A comparison of polyethylene wear rates between cemented and cementless cups

Analysis of the Risk of Wear on Cemented and Uncemented Polyethylene Liners According to Different Variables in Hip Arthroplasty

Wear debris in total hip arthroplasty is one of the main causes of loosening and failure, and the optimal acetabular fixation for primary total hip arthroplasty is still controversial because there is no significant difference between cemented and uncemented types for long-term clinical and functional outcome. To assess and predict, from a theoretical viewpoint, the risk of wear with two types of polyethylene liners, cemented and uncemented, a simulation using the finite element (FE) method was carried out. The risk of wear was analyzed according to different variables: the polyethylene acetabular component’s position with respect to the center of rotation of the hip; the thickness of the polyethylene insert; the material of the femoral head; and the relationship of the cervical–diaphyseal morphology of the proximal end of the femur to the restoration of the femoral offset. In all 72 simulations studied, a difference was observed in favour of a cemented solution with respect to the risk of wear. With regard to the other variables, the acetabular fixation, the thickness of the polyethylene, and the acetabular component positioning were statistically significant. The highest values for the risk of wear corresponded to a smaller thickness (5.3 mm), and super-lateral positioning at 25 mm reached the highest value of the von Mises stress. According to our results, for the reconstruction of the acetabular side, a cemented insert with a thickness of at least 5 mm should be used at the center of rotation.

Comparison of the long-term outcome of cemented Charnley low-friction arthroplasty with hybrid arthroplasty in patients with congenital hip disease

AIMS

To our knowledge, no study has compared the long-term results of cemented and hybrid total hip arthroplasty (THA) in patients with osteoarthritis (OA) secondary to congenital hip disease (CHD). This is a demanding procedure that may require special techniques and implants. Our aim was to compare the long-term outcome of cemented low-friction arthroplasty (LFA) and hybrid THA performed by one surgeon.

PATIENTS AND METHODS

Between January 1989 and December 1997, 58 hips (44 patients; one man, 43 woman; mean age 56.6 years (25 to 77)) with OA secondary to CHD were treated with a cemented Charnley LFA (group A), and 55 hips (39 patients; two men, 37 women; mean age 49.1 years (27 to 70)) were treated with a hybrid THA (group B), by the senior author (GH). The clinical outcome and survivorship were compared.

RESULTS

At all timepoints, group A hips had slightly better survivorship than those in group B without a statistically significant difference, except for the 24-year survival of acetabular components with revision for aseptic loosening as the endpoint, which was slightly worse. The survivorship was only significantly better in group A compared with group B when considering reoperation for any indication as the endpoint, 15 years postoperatively (74% vs 52%, p = 0.018).

CONCLUSION

We concluded that there was not a substantial difference at almost any time in the outcome of cemented Charnley LFAs compared with hybrid THAs when treating patients with OA of the hip secondary to CHD. We believe, however, that after improvements in the design of components used in hybrid THA, this could be the method of choice, as it is technically easier with a shorter operating time. Cite this article: Bone Joint J 2019;101-B:1050-1057.

Osteolysis as it Pertains to Total Hip Arthroplasty

Osteolysis is a long-term complication of total hip arthroplasty (THA). As the projected number of THAs performed annually increases, osteolysis will likely continue to occur. However, because of advancements in prosthesis design, metallurgy, and enhanced bearing surfaces, fewer revision THAs will be linked to osteolysis and aseptic loosening. Despite these improvements, no preventative therapies are currently available for the management of osteolysis other than removing and replacing the source of bearing wear.

Differences in Femoral Head Penetration Between Highly Cross-Linked Polyethylene Cemented Sockets and Uncemented Liners

BACKGROUND

This study aimed at investigating differences in femoral head penetration between highly cross-linked polyethylene (HXLPE) cemented sockets and uncemented liners during 5 years postoperatively.

METHODS

Ninety-six patients (106 hips) with a mean age of 64.4 (range, 35-83) years underwent total hip arthroplasty using a HXLPE cemented socket or liner and were respectively divided into cemented (35 patients [37 hips]) and uncemented (61 patients [69 hips]) groups. Femoral head penetrations were evaluated on both anteroposterior (AP)-view and Lauenstein-view radiographs, and mean polyethylene (PE) wear rates were calculated based on femoral head penetration from 2 to 5 years. Multivariate analyses were performed to assess risk factors for PE wear.

