Solid lipid nanoparticles: a promising tool for insulin delivery

INTRODUCTION

Insulin plays a critical role in metabolism modulation including carbohydrate, lipid, and protein metabolism. There is room to improve insulin delivery but optimizing the best carrier remains challenging. Traditional and conventional approaches for insulin delivery do not emulate the normal fate of insulin release in the body. Despite extensive research attempts to overcome this and other challenges, the goal of achieving optimal insulin delivery that emulates the natural system remains unresolved.

AREAS COVERED

Solid Lipid Nanoparticles (SLNs) may provide a solution, because they are nontoxic, biocompatible, and straightforward to formulate thus providing a promising platform for achieving targeted and controlled delivery of various therapeutic agents. This review aims to provide an overview on the suitability and application of SLNs for insulin delivery. A special emphasis is placed on the biopharmaceutical aspects of insulin loaded SLNs which have not been explored in detail to date.

EXPERT OPINION

SLNs have proven to be safe and versatile drug delivery systems suitable for insulin delivery and capable of improving the efficacy and pharmacokinetic profile of encapsulated insulin. There is still some work to be done to fully explore SLNs' true potential as drug delivery and specifically insulin delivery vehicles suitable for clinical use.

Efficient Delivery of Hydrophilic Small Molecules to Retinal Cell Lines Using Gel Core-Containing Solid Lipid Nanoparticles

In this study, we developed a novel solid lipid nanoparticle (SLN) formulation for drug delivery of small hydrophilic cargos to the retina. The new formulation, based on a gel core and composite shell, allowed up to two-fold increase in the encapsulation efficiency. The type of hydrophobic polyester used in the composite shell mixture affected the particle surface charge, colloidal stability, and cell internalization profile. We validated SLNs as a drug delivery system by performing the encapsulation of a hydrophilic neuroprotective cyclic guanosine monophosphate analog, previously demonstrated to hold retinoprotective properties, and the best formulation resulted in particles with a size of ±250 nm, anionic charge > -20 mV, and an encapsulation efficiency of ±60%, criteria that are suitable for retinal delivery. In vitro studies using the ARPE-19 and 661W retinal cell lines revealed the relatively low toxicity of SLNs, even when a high particle concentration was used. More importantly, SLN could be taken up by the cells and the release of the hydrophilic cargo in the cytoplasm was visually demonstrated. These findings suggest that the newly developed SLN with a gel core and composite polymer/lipid shell holds all the characteristics suitable for the drug delivery of small hydrophilic active molecules into retinal cells.

Formulation, characterization and in vitro anti-leishmanial evaluation of amphotericin B loaded solid lipid nanoparticles coated with vitamin B12-stearic acid conjugate

Despite the advancement of new anti-leishmanials, amphotericin B (AmB) prevails as one of the most potent agent in the treatment of visceral leishmaniasis (VL), a neglected tropical disease affecting mostly poverty ridden and underdeveloped regions of the globe. Nonetheless, many patients display intolerance to parenteral AmB, notably at higher dosages. Also, conventional AmB presents an apparently poor absorption. Therefore, to improve AmB bioavailability and overcome multiple barriers for oral delivery of AmB, we fabricated a promising vitamin B₁₂-stearic acid (VBS) conjugate coated solid lipid nanoparticles (SLNs) encapsulated with AmB (VBS-AmB-SLNs) by a combination of double emulsion solvent evaporation and thermal sensitive hydrogel techniques. VBS-AmB-SLNs showed a particle size of 306.66 ± 3.35 nm with polydispersity index of 0.335 ± 0.08 while the encapsulation efficiency and drug loading was observed to be 97.99 ± 1.6% and 38.5 ± 5.6% respectively. In vitro drug release showed a biphasic release pattern and chemical stability of AmB was ensured against simulated gastrointestinal fluids. Cellular uptake studies confirmed complete internalization of the formulation. Anti-leishmanial evaluation against intramacrophage amastigotes showed an enhanced efficacy of 94% which was significantly (P < 0.01) higher than conventional AmB without showing any toxic effects on J774A.1 cells. VBS-AmB-SLNs could serve as a potential therapeutic strategy against VL.

Rational Design of Nanocarriers for Intracellular Protein Delivery

Protein/antibody therapeutics have exhibited the advantages of high specificity and activity even at an extremely low concentration compared to small molecule drugs. However, they are accompanied by unfavorable physicochemical properties such as fragile tertiary structure, large molecular size, and poor penetration of the membrane, and thus the clinical use of protein drugs is hindered by inefficient delivery of proteins into the host cells. To overcome the challenges associated with protein therapeutics and enhance their biopharmaceutical applications, various protein-loaded nanocarriers with desired functions, such as lipid nanocapsules, polymeric nanoparticles, inorganic nanoparticles, and peptides, are developed. In this review, the different strategies for intracellular delivery of proteins are comprehensively summarized. Their designed routes, mechanisms of action, and potential therapeutics in live cells or in vivo are discussed in detail. Furthermore, the perspective on the new generation of delivery systems toward the emerging area of protein-based therapeutics is presented as well.

