A novel ATP regeneration system using polyphosphate-AMP phosphotransferase and polyphosphate kinase

Synthetic NAD(P)(H) Cycle for ATP Regeneration

ATP is the energy currency of the cell and new methods for ATP regeneration will benefit a range of emerging biotechnology applications including synthetic cells. We designed and assembled a membraneless ATP-regenerating enzymatic cascade by exploiting the substrate specificities of selected NAD(P)(H)-dependent oxidoreductases combined with substrate-specific kinases. The enzymes in the NAD(P)(H) cycle were selected to avoid cross-reactions, and the cascade was driven by irreversible fuel oxidation. As a proof-of-concept, formate oxidation was chosen as the fueling reaction. ATP regeneration was accomplished via the phosphorylation of NADH to NADPH and the subsequent transfer of the phosphate to ADP by a reversible NAD⁺ kinase. The cascade was able to regenerate ATP at a high rate (up to 0.74 mmol/L/h) for hours, and >90% conversion of ADP to ATP using monophosphate was also demonstrated. The cascade was used to regenerate ATP for use in cell free protein synthesis reactions, and the ATP production rate was further enhanced when powered by the multistep oxidation of methanol. The NAD(P)(H) cycle provides a simple cascade for the in vitro regeneration of ATP without the need for a pH-gradient or costly phosphate donors.

Phosphorylation-Driven Production of d-Allulose from d-Glucose by Coupling with an ATP Regeneration System

d-Allulose is a desirable sucrose substitute with potential applications in food and health care. d-Allulose can be synthesized using d-glucose as a substrate through coupling glucose isomerase with d-allulose 3-epimerase (DAEase); however, the product yield is typically less than 20% at reaction equilibrium and thus limits its use in industrial applications. Here, a 3R-ketose phosphorylation pathway coupled with an adenosine triphosphate (ATP) regeneration system was developed for the efficient synthesis of d-allulose in Escherichia coli using d-glucose as a substrate. The l-rhamnulose kinase (RhaB) was used to break the inherent reaction equilibrium due to its substrate specificity, resulting in increases in d-allulose titer by 69.9% to 4.96 ± 0.49 g/L. By optimizing the whole cell transformation conditions and designing an ATP regeneration module, d-allulose production reached 17.62 ± 0.77 g/L from 30 g/L d-glucose with a final yield of 0.73 g/g without the addition of exogenous ATP. To evaluate the potential industrial application of this multienzyme cascade system, d-allulose was produced from cane molasses (124.16 ± 2.69 g/L glucose equivalent) with a final d-allulose titer of 62.60 ± 3.76 g/L. The present study provides a practical enzymatic approach for the economical synthesis of d-allulose.

One-pot synthesis of 2,5-diketopiperazine with high titer and versatility using adenylation enzyme

2,5-Diketopiperazine (DKP) is a cyclic peptide composed of two amino acids and has been recently reported to exhibit various biological activities. DKPs have been synthesized using various methods. In chemical synthesis, a multi-step reaction requiring purification and racemization is problematic. Although enzymatic synthesis can overcome these problems, there has been no example of a general-purpose synthesis of DKPs with high titers. Therefore, we propose a chemoenzymatic method that can synthesize DKPs in a general-purpose manner with high efficiency under mild conditions. The adenylation domain of tyrocidine synthetase A (TycA-A) catalyzes the adenylation reaction of amino acids, and various amides can be synthesized by a nucleophilic substitution reaction with any amine. On the other hand, DKPs can be produced via intramolecular cyclization reactions from dipeptide esters. Based on these observations, we expected a one-pot synthesis of DKPs via dipeptide ester synthesis by TycA-A and cyclization reactions. This method enabled the synthesis of more than 128 types of DKPs without racemization. Importantly, the intramolecular cyclization reaction proceeded largely depending on the pH. In particular, the cyclization reaction proceeded well in the pH range of 6.5-9.5. Based on these results, we constructed a bioreactor with pH-stat for purified enzyme reaction; cyclo(L-Trp-L-Pro) was produced at 4.07 mM by controlling the reaction pH over time using this reactor. The DKPs obtained using this method will provide deeper insights into their structures and functions in future studies. KEY POINTS: • Adenylation enzyme enabled one-pot synthesis of arbitrary 2,5-diketopiperazine. • Little or no racemization occurred during 2,5-diketopiperazine synthesis. • Bioreactor with pH-stat for purified enzymes improved the reaction rate.

