Changes in ulnar variance in relation to forearm rotation and grip

Association of ulnar variance with three-dimensional carpal alignment and demographics in asymptomatic volunteers

BACKGROUND

Several carpal pathologies are considered to be related to ulnar variance. Recently, computer-aided computed tomography (CT) analysis software was introduced to quantify three-dimensional (3D) carpal alignment with high accuracy and reliability.

PURPOSE

To determine the association of ulnar variance with 3D carpal alignment and demographics.

MATERIAL AND METHODS

A wrist of 121 asymptomatic volunteers (69 men, 52 women; mean age = 38 ± 10.4 years) was imaged in the neutral wrist position with cone-beam CT. Computer-aided CT analysis software (Bonelogic), based on segmentation and numerical modelling, was used to define ulnar variance and standardized 3D axes for all carpal bones. The association of ulnar variance with 3D carpal alignment, age of the volunteer, and side and dominance of the imaged wrist was assessed.

RESULTS

The mean ulnar variance was -1.6 ± 1.5 mm (range = -5.3 to 2.4 mm). The mean ulnar variance was -1.9 mm and -1.1 mm in men and women (P = 0.007), respectively. Of the imaged 121 wrists, 18 (15%) had positive and 103 (85%) negative ulnar variance. There was no association between ulnar variance and any of the radio- or intercarpal angle values in either the sagittal or coronal plane (ρ = -0.16…0.17, r = -0.13….0.12). The ulnar variance showed no association with side (P = 0.51) or dominance (P = 0.27) of the imaged wrist.

CONCLUSION

3D carpal alignment is not affected by ulnar variance. The association of ulnar variance with sex may in part explain the difference in reported prevalence of some carpal pathologies, such as ulnar impaction syndrome and Kienböck's disease.

Ulnar positive variance associated with TFCC foveal tear

OBJECTIVE

The ulnar positive variance (UPV) can be observed on simple radiography due to a triangular fibrocartilage complex (TFCC) foveal tear. This study investigated to identify how much radiographic UPV occurs due to a TFCC foveal tear, which may be misdiagnosed as an ulnar impaction syndrome (UIS).

MATERIALS AND METHODS

One hundred forty patients who underwent arthroscopic transosseus TFCC foveal repair from March 2013 to March 2019 in our institution were enrolled in this study. Ulnar variances were measured in preoperative, postoperative 6 weeks, 1-year follow-up wrist posteroanterior (PA) radiograph, and power grip PA radiograph of the affected wrist and were compared with those of the same patient's unaffected wrist.

RESULTS

In the neutral wrist PA radiograph, ulnar variance increased by 0.56 mm (p < 0.001) after TFCC foveal tear compared to the unaffected side. In the power grip view, ulnar variance also increased by 0.39 mm (p < 0.001) in the affected wrist. The preoperative ulnar positive variance was reduced after an arthroscopic transosseous TFCC foveal repair from 0.56 to 0 mm (p < 0.001). No significant statistical difference was observed between an Atzei class 2 and 3 TFCC tear (0.56 mm vs. 0.41 mm, p = 0.263).

CONCLUSION

This study revealed that TFCC foveal tear induces 0.56 mm of radiologic UPV, which was successfully corrected after arthroscopic transosseous TFCC foveal repair. Therefore, UPV associated with TFCC foveal tear should not be misdiagnosed as an UIS. Also, when ulnar shortening osteotomy is planned in case of UIS combined with TFCC foveal tear, the amount of UPV induced by TFCC foveal tear should be considered to prevent over-shortening.

Comparison of diaphyseal and metaphyseal ulnar shortening osteotomies for the treatment of ulnar impaction syndrome

BACKGROUND

Ulnar shortening osteotomy (USO) is a common surgical procedure for the treatment of ulnar impaction syndrome (UIS). The purpose of this study was to compare the results of metaphyseal and diaphyseal USO.  METHODS: This retrospective study compared the clinical outcomes and complications of 32 patients who underwent diaphyseal step-cut USO (n = 10), diaphyseal oblique USO (n = 12), or metaphyseal USO (n = 10).

RESULTS

Patient characteristics, ulnar variance, wrist range of motion, preoperative pain, grip strength, and functional scores (quick disability of the arm, shoulder, and hand and patient-rated wrist evaluation) were comparable. Both operation time (79.5 vs. 138/139 min) and incision length (7.80 vs. 9.67/13.00 cm) were shorter in the metaphyseal USO than in the diaphyseal oblique/step-cut USO. Compared with diaphyseal oblique/step-cut USO, metaphyseal osteotomies were associated with greater improvement in the pain on postoperative day 3 and shorter bone healing time. The requirements for implant removal were the same among the three groups. No complications were observed in any group.

CONCLUSION

Compared with diaphyseal USO, metaphyseal USO has advantages for operation time and incision length, early postoperative pain, bone healing in UIS management. The results suggested that metaphyseal USO could be widely applied to the surgical treatment of UIS. However, the long-term outcomes of these techniques still require further evaluation using more large-scale, randomized clinical trials.

Kinematic analysis of forearm rotation using four-dimensional computed tomography

This study aimed to quantify forearm kinematics with a focus on the forearm rotation axis. Ten healthy volunteers were included in the study. One three-dimensional computed tomographic scan and two four-dimensional computed tomographic scans were done in all the arms to capture forearm joint motion. After image processing, the rotation axis and the movement of the radius with respect to various axes were quantified. The rotation axis was calculated using finite helical axis analysis and a circle fitting approach. The mean error of the rotation axis found through circle fitting was 0.2 mm (SD 0.1) distally and 0.1 mm (SD 0.1) proximally, indicating an improvement in precision over the finite helical axis approach. The translations of the radius along the ulnar axis and the forearm rotation axis were 2.6 (SD 0.8) and 0.6 mm (SD 0.9), respectively. The rotation of the radius around the radial axis was 7.2°. The techniques presented provide a detailed description of forearm kinematics.

Radial distraction may reduce the incidence of ulnar-sided wrist pain in ulna-plus morphology intraoperatively following distal radius fractures fixation

INTRODUCTION

Fixed-angle plate fixation can be an effective treatment for distal radius fractures (DRFs). However, patients with existing ulnar positive variance might be at risk of developing symptoms of ulnar-sided wrist pain (USWP). Ulnar shortening osteotomy (USO) is one of the main treatment options for USWP. We hypothesized that a limited radial distraction at the fracture site at the time of surgery for DRF would be functionally equivalent to an indirect USO and that if this were done in a patient with an ulnar plus morphology it could potentially decrease the risk of USWP.

