Emerging functional materials based on chemically designed molecular recognition

Molecular recognition characteristics of co-assembled peptides on atomically flat graphite surfaces

Molecular recognition, involving the binding of two or more molecules, is widely found in multiple disciplines. It plays a crucial role in driving specific molecular functionalization or biological activities such as antigen-antibody interactions. Recently, the molecular recognition of single peptides self-assembly at interfaces has been widely investigated since their broad applications in biosensors and bioelectronics. However, the recognition characteristics of peptide-peptide co-assembly on solids have not been investigated yet, which provides a basis for potential multi-probes biosensing or structure-intermingled functionalized bioelectronic applications. Here, we explored the molecular recognition characteristics of co-assembled peptides on two-dimensional (2D) layered nanomaterials, specifically graphite. Our findings showed distinct surface characteristics of peptide co-assembly in comparison to the independent peptide self-assembly. Peptide co-assembly exhibited the nucleation and growth heterogeneities with reduced nucleation and growth rates, dominated by a diffusion-limited step as confirmed via carrying out the sequential assembly experiments. Moreover, molecular dynamics simulation reveals a slowdown binding process of co-assembled peptides to graphite. Furthermore, the misattachment of one peptide to arrays of another type of peptide with distinct structural ordering orientations severely postponed peptide elongation. Therefore, our work provides valuable insight into the fundamental surface characteristics of two co-assembled peptides as they specifically recognize graphite surface via undergoing continuous surface behaviors from binding to diffusion until final ordering process. The formation of co-assembled peptide patterns on 2D layered nanomaterials incorporates multiple functions, enabling to provide potential applications in intermingled peptide-based biosensing or bioelectronic nanodevices.

Special Issue: "Rational Design and Synthesis of Bioactive Molecules"

The rational design of novel bioactive molecules is a critical but challenging task in drug discovery [...].

Intracellular morphogenesis of diatom silica is guided by local variations in membrane curvature

Silica cell-wall formation in diatoms is a showcase for the ability of organisms to control inorganic mineralization. The process of silicification by these unicellular algae is tightly regulated within a membrane-bound organelle, the silica deposition vesicle (SDV). Two opposing scenarios were proposed to explain the tight regulation of this intracellular process: a template-mediated process that relies on preformed scaffolds, or a template-independent self-assembly process. The present work points to a third scenario, where the SDV membrane is a dynamic mold that shapes the forming silica. We use in-cell cryo-electron tomography to visualize the silicification process in situ, in its native-state, and with a nanometer-scale resolution. This reveals that the plasma membrane interacts with the SDV membrane via physical tethering at membrane contact sites, where the curvature of the tethered side of the SDV membrane mirrors the intricate silica topography. We propose that silica growth and morphogenesis result from the biophysical properties of the SDV and plasma membranes.

Antitoxin nanoparticles: design considerations, functional mechanisms, and applications in toxin neutralization

The application of nanotechnology has significantly advanced the development of novel platforms that enhance disease treatment and diagnosis. A key innovation in this field is the creation of antitoxin nanoparticles (ATNs), designed to address toxin exposure. These precision-engineered nanosystems have unique physicochemical properties and selective binding capabilities, allowing them to effectively capture and neutralize toxins from various biological, chemical, and environmental sources. In this review, we thoroughly examine their therapeutic and diagnostic potential for managing toxin-related challenges. We also explore recent advancements and offer critical insights into the design and clinical implementation of ATNs.

Highly Cytocompatible Polylactic Acid Based Electrospun Microfibers Loaded with Silver Nanoparticles Generated onto Chestnut Shell Lignin for Targeted Antibacterial Activity and Antioxidant Action

Electrospun (e-spun) fibers are generally regarded as powerful tools for cell growth in tissue regeneration applications, and the possibility of imparting functional properties to these materials represents an increasingly pursued goal. We report herein the preparation of hybrid materials in which an e-spun d,l-polylactic acid matrix, to which chitosan or crystalline nanocellulose was added to improve hydrophilicity, was loaded with different amounts of silver(0) nanoparticles (AgNP) generated onto chestnut shell lignin (CSL) (AgNP@CSL). A solvent-free mechanochemical method was used for efficient (85% of the theoretical value by XRD analysis) Ag(0) production from the reduction of AgNO3 by lignin. For comparison, e-spun fibers containing CSL alone were also prepared. SEM and TEM analyses confirmed the presence of AgNP@CSL (average size 30 nm) on the fibers. Different chemical assays indicated that the AgNP@CSL containing fibers exhibited marked antioxidant properties (EC50 1.6 ± 0.1 mg/mL, DPPH assay), although they were halved with respect to those of the CSL containing fibers, as expected because of the efficient silver ion reduction. All the fibers showed high cytocompatibility toward human mesenchymal stem cells (hMSCs) representative of the self-healing process, and their antibacterial properties were tested against the pathogens Escherichia coli (E. coli), Staphylococcus epidermidis, and Pseudomonas aeruginosa. Finally, competitive surface colonization as simulated by cocultures of hMSC and E. coli showed that AgNP@CSL loaded fibers offered the cells a targeted protection from infection, thus well balancing cytocompatibility and antibacterial properties.