RESULTS

At 5 years postoperatively, the cemented and uncemented groups exhibited proximal direction femoral head penetrations of 0.103 mm and 0.124 mm (P = .226) and anterior direction penetrations of 0.090 mm and 0.151 mm (P = .002), respectively. The corresponding mean PE wear rates were 0.004 mm/y and 0.009 mm/y in the AP-view (P = .286) and 0.005 mm/y and 0.012 mm/y in the Lauenstein-view (P = .168), respectively. Left-side operation and high activity were independent risk factors for PE wear on AP-view.

CONCLUSION

When HXLPE was used, all mean PE wear rates were very low and those of cemented sockets and uncemented liners were very similar. PE particle theory suggests that the occurrence of osteolysis and related aseptic loosening might consequently decrease.

A bias-adjusted evidence synthesis of RCT and observational data: the case of total hip replacement

Evaluation of clinical effectiveness of medical devices differs in some aspects from the evaluation of pharmaceuticals. One of the main challenges identified is lack of robust evidence and a will to make use of experimental and observational studies (OSs) in quantitative evidence synthesis accounting for internal and external biases. Using a case study of total hip replacement to compare the risk of revision of cemented and uncemented implant fixation modalities, we pooled treatment effect estimates from OS and RCTs, and simplified existing methods for bias-adjusted evidence synthesis to enhance practical application. We performed an elicitation exercise using methodological and clinical experts to determine the strength of beliefs about the magnitude of internal and external bias affecting estimates of treatment effect. We incorporated the bias-adjusted treatment effects into a generalized evidence synthesis, calculating both frequentist and Bayesian statistical models. We estimated relative risks as summary effect estimates with 95% confidence/credibility intervals to capture uncertainty. When we compared alternative approaches to synthesizing evidence, we found that the pooled effect size strongly depended on the inclusion of observational data as well as on the use bias-adjusted estimates. We demonstrated the feasibility of using observational studies in meta-analyses to complement RCTs and incorporate evidence from a wider spectrum of clinically relevant studies and healthcare settings. To ensure internal validity, OS data require sufficient correction for confounding and selection bias, either through study design and primary analysis, or by applying post-hoc bias adjustments to the results. © 2017 The Authors. Health Economics published by John Wiley & Sons, Ltd.

Total hip replacement and surface replacement for the treatment of pain and disability resulting from end-stage arthritis of the hip (review of technology appraisal guidance 2 and 44): systematic review and economic evaluation

BACKGROUND

Total hip replacement (THR) involves the replacement of a damaged hip joint with an artificial hip prosthesis. Resurfacing arthroplasty (RS) involves replacement of the joint surface of the femoral head with a metal surface covering.

OBJECTIVES

To undertake clinical effectiveness and cost-effectiveness analysis of different types of THR and RS for the treatment of pain and disability in people with end-stage arthritis of the hip, in particular to compare the clinical effectiveness and cost-effectiveness of (1) different types of primary THR and RS for people in whom both procedures are suitable and (2) different types of primary THR for people who are not suitable for hip RS.

DATA SOURCES

Electronic databases including MEDLINE, EMBASE, The Cochrane Library, Current Controlled Trials and UK Clinical Research Network (UKCRN) Portfolio Database were searched in December 2012, with searches limited to publications from 2008 and sample sizes of ≥ 100 participants. Reference lists and websites of manufacturers and professional organisations were also screened.

REVIEW METHODS

Systematic reviews of the literature were undertaken to appraise the clinical effectiveness and cost-effectiveness of different types of THR and RS for people with end-stage arthritis of the hip. Included randomised controlled trials (RCTs) and systematic reviews were data extracted and risk of bias and methodological quality were independently assessed by two reviewers using the Cochrane Collaboration risk of bias tool and the Assessment of Multiple Systematic Reviews (AMSTAR) tool. A Markov multistate model was developed for the economic evaluation of the technologies. Sensitivity analyses stratified by sex and controlled for age were carried out to assess the robustness of the results.