Comparative Genome Analysis of the Genus Thiothrix Involving Three Novel Species, Thiothrix subterranea sp. nov. Ku-5, Thiothrix litoralis sp. nov. AS and "Candidatus Thiothrix anitrata" sp. nov. A52, Revealed the Conservation of the Pathways of Dissimilatory Sulfur Metabolism and Variations in the Genetic Inventory for Nitrogen Metabolism and Autotrophic Carbon Fixation

Two strains of filamentous, colorless sulfur bacteria were isolated from bacterial fouling in the outflow of hydrogen sulfide-containing waters from a coal mine (Thiothrix sp. Ku-5) and on the seashore of the White Sea (Thiothrix sp. AS). Metagenome-assembled genome (MAG) A52 was obtained from a sulfidic spring in the Volgograd region, Russia. Phylogenetic analysis based on the 16S rRNA gene sequences showed that all genomes represented the genus Thiothrix. Based on their average nucleotide identity and digital DNA-DNA hybridization data these new isolates and the MAG represent three species within the genus Thiothrix with the proposed names Thiothrix subterranea sp. nov. Ku-5^T, Thiothrix litoralis sp. nov. AS^T, and “Candidatus Thiothrix anitrata” sp. nov. A52. The complete genome sequences of Thiothrix fructosivorans Q^T and Thiothrix unzii A1^T were determined. Complete genomes of seven Thiothrix isolates, as well as two MAGs, were used for pangenome analysis. The Thiothrix core genome consisted of 1,355 genes, including ones for the glycolysis, the tricarboxylic acid cycle, the aerobic respiratory chain, and the Calvin cycle of carbon fixation. Genes for dissimilatory oxidation of reduced sulfur compounds, namely the branched SOX system (SoxAXBYZ), direct (soeABC) and indirect (aprAB, sat) pathways of sulfite oxidation, sulfur oxidation complex Dsr (dsrABEFHCEMKLJONR), sulfide oxidation systems SQR (sqrA, sqrF), and FCSD (fccAB) were found in the core genome. Genomes differ in the set of genes for dissimilatory reduction of nitrogen compounds, nitrogen fixation, and the presence of various types of RuBisCO.

Synthesis of L-asparagine Catalyzed by a Novel Asparagine Synthase Coupled With an ATP Regeneration System

Compared with low-yield extraction from plants and environmentally unfriendly chemical synthesis, biocatalysis by asparagine synthetase (AS) for preparation of L-asparagine (L-Asn) has become a potential synthetic method. However, low enzyme activity of AS and high cost of ATP in this reaction restricts the large-scale preparation of L-Asn by biocatalysis. In this study, gene mining strategy was used to search for novel AS with high enzyme activity by expressing them in Escherichia coli BL21 (DE3) or Bacillus subtilis WB600. The obtained LsaAS-A was determined for its enzymatic properties and used for subsequent preparation of L-Asn. In order to reduce the use of ATP, a class III polyphosphate kinase 2 from Deinococcus ficus (DfiPPK2-Ⅲ) was cloned and expressed in E. coli BL21 (DE3), Rosetta (DE3) or RosettagamiB (DE3) for ATP regeneration. A coupling reaction system including whole cells expressing LsaAS-A and DfiPPK2-Ⅲ was constructed to prepare L-Asn from L-aspartic acid (L-Asp). Batch catalytic experiments showed that sodium hexametaphosphate (>60 mmol L⁻¹) and L-Asp (>100 mmol L⁻¹) could inhibit the synthesis of L-Asn. Under fed-batch mode, L-Asn yield reached 90.15% with twice feeding of sodium hexametaphosphate. A final concentration of 218.26 mmol L⁻¹ L-Asn with a yield of 64.19% was obtained when L-Asp and sodium hexametaphosphate were fed simultaneously.