Regulation of cell fate by cell imprinting approach in vitro

Cell culture-based technologies are widely utilized in various domains such as drug evaluation, toxicity assessment, vaccine and biopharmaceutical development, reproductive technology, and regenerative medicine. It has been demonstrated that pre-adsorption of extracellular matrix (ECM) proteins including collagen, laminin and fibronectin provide more degrees of support for cell adhesion. The purpose of cell imprinting is to imitate the natural topography of cell membranes by gels or polymers to create a reliable environment for the regulation of cell function. The results of recent studies show that cell imprinting is a tool to guide the behavior of cultured cells by controlling their adhesive interactions with surfaces. Therefore, in this review we aim to compare different cell cultures with the imprinting method and discuss different cell imprinting applications in regenerative medicine, personalized medicine, disease modeling, and cell therapy.

Genomic signatures suggesting adaptation to ocean acidification in a coral holobiont from volcanic CO2 seeps

Ocean acidification, caused by anthropogenic CO₂ emissions, is predicted to have major consequences for reef-building corals, jeopardizing the scaffolding of the most biodiverse marine habitats. However, whether corals can adapt to ocean acidification and how remains unclear. We addressed these questions by re-examining transcriptome and genome data of Acropora millepora coral holobionts from volcanic CO₂ seeps with end-of-century pH levels. We show that adaptation to ocean acidification is a wholistic process involving the three main compartments of the coral holobiont. We identified 441 coral host candidate adaptive genes involved in calcification, response to acidification, and symbiosis; population genetic differentiation in dinoflagellate photosymbionts; and consistent transcriptional microbiome activity despite microbial community shifts. Coral holobionts from natural analogues to future ocean conditions harbor beneficial genetic variants with far-reaching rapid adaptation potential. In the face of climate change, these populations require immediate conservation strategies as they could become key to coral reef survival.

Molecular Complementarity of Proteomimetic Materials for Target-Specific Recognition and Recognition-Mediated Complex Functions

As biomolecules essential for sustaining life, proteins are generated from long chains of 20 different α-amino acids that are folded into unique 3D structures. In particular, many proteins have molecular recognition functions owing to their binding pockets, which have complementary shapes, charges, and polarities for specific targets, making these biopolymers unique and highly valuable for biomedical and biocatalytic applications. Based on the understanding of protein structures and microenvironments, molecular complementarity can be exhibited by synthesizable and modifiable materials. This has prompted researchers to explore the proteomimetic potentials of a diverse range of materials, including biologically available peptides and oligonucleotides, synthetic supramolecules, inorganic molecules, and related coordination networks. To fully resemble a protein, proteomimetic materials perform the molecular recognition to mediate complex molecular functions, such as allosteric regulation, signal transduction, enzymatic reactions, and stimuli-responsive motions; this can also expand the landscape of their potential bio-applications. This review focuses on the recognitive aspects of proteomimetic designs derived for individual materials and their conformations. Recent progress provides insights to help guide the development of advanced protein mimicry with material heterogeneity, design modularity, and tailored functionality. The perspectives and challenges of current proteomimetic designs and tools are also discussed in relation to future applications.

Abiotic Synthetic Antibody Inhibitor with Broad-Spectrum Neutralization and Antiviral Efficacy against Escaping SARS-CoV-2 Variants

The rapid emergence and spread of vaccine/antibody-escaping variants of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has posed serious challenges to our efforts in combating corona virus disease 2019 (COVID-19) pandemic. A potent and broad-spectrum neutralizing reagent against these escaping mutants is extremely important for the development of strategies for the prevention and treatment of SARS-CoV-2 infection. We herein report an abiotic synthetic antibody inhibitor as a potential anti-SARS-CoV-2 therapeutic agent. The inhibitor, Aphe-NP14, was selected from a synthetic hydrogel polymer nanoparticle library created by incorporating monomers with functionalities complementary to key residues of the SARS-CoV-2 spike glycoprotein receptor binding domain (RBD) involved in human angiotensin-converting enzyme 2 (ACE2) binding. It has high capacity, fast adsorption kinetics, strong affinity, and broad specificity in biologically relevant conditions to both the wild type and the current variants of concern, including Beta, Delta, and Omicron spike RBD. The Aphe-NP14 uptake of spike RBD results in strong blockage of spike RBD-ACE2 interaction and thus potent neutralization efficacy against these escaping spike protein variant pseudotyped viruses. It also inhibits live SARS-CoV-2 virus recognition, entry, replication, and infection in vitro and in vivo. The Aphe-NP14 intranasal administration is found to be safe due to its low in vitro and in vivo toxicity. These results establish a potential application of abiotic synthetic antibody inhibitors in the prevention and treatment of the infection of emerging or possibly future SARS-CoV-2 variants.