RESULTS

A total of 2469 records were screened of which 37 were included, representing 16 RCTs and eight systematic reviews. The mean post-THR Harris Hip Score measured at different follow-up times (from 6 months to 10 years) did not differ between THR groups, including between cross-linked polyethylene and traditional polyethylene cup liners (pooled mean difference 2.29, 95% confidence interval -0.88 to 5.45). Five systematic reviews reported evidence on different types of THR (cemented vs. cementless cup fixation and implant articulation materials) but these reviews were inconclusive. Eleven cost-effectiveness studies were included; four provided relevant cost and utility data for the model. Thirty registry studies were included, with no studies reporting better implant survival for RS than for all types of THR. For all analyses, mean costs for RS were higher than those for THR and mean quality-adjusted life-years (QALYs) were lower. The incremental cost-effectiveness ratio for RS was dominated by THR, that is, THR was cheaper and more effective than RS (for a lifetime horizon in the base-case analysis, the incremental cost of RS was £11,284 and the incremental QALYs were -0.0879). For all age and sex groups RS remained clearly dominated by THR. Cost-effectiveness acceptability curves showed that, for all patients, THR was almost 100% cost-effective at any willingness-to-pay level. There were age and sex differences in the populations with different types of THR and variations in revision rates (from 1.6% to 3.5% at 9 years). For the base-case analysis, for all age and sex groups and a lifetime horizon, mean costs for category E (cemented components with a polyethylene-on-ceramic articulation) were slightly lower and mean QALYs for category E were slightly higher than those for all other THR categories in both deterministic and probabilistic analyses. Hence, category E dominated the other four categories. Sensitivity analysis using an age- and sex-adjusted log-normal model demonstrated that, over a lifetime horizon and at a willingness-to-pay threshold of £20,000 per QALY, categories A and E were equally likely (50%) to be cost-effective.

LIMITATIONS

A large proportion of the included studies were inconclusive because of poor reporting, missing data, inconsistent results and/or great uncertainty in the treatment effect estimates. This warrants cautious interpretation of the findings. The evidence on complications was scarce, which may be because of the absence or rarity of these events or because of under-reporting. The poor reporting meant that it was not possible to explore contextual factors that might have influenced study results and also reduced the applicability of the findings to routine clinical practice in the UK. The scope of the review was limited to evidence published in English in 2008 or later, which could be interpreted as a weakness; however, systematic reviews would provide summary evidence for studies published before 2008.

CONCLUSIONS

Compared with THR, revision rates for RS were higher, mean costs for RS were higher and mean QALYs gained were lower; RS was dominated by THR. Similar results were obtained in the deterministic and probabilistic analyses and for all age and sex groups THR was almost 100% cost-effective at any willingness-to-pay level. Revision rates for all types of THR were low. Category A THR (cemented components with a polyethylene-on-metal articulation) was more cost-effective for older age groups. However, across all age-sex groups combined, the mean cost for category E THR (cemented components with a polyethylene-on-ceramic articulation) was slightly lower and the mean QALYs gained were slightly higher. Category E therefore dominated the other four categories. Certain types of THR appeared to confer some benefit, including larger femoral head sizes, use of a cemented cup, use of a cross-linked polyethylene cup liner and a ceramic-on-ceramic as opposed to a metal-on-polyethylene articulation. Further RCTs with long-term follow-up are needed.

STUDY REGISTRATION

This study is registered as PROSPERO CRD42013003924.

FUNDING

The National Institute for Health Research Health Technology Assessment programme.

Early subsidence of shape-closed hip arthroplasty stems is associated with late revision. A systematic review and meta-analysis of 24 RSA studies and 56 survival studies

BACKGROUND AND PURPOSE

Few studies have addressed the association between early migration of femoral stems and late aseptic revision in total hip arthroplasty. We performed a meta-regression analysis on 2 parallel systematic reviews and meta-analyses to determine the association between early migration and late aseptic revision of femoral stems.

