Deep-learning reconstruction for ultra-low-dose lung CT: Volumetric measurement accuracy and reproducibility of artificial ground-glass nodules in a phantom study

Application of a pulmonary nodule detection program using AI technology to ultra-low-dose CT: differences in detection ability among various image reconstruction methods

PURPOSE

This study aimed to investigate the performance of an artificial intelligence (AI)-based lung nodule detection program in ultra-low-dose CT (ULDCT) imaging, with a focus on the influence of various image reconstruction methods on detection accuracy.

METHODS

A chest phantom embedded with artificial lung nodules (solid and ground-glass nodules [GGNs]; diameters: 12 mm, 8 mm, 5 mm, and 3 mm) was scanned using six combinations of tube currents (160 mA, 80 mA, and 10 mA) and voltages (120 kV and 80 kV) on a Canon Aquilion One CT scanner. Images were reconstructed using filtered back projection (FBP), hybrid iterative reconstruction (HIR), model-based iterative reconstruction (MBIR), and deep learning reconstruction (DLR). Nodule detection was performed using an AI-based lung nodule detection program, and performance metrics were analyzed across different reconstruction methods and radiation dose protocols.

RESULTS

At the lowest dose protocol (80 kV, 10 mA), FBP showed a 0% detection rate for all nodule sizes. HIR and DLR consistently achieved 100% detection rates for solid nodules ≥ 5 mm and GGNs ≥ 8 mm. No method detected 3 mm GGNs under any protocol. DLR demonstrated the highest detection rates, even under ultra-low-dose settings, while maintaining high image quality.

CONCLUSION

AI-based lung nodule detection in ULDCT is strongly dependent on the choice of image reconstruction method.

Potential of artificial intelligence for radiation dose reduction in computed tomography -A scoping review

INTRODUCTION

Artificial intelligence (AI) is now transforming medical imaging, with extensive ramifications for nearly every aspect of diagnostic imaging, including computed tomography (CT). This current work aims to review, evaluate, and summarise the role of AI in radiation dose optimisation across three fundamental domains in CT: patient positioning, scan range determination, and image reconstruction.

METHODS

A comprehensive scoping review of the literature was performed. Electronic databases including Scopus, Ovid, EBSCOhost and PubMed were searched between January 2018 and December 2024. Relevant articles were identified from their titles had their abstracts evaluated, and those deemed relevant had their full text reviewed. Extracted data from selected studies included the application of AI, radiation dose, anatomical part, and any relevant evaluation metrics based on the CT parameter in which AI is applied.

RESULTS

90 articles met the selection criteria. Included studies evaluated the performance of AI for dose optimisation through patient positioning, scan range determination, and reconstruction across various CT scans, including the abdomen, chest, head, neck, and pelvis, as well as CT angiography. A concise overview of the present state of AI in these three domains, emphasising benefits, limitations, and impact on the transformation of dose reduction in CT scanning, is provided.

CONCLUSIONS

AI methods can help minimise positioning offsets and over-scanning caused by manual errors and helped to overcome the limitation associated with low-dose CT settings through deep learning image reconstruction algorithms. Further clinical integration of AI will continue to allow for improvements in optimising CT scan protocols and radiation dose.

IMPLICATIONS FOR PRACTICE

This review underscores the significance of AI in optimizing radiation doses in CT imaging, focusing on three key areas: patient positioning, scan range determination, and image reconstruction.

Deep learning-based image domain reconstruction enhances image quality and pulmonary nodule detection in ultralow-dose CT with adaptive statistical iterative reconstruction-V

OBJECTIVES

To evaluate the image quality and lung nodule detectability of ultralow-dose CT (ULDCT) with adaptive statistical iterative reconstruction-V (ASiR-V) post-processed using a deep learning image reconstruction (DLIR)-based image domain compared to low-dose CT (LDCT) and ULDCT without DLIR.

MATERIALS AND METHODS

A total of 210 patients undergoing lung cancer screening underwent LDCT (mean ± SD, 0.81 ± 0.28 mSv) and ULDCT (0.17 ± 0.03 mSv) scans. ULDCT images were reconstructed with ASiR-V (ULDCT-ASiR-V) and post-processed using DLIR (ULDCT-DLIR). The quality of the three CT images was analyzed. Three radiologists detected and measured pulmonary nodules on all CT images, with LDCT results serving as references. Nodule conspicuity was assessed using a five-point Likert scale, followed by further statistical analyses.