Exocytosis of the silicified cell wall of diatoms involves extensive membrane disintegration

Diatoms are unicellular algae characterized by silica cell walls. These silica elements are known to be formed intracellularly in membrane-bound silica deposition vesicles and exocytosed after completion. How diatoms maintain membrane homeostasis during the exocytosis of these large and rigid silica elements remains unknown. Here we study the membrane dynamics during cell wall formation and exocytosis in two model diatom species, using live-cell confocal microscopy, transmission electron microscopy and cryo-electron tomography. Our results show that during its formation, the mineral phase is in tight association with the silica deposition vesicle membranes, which form a precise mold of the delicate geometrical patterns. We find that during exocytosis, the distal silica deposition vesicle membrane and the plasma membrane gradually detach from the mineral and disintegrate in the extracellular space, without any noticeable endocytic retrieval or extracellular repurposing. We demonstrate that within the cell, the proximal silica deposition vesicle membrane becomes the new barrier between the cell and its environment, and assumes the role of a new plasma membrane. These results provide direct structural observations of diatom silica exocytosis, and point to an extraordinary mechanism in which membrane homeostasis is maintained by discarding, rather than recycling, significant membrane patches.

Reversible Self-Assembled Monolayers with Tunable Surface Dynamics for Controlling Cell Adhesion Behavior

Cells adhering onto surfaces sense and respond to chemical and physical surface features. The control over cell adhesion behavior influences cell migration, proliferation, and differentiation, which are important considerations in biomaterial design for cell culture, tissue engineering, and regenerative medicine. Here, we report on a supramolecular-based approach to prepare reversible self-assembled monolayers (rSAMs) with tunable lateral mobility and dynamic control over surface composition to regulate cell adhesion behavior. These layers were prepared by incubating oxoacid-terminated thiol SAMs on gold in a pH 8 HEPES buffer solution containing different mole fractions of ω-(ethylene glycol)2-4- and ω-(GRGDS)-, α-benzamidino bolaamphiphiles. Cell shape and morphology were influenced by the strength of the interactions between the amidine-functionalized amphiphiles and the oxoacid of the underlying SAMs. Dynamic control over surface composition, achieved by the addition of inert filler amphiphiles to the RGD-functionalized rSAMs, reversed the cell adhesion process. In summary, rSAMs featuring mobile bioactive ligands offer unique capabilities to influence and control cell adhesion behavior, suggesting a broad use in biomaterial design, tissue engineering, and regenerative medicine.

Recapitulating dynamic ECM ligand presentation at biomaterial interfaces: Molecular strategies and biomedical prospects

The extracellular matrix (ECM) provides not only physical support for the tissue structural integrity, but also dynamic biochemical cues capable of regulating diverse cell behaviors and functions. Biomaterial surfaces with dynamic ligand presentation are capable of mimicking the dynamic biochemical cues of ECM, showing ECM-like functions to modulate cell behaviors. This review paper described an overview of present dynamic biomaterial interfaces by focusing on currently developed molecular strategies for dynamic ligand presentation. The paradigmatic examples for each strategy were separately discussed. In addition, the regulation of some typical cell behaviors on these dynamic biointerfaces including cell adhesion, macrophage polarization, and stem cell differentiation, and their potential applications in pathogenic cell isolation, single cell analysis, and tissue engineering are highlighted. We hope it would not only clarify a clear background of this field, but also inspire to exploit novel molecular strategies and more applications to match the increasing demand of manipulating complex cellular processes in biomedicine.

Molecularly imprinted polymer as a synthetic antibody for the biorecognition of hazelnut Cor a 14-allergen

Artificial receptors that mimic their natural biological counterparts have several advantages, such as lower production costs and increased shelf-life stability/versatility, while overcoming the ethical issues related to raising antibodies in animals. In this work, the proposed tailor-made molecularly imprinted polymer (MIP)-allergen receptors aimed at substituting or even transcending the performance of biological antibodies. For this purpose, a MIP was proposed as an artificial antibody for the recognition of hazelnut Cor a 14-allergen. The target protein was grafted onto the conducting polypyrrole receptor film using gold screen-printed electrodes (Au-SPE). The electrochemical assessment presented a linear response for the dynamic range of 100 fg mL^-1-1 μg mL^-1 and a LOD of 24.5 fg mL^-1, as determined by square wave voltammetry from the calibration curves prepared with standards diluted in phosphate buffer. Surface plasmon resonance (SPR) was used as a secondary transducer to evaluate the performance of the Cor a 14-MIP sensor, enabling a linear dynamic range of 100 fg mL^-1- 0.1 μg mL^-1 and a LOD of 18.1 fg mL^-1. The selectivity of the tailored-made Cor a 14-MIP was tested against potentially cross-reactive plant/animal species based on the rebinding affinity (Freundlich isotherm-K_F) of homologues/similar proteins, being further compared with custom-made polyclonal anti-Cor a 14 IgG immunosensor. Results evidenced that the MIP mimics the biorecognition of biological antibodies, presenting higher selectivity (only minor cross-reactivity towards walnut and Brazil nut 2S albumins) than the Cor a 14/anti-Cor a 14 IgG immunosensor. The application of electrochemical Cor a 14-MIP sensor to model mixtures of hazelnut in pasta enabled quantifying hazelnut down to 1 mg kg^-1 (corresponding to 0.16 mg kg^-1 of hazelnut protein in the matrix). To the best of our knowledge, Cor a 14-MIP is the first sensor based on an artificial/synthetic biorecognition platform for the specific detection of hazelnut allergens, while presenting high-performance parameters with demonstrated application in food safety management.