METHODS

This retrospective study was conducted at a single institution and all the surgeries were performed by single surgeon. A total of 136 patients (92 women and 44 men) with a mean age of 55 years were enrolled with 57 patients in the distraction group (from 2014 to 2017) and 79 patients (from 2011 to 2013) in the non-distraction group. Patients were assessed USWP. Functional outcomes were assessed using the Disabilities of the Arm, Shoulder and Hand (DASH) questionnaire, Visual Analogue Scale (VAS) for pain, grip strength, and range of motion for the wrist.

RESULTS

The mean follow-up was 37.9 months (range, 28-61 months). The radiographs at postoperative 2-year follow-ups showed the mean ulnar positive variance was 1.3 mm (range, 1-2 mm) in the distraction group and 3.5 mm (range, 2-5 mm) in the non-distraction group. The average of the distraction length was 2.32 mm (range, 2-3 mm). At the 2-year follow-ups, USWP presented in 7% (four patients) in the distraction group, which was significantly less than the incidence of 28% (22 patients) in the non-distraction group. The distraction group exhibited significantly better DASH scores and grip strength and less subsequent ulnar-shortening osteotomy for ulnar-sided wrist pain.

CONCLUSIONS

The radial distraction procedure performed during DRFs fixation could possibly reduce the occurrence of postoperative USWP and improve the functional outcomes.

LEVEL OF EVIDENCE

Level III, Therapeutic.

Dorsal Plate Osteosynthesis in Simple and Complex Fractures of the Distal Radius: A Radiological Analysis of 166 Cases

Background  To report the radiologic outcome and rate of complications of open reduction and internal fixation (ORIF) using a dorsal plate fixation of simple and complex distal radius fractures in adult patients. Methods  Patients treated with dorsal ORIF of simple and complex distal radius fractures between December 2008 and April 2013 were included in this single-center retrospective study. Type of fracture, radiographic measurements, and complications were documented. Results  One-hundred and sixty-six patients/fractures were included. Restoration of radial inclination (22° ± 3°) was achieved in 38%. Radial height (14 ± 1 mm) was least likely to be restored to normal values postoperative in 25%. Normal ulnar variance (0.7 ± 1.5 mm) could be observed in 60% and adequate volar tilt (11° ± 5°) was achieved in 50% at final follow-up. We observed one loss of reduction in an AO type C2 fracture and a total of 15 nonimplant-related minor clinical complications. Conclusion  Our radiographic findings after dorsal plating are comparable to those published on volar plating. The changes in radial height and volar tilt could be attributed to projection-related differences in the radiographs and did not signify a loss of reduction in all cases. Clinical Relevance  Dorsal plating of distal radius fractures is safe and remains an important approach in the treatment of complex distal radius fractures. Complications in our study were even less compared to those reported in the literature. Type of Study/Level of Evidence  This is a Type IV study. Level of Experience of Surgeons  The level of experience of surgeons is III-V.

Radius distraction during volar plating of distal radius fractures may improve distal radioulnar joint stability at minimum 3-year follow-up: a retrospective case series study

Background

The surgical technique of radius distraction for stabilization of distal radioulnar joint (DRUJ) if intraoperative DRUJ instability was found after the fixation of distal radius fracture has been previously described, but this surgical technique lacks clinical and radiographic effect in minimal 3 years follow-up. We therefore evaluated the clinical outcome and radiographic results of radius distraction in minimal 3 years follow-up as long-term evaluation.

Methods

We reviewed the case series of distal radius fracture with concomitant DRUJ instability receiving radius distraction from the senior author over a 5-year period (January 1^st, 2013, to June 30^th, 2017) retrospectively. Radius distraction during volar plating was performed by moving the volar plate distally via compression screw loosening/fastening to achieve firm endpoint on the dorsopalmar stress test. The evaluations of radiographic, including bone union time and ulnar variance, and clinical outcomes, including grading of DRUJ instability, NRS of wrist pain, DASH score, MMWS score, and range of motion of operated wrist at final follow-up, were performed at clinic as minimum 3-year follow-up; a total 34 patients had been evaluated.

Results

At minimal post-operative 36 months follow-up, all cases demonstrated acceptable wrist range of motion with stable DRUJs, low NRS of wrist pain (0.6, SD 0.7), and satisfactory DASH score (mean 9.1, SD 6.2) and MMWS score (mean 87, SD 10). There were no cases suffering from nonunion of distal radius. The mean ulnar variance of injured wrist and uninjured wrist were -1.2 mm and 0.2 mm, respectively (SD 1.0 and 0.6) with significant statistical difference.

Conclusions

Radius distraction during volar fixation of distal radius fracture should be considered if DRUJ instability was found by the dorsopalmar stress test intraoperatively, and the long-term DRUJ stability could be achieved by maintenance of normal-to-negative ulnar variance, with decreased wrist pain and satisfactory function outcome.

Level of Evidence

Therapeutic Level IV

Supplementary Information

The online version contains supplementary material available at 10.1186/s12891-022-05108-z.

Radiological, Clinical and Functional Outcomes of Combined Dorsal and Volar Locking Plate Osteosynthesis for Complex Distal Radius Fractures

PURPOSE

The purpose of this study was to assess the short- to mid-term radiologic, clinical, and functional outcomes of patients treated with combined dorsal and volar locking plating for internal fixation of complex, comminuted, intra-articular, distal radius fractures.

METHODS

We performed a retrospective review of 34 patients treated with combined dorsal and volar locking plates for the internal fixation of complex, comminuted, intra-articular distal radius fractures. Radiographic and clinical parameters were recorded at a mean of 48 months after surgery. Activities of daily living and quality of life were assessed by the Disabilities of the Arm, Shoulder, and Hand and Patient-Rated Wrist Evaluation questionnaires.

RESULTS

Compared with the contralateral wrist, the treated wrist regained 73% of flexion, 81% of extension, 86% of ulnar deviation, 90% of radial deviation, 98% of pronation, 99% of supination, and 93% of grip strength. Mean Disabilities of the Arm, Shoulder, and Hand and Patient-Rated Wrist Evaluation scores were 11 (range, 0-78) and 11 (range, 0-77), respectively. Radial height and radial inclination were restored anatomically in 24% and 41% of patients, respectively, while volar tilt and ulnar variance were restored in 68% of patients.

CONCLUSION

The overall functional and radiologic outcome of patients with comminuted intra-articular complex distal radius fractures treated with the combined dorsovolar plate osteosynthesis was good to excellent.

LEVEL OF EVIDENCE

Therapeutic IV.

Comparative study between fixed-angle and polyaxial screws in distal radius fixation with two volar locking plates

INTRODUCTION

When treating a distal radius fracture with a volar locking plate (VLP), numerous plate-screw designs are available. To date, there is not a screw fastening system with a clear superiority among the others.

