Development and Characterization of Florfenicol-Loaded BSA Nanoparticles as Controlled Release Carrier

Development, in vitro and ex vivo characterization of lamotrigine-loaded bovine serum albumin nanoparticles using QbD approach

The present study aimed to prepare and optimize lamotrigine-loaded bovine serum albumin nanoparticles (LAM-NP) using the Quality by Design (QbD) approach and to investigate both the in vitro and ex vivo effects of different cross-linking agents glutaraldehyde (GLUT), glucose (GLUC) and 1-(3-dimethylaminutesopropyl)-3-ethylcarbodiimide hydrochloride (EDC) on intranasal applicability. Cross-linked LAM-NP from EDC (NP-EDC-1) showed the lowest Z-average value (163.7 ± 1.9 nm) and drug encapsulation efficacy (EE%) of 97.31 ± 0.17%. The drug release of GLUC cross-linked LAM-NP (NP-GLUC-9), glutaraldehyde cross-linked LAM-NP (NP-GLUT-2), and NP-EDC-1 at blood circulation conditions was higher than the initial LAM. The results of the blood-brain barrier parallel artificial membrane permeability assay (BBB-PAMPA) showed an increase in the permeability of LAM through the BBB with NP-GLUC-9 and an increase in flux with all selected formulations. The ex vivo study showed that LAM diffusion from the selected formulations through the human nasal mucosa was higher than in case of initial LAM. The cytotoxicity study indicated that BSA-NP reduced LAM toxicity, and GLUC 9 mM and EDC 1 mg could be alternative cross-linking agents to avoid GLUT 2% v/v toxicity. Furthermore, permeability through Caco-2 cells showed that nasal epithelial transport/absorption of LAM was improved by using BSA-NPs. The use of BSA-NP may be a promising approach to enhance the solubility, permeability through BBB and decrease the frequency of dosing and adverse effects of LAM.

Development and in vitro evaluation of a lignin-PLGA nanocarrier for florfenicol delivery

Florfenicol (FF) is a widely used antimicrobial in veterinary medicine because of its broad antimicrobial activity, although it has certain limitations and raises concerns about the development of antimicrobial resistance genes. These limitations highlight the need to explore novel drug with controlled release systems to enhance the therapeutic efficacy of FF, while minimizing the potential for resistance development. This study introduces an innovative approach for the design, synthesis, and evaluation of lignin-poly(lactic-co-glycolic) acid (PLGA)-FF nanoparticles. By leveraging the properties of PLGA and lignin, this study aimed to augment the solubility, stability, and bioavailability of FF, thereby enabling dosage reduction and consequently diminishing the likelihood of resistance emergence and other limitations. Lignin-PLGA nanoparticles encapsulating FF were synthesized and characterized to assess their physicochemical properties, such as particle size, zeta potential, and drug loading efficiency. The release profile, antimicrobial efficacy, and cytotoxicity were evaluated. Comparative analyses with standard FF formulations were performed to ascertain the superior performance and potential benefits of the nanoparticle-based antimicrobials. Our findings indicate that the synthesized lignin-PLGA nanoparticles exhibited favorable drug delivery attributes, including a controlled and sustained release mechanism, significantly enhanced antimicrobial activity at reduced concentrations relative to free FF, with minimal cytotoxic effects. Importantly, the nanoparticle system inhibited bacterial biofilm formation, which is a key factor in the onset and spread of antimicrobial resistance. These findings underscore the potential of integrating biodegradable polymers with natural compounds to forge innovative pathways in drug delivery, addressing critical challenges in veterinary medicine.

Crafting Docetaxel-Loaded Albumin Nanoparticles Through a Novel Thermal-Driven Self-Assembly/Microfluidic Combination Technology: Formulation, Process Optimization, Stability, and Bioavailability

Background

The commercial docetaxel (DTX) formulation causes severe side effects due to polysorbate 80 and ethanol. Novel surfactant-free nanoparticle (NP) systems are needed to improve bioavailability and reduce side effects. However, controlling the particle size and stability of NPs and improving the batch-to-batch variation are the major challenges.