A linear-polymer-based lactoferrin-selective recognition element for an ELISA mimic: A proof of concept

The synthesis of polymers with tailored properties for the recognition of macromolecules such as proteins is challenging. In this work, the synthesis of a new polymer format, a linear polymer (LP), as the selective recognition element for the globular protein lactoferrin (LF) is proposed as a proof-of-concept study. For the synthesis, a solid-phase strategy using the reversible deactivation radical polymerisation (RDRP) mechanism is proposed. This approach, which is usually used in molecular imprinting, involves the immobilisation of LF on the surface of a solid support, but, unlike classical imprinting, a cross-linker in the polymerisation mixture is not required. Consequently, the copolymer is soluble and flexible, thus overcoming the drawbacks associated with traditional synthetic polymers for macromolecule imprinting. This new polymer format has great potential for replacing natural antibodies in bioassays such as enzyme-linked immunosorbent assays (ELISA), dot blot, western blot, or pull-down. In our case, the linear polymer was used as a recognition element to replace natural antibodies in a LF-selective ELISA. The responses of the linear polymer between LF concentrations of 0.1 nM and 0.25 μM were studied, and a significant difference was observed between the non-specific signals and the signals measured in the presence of the polymeric material. Further, the response versus log concentration curves were fitted to a logistic equation, allowing estimation of the EC₅₀ value: 11.8 ± 1.4 nM. We also confirmed the selective detection of LF using the competitive inhibition of the selective LF-biotin conjugate (LF-Bi) binding to the plastic receptor (LP) for closely related proteins (e.g. those having similar molecular weights or isoelectric points) such as human lysozyme, trypsin, and albumin, which are present in human body fluids. The system presents a cross-reactivity value or selectivity of 1.95% for lysozyme, 0.028% for trypsin, and 0.016% for albumin. The applicability of this method for the determination of urine LF levels in inflammatory and infectious diseases of the human urinary tract is also demonstrated.

A γ-cyclodextrin-based metal-organic framework (γ-CD-MOF): a review of recent advances for drug delivery application

The relatively new class of porous material known as metal-organic framework (MOF) exhibits unique features such as high specific surface area, controlled porosity and high chemical stability. Many green synthesis approaches for MOFs have been proposed using biocompatible metal ions and linkers to maximise their use in pharmaceutical fields. The involvement of biomolecules as an organic ligand can act promising because of their biocompatibility. Recently, cyclodextrin metal-organic frameworks (CD-MOFs) represent environmentally friendly and biocompatible characteristics that lead them to biomedical applications. They are regarded as a promising nanocarrier for drug delivery, due to their high specific surface area, high porosity, tuneable chemical structure, and easy fabrication. This review focuses on the unique properties of CD-MOF and the recent advances in methods for the synthesis of these porous structures with emphasis on particle size. Then, the state-of-the-art drug delivery systems with various drugs along with the performance of CD-MOFs as efficient drug delivery systems are presented. Particular emphasis is laid on researches investigating the drug delivery potential of γ-CD-MOF.

Rotating Cylinder-Assisted Nanoimprint Lithography for Enhanced Chemisorbable Filtration Complemented by Molecularly Imprinted Polymers

Rotating cylindrical stamp-based nanoimprint technique has many advantages, including the continuous fabrication of intriguing micro/nanostructures and rapid pattern transfer on a large scale. Despite these advantages, the previous nanoimprint lithography has rarely been used for producing sophisticated nanoscale patterns on a non-planar substrate that has many extended applications. Here, the simple integration of nanoimprinting process with a help of a transparent stamp wrapped on the cylindrical roll and UV optical source in the core to enable high-throughput pattern transfer, particularly on a fabric substrate is demonstrated. Moreover, as a functional resin material, this innovative strategy involves a synergistic approach on the synthesis of molecularly imprinted polymer, which are spatially organized free-standing perforated nanostructures such as nano/microscale lines, posts, and holes patterns on various woven or nonwoven blank substrates. The proposed materials can serve as a self-encoded filtration medium for selective separation of formaldehyde molecules. It is envisioned that the combinatorial fabrication process and attractive material paves the way for designing next-generation separation systems in use to capture industrial or household toxic substances.

Recent Advances in Nanomaterials Based Molecularly Imprinted Electrochemical Sensors

Nanotechnology and molecular imprinting both are omnipresent in the modern scientific world. Molecular recognition in the biological systems was mimicked to an extreme extent with its difficulties through molecular imprinting. Solving the problems related to this mimicking was the goal of science and technology. Some challenges like difficulties with the imprinting of protein, poor compatibility with aqueous environments, template leakage, and heterogeneous populations of binding sites in the polymers that contribute to a high level of nonspecific binding sites were addressed with recent advancement in the modern era. These issues were solved later with nano level instrumentations and inventions. Different types of nanomaterials were employed for this research on molecular recognition through MIPs to enhance selectivity, sensitivity and stability to specific systems such as sensors. This review paper attempts to give all the recent advances in molecular imprinting and the potential of nanomaterials in electrochemical sensors.