A Multi-Enzyme Cascade Reaction for the Production of 2'3'-cGAMP

Multi-enzyme cascade reactions for the synthesis of complex products have gained importance in recent decades. Their advantages compared to single biotransformations include the possibility to synthesize complex molecules without purification of reaction intermediates, easier handling of unstable intermediates, and dealing with unfavorable thermodynamics by coupled equilibria. In this study, a four-enzyme cascade consisting of ScADK, AjPPK2, and SmPPK2 for ATP synthesis from adenosine coupled to the cyclic GMP-AMP synthase (cGAS) catalyzing cyclic GMP-AMP (2'3'-cGAMP) formation was successfully developed. The 2'3'-cGAMP synthesis rates were comparable to the maximal reaction rate achieved in single-step reactions. An iterative optimization of substrate, cofactor, and enzyme concentrations led to an overall yield of 0.08 mole 2'3'-cGAMP per mole adenosine, which is comparable to chemical synthesis. The established enzyme cascade enabled the synthesis of 2'3'-cGAMP from GTP and inexpensive adenosine as well as polyphosphate in a biocatalytic one-pot reaction, demonstrating the performance capabilities of multi-enzyme cascades for the synthesis of pharmaceutically relevant products.

An ATP-free in vitro synthetic enzymatic biosystem facilitating one-pot stoichiometric conversion of starch to mannitol

D-Mannitol (hereinafter as mannitol) is a six-carbon sugar alcohol with diverse applications in food and pharmaceutical industries. To overcome the drawbacks of the chemical hydrogenation method commonly used for mannitol production at present, there is a need to search for novel prospective mannitol production strategies that are of high yield and low cost. In this study, we present a novel approach for the stoichiometric synthesis of mannitol via an in vitro synthetic enzymatic biosystem using the low-cost starch as substrate. By dividing the overall reaction pathway into three modules which could be executed sequentially in one pot, our design aimed at the stoichiometric conversion of starch-based materials into mannitol in an ATP-independent and cofactor-balanced manner. At optimized conditions, high product yields of around 95-98% were achieved using both 10 g/L and 50 g/L maltodextrin as substrate, indicating the potential of our designed system for industrial applications. This study not only provides a high-efficient strategy for the synthesis of mannitol but also expands the product scope of sugar alcohols by the in vitro synthetic enzymatic biosystems using low-cost starch-based materials as the input. KEY POINTS : • We described a design-build-test-learn pipeline to construct in vitro biosystems. • The designed system comprised six key enzymes and another three enzymes. • The system converted maltodextrin stoichiometrically to mannitol in one pot.

Production of L-Theanine Using Escherichia coli Whole-Cell Overexpressing γ-Glutamylmethylamide Synthetase with Bakers Yeast

L-Theanine, found in green tea leaves has been shown to positively affect immunity and relaxation in humans. There have been many attempts to produce L-theanine through enzymatic synthesis to overcome the limitations of traditional methods. Among the many genes coding for enzymes in the L-theanine biosynthesis, glutamylmethylamide synthetase (GMAS) exhibits the greatest possibility of producing large amounts of production. Thus, GMAS from Methylovorus mays No. 9 was overexpressed in several strains including vectors with different copy numbers. BW25113(DE3) cells containing the pET24ma::gmas was selected for strains. The optimal temperature, pH, and metal ion concentration were 50°C, 7, and 5 mM MnCl2, respectively. Additionally, ATP was found to be an important factor for producing high concentration of L-theanine so several strains were tested during the reaction for ATP regeneration. Bakers yeast was found to decrease the demand for ATP most effectively. Addition of potassium phosphate source was demonstrated by producing 4-fold higher L-theanine. To enhance the conversion yield, GMAS was additionally overexpressed in the system. A maximum of 198 mM L-theanine was produced with 16.5 mmol/l/h productivity. The whole-cell reaction involving GMAS has greatest potential for scale-up production of L-theanine.

