Microemulsion system with improved loading of piroxicam: a study of microstructure

Extracellular vesicles: powerful candidates in nano-drug delivery systems

Extracellular vesicles (EVs), which are nanoparticles that are actively released by cells, contain a variety of biologically active substances, serve as significant mediators of intercellular communication, and participate in many processes, in health and pathologically. Compared with traditional nanodrug delivery systems (NDDSs), EVs have unique advantages due to their natural physiological properties, such as their biocompatibility, stability, ability to cross barriers, and inherent homing properties. A growing number of studies have reported that EVs deliver therapeutic proteins, small-molecule drugs, siRNAs, miRNAs, therapeutic proteins, and nanomaterials for targeted therapy in various diseases. However, due to the lack of standardized techniques for isolating, quantifying, and characterizing EVs; lower-than-anticipated drug loading efficiency; insufficient clinical production; and potential safety concerns, the practical application of EVs still faces many challenges. Here, we systematically review the current commonly used methods for isolating EVs, summarize the types and methods of loading therapeutic drugs into EVs, and discuss the latest progress in applying EVs as NDDs. Finally, we present the challenges that hinder the clinical application of EVs.

Formulation and in vitro characterization of nanoemulsions containing remdesivir or licorice extract: A potential subcutaneous injection for coronavirus treatment

The management of coronavirus necessitates that medicines are available, reasonably priced, and easy to administer. The work aimed at formulating and characterizing remdesivir and licorice extract nanoemulsions and comparing their efficacy against coronavirus for further subcutaneous injection. First, the solubility of remdesivir was determined in different oils, surfactants, and co-surfactants to choose the optimal nanoemulsion components. Nanoemulsions were optimized concerning surfactant: co-surfactant ratio (5:1, 4:1, 3:1, 2:1, and 1:1) and oil to surfactant: co-surfactant ratio (1:9, 1:8, 1:7, 1:6, 1:5, 1:4, 1:3, 1:2, and 1:1). The formulations were evaluated concerning % transmittance, emulsification time, pH, viscosity, droplet size, polydispersity index, zeta potential, drug content, transmission electron microscopy, in-vitro drug release, stability (of the optimal formulas), and antiviral effect against coronavirus. The optimal nanoemulsion formula was F7, exhibiting an acceptable pH level, a rapid emulsification rate, a viscosity of 20 cP, and 100% drug content. The formulation droplet size was 16 and 17 nm, the polydispersity index was 0.18 and 0.26, and the zeta potential was - 6.29 and - 10.34 mV for licorice extract and remdesivir nanoemulsions, respectively. However, licorice extract nanoemulsion exhibited better release and physical stability. Licorice extract nanoemulsion may be a potential subcutaneous injection for combating mild to moderate coronavirus.

Preparation, characteristics, and performance of the microemulsion system in the removal of oil from beach sand

Oil deposited on shoreline substrates has serious adverse effects on the coastal environment and can persist for a long time. In this study, a green and effective microemulsion (ME) derived from vegetable oil was developed as a washing fluid to remove stranded oil from beach sand. The pseudo-ternary phase diagrams of the castor oil/water (without or without NaCl)/Triton X-100/ethanol were constructed to determine ME regions, and they also demonstrated that the phase behaviors of ME systems were almost independent of salinity. ME-A and ME-B exhibited high oil removal performance, low surfactant residues, and economic benefits, which were determined to be the W/O microstructure. Under optimal operation conditions, the oil removal efficiencies for both ME systems were 84.3 % and 86.8 %, respectively. Moreover, the reusability evaluation showed that the ME system still had over 70 % oil removal rates, even though it was used six times, implying its sustainability and reliability.