PATIENTS AND METHODS

Of the 2 reviews, one covered early migration data obtained from radiostereometric analysis (RSA) studies and the other covered long-term aseptic revision rates obtained from survival studies with endpoint revision for aseptic loosening. Stems were stratified according to the design concept: cemented shape-closed, cemented force-closed, and uncemented. A weighted regression model was used to assess the association between early migration and late aseptic revision, and to correct for confounders. Thresholds for acceptable and unacceptable migration were determined in accordance with the national joint registries (≤ 5% revision at 10 years) and the NICE criteria (≤ 10% revision at 10 years).

RESULTS

24 studies (731 stems) were included in the RSA review and 56 studies (20,599 stems) were included in the survival analysis review. Combining both reviews for the 3 design concepts showed that for every 0.1-mm increase in 2-year subsidence, as measured with RSA, there was a 4% increase in revision rate for the shape-closed stem designs. This association remained after correction for age, sex, diagnosis, hospital type, continent, and study quality. The threshold for acceptable migration of shape-closed designs was defined at 0.15 mm; stems subsiding less than 0.15 mm in 2 years had revision rates of less than 5% at 10 years, while stems exceeding 0.15 mm subsidence had revision rates of more than 5%.

INTERPRETATION

There was a clinically relevant association between early subsidence of shape-closed femoral stems and late revision for aseptic loosening. This association can be used to assess the safety of shape-closed stem designs. The published research is not sufficient to allow us to make any conclusions regarding such an association for the force-closed and uncemented stems.

Empirical support for radiographic review: a follow-up study of total hip arthroplasty

Routine post surgery surveillance of total hip arthroplasty (THA) is widely recommended to identify asymptomatic failure but inclusion of an x-ray adds to service costs. Evidence is needed to support orthopaedic opinion in order to identify what should be included in surveillance. An investigation was conducted to establish whether an x-ray is needed in addition to patient reported outcome measures. One hundred and fifty-four THA had been assessed at 3 years and were reviewed again at 6 to 9 years (mid-term) when radiographic signs of deterioration commonly appear. Data were explored for associations between radiographic changes and changes in the participants' Oxford Hip Score, age, EuroQol 5-D score or comorbidities. Hierarchical multiple regression analysis showed that the number of radiographic changes could not be predicted by any of the other variables. This supports the inclusion of an x-ray in THA surveillance and suggests that the state of the THA cannot be determined by the use of patient reported outcome measures alone. This has implications for future arthroplasty surveillance.

Clinical outcome, survival and polyethylene wear of an uncemented total hip arthroplasty: a 10- to 12-year follow-up study of 81 hips

A complete 10- to 12-year follow-up of an uncemented total hip arthroplasty (THA) was performed regarding survival, clinical outcome, polyethylene wear and influencing factors on wear. Seventy-two patients (75 Mallory Head uncemented THA) with primary osteoarthritis operated on in 1999 or 2000 were included in the survival study. Mean age at the time of operation was 57.9 years (range 37-70). The survival rate after 11.9 years was 96% (95% CI 0.89-1.01). In three cases the acetabular component was revised because of extensive polyethylene wear. Fifty-four patients with 57 THAs were available for clinical and radiological analysis. At a mean follow-up time of 10.7 years (range 10-12) the clinical outcome can be considered comparable to other uncemented THA. Mean polyethylene wear was 1.8mm (range 0.4-3.8) with an annual wear rate of 0.15 mm/y. There was a significant correlation between polyethylene wear and inclination of the cup as well as male gender.

Accelerated polyethylene wear and early failure of the uncemented Reflection acetabular component: a ten to fifteen-year follow-up study

PURPOSE

The Reflection® second-generation uncemented acetabular component was designed to address increased rates of failure observed with the early acetabular designs. However, the reported survivorship of this acetabular component has been conflicting. The aim of this study was to describe the ten to 15-year survivorship and polyethylene wear rate for the uncemented Reflection® acetabular component performed as part of a primary total hip replacement.

METHODS

One hundred and four consecutive Reflection® uncemented acetabular components in 97 patients were identified from a prospective arthroplasty database with a minimum of ten years of follow-up. No patient was lost to follow-up. Mean cohort age was 59.1 years.