RESULTS

A total of 463 nodules were detected using LDCT. The image noise of ULDCT-DLIR decreased by 60% compared to that of ULDCT-ASiR-V and was lower than that of LDCT (p < 0.001). The subjective image quality scores for ULDCT-DLIR (4.4 [4.1, 4.6]) were also higher than those for ULDCT-ASiR-V (3.6 [3.1, 3.9]) (p < 0.001). The overall nodule detection rates for ULDCT-ASiR-V and ULDCT-DLIR were 82.1% (380/463) and 87.0% (403/463), respectively (p < 0.001). The percentage difference between diameters > 1 mm was 2.9% (ULDCT-ASiR-V vs. LDCT) and 0.5% (ULDCT-DLIR vs. LDCT) (p = 0.009). Scores of nodule imaging sharpness on ULDCT-DLIR (4.0 ± 0.68) were significantly higher than those on ULDCT-ASiR-V (3.2 ± 0.50) (p < 0.001).

CONCLUSION

DLIR-based image domain improves image quality, nodule detection rate, nodule imaging sharpness, and nodule measurement accuracy of ASiR-V on ULDCT.

KEY POINTS

Question Deep learning post-processing is simple and cheap compared with raw data processing, but its performance is not clear on ultralow-dose CT. Findings Deep learning post-processing enhanced image quality and improved the nodule detection rate and accuracy of nodule measurement of ultralow-dose CT. Clinical relevance Deep learning post-processing improves the practicability of ultralow-dose CT and makes it possible for patients with less radiation exposure during lung cancer screening.

Imaging diagnostics of pulmonary ground-glass nodules: a narrative review with current status and future directions

Background and Objective

The incidence rate of lung cancer, which also has the highest mortality rates for both men and women worldwide, is increasing globally. Due to advancements in imaging technology and the growing inclination of individuals to undergo screening, the detection rate of ground-glass nodules (GGNs) has surged rapidly. Currently, artificial intelligence (AI) methods for data analysis and interpretation, image processing, illness diagnosis, and lesion prediction offer a novel perspective on the diagnosis of GGNs. This article aimed to examine how to detect malignant lesions as early as possible and improve clinical diagnostic and treatment decisions by identifying benign and malignant lesions using imaging data. It also aimed to describe the use of computed tomography (CT)-guided biopsies and highlight developments in AI techniques in this area.

Methods

We used PubMed, Elsevier ScienceDirect, Springer Database, and Google Scholar to search for information relevant to the article's topic. We gathered, examined, and interpreted relevant imaging resources from the Second Affiliated Hospital of Nanchang University's Imaging Center. Additionally, we used Adobe Illustrator 2020 to process all the figures.

Key Content and Findings

We examined the common signs of GGNs, elucidated the relationship between these signs and the identification of benign and malignant lesions, and then described the application of AI in image segmentation, automatic classification, and the invasiveness prediction of GGNs over the last three years, including its limitations and outlook. We also discussed the necessity of conducting biopsies of persistent pure GGNs.

Conclusions

A variety of imaging features can be combined to improve the diagnosis of benign and malignant GGNs. The use of CT-guided puncture biopsy to clarify the nature of lesions should be considered with caution. The development of new AI tools brings new possibilities and hope to improving the ability of imaging physicians to analyze GGN images and achieving accurate diagnosis.

Influence of Deep Learning Based Image Reconstruction on Quantitative Results of Coronary Artery Calcium Scoring

RATIONALE AND OBJECTIVES

To assess the impact of deep learning-based imaging reconstruction (DLIR) on quantitative results of coronary artery calcium scoring (CACS) and to evaluate the potential of DLIR for radiation dose reduction in CACS.

METHODS

For a retrospective cohort of 100 consecutive patients (mean age 62 ±10 years, 40% female), CACS scans were reconstructed with filtered back projection (FBP), adaptive statistical iterative reconstruction (ASiR-V in 30%, 60% and 90% strength) and DLIR in low, medium and high strength. CACS was quantified semi-automatically and compared between image reconstructions. In a phantom study, a cardiac calcification insert was scanned inside an anthropomorphic thorax phantom at standard dose, 50% dose and 25% dose. FBP reconstructions at standard dose served as the reference standard.

RESULTS

In the patient study, DLIR led to a mean underestimation of Agatston score by 3.5, 6.4 and 11.6 points at low, medium and high strength, respectively. This underestimation of Agatston score was less pronounced for DLIR than for ASiR-V. In the phantom study, quantitative CACS results increased with reduced radiation dose and decreased with increasing strength of DLIR. Medium strength DLIR reconstruction at 50% dose reduction and high strength DLIR reconstruction at 75% dose reduction resulted in quantitative CACS results that were comparable to FBP reconstructions at standard dose.

CONCLUSION

Compared to FBP as the historical reference standard, DLIR leads to an underestimation of CACS but this underestimation is more moderate than with ASiR-V. DLIR can offset the increase in image noise and calcium score at reduced dose and may thus allow for substantial radiation dose reductions in CACS studies.