Itraconazole-loaded microemulsions: formulation, characterization, and dermal delivery using shed snakeskin as the model membrane

Microemulsions (MEs) were developed for dermal delivery of 1% w/w itraconazole (ITZ). Solubility of ITZ in various oils was investigated and clove oil was selected as oil phase. Pseudoternary phase diagrams were constructed by titration method. The system containing clove oil as oil phase, Tween^®80 as surfactant, and 1:1 mixture of water and polyethylene glycol 400 as aqueous phase provided the largest ME region. It was selected for the formulation development of ITZ-loaded MEs. Physicochemical stability was evaluated at 4 °C, room temperature (25 °C), and 45 °C for three months. In vitro permeation and retention studies were assessed using shed snakeskin as a model membrane. Antifungal activity was investigated by agar diffusion method. Results indicated that incorporation of ITZ in the selected MEs did not affect physical properties. Physicochemical data after storage periods revealed that the most suitable storage temperature was 4 °C. Skin permeation and retention data indicated that water-in-oil (w/o) ITZ-loaded MEs had superior dermal delivery of ITZ than oil-in-water (o/w) ITZ-loaded ME and ITZ-oily solution. Moreover, w/o ITZ-loaded MEs showed larger inhibition zones against C. albicans and T. rubrum than a commercial gel. Therefore, w/o ITZ-loaded MEs possibly provided effective dermal delivery and antifungal activity to treat superficial fungal infections.

The Development and Evaluation of Phase Transition Microemulsion for Ocular Delivery of Acetazolamide for Glaucoma Treatment

The aim of this study was to develop microemulsion (ME) formulation with possible phase transition into liquid crystals upon ocular application to enhance acetazolamide bioavailability. Pseudoternary phase diagrams were constructed using olive oil or castor oil (oily phase), Tween 80 (surfactant), and sodium carbonate solution (aqueous phase). Microemulsion and liquid crystal (LC) formulations were selected from the constructed phase diagrams and were evaluated for rheological properties and in vitro drug release. The efficacy of the developed formulations in reducing intraocular pressure (IOP) was assessed in vivo. In vitro release study showed slower release rate from LC and ME compared with drug solution with the release from LC being the slowest. Ocular application of acetazolamide ME formulations or aqueous solution resulted in significant reduction in IOP from baseline. The recorded T_max values indicated faster onset of action for acetazolamide aqueous solution (1 h) compared with ME systems (3 h). However, the duration of action was prolonged and the reduction in IOP continued for up to 10 h in case of MEs, while that of aqueous solution was only for 4-5 h. The study suggested ME formulations for ocular delivery of acetazolamide with enhanced efficacy and prolonged duration of action.

Microemulsified Gel Formulations for Topical Delivery of Clotrimazole: Structural and In Vitro Evaluation

Microemulsified gels (μEGs) with fascinating functions have become indispensable as topical drug delivery systems due to their structural flexibility, high stability, and facile manufacturing process. Topical administration is an attractive alternative to traditional methods because of advantages such as noninvasive administration, bypassing first-pass metabolism, and improving patient compliance. In this article, we report on the new formulations of microemulsion-based gels suitable for topical pharmaceutical applications using biocompatible and ecological ingredients. For this, two biocompatible μE formulations comprising clove oil/Brij-35/water/ethanol (formulation A) and clove oil/Brij-35/water/1-propanol (formulation B) were developed to encapsulate and improve the load of an antimycotic drug, Clotrimazole (CTZ), and further gelatinized to control the release of CTZ through skin barriers. By delimiting the pseudo-ternary phase diagram, optimum μE formulations with clove oil (∼15%) and Brij-35 (∼30%) were developed, keeping constant surfactant/co-surfactant ratio (1:1), to upheld 2.0 wt % CTZ. The as-developed formulations were further converted into smart gels by adding 2.0 wt % carboxymethyl cellulose (CMC) as a cross-linker to adhere to the controlled release of CTZ through complex skin barriers. Electron micrographs show a fine, monodispersed collection of CTZ-μE nanodroplets (∼60 nm), which did not coalesce even after gelation, forming spherical CTZ-μEG (∼90 nm). However, the maturity of CTZ nanodroplets observed by dynamic light scattering suggests the affinity of CTZ for the nonpolar microenvironment, which was further supported by the peak-to-peak correlation of Fourier transform infrared (FTIR) analysis and fluorescence measurement. In addition, HPLC analysis showed that the in vitro permeation release of CTZ-μEG from rabbit skin in the ethanolic phosphate buffer (pH = 7.4) was significantly increased by >98% within 6.0 h. This indicates the sustained release of CTZ in μEBG and the improvement in transdermal therapeutic efficacy of CTZ over its traditional topical formulations.