RESULTS

There were 24 revisions of the acetabular component. The all-cause survival rate at ten years was 77.2% [95% confidence interval (CI) 73.9-80.5]. Mean linear wear was 0.20 mm [standard deviation (SD) 0.08] per year and the volumetric wear was 106.2 mm(3) per year. At final follow-up, more than half the patients had osteolysis identified around the femoral component. The mean Oxford Hip Score was 35.6 (SD 9.8) at a mean follow-up of 11.9 years, with six (11.1%) excellent, 26 (48.1%) good, 17 (31.5%) fair and five (9.3%) poor outcomes. Despite the fact that more than a third had a fair or poor outcome, only four (7.4%) were not satisfied with their hip.

CONCLUSIONS

Due to the high rate of relatively asymptomatic polyethylene wear and osteolysis associated with this acetabular component, in our department, we now review all surviving patients both clinically and radiographically on an annual basis.

Outcomes at least 10 years after cemented PF® (Zimmer) total hip arthroplasty: 83 cases

INTRODUCTION

Cementless total hip arthroplasty (TKA) is gaining ground over cemented TKA. The objective of this study was to assess survival rates of a cemented THA implant (PF(®), Zimmer), after at least 10 years and to assess changes in acetabular bone structure.

MATERIAL AND METHODS

Eighty-three ceramic-on-polyethylene THA prostheses were implanted between 1998 and 2001. Clinical outcomes were assessed using the Harris hip score and Postel Merle d'Aubigné score. For each hip, radiographs were examined for acetabular radiolucent lines, geodes, and granulomas; in addition, changes in bone structure and trabeculae were assessed comparatively to the other hip and classified from no change to severe osteolysis. Changes in trabeculae served to assess the loads applied to the bone. Polyethylene wear was assessed using the Livermore method.

RESULTS

A single patient was lost to follow-up. At last follow-up, 16 patients had died and six were contacted and had not required revision surgery; the remaining 52 patients (59 THAs) were re-evaluated and none had evidence of loosening. The Harris hip score at last evaluation was 91.6 compared to 60.5 preoperatively. No hips had evidence of acetabular osteolysis. For two hips, the radiographs showed complete acetabular radiolucent lines less than 2mm in width, with no mobilisation. Trabecular distribution was homogeneous with no stress shielding. Mean annual rate of wear was 0.08mm. No instances of femoral component loosening were recorded; granulomas involving no more than five Gruën zones were seen in three cases.

DISCUSSION

This study confirms the reliability of cemented THA, with a 12-year survival rate of 98.3%, in keeping with earlier data. Thus, our results establish that cemented ceramic-on-polyethylene prostheses remain valid options for THA.

LEVEL OF EVIDENCE

IV.

Cemented versus uncemented fixation in total hip replacement: a systematic review and meta-analysis of randomized controlled trials

The optimal method of fixation for primary total hip replacements (THR), particularly fixation with or without the use of cement is still controversial. In a systematic review and metaanalysis of all randomized controlled trials comparing cemented versus uncemented THRS available in the published literature, we found that there is no significant difference between cemented and uncemented THRs in terms of implant survival as measured by the revision rate. Better short-term clinical outcome, particularly an improved pain score can be obtained with cemented fixation. However, the results are unclear for the long-term clinical and functional outcome between the two groups. No difference was evident in the mortality and the post operative complication rate. On the other hand, the radiographic findings were variable and do not seem to correlate with clinical findings as differences in the surgical technique and prosthesis design might be associated with the incidence of osteolysis. We concluded in our review that cemented THR is similar if not superior to uncemented THR, and provides better short term clinical outcomes. Further research, improved methodology and longer follow up are necessary to better define specific subgroups of patients in whom the relative benefits of cemented and uncemented implant fixation can be clearly demonstrated.

