The severity of basilar invagination and atlantoaxial dislocation correlates with sagittal joint inclination, coronal joint inclination, and craniocervical tilt: a description of new indexes for the craniovertebral junction

Controversies in the Management of Type II Odontoid Fractures

The management of type II odontoid fractures in the elderly is controversial, as these patients often have numerous medical comorbidities that increase the risks of surgery, but they may also fail to achieve fracture healing with nonsurgical management. Recent changes in technology and surgeon attitudes may influence the preferred approach to both surgical and nonsurgical treatments for many clinicians. While bony fracture healing remains the goal of management, a stable fibrous union is increasingly considered a satisfactory outcome. The optimal surgical approach remains debated, with some authors raising concerns about the risk of swallowing dysfunction being particularly problematic with odontoid screw placement in the elderly. The use of BMP-2 applied either anteriorly into the fracture site or posteriorly in the interlaminar space and placement of temporary posterior fixation to be removed upon demonstration of anterior bony healing are novel surgical techniques that are presently the subject of investigation. A clearer understanding of the currently available treatment options and the associated controversies may improve clinician decision-making and potentially better patient outcomes in the management of type II odontoid fractures for the growing geriatric population.

The role of clivus and atlanto-occipital lateral mass height in basilar invagination with or without atlas occipitalization

Basilar invagination (BI) is a common deformity. This study aimed to quantitatively evaluate the height of clivus and atlanto-occipital lateral mass (LM) in patients with BI with or without atlas occipitalization (AOZ). We evaluated 166 images of patients with BI and of controls. Seventy-one participants were control subjects (group A), 68 had BI with AOZ (group B), and 27 had BI without AOZ (group C). Parameters were defined and measured for comparisons across the groups. Multiple linear regression analysis was used to test the relationship between Chamberlain's line violation (CLV) and the clivus height ratio or atlanto-occipital LM height. Based on the degree of AOZ, the lateral masses in group B were classified as follows: segmentation, incomplete AOZ, complete AOZ. From groups A to C, there was a decreasing trend in the clivus height and clivus height ratio. There was a linear negative correlation between the clivus height ratio and CLV in the three groups. Generally, the atlanto-occipital LM height followed the order of group B < group C < group A. The atlanto-occipital LM height was included only in the equations of groups B. There were no cases of atlantoaxial dislocation (AAD) in group C. There was a decreasing trend in LM height from the segmentation type to the complete AOZ type in group B. BI can be divided into three categories: AOZ causes LM height loss; Clivus height loss; Both clivus and LM height loss. The clivus height ratio was found to play a decisive role in both controls and BI group, while the atlanto-occipital LM height loss caused by AOZ could be a secondary factor in patients with BI and AOZ. AOZ may be a necessary factor for AAD in patients with congenital BI. The degree of AOZ is associated with LM height in group B.

Sagittal slope angle of lateral atlantoaxial articulation is associated with the severity of basilar invagination with atlantoaxial dislocation and predicts reduction degree after surgery

OBJECTIVE

To investigate (1) lateral atlantoaxial articulation (LAA) morphology in patients with basilar invagination (BI) with atlantoaxial dislocation (AAD) and healthy individuals and its relationship with the severity of dislocation and (2) the effect of the LAA morphology on reduction degree (RD) after surgery.

METHODS

In this retrospective propensity score matching case-control study, imaging and baseline data of 62 patients with BI and AAD from 2011 to 2022 were collected. Six hundred thirteen  participants without occipitocervical junctional deformity served as controls. Logistic regression and receiver operating characteristic (ROC) curve were used for analysis.

RESULTS

The age, BMI and sex did not differ significantly between the two groups after propensity score matching. Sagittal slope angle (SSA) and coronal slope angle (CSA) was lower and greater, respectively, in the patient group than in the control group. A negative SSA value usually indicates anteverted LAA. Regression analysis revealed a significant negative correlation between SSA and severity of dislocation. However, no relationship was found between CSA and the severity of dislocation. The multivariate logistic regression analysis revealed that minimum-SSA emerged as an independent predictor of satisfactory reduction (RD ≥ 90%). The ROC curve demonstrated an area under the curve of 0.844, with a cut-off value set at -40.2.

CONCLUSION

SSA in patients group was significantly smaller and more asymmetric than that in the control group. Dislocation severity was related to SSA but not to CSA. Minimum-SSA can be used as a predictor of horizontal RD after surgery.

