Biologic comparison of inhaled insulin formulations: Exubera™ and novel spray-dried engineered particles of dextran-10

Local Treatment of Non-small Cell Lung Cancer with a Spray-Dried Bevacizumab Formulation

Local delivery of biotherapeutics to the lung holds great promise for treatment of lung diseases, but development of physically stable, biologically active dry powder formulations of large molecules for inhalation has remained a challenge. Here, spray drying was used to manufacture a dry powder pulmonary formulation of bevacizumab, a monoclonal antibody approved to treat non-small cell lung cancer (NSCLC) by intravenous infusion. By reformulating bevacizumab for local delivery, reduced side effects, lower doses, and improved patient compliance are possible. The formulation had aerosol properties suitable for delivery to the deep lung, as well as good physical stability at ambient temperature for at least 6 months. Bevacizumab’s anti-VEGF bioactivity was not impacted by the manufacturing process. The formulation was efficacious in an in vivo rat model for NSCLC at a 10-fold decrease in dose relative to the intravenous control.

Contemporary Formulation Development for Inhaled Pharmaceuticals

Pulmonary delivery has gained increased interests over the past few decades. For respiratory conditions, targeted drug delivery directly to the site of action can achieve a high local concentration for efficacy with reduced systemic exposure and adverse effects. For systemic conditions, the unique physiology of the lung evolutionarily designed for rapid gaseous exchange presents an entry route for systemic drug delivery. Although the development of inhaled formulations has come a long way over the last few decades, many aspects of it remain to be elucidated. In particular, a reliable and well-understood method for in vitro-in vivo correlations remains to be established. With the rapid and ongoing advancement of technology, there is much potential to better utilise computational methods including different types of modelling and simulation approaches to support inhaled formulation development. This review intends to provide an introduction on some fundamental concepts in pulmonary drug delivery and inhaled formulation development followed by discussions on some challenges and opportunities in the translation of inhaled pharmaceuticals from preclinical studies to clinical development. The review concludes with some recent advancements in modelling and simulation approaches that could play an increasingly important role in modern formulation development of inhaled pharmaceuticals.

Rifampicin-Carbohydrate Spray-Dried Nanocomposite: A Futuristic Multiparticulate Platform For Pulmonary Delivery

Purpose

Rifampicin, a first-line anti-tuberculosis drug, was loaded into a carbohydrate-based spray-dried nanocomposite with the aim to design a dry powder inhalation formulation. This strategy can enable efficient distribution of rifampicin within the lungs, localizing its action, enhancing its bioavailability and reducing its systemic exposure consequently side effects.

Methods

The respirable nanocomposite was developed utilizing spray drying of rifampicin nanosuspension employing a combination of mannitol, maltodextrin and leucine as microparticles matrix formers. Detailed physicochemical characterization and in-vitro inhalation properties of the nanocomposite particles were investigated. Compatibility studies were carried out using differential scanning calorimetry and Infrared spectroscopy techniques. Moreover, pulmonary in-vitro cytotoxicity on alveolar basal epithelial cells was performed and evaluated.

Results

Nanocomposite-based rifampicin-loaded dry inhalable powder containing maltodextrin, mannitol and leucine at a ratio of 2:1:1 was successfully formulated. Rifampicin loading efficiency into the carbohydrate nanocomposite was in the range of 89.3% to 99.2% w/w with a suitable particle size (3.47-6.80 µm) and unimodal size distribution. Inhalation efficiency of the spray-dried nanosuspension was significantly improved after transforming into an inhalable carbohydrate composite. Specifically, mannitol-based powder had higher respirable fraction (49.91%) relative to the corresponding formulation of maltodextrin. Additionally, IC₅₀ value of rifampicin nanocomposite was statistically significantly higher than that of free drug thus providing superior safety profile on lung tissues.

Conclusion

The obtained results suggested that spray drying of rifampicin nanosuspension utilizing carbohydrates as matrix formers can enhance drug inhalation performance and reduce cellular toxicity. Thus, representing an effective safer pulmonary delivery of anti-tuberculosis drugs.

Chitosan-based binary dry powder inhaler carrier with nanometer roughness for improving in vitro and in vivo aerosolization performance

Suitable nanometer roughness favors interactions between drugs and carriers, and it is a promising approach to enhance the aerosolization performance of carrier-based dry powder inhalers (DPIs). In this study, by altering the molecular migration rates, chitosan-based binary carriers (CBBCs) with nanometer roughness were fabricated for DPIs. Comprehensive physicochemical characterizations were conducted to elucidate the formation mechanism of the CBBCs. It was hypothesized that different constituent ratios in the formulations would result in different assembling of the particles and diverse roughness scales. The fine particle fractions (FPF, approximately 40~60%) of nanometer roughness CBBC-based DPI formulations were satisfactory, demonstrating the enhancement of the in vitro aerodynamic performance. The positive correlation (R² = 0.9883) between the nanometer roughness and FPF was revealed, and the surface roughness of 20 nm might achieve the best aerosolization performance. CBBCs (optimal formulations) showed no difference in cytotoxicity on A549 and Calu-3 cells (p > 0.05). Additionally, the increased C_max and AUC_0-8h of the formulation with the nanometer roughness (p < 0.05) were observed in pharmacokinetic studies, which resulted from the improved in vivo aerosolization performance. In summary, the CBBCs were a prospective tool to improve the in vitro and in vivo aerosolization performance of DPIs. Graphical abstract ᅟ.