Effects of Compositional Tailoring on Drug Delivery Behaviours of Silica Xerogel/Polymer Core-shell Composite Nanoparticles

Conventional core-shell polymer nanoparticles usually exhibit a rapid release rate with their release kinetics mainly adjusted through changing composition of the polymer shells, limiting their applications for prolonged drug delivery. As a solution to these problems, silica xerogel/polymer core-shell-structured composite nanoparticles have been proposed. Different with our previous work centring on studying process variables, we here focused on investigating the effects of key compositional variables on essential properties of the composite nanoparticles. The drug release profiles (in vitro) were well interpreted by the Baker and Lonsdale model on a predicted two-stage basis. The first stage (<1 day) was well controlled from 18.6% to 45.9%; the second stage (1-14 days) was tailored in a range from 28.7 to 58.2% by changing the composition of the silica xerogel cores and polymeric shells. A substantial achievement was reducing the release rate by more than 40 times compared with that of conventional polymer nanoparticles by virtue of the silica xerogel cores. A semi-empirical model was also established in the first attempt to describe the effects of polymer concentration and drug loading capacity on the size of the composite nanoparticles. All these results indicated that the composite nanoparticles are promising candidates for prolonged drug delivery applications.

Nanocarrier fabrication and macromolecule drug delivery: challenges and opportunities

Macromolecules (proteins/peptides) have the potential for the development of new therapeutics. Due to their specific mechanism of action, macromolecules can be administered at relatively low doses compared with small-molecule drugs. Unfortunately, the therapeutic potential and clinical application of macromolecules is hampered by various obstacles including their large size, short in vivo half-life, phagocytic clearance, poor membrane permeability and structural instability. These challenges have encouraged researchers to develop novel strategies for effective delivery of macromolecules. In this review, various routes of macromolecule administration (invasive/noninvasive) are discussed. The advantages/limitations of novel delivery systems and the potential role of nanotechnology for the delivery of macromolecules are elaborated. In addition, fabrication approaches to make nanoformulations in different shapes and sizes are also summarized.

Lipid-based nanocarriers for oral peptide delivery

This article is aimed to overview the lipid-based nanostructures designed so far for the oral administration of peptides and proteins, and to analyze the influence of their composition and physicochemical (particle size, zeta potential) and pharmaceutical (drug loading and release) properties, on their interaction with the gastro-intestinal environment, and the subsequent PK/PD profile of the associated drugs. The ultimate goal has been to highlight and comparatively analyze the key factors that may be determinant of the success of these nanocarriers for oral peptide delivery. The article ends with some prospects on the challenges to be addressed for the intended commercial success of these delivery vehicles.

Oral delivery of diabetes peptides - Comparing standard formulations incorporating functional excipients and nanotechnologies in the translational context

While some orally delivered diabetes peptides are moving to late development with standard formulations incorporating functional excipients, the demonstration of the value of nanotechnology in clinic is still at an early stage. The goal of this review is to compare these two drug delivery approaches from a physico-chemical and a biopharmaceutical standpoint in an attempt to define how nanotechnology-based products can be differentiated from standard oral dosage forms for oral bioavailability of diabetes peptides. Points to consider in a translational approach are outlined to seize the opportunities offered by a better understanding of both the intestinal barrier and of nano-carriers designed for oral delivery.

Methocel-Lipid Hybrid Nanocarrier for Efficient Oral Insulin Delivery

Even with the use of double-emulsion technique for preparation, the hydrophobic nature of solid lipid nanoparticles (SLNs) limits their encapsulation efficiency (EE%) for peptides such as insulin. In this study, we hypothesize that inclusion of Methocel into SLN to form Methocel-lipid hybrid nanocarriers (MLNs) will significantly enhance insulin EE% without compromising the various characteristics of SLN favorable for oral drug delivery. Our data show that incorporation of 2% wt/wt of Methocel A15C had doubled insulin EE% (around 40%) versus conventional SLN prepared using standard double emulsion technique. MLN significantly protected the entrapped insulin against chymotrypsin degradation at gastrointestinal pH. Using intestinal epithelial cells Caco2 as a model, it was shown that MLN could be extensively taken up by Caco2 cells while demonstrating low cytotoxicity. The results indicate that MLN have preserved the key advantages of SLN (biocompatibility, low cytotoxicity, good drug protection, and good interaction with cells) while overcoming their key limitation for efficient peptide entrapment. Based on this, MLN may serve as a promising nanocarrier for oral delivery of peptides.