Is there evidence for accelerated polyethylene wear in uncemented compared to cemented acetabular components? A systematic review of the literature

Joint arthroplasty registries show an increased rate of aseptic loosening in uncemented acetabular components as compared to cemented acetabular components. Since loosening is associated with particulate wear debris, we postulated that uncemented acetabular components demonstrate a higher polyethylene wear rate than cemented acetabular components in total hip arthroplasty. We performed a systematic review of the peer-reviewed literature, comparing the wear rate in uncemented and cemented acetabular components in total hip arthroplasty. Studies were identified using MEDLINE (PubMed), EMBASE and the Cochrane Central Register of Controlled Trials. Study quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE) approach. The search resulted in 425 papers. After excluding duplicates and selection based on title and abstracts, nine studies were found eligible for further analysis: two randomised controlled trials, and seven observational studies. One randomised controlled trial found a higher polyethylene wear rate in uncemented acetabular components, while the other found no differences. Three out of seven observational studies showed a higher polyethylene wear in uncemented acetabular component fixation; the other four studies did not show any differences in wear rates. The available evidence suggests that a higher annual wear rate may be encountered in uncemented acetabular components as compared to cemented components.

Cemented all-polyethylene acetabular implants vs other forms of acetabular fixation: a systematic review and meta-analysis of randomized controlled trials

The cost of primary total hip replacement products approaches 65% of the total reimbursement. Durability of total hip replacement resides with the acetabular component. This systematic review and meta-analysis determined if the outcomes of durability, function, and adverse events associated with cemented all-polyethylene acetabular components was similar to other acetabular designs, holding other variables constant. Randomized controlled trials only were evaluated. Two independent reviewers collected the data from 6 randomized controlled trials. Appropriate statistical analysis was performed. There was no statistical difference in regard to the outcomes at various time points (≤3, 4-8, and ≥10 years) in the 907 implants evaluated. There does, however, appear to be a trend toward abject failure with cemented all-polyethylene acetabular component implants consistent with findings of increased radiolucencies more than 10 years out. The issue of increased radiolucencies over time and failure with these types of implants bears closer scrutiny.

Total hip arthroplasty: to cement or not to cement the acetabular socket? A critical review of the literature

The optimal method for acetabular socket fixation remains controversial. We present a critical analysis of the current evidence from a systemic literature review of comparative studies, long-term case series, prior literature reviews, meta-analysis, and national arthroplasty registry data for cemented and uncemented acetabular components to determine the respective survivorship rates, overall risk of re-operation, dislocation rates, and wear-related complications. Using contemporary techniques, both cemented and uncemented sockets can yield good long-term results, but our evaluation suggests that the overall/all cause re-operation risk is lower for cemented fixation. Until and unless crosslinked polyethylene (PE) liners or alternative bearings can prove to yield superior outcome in the future, the cemented PE cup remains the gold standard, in all age groups, by which every acetabular component should be compared.

Update--"Big-head": the solution to the problem of hip implant dislocation?

New friction couples, initially intended to limit osteolysis risk due to debris, have enabled larger implant head diameters to be developed to resolve the problem of hip implant dislocation. The Symposium demonstrated that, whatever the configuration, increased head diameter significantly reduced the incidence of dislocation, but that none of the friction couples fulfilled the mechanical and/or biomechanical charge-book for consistently reliable use of large diameter heads. The greatest caution is therefore recommended in their implementation.

In vivo polyethylene wear of bilateral total hip replacements - cemented versus uncemented modular sockets

We assessed polyethylene wear and osteolysis in 15 patients (30 hips) undergoing staged bilateral total hip arthroplasties, who had a cemented arthroplasty on one side and a hybrid arthroplasty on the other. All factors apart from mode of acetabular component fixation were matched. Wear was measured radiographically using Livermore's technique. The mean clinical and radiological follow-up was 11.2 years for the cemented and 10.7 years for the hybrid arthroplasties. Mean annual linear wear rate was 0.09mm/year in the cemented sockets and 0.14mm/year in the uncemented sockets. This difference was statistically significant (p=0.03), confirming previous reports that the rate of polyethylene wear is increased in uncemented sockets. No periacetabular osteolysis was noted. Femoral osteolysis in zone 7 occurred in 3 hybrid arthroplasties. It appears not all patients are equally affected. These results are further discussed.

Is there evidence for a superior method of socket fixation in hip arthroplasty? A systematic review

PURPOSE

Total hip arthroplasty has been a very succesful orthopaedic procedure. The optimal fixation method of the acetabular component however, has not yet been defined.