Microemulsions: Unique Properties, Pharmacological Applications, and Targeted Drug Delivery

Microemulsions, comprising oil, water and a surfactant, in association with some co-surfactant, are thermodynamically stable systems. They have found applications in a large number of chemical and pharmacological processes due to their unique properties such as large interfacial area, low interfacial tension, and most importantly, the ability to solubilize and deliver hydrophobic drugs. In addition to the oral and intravenous route, they are suitable for drug delivery through the ophthalmic, vaginal, pulmonary, dental, and topical routes. This review highlights the properties and several recent developments in the use of microemulsions for medical treatment purposes including targeted drug delivery.

A review of the antimicrobial activity of thermodynamically stable microemulsions

Microemulsions are thermodynamically stable, transparent, isotropic mixtures of oil, water and surfactant (and sometimes a co-surfactant), which have shown potential for widespread application in disinfection and self-preservation. This is thought to be due to an innate antimicrobial effect. It is suggested that the antimicrobial nature of microemulsions is the result of a combination of their inherent kinetic energy and their containing surfactants, which are known to aid the disruption of bacterial membranes. This review examines the contemporary evidence in support of this theory.

Formation of Antihyperlipidemic Nano-Ezetimibe from Volatile Microemulsion Template for Enhanced Dissolution Profile

Nanostructures play an important role in targeting sparingly water-soluble drugs to specific sites. Because of the structural flexibility and stability, the use of template microemulsions (μEs) can produce functional nanopharmaceuticals of different sizes, shapes, and chemical properties. In this article, we report a new volatile oil-in-water (o/w) μE formulation comprising ethyl acetate/ethanol/brij-35/water to obtain the highly water-dispersible nanoparticles of an antihyperlipidemic agent, ezetimibe (EZM-NPs), to enhance its dissolution profile. A pseudoternary phase diagram was delineated in a specified brij-35/ethanol ratio (1:1) to describe the transparent, optically isotropic domain of the as-formulated μE. The water-dilutable μE formulation, comprising an optimum composition of ethyl acetate (18.0%), ethanol (25.0%), brij-35 (25.0%), and water (32.0%), showed a good dissolvability of EZM around 4.8 wt % at pH 5.2. Electron micrographs showed a fine monomodal collection of EZM-loaded μE droplets (∼45 nm) that did not coalesce even after lyophilization, forming small spherical EZM-NPs (∼60 nm). However, the maturity of nanodrug droplets observed through dynamic light scattering suggests the affinity of EZM to the nonpolar microenvironment, which was further supported through peak-to-peak correlation of infrared analysis and fluorescence measurements. Moreover, the release profile of the as-obtained EZM-nanopowder increased significantly >98% in 30 min, which indicates that a reduced drug concentration will be needed for capsules or tablets in the future and can be simply incorporated into the multidosage formulation of EZM.

A Mixed Micellar Formulation for the Transdermal Delivery of an Indirubin Analog

Indirubin is an active component of Dang Gui Long Hui Wan, which has been used in traditional Chinese medicine to treat inflammatory diseases as well as for the prevention and treatment of human cancer, such as chronic myeloid leukemia. The therapeutic effects of indirubin analogs have been underestimated due to its poor water solubility and low bioavailability. To improve the solubility and bioavailability of indirubin analogs, we prepared a mixed micellar formulation with Kolliphor® EL and Tween 80 as surfactants, and PEG 400 as a co-surfactant, followed by complexation with (2-hydroxyproply)-β-cyclodextrin at appropriate ratios. Overall, improving the solubility and skin penetration of indirubin analogs can increase clinical efficacy and provide maximum flux through the skin.