Methods

DTX-loaded bovine serum albumin nanoparticles (DTX-BSA-NPs) were prepared by a novel thermal-driven self-assembly/microfluidic technology. Single-factor analysis and orthogonal test were conducted to obtain the optimal formulation of DTX-BSA-NPs in terms of particle size, encapsulation efficiency (EE), and drug loading (DL). The effects of oil/water flow rate and pump pressure on the particle size, EE, and DL were investigated to optimize the preparation process of DTX-BSA-NPs. The drug release, physicochemical properties, stability, and pharmacokinetics of NPs were evaluated.

Results

The optimized DTX-BSA-NPs were uniform, with a particle size of 118.30 nm, EE of 89.04%, and DL of 8.27%. They showed a sustained release of 70% over 96 hours and an increased stability. There were some interactions between the drug and excipients in DTX-BSA-NPs. The half-life, mean residence time, and area under the curve (AUC) of DTX-BSA-NPs increased, but plasma clearance decreased when compared with DTX.

Conclusion

The thermal-driven self-assembly/microfluidic combination method effectively produces BSA-based NPs that improve the bioavailability and stability of DTX, offering a promising alternative to traditional formulations.

Photodynamic therapy of cationic and anionic BSA-curcumin nanoparticles on amastigotes of Leishmania braziliensis and Leishmania major and Leishmania amazonensis

Cutaneous leishmaniasis is a neglected disease prevalent in tropical countries, and conventional treatment can cause several serious side effects. Photodynamic therapy (PDT) can be considered a promising treatment alternative, as it is non-invasive therapy that has no side effects and uses accessible and low-cost substances, such as curcumin. This study evaluated the PDT response with cationic and anionic BSA nanoparticles encapsulated with curcumin in macrophages infected with L. braziliensis, L. major, and L. amazonensis. The nanoparticle system was characterized using a steady-state technique, scanning electron microscopy (SEM) study, and its biological activity was evaluated using macrophage cell lines infected with different Leishmania species. All spectroscopy measurements demonstrated that BSA curcumin (BSACur) has good photophysical properties, and confocal microscopy shows that macrophages and protozoa internalized the nanoparticles. The viability test demonstrated that at low concentrations, such as 0.1, 0.7, and 1.0 µmol. L-1, there was a decrease in cell viability after PDT application. Furthermore, a decrease in the number of parasites recovered was observed in the PDT groups. The results allowed us to conclude that curcumin loaded into BSA nanoparticles may have potential application in drug delivery systems for PDT protocols, demonstrating reduced cell viability at lower concentrations than free curcumin.

Effect of variables on exemestane-loaded albumin nanoparticles: statistical optimization and anti-cancer activity in MCF-7 cell lines

This research aimed to evaluate the effect of variables on exemestane-loaded bovine serum albumin nanoparticles (EXE-BSA NPs) to improve anti-breast cancer activity. EXE-BSA NPs were optimized using 32 factorial design, wherein the concentration of BSA (X1) and sonication time (X2) were independent variables and particle size (Y1) and %w/w entrapment efficiency (Y2) were dependent variables. The statistical optimization revealed a significant effect of BSA concentration on both variables, whereas sonication time affected only particle size. The optimized EXE-BSA NPs were spherical with 124.1 ± 2.62 nm particle size, 83.95 ± 1.06% w/w drug entrapment, and exhibited a biphasic release of 100% (w/w) drug over 72 h. The optimized formulation induced cytotoxicity in MCF-7 cell lines with an IC50 value of 21.46 µg/mL by MTT assay, almost half the free drug (54.87 µg/mL). Thus, statistically optimized EXE-BSA NPs were effective in MCF-7 cell lines and can be explored to treat estrogen receptor-positive breast cancer.