METHODS

We performed a systematic review using the Medline and Embase databases to find evidence for the superiority of cemented or cementless acetabular components on short- and long-term clinical and radiological parameters. Methodological quality for randomised trials was assessed using the van Tulder checklist, and for the non randomised studies we used the Newcastle-Ottawa quality assessment scale.

RESULTS

Our search strategy revealed 16 randomised controlled trials (RCT) and 19 non RCT studies in which cemented and cementless acetabular components are compared. A best evidence analysis for complications, wear, osteolysis, migration and clinical scores showed no superiority for either cemented or cementless socket in the RCTs. A best evidence analysis for non RCT studies revealed better osteolysis, migration properties and aseptic loosening survival for cementless sockets; however, wear and overall survival favoured the cemented sockets.

CONCLUSIONS

We recommend that an orthopaedic surgeon should choose an established cemented or cementless socket for hip replacement based on patient characteristics, knowledge, experience and preference.

The concentric all-polyethylene Exeter acetabular component in primary total hip replacement

We report the outcome of the flangeless, cemented all-polyethylene Exeter acetabular component at a mean of 14.6 years (10 to 17) after operation. Of the 263 hips in 243 patients, 122 prostheses are still in situ; 112 patients (119 hips) have died, 18 hips have been revised, and three patients (four hips) were lost to follow-up. Radiographs at the final review were available for 110 of the 122 surviving hips. There were acetabular radiolucent lines in 54 hips (49%). Two acetabular components had migrated but neither patient required revision. The Kaplan-Meier survivorship at 15 years with 61 hips at risk with revision for any cause as the endpoint was 89.9% (95% confidence interval (CI) 84.6 to 95.2) and for aseptic loosening of the acetabular component or lysis 91.7% (95% CI 86.6 to 96.8). In 210 hips with a diagnosis of primary osteoarthritis, survivorship with revision for any cause as the endpoint was 93.2% (95% CI 88.1 to 98.3), and for aseptic loosening of the acetabular component 95.0% (95% CI 90.3 to 99.7). The cemented all-polyethylene Exeter acetabular component has an excellent long-term survivorship.

Direct comparison of polyethylene wear in cemented and uncemented acetabular cups

Background

It has been indicated that, in the long term, the rate of wear and the degree of osteolysis observed with uncemented acetabular components are greater than those associated with cemented cups, but most studies which compare the wear characteristics of cementless with cemented cups have used historical controls. We report a direct comparison of wear of a cemented and an uncemented cup with similar design, polyethylene, and sterilization method.

Materials and methods

The study cohort includes 92 patients who were operated in 1997 with primary total hip replacement and have been followed for a period of 9–10 years. All patients were operated by posterolateral approach. In patients 70 years or older we used a cemented cup, in those 60 years or younger we used an uncemented cup, and in patients between 60 and 70 years we used either a cemented or uncemented cup as decided by the surgeon. At follow-up, radiographic imaging was obtained as standard anterioposterior view of the pelvis, and mean wear was determined as described by Livermore et al.

Results

The overall wear of the cemented acetabular components was 1.07 ± 0.78 mm, and that of the uncemented cups was 1.18 ± 0.61 mm (P = 0.529). Wear was significantly associated with male sex (P = 0.003), younger age (P = 0.003), and degree of inclination (P < 0.001), but wear was not significantly associated with cemented versus uncemented cup (P = 0.437).

Conclusion

Our findings in this 9–10-year follow-up study suggest that cementless cups wear no more than cemented cups of similar design.

Long-term outcome of a cementless, hemispherical, press-fit acetabular component: survivorship analysis and dose-response relationship to linear polyethylene wear