Establishing Halogen-Bond Preferences in Molecules with Multiple Acceptor Sites

The interplay between hydrogen bonds (HBs) and halogen bonds (XBs), has been addressed by co-crystallizing two halogen bond donors, 1,4-diiodotetrafluorbenzene(DITFB) and 1,3,5-trifluoro-2,4,6-triiodobenzene(TITFB) with four series of targets; N-(pyridin-2-yl)benzamide (Bz-X), N-(pyridin-2-yl)picolinamides (2Pyr-X), N-(pyridin-2-yl)nicotinamides (3Pyr-X), N-(pyridin-2-yl)isonicotinamides (4Pyr-X); X=H/Cl/Br/I. The structural outcomes were compared with interactions in the targets themselves. 13 co-crystals were analysed by single-crystal X-ray diffraction (SCXRD). In all three co-crystals from the 2Pyr series, the intramolecular HB remained intact while the XB donors engaged with the N(pyr) or O=C sites. In the ten co-crystals from the other three series, the intermolecular HBs present in the individual targets were disrupted in 9/10 cases. Overall, the acceptor sites selected by the halogen-bond donors in these targets were distributed as follows; N(pyr)=81 %, O=C (15 %) or π (4 %).

Recent Advances of Molecularly Imprinted Polymers Based on Cyclodextrin

Molecular imprinting polymers (MIPs), generally considered as artificial mimics that are comparable to natural receptor, are polymers with tailor-made specific recognition sites complementary to the template molecules in shape and size. As a class of supramolecular compounds, cyclodextrins (CDs) are flourishing in the field of molecular imprinting with their unique structural properties. This review presents recent advances in application of MIPs based on CDs during the past five years. The discussion is grouped according to the different role of CDs in MIPs, that is, functional monomer, carrier modifier, etc. Main focus is the application of CD-based MIP on sample preparation, detection, and sensing. Additionally, drug delivery with CD-based MIP is also briefly discussed. Finally, challenges and future prospects of application of CDs in MIP are elaborated.

Programmable immune activating electrospun fibers for skin regeneration

Immune cells play a crucial regulatory role in inflammatory phase and proliferative phase during skin healing. How to programmatically activate sequential immune responses is the key for scarless skin regeneration. In this study, an "Inner-Outer" IL-10-loaded electrospun fiber with cascade release behavior was constructed. During the inflammatory phase, the electrospun fiber released a lower concentration of IL-10 within the wound, inhibiting excessive recruitment of inflammatory cells and polarizing macrophages into anti-inflammatory phenotype "M2c" to suppress excessive inflammation response. During the proliferative phase, a higher concentration of IL-10 released by the fiber and the anti-fibrotic cytokines secreted by polarized "M2c" directly acted on dermal fibroblasts to simultaneously inhibit extracellular matrix overdeposition and promote fibroblast migration. The "Inner-Outer" IL-10-loaded electrospun fiber programmatically activated the sequential immune responses during wound healing and led to scarless skin regeneration, which is a promising immunomodulatory biomaterial with great potential for promoting complete tissue regeneration.

Imprinted Polymers as Synthetic Receptors in Sensors for Food Safety

Foodborne illnesses represent high costs worldwide in terms of medical care and productivity. To ensure safety along the food chain, technologies that help to monitor and improve food preservation have emerged in a multidisciplinary context. These technologies focus on the detection and/or removal of either biological (e.g., bacteria, virus, etc.) or chemical (e.g., drugs and pesticides) safety hazards. Imprinted polymers are synthetic receptors able of recognizing both chemical and biological contaminants. While numerous reviews have focused on the use of these robust materials in extraction and separation applications, little bibliography summarizes the research that has been performed on their coupling to sensing platforms for food safety. The aim of this work is therefore to fill this gap and highlight the multidisciplinary aspects involved in the application of imprinting technology in the whole value chain ranging from IP preparation to integrated sensor systems for the specific recognition and quantification of chemical and microbiological contaminants in food samples.

Biomimetic design of photonic materials for biomedical applications

Photonic crystal (PC) materials with bio-inspired structure colors have drawn increasing attention as their potentials have been rapidly progressed in the field of biomedicine. After elaborate integration with smart materials or preparations through advanced techniques, PC materials have shown significant advantages in biosensing, bio-probing, bio-screening, tissue engineering, and so forth. In this review, we first introduced the fundamentals of PC materials as well as their fabrication strategies with different dimensional outputs. Based on these diversified PC materials, their biomedical potentials as biosensing elements, cell carriers, drug delivery systems, screening methods, cell scaffolds for tissue engineering, cell imaging probes, as well as the monitoring means for biological processes were then highlighted. In addition to these, we finally listed and discussed some emerging applications of PCs integrated with functional materials and newly developed material engineering technologies. In short, this review will provide a panoramic view of PCs-based biomedicines, and moreover, the progressive discussions from fundamentals to advanced applications in this review may also encourage researchers to innovate PC materials or devices for broader biomedical applications.

Electrospun ultrafine fibers for advanced face masks

The outbreak of Coronavirus Disease 2019 (COVID-19), which is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has triggered great global public health concern. Face masks are essential tools to reduce the spread of SARS-CoV-2 from human to human. However, there are still challenges to prolong the serving life and maintain the filtering performance of the current commercial mask. Filters composed of ultrafine fibers with diameter down to tens of nanometers have the potential to physically block viruses. With adjustable composition and nanostructures, the electrospun ultrafine fiber filter is possible to achieve other necessary functions beyond virus blocking, such as antiviral, transparent, and degradable, making it an important part of fighting the epidemic. In this review, beginning with the basic information of the viruses, we summarize the knowledge of masks and respirators, including the filtering mechanism, structure, classification, and standards. We further present the fabrication method, filtering performance, and reusable potential of electrospun ultrafine fiber-based masks. In the end, we discuss the development directions of ultrafine fibers in protective devices, especially their new functional applications and possible contributions in the prevention and control of the epidemic.