Unilateral high-riding vertebral artery is associated with asymmetric morphological changes of the atlantoaxial joint: a novel risk factor for atlantoaxial osteoarthritis

PURPOSE

This study aimed to investigate the association between unilateral high-riding vertebral artery (HRVA) and morphological changes in the atlantoaxial joint (AAJ) and to determine whether unilateral HRVA is a risk factor for atlantoaxial osteoarthritis (AAOA).

METHODS

We conducted a retrospective analysis of 2496 patients admitted to our medical center between January 2020 and December 2022 who underwent CT imaging of the cervical spine. Two hundred and seventy-two patients with unilateral HRVA (HRVA group) were identified and a respective 2:1 age- and sex-matched control group without HRVA was built. Morphological parameters, including C2 lateral mass settlement (C2 LMS), C1/2 coronal inclination (C1/2 CI), lateral atlanto-dental interval (LADI), and C1/2 relative rotation angle (C1/2 RRA) were measured. The degree of AAOA was recorded. Risk factors associated with AAOA were identified using univariate and multivariable logistic regression analyses.

RESULTS

The study included 61.4% women, and the overall average age of the study population was 48.7 years. The morphological parameters (C2 LMS, C1/2 CI, and LADI) in AAJ were asymmetric between the HRVA and the non-HRVA sides in the HRVA group (p < 0.001). These differences in parameters (d-C2 LMS, d-C1/2 CI, and d-LADI) between the HRVA and the non-HRVA sides, and C1/2 RRA were significantly larger than those in the control group. Eighty-three of 816 patients (10.2%) with AAOA had larger values of d-C2 LMS, d-C1/2 CI, d-LADI, and C1/2 RRA compared with the patients without AAOA (p < 0.05). The multivariable logistic regression analysis indicated that unilateral HRVA [adjusted odds ratio (OR) = 2.6, 95% CI: 1.1-6.3, p = 0.029], age in the sixth decade or older (adjusted OR = 30.2, 95% CI: 16.1-56.9, p < 0.001), women (adjusted OR = 2.1, 95% CI: 1.0-5.6, P = 0.034) were independent risk factors for AAOA.

CONCLUSION

Unilateral HRVA was associated with asymmetric morphological changes of nonuniform settlement of C2 lateral mass, lateral slip of atlas, and atlantoaxial rotation displacement. Besides age ≥ 60 years and females, unilateral HRVA is an independent risk factor for AAOA.

The clinical validity of atlantoaxial joint inclination angle and reduction index for atlantoaxial dislocation

Objective

Atlantoaxial dislocation patients with neurological defects require surgery. Sometimes, release surgery is necessary for irreducible atlantoaxial dislocation to further achieve reduction. Whether release surgery is essential relies on the surgeon's experience and lacks objective reference criteria. To evaluate the value of atlantoaxial joint inclination angle (AAJI) in sagittal and coronal planes and reduction index (RI) in the surgical approach selection for atlantoaxial dislocation.

Methods

Retrospectively analyzed 87 cases (42 males and 45 females, 9-89 years) of atlantoaxial dislocation from January 2011 to November 2020. In addition, 40 individuals without atlantoaxial dislocation were selected as the control group. Imaging parameters were compared between the two groups. According to surgical methods, the experiment group was divided into two groups including Group A(release surgery group) and Group B (conventional operation group). The parameters were measured based on CT and x-ray. The relevant imaging parameters and clinical scores, including the AAJI in sagittal and coronal planes, the atlas-dens interval (ADI) before and after traction, the RI, and JOA scores were measured and analyzed.

Results

The sagittal and coronal atlantoaxial joint inclination angles(SAAJI and CAAJI) in the control group were 7.91 ± 0.42(L), 7.99 ± 0.39°(R), 12.92 ± 0.41°(L), 12.97 ± 0.37°(R), in A were 28.94 ± 1.46°(L), 28.57 ± 1.55°(R), 27.41 ± 1.29°(L), 27.84 ± 1.55°(R), and in B were 16.16 ± 0.95°(L), 16.80 ± 1.00°(R), 24.60 ± 0.84°(L), 24.92 ± 0.93°(R) respectively. Statistical analysis showed that there was a statistical difference in the SAAJI between the control group and the experiment group (P < 0.01), as well as between groups A and B (P < 0.01). The RI in groups A and B was 27.78 ± 1.46% and 48.60 ± 1.22% respectively, and there was also a significant difference between the two groups (P < 0.01). There was negative correlation between SAAJI and RI.

Conclusions

The SAAJI and RI can be used as objective imaging indexes to evaluate the reducibility of atlantoaxial dislocation. And these parameters could further guide the selection of surgery methods. When the RI is smaller than 48.60% and SAAJI is bigger than 28.94°, anterior release may be required.