HYPOTESIS

Fixed-angle screws are superior to polyaxial screws in distal radius VLP fixation with respect to screw protrusion and reduction preservation.

MATERIAL AND METHODS

A prospective cohort study based on eighty patients was performed. The first forty patients were treated by polyaxial VLP (PA group) were the next forty by a fixed-angle VLP (FA group). Fixation was performed by the flexor carpi radialis approach. Screws were placed 2mm shorter than actual measurement and intraoperative AP, lateral and tilt wrist views were done routinely. A computed tomography (CT) was conducted searching for screw protrusion. Loss of reduction was calculated from the difference between post-operative x-rays values and those at the 6-month follow-up. The total follow-up was 12 months with no losses.

RESULTS

Postoperative CT detected dorsal screw protrusion in 17 patients in PA group and 16 patients in FA group that intraoperative radiographs were assumed as correct (p=0.48). The mean invasion of dorsal cortex was of 2.2mm (1-7mm) for PA group and 2.6mm (1-5mm) for FA group (p=0.70). As from those protruding screws, the mean size was registered founding that fixed-angle screws had protrusions with shorter screws 20 vs. 22mm (p<0.05). Intraarticular screw protrusion was registered in 3 and 2 patients respectively (p>1.0). Experienced loss of reduction in volar tilt (p=0.42), radial inclination (p=0.75) and ulnar variance (p=0.83) were equivalent in both groups while a better preservation of the radial height in the PA group was observed (p<0.05).

DISCUSSIONS

In terms of screw protrusion rate, both fastening systems where similar. However, fixed-angle group invaded the dorsal cortex with shorter screws. Polyaxial screws were associated with a better preservation of the radial height. Finally, this study reinforces the idea that dorsal and articular screw protrusion is more frequent than we expected.

LEVEL OF EVIDENCE

II; therapeutic, prospective cohort study.

Loss of radial height in extra-articular distal radial fracture following volar locking plate fixation

BACKGROUND

Radial height is an important prognostic factor in treating distal radius fracture. However, does further collapse of radial height in distal radius fractures after with volar locking plate fixation have a great impact on the prognosis? The present study aimed to elucidate radial height loss and determine the associated risk factors after open reduction and internal fixation with volar locking plate in patients with extra-articular distal radius fractures.

HYPOTHESIS

Patients with radial height collapse after fracture reduction and internal fixation with a volar locking plate may have poor outcomes.

METHODS

Data of 87 patients (21 male) undergoing surgery for acute extra-articular distal radius fractures (AO: 23-A2 or 23-A3) between February 2014 and July 2016 were evaluated retrospectively. Patients were divided into two groups by radial height loss. Potential risk factors were tested by Pearson correlation coefficients. Stepwise multiple regression logistic analysis determined significant independent risk factors for extra-articular distal radius fractures. Clinical evaluation was performed by the same surgeon by determining wrist ROM. Grip strength was measured with a Jamar dynamometer and compared with non-affect wrist in percentage. In addition, all the patients were asked to grade modified Mayo wrist score and Visual Analogue Scale (VAS) score. These findings were recorded postoperative 1 year of follow-up.

RESULTS

Mean radial height loss was 1.3±0.9mm. Age (ß=0.002, p=0.003), postoperative ulnar-positive deformity (ß=0.107, p<0.001), DEXA (ß=-0.015, p=0.008), and shortest diameter of distal fracture fragment in AP and lateral views (ß=-0.050, p=0.037; ß=-0.080, p=0.043) were significantly associated with radial height loss. As for the outcome of clinical prognosis, though radial height collapse group had poorer wrist range of motion, there was no statistical difference. Besides, there were no significant differences in grips strength and VAS score between these two groups. However, in regards of modified Mayo wrist score, the percentage of patients with poor outcomes is significant higher in radial height collapse group (p=0.039). Moreover, all patients with poor outcomes in radial height collapse groups were older than 65-year-old.

DISCUSSION

Radial height loss is noted in patients undergoing open reduction and internal fixation with volar locking plate for extra-articular distal radius fractures. Risk factors for radial height collapse include advanced age, poor bone quality, shortest distance between fracture site and articular surface and postoperative ulnar-positive deformity.

LEVEL OF EVIDENCE

IV; non-comparative prospective study.

Distal Radius Physeal Bar and Ulnar Overgrowth: Indications for Treatment

BACKGROUND

Distal radius physeal bar with associated growth arrest can occur because of fractures, ischemia, infection, radiation, tumor, blood dyscrasias, and repetitive stress injuries. The age of the patient as well as the size, shape, and location of the bony bridge determines the deformity and associated pathology that will develop.

METHODS

A search of the English literature was performed using PubMed and multiple search terms to identify manuscripts dealing with the evaluation and treatment of distal radius physeal bars and ulnar overgrowth. Single case reports and level V studies were excluded.

RESULTS

Manuscripts evaluating distal radial physeal bars and their management were identified. A growth discrepancy between the radius and ulna can lead to distal radioulnar joint instability, ulnar impaction, and degenerative changes in the carpus and triangular fibrocartilage complex. Advanced imaging aids in the evaluation and mapping of a physeal bar. Treatment options for distal radius physeal bars include observation, bar resection±interposition, epiphysiodeses of the ulna±completion epiphysiodesis of the radius, ulnar shortening osteotomy±diagnostic arthroscopy to manage associated triangular fibrocartilage complex pathology, radius osteotomy, and distraction osteogenesis.

CONCLUSIONS

Decision-making when presented with a distal radius physeal bar is multifactorial and should incorporate the age and remaining growth potential of the patient, the size and location of the bar, and patient and family expectations.

Biomechanics of the Distal Radioulnar Joint During In Vivo Forearm Pronosupination

Background  Ulnar variance (UV) and center of rotation (COR) location at the level of the distal radioulnar joint (DRUJ) change with forearm rotation. Nevertheless, these parameters have not been assessed dynamically during active in vivo pronosupination. This assessment could help us to improve our diagnosis and treatment strategies. Questions/purposes  We sought to (1) mathematically model the UV change, and (2) determine the dynamic COR's location during active pronosupination. Methods  We used biplanar videoradiography to study DRUJ during in vivo pronation and supination in nine healthy subjects. UV was defined as the proximal-distal distance of ulnar fovea with respect to the radial sigmoid notch, and COR was calculated using helical axis of motion parameters. The continuous change of UV was evaluated using a generalized linear regression model. Results  A second-degree polynomial with R 2 of 0.85 was able to model the UV changes. Maximum negative UV occurred at 38.0 degrees supination and maximum positive UV occurred at maximum pronation. At maximum pronation, the COR was located 0.5 ± 1.8 mm ulnarly and 0.6 ± 0.8 mm volarly from the center of the ulnar fovea, while at maximum supination, the COR was located 0.2 ± 0.6 mm radially and 2.0 ± 0.5 mm volarly. Conclusion  Changes in UV and volar translation of the COR are nonlinear at the DRUJ during pronosupination. Clinical Relevance  Understanding the dynamic nature of UV as a function of pronosupination can help guide accurate evaluation and treatment of wrist pathology where the UV is an important consideration. The dynamic behavior of COR might be useful in designing DRUJ replacement implants to match the anatomical motion.