Old Antibiotics Can Learn New Ways: A Systematic Review of Florfenicol Use in Veterinary Medicine and Future Perspectives Using Nanotechnology

Florfenicol is a broad-spectrum bacteriostatic antibiotic used exclusively in veterinary medicine in order to treat the pathology of farm and aquatic animals. It is a synthetic fluorinated analog of thiamphenicol and chloramphenicol that functions by inhibiting ribosomal activity, which disrupts bacterial protein synthesis and has shown over time a strong activity against Gram-positive and negative bacterial groups. Florfenicol was also reported to have anti-inflammatory activity through a marked reduction in immune cell proliferation and cytokine production. The need for improvement came from (1) the inappropriate use (to an important extent) of this antimicrobial, which led to serious concerns about florfenicol-related resistance genes, and (2) the fact that this antibiotic has a low water solubility making it difficult to formulate an aqueous solution in organic solvents, and applicable for different routes of administration. This review aims to synthesize the various applications of florfenicol in veterinary medicine, explore the potential use of nanotechnology to improve its effectiveness and analyze the advantages and limitations of such approaches. The review is based on data from scientific articles and systematic reviews identified in several databases.

Pharmaceutical characterization and pharmacokinetics of florfenicol-loaded alginate dried beads in rabbits

The pharmacokinetic variables of a new formulation of florfenicol included in dried bean of alginate (FADBs), its acceptance as in food medication, and its relationship with theoretical minimum inhibitory concentration (MIC) values of the main pathogens in rabbits, are presented. FADBs sought to mask the unpleasant taste of florfenicol while enhancing sustained absorption in a day to facilitate and optimise its dosage in this species. The entrapment efficiency was determined to be 94-98% and 73.56±3.26% of drug loading. No reduction in food consumption was detected, nor selectivity when choosing from their usual food. The elimination half-life was 1.23 to 2.4 h slower than the one previously reported in the literature. Possible flip-flop pharmacokinetics is proposed for FADBs in rabbits, thus complying better with the key pharmacokinetics/pharmacodynamics (PK/PD) ratio of t≥MIC. Also, if a MIC2.0 μg/mL is taken as the cut-off point for florfenicol in rabbits, then ad libitum intake of FADBs in their standard diet is sufficient to maintain plasma concentrations of florfenicol above this level during the whole dosing interval of 24 h. Additionally, FADBs are a low-cost and attractive drug delivery system for the oral controlled release of florfenicol in rabbits.

Clickable Albumin Nanoparticles for Pretargeted Drug Delivery toward PD-L1 Overexpressing Tumors in Combination Immunotherapy

We present a simple methodology to design a pretargeted drug delivery system, based on clickable anti-programmed death ligand 1 (anti-PD-L1) antibodies (Abs) and clickable bovine serum albumin (BSA) nanoparticles (NPs). Pretargeted drug delivery is based on the decoupling of a targeting moiety and a drug-delivering vector which can then react in vivo after separate injections. This may be key to achieve active targeting of drug-delivering NPs toward cancerous tissue. In pretargeted approaches, drug-delivering NPs were observed to accumulate in a higher amount in the targeted tissue due to shielding-related enhanced blood circulation and size-related enhanced tissue penetration. In this work, BSA NPs were produced using the solvent precipitation methodology that renders colloidally stable NPs, which were subsequently functionalized with a clickable moiety based on chlorosydnone (Cl-Syd). Those reactive groups are able to specifically react with dibenzocyclooctyne (DBCO) groups in a click-type fashion, reaching second-order reaction rate constants as high as 1.9 M^-1·s^-1, which makes this reaction highly suitable for in vivo applications. The presence of reactive Cl-Syd was demonstrated by reacting the functionalized NPs with a DBCO-modified sulfo-cyanine-5 dye. With this reaction, it was possible to infer the number of reactive moieties per NPs. Finally, and with the aim of demonstrating the suitability of this system to be used in pretargeted strategies, functionalized fluorescent NPs were used to label H358 cells with a clickable anti-PD-L1 Ab, applying the reaction between Cl-Syd and DBCO as corresponding clickable groups. The results of these experiments demonstrate the bio-orthogonality of the system to perform the reaction in vitro, in a period as short as 15 min.