Patient-derived PixelPrint phantoms for evaluating clinical imaging performance of a deep learning CT reconstruction algorithm

Objective. Deep learning reconstruction (DLR) algorithms exhibit object-dependent resolution and noise performance. Thus, traditional geometric CT phantoms cannot fully capture the clinical imaging performance of DLR. This study uses a patient-derived 3D-printed PixelPrint lung phantom to evaluate a commercial DLR algorithm across a wide range of radiation dose levels.Method. The lung phantom used in this study is based on a patient chest CT scan containing ground glass opacities and was fabricated using PixelPrint 3D-printing technology. The phantom was placed inside two different size extension rings to mimic a small- and medium-sized patient and was scanned on a conventional CT scanner at exposures between 0.5 and 20 mGy. Each scan was reconstructed using filtered back projection (FBP), iterative reconstruction, and DLR at five levels of denoising. Image noise, contrast to noise ratio (CNR), root mean squared error, structural similarity index (SSIM), and multi-scale SSIM (MS SSIM) were calculated for each image.Results.DLR demonstrated superior performance compared to FBP and iterative reconstruction for all measured metrics in both phantom sizes, with better performance for more aggressive denoising levels. DLR was estimated to reduce dose by 25%-83% in the small phantom and by 50%-83% in the medium phantom without decreasing image quality for any of the metrics measured in this study. These dose reduction estimates are more conservative compared to the estimates obtained when only considering noise and CNR.Conclusion. DLR has the capability of producing diagnostic image quality at up to 83% lower radiation dose, which can improve the clinical utility and viability of lower dose CT scans. Furthermore, the PixelPrint phantom used in this study offers an improved testing environment with more realistic tissue structures compared to traditional CT phantoms, allowing for structure-based image quality evaluation beyond noise and contrast-based assessments.

Improved image quality in CT pulmonary angiography using deep learning-based image reconstruction

We investigated the effect of deep learning-based image reconstruction (DLIR) compared to iterative reconstruction on image quality in CT pulmonary angiography (CTPA) for suspected pulmonary embolism (PE). For 220 patients with suspected PE, CTPA studies were reconstructed using filtered back projection (FBP), adaptive statistical iterative reconstruction (ASiR-V 30%, 60% and 90%) and DLIR (low, medium and high strength). Contrast-to-noise ratio (CNR) served as the primary parameter of objective image quality. Subgroup analyses were performed for normal weight, overweight and obese individuals. For patients with confirmed PE (n = 40), we further measured PE-specific CNR. Subjective image quality was assessed independently by two experienced radiologists. CNR was lowest for FBP and enhanced with increasing levels of ASiR-V and, even more with increasing strength of DLIR. High strength DLIR resulted in an additional improvement in CNR by 29-67% compared to ASiR-V 90% (p < 0.05). PE-specific CNR increased by 75% compared to ASiR-V 90% (p < 0.05). Subjective image quality was significantly higher for medium and high strength DLIR compared to all other image reconstructions (p < 0.05). In CT pulmonary angiography, DLIR significantly outperforms iterative reconstruction for increasing objective and subjective image quality. This may allow for further reductions in radiation exposure in suspected PE.

Patient-derived PixelPrint phantoms for evaluating clinical imaging performance of a deep learning CT reconstruction algorithm

Objective

Deep learning reconstruction (DLR) algorithms exhibit object-dependent resolution and noise performance. Thus, traditional geometric CT phantoms cannot fully capture the clinical imaging performance of DLR. This study uses a patient-derived 3D-printed PixelPrint lung phantom to evaluate a commercial DLR algorithm across a wide range of radiation dose levels.

Approach

The lung phantom used in this study is based on a patient chest CT scan containing ground glass opacities and was fabricated using PixelPrint 3D-printing technology. The phantom was placed inside two different sized extension rings to mimic a small and medium sized patient and was scanned on a conventional CT scanner at exposures between 0.5 and 20 mGy. Each scan was reconstructed using filtered back projection (FBP), iterative reconstruction, and DLR at five levels of denoising. Image noise, contrast to noise ratio (CNR), root mean squared error (RMSE), structural similarity index (SSIM), and multi-scale SSIM (MS SSIM) were calculated for each image.

Main Results

DLR demonstrated superior performance compared to FBP and iterative reconstruction for all measured metrics in both phantom sizes, with better performance for more aggressive denoising levels. DLR was estimated to reduce dose by 25-83% in the small phantom and by 50-83% in the medium phantom without decreasing image quality for any of the metrics measured in this study. These dose reduction estimates are more conservative compared to the estimates obtained when only considering noise and CNR with a non-anatomical physics phantom.