Measurement of Deformity at the Craniovertebral Junction: Correlation of Triangular Area and Myelopathy

OBJECTIVE

Diseases of the craniovertebral junction (CVJ) are commonly associated with deformity, malalignment, and subsequent myelopathy. The misaligned CVJ might cause compression of neuronal tissues and subsequently clinical symptoms. The triangular area (TA), measured by magnetic resonance imaging/images (MRI/s), is a novel measurement for quantification of the severity of compression to the brain stem. This study aimed to assess the normal and pathological values of TA by a comparison of patients with CVJ disease to age- and sex-matched controls. Moreover, postoperative TAs were correlated with outcomes.

METHODS

Consecutive patients who underwent surgery for CVJ disease were included for comparison to an age- and sex-matched cohort of normal CVJ persons as controls. The demographics, perioperative information, and pre- and postoperative 2-year cervical MRIs were collected for analysis. Cervical TAs were measured and compared.

RESULTS

A total of 201 patients, all of whom had pre- or postoperative MRI, were analyzed. The TA of the CVJ deformity group was larger than the healthy control group (1.62 ± 0.57 cm2 vs. 1.01 ± 0.18 cm2, p < 0.001). Moreover, patients who had combined anterior odontoidectomy and posterior laminectomy with fixation had the greatest reduction in the TA (1.18 ± 0.58 cm2).

CONCLUSION

In CVJ deformity, the measurement of the cervical TA could indicate the severity of brain stem compression. After surgery, the TA had a varying degree of improvement, which could represent the efficacy of surgery.

Surgical treatment of a complex craniocervical malformation combined with posterior cranial fossa teratoma: a case report and literature review

Background

Basilar invagination (BI) with atlantoaxial dislocation (AAD) is not uncommon in patients with scoliosis, Klippel-Feil syndrome (KFS), and other bone deformities. Cases with combinations of the abovementioned dislocations and deformities with posterior cranial fossa teratoma are rare in the clinic and difficult to handle.

Case presentation

This case presents a 34-year-old woman diagnosed with atlantoaxial dislocation and posterior cranial fossa mass. After two surgeries, the posterior cranial teratoma was completely removed with satisfactory atlantoaxial reduction. The postoperative 1-year follow-up examination showed that the bone graft fusion was successful, without remaining significant dysfunction.

Conclusions

The surgical risk of irreducible atlantoaxial dislocation combined with posterior cranial fossa tumor is huge. Thus, it needs to be fully preoperatively evaluated and managed carefully in accordance with sound surgical principles.

Weak Ligaments and Sloping Joints: A New Hypothesis for Development of Congenital Atlantoaxial Dislocation and Basilar Invagination

OBJECTIVE

Developmental bony craniovertebral junction (CVJ) anomalies seem to have a genetic basis and also abnormal joint morphology causing atlantoaxial dislocation (AAD) and basilar invagination (BI).

METHODS

DNA extracted polymerase chain reaction single-stranded conformation polymorphism (SSCP) performed for mutation screening of FBN1 gene (n = 50 cases+ 50 age/sex-matched normal; total: 100). Samples with a deviated pattern of bands in SSCP were sequenced to detect the type of variation. Computed tomography (CT) scans of 100 patients (15-45 years old) compared with an equal number of age/sex-matched controls (21.9 ± 8.2 years). Joint parameters studied: sagittal joint inclination (SI), craniocervical tilt (CCT), coronal joint inclination (CI).

RESULTS

Thirty-nine samples (78%) showed sequence variants. Exon 25, 26, 27, and 28 showed variable patterns of DNA bands in SSCP, which on sequencing gives various types of DNA sequence variations in intronic region of the FBN1 gene in 14%, 14%, 6%, and 44% respectively. CT radiology:SI and CCT correlated with both BI and AAD (p < 0.01). The mean SI value in controls: 83.35° ± 8.65°, and in patients with BI and AAD:129° ± 24.05°. Mean CCT in controls: 60.2° ± 9.2°, and in patients with BI and AAD: 86.0° ± 18.1°. Mean CI in controls:110.3° ± 4.23°, and in cases: 125.15° ± 16.4°.

CONCLUSION

The study showed mutations in FBN1 gene (reported in Marfan syndrome). There is also an alteration of joint morphology, correlating with AAD and BI severity. Hence, we propose a double-hit hypothesis: the presence of weak ligaments (due to FB1 gene alterations) and abnormal joint morphology may contribute to AAD and BI.