Curcumin delivery by modified biosourced carbon-based nanoparticles

Aim: To prepare a novel hybrid system for the controlled release and delivery of curcumin (CUR). Methods: A method for the ultrasound-assisted fabrication of protein-modified nanosized graphene oxide-like carbon-based nanoparticles (CBNPs) was developed. After being modified with bovine serum albumin (BSA), CUR was loaded onto the synthesized hybrid (labeled CBNPs@BSA-CUR). The structure and properties of the synthesized nanoparticles were elucidated using transmission electron microscopy (TEM), atomic force microscopy (AFM), ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS) methods. Results: CBNPs@BSA-CUR showed pH sensitivity and were calculated as controlled CUR release behavior. The drug-free system exhibited good biocompatibility and was nontoxic. However, CBNPs@BSA-CUR showed acceptable antiproliferative ability against MCF-7 breast cancer cells. Conclusion: CBNPs@BSA-CUR could be considered a highly promising nontoxic nanocarrier for the delivery of CUR with good biosafety.

Nanodesigning of multifunctional quantum dots and nanoparticles for the treatment of fibrosarcoma

AIM

An effective, dual drug(DD) loaded nanocarrier system (nano particle(NP), quantum dots(QDs)) having two active substances was aimed to develop for the treatment of fibrosarcoma.

METHODS

Zinc oxide(ZnO) QDs were produced using zinc acetate dehydrate as a precursor, were incorporated with chitosan(Ch), and finally decorated with PEG-linked folic acid and were found to be effective after imatinib mesylate(IM) and dexketoprofen trometamol(DT) were loaded. Characterizations, invitro drug releases, cell toxicities, penetrations through cell lines and in-vivo animal tests of the prepared nanosystems were performed.

RESULTS

The size of hybrid nanoparticles were 168.6 ± 48.8nm, surface charge was -35.8 ± 0.26mV. The encapsulation efficiency was 75% for IM and 99% for DT. DD-functionalized QDChNPs and lyophilized functionalized QDChNPs in capsules slowed down tumor growth by up to 76.5 % and 88.7 %.

CONCLUSIONS

Our results demonstrate that developed hybrid nanoparticles are highly effective. This hybrid system gathers many of the advantages of nanotechnology into one form.

Facile synthesis of dendrimer like mesoporous silica nanoparticles to enhance targeted delivery of interleukin-22

Interleukin (IL)-22 is a multifunctional cytokine with a very short half-life that activates STAT3 and can elicit strong anti-inflammatory effects in the intestine but can induce inflammation in other sites. Several long-circulating IL-22 fusion proteins have been manufactured to date; however, those were associated with adverse effects in other organs limiting their utility for treating intestinal inflammation. Targeted delivery of IL-22 to the intestine could utilize its anti-inflammatory properties and overcome systemic toxicity. Therefore, this study aimed to synthesise large pore mesoporous silica nanoparticles (LPMSN), load recombinant (r)IL-22 in the LPMSN and test its bioactivity in the STAT3 reporter LS174T, wild type LS174T, Caco-2 intestinal epithelial cells, and healthy human colonic organoids. Our data showed one hundred percent loading capacity (w/w) of the synthesised LPMSN, which prolonged IL-22 induced STAT3 luciferase activities in LS174T and p-STAT3 immunofluorescence in Caco-2 cells. LPMSN also stabilized and increased the permeability of rIL-22 across Caco-2 monolayers. Moreover, LPMSN-IL-22 retained the functionality of the cytokine in human colonic organoids. Taken together, these data demonstrate the protection and effective delivery of IL-22 using bio-nanomaterials (LPMSN) that could enable targeted oral delivery of this IL-22.