Development of cGAMP-Luc, a sensitive and precise coupled enzyme assay to measure cGAMP in complex biological samples

2',5'/3',5'-cGMP-AMP (cGAMP) is a second messenger produced in response to cytosolic dsDNA that activates the stimulator of interferon genes (STING) pathway. We recently discovered that cGAMP is exported by cancer cells and that this extracellular signal is an immunotransmitter key to tumor detection and elimination by the innate immune system. The enhancement of extracellular cGAMP levels therefore holds great promise for managing cancer. However, there is still much more to understand about the basic biology of cGAMP before its full therapeutic potential can be realized. To answer these questions, we must be able to detect and quantitate cGAMP with an assay that is high-throughput, sensitive, and precise. Existing assays fall short of these needs. Here, we describe the development of cGAMP-Luc, a coupled enzyme assay that relies on the degradation of cGAMP to AMP by ectonucleotide pyrophosphatase phosphodiesterase 1 (ENPP1) and an optimized assay for the detection of AMP by luciferase. We also developed STING-CAP, a STING-mediated method to concentrate and purify cGAMP from any type of biological sample. We conclude that cGAMP-Luc is an economical high-throughput assay that matches the accuracy of and surpasses the detection limit of MS, the current gold standard of cGAMP quantitation. We propose that cGAMP-Luc is a powerful tool that may enable discoveries that advance insights into extracellular cGAMP levels in healthy and diseased tissues, such as cancer.

Reusable Bioluminescent Sensor for Ultrasensitive MicroRNA Detection Based on a Target-Introducing "Fuel-Loading" Mechanism

As a kind of important potential biomarkers, the expression level of some microRNAs (miRNAs) is closely related to cancer development and progression. Herein, a reusable ultra-sensitive "fuel-loadings" bioluminescent sensor was constructed to detect the trace miRNA based on the cascading signal amplification, which combined the target-introducing "fuel-loading" mechanism and cyclic bioluminescence assay. In this sensor, magnetic beads labeled with hairpin DNA probes (hDNA) could specifically hybridize with the target miRNA and isolate these targets from samples. Then, the target-introducing "fuel loading" mechanism worked because the poly(A) polymerase can catalyze the template-independent sequential addition of adenosine monophosphate (AMP) to the 3' ends of the miRNA targets to produce long poly(A) tails. The long poly(A) tails provided lots of 5'AMPs (cleaved by Exonuclease T), which further as fuels were converted into adenosine-triphosphate (ATP) to generate an enhanced bioluminescent signal by cyclic AMP pyrophosphorylation-ATP dephosphorylation. The "fuel-loadings" bioluminescent sensor realized a high sensitivity with a limit-of-detection of about 22.6 aM for miRNA 21. Moreover, this "fuel-loadings" bioluminescent sensor not only achieved regenerable and reusable measurement in the same microwell to decrease the analysis costs, but also could directly detect miRNA 21 in the serum without complicated extraction procedures. It showed excellent coherence with quantitative reverse transcription polymerase chain reaction for miRNA 21 detection of cancer patients' samples, indicating clinical translation potential for miRNA detection.

High Conversion of D-Fructose into D-Allulose by Enzymes Coupling with an ATP Regeneration System

D-Allulose is a rare monosaccharide that exists in extremely small quantities in nature, and it is also hard to prepare at a large scale via chemical or enzyme synthetic route due to low conversion and downstream separation complexity. Using D-psicose epimerase and L-rhamnulose kinase, a method enabling high conversion of D-allulose from D-fructose without the need for a tedious isomer separation step was established recently. However, this method requires expensive ATP to facilitate the reaction. In the present study, an ATP regenerate system was developed coupling with polyphosphate kinase. In our optimized reaction with purified enzymes, the conversion rate of 99% D-fructose was achieved at the concentrations of 2 mM ATP, 5 mM polyphosphate, 20 mM D-fructose, and 20 mM Mg²⁺ when incubated at 50 °C and at pH 7.5. ATP usage can be reduced to 10% of the theoretical amount compared to that without the ATP regeneration system. A fed-batch mode was also studied to minimize the inhibitory effect of polyphosphate. The biosynthetic system reported here offers a potential and promising platform for the conversion of D-fructose into D-allulose at reduced ATP cost.