Hepatic cell-sheet fabrication of differentiated mesenchymal stem cells using decellularized extracellular matrix and thermoresponsive polymer

PURPOSE

Liver tissue engineering via cell sheet technology would open new doors for treatment of patients with liver failure. Decellularized tissues could provide sufficient extracellular matrix (ECM) to support development of hepatocytes in in vivo niches. Besides, with the potential of temperature responsive polymer (pNIPAAm) as an intelligent surface for controlling the attachment/detachment of cell, we set out to generate three in vitro microenvironments models including I: pNIPAAm hydrogel (pN hydrogel), II: decellularized ECM incorporated into pNIPAAm hydrogel (dECM + pN hydrogel) and III: decellularized ECM scaffold (dECM scaffold) to investigate the structural and function cues of hepatocyte-like cells after differentiation of adipose tissue-derived mesenchymal stem cells (AT-MSCs) on the surface of these models.

METHOD

dECM scaffold was obtained after decellularization of rat liver, and its efficiency was analyzed. pN hydrogel and dECM + pN hydrogel (1:3 and 2:3 ratios) of were fabricated, and scaffold architecture was characterized. Each well of culturing plates was coated separately with these three constructs and AT-MSCs were instructed to differentiate into hepatocyte-like cells (HLCs). After recellularization, patterns of differentiation, and expression of hepatogenic markers were investigated via biochemical assays and qRT-PCR at different time points.

RESULTS

Multipotency of AT-MSCs, after their ability for osteogenesis and adipogenesis was documented. Production of dense and intact cell sheets was reported in dECM + pN hydrogel, as opposed to pN hydrogel and dECM scaffold. Also, statistically significant difference of HLCs functionality in dECM + pN hydrogel was confirmed after evaluation of the expression of hepatocyte markers including, alpha-fetoprotein, cytokeratin 18, cytochrome P450-2E1 and phosphoenolpyruvate carboxykinase.

CONCLUSION

Our results proved dECM + pN hydrogel were able to preserve hepatocyte function in cell sheets owing to the high level of albumin, urea, hepatogenic markers, and glycogenesis potential of HLCs. Accordingly, dECM incorporated in pN hydrogel could remodel microenvironments to guide the AT-MSCs into conducive differentiation and proliferation to give rise to multilayer sheets of cells in their own ECM.

3D-printed assistive pipetting system for gel electrophoresis for technicians with low acuity vision

In molecular biology laboratories, many tasks require fine motor control and high acuity vision. For example, lab technicians with visual impairment experience difficulty loading samples into the small wells of a horizontal agarose gel. We have developed a 3D-printable gel loading system which allows technicians with low-contrast vision to load gels correctly. It includes a casting tray, a bridge, and a modified comb. The system provides a high-contrast visual field to improve visibility, and the bridge allows pipette tips to be inserted at the correct location and only to the correct depth. The necessary computer files for printing this device are freely available to increase the accessibility of molecular biology laboratories to people with visual impairment.

We have produced a system for people with visual impairment to successfully load an agarose gel for gel electrophoresis. This system can be produced using a 3D printer. There are three components: a casting tray, a bridge, and a modified comb. The bridge fits into side notches in the casting tray and is suspended above the tray. The comb is inserted into the bridge while the molten gel is poured. When the gel cools, the comb is removed leaving the bridge in place. Pipettes can then only be inserted in the correct location and to the correct depth to load the wells. Importantly, the bridge and tray are contrasting colors to aid in visual discernment.

Thermo-responsive imprinted hydrogel with switchable sialic acid recognition for selective cancer cell isolation from blood

In this work, a sialic acid (SA)-imprinted thermo-responsive hydrogel layer was prepared for selective capture and release of cancer cells. The SA-imprinting process was performed at 37 °C using thermo-responsive functional monomer, thus generating switchable SA-recognition sites with potent SA binding at 37 °C and weak binding at a lower temperature (e.g., 25 °C). Since SA is often overexpressed at the glycan terminals of cell membrane proteins or lipids, the SA-imprinted hydrogel layer could be used for selective cancer cell recognition. Our results confirmed that the hydrogel layer could efficiently capture cancer cells from not only the culture medium but also the real blood samples. In addition, the captured cells could be non-invasively released by lowing the temperature. Considering the non-invasive processing mode, considerable capture efficiency, good cell selectivity, as well as the more stable and durable SA-imprinted sites compared to natural antibodies or receptors, this thermo-responsive hydrogel layer could be used as a promising and general platform for cell-based cancer diagnosis.

•

Thermo-responsive sialic acid (SA)-imprinted hydrogel layer was prepared.

•

The hydrogel layer could efficiently and selective capture cancer cells at 37 °C.

•

The captured cancer cells could be released at a lower temperature (e.g., 25 °C).