Morphology at the Distal Radioulnar Joint: Identifying the Prevalence of Reverse Obliquity

Background  Recent advances in the understanding of ulnar-sided wrist pathologies such as ulnar abutment syndrome (UAS) have brought increased attention to the anatomy of the distal radioulnar joint (DRUJ). Previous work established three anatomical variants of the sigmoid notch (parallel, oblique, and reverse oblique). The reverse oblique DRUJ poses theoretical risk of increased contact forces following ulnar shortening osteotomy, a common method of treating UAS. Purpose  As prevalence of reverse oblique morphology has been under-reported, this study aims to better define the prevalence of reverse oblique morphology in the adult population. Methods  Institutional Review Board-approved review of 1,000 radiographs over a 2-year period was performed. Demographic data and radiographic measurements were recorded (ulnar variance, notch inclination, and presence of arthritis). Correlation tests, a test of proportions, a t -test, and linear and logic regression tests were used to examine associations between ulnar variance, sigmoid inclination, sex, age, and presence of arthritis. Results  One thousand radiographs were analyzed revealing prevalence rates of: parallel-68%, oblique-26%, and reverse oblique-6%. Females were significantly more likely to have reverse inclination. No significant correlation was noted for morphology by age. Ulna positive variance was negatively correlated with reverse inclination. DRUJ arthritis was noted in 14% of patients. Higher sigmoid inclination was associated with higher odds of presence of arthritis, adjusting for sex and age. Higher incidence of arthritis was noted among patients with the oblique (20.8%) or reverse oblique (24.6%) compared with parallel (10.5%) morphology. Conclusion  This series of 1,000 radiographs demonstrates a 6% overall prevalence of reverse obliquity. This large dataset allows for better quantification of the prevalence of DRUJ morphologies and determination of correlations that have clinical implications for patients with ulnar-sided wrist pathology. Level of Evidence  This is a Level IV study.

Radial Reference Points for Measuring Palmar Tilt and Ulnar Variance on Lateral Wrist Radiographs

Background: Palmar tilt and ulnar variance are crucial parameters for evaluating the distal radius. Identifying suitable reference points for these parameters on lateral wrist radiographs remains challenging. The purpose of this study was to establish reference points for measuring palmar tilt and ulnar variance on lateral wrist radiographs and to evaluate the reliability of these two parameters using the newly defined reference points. Methods: The distal articular surfaces of 25 cadaver radii were marked at four different locations using thin wires. These bones were radiographed and constant landmarks were recorded. The reliability of the palmar tilt and ulnar variance measurements was assessed using the new reference points and two serial measurements recorded by three observers on 27 standardized lateral wrist radiographs. Results: The reference points for palmar tilt on lateral radiograph were the dorsal and volar end points of the subchondral line. The subchondral line was connected to two of five metaphyseal cortical lines. The reference point for lateral ulnar variance was easily defined on the midpoint of the proximal aspect of the subchondral line. The corresponding posteroanterior central reference point for ulnar variance was at the ulnar corner of the subchondral line. Inter- and intra-observer reliabilities were overall good for the palmar tilt measurements, and excellent for the ulnar variance measurements. Conclusions: Palmar tilt can be determined accurately with a good understanding of the radiographic landmarks on lateral radiographs, and by addressing the problems caused by ulnar inclination of the articular surface of the distal radius. Lateral wrist radiographs can provide a complete picture of the ulnar border of the radius for measuring ulnar variance.

Wrist Injuries in Tennis Players: A Narrative Review

The wrist/hand complex forms the crucial final link in the kinetic chain between the body and the racquet and therefore has a number of important roles in the production of all tennis strokes. However, the internal and external loads that are created at the wrist during these strokes have the potential to contribute to pain and injury. Therefore, the purposes of this narrative review are to (1) determine the extent of the problem of wrist pain/injury in tennis players, (2) identify bony and soft tissue structures of the wrist that are susceptible to damage as a result of tennis play and (3) explore factors that may influence the development of wrist pain/injury in tennis players. The epidemiological data revealed two important points. First, some evidence suggests wrist pain/injury accounts for a higher percentage of total injuries in more recent studies (2014-2015) than in early studies (1986-1995). Second, the relative frequency of wrist pain/injury compared with other well-recognized problem areas for tennis players such as the shoulder complex, elbow and lumbar spine is noticeably higher in more recent studies (2014-2015) than in early studies (1986-1995), particularly among females. Collectively, this would seem to indicate that the problem of wrist pain/injury has increased in the modern game. In fact, some wrist injuries appear to be related to the use of certain forehand grip types and the predominant use of the two-handed backhand. While the loads experienced at the wrist during tennis stroke production seem to be below threshold levels for a single event, the cumulative effects of these loads through repetition would appear to be an important consideration, especially when inadequate time is allowed to complete normal processes of repair and adaptation. This is supported by the evidence that most wrist injuries in tennis are associated with overuse and a chronic time course. The complex interaction between load, repetition, and training practices in tennis, particularly among young developing players who choose a path of early specialization, needs to be further explored.

A finite element model to investigate the effect of ulnar variance on distal radioulnar joint mechanics

Ulnocarpal impaction syndrome involves excessive loading of the ulnocarpal joint. Ulnar shortening osteotomies are an effective way to reduce ulnocarpal loading but alter contact mechanics at the distal radioulnar joint (DRUJ). This study used a computational model to investigate the relationship between ulnar length and DRUJ mechanics. Detailed, finite element models of the radius and ulna bones were constructed from magnetic resonance imaging data. The length of the ulna bone model was increased and decreased up to 5 mm in 1 mm increments. A computational model was used to predict joint contact at the DRUJ for each ulnar length. Lengthening the ulna caused a slight decrease in DRUJ contact pressure, with a more substantial decrease in contact area. Shortening the ulna caused a substantial increase in contact area, with a smaller increase in DRUJ contact pressure. The location of contact on the radial sigmoid notch changed with 2 mm lengthening and 3 mm shortening. The results of this study demonstrate the sensitivity of DRUJ contact to ulnar length changes, which may explain the DRUJ cartilage degeneration that often follows ulnar osteotomies. The joint contact model implemented in this study allowed the relationship between ulnar length and DRUJ contact to be examined systematically, in a way that is difficult to achieve through cadaveric experimentation. The results confirmed published experimental data showing an increased DRUJ contact pressure with ulnar shortening. It is important that clinicians consider the influence of ulnar osteotomies, not only on ulnocarpal loading but also on DRUJ mechanics. Copyright © 2016 John Wiley & Sons, Ltd.

