading to the production of Ru(V) and Fe(IV) as the predominant active species. The characterization analyses proved that Ru species was deposited on ferric (hydr)oxides as Ru(III), indicating the possibility of Ru(III) as an electron shuttle with the rapid valence circulation between Ru(V) and Ru(III). This study not only develops an efficient way to activate Fe(VI) but also offers a thorough understanding of Fe(VI) activation induced by transition metals.

Microalgae: A green eco-friendly agents for bioremediation of tannery wastewater with simultaneous production of value-added products

Tannery wastewater (TWW) has high BOD, COD, TS and variety of pollutants like chromium, formaldehydes, biocides, oils, chlorophenols, detergents and phthalates etc. Besides these pollutants, TWW also rich source of nutrients like nitrogen, phosphorus, carbon and sulphur etc. that can be utilized by microalgae during their growth. Direct disposal of TWW into the environment may lead severe environmental and health threats, therefore it needs to be treated adequately. Microalgae are considered as an efficient microorganisms (fast growing, adaptability and strain robustness, high surface to volume ratio, energy saving) for remediation of wastewaters with simultaneous biomass recovery and generation of value added products (VAPs) such as biofuels, biohydrogen, biopolymer, biofertilizer, pigments, bioethanol, bioactive compounds, nutraceutical etc. Most microalgae are photosynthetic and use CO₂ and light energy to synthesise carbohydrate and reduces the emission of greenhouse gasses. Microalgae are also reported to remove heavy metals and antibiotics from wastewaters by bioaccumulation, biodegradation and biosorption. Microalgal treatment can be an alternative of conventional processes with generation of VAPs. The use of biotechnology in wastewater remediation with simultaneous generation of VAPs is trending. The validation of economic viability and environmental sustainability, life cycle assessment studies and techno-economic analysis is undergoing. Thus, in this review, the characteristics of TWW and microalgae are summarized, which manifest microalgae as potential candidates for wastewater remediation with simultaneous production of VAPs. Further, the treatment mechanisms, various factors (physical, chemical, mechanical and biological etc.) affecting treatment efficiency as well as challenges associated with microalgal remediation are also discussed.

Enhancing zerovalent iron-based Fenton-like chemistry by copper sulfide: Insight into the active sites for sustainable Fe(II) supply

Zerovalent iron (ZVI)-based Fenton-like processes have been widely applied in degrading organic contaminants. However, the surface oxyhydroxide passivation layer produced during the preparation and oxidation of ZVI hinders its dissolution and Fe(III)/Fe(II) cycling, and restricts the generation of reactive oxygen species (ROS). In this study, copper sulfide (CuS) was found to effectively enhance the degradation of diverse organic pollutants in the ZVI/H₂O₂ system. Moreover, the degradation performance for the actual industrial wastewater (i.e., dinitrodiazophenol wastewater) in the ZVI/H₂O₂ system was impressively improved by 41% with CuS addition, and the COD removal efficiency could reach 97% after 2 h of treatment. Mechanism investigation revealed that the introduction of CuS accelerated the sustainable supply of Fe(II) in the ZVI/H₂O₂ system. Specifically, Cu(I) and reductive sulfur species (i.e., S^2-, S₂^2-, S_n^2- and H₂S (aq)) from CuS directly induced efficient Fe(III)/Fe(II) cycling. The iron-copper synergistic effect between Cu(II) from CuS and ZVI expedited Fe(II) generation from ZVI dissolution and Fe(III) reduction by formed Cu(I). This study not only elucidates the promotion effects of CuS on ZVI dissolution and Fe(III)/Fe(II) cycling in ZVI-based Fenton-like processes, but also provides a sustainable and high-efficiency iron-based oxidation system for removal of organic contaminants.

Zero waste discharge in tannery industries - An achievable reality? A recent review

In the recent times, more attention is on industrial waste management due to the unaffordable space for dump yards and landfills and the increased charges for waste dumping. Even though the vegan revolution and plant-based meat products are booming, the traditional slaughterhouses and the wastes produced by them continue to be a concern. Waste valorisation is an established procedure striving to create a closed chain process in industries where there is no refuse. Although a highly polluting industry, slaughterhouse industry wastes have been recycled to economically viable leather since ancient times. However, the tannery industry is causing pollution in par with or even more than the slaughterhouses. Effective management of the liquid and solid wastes from the tannery is of utmost concern because of its toxicity. The hazardous wastes generated enter the food chain, causing long term impacts in the ecosystem. Several leather waste transformation processes are widely used in the industries, and they are yielding good products of economic value. However careful exploration into the processes and products of waste valorisation are often ignored as long as the transformed waste product is of higher value than the waste. The most efficient and environmentally friendly waste management technique should convert the refuse into a value-added utilization without any toxic leftovers. Zero waste concept is an extension of the zero liquid discharge concept, where the solid waste is also treated and reused to such an extent that there is no residue to be sent to the landfill. This review initially presents the existing methods for the de-toxification of tannery wastes and examines the possibility of solid waste management within the tannery industry to attain zero waste discharge.