Improved transdermal permeability of tanshinone IIA from cataplasms by loading onto nanocrystals and porous silica

Novel transdermal cataplasms have been designed to improve permeability of poorly soluble drugs by different pretreatments. Nanocrystal and porous silica solid dispersions were loaded with Tanshinone IIA and incorporated into a cross-linked hydrogel matrix of cataplasm. It was shown that the small particle size and improved dissolution would increase dermal bioavailability. The adhesion, rheological properties, drug release, skin permeation, skin deposition and in vivo skin absorption of the different formulations were investigated. In an in vitro experiment using mouse skin, cumulative amount of drug permeated within 24 h was 7.32 ± 0.98 μg/cm² from conventional cataplasm, 13.14 ± 0.70 μg/cm² from nanocrystal-loaded cataplasm and 11.40 ± 0.13 μg/cm² from porous silica solid dispersion-loaded cataplasm. In vitro dissolution profiles showed that drug release was 76.5% and 74.9% from two optimized cataplasms within 24 h, while conventional cataplasm was 55.0%. The cross-linking characteristics of the cataplasms were preserved after incorporation of different drug forms, while the elastic and viscous behaviors of the hydrogel layers increased. In vivo evaluation by CLSM showed the more favorable skin permeation for two optimized cataplasms. These findings suggest that applications of nanocrystal and porous silica systems on cataplasms enable effective transdermal delivery of poorly soluble drugs. The resulting drug delivery and rheological properties are desirable for transdermal application.AbbreviationAll the abbreviations that appear in this article are shown in Table 1.

Enhanced Bioavailability of Dihydrotanshinone I-Bovine Serum Albumin Nanoparticles for Stroke Therapy

Dihydrotanshinone I (DHT) is a natural component in Salvia miltiorrhiza and has been widely researched for its multiple bioactivities. However, poor solubility and biocompatibility of DHT limit its desirable application for clinical purposes. Herein, DHT was encapsulated with bovine serum albumin (BSA) to enhance bioavailability. Compared to free DHT, DHT-BSA NPs (nanoparticles) showed an improved solubility in normal saline and increased protection against hydrogen peroxide-induced oxidative damage in PC12 cells. In addition, DHT-BSA NPs administered by intravenous injection displayed a significant efficacy in the middle cerebral artery occlusion/reperfusion models, without any impact on the cerebral blood flow. In summary, DHT-BSA NPs show an enhanced bioavailability compared with free DHT and a successful penetration into the central nervous system for stroke therapy, demonstrating their application potential in cardio-cerebrovascular diseases.

The Anti-Tumor Effect and Underlying Apoptotic Mechanism of Ginsenoside Rk1 and Rg5 in Human Liver Cancer Cells

Ginsenoside Rk1 and Rg5 are minor ginseng saponins that have received more attention recently because of their high oral bioavailability. Each of them can effectively inhibit the survival and proliferation of human liver cancer cells, but the underlying mechanism remains largely unknown. Network pharmacology and bioinformatics analysis demonstrated that G-Rk1 and G-Rg5 yielded 142 potential targets, and shared 44 putative targets associated with hepatocellular carcinoma. Enrichment analysis of the overlapped genes showed that G-Rk1 and G-Rg5 may induce apoptosis of liver cancer cells through inhibition of mitogen-activated protein kinase (MAPK) and nuclear factor-kappa B (NF-κB) signal pathways. Methyl thiazolyl tetrazolium (MTT) assay was used to confirm the inhibition of cell viability with G-Rk1 or G-Rg5 in highly metastatic human cancer MHCC-97H cells. We evaluated the apoptosis of MHCC-97H cells by using flow cytometry and 4′,6-diamidino-2-phenylindole (DAPI) staining. The translocation of Bax/Bak led to the depolarization of mitochondrial membrane potential and release of cytochrome c and Smac. A sequential activation of caspase-9 and caspase-3 and the cleavage of poly(ADP-ribose) polymerase (PARP) were observed after that. The levels of anti-apoptotic proteins were decreased after treatment of G-Rk1 or G-Rg5 in MHCC-97H cells. Taken together, G-Rk1 and G-Rg5 promoted the endogenous apoptotic pathway in MHCC-97H cells by targeting and regulating some critical liver cancer related genes that are involved in the signal pathways associated with cell survival and proliferation.