The Oblique Metaphyseal Shortening Osteotomy of the Distal Ulna: Surgical Technique and Results of Ten Patients

Background Ulnocarpal abutment is a common condition following distal radius fractures. There are different surgical methods of treatment for this pathology: open and arthroscopic wafer procedure or an ulnar shortening osteotomy. We describe an oblique metaphyseal shortening osteotomy of the distal ulna using two cannulated headless compression screws. We report the results of 10 patients treated with this method. Materials and Methods Out of 17 patients, 10 could be reviewed retrospectively for this study. Patient-rated outcomes were measured using the VAS (visual analogue scale) for pain, PRWHE (patient-rated wrist and hand evaluation) survey, and Quick-DASH (disability of arm, shoulder and hand) survey for functional outcomes. At the review we measured the range of motion (ROM) of the wrist (extension and flexion, ulnar and radial deviation, pronation and supination). Grip strength, pronation, and supination strength of the forearm was measured using a calibrated hydraulic dynamometer. ROM and strength of the affected wrist was compared with ROM and strength of the unaffected wrist. Surgical Procedure Oblique long metaphyseal osteotomy of the distal ulna (from proximal-ulnar to distal-radial), fixed with two cannulated headless compression screws. Results The average postoperative VAS score for pain was 23.71 (standard deviation [SD] of 30.41). The average postoperative PRWHE score was 32.55 (SD of 26.28). The average postoperative Quick-DASH score was 28.65 (SD of 27.21). The majority of patients had a comparable ROM and strength between the operated side and the non-operated side. Conclusion This surgical technique has the advantage of reducing the amount of hardware and to decrease the potential hinder caused by it on medium term. Moreover, the incision remains smaller, and the anatomic metaphyseal localization of the osteotomy potentially allows a better and rapid healing.

Radiological characteristics of Kienböck's disease in the Korean population

PURPOSE

In Kienböck's disease, the wrist displays certain characteristic radiological parameters, which have been reported to differ among countries. In the present study, we aimed to identify specific radiological parameters of the unaffected wrists in patients with unilateral Kienböck's disease and to determine the extent of the association of each parameter with the disease in Korea.

METHODS

This retrospective case-control study assessed the radiological parameters of patients with Kienböck's disease ( n = 53) and controls ( n = 53), who visited our institution between January 2000 and May 2013. Ulnar variance (UV), radial inclination, lunate fossa inclination, lunate diameter, lunate height, lunate tilting angle (LTA), lunate covering index (LCI), and Ståhl index (SI) were measured and analyzed using a binary logistic regression model.

RESULTS

We observed that wrists with a high LTA and LCI, and low UV and SI had a tendency to develop Kienböck's disease.

CONCLUSION

In the Korean population, a high LTA and LCI, and low UV and SI of the unaffected wrists on plain radiography might be associated with Kienböck's disease. The radiographic characteristics of the unaffected wrists can differ between patients with unilateral Kienböck's disease and normal individuals.

Inter- and intrarater reliability of ulna variance versus lunate subsidence measurements in Madelung deformity

PURPOSE

To assess inter- and intrarater reliability of both ulna variance and lunate subsidence measurement methods in a large consecutive series of children with Madelung deformity.

METHODS

Ulnar variance and lunate subsidence were measured on 41 standard anteroposterior wrist radiographs from 31 patients with Madelung deformity. The patients had a mean age of 13 years (range, 5-25) at the time of presentation. Two pediatric orthopedic hand/upper limb surgeons evaluated all radiographs twice in a 4-week interval using standard digital imaging software. Intraclass correlation coefficients (ICCs) were calculated for inter- and intrarater reliability, and results were reported using the Landis and Koch criteria.

RESULTS

The interrater ICC for the ulna variance measurements was substantial, and for the lunate subsidence almost perfect. The intrarater ICC for ulna variance was substantial for both raters. In contrast, the intrarater ICC for lunate subsidence was almost perfect for both raters.

CONCLUSIONS

Measurement of lunate subsidence showed both superior interrater and intrarater reliability compared with the ulnar variance method. Whenever relative ulna length is assessed in children and adolescents with Madelung deformity, the lunate subsidence should be the preferred method to characterize deformity.

Intra-operative correction of volar tilt of distal radius fractures using volar locking plate as reduction tool: review of 24 cases

In surgical fixation of distal radius fractures with metaphyseal comminution, volar tilt can be restored using an anatomical volar locking plate as a reduction tool. The purpose of our study is to assess the degree of over or under correction of volar tilt that can result with our 'lift' technique and to determine the ratio between theoretical and actual angular correction. We retrospectively reviewed 24 patients who underwent distal radius fracture fixation using this technique and assessed intra-operative radiographs for parameters including pre-'lift' and post-'lift' volar tilt and pre-'lift' plate-shaft angles. The ratio between actual angular correction and theoretical angular correction was calculated. The 'lift' technique is found to be reliable in restoring volar tilt in most fractures. Over- or under-correction does occur due to errors in visual estimation and actual angular correction is generally less than the theoretical angular correction.

The effect of supination and pronation on wrist range of motion

Wrist range of motion (ROM) is a combination of complex osseous articulations and intricate soft tissue constraints. It has been proposed that forearm rotation contributes significantly to carpal kinematics. However, no studies have investigated whether supination or pronation influence this course of motion. The purpose of this study is to examine whether supination and pronation affect the mechanical axis of the wrist. After being screened for gross anatomic abnormalities, six upper extremity cadaver specimens (three matched pairs) were fixed to a custom-designed jig that allows 24 different directions of wrist motion. Each specimen was tested in three separate forearm positions: neutral, full supination, and full pronation. Moments of ± 2 Nm were applied, and the applied moment versus wrist rotation data were recorded. Forearm position did not significantly (p > 0.31) affect the ROM values of the wrist. In forearm neutral, supination, and pronation positions the envelope of wrist ROM values was ellipsoidal in shape, consistent with prior neutral forearm biomechanical testing. The major axis of the ellipse was oriented in a radial extension to ulnar flexion direction, with the largest ROM in ulnar flexion. We hypothesized that forearm position would influence wrist ROM. However, our biomechanical testing showed no statistically significant difference in the orientation of the mechanical axis nor the passive ROM of the wrist. The primary passive mechanical axis in all three forearm positions tested (neutral, supination, and pronation) was aligned with radial extension and ulnar flexion. Although it has been shown that forearm position affects various radioulnar, radiocarpal, and ulnocarpal ligamentous tensions and lengths, it appears that wrist ROM is independent of forearm position. Consequently we feel our biomechanical testing illustrates that wrist ROM is primarily dependent on the osseous articulations of the carpus. Additionally, given that no change is observed in wrist ROM relative to forearm position, the significance of the contribution of the distal radioulnar joint (DRUJ) to wrist kinematics is debatable.