Management of tannery waste effluents towards the reclamation of clean water using an integrated membrane system: A state-of-the-art review

Tanning and other leather processing methods utilize a large amount of freshwater, dyes, chemicals, and salts and produce toxic waste, raising questions regarding their environmental sensitivity and eco-friendly nature. Total suspended solids, total dissolved solids, chemical oxygen demand, and ions such as chromium, sulfate, and chloride turn tannery wastewater exceedingly toxic for any living species. Therefore, it is imperative to treat tannery effluent, and existing plants must be examined and upgraded to keep up with recent technological developments. Different conventional techniques to treat tannery wastewater have been reported based on their pollutant removal efficiencies, advantages, and disadvantages. Research on photo-assisted catalyst-enhanced deterioration has inferred that both homogeneous and heterogeneous catalysis can be established as green initiatives, the latter being more efficient at degrading organic pollutants. However, the scientific community experiences significant problems developing a feasible treatment technique owing to the long degradation times and low removal efficiency. Hence, there is a chance for an improved solution to the problem of treating tannery wastewater through the development of a hybrid technology that uses flocculation as the primary treatment, a unique integrated photo-catalyst in a precision-designed reactor as the secondary method, and finally, membrane-based tertiary treatment to recover the spent catalyst and reclaimable water. This review gives an understanding of the progressive advancement of a cutting-edge membrane-based system for the management of tanning industrial waste effluents towards the reclamation of clean water. Adaptable routes toward sludge disposal and the reviews on techno-economic assessments have been shown in detail, strengthening the scale-up confidence for implementing such innovative hybrid systems.

A novel synergistic covalence and complexation bridging strategy based on multi-functional biomass-derived aldehydes and Al(III) for engineering high-quality eco-leather

To get rid of the chrome pollution faced by the leather industry, we explored a novel engineering high-quality eco-leather technology based on the synergistic interactions between biomass-based aldehydes and Al(III). Firstly, dialdehyde xanthan gum (DXG) was prepared to covalently crosslink with the collagen fibers (CFs) via Schiff-base linkages under alkaline conditions, endowing the leather with a shrinkage temperature (Ts) of 80 °C and opening channels for the subsequent penetration of Al species (AL). Secondly, and for this latter purpose, the DXG-tanned leather was acidified to release part of the DXG from the leather according to the dynamic nature of the Schiff-base. Containing suitable oxygen-containing groups (OGs) with excellent complexation capabilities, the released DXG served as masking agents for AL, facilitating the penetration of AL into the inner CFs network for further complexation crosslinking. Consequently, a denser crosslinking network was constructed in the leather, and the crust leather exhibited higher Ts (82.2 °C), improved mechanical (tensile strength: 13.4 N/mm², tear strength: 53.3 N/mm) and organoleptic properties than those of the DXG crust or AL crust leathers. This demonstrates that this synergistic covalence and complexation bridging strategy is a sustainable option to substitute highly restricted chrome tanning agent for eco-leather production.

Chrome shaving-derived biochar as efficient persulfate activator: Ti-induced charge distribution modulation for 1O2 dominated nonradical process

Efficient degradation of organic contaminants by oxidative radicals remains a challenge due to invalid consumption of radicals and easy generation of secondary halogenated pollutants. In this work, an efficient and recyclable bimetallic biochar (Cr-Ti/BC) was developed through peroxydisulfate (PDS) activation via nonradical pathway for sulfamethoxazole (SMX) degradation. The Cr-Ti/BC exhibited excellent catalytic activity for 99.9 % of SMX removal with a high k_obs of 0.13 min^-1, and negligible inhibitory effects were observed under various pH condition. The activation mechanisms were (i) metastable reactive intermediates (Cr-Ti/BC-PDS) formation via an interaction between Cr-Ti/BC and PDS on the active defective sites (e.g., OH/COC, COOH, CO, nitric oxides, graphitic N, and pyridinic N), and (ii) ¹O₂ generation through electron transfer between Cr-Ti/BC-PDS intermediates and dissolved oxygen. The high reusability and strong stability of Cr-Ti/BC also verified the outstanding advantage of the Cr-Ti/BC during practical application. This study not only is the first study the catalytic performance of Cr and Ti co-doped biochar for PDS activation, but also successfully provides a promising strategy to induce a nonradical pathway for PDS activation, which is of great significance for the subsequent method design, and thus paving the path for exploiting advanced oxidation systems in practical application for organic contaminant removal toward polluted site remediation.