Evaluation and Surgical Planning for Craniovertebral Junction Deformity

Craniovertebral junction (CVJ) deformity is a challenging pathology that can result in progressive deformity, myelopathy, severe neck pain, and functional disability, such as difficulty swallowing. Surgical management of CVJ deformity is complex for anatomical reasons; given the discreet relationships involved in the surrounding neurovascular structures and intricate biochemical issues, access to this region is relatively difficult. Evaluation of the reducibility, CVJ alignment, and direction of the mechanical compression may determine surgical strategy. If CVJ deformity is reducible, posterior in situ fixation may be a viable solution. If the deformity is rigid and the C1–2 facet is fixed, osteotomy may be necessary to make the C1–2 facet joint reducible. C1–2 facet release with vertical reduction technique could be useful, especially when the C1–2 facet joint is the primary pathology of CVJ kyphotic deformity or basilar invagination. The indications for transoral surgery are becoming as narrow as a treatment for CVJ deformity. In this article, we will discuss CVJ alignment and various strategies for the management of CVJ deformity and possible ways to prevent complications and improve surgical outcomes.

Classification of the facets of lateral atlantoaxial joints in patients with congenital atlantoaxial dislocation

PURPOSE

To investigate the morphological characteristics and para-positions of the facets of lateral atlantoaxial joints (FLAJs) in patients with congenital atlantoaxial dislocation (CAAD) and to propose a classification system for the FLAJs.

METHODS

A total of 93 cases of CAAD were included in this retrospective study. The obliquity and slippage of the FLAJs in the sagittal and coronal planes were measured and observed in the CT images of all of the cases. The obliquity and slippage of the FLAJs represented the morphological characteristics and the para-positions, respectively, and were used as classification parameters. Accordingly, a classification system for the FLAJs was established. We additionally investigated the correlation between the classifications of the FLAJs and various types of CAAD. The classifications of the FLAJs in 34 patients with irreducible AAD (IAAD) were also investigated.

RESULTS

One hundred eighty-six FLAJs in 93 patients were classified into 6 types (namely, A, B1, B2, C, D1, and D2) for obliquity and 3 types (namely, S₀, S₁, and S₂) for slippage. Among the 186 FLAJs, type B1 and type S₀ were the most common obliquity and slippage types, respectively. There were 11 combination types for obliquity and 5 combination types for slippage of bilateral FLAJ in 93 patients. Most of the patients (69.7%, 47/70) with anteroposterior AAD had accompanying slippage and anteversion of the FLAJ in the sagittal plane. Rotational AAD was found in 10 patients with asymmetrical slippage in both FLAJs in the sagittal plane. Lateral translational AAD was found in 6 patients with an S₁-type FLAJ in the coronal plane. In 5 patients with lateral angular AAD, FLAJs of types D1 and S₂ were observed on one side. Among the 34 patients with IAAD, 31 patients had both obliquity and slippage in the FLAJs on one or both sides.

CONCLUSION

The morphological characteristics and para-positions of the FLAJs on both sides largely determine the types of AAD in patients with CAAD. The types of obliquity and slippage of the FLAJ are related to the reducibility of AAD.

RESEARCH ON THE STRATEGY OF REDUCTION OPERATION OF BASILAR INVAGINATION COMBINED WITH ATLANTOAXIAL DISLOCATION

Background: The complicated basilar invagination and atlantoaxial dislocation (BI-AAD) can cause a variety of neurological symptoms. Active treatment should be given. The main method of surgical treatment is to relieve the compression of the ventral bone of the brain stem and to fix the unstable spinal segments for fusion. At present, more surgical methods choose modified posterior cervical reduction and internal fixation fusion. Objective: The clinician has preliminarily designed an internal occipital fixation system capable of restoring both horizontal and vertical AADs, and proposed a new compression and distraction reduction (CDR) technique. The feasibility and effectiveness of posterior AAD reduction surgery using CDR techniques for different types of patients were studied in this paper. Methods: First, according to the CT scan sequence images of the congenital BI-AAD patient’s cervical vertebra, the software Materialize Mimics 13.1 was imported to reconstruct 3D geometric model of cervical spine (C0-C7). Then the geometric topology model was carried out in Geomagic2012 software, and surrounding soft tissue was established using SpaceClaim 14.0. The 3D finite element model (FEM) of cervical vertebra for congenital BI-AAD patients was obtained by assigning material attributes, setting contacts and mesh in ANSYS 14.0. To simulate the physiological activities of the spine under two conditions of forward flexion and backward extension, preoperative verification was carried out with the maximum displacement parameter. According to the postoperative CT data of the patient, the position and degree of freedom (DOF) of the occipitocervical internal fixation system were determined. The FEM of the occipitocervical internal fixation system was established by dividing unit grid in ANSYS. Using multiple loading step of statics analysis method, the CDR technology of posterior AAD reduction surgery was simulated. When the atlantoaxial horizontal and vertical reductions were satisfactory, the displacement data were obtained and verified using the post-operative data. Results: The cervical spine (C0-C7) FEM of congenital BI-AAD patients was established. For some lateral atlantoaxial articulation abnormal ossification II, we simulated the CDR technique for the AAD reduction surgery and proposed using the vertical traction instead of vertical reduction. Conclusion: This study confirms the feasibility and effectiveness of posterior AAD reduction surgery using CDR techniques and proposes the different reduction optimization scheme for the patients with lateral atlantoaxial articulation abnormal ossification II of congenital BI-AAD. The results of this study provide a biomechanical theoretical basis for improving the reliability of simple posterior reduction surgery and optimizing the surgical treatment of BI-AAD.