Ulnar shortening osteotomy for distal radius malunion

Background Malunion is a common complication of distal radius fractures. Ulnar shortening osteotomy (USO) may be an effective treatment for distal radius malunion when appropriate indications are observed. Methods The use of USO for treatment of distal radius fracture malunion is described for older patients (typically patients >50 years) with dorsal or volar tilt less than 20 degrees and no carpal malalignment or intercarpal or distal radioulnar joint (DRUJ) arthritis. Description of Technique Preoperative radiographs are examined to ensure there are no contraindications to ulnar shortening osteotomy. The neutral posteroanterior (PA) radiograph is used to measure ulnar variance and to estimate the amount of ulnar shortening required. An ulnar, mid-sagittal incision is used and the dorsal sensory branch of the ulnar nerve is preserved. An USO-specific plating system with cutting jig is used to create parallel oblique osteotomies to facilitate shortening. Intraoperative fluoroscopy and clinical range of motion are checked to ensure adequate shortening and congruous reduction of the ulnar head within the sigmoid notch. Results Previous outcomes evaluation of USO has demonstrated improvement in functional activities, including average flexion-extension and pronosupination motions, and patient reported outcomes. Conclusion The concept and technique of USO are reviewed for the treatment of distal radius malunion when specific indications are observed. Careful attention to detail related to surgical indications and to surgical technique typically will improve range of motion, pain scores, and patient-reported outcomes and will reduce the inherent risks of the procedure, such as ulnar nonunion or the symptoms related to unrecognized joint arthritis.

LEVEL OF EVIDENCE

 Level IV.

Physeal arrest of the distal radius

Fractures of the distal radius are among the most common pediatric fractures. Although most of these fractures heal without complication, some result in partial or complete physeal arrest. The risk of physeal arrest can be reduced by avoiding known risk factors during fracture management, including multiple attempts at fracture reduction. Athletes may place substantial compressive and shear forces across the distal radial physes, making them prone to growth arrest. Timely recognition of physeal arrest can allow for more predictable procedures to be performed, such as distal ulnar epiphysiodesis. In cases of partial arrest, physeal bar excision with interposition grafting can be performed. Once ulnar abutment is present, more invasive procedures may be required, including ulnar shortening osteotomy or radial lengthening.

Radiographic outcomes of volar locked plating for distal radius fractures

PURPOSE

To assess the ability of volar locked plating to achieve and maintain normal radiographic parameters for articular stepoff, volar tilt, radial inclination, ulnar variance, and radial height in distal radius fractures.

METHODS

We performed a retrospective review of 185 distal radius fractures that underwent volar locked plating with a single plate design over a 5-year period. We reviewed radiographs and recorded measurements for volar tilt, radial inclination, ulnar variance, radial height, and articular stepoff. We used logistic regression to determine the association between return to radiographic standard norms and fracture type.

RESULTS

At the first and final postoperative follow-up visits, we observed articular congruence less than 2 mm in 92% of fractures at both times. Normal volar tilt (11°) was restored in 46% at the first follow-up and 48% at the final one. Radial inclination (22°) was achieved in 44% at the first follow-up and 43% at the final one, and ulnar variance (01 ± 2 mm) was achieved in 53% at the first follow-up and 53% at the final one. In addition, radial height (14 ± 1mm) was restored in 14% at the first follow-up and 12% at the final one. More complex, intra-articular fractures (AO class B and C and Frykman types 3, 4, 7, and 8) were less likely to be restored to normal radiographic parameters. However, because of the small sample size for some fracture types, it was difficult to discover significant associations between fracture type and radiographic outcome.

CONCLUSIONS

Volar locked plating for distal radius fractures achieved articular stepoff less than 2 mm in most fractures but only restored and maintained normal radiographic measurements for volar tilt, radial inclination, and ulnar variance in 50% of fractures. The ability of volar locked plating to restore and maintain ulnar variance and volar tilt decreased with more complex intra-articular fracture types.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

The Essex-Lopresti lesion

The Essex-Lopresti lesion represents a severe injury of the forearm unit. In the 1940s, it’s pathology and consequences have already been mentioned by several authors. Over the course of time, the pathophysiology of the lesion was displayed in more detail. Therefore, an intensive analysis of the involved anatomic structures was done. The interosseous membrane was shown to play a major role in stabilising the forearm unit, in the situation of a fractured radial head, which is the primary stabiliser of the longitudinal forearm stability. Moreover, biomechanical analyses showed a relevant attribution of the distal radio-ulnar joint to the forearm stability. If, in the case of a full-blown Essex-Lopresti lesion, the radial head, the interosseous membrane and the distal radio-ulnar joint are injured, proximalisation of the radius will take place and will come along with secondary symptoms at the elbow joint and the wrist. According to actual studies, the lesion seems to occur more often than realised up to now. Thus, to avoid missing the complex injury, subtle clinical diagnosis combined with adequate imaging has to be undertaken. If the lesion is confirmed, several operative treatment options are available, yet not proofed to be sufficient.

Conservative treatment of the distal radius fracture using thermoplastic splint: pilot study results

INTRODUCTION

Fractures of the distal radius are common accounting for approximately one-sixth of all fractures treated in the emergency room. This study reviews a series of patients with stable distal radius fractures who have been treated with thermoplastic splint.

METHODS

This study was undertaken between November 2009 and May 2010 in a single orthopaedic fracture outpatient clinic. All patients had undisplaced or minimally displaced distal radius fractures. Children and open fractures were excluded. Patients had been reviewed in the outpatients with radiographs on 1, 2, 6 and 12 weeks after injury. Skin condition and satisfaction were assessed on splint removal. Radiological parameters of radial inclination, radial length and palmer tilt were measured.

RESULTS

In total, 26 patients were treated with the splint. The average age of the patients was 45.1 (range, 21-73), and male/female ratio was 12:14. On average, the splint was removed at 5.1 weeks (mode = 6 weeks). The right- to left-side ratio was 11:15. Eleven of those fractures were on the dominant side. There was no significant difference in the radiological outcomes pre- and post-splinting. Nearly all patients had been satisfied with the splint. Two patients had minor cast complications whilst 23 patients were able to shower whilst in splint.