Coamorphous System of Florfenicol-Oxymatrine for Improving the Solubility and Dissolution Rate of Florfenicol: Preparation, Characterization and Molecular Dynamics Simulation

Coamorphous system has proved to be an effective approach to improve the solubility of BCSⅡ drugs. Florfenicol (FF) is a widely used veterinary antibiotic but has poor aqueous solubility. Therefore, the coamorphous system of florfenicol and oxymatrine (OMT) formulated at 1:1 and 1:2 M ratios were prepared by using solvent evaporation, followed by a series of characterization in terms of PXRD, DSC, FTIR and Raman spectroscopy. It was found that FF and OMT are miscible according to Hansen solubility parameters. The molecular electrostatic potential (MEP) and radial distribution function (RDF) analysis demonstrated the possible hydrogen bond interaction in coamorphous system, which was confirmed by FTIR and Raman spectra. The coamorphous FF-OMT (1:1) maintained stability for 60 days at 25 °C/0% RH and 30 days at 40 °C/75% RH, which may be attributed to better molecular miscibility of FF and OMT and the strong hydrogen bond of O-H (FF)⋯O-N (OMT) and N-H (FF)⋯O-N (OMT). In addition, the apparent solubility and permeability, dissolution and intrinsic dissolution rate (IDR) of the acquired coamorphous solids were obviously increased compared with crystalline FF. In conclusion, a drug-drug coamorphous formulation can be applied to improve the solubility and dissolution of crystalline FF.

Potentials of nanotechnology in treatment of methicillin-resistant Staphylococcus aureus

Abuse of antibiotics has led to the emergence of drug-resistant pathogens. Methicillin-resistant Staphylococcus aureus (MRSA) was reported just two years after the clinical use of methicillin, which can cause severe infections with high morbidity and mortality in both community and hospital. The treatment of MRSA infection is greatly challenging since it has developed the resistance to almost all types of antibiotics. As such, it is of great significance and importance to develop novel therapeutic approaches. The fast development of nanotechnology provides a promising solution to this dilemma. Functional nanomaterials and nanoparticles can act either as drug carriers or as antibacterial agents for antibacterial therapy. Herein, we aim to provide a comprehensive understanding of the drug resistance mechanisms of MRSA and discuss the potential applications of some functionalized nanomaterials in anti-MRSA therapy. Also, the concerns and possible solutions for the nanomaterials-based anti-MRSA therapy are discussed.

Cisplatin-loaded albumin nanoparticle and study their internalization effect by using β-cyclodextrin

The present study with aim at enhancing the therapeutic and anti-cancer properties of cisplatin (CPT)-loaded bovine serum albumin (BSA) nanoparticles. The BSA nanoparticles containing CPT (CPT-BSANPs) were successfully prepared by the desolvation technique. The physicochemical characterization of the CPT-BSANPs were used by Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The particle size of CPT-BSANPs was found less than 200 nm with 75.02 ± 0.15% entrapment efficiency (EE), while zeta potential and PDI were -17.6 mV and 0.2, respectively. In vitro release behavior of the CPT from the carrier suggests that about 64% of the drug gets released after 48 hrs. The anti-cancer activities of the CPT-BSANPs were tested on MCF-7 cell lines. Our studies show that CPT-BSANPs nanoparticles showed specific targeting and enhanced cytotoxicity to MCF-7 cells when compared to the bare CPT. Thus results suggest that CPT-BSANPs fallowed caveolae-mediated endocytosis, it may become better option for intracellular delivery of anticancer drug.