Anatomical evaluation of the craniovertebral junction on cone-beam computed tomography images

INTRODUCTION

There are many craniometric measurements that are used in evaluating craniovertebral junction (CVJ) pathologies such as basilar invagination, atlantoaxial dislocation and platybasia. Therefore, it is important to determine the normal reference range of the craniometric measurements. This study aims to determine the morphometric reference values of the bony structures in the CVJ from cone-beam computed tomography (CBCT) images of a group of South Eastern Anatolian population.

MATERIALS AND METHODS

The CBCT images of 300 individuals were retrospectively evaluated. 14 parameters on midsagittal and 2 parameters on the coronal plane were studied. The data were statistically evaluated.

RESULTS

Measurement results were found as follows; the distances between odontoid process (OP) and McGregor line as 0.31 ± 3.22 mm, OP and Chamberlain line 1.06 ± 3.22 mm, OP and McRae line 5.30 ± 1.59 mm, OP and Fischgold digastric line 8.70 ± 4.12 mm, OP and Fischgold bimastoid line - 5.15 ± 4.86 mm, length of McRae line 35.58 ± 2.52 mm, atlantodental interval 1.28 ± 0.48 mm, posterior atlantodental interval 19.54 ± 2.24 mm, basion axial interval 4.01 ± 1.83 mm, basion dental interval 4.92 ± 1.77 mm, length of Modified Ranawat line 28.66 ± 2.38 mm, length of Redlund-Johnell line 35.11 ± 4.09 mm, clivus canal angle 157.62° ± 11.85°, Welcher basal angle 130.83° ± 6.29°, craniocervical tilt 126.98° ± 12.24° and Powers ratio as 0.72 ± 0.06.

CONCLUSION

In this study, the morphometric values were evaluated according to age and gender in individuals who did not have any radiologic anomalies. The normal reference ranges may be useful for researchers who are researching pathology in this region. It is recommended to conduct further studies with different populations to determine the normal reference range.

Cervicomedullary angle as an independent radiological predictor of postoperative neurological outcome in type A basilar invagination

To propose an independent radiological index to evaluate surgical outcomes of A type basilar invagination, a retrospective study was conducted to compare the clinical outcome between procedures 1 and 2 by applying intraoperative consistent traction and manual reduction. Moreover, the atlantodental interval (ADI), cervicomedullary angle (CMA), bilateral sagittal inclination of atlantoaxial joint (SIAA) were measured and compared to pre-operation. Postoperatively, only these patients undergoing procedure 2 achieved significant neurological improvement. The ADIs and the SIAAs decreased in both groups, these differences are statistically significant between pre- and post- operation. For postoperative CMAs, only these patients undergoing modified surgery gained significant improvement of angle with mean 141°. We concluded that the CMA or SIAA could be a radiological predictor to evaluate surgical outcome in BI, among which the CMA is a more independent and easily measurable predictor that is closely correlated with satisfactory neurological improvements. Moreover, procedure 2 with intraoperative resistant cranial traction and manual reduction can help us achieve a good CMA.