Engineering a Seven Enzyme Biotransformation using Mathematical Modelling and Characterized Enzyme Parts

Multi-step enzyme reactions offer considerable cost and productivity benefits. Process models offer a route to understanding the complexity of these reactions, and allow for their optimization. Despite the increasing prevalence of multi-step biotransformations, there are few examples of process models for enzyme reactions. From a toolbox of characterized enzyme parts, we demonstrate the construction of a process model for a seven enzyme, three step biotransformation using isolated enzymes. Enzymes for cofactor regeneration were employed to make this in vitro reaction economical. Good modelling practice was critical in evaluating the impact of approximations and experimental error. We show that the use and validation of process models was instrumental in realizing and removing process bottlenecks, identifying divergent behavior, and for the optimization of the entire reaction using a genetic algorithm. We validated the optimized reaction to demonstrate that complex multi-step reactions with cofactor recycling involving at least seven enzymes can be reliably modelled and optimized.

Substrate recognition and mechanism revealed by ligand-bound polyphosphate kinase 2 structures

Inorganic polyphosphate is a ubiquitous, linear biopolymer built of up to thousands of phosphate residues that are linked by energy-rich phosphoanhydride bonds. Polyphosphate kinases of the family 2 (PPK2) use polyphosphate to catalyze the reversible phosphorylation of nucleotide phosphates and are highly relevant as targets for new pharmaceutical compounds and as biocatalysts for cofactor regeneration. PPK2s can be classified based on their preference for nucleoside mono- or diphosphates or both. The detailed mechanism of PPK2s and the molecular basis for their substrate preference is unclear, which is mainly due to the lack of high-resolution structures with substrates or substrate analogs. Here, we report the structural analysis and comparison of a class I PPK2 (ADP-phosphorylating) and a class III PPK2 (AMP- and ADP-phosphorylating), both complexed with polyphosphate and/or nucleotide substrates. Together with complementary biochemical analyses, these define the molecular basis of nucleotide specificity and are consistent with a Mg²⁺ catalyzed in-line phosphoryl transfer mechanism. This mechanistic insight will guide the development of PPK2 inhibitors as potential antibacterials or genetically modified PPK2s that phosphorylate alternative substrates.

Catalytic Activity Profile of Polyphosphate Kinase 1 from Myxococcus xanthus

Polyphosphate kinase 1 (Ppk1) catalyzes reverse transfer of the terminal phosphate from ATP to form polyphosphate (polyP) and from polyP to form ATP, and is responsible for the synthesis of most of cellular polyPs. When Ppk1 from Myxococcus xanthus was incubated with 0.2 mM polyP_60-70 and 1 mM ATP or ADP, the rate of ATP synthesis was approximately 1.5-fold higher than that of polyP synthesis. If in the same reaction the proportion of ADP in the ATP/ADP mixture exceeded one-third, the equilibrium shifted to ATP synthesis, suggesting that M. xanthus Ppk1 preferentially catalyzed ATP formation. At the same time, GTP and GDP were not recognized as substrates by Ppk1. In the absence of polyP, Ppk1 generated ATP and AMP from ADP, and ADP from ATP and AMP, suggesting that the enzyme catalyzed the transfer of a phosphate group between ADP molecules yielding ATP and AMP, thus exhibiting adenylate kinase activity.