Fourth-Generation Antibiotic Gatifloxacin Encapsulated by Microemulsions: Structural and Probing Dynamics

To overcome the increased disease rate, utilization of the versatile broad spectrum antibiotic drugs in controlled drug-delivery systems has been a challenging and complex consignment. However, with the development of microemulsion (μE)-based formulations, drugs can be effectively encapsulated and transferred to the target source. Herein, two biocompatible oil-in-water (o/w) μE formulations comprising clove oil/Tween 20/ethylene glycol/water (formulation A) and clove oil/Tween 20/1-butanol/water (formulation B) were developed for encapsulating the gatifloxacin (GTF), a fourth-generation antibiotic. The pseudoternary phase diagrams were mapped at a constant surfactant/co-surfactant (1:1) ratio to bound the existence of a monophasic isotropic region for as-formulated μEs. Multiple complementary characterization techniques, namely, conductivity (σ), viscosity (η), and optical microscopy analyses, were used to study the gradual changes that occurred in the microstructure of the as-formulated μEs, indicating the presence of a percolation transformation to a bicontinuous permeate flow. GTF showed good solubility, 3.2 wt % at pH 6.2 and 4.0 wt % at pH 6.8, in optimum μE of formulation A and formulation B, respectively. Each loaded μE formulation showed long-term stability over 8 months of storage. Moreover, no observable aggregation of GTF was found, as revealed by scanning transmission electron microscopy and peak-to-peak correlation of IR analysis, indicating the stability of GTF inside the formulation. The average particle size of each μE, measured by dynamic light scattering, increased upon loading GTF, intending the accretion of drug in the interfacial layers of microdomains. Likewise, fluorescence probing sense an interfacial hydrophobic environment to GTF molecules in any of the examined formulations, which may be of significant interest for understanding the kinetics of drug release.

Surfactant-Free Microemulsions of 1-Butyl-3-methylimidazolium Hexafluorophosphate, Diethylammonium Formate, and Water

Surfactant-free microemulsions (SFMEs) are a unique kind of microemulsion, which form from immiscible fluids (i.e., oil and water phases) in the presence of amphi-solvents rather than traditional surfactants. In comparison with traditional surfactant-based microemulsions (SBMEs), SFMEs have received much less attention, and the current understanding of the unique system is very limited. Herein, we report a SFME consisting of the hydrophobic ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF₆), the protic IL diethylammonium formate (DEAF), and water, in which the bmimPF₆ and DEAF are used as the oil phase and amphi-solvent, respectively. Three kinds of microstructures, namely, water-in-bmimPF₆ (W/IL), bicontinuous (BC), and bmimPF₆-in-water (IL/W), are identified for the SFME, using cyclic voltammetry, cryo-TEM, and DLS techniques. Especially, the volumetric and surface free energy properties of the SFME are investigated by excess molar volume ( V_m^E) and surface tension (γ) measurements, and they are found to be similar to those of SBMEs. Discontinuous changes in V_m^E and γ with the system compositions are observed as the system microstructures change, which can be used to identify the structural transition of SFMEs. We think this study provides a better understanding of SFME features.

Extracellular vesicles as an efficient nanoplatform for the delivery of therapeutics

Extracellular vesicles (EVs) are membrane-derived vesicles that are enriched with RNAs, proteins and other functional molecules. We exploit the unique physical properties of EVs as a promising and advantageous nanoplatform for the delivery of therapeutic drugs and genetic materials. Early successes in the discovery of various disease-related characteristics of EVs have driven a new wave of innovation in developing nanoscale drug-delivery systems (DDSs). Nevertheless, there are several issues that need to be considered during the development of these alternative DDSs, such as standardized isolation and preservation methods, efficient drug encapsulation, mechanisms of drug release and so on. In this mini-review, we summarize the current status and progress of EV-based DDSs as an efficient nanoplatform for therapeutics delivery, followed by a discussion on their challenges and future prospects for clinical translation and applications.