Delayed Instrumentation Following Removal of Cranio-Vertebral Junction Chordomas: A Technical Note

Objective  To investigate on the feasibility and safety of a new approach which consists of delaying instrumentation after destabilizing craniovertebral junction (CVJ) chordoma surgery, allowing proton beam radiotherapy to be performed in a metal-free tumoral cavity. Design  This is a retrospective series of a prospectively maintained database. Participants  Five consecutive patients operated on for a CVJ chordomas for which instrumentation after tumor resection was deferred to after radiotherapy treatment. Main Outcome Measures  The main outcome consisted of measurements of the following parameters: C0-C2 angle, atlanto-dens interval (ADI), condylar gap, and the position of the dens relative to McGregor's line and coronal inclination, performed at 3 different times for all patients: before tumor surgery (baseline), before instrumentation surgery, and after instrumentation surgery. Results  For all patients, CVJ parameters deteriorated during the delay period, but stayed within normal limits for most. Because of radiological instability, one patient necessitated instrumentation before receiving radiotherapy. All parameters except condylar gap were partially corrected after instrumentation. No new neurological symptom or evolving neck pain occurred during the delay period. Conclusion  Delayed instrumentation of CVJ chordomas can be a safe alternative that might lead to improved subsequent radiotherapeutical treatment. Patient's selection and close clinical and radiological follow-up are mandatory for the success of this approach.

Clinical Analysis of Radiologic Measurements in Patients with Basilar Invagination

OBJECTIVE

To investigate correlations between radiologic measurements and clinical outcomes in patients with basilar invagination (BI).

METHODS

The medical records and radiologic data of 46 patients (27 women) who had undergone posterior atlantoaxial fusion or occipitocervical fusion for BI from January 2010 to June 2018 were retrospectively analyzed. Patients under 15 years old or with a polytraumatic, tumorous, or infectious pathology were excluded. The modified Ranawat method (MRM) and the Redlund-Johnell method (RJM) were used to obtain radiographic measurements of basilar invagination preoperatively, subacute postoperatively, and at 3-month and last follow-up. Visual analogue scale, Neck Disability Index, and Japanese Orthopedic Association (JOA) scores were also assessed. Correlations between MRM and RJM measurements and clinical outcomes were evaluated.

RESULTS

Mean age of patients was 59.9 ± 16.5 years, mean body mass index was 23.5 ± 4.6 kg/m², and mean follow-up was 37.9 ± 23.8 months. Postoperative radiologic measurements increased about 36% of preoperative radiologic measurements. Subsidence at the C1-2 joint occurred in most patients at 3 months postoperatively, but clinical outcomes did not deteriorate. JOA scores were linearly correlated with percentage increases in both radiologic measurements subacute postoperatively (P < 0.05), but this significance was not maintained until the last follow-up. Occipital numbness and neuralgia were most common postoperative complications. One case of neurovascular injury and 3 cases of postoperative dysphagia occurred postoperatively.

CONCLUSIONS

The subacute postoperative neurological outcomes of BI patients are significantly related to the amount of vertical reduction.

Basilar Invagination and Atlantoaxial Dislocation: Reduction, Deformity Correction and Realignment Using the DCER (Distraction, Compression, Extension, and Reduction) Technique With Customized Instrumentation and Implants

Objective

The technique of distraction, compression, extension, and reduction (DCER) is effective to reduce, realign, and relieve cranio-spinal compression through posterior only approach.

Methods

Study included all patients with atlantoaxial dislocation and basilar invagination (BI) with occipitalized C1 arch. Study techniques included Nurick grading, computed tomography scan to study atlanto-dental interval, BI, hyper-lordosis, and neck tilt. Sagittal inclination (SI), coronal inclination (CI), cranio-cervical tilt, presence of pseudo-joints, and anomalous vertebral artery were also noted. Patients underwent DCER with/without joint remodeling or extra-articular distraction (EAD) based on the SI being <100°, 100°–160°, or >160° respectively. In cases with pseudo-joints, joint remodeling was performed in type I and EAD in type II. Customized ‘bullet shaped’ PSC spacers (n=124) and prototype of the universal craniovertebral junction reducer (UCVJR, n=36) were useful.

Results

A total of 148 patients with average age 27.25±17.43 years, ranging from 3 to 71 years (87 males) were operated. Nurick’s grading improved from 3.14±1.872 to 1.22±1.17 (p<0.0001). Fifty-two percent of total joints (n=154/296 joints) were either type I (19%)/type II (33%) pseudo-j oints. All traditional indices such as Chamberlein line, McRae line, atlanto-dental interval, and Ranawat line improved (p<at least 0.001). BI, SI, and CI values correlated with type of pseudo-joints (p<0.0001). Side of neck tilt correlated with the type of pseudo-joint (p<0.0001). Cervical hyperlordosis improved significantly (p<0.0001).

Conclusion

Occipito-C2 pseudo-joints are important in determining the severity of BI. Asymmetrical pseudo-joint causes coronal/neck tilt. Type of pseudo-joint can strategize by DCER. Customized instruments and implants make technique safe, effective and easier.