Between 1988 and 1998 we implanted 318 total hip replacements (THRs) in 287 patients using the Plasmacup (B. Braun Ltd, Sheffield, United Kingdom) and a conventional metal-on-polyethylene articulation. The main indications for THR were primary or secondary osteoarthritis. At follow-up after a mean 11.6 years (7.6 to 18.4) 17 patients had died and 20 could not be traced leaving a final series of 280 THRs in 250 patients. There were 62 revisions (22.1%) in 59 patients. A total of 43 acetabular shells (15.4%) had been revised and 13 (4.6%) had undergone exchange of the liner. The most frequent indications for revision were osteolysis and aseptic loosening, followed by polyethylene wear. The mean Kaplan-Meier survival of the Plasmacup was 91% at ten years and 58% at 14 years. Osteolysis was found around 36 (17.1%) of the 211 surviving shells. The median annual rate of linear wear in the surviving shells was 0.12 mm/year and 0.25 mm/year in those which had been revised (p < 0.001). Polyethylene wear was a strong independent risk factor for osteolysis and aseptic loosening. The percentage of patients with osteolysis increased proportionately with each quintile of wear-rate. There is a high late rate of failure of the Plasmacup. Patients with the combination of this prosthesis and bearing should be closely monitored after ten years.

The Morscher Press Fit acetabular component: a nine- to 13-year review

We reviewed the results at nine to 13 years of 125 total hip replacements in 113 patients using the monoblock uncemented Morscher press-fit acetabular component. The mean age at the time of operation was 56.9 years (36 to 74). The mean clinical follow-up was 11 years (9.7 to 13.5) and the mean radiological follow-up was 9.4 years (7.7 to 13.1). Three hips were revised, one immediately for instability, one for excessive wear and one for deep infection. No revisions were required for aseptic loosening. A total of eight hips (7.0%) had osteolytic lesions greater than 1 cm, in four around the acetabular component (3.5%). One required bone grafting behind a well-fixed implant. The mean wear rate was 0.11 mm/year (0.06 to 0.78) and was significantly higher in components with a steeper abduction angle. Kaplan-Meier survival curves at 13 years showed survival of 96.8% (95% confidence interval 90.2 to 99.0) for revision for any cause and of 95.7% (95% confidence interval 88.6 to 98.4) for any acetabular re-operation.

Cementless total hip replacement: past, present, and future

Cementless total hip replacement (THR) is rapidly being accepted as the surgery for arthritic diseases of the hip joint. The bone-ingrowth rate in porous-type cementless implants was about 90% over 10 years after surgery, showing that biological fixation of cementless THR was well maintained on both the stem and cup sides. As for the stress shielding of the femur operated using a distal fixation-type stem, severe bone resorption was observed. The severe bone resorption group showed continuous progression for more than 10 years after surgery. Stem loosening directly caused by stress shielding has been considered less likely; however, close attention should be paid to bone resorption-associated disorders including femoral fracture. Cementless cups have several specific problems. It is difficult to decide whether a cup should be placed in the physiological position for the case of acetabular dysplasia by bone grafting or at a relatively higher position without bone grafting. The bone-ingrowth rate was lower in the group with en bloc bone grafting, and the reactive line was frequently noted in the bone-grafted region. Although no data indicated that en bloc bone grafting directly led to poor outcomes, such as loosening, cup placement at a higher site without bone grafting is now selected by most operators. The polyethylene liner in a cementless cup is thinned due to the metal cup thickness; however, it has been suggested that the apparent relation between the cup size and the wear rate was absent as long as a cementless cup is used. Comparative study indicated cementless THR was inferior with regard to the yearly polyethylene wear rate and incidence of osteolysis on both the stem and cup sides. Meta-analysis study on the survival rate between cement and cementless THR reported that cemented THR was slightly superior. It should be considered that specific problems for cementless THR, especially with regard to polyethylene wear, do occur.

A comparison of the outcome of cemented all-polyethylene and cementless metal-backed acetabular sockets in primary total hip arthroplasty

We compared, after a 10-year-minimum follow-up, the outcome of 50 cemented all-polyethylene Charnley acetabular sockets with that of 51 cementless metal-backed sockets in 2 comparable cohorts of young patients. Although the revision rate for the cemented and cementless group was 28% and 35%, respectively, the revision rate for aseptic loosening was 28% for the cemented and 12% for the cementless group. The mean polyethylene wear was 0.112 and 0.114 mm/y, respectively, for the 2 groups. Linear osteolysis was observed in 18 of 50 cemented sockets. Expansile osteolysis presented in 10 of 51 cementless sockets and only in one of the cemented sockets. In conclusion, cementless components had more durable fixation than cemented components. However, they presented more aggressive expansile osteolysis caused by the coexistence of polyethylene and metal debris.