Panoramic view of a superfamily of phosphatases through substrate profiling

Large-scale activity profiling of enzyme superfamilies provides information about cellular functions as well as the intrinsic binding capabilities of conserved folds. Herein, the functional space of the ubiquitous haloalkanoate dehalogenase superfamily (HADSF) was revealed by screening a customized substrate library against >200 enzymes from representative prokaryotic species, enabling inferred annotation of ∼35% of the HADSF. An extremely high level of substrate ambiguity was revealed, with the majority of HADSF enzymes using more than five substrates. Substrate profiling allowed assignment of function to previously unannotated enzymes with known structure, uncovered potential new pathways, and identified iso-functional orthologs from evolutionarily distant taxonomic groups. Intriguingly, the HADSF subfamily having the least structural elaboration of the Rossmann fold catalytic domain was the most specific, consistent with the concept that domain insertions drive the evolution of new functions and that the broad specificity observed in HADSF may be a relic of this process.

Mevalonate-dependent enzymatic synthesis of amorphadiene driven by an ATP-regeneration system using polyphosphate kinase

Polyphosphate kinase (PPK), which can regenerate ATP from ADP, was utilized in the mevalonate-dependent enzymatic synthesis of amorphadiene. The activity of PPK, cloned from Escherichia coli, was determined by (31)P-NMR. The yield from the PPK-catalyzed synthesis was 25%, 2.5 times higher than that without PPK. The (31)P-NMR analysis of the final reaction mixture indicated no accumulation of intermediates.

Inorganic polyphosphate: essential for growth and survival

Inorganic polyphosphate (Poly P) is a polymer of tens to hundreds of phosphate residues linked by "high-energy" phosphoanhydride bonds as in ATP. Found in abundance in all cells in nature, it is unique in its likely role in the origin and survival of species. Here, we present extensive evidence that the remarkable properties of Poly P as a polyanion have made it suited for a crucial role in the emergence of cells on earth. Beyond that, Poly P has proved in a variety of ways to be essential for growth of cells, their responses to stresses and stringencies, and the virulence of pathogens. In this review, we pay particular attention to the enzyme, polyphosphate kinase 1 (Poly P kinase 1 or PPK1), responsible for Poly P synthesis and highly conserved in many bacterial species, including 20 or more of the major pathogens. Mutants lacking PPK1 are defective in motility, quorum sensing, biofilm formation, and virulence. Structural studies are cited that reveal the conserved ATP-binding site of PPK1 at atomic resolution and reveal that the site can be blocked with minute concentrations of designed inhibitors. Another widely conserved enzyme is PPK2, which has distinctive kinetic properties and is also implicated in the virulence of some pathogens. Thus, these enzymes, absent in yeast and animals, are novel attractive targets for treatment of many microbial diseases. Still another enzyme featured in this review is one discovered in Dictyostelium discoideum that becomes an actin-like fiber concurrent with the synthesis, step by step, of a Poly P chain made from ATP. The Poly P-actin fiber complex, localized in the cell, lengthens and recedes in response to metabolic signals. Homologs of DdPPK2 are found in pathogenic protozoa and in the alga Chlamydomonas. Beyond the immediate relevance of Poly P as a target for anti-infective drugs, a large variety of cellular operations that rely on Poly P will be considered.

Thermostable ATP regeneration system using polyphosphate kinase from Thermosynechococcus elongatus BP-1 for D-amino acid dipeptide synthesis

D-alanine-D-alanine ligase from Thermotoga maritima ATCC 43589 (TmDdl) was a useful biocatalyst for synthesizing D-amino acid dipeptides. TmDdl showed a broad substrate specificity at a high temperature; however, ATP was required for its reaction. One of the methods for an effective ATP supply was the coupling reaction with an ATP regeneration system. However, ATP regeneration systems consisted of enzymes from mesophiles and were difficult to operate at high temperatures. Therefore, an ATP regeneration system that could be used at high temperatures was desired to utilize TmDdl for the effective production of D-amino acid dipeptides. To establish a thermostable ATP regeneration system, polyphosphate kinase from a thermophile, Thermosynechococcus elongatus BP-1 (TePpk), was characterized. TePpk showed thermostability up to 70 degrees C; therefore, it was considered that a thermostable ATP regeneration system could be established using TePpk. In the coupling reaction with purified TmDdl and TePpk at 60 degrees C, the amount of ATP required for D-alanyl-D-alanine synthesis could be reduced to 1% of the theoretical amount required when there was no ATP regeneration. When the coupling reaction was applied to a resting cell reaction, ATP was regenerated from an adenosine scaffold in the cell, and D-alanyl-D-alanine was successfully synthesized in the maximum yield of 80% (mol/mol) without the addition of ATP. Thus, an effective synthesis of D-amino acid dipepitides was achieved using the thermostable ATP regeneration system.