Change of Anatomical Location of the Internal Carotid Artery Relative to the Atlas with Congenital Occipitalization and the Relevant Clinical Implications

INTRODUCTION

The occipitalization of the atlas (OA) is always associated with multiplanar dislocation and olisthy of the C1 over C2 facets, which may change the anatomical relationship between the internal carotid artery (ICA) and the atlas. The purpose of this current study is to identify the location of the ICA relative to the anterior aspect of the atlas in patients with OA and define the clinical implications for screw placement.

METHODS

We retrospectively reviewed the computed tomography angiography data of 86 patients with OA and 86 control subjects. Several parameters were also measured to quantitatively evaluate the mutual relationship.

RESULTS

In the OA group, 25.6% of ICAs were located in area 3 and 74.4% in area 2, whereas the percentages were 57.4% and 42.6%, respectively, in the control group. There were 73 (42.4%) ICAs in which the shortest distance between the dorsal surface of the ICA and the ventral cortex of the atlas was less than 4 mm in the OA group and only 50 (29.1%) in the control group. The ideal angulation of C1 screw trajectory was about 5 degrees more medial in the OA group than that in the control group (P < 0.01).

CONCLUSIONS

The risk of ICA injury is much higher in OA patients than in non-OA patients during the C1 screw placement. A mean medial angulation about 20 degrees will permit a long and safe screw purchase, but should be individualized. We recommend careful preoperative computed tomography angiography evaluation in all patients before surgery.

Computed Tomography Imaging Study of Basilar Invagination and Atlantoaxial Dislocation

OBJECTIVE

We sought to analyze axis deformities and the biomechanics related to atlantoaxial dislocation (AAD) in patients with basilar invagination (BI).

METHODS

Seventy-six patients were retrospectively analyzed including 21 patients who had BI (group B), 32 patients with BI and AAD (group C), and 23 nondeformity control subjects (group A). Using 3-dimensional computed tomography imaging the distance from the tip of the dens above the Chamberlain line in the sagittal plane, atlantodental interval, sagittal inclination, coronal inclination, and craniocervical tilt, the height of the odontoid and ratio of the height to the odontoid basal width were measured in each patient. We statistically analyzed the resulting data for correlations among physiologic measurements and disease state.

RESULTS

The height of the odontoid process in groups A, B, and C was 13.38 ± 1.50 mm, 10.87 ± 1.48 mm, and 8.49 ± 2.49 mm, respectively. The ratio of height-to-basal width of the odontoid in groups A, B, and C was 1.32 ± 0.21, 0.91 ± 0.21, and 0.65 ± 0.17, respectively. The sagittal inclination in groups A, B, and C was 85.85 ± 4.55 degrees, 105.76 ± 10.72 degrees, and 123.48 ±12.43 degrees, and the coronal inclination was 108.95 ± 24.09 degrees, 105.40 ± 25.16 degrees, and 108.82 ± 21.41 degrees, respectively. The craniocervical tilt in groups A, B, and C was 60.31 ± 6.98 degrees, 84.53 ± 18.94 degrees, and 71.79 ± 11.69 degrees, respectively. The height of the odontoid, height-to-basal width, and sagittal inclination were significantly correlated with both BI and AAD (P < 0.001). Odontoid height and height-to-basal width ratio were significantly correlated with BI, AAD, and sagittal inclination (P < 0.001). Finally, craniocervical tilt was correlated only with the BI severity (P < 0.001).

CONCLUSION

This study confirms that deformities of the odontoid process and the lateral joint correlate with severity of BI, while deformity of the odontoid process may be a primary factor in AAD for patients with BI.

Role of dynamic computed tomography scans in patients with congenital craniovertebral junction malformations

AIM

To evaluate the role of dynamic computed tomography (CT) scan imaging in diagnosing craniovertebral junction (CVJ) instability in patients with congenital CVJ malformations.

METHODS

Patients with symptomatic congenital CVJ malformations who underwent posterior fossa decompression and had a preoperative dynamic CT scan in flexion and extended position were included in this study. Measurements of the following craniometrical parameters were taken in flexed and extended neck position: Atlanto-dental interval (ADI), distance of the odontoid tip to the Chamberlain's line, and the clivus-canal angle (CCA). Assessment of the facet joints congruence was also performed in both positions. Comparison of the values obtained in flexion and extension were compared using a paired Student's t-test.

RESULTS

A total of ten patients with a mean age of 37.9 years were included. In flexion imaging, the mean ADI was 1.76 mm, the mean CCA was 125.4° and the mean distance of the odontoid tip to the Chamberlain's line was + 9.62 mm. In extension, the mean ADI was 1.46 mm (P = 0.29), the mean CCA was 142.2° (P < 0.01) and the mean distance of the odontoid tip to the Chamberlain's line was + 7.11 mm (P < 0.05). Four patients (40%) had facetary subluxation demonstrated in dynamic imaging, two of them with mobile subluxation (both underwent CVJ fixation). The other two patients with a fixed subluxation were not initially fixed. One patient with atlantoaxial assimilation and C23 fusion without initial facet subluxation developed a latter CVJ instability diagnosed with a dynamic CT scan. Patients with basilar invagination had a lower CCA variation compared to the whole group.

CONCLUSION

Craniometrical parameters, as well as the visualization of the facets location, may change significantly according to the neck position. Dynamic imaging can provide additional useful information to the diagnosis of CVJ instability. Future studies addressing the relationship between craniometrical changes and neck position are necessary.

Revisiting the differences between irreducible and reducible atlantoaxial dislocation in the era of direct posterior approach and C1–2 joint manipulation

OBJECTIVE

The current management of atlantoaxial dislocation (AAD) focuses on the C1–2 joints, commonly approached through a posterior route. The distinction between reducible AAD (RAAD) and irreducible AAD (IrAAD) seems to be less important in modern times. The roles of preoperative traction and dynamic radiographs are questionable. This study evaluated whether differentiating between the 2 groups is important in today's era.

METHODS

Ninety-six consecutive patients with congenital AAD (33 RAAD and 63 IrAAD), who underwent surgery through a posterior approach alone, were studied. The preoperative and follow-up clinical statuses for both groups were studied and compared using Japanese Orthopaedic Association (JOA) scores. The radiological findings of the 2 groups were compared, and the intraoperative challenges described.

RESULTS

A poor preoperative JOA score (clinical status) was seen in one-fifth of patients with IrAAD, although the mean JOA score was nearly similar in the RAAD and IrAAD groups. There was significant improvement in follow-up JOA score in both groups. However, segmentation defects (such as an assimilated arch of the atlas and C2–3 fusion) and anomalous vertebral arteries were found significantly more often in cases of IrAAD compared with those of RAAD. Os odontoideum was commonly seen in the RAAD group. The C1–2 joints were acute in IrAAD compared with RAAD. Preoperative traction in IrAAD resulted in vertical distraction and improvement in clinical and respiratory status. Surgery for IrAAD required much more drilling and manipulation of the C1–2 joints while safeguarding the anomalous vertebral artery.

CONCLUSIONS

Bony and vascular anomalies were much more common in patients with IrAAD, which made surgery more challenging than it was in RAAD despite similar approaches. An irreducible dislocation seen on preoperative radiographs made surgeons aware of difficulties that were likely to be encountered and helped them to better plan the surgery. Distraction achieved through preoperative traction reaffirmed the feasibility of intraoperative reduction. This made the differentiation between the 2 groups and the use of preoperative traction equally important.

Redefining Congenital Atlantoaxial Dislocation: Objective Assessment in Each Plane Before and After Operation

BACKGROUND

The C1-C2 joint has multiple degrees of freedom of movement and C1-C2 dislocation (AAD) is often multiplanar. The existing methodology to assess the dislocation is limited to few planes. The object of this study is to redefine and objectively assess congenital AAD in each possible plane, before and after the operation.

METHODS

This study consisted of 95 patients of irreducible congenital AAD operated on with the posterior approach alone. Preoperative and postoperative computed tomography imaging was studied in the axial, coronal, and sagittal planes. The relationship of C1-C2 along with the C1-C2 joint inclination was studied in each plane. The extent and type of dislocation was objectively assessed in each plane (newer indices) and compared with follow-up imaging for correction. The preoperative and postoperative Japenese orthopaedics association scores were compared.

RESULTS

The commonest variety (61 patients) was a combination of anteroposterior (AP) and vertical C1-C2 dislocation. Five patients had predominant APnteroposterior, 6 vertical, 4 axial rotational, 9 lateral angular tilt, and 3 had lateral transalational. Seven patients had a combination of dislocation in AP, vertical, and rotational planes. AP dislocation was seen with sagittal inclination of C1-C2 joints and vertical dislocation with coronal inclination. Asymmetry in the joint's sagittal inclination added to a rotational component, whereas asymmetry in the coronal angulation caused lateral angular tilt. Pure rotational or lateral translation dislocation had near-normal C1-C2 orientation. Preoperative Japenese orthopaedics association score was worst in the lateral tilt and the lateral translation. Correction in all planes was achieved in all patients.

CONCLUSIONS

The objective assessment of C1-C2 dislocation and joints in each plane was to determine its management and help in achieving multiplanar correction.