Encapsulation of Antibiotic Levofloxacin in Biocompatible Microemulsion Formulation: Insights from Microstructure Analysis

Microemulsions (μEs) are unique systems that offer exciting perspectives in biophysical research for mimicing biomembranes at the molecular level. In the present study, biocompatible μE formulation of a new oil-in-water (o/w) system comprising clove oil/Tween 20/2-propanol/water was accomplished for encapsulating an antibiotic, levofloxacin (LVF). The pseudoternary phase diagram was delineated at a constant cosurfactant/surfactant (2:1) ratio to meet the economic feasibility. The gradual changes occurring in the microstructure of the as-formulated four-component μEs were explored via multiple complementary characterization techniques. The results of electrical conductivity (σ), viscosity (η), and optical microscopic measurements suggested the existence of a percolation transition to a bicontinuous structure in the microregions of the as-formulated μE. LVF displayed a high solubility (5.0 wt %) at the pH of 6.9 in an optimum μE formulation comprising 2-propanol (36.4%), Tween 20 (18.2%), clove oil (20.7%), and water (24.7%). The LVF-loaded μE composition showed long-term stability for over 6 months of storage. Fourier transform IR analysis showed that LVF was stable inside the μE formulation, indicating the absence of any possible aggregation of LVF. Dynamic light scattering revealed that the average particle size of drug-free μE (64.5 ± 3.4 nm) increases to 129.7 ± 5.8 nm upon loading of LVF, suggesting the accumulation of LVF in the interfacial layers of the micelles. Moreover, fluorescence measurements indicated that LVF might be localized in the interfacial film of μE system, which may result in a controlled release of drug.

Formulation and evaluation of sublingual delivery of piroxicam using thermosensitive polymer with an inverted Franz diffusion cell

Objectives

The aim of the study was to prepare a sublingual formulation for piroxicam using a thermosensitive polymer and to evaluate its permeation through porcine sublingual mucosa.

Methods

Formulation technique utilized the transition property of poloxamer from solution state at room temperature to gel state at oromucosal temperature (37 °C). The permeation of the drug was evaluated using an inverted Franz diffusion cell technique that allowed the dosage form to be directly applied onto the substrate with required volume of saliva. The formulation was characterized for microscopy of the piroxicam crystals, sol–gel transition property and in-vitro diffusion study.

Key findings

Poloxamer-based formulation enhanced solubility and increased permeability of the piroxicam.

Conclusion

Poloxamer formulation with 0.1% w/w piroxicam delivered a cumulative amount of 11.99 ± 7.82 and 11.23 ± 1.79 μg/cm2, while non-poloxamer formulation delivered 3.57 ± 2.20 and 4.60 ± 6.90 μg/cm2 with 0.1 and 0.5 ml artificial saliva, respectively, through porcine sublingual tissue in 6 h. A similar delivery profile was observed for 0.05% w/w piroxicam formulation as well.

In Vitro Intestinal Permeability Studies and Pharmacokinetic Evaluation of Famotidine Microemulsion for Oral Delivery

The absolute bioavailability of famotidine after oral administration is about 40-45% and absorbance only in the initial part of small intestine may be due to low intestinal permeability. Hence, an olive oil based microemulsion formulation with Tween-80 as surfactant and PEG-400 as cosurfactant was developed by using water titration method with the aim of enhancing the intestinal permeability as well as oral bioavailability. In vitro drug permeation in intestine after 8 h for all formulations varied from 30.42% to 78.39% and most of the formulations showed enhanced permeation compared to pure drug (48.92%). Famotidine microemulsion exhibited the higher absorption and C max⁡ achieved from the optimized famotidine formulation (456.20 ng·h/ml) was higher than the standard (126.80 ng·h/mL). It was found that AUC0-24 h obtained from the optimized famotidine test formulation (3023.5 ng·h/mL) was significantly higher than the standard famotidine (1663.3 ng·h/mL). F-1 demonstrated a longer (6 h) T max⁡ compared with standard drug (2 h) and sustained the release of drug over 24 h. The bioavailability of F-1 formulation was about 1.8-fold higher than that of standard drug. This enhanced bioavailability of famotidine loaded in microemulsion system might be due to increased intestinal permeability.