•

The hydrogel layer could be used for capture and release cancer cells from blood.

Ibuprofen-Loaded Heparin Modified Thermosensitive Hydrogel for Inhibiting Excessive Inflammation and Promoting Wound Healing

Hydrogels have been investigated as ideal biomaterials for wound treatment owing to their ability to form a highly moist environment which accelerates cell migration and tissue regeneration for prompt wound healing. They can also be used as a drug carrier for local delivery, and are able to activate immune cells to enhance wound healing. Here, we developed heparin-conjugated poly(N-isopropylacrylamide), an injectable, in situ gel-forming polymer, and evaluated its use in wound healing. Ibuprofen was encapsulated into the hydrogel to help reduce pain and excessive inflammation during healing. In addition to in vitro studies, a BALB/c mice model was used to evaluate its effect on would healing and the secretion of inflammatory mediators. The in vitro assay confirmed that the ibuprofen released from the hydrogel dramatically reduced lipopolysaccharide-induced inflammation by suppressing the production of NO, PGE2 and TNF-α in RAW264.7 macrophages. Moreover, an in vivo wound healing assay was conducted by applying hydrogels to wounds on the backs of mice. The results showed that the ibuprofen-loaded hydrogel improved healing relative to the phosphate buffered saline group. This study indicates that ibuprofen loaded in an injectable hydrogel is a promising candidate for wound healing therapy.

Heterobifunctional PEG-grafted black phosphorus quantum dots: "Three-in-One" nano-platforms for mitochondria-targeted photothermal cancer therapy

Black phosphorus (BP) nano-materials, especially BP quantum dots (BPQDs), performs outstanding photothermal antitumor effects, excellent biocompatibility and biodegradability. However, there are several challenges to overcome before offering real benefits, such as poor stability, poor dispersibility as well as difficulty in tailoring other functions. Here, a "three-in-one" mitochondria-targeted BP nano-platform, called as BPQD-PEG-TPP, was designed. In this nano-platform, BPQDs were covalently grafted with a heterobifunctional PEG, in which one end was an aryl diazo group capable of reacting with BPQDs to form a covalent bond and the other end was a mitochondria-targeted triphenylphosphine (TPP) group. In addition to its excellent near-infrared photothermal properties, BPQD-PEG-TPP had much enhanced stability and dispersibility under physiological conditions, efficient mitochondria targeting and promoted ROS production through a photothermal effect. Both in vitro and in vivo experiments demonstrated that BPQD-PEG-TPP performed much superior photothermal cytotoxicity than BPQDs and BPQD-PEG as the mitochondria targeted PTT. Thus this "three-in-one" nanoplatform fabricated through polymer grafting, with excellent stability, dispersibility and negligible side effects, might be a promising strategy for mitochondria-targeted photothermal cancer therapy.

Activation of Piezo1 by ultrasonic stimulation and its effect on the permeability of human umbilical vein endothelial cells

The acoustic radiation forces produced by ultrasonic stimulation induce shear stress on objects in the acoustic field. Piezo1, a mechanosensitive ion channel protein that is expressed on the plasma membranes of vertebrate cells, can sense shear stress and transduce it into downstream signaling. In this study, we examined the sensitivity of Piezo1 to ultrasonic stimulation and assessed its downstream biological functions in human umbilical vein endothelial cells (HUVECs). Ultrasonic stimulation using a stimulation power of 0.2 W and a frequency of 1 MHz for 10 s did not induce cell damage. However, ultrasonic stimulation induced an influx of calcium ions, which increased with an increase in the stimulation duration. Knockdown of Piezo1 protein decreased the influx of calcium ions during ultrasonic stimulation, which demonstrated that Piezo1 may be activated by the shear stress produced by ultrasonic stimulation. The influx of calcium ions in response to ultrasonic stimulation could be modulated by the Piezo1 protein level. Additionally, ultrasonic stimulation reduced the levels of downstream factors such as MLCK and ATP, which are involved in the Ca²⁺/CaM/MLCK pathway, by suppressing Piezo1. As the Ca²⁺/CaM/MLCK pathway influences the permeability of the cell membrane, the internalization of FITC-Dextran into cells under ultrasonic stimulation was validated. Ultrasonic stimulation was demonstrated to promote the increase in cell permeability, and the suppression of Piezo1 was shown to induce the decrease in cell permeability. Therefore, this study shows that ultrasonic stimulation may modulate the permeability of the membrane of HUVECs by modulating the expression of Piezo1 protein.

Dual-Core Prebiotic Microcapsule Encapsulating Probiotics for Metabolic Syndrome

Designing strategies to utilize the synergistic effect of probiotics and prebiotics is a promising way in treating metabolic-related diseases. Here, inspired by the mutually promotable but mutually incompatible characteristics of Yin and Yang, dual-core microcapsules that encapsulate Lactobacillus and Bacillus subtilis into separate compartments were presented through electrostatically driven microfluidics. The microcapsules showed acid resistance and preserved probiotic activity. They also fostered the proliferation of probiotics while creating an anaerobic environment and promoted lactic acid fermentation without affecting each other. It has been demonstrated that the microcapsules could reduce inflammation, improve fat metabolism, and restore intestinal barrier functions, thus contributing to the treatment of metabolic syndrome in vivo. These features make the dual-core microcapsules an ideal candidate for treating metabolic syndrome and related diseases.