CONCLUSION

Patients treated with thermoplastic splint showed no deterioration in their radiological outcomes. Nearly all the patients had been satisfied with the splint.

Management of forearm deformities with ulnar shortening more than 15 mm caused by hereditary multiple osteochondromas

BACKGROUND

Treatment for forearm deformities caused by hereditary multiple osteochondromas is still controversial. The purpose of the study was to describe the outcome of treatment with the combined use of ulnar lengthening and excision of osteochondromas.

METHODS

Fourteen patients with hereditary multiple osteochondromas had forearm deformities which belongs to type I Masada deformity. The mean relative ulnar shortening was 19.9 mm (range, 16-23). All patients ranging from 4 to 15 years old had operative treatment. Clinical evaluation involving the assessment of pain, activities of daily living, and range of motion of the wrist and forearm was performed. The radiographic evaluation was relative ulnar shortening (RUS), radial articular angle (RAA), carpal slip (CS), and radial bowing. Besides, we also evaluated the amount of ulnar lengthening, external fixation time, and external fixation index.

RESULTS

The mean EFT was 101 days (range, 84-133), and the mean external fixation index was 44.4 days/cm (range, 33.6-51.2). During the mean 43.1 months follow-up, four patients had mild pain and two patients had mild restriction of daily activities. The rotation of forearm and motion of wrist had increased except in Case 3. The RAA, CS, and radial bowing had been improved except in Case 6 and 7. In all patients, relative ulnar shortening had been corrected. According to the functional evaluation criteria recommended by Krimmer, there were ten excellent and four good.

CONCLUSIONS

The combined use of ulna lengthening and excision of osteochondromas is a proper and effective treatment method to the type I Masada deformity with the relative ulnar shortening more than 15 mm.

Distal metaphyseal ulnar-shortening osteotomy: surgical technique

Ulnar impaction is a common condition encountered by hand surgeons. Historically, treatment of this condition has been with wafer resection of the distal ulna, by either open or arthroscopic means, or diaphyseal ulnar shortening osteotomy; however, both of these have the potential for prolonged recovery or a need for additional procedures. Wafer procedures, whether done by open or arthroscopic techniques, can result in hemarthrosis, and diaphyseal osteotomies can require hardware removal. Recently, Slade and Gillon described a technique of ulnar shortening in the osteochondral region of the ulnar head, which offers advantages over previously used techniques. The purpose of this manuscript is to describe this technique, as well as pearls and pitfalls associated with the procedure. To more accurately describe the location of the osteotomy, we have changed the name of the procedure from Dr. Slade's original description to distal metaphyseal ulnar-shortening osteotomy.

Anatomy and biomechanics of the distal radioulnar joint

The distal radioulnar joint (DRUJ) is a complex articulation allowing significant rotational and translational motion. Stability of the DRUJ depends on bony contact, intrinsic stabilizers of the triangular fibrocartilage complex, and extrinsic stabilizers of the distal forearm. Understanding the anatomy of this articulation is paramount in clinical decision making for the treatment of disorders involving the DRUJ.

Long-term outcomes of ulnar shortening osteotomy for idiopathic ulnar impaction syndrome: at least 5-years follow-up

Background

There have been few outcomes studies with follow-up after performing ulnar shortening osteotomy for ulnar impaction syndrome. We investigated the long-term clinical and radiological outcomes of ulnar shortening osteotomy for the treatment of idiopathic ulnar impaction syndrome.

Methods

We retrospectively reviewed 36 patients who had undergone ulnar shortening osteotomy for idiopathic ulnar impaction syndrome for a mean follow-up of 79.1 months (range, 62 to 132 months). The modified Gartland and Werley scores were measured pre- and postoperatively. The radiographic parameters for the assessment of the distal radioulnar joint (DRUJ) as well as the relationship between these radiographic parameters and the clinical and radiological outcomes were determined.

Results

The average modified Gartland and Werley wrist score improved from 65.5 ± 8.1 preoperatively to 93.4 ± 5.8 at the last follow-up visit. The average preoperative ulnar variance of 4.7 ± 2.0 mm was reduced to an average of -0.6 ± 1.4 mm postoperatively. Osteoarthritic changes of the DRUJ were first seen at 34.8 ± 11.1 months follow-up in 6 of 36 wrists (16.7%). Those who had osteoarthritic changes in the DRUJ had significantly wider preoperative ulnar variance, a longer distal radioulnar distance and a greater length of ulnar shortening, but the wrist scores of the patients who had osteoarthritic changes in the DRUJ were comparable to those who did not have osteoarthritic changes in the DRUJ.

Conclusions

The clinical outcomes are satisfactory for even more than 5 years after ulnar shortening osteotomy for treating idiopathic ulnar impaction syndrome despite the osteoarthritic changes of the DRUJ. The patients who need a larger degree of ulnar shortening may develop DRUJ arthritis.

Ulnar impaction

Ulnar impaction syndrome is a common source of ulnar-sided wrist pain. It is a degenerative condition that occurs secondary to excessive load across the ulnocarpal joint, resulting in a spectrum of pathologic changes and symptoms. It may occur in any wrist but is usually associated with positive ulnar variance, whether congenital or acquired. The diagnosis of ulnar impaction syndrome is made by clinical examination and is supported by radiographic studies. Surgery is indicated if nonoperative treatment fails. Although a number of alternatives exist, the 2 primary surgical options are ulnar-shortening osteotomy or partial resection of the distal dome of the ulna (wafer procedure). This article discusses the etiology of ulnar impaction syndrome, and its diagnosis and treatment.

The relationship between stress positions and pain intensity in triangular fibrocartilage lesions

We investigated the relationship between stress applied in several positions of the wrist and pain intensity in triangular fibrocartilage lesions in sixty-one patients who were diagnosed as having triangular fibrocartilage lesions and had a wrist arthroscopy. Before arthroscopy, we stressed the wrist with an axial load applied in four different wrist positions, and the evoked pain was graded into four levels. The patients who had a triangular fibrocartilage lesion on arthroscopy were divided into those with a traumatic tear and those with degenerative changes. While hypersupination and extension of wrist position evoked the most severe pain in patients with a traumatic tear, the intensity of pain did not relate to wrist rotation in patients with degenerative changes.