Inhaled formulation and device selection: bridging the gap between preclinical species and first-in-human studies

The factors that influence inhaled first-in-human (FIH) device and formulation selection often differ significantly from the factors that have influenced the preceding preclinical experiments and inhalation toxicology work. In order to minimize the risk of delivery issues negatively impacting a respiratory pipeline program, the preclinical and FIH delivery systems must be considered holistically. This topic will be covered in more detail in this paper. Several examples will be presented that highlight how appropriate scientific strategy can help bridge the gap between delivering to preclinical species and human. Considerations for the FIH device selection (metered dose inhaler, dry powder inhaler and nebulizer) and formulation optimization for small molecules will be discussed in context with the preclinical delivery systems.

Dry powder inhalable formulations for anti-tubercular therapy

Tuberculosis (TB) is an intracellular infectious disease caused by the airborne bacterium, Mycobacterium tuberculosis. Despite considerable research efforts, the treatment of TB continues to be a great challenge in part due to the requirement of prolonged therapy with multiple high-dose drugs and associated side effects. The delivery of pharmacological agents directly to the respiratory system, following the natural route of infection, represents a logical therapeutic approach for treatment or vaccination against TB. Pulmonary delivery is non-invasive, avoids first-pass metabolism in the liver and enables targeting of therapeutic agents to the infection site. Inhaled delivery also potentially reduces the dose requirement and the accompanying side effects. Dry powder is a stable formulation of drug that can be stored without refrigeration compared to liquids and suspensions. The dry powder inhalers are easy to use and suitable for high-dose formulations. This review focuses on the current innovations of inhalable dry powder formulations of drug and vaccine delivery for TB, including the powder production method, preclinical and clinical evaluations of inhaled dry powder over the last decade. Finally, the risks associated with pulmonary therapy are addressed. A novel dry powder formulation with high percentages of respirable particles coupled with a cost effective inhaler device is an appealing platform for TB drug delivery.

Future prospect of insulin inhalation for diabetic patients: The case of Afrezza versus Exubera

The current review was designed to compare between the insulin inhalation systems Exubera and Afrezza and to investigate the reasons why Exubera was unsuccessful, when Afrezza maker is expecting their product to be felicitous. In January 2006, Pfizer secured FDA and EC approval for the first of its kind, regular insulin through Exubera inhaler device for the management of types 1 and 2 diabetes mellitus (DM) in adults. The product was no longer available to the market after less than two years from its approval triggering a setback for competitive new inhalable insulins that were already in various clinical development phases. In contrary, MannKind Corporation started developing its ultra-rapid-acting insulin Afrezza in a bold bid, probably by managing the issues in which Exubera was not successful. Afrezza has been marketed since February, 2015 by Sanofi after getting FDA approval in June 2014. The results from this systematic review indicate the effectiveness of insulin inhalation products, particularly for patients initiating insulin therapy. Pharmaceutical companies should capitalize on the information available from insulin inhalation to produce competitive products that are able to match the bioavailability of subcutaneous (SC) insulin injection and to deal with the single insulin unit increments and basal insulin requirements in some diabetic patients or extending the horizon to inhalable drug products with completely different drug entities for other indications.

Inhaled PYY(3-36) dry-powder formulation for appetite suppression

OBJECTIVE

Peptide YY3-36 [PYY(3-36)] has shown efficacy in appetite suppression when dosed by injection modalities (intraperitoneal (IP)/subcutaneous). Transitioning to needle-free delivery, towards inhalation, often utilizes systemic pharmacokinetics as a key endpoint to compare different delivery methods and doses. Systemic pharmacokinetics were evaluated for PYY3-36 when delivered by IP, subcutaneous, and inhalation, the systemic pharmacokinetics were then used to select doses in an appetite suppression pharmacodynamic study.

METHODS

Dry-powder formulations were manufactured by spray drying and delivered to mice via nose only inhalation. The systemic plasma, lung tissue, and bronchoalveolar lavage fluid pharmacokinetics of different inhalation doses of PYY(3-36) were compared to IP and subcutaneous efficacious doses. Based on these pharmacokinetic data, inhalation doses of 70:30 PYY(3-36):Dextran T10 were evaluated in a mouse model of appetite suppression and compared to IP and subcutaneous data.

RESULTS

Inhalation pharmacokinetic studies showed that plasma exposure was similar for a 2 × higher inhalation dose when compared to subcutaneous and IP delivery. Inhalation doses of 0.22 and 0.65 mg/kg were for efficacy studies. The results showed a dose-dependent (not dose proportional) decrease in food consumption over 4 h, which is similar to IP and subcutaneous delivery routes.

CONCLUSIONS

The pharmacokinetic and pharmacodynamics results substantiate the ability of pharmacokinetic data to inform pharmacodynamics dose selection for inhalation delivery of the peptide PYY(3-36). Additionally, engineered PYY(3-36):Dextran T10 particles delivered to the respiratory tract show promise as a non-invasive therapeutic for appetite suppression.