Analysis of the Capacity of the Fenton Process for the Treatment of Polluted Wastewater from the Leather Dyeing Industry

In this work, the capacity of the Fenton oxidation process for the degradation of color and organic matter contained in the wastewater generated in the leather dyeing stage (WWDS) of an industrial tannery was evaluated. The wastewater characteristics included, among others, high toxicity (lethal concentration for Artemia salina, 24 h test, 50% of population = 93.71 ppm), high dye concentration (36 mg/L, yellow color), high chromium concentration (3.34 mg/L), and low biodegradability index (BOD₅/COD ratio = 0.083). From an experimental design, the response surface methodology, and the multiobjective optimization analysis, the following optimal operating conditions were established: initial pH = 3.15, [Fe²⁺] = 0.981 mM, and [H₂O₂] = 5.38 mM. After 10 min of oxidation (determined from kinetic studies), it reached approximately 97% decolorization, COD reduction of approximately 82%, and TOC mineralization of approximately 92%. A synergistic effect of Fenton's reagents for TOC removal (S _TOC = 0.8) and decolorization (S _CN = 0.28) of the WWDS under study was confirmed experimentally. An increase in the biodegradability index, to a value of approximately 0.3, was confirmed. The cost of the treatment was estimated at 0.0112 USD/m³. Thus, the Fenton oxidation process allowed compliance with current Colombian environmental regulations and considerably improved the biodegradability and toxicity characteristics of the studied industrial effluent. It can be considered as an efficient alternative, easy to carry out on an industrial batch scale, and economically viable for the treatment of wastewater from the leather dyeing stage of an industrial tannery.

Application of an Integrated System of Thermal Pressure Hydrolysis/Membrane Techniques to Recover Chromium from Tannery Waste for Reuse in Hide Tanning Processes

This paper presents the results of research on a new method of chromium recovery from solid waste generated during the tanning of raw hides. In the first stage, the shredded mixture of useless leather scraps is decomposed through thermal pressure hydrolysis (TPH) in nitric acid in appropriate process conditions. Then, the liquid product of this process (hydrolysate) is fractionated using membrane separation techniques. The microfiltration (MF) process enables the initial purification of the hydrolysate by concentrating the organic matter. On the other hand, the nanofiltration (NF) process enables a three-fold concentration of total chromium in the pre-purified hydrolysate. The total chromium concentrate prepared in the above manner was successfully used in the model tanning processes. These processes were carried out on pickled bovine hides, using a mixture of a commercial chromium tanning agent and chromium concentrate after nanofiltration. The reference sample was bovine hide traditionally tanned with a commercial chromium tanning agent. Based on the results of the physical and chemical analyses, it was found that the properties of hides tanned using chromium recovered from waste are similar to those of hides tanned traditionally using a commercially available chromium tanning agent. The industrial implementation of the developed tannery waste valorisation technology would enable transition from a linear economy to circular economy.

Quantitative Analysis of the Research Development Status and Trends of Tannery Wastewater Treatment Technology

In order to better grasp the development and trends of tannery wastewater (TWW) treatment research, this paper provides a review of the TWW treatment research dynamics based on the Web of Science (WoS) database and using CiteSpace software. The research dynamics, hot topics, evolutionary history and research trends in this field are revealed. The results showed that research related to TWW treatment has shown a high growth trend in the number of articles in recent years, and India was outstanding in terms of influence in this area. The keyword clustering analysis showed that the main research hotspots in the field of TWW treatment were biological treatment processes (phytoremediation, constructed wetlands, anaerobic treatment and biofilm reactors) and chemical treatment processes (coagulation and flocculation, and advanced oxidation processes). The analysis of new research frontiers showed that the bioremediation and the application of biofuel cells in TWW will become important research directions in the future.