Management of peripheral triangular fibrocartilage complex tears in the ulnar positive patient: arthroscopic repair versus ulnar shortening osteotomy

PURPOSE

One pattern of injury to the triangular fibrocartilage complex (TFCC) is a traumatic peripheral tear located at the ulnar end of the TFCC. Since 1989, this specific injury has been classified as a Palmer type 1B lesion. Various treatment options have been described for 1B injuries, yet when there is coexistent ulnar positive variance, it can make the choice of treatment difficult. The purpose of this article is to help the surgeon decide how to treat type 1B lesions in ulnar positive patients by directly comparing arthroscopic repair (repair) to ulnar shortening osteotomy (USO). The null hypothesis was that repair and USO would provide equivalent postoperative improvement with regard to motion; Disability of the Arm, Shoulder, and Hand (DASH) score; visual analog scale (VAS) score; and grip strength.

METHODS

We tested our hypothesis by retrospectively reviewing prospectively collected data from 51 patients treated surgically between 2000 and 2006 with type 1B tears in the setting of ulnar positive variance. Of these 51 patients, 27 were treated with arthroscopic repair and 24 with USO. All patients were evaluated before surgery as well as at final follow-up for active range of motion measurements, grip strength, DASH score, and VAS score. Radiographs were taken of all patients before surgery to confirm the presence of ulnar positive variance, and after surgery in the USO group to evaluate for bony union.

RESULTS

At the final follow-up, we found no statistically significant difference between the repair and USO groups with regard to flexion, extension, pronation, supination, radial deviation, or ulnar deviation. Likewise, there was no significant difference in grip strength, DASH scores, or VAS scores. When analyzing each cohort individually, both groups improved significantly after surgery with regard to DASH score, VAS score, and wrist extension. There was also a trend toward improved motion in all other directions except for an insignificant decrease in postoperative pronation in the repair group. Two patients in the USO group required additional surgery, with one revision performed for nonunion and one for painful hardware, which caused extensor carpi ulnaris tendonitis.

CONCLUSIONS

The results of our study suggest that type 1B TFCC tears in the ulnar positive patient can be managed equivalently well with repair or USO.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic III.

Measurement of ulnar variance on uncalibrated digital radiographic images

Uncalibrated digital radiographs used in multicenter trials hinder quantitative measures such as articular step and ulnar variance. This investigation tested the reliability of alternative measures of ulnar variance that are scaled to the length of the capitate. A sample of 30 sets of radiographs from patients enrolled in a prospective study of operative treatment of fractures of the distal radius were blinded and randomized. Five observers measured the ulnar variance (UV) and longitudinal length of the capitate (CH) on two separate occasions with greater than 2 weeks between measurements. During each measurement session, the observers made the measurements on both a calibrated and a noncalibrated workstation. The ratio of the ulnar variance to the length of capitate was calculated (UV/CH ratio). Paired t tests were used to compare two rounds of measurements for both methods. Intra- and interobserver reliability was assessed by the Pearson product-moment correlation coefficients. The ratios were compared using analysis of variance with a Bonferroni correction. The intraobserver reliability was excellent for each of the three variables (UV, CH, UV/CH ratio) for each workstation. The interobserver reliability of the UV/CH ratios obtained for each workstation was moderate to excellent as judged by the Pearson correlations between observers. The Bland-Altman method indicated a mean difference in UV/CH between calibrated and uncalibrated measurement techniques of 0.002 with limits of agreement of -0.11 to 0.11. Measurements of ulnar variance that are scaled to the length of the capitate may be useful measures of deformity in studies that utilize uncalibrated digital radiographs.

Ageing does not affect ulnar variance: an investigation in Taiwan

This paper presents a longitudinal study of the effect of ageing on ulnar variance. Between 1976 and 1985, ulnar variance in 1000 normal adult subjects was measured using the Palmer method. In 1995 to 2002, 17 to 22 years later, the ulnar variance was measured again in 864 of them. They were stratified into three age groups: Group I consisted of 351 subjects of young age (20-39 year-old), Group II of 318 subjects of middle age (40-59 year-old) and group III of 195 subjects of old age (60 year-old or older). The means of the initial and the final ulnar variance of the whole series and the three groups were compared by the paired Student's t-test. There were no significant differences between the initial and final ulnar variances in all three age groups and in the whole series. In normal subjects without diseases or injuries affecting the wrist, ageing does not affect the ulnar variance.

Stress injury of the lunate in tennis players: a case series and related biomechanical considerations

OBJECTIVE

To investigate clinical and imaging differential diagnosis and tennis stroke biomechanics potentially involved in lunate stress injury pathogenesis.

METHODS

The present report describes five competitive tennis players with overuse-related dorsal wrist pain assessed by magnetic resonance imaging.

RESULTS

Magnetic resonance imaging revealed the presence of lunate stress injury. All players were treated conservatively, with symptom resolution and complete functional recovery achieved at 14 weeks.

CONCLUSIONS

Lunate stress injuries should be considered in the differential diagnosis of overuse-related dorsal wrist pain in tennis players.

Ulnar shortening osteotomy in idiopathic ulnar impaction syndrome

BACKGROUND

Idiopathic ulnar impaction syndrome can be defined as a degenerative condition of the ulnar aspect of the wrist in patients with congenital or dynamic positive ulnar variance without a history of fracture or premature physeal arrest. The purpose of this study was to evaluate the clinical features of idiopathic ulnar impaction syndrome and the outcomes of ulnar shortening osteotomy for this group of patients.

METHODS

Thirty-one wrists in twenty-nine patients with idiopathic ulnar impaction syndrome were treated with an ulnar shortening osteotomy. Ulnar variance was measured on an anteroposterior radiograph of the wrist, and radioulnar distance was measured on a lateral radiograph, with the forearm in neutral rotation, to evaluate any displacement of the ulnar head from the distal aspect of the radius. All patients were followed clinically and radiographically for a mean of thirty-two months.

RESULTS

An average preoperative ulnar variance of +4.6 mm (range, 2 to 7.5 mm) was reduced to an average of -0.7 mm (range, -4 to +1 mm) postoperatively. Preoperatively, the modified Gartland and Werley score was an average (and standard deviation) of 69.5 +/- 7.6, with twenty-four wrists rated poor and seven rated fair. Postoperatively, the score improved to an average of 92.5 +/- 8.0, with twenty-four wrists rated excellent; five, good; one, fair; and one, poor. Dorsal subluxation of the distal aspect of the ulna was found concomitantly in nine wrists, and it was found to be reduced by the shortening osteotomy. Seven patients had cystic changes in the carpal bones preoperatively, but these were not evident one to two years after the operation.

CONCLUSIONS

Ulnar shortening osteotomy improved wrist function in patients with idiopathic ulnar impaction syndrome and reduced the subluxation of the distal radioulnar joint, which is commonly found in these patients. Degenerative cystic changes of the ulnar carpal bones appear to resolve following the shortening osteotomy.