Enhancement of protein synthesis by an inorganic polyphosphate in an E. coli cell-free system

In an E. coli cell-free protein synthesis system, the addition of an inorganic polyphosphate [poly(P)] with polyphosphate:AMP phosphotransferase (PAP), which regenerates AMP to ADP, increased the amount of protein synthesis. The maximum yield of the translation product (green fluorescent protein) in the E. coli cell-free system provided by Roche Diagnostics (RTS-100) was 1.16 mg/ml under the optimum reaction condition, which corresponded to a 5.7-fold of that obtained under the standard reaction condition described in the manufacturer's protocol. Interestingly, poly(P) alone enhanced protein synthesis to some extent. When we added poly(P) to the reaction mixture, ATP was consumed at a faster rate, leading to a rapid accumulation of AMP. By adding both poly(P) and PAP to the reaction mixture, an efficient ATP regeneration reaction derived from AMP occurred and the ATP level was recovered. Since the protein synthesis enhancement by poly(P) was also observed when mRNA was added as the template in the reaction, poly(P) accelerated the translation reaction by directly affecting the translation machinery. This also occurred when we used the Pure-system Classic Mini kit (Post Genome Institute) that contained the minimum requirements (pure enzymes and chemicals) for translation and transcription. We also observed that poly(P) extended the half-life of the mRNA template.

Enzyme-catalyzed poly(3-hydroxybutyrate) synthesis from acetate with CoA recycling and NADPH regeneration in Vitro

We established a novel enzyme-catalyzed poly(3-hydroxybutyrate) [P(3HB)] synthesis system capable of recycling CoA on the basis of the P(3HB) biosynthetic pathway in Ralstonia eutropha. The system includes purified beta-ketothiolase (PhaA), NADPH-dependent acetoacetyl-CoA reductase (PhaB), PHA synthase (PhaC), acetyl-CoA synthetase (Acs) and glucose dehydrogenase (GDH). In this system, acetyl-CoA was synthesized from acetate and CoA by Acs and ATP, and then two molecules of acetyl-CoA were condensed by PhaA to synthesize acetoacetyl-CoA, which was converted to (R)-3-hydroxybutyryl-CoA (3HBCoA) by PhaB and NADPH. The 3HBCoA was polymerized by PhaC and converted to P(3HB). In this system, the CoA molecules that were released during the condensation and polymerization reactions catalyzed by PhaA and PhaC, respectively, were reused successfully for the synthesis of acetyl-CoA. In addition, NADPH, which was consumed in the reduction of acetoacetyl-CoA, was regenerated by the action of GDH. In this system, the yield of P(3HB) synthesized from acetate as the substrate was 5.6 mg in a 5-ml reaction mixture, and the weight-average molecular weight and polydispersity were 6.64 x 10(6) and 1.36, respectively. Furthermore, CoA was reused at least 26 times, and NADPH was also regenerated at least 26 times during 24 h of reaction.