Significance

DLR has the capability of producing diagnostic image quality at up to 83% lower radiation dose which can improve the clinical utility and viability of lower dose CT scans. Furthermore, the PixelPrint phantom used in this study offers an improved testing environment with more realistic tissue structures compared to traditional CT phantoms, allowing for structure-based image quality evaluation beyond noise and contrast-based assessments.

Artificial Intelligence and Machine Learning in Lung Cancer Screening

Recent advances in artificial intelligence and machine learning (AI/ML) hold substantial promise to address some of the current challenges in lung cancer screening and improve health equity. This article reviews the status and future directions of AI/ML tools in the lung cancer screening workflow, focusing on determining screening eligibility, radiation dose reduction and image denoising for low-dose chest computed tomography (CT), lung nodule detection, lung nodule classification, and determining optimal screening intervals. AI/ML tools can assess for chronic diseases on CT, which creates opportunities to improve population health through opportunistic screening.

Artificial Intelligence in Lung Cancer Screening: The Future Is Now

Lung cancer has one of the worst morbidity and fatality rates of any malignant tumour. Most lung cancers are discovered in the middle and late stages of the disease, when treatment choices are limited, and patients' survival rate is low. The aim of lung cancer screening is the identification of lung malignancies in the early stage of the disease, when more options for effective treatments are available, to improve the patients' outcomes. The desire to improve the efficacy and efficiency of clinical care continues to drive multiple innovations into practice for better patient management, and in this context, artificial intelligence (AI) plays a key role. AI may have a role in each process of the lung cancer screening workflow. First, in the acquisition of low-dose computed tomography for screening programs, AI-based reconstruction allows a further dose reduction, while still maintaining an optimal image quality. AI can help the personalization of screening programs through risk stratification based on the collection and analysis of a huge amount of imaging and clinical data. A computer-aided detection (CAD) system provides automatic detection of potential lung nodules with high sensitivity, working as a concurrent or second reader and reducing the time needed for image interpretation. Once a nodule has been detected, it should be characterized as benign or malignant. Two AI-based approaches are available to perform this task: the first one is represented by automatic segmentation with a consequent assessment of the lesion size, volume, and densitometric features; the second consists of segmentation first, followed by radiomic features extraction to characterize the whole abnormalities providing the so-called "virtual biopsy". This narrative review aims to provide an overview of all possible AI applications in lung cancer screening.

Computed Tomography 2.0: New Detector Technology, AI, and Other Developments

ABSTRACT

Computed tomography (CT) dramatically improved the capabilities of diagnostic and interventional radiology. Starting in the early 1970s, this imaging modality is still evolving, although tremendous improvements in scan speed, volume coverage, spatial and soft tissue resolution, as well as dose reduction have been achieved. Tube current modulation, automated exposure control, anatomy-based tube voltage (kV) selection, advanced x-ray beam filtration, and iterative image reconstruction techniques improved image quality and decreased radiation exposure. Cardiac imaging triggered the demand for high temporal resolution, volume acquisition, and high pitch modes with electrocardiogram synchronization. Plaque imaging in cardiac CT as well as lung and bone imaging demand for high spatial resolution. Today, we see a transition of photon-counting detectors from experimental and research prototype setups into commercially available systems integrated in patient care. Moreover, with respect to CT technology and CT image formation, artificial intelligence is increasingly used in patient positioning, protocol adjustment, and image reconstruction, but also in image preprocessing or postprocessing. The aim of this article is to give an overview of the technical specifications of up-to-date available whole-body and dedicated CT systems, as well as hardware and software innovations for CT systems in the near future.

Deep Learning Image Reconstruction for CT: Technical Principles and Clinical Prospects

Filtered back projection (FBP) has been the standard CT image reconstruction method for 4 decades. A simple, fast, and reliable technique, FBP has delivered high-quality images in several clinical applications. However, with faster and more advanced CT scanners, FBP has become increasingly obsolete. Higher image noise and more artifacts are especially noticeable in lower-dose CT imaging using FBP. This performance gap was partly addressed by model-based iterative reconstruction (MBIR). Yet, its "plastic" image appearance and long reconstruction times have limited widespread application. Hybrid iterative reconstruction partially addressed these limitations by blending FBP with MBIR and is currently the state-of-the-art reconstruction technique. In the past 5 years, deep learning reconstruction (DLR) techniques have become increasingly popular. DLR uses artificial intelligence to reconstruct high-quality images from lower-dose CT faster than MBIR. However, the performance of DLR algorithms relies on the quality of data used for model training. Higher-quality training data will become available with photon-counting CT scanners. At the same time, spectral data would greatly benefit from the computational abilities of DLR. This review presents an overview of the principles, technical approaches, and clinical applications of DLR, including metal artifact reduction algorithms. In addition, emerging applications and prospects are discussed.