Supramolecular self-assembled drug delivery system (SADDs) of vancomycin and tocopherol succinate as an antibacterial agent: in vitro, in silico and in vivo evaluations

In this study self-assembled drug delivery system (SADDs) composed of a hydrophobic d-α-tocopherol succinate (TS) and a hydrophilic vancomycin (VCM) were formulated, and its potential for enhancing the antibacterial activity of VCM against Staphylococcus aureus (SA) and Methicillin-resistant Staphylococcus aureus (MRSA) were explored. The SADDs were synthesized via supramolecular complexation, then characterized for in silico, in vitro and in vivo studies. In silico studies confirmed the self-assembly of VCM/TS into NPs. The size, surface charge and drug loading of the SADDs was ˂100 nm, -27 mV and 68%, respectively. The SADDs were non-hemolytic and biosafe. A sustained release of VCM from SADDs was noted, with 52.2% release after 48 hr. The in vitro antibacterial test showed a twofold decrease in Minimum inhibitory concentration (MIC) against SA and MRSA, and a significantly higher reduction in MRSA biofilms compared to bare VCM. Further, in silico studies confirmed strong and stable binding of TS to MRSA efflux pumps. The in vivo study using mice skin infection models showed a 9.5-fold reduction in bacterial load after treatment with SADDs, in comparison with bare VCM. These findings affirmed that VCM/TS NPs as a promising novel nano-delivery for treating bacterial infections.

Nanoantioxidant-Based Silica Particles as Flavonoid Carrier for Drug Delivery Applications

Nanosystems used in pharmaceutical formulations have shown promising results in enhancing the administration of drugs of difficult formulations. In particular, porous silica nanoparticles have demonstrated excellent properties for application in biological systems; however, there are still several challenges related to the development of more effective and biocompatible materials. An interesting approach to enhance these nanomaterials has been the development of nanoantioxidant carriers. In this work, a hybrid nanoantioxidant carrier based on porous silica nanoplatform with rosmarinic acid antioxidant immobilized on its surface were developed and characterized. Techniques such as dynamic light scattering (DLS), zeta potential, transmission electron microscopy (TEM), N2 adsorption-desorption measurements, differential scanning calorimetry (DSC), Fourier transform-infrared spectroscopy (FT-IR), and 2,2-diphenyl-1-picrylhydrazyl (DPPH●) assay were used to characterize and evaluate the antioxidant activity of nanocarriers. In addition, drug release profile was evaluated using two biorelevant media. The antioxidant activity of rosmarinic acid was maintained, suggesting the correct disposition of the moiety. Kinetic studies reveal that more morin is released in the simulated intestinal fluid than in the gastric one, while an anomalous non-Fickian release mechanism was observed. These results suggest a promising antioxidant nanocarrier suitable for future application in drug delivery.

Food Protein-Based Nanodelivery Systems for Hydrophobic and Poorly Soluble Compounds

The hydrophobicity of bioactive molecules poses a considerable problem in the pharmaceutical and the food industry. Using food-based protein nanocarriers is one promising way to deliver hydrophobic molecules. These types of protein possess many functional properties such as surface activity, water-binding capacity, emulsification, foaming, gelation, and antioxidant activity, as well as their incorporation in the food industry as ingredients. Besides, they express low toxicity, are less expensive compared to synthetic polymers, and are biodegradable. This review aims to give a brief overview of the recent studies done using food proteins as colloidal delivery systems for hydrophobic and poorly soluble compounds.

Controllable Fabrication of Inhomogeneous Microcapsules for Triggered Release by Osmotic Pressure

Inhomogeneous microcapsules that can encapsulate various cargo for controlled release triggered by osmotic shock are designed and reported. The microcapsules are fabricated using a microfluidic approach and the inhomogeneity of shell thickness in the microcapsules can be controlled by tuning the flow rate ratio of the middle phase to the inner phase. This study demonstrates the swelling of these inhomogeneous microcapsules begins at the thinnest part of shell and eventually leads to rupture at the weak spot with a low osmotic pressure. Systematic studies indicate the rupture fraction of these microcapsules increases with increasing inhomogeneity, while the rupture osmotic pressure decreases linearly with increasing inhomogeneity. The inhomogeneous microcapsules are demonstrated to be impermeable to small probe molecules, which enables long-term storage. Thus, these microcapsules can be used for long-term storage of enzymes, which can be controllably released through osmotic shock without impairing their biological activity. The study provides a new approach to design effective carriers to encapsulate biomolecules and release them on-demand upon applying osmotic shock.