In vitro scleral lutein distribution by cyclodextrin containing nanoemulsions

Lutein is a macular pigment that contributes to maintaining eye health. The development of lutein-laden nanocarriers for ocular delivery would have the advantages of user friendliness and cost-effectiveness. Nano-scaled vehicles such as cyclodextrin (CD) and nanoemulsion could overcome the barriers caused by the scleral structure. This study focused on the development of hybrid nanocarriers containing nanoemulsion and CD for scleral lutein accumulation. In the presence of the nanoemulsion, CD forms such as βCD and hydroxyethyl (HE) βCD increased the partition of lutein into the porcine sclera. A combination of nanoemulsion and 2% HEβCD enhanced lutein accumulation to 119±6 µg g(-1) h(-1), which was 9.2-fold higher than that with lutein suspension alone. We explored the dose effect of CD in nanoemulsion on scleral lutein and found that the scleral accumulation of lutein was enhanced by increasing the CD content. The novel nanoemulsion had 95% drug-loading efficiency and low cytotoxicity in retinal cells. The CD-modified nanoemulsion not only improved the stability and entrapment efficacy of lutein in the aqueous system but also enhanced scleral lutein accumulation. An increase in the partition coefficient of lutein in porcine sclera when using the CD-modified nanoemulsion was also confirmed.

VB12-coated Gel-Core-SLN containing insulin: Another way to improve oral absorption

To improve the oral absorption of insulin, a novel carrier of Vitamin B12 (VB12) gel core solid lipid nanopaticles (Gel-Core-SLN, GCSLN) was designed with a gel core, lipid matrix and VB12-coated surface. VB12-stearate was synthesized and characterized by infrared spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry (MS). Sol-gel conversion following ultrasonic heating and double emulsion technology were combined to implant the insulin-containing gel into solid lipid nanoparticles (SLN). The influence of the mode of administration, food, the amount of VB12-stearate and the particle size on the oral absorption of insulin incorporated in the VB12-GCSLN was investigated. The determined partition coefficient (LogP) of VB12-stearate in a dichloromethane (DCM)-water system was 3.4. This new structure of VB12-GCSLN had higher insulin encapsulation efficiency (EE) of 55.9%, a lower burst release of less than 10% in the first 2h. In vivo studies demonstrated that stronger absorption of insulin with a relative pharmacological availability (PA) of 9.31% compared with the normal insulin-loaded SLN and GCSLN and fairly stable blood glucose levels up to 12h were maintained without any sharp fluctuations. This study suggests that VB12-GCSLN containing insulin appears to be a promising nano carrier for oral delivery of biomacromolecules with relatively high pharmacological availability.

Recent developments in protein and peptide parenteral delivery approaches

Discovery of insulin in the early 1900s initiated the research and development to improve the means of therapeutic protein delivery in patients. In the past decade, great emphasis has been placed on bringing protein and peptide therapeutics to market. Despite tremendous efforts, parenteral delivery still remains the major mode of administration for protein and peptide therapeutics. Other routes such as oral, nasal, pulmonary and buccal are considered more opportunistic rather than routine application. Improving biological half-life, stability and therapeutic efficacy is central to protein and peptide delivery. Several approaches have been tried in the past to improve protein and peptide in vitro/in vivo stability and performance. Approaches may be broadly categorized as chemical modification and colloidal delivery systems. In this review we have discussed various chemical approaches such as PEGylation, hyperglycosylation, mannosylation, and colloidal carriers including microparticles, nanoparticles, liposomes, carbon nanotubes and micelles for improving protein and peptide delivery. Recent developments on in situ thermosensitive gel-based protein and peptide delivery have also been described. This review summarizes recent developments on some currently existing approaches to improve stability, bioavailability and bioactivity of peptide and protein therapeutics following parenteral administration.

Self-assembling nanoparticles for the release of bisphosphonates in the treatment of human cancers [WO2012042024]

The focus of this patent was to manipulate the pharmacokinetic profile of an amino-bisphosphonate (zoledronic acid, ZOL) to make it desirable for anti-tumor uses. This patent disclosed a unique drug loading strategy that was inspired by gene delivery vehicles based on similar materials (calcium phosphate, CaP). The promise of this drug delivery system (DDS) lies not only in a 44% in vivo inhibition of tumor growth compared with free drug, but also in the low toxicity of the drug which guarantees a dosage regimen with higher doses and longer course of treatment. Also, the disclosed DDS has the potential to be further upgraded. In this patent evaluation, the state of the art in the field of CaP-based drug carrier and the novelty of this invention will be discussed.

Nanotechnology as a promising strategy for alternative routes of insulin delivery

Since its discovery, insulin has been used as highly specific and effective therapeutic protein to treat type 1 diabetes and later was associated to oral antidiabetic agents in the treatment of type 2 diabetes. Generally, insulin is administered parenterally. Although this route is successful, it still has several limitations, such as discomfort, pain, lipodystrophy at the injection sites and peripheral hyperinsulinemia, which may be the cause of side effects and some complications. Thus, alternative routes of administration have been developed, namely, those based on nanotechnologies. Nanoparticles, made of synthetic or natural materials, have been shown to successfully overcome the inherent barriers for insulin stability, degradation, and uptake across the gastrointestinal tract and other mucosal membranes. This review describes some of the many attempts made to develop alternative and more convenient routes for insulin delivery.