Use of helper enzymes for ADP removal in infrared spectroscopic experiments: application to Ca2+-ATPase

Adenylate kinase (AdK) and apyrase were employed as helper enzymes to remove ADP in infrared spectroscopic experiments that study the sarcoplasmic reticulum Ca(2+)-ATPase. The infrared absorbance changes of their enzymatic reactions were characterized and used to monitor enzyme activity. AdK transforms ADP to ATP and AMP, whereas apyrase consumes ATP and ADP to generate AMP and inorganic phosphate. The benefits of using them as helper enzymes are severalfold: i), both remove ADP generated after ATP hydrolysis by ATPase, which enables repeat of ATP-release experiments several times with the same sample without interference by ADP; ii), AdK helps maintain the presence of ATP for a longer time by regenerating 50% of the initial ATP; iii), apyrase generates free P(i), which can help stabilize the ADP-insensitive phosphoenzyme (E2P); and iv), apyrase can be used to monitor ADP dissociation from transient enzyme intermediates with relatively high affinity to ADP, as shown here for ADP dissociation from the ADP-sensitive phosphoenzyme intermediate (Ca(2)E1P). The respective infrared spectra indicate that ADP dissociation relaxes the closed conformation immediately after phosphorylation partially back toward the open conformation of Ca(2)E1 but does not trigger the transition to E2P. The helper enzyme approach can be extended to study other nucleotide-dependent proteins.

Polyphosphate:AMP phosphotransferase as a polyphosphate-dependent nucleoside monophosphate kinase in Acinetobacter johnsonii 210A

We have cloned the gene for polyphosphate:AMP phosphotransferase (PAP), the enzyme that catalyzes phosphorylation of AMP to ADP at the expense of polyphosphate [poly(P)] in Acinetobacter johnsonii 210A. A genomic DNA library was constructed in Escherichia coli, and crude lysates of about 6,000 clones were screened for PAP activity. PAP activity was evaluated by measuring ATP produced by the coupled reactions of PAP and purified E. coli poly(P) kinases (PPKs). In this coupled reaction, PAP produces ADP from poly(P) and AMP, and the resulting ADP is converted to ATP by PPK. The isolated pap gene (1,428 bp) encodes a protein of 475 amino acids with a molecular mass of 55.8 kDa. The C-terminal region of PAP is highly homologous with PPK2 homologs isolated from Pseudomonas aeruginosa PAO1. Two putative phosphate-binding motifs (P-loops) were also identified. The purified PAP enzyme had not only strong PAP activity but also poly(P)-dependent nucleoside monophosphate kinase activity, by which it converted ribonucleoside monophosphates and deoxyribonucleoside monophosphates to ribonucleoside diphosphates and deoxyribonucleoside diphosphates, respectively. The activity for AMP was about 10 times greater than that for GMP and 770 and about 1,100 times greater than that for UMP and CMP.

Polyphosphate synthetic activity of polyphosphate:AMP phosphotransferase in Acinetobacter johnsonii 210A

Polyphosphate:AMP phosphotransferase (PAP) has been identified as an enzyme that catalyzes the phosphorylation of AMP with inorganic polyphosphates [poly(P)] as phosphate donors. We found that the purified PAP of Acinetobacter johnsonii 210A has poly(P) synthetic activity. The PAP catalyzes the dephosphorylation of ADP and processively synthesizes poly(P) of 200 to 700 residues. Comparatively lower concentrations of MgCl(2) (20 mM) were required to obtain optimum poly(P) synthetic activity, whereas higher concentrations of MgCl(2) (100 mM) were necessary for optimum PAP activity. ADP is preferred over GDP as a phosphate donor for poly(P) synthesis. The K(m) and V(max) values for ADP in the poly(P) synthetic activity of PAP were 8.3 mM and 55 micromol min(-1) mg(-1), respectively. We concluded that the PAP of A. johnsonii 210A is a novel type of poly(P) kinase that uses ADP and GDP as substrates.

Regeneration of cofactors for use in biocatalysis

Cofactor-dependent enzymes catalyze many synthetically useful reactions. The high cost of cofactors, however, necessitates in situ cofactor regeneration for preparative applications. After two decades of research, several cofactors can now be effectively regenerated using enzyme or whole-cell based methods. Significant advances have been made in this area in the past three years and include the development of novel or improved methods for regenerating ATP, sugar nucleotides and 3-phosphoadenosine-5'-phosphosulphate. These approaches have found novel applications in biocatalysis.