Alginate hydrogel dressings for advanced wound management

Wound healing is a complicated and continuous process affected by several factors, and it needs an appropriate surrounding to achieve accelerated healing. At present, various wound dressings are used for wound management, such as fiber, sponge, hydrogel, foam, hydrocolloid and so on. Hydrogels can provide mechanical support and moist environment for wounds, and are widely used in biomedical field. Alginate is a natural linear polysaccharide derived from brown algae or bacteria, consisting of repeating units of β-1,4-linked D-mannuronic acid (M) and L-guluronic acid (G) in different ratios. It is widely used in biomedical and engineering fields due to its good biocompatibility and liquid absorption capacity. Alginate-based hydrogels have been used in wound dressing, tissue engineering, and drug delivery applications for decades. In this review, we summarize the recent approaches in the chemical and physical preparation and the application of alginate hydrogels in wound dressings.

Overcoming the Design Challenge in 3D Biomimetic Hybrid Scaffolds for Bone and Osteochondral Regeneration by Factorial Design

Scaffolds for bone regeneration have been engineered by a plethora of manufacturing technologies and biomaterials. However, the performance of these systems is often limited by lack of robustness in the process design, that hampers their scalability to clinical application. In the present study, Design of Experiment (DoE) was used as statistical tool to design the biofabrication of hybrid hydroxyapatite (HA)/collagen scaffolds for bone regeneration and optimize their integration in a multilayer osteochondral device. The scaffolds were synthesized via a multi-step bioinspired process consisting in HA nano-crystals nucleation on the collagen self-assembling fibers and ribose glycation was used as collagen cross-linking method to modulate the mechanical and physical properties. The process design was performed by selecting hydrogel concentration, HA/collagen ratio and cross-linker content as key variables and the fabrication was carried out basing on a full factorial design. Scaffold performances were tested by evaluating porosity, swelling ratio, degradation rate and mechanical behavior as model output responses while physicochemical properties of the constructs were evaluated by TGA, ICP, FT-IR spectroscopy, and XRD analysis. Physicochemical characterizations confirmed the nucleation of a biomimetic inorganic phase and the interaction of the HA and collagenic components. The DoE model revealed a significant interaction between HA content and collagen cross-linking in determining porosity, swelling and mechanical properties of the scaffolds. The combined effect of hydrogel concentration and mineral phase played a key role on porosity and swelling while degradation resulted to be mainly affected by the HA loading and ribose content. The model was then used to determine the suitable input parameters for the synthesis of multi-layer scaffolds with graded mineralization rate, that can be used to mimic the whole cartilage-bone interface. This work proved that experimental design applied to complex biofabrication processes represents an effective and reliable way to design hybrid constructs with standardized and tunable properties for osteochondral tissue engineering.

Assessment of Dimethoate in Olive Oil Samples Using a Dual Responsive Molecularly Imprinting-Based Approach

A new generation of advanced materials developed by molecular imprinting technology showing a stimuli-responsive functionality are emerging. The switchable ability to control the uptake/release of the target analyte by action of external stimulus combined with a remarkable selectivity and specificity, makes these functional materials very attractive for sample preparation purposes. In this work, the usefulness of a sample preparation tool for the selective enrichment/pre-concentration of dimethoate from olive oil spiked samples based on "tailor-made" dual responsive magnetic and photonic molecularly imprinted polymers as sorbents is explored. To achieve this goal, a smart molecularly imprinted polymer (MIP) possessing magnetic and photonic responsiveness was successfully synthesized, and its physico-chemical and morphological characterization was assessed. Further, the trace analysis of dimethoate in spiked olive oil samples was validated and successfully implemented using smart-MIPs as sorbents in the sample preparation step, with high recoveries (83.5 ± 0.3%) and low detection limit (0.03µg·mL-1).

Perceptions and Misconceptions in Molecular Recognition: Key Factors in Self-Assembling Multivalent (SAMul) Ligands/Polyanions Selectivity

Biology is dominated by polyanions (cell membranes, nucleic acids, and polysaccharides just to name a few), and achieving selective recognition between biological polyanions and synthetic systems currently constitutes a major challenge in many biomedical applications, nanovectors-assisted gene delivery being a prime example. This review work summarizes some of our recent efforts in this field; in particular, by using a combined experimental/computation approach, we investigated in detail some critical aspects in self-assembled nanomicelles and two major polyanions—DNA and heparin.

Sanitization During and After COVID-19 Pandemic: A Short Review

Sanitization is a preventive and strategic method to contain the spread of SARS-CoV2. Since there is no foolproof method to tackle the present COVID-19 pandemic, sanitization has a central role to play. The present article briefly reviews various methods of sanitization for individuals, surfaces and ambience. The article reviews different approaches toward sanitization and examines the historicity of the methods employed.

Affinity purification of multifunctional oligomeric ligands synthesizedviacontrolled radical polymerization

Abiotic oligomeric ligands with a strong affinity for a target peptide sequence were isolated by affinity purification from a pool of 30-mer acrylic random ter-oligomers that were synthesizedviaa controlled radical polymerization process.