Resin-Bonded Bridges – the Problem or the Solution? Part 2: Practical Techniques

Practical advice for successful clinical treatment with resin-bonded bridges

Resin-bonded bridges are one of the main options for replacing missing teeth for hypodontia patients. This technique offers several advantages for these patients, who are often young, have unrestored abutment teeth, and have had tooth positions optimised by orthodontic treatment. However, the replacement of missing teeth can be challenging due to tooth positions and anomalies of abutment tooth shape and size.These patients are often young adults at the time of restoration, making the minimally invasive nature and predictable long-term success of resin-bonded bridges advantageous over other treatment methods.This paper in the hypodontia themed issue discusses the importance of case selection and gives practical advice for the design and provision of resin-bonded bridges.

How long does it take for the occlusion to re-establish following the placement of restorations at an increased occlusal vertical dimension? A literature review

Purpose This literature review aimed to investigate predictability of re-establishment of the occlusion following placement of restorations at an increased OVD, duration and to assess the quality of the available evidence.Methods An electronic search of articles using MEDLINE (1946-01/2019), EMBASE (1974-01/2019) and the Cochrane databases was undertaken. Search terms included dental restoration, vertical dimension and time. Studies involving placement of restorations at an increased OVD and recorded the time taken for the occlusion to re-establish were included. Eligibility assessments were carried out independently by two reviewers who also undertook independent extraction of predefined data fields, including study quality indicators.Results The search provided 61 results with 11 being relevant. A further 5 papers were identified for full text analysis. 4 papers used similar data from previous studies and 3 were excluded after full text assessment.. A final total of 9 papers were included in the review. It was indicated that the technique of placing restorations at an increased OVD appears to be clinically predictable in terms of re-establishment of occlusion and appears to occur most rapidly in younger patients.Conclusions The time taken for the occlusion to re-establish was between 15 days to 24 months. However, there is a need for prospective studies to evaluate the process in terms of success, predictive variables and specifically how long the process takes and this information would be helpful for both clinicians and patients, so that they know what to expect before embarking on a treatment.

Effect of Different Cleaning Methods on Shear Bond Strength of Resin Cement to Contaminated Zirconia

The aim of this study was to evaluate the effect of different cleaning methods on the shear bond strength (SBS) of resin cement to contaminated zirconia specimens. Eighty rectangular-shaped specimens (2 × 5 × 10 mm) were fabricated from Zirconia blocks (IPS e.max ZirCAD) and randomly divided into 8 groups (n = 10). Group A (control) was not exposed to contaminants. The following tests specimens were contaminated with saliva and silicone indicating paste. Group B was coated with ceramic primer, then subjected to contamination. Groups C, D, E, F, G, and H were contaminated; cleaned with water rinse, Ivoclean, air particle abrasion, hydrofluoric acid, KATANA^TM Cleaner and ZirClean^TM, respectively, and then coated with ceramic primer and bonded to dual cure resin cement cylinders. All the specimens were subjected to artificial aging and surviving specimens were subjected to the SBS test. For statistical analysis, ANOVA and multiple comparison methods at the 0.05 significance level were used. There was no statistically significant difference among Ivoclean (21.48 ± 2.90 MPa), air particle abrasion (21.92 ± 2.85 MPa), and the control group (24.68 ± 5.46). The application of ceramic primer before contamination did not preserve the SBS of resin cement to zirconia. Cleaning the contaminated zirconia surface with hydrofluoric acid (15.03 ± 3.63) or KATANA^TM Cleaner (17.27 ± 7.63) did not restore SBS to the uncontaminated state, but it was significantly higher than simply rinsing with water (12.46 ± 5.17) or the use of ZirClean^TM (11.59 ± 5.53). The bond strength of resin cement to zirconia was influenced by cleaning methods.

10-Methacryloyloxydecyl Dihydrogen Phosphate (10-MDP)-Containing Cleaner Improves Bond Strength to Contaminated Monolithic Zirconia: An In-Vitro Study

Contamination of zirconia restorations before cementation can impair the resin–zirconia bonding durability. The objective of this study was to evaluate the effect of human saliva or blood decontamination with 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP)-containing cleaner on the resin–zirconia shear bond strength (SBS). Methods: A total of 220 zirconia specimens were prepared and air-abraded and randomly distributed into 11 groups (n = 20 per group). Except for the control group (no contamination), zirconia specimens were contaminated with either human saliva (five groups) or blood (five groups), and then subjected to one of five cleaning methods: water rinsing, 38% phosphoric acid etchant (Pulpdent Corp., Watertown, MA, USA), 70% isopropanol alcohol (Avalon Pharma, Riyadh, Saudi Arabia), Ivoclean (Ivoclar Vivadent, Schaan, Lichtenstein) and Katana Cleaner (Kuraray Noritake, Tokyo, Japan). The resin–zirconia SBS was tested at 24 h and after thermocycling (10 k cycles). Three-way ANOVA followed by Tukey’s multiple comparisons test were utilized to analyze the SBS data. Failure modes were evaluated using a scanning electron microscope. Results: Both blood and saliva significantly affected resin–zirconia SBS as contaminants. After thermocycling, there was no statistically significant difference between SBS obtained after decontamination with the Katana Cleaner (blood, 6.026 ± 2.805 MPa; saliva, 5.206 ± 2.212 MPa) or Ivoclean (blood, 7.08 ± 3.309 MPa; saliva, 6.297 ± 3.083 MPa), and the control group (no contamination, 7.479 ± 3.64 MPa). Adhesive and mixed failures were the most frequent among the tested groups. Conclusion: Both 10-MDP-containing cleaner (Katana Cleaner) and zirconium oxide-containing cleaner (Ivoclean) could eliminate the negative effect of saliva and blood contamination on resin–zirconia SBS.