Formulation of oil-in-water β-carotene microemulsions: effect of oil type and fatty acid chain length

The impact of oil type and fatty acid chain length on the development of food-grade microemulsions for the entrapment of β-carotene was investigated. The microemulsion region of a ternary phase diagram containing short chain monoglycerides was larger than for di- and triglycerides when Tween 80 was used as surfactant. The cytotoxicity of microemulsions composed of a 30% monoglyceride oil, 20% Tween 80 and 50% aqueous buffer were evaluated using an in vitro cell culture model (human epithelial colorectal adenocarcinoma, Caco-2). The cytotoxicity test showed that the viability of Caco-2 cells against β-carotene microemulsions at concentrations of 0.03125% (v/v) was higher than 90%. This study suggests that short chain monoglycerides could be used with Tween 80 to prepare transparent β-carotene-encapsulated O/W microemulsions in the particle size range of 12-100 nm.

Effect of lipolysis on drug release from self-microemulsifying drug delivery systems (SMEDDS) with different core/shell drug location

The objective of this study is to investigate the effect of lipolysis on the release of poorly water-soluble drug from SMEDDS in the perspective of drug core/shell location. For this purpose, four SMEDDS formulations with various core/shell properties were developed based on long-chain lipid or medium-chain lipid as well as different surfactant/oil ratios. Poorly water-soluble drugs, hymecromone and resveratrol, were significantly solubilized in all SMEDDS formulations and the diluted microemulsions. Fluorescence spectra analysis indicated that hymecromone was mainly located in the shell of microemulsions, while resveratrol was located in the core. The effect of lipolysis on the release rates of drugs with different core/shell locations were investigated by a modified in vitro drug release model. For the drug located in the shell, hymecromone, the release profiles were not affected during the lipolysis process and no significant differences were observed among four formulations. For the drug located in the core, resveratrol, the release rates were increased to various degrees depending on the extent of digestion. In conclusion, the drug core/shell location plays an important role for determining the effect of lipolysis on drug release from SMEDDS formulation.

Ondansetron HCl Microemulsions for Transdermal Delivery: Formulation and In Vitro Skin Permeation

Ondansetron HCl delivery through oral route suffers due to its low bioavailability due to first-pass metabolism. Therefore, the microemulsion-based transdermal delivery may be a better substitute for it. The pseudoternary phase diagrams were constructed to determine compositions of microemulsions, and ondansetron HCl microemulsions for transdermal delivery were developed using isopropyl myristate or oleic acid as the oil phase, Tween 80 as the surfactant, and isopropyl alcohol as the cosurfactant evaluated for in vitro skin permeation through excised porcine skin. The in vitro skin permeation from these formulated microemulsions was sustained over 24 hours. The microemulsion F-8 (contained 10% of isopropyl myristate as oil phase, 8% of aqueous phase, and 82% of surfactant phase containing Tween 80 and isopropyl alcohol, 3 : 1) showed the highest permeation flux of 0.284 ± 0.003 μg/cm(2)/hour. All these microemulsions followed the Korsmeyer-Peppas model (R(2) = 0.971  to  0.998) with non-Fickian, "anomalous" mechanism over a period of 24 hours.

Capillary flooding of wood with microemulsions from Winsor I systems

A new approach based on microemulsions formulated with at least 85% water and minority components consisting of oil (limonene) and surfactant (anionic and nonionic) is demonstrated for the first time to be effective for flooding wood's complex capillary structure. The formulation of the microemulsion was based on phase behavior scans of Surfactant-Oil-Water systems (SOWs) and the construction of pseudo-ternary diagrams to localize thermodynamically stable one-phase emulsion systems with different composition, salinity and water-to-oil ratios. Wicking and fluid penetration isotherms followed different kinetic regimes and indicated enhanced performance relative to that of the base fluids (water, oil or surfactant solutions). The key properties of microemulsions to effectively penetrate the solid structure are discussed; microemulsion formulation and resultant viscosity are found to have a determining effect in the extent of fluid uptake. The solubilization of cell wall components is observed after microemulsion impregnation. Thus, the microemulsion can be tuned not only to effectively penetrate the void spaces but also to solubilize hydrophobic and hydrophilic components. The concept proposed in this research is expected to open opportunities in fluid sorption in fiber systems for biomass pretreatment, and delivery of hydrophilic or lipophilic moieties in porous, lignocellulosics.