Identification of matrix physicochemical properties required for renal epithelial cell tubulogenesis by using synthetic hydrogels

Decoupling shear stress and pressure effects in the biomechanics of autosomal dominant polycystic kidney disease using a perfused kidney-on-chip

Kidney tubular cells are submitted to two distinct mechanical forces generated by the urine flow: shear stress and hydrostatic pressure. In addition, the mechanical properties of the surrounding extracellular matrix modulate tubule deformation under constraints. These mechanical factors likely play a role in the pathophysiology of kidney as exemplified by autosomal dominant polycystic kidney disease, in which pressure, flow and matrix stiffness have been proposed to modulate the cystic dilation of tubules with PKD1 mutations. The lack of in vitro systems recapitulating the mechanical environment of kidney tubules impedes our ability to dissect the role of these mechanical factors. Here we describe a perfused kidney-on-chip with tunable extracellular matrix mechanical properties and hydrodynamic constraints, that allows a decoupling of shear stress and flow. We used this system to dissect how these mechanical cues affect Pkd1-/- tubule dilation. We investigated cell behavior for a flow shear stress of 1 dyn/cm², combined or not with a 10-mbar intraluminal pressure. Our results showed two distinct mechanisms leading to tubular dilation. For Pkd1-/- PCT cells (proximal tubule), overproliferation mechanically leads to tubular dilation of 1.5-2-fold in 5 days, regardless of the mechanical context. For mIMCD-3 cells (collecting duct), tube dilation was associated with a squamous cell morphology but not with overproliferation and was highly sensitive to extracellular matrix properties, with suppression of the dilation when switching extracellular matrix composition from 6 to 9 mg/ml collagen. Contrary to PCT, mIMCD-3 tube dilation was highly sensitive to the nature of hydrodynamic constraint. Surprisingly, flow alone suppressed Pkd1-/- mIMCD-3 tubule dilation observed in static conditions, while the addition of luminal pressure restored it. Our in vitro model emulating nephron geometrical and mechanical organization sheds light on the roles of mechanical constraints in ADPKD and demonstrates the importance of controlling intraluminal pressure in kidney tubule models. STATEMENT OF SIGNIFICANCE: In autosomal dominant polycystic kidney disease, the development of numerous renal cysts leads to renal failure, with no curative therapy available. The initial stage of cyst formation, local tubule dilation, remains poorly understood. Although mechanical cues may be decisive, there is a lack of biomimetic systems recapitulating them. Here, an innovative kidney-on-a-chip was designed to decouple different hydrodynamic cues. We observed disease-specific tube dilation, driven by distinct mechanisms based or not on proliferation, in proximal tubule or collecting duct cell lines. Strikingly in the latter case, dilation, highly dependent on mechanical conditions, was suppressed by flow but restored by luminal pressure. Our model highlights the role of mechanical constraints in ADPKD and the importance of pressure control in renal models.

Biomimetic basement membranes: advances in materials, preparation techniques, and applications in in vitro biological models

In vitro biological model technology has become a cornerstone of modern biological research, driving advancements in drug screening, physiological and pathological studies, and tissue implantation applications. The natural basement membrane (BM), a homogeneous structure, provides critical physical and biological support for tissues and organs. To replicate its function, researchers have developed biomimetic BMs using advanced fabrication technologies, which are increasingly applied to in vitro models. This review explores the materials, preparation techniques, and applications of biomimetic BMs across various biological models, highlighting their advantages and limitations. Additionally, it discusses recent progress in the field and identifies current challenges in achieving BM simulations that closely mimic native structures. Future directions and recommendations are provided to guide the development of high-performance biomimetic BM materials and their manufacturing processes.

The Importance of Effective Ligand Concentration to Direct Epithelial Cell Polarity in Dynamic Hydrogels

Epithelial cysts and organoids are multicellular hollow structures formed by correctly polarized epithelial cells. Important in steering these cysts from single cells is the dynamic regulation of extracellular matrix presented ligands, and matrix dynamics. Here, control over the effective ligand concentration is introduced, decoupled from bulk and local mechanical properties, in synthetic dynamic supramolecular hydrogels formed through noncovalent crosslinking of supramolecular fibers. Control over the effective ligand concentration is realized by 1) keeping the ligand concentration constant, but changing the concentration of nonfunctionalized molecules or by 2) varying the ligand concentration, while keeping the concentration of non-functionalized molecules constant. The results show that in 2D, the effective ligand concentration within the supramolecular fibers rather than gel stiffness (from 0.1 to 8 kPa) regulates epithelial polarity. In 3D, increasing the effective ligand concentration from 0.5 × 10-3 to 2 × 10-3 m strengthens the effect of increased gel stiffness from 0.1 to 2 kPa, to synergistically yield more correctly polarized cysts. Through integrin manipulation, it is shown that epithelial polarity is regulated by tension-based homeostasis between cells and matrix. The results reveal the effective ligand concentration as influential factor in regulating epithelial polarity and provide insights on engineering of synthetic biomaterials for cell and organoid culture.

Advancing Synthetic Hydrogels through Nature-Inspired Materials Chemistry

Synthetic extracellular matrix (ECM) mimics that can recapitulate the complex biochemical and mechanical nature of native tissues are needed for advanced models of development and disease. Biomedical research has heavily relied on the use of animal-derived biomaterials, which is now impeding their translational potential and convoluting the biological insights gleaned from in vitro tissue models. Natural hydrogels have long served as a convenient and effective cell culture tool, but advances in materials chemistry and fabrication techniques now present promising new avenues for creating xenogenic-free ECM substitutes appropriate for organotypic models and microphysiological systems. However, significant challenges remain in creating synthetic matrices that can approximate the structural sophistication, biochemical complexity, and dynamic functionality of native tissues. This review summarizes key properties of the native ECM, and discusses recent approaches used to systematically decouple and tune these properties in synthetic matrices. The importance of dynamic ECM mechanics, such as viscoelasticity and matrix plasticity, is also discussed, particularly within the context of organoid and engineered tissue matrices. Emerging design strategies to mimic these dynamic mechanical properties are reviewed, such as multi-network hydrogels, supramolecular chemistry, and hydrogels assembled from biological monomers.

Engineered 3D Hydrogel Matrices to Modulate Trophoblast Stem Cell-Derived Placental Organoid Phenotype

Placental organoid models are a promising platform to study human placental development and function. Organoid systems typically use naturally derived hydrogel extracellular matrices (ECM), resulting in batch-to-batch variability that limits experimental reproducibility. As an alternative, synthetic ECM-mimicking hydrogel matrices offer greater consistency and control over environmental cues. Here, we generated trophoblast stem cell-derived placental organoids using poly(ethylene glycol) (PEG) hydrogels with tunable degradability and placenta-derived ECM cues to evaluate trophoblast differentiation relative to Matrigel and two-dimensional (2D) culture controls. Our data demonstrate that PEG hydrogels support trophoblast viability and metabolic function comparable to gold standard Matrigel. Additionally, phenotypic characterization via proteomic analysis revealed that PEG and Matrigel matrices drive syncytiotrophoblast and extravillous trophoblast-dominant placental organoid phenotypes, respectively. Further, three-dimensional (3D) environments promoted greater integrin expression and ECM production than 2D culture. This study demonstrates that engineered 3D culture environments can be used to reliably generate placental organoids and guide trophoblast differentiation.

Engineered Synthetic Matrices for Human Intestinal Organoid Culture and Therapeutic Delivery

Human intestinal organoids (HIOs) derived from pluripotent stem cells or adult stem cell biopsies represent a powerful platform to study human development, drug testing, and disease modeling in vitro, and serve as a cell source for tissue regeneration and therapeutic advances in vivo. Synthetic hydrogels can be engineered to serve as analogs of the extracellular matrix to support HIO growth and differentiation. These hydrogels allow for tuning the mechanical and biochemical properties of the matrix, offering an advantage over biologically derived hydrogels such as Matrigel. Human intestinal organoids have been used for repopulating transplantable intestinal grafts and for in vivo delivery to an injured intestinal site. The use of synthetic hydrogels for in vitro culture and for in vivo delivery is expected to significantly increase the relevance of human intestinal organoids for drug screening, disease modeling, and therapeutic applications.

Controlling placental spheroid growth and phenotype using engineered synthetic hydrogel matrices

The human placenta is a complex organ comprised of multiple trophoblast subtypes, and inadequate models to study the human placenta in vitro limit the current understanding of human placental behavior and development. Common in vitro placental models rely on two-dimensional culture of cell lines and primary cells, which do not replicate the native tissue microenvironment, or poorly defined three-dimensional hydrogel matrices such as Matrigel™ that provide limited environmental control and suffer from high batch-to-batch variability. Here, we employ a highly defined, synthetic poly(ethylene glycol)-based hydrogel system with tunable degradability and presentation of extracellular matrix-derived adhesive ligands native to the placenta microenvironment to generate placental spheroids. We evaluate the capacity of a hydrogel library to support the viability, function, and phenotypic protein expression of three human trophoblast cell lines modeling varied trophoblast phenotypes and find that degradable synthetic hydrogels support the greatest degree of placental spheroid viability, proliferation, and function relative to standard Matrigel controls. Finally, we show that trophoblast culture conditions modulate cell functional phenotype as measured by proteomics analysis and functional secretion assays. Engineering precise control of placental spheroid development in vitro may provide an important new tool for the study of early placental behavior and development.

Role of extracellular matrix components and structure in new renal models in vitro

The extracellular matrix (ECM), a complex set of fibrillar proteins and proteoglycans, supports the renal parenchyma and provides biomechanical and biochemical cues critical for spatial-temporal patterning of cell development and acquisition of specialized functions. As in vitro models progress towards biomimicry, more attention is paid to reproducing ECM-mediated stimuli. ECM's role in in vitro models of renal function and disease used to investigate kidney injury and regeneration is discussed. Availability, affordability, and lot-to-lot consistency are the main factors determining the selection of materials to recreate ECM in vitro. While simpler components can be synthesized in vitro, others must be isolated from animal or human tissues, either as single isolated components or as complex mixtures, such as Matrigel or decellularized formulations. Synthetic polymeric materials with dynamic and instructive capacities are also being explored for cell mechanical support to overcome the issues with natural products. ECM components can be used as simple 2D coatings or complex 3D scaffolds combining natural and synthetic materials. The goal is to recreate the biochemical signals provided by glycosaminoglycans and other signaling molecules, together with the stiffness, elasticity, segmentation, and dimensionality of the original kidney tissue, to support the specialized functions of glomerular, tubular, and vascular compartments. ECM mimicking also plays a central role in recent developments aiming to reproduce renal tissue in vitro or even in therapeutical strategies to regenerate renal function. Bioprinting of renal tubules, recellularization of kidney ECM scaffolds, and development of kidney organoids are examples. Future solutions will probably combine these technologies.

Mimicking the Natural Basement Membrane for Advanced Tissue Engineering

Advancements in the field of tissue engineering have led to the elucidation of physical and chemical characteristics of physiological basement membranes (BM) as specialized forms of the extracellular matrix. Efforts to recapitulate the intricate structure and biological composition of the BM have encountered various advancements due to its impact on cell fate, function, and regulation. More attention has been paid to synthesizing biocompatible and biofunctional fibrillar scaffolds that closely mimic the natural BM. Specific modifications in biomimetic BM have paved the way for the development of in vitro models like alveolar-capillary barrier, airway models, skin, blood-brain barrier, kidney barrier, and metastatic models, which can be used for personalized drug screening, understanding physiological and pathological pathways, and tissue implants. In this Review, we focus on the structure, composition, and functions of in vivo BM and the ongoing efforts to mimic it synthetically. Light has been shed on the advantages and limitations of various forms of biomimetic BM scaffolds including porous polymeric membranes, hydrogels, and electrospun membranes This Review further elaborates and justifies the significance of BM mimics in tissue engineering, in particular in the development of in vitro organ model systems.

Programming hydrogels to probe spatiotemporal cell biology

The recapitulation of complex microenvironments that regulate cell behavior during development, disease, and wound healing is key to understanding fundamental biological processes. In vitro, multicellular morphogenesis, organoid maturation, and disease modeling have traditionally been studied using either non-physiological 2D substrates or 3D biological matrices, neither of which replicate the spatiotemporal biochemical and biophysical complexity of biology. Here, we provide a guided overview of the recent advances in the programming of synthetic hydrogels that offer precise control over the spatiotemporal properties within cellular microenvironments, such as advances in the control of cell-driven remodeling, bioprinting, or user-defined manipulation of properties (e.g., via light irradiation).

Synthetic Matrix Scaffolds Engineer the In Vivo Tumor Immune Microenvironment for Immunotherapy Screening

Immunotherapy has emerged as one of the most powerful anti-cancer therapies but is stymied by the limits of existing preclinical models with respect to disease latency and reproducibility. Additionally, the influence of differing immune microenvironments within tumors observed clinically and associated with immunotherapeutic resistance cannot be tuned to facilitate drug testing workflows without changing model system or laborious genetic approaches. To address this testing platform gap in the immune oncology drug development pipeline, the authors deploy engineered biomaterials as scaffolds to increase tumor formation rate, decrease disease latency, and diminish variability of immune infiltrates into tumors formed from murine mammary carcinoma cell lines implanted into syngeneic mice. By altering synthetic gel formulations that reshape infiltrating immune cells within the tumor, responsiveness of the same tumor model to varying classes of cancer immunotherapies, including in situ vaccination with a molecular adjuvant and immune checkpoint blockade, diverge. These results demonstrate the significant role the local immune microenvironment plays in immunotherapeutic response. These engineered tumor immune microenvironments therefore improve upon the limitations of current breast tumor models used for immune oncology drug screening to enable immunotherapeutic testing relevant to the variability in tumor immune microenvironments underlying immunotherapeutic resistance seen in human patients.

The Vanderbilt O'Brien Kidney Center

The Vanderbilt O'Brien Kidney Center (VOKC) is one of the eight National Institutes of Health P30-funded centers in the United States. The mission of these core-based centers is to provide technical and conceptual support to enhance and facilitate research in the field of kidney diseases. The goal of the VOKC is to provide support to understand mechanisms and identify potential therapies for acute and chronic kidney disease. The services provided by the VOKC are meant to help the scientific community to have the right support and tools as well as to select the right animal model, statistical analysis, and clinical study design to perform innovative research and translate discoveries into personalized care to prevent, diagnose, and cure kidney disease. To achieve these goals, the VOKC has in place a program to foster collaborative investigation into critical questions of kidney disease, to personalize diagnosis and treatment of kidney disease, and to disseminate information about kidney disease and the benefits of VOKC services and research. The VOKC is complemented by state-of-the-art cores and an education and outreach program whose goals are to provide an educational platform to enhance the study of kidney disease, to publicize information about services available through the VOKC, and to provide information about kidney disease to patients and other interested members of the community. In this review, we highlight the major services and contributions of the VOKC.

Extracellular Matrix Production by Mesenchymal Stromal Cells in Hydrogels Facilitates Cell Spreading and Is Inhibited by FGF-2

In native tissues, the interaction between cells and the surrounding extracellular matrix (ECM) is reciprocal, as cells not only receive signals from the ECM but also actively remodel it through secretion of cell-derived ECM. However, very little is known about the reciprocal interaction between cells and their secreted ECM within synthetic biomaterials that mimic the ECM for use in engineering of tissues for regenerative medicine or as tissue models. Here, poly(ethylene glycol) (PEG) hydrogels with fully defined biomaterial properties are used to investigate the emerging role of cell-derived ECM on culture outcomes. It is shown that human mesenchymal stromal cells (MSCs) secrete ECM proteins into the pericellular space early after encapsulation and that, even in the absence of material-presented cell adhesion motifs, cell-derived fibronectin enables cell spreading. Then, it is investigated how different culture conditions influence MSC ECM expression in hydrogels. Most strikingly, it is found by RNA sequencing that the fibroblast growth factor 2 (FGF-2) changes ECM gene expression and, in particular, decreases the expression of structural ECM components including fibrillar collagens. In summary, this work shows that cell-derived ECM is a guiding cue in 3D hydrogels and that FGF-2 is a potentially important ECM regulator within bioengineered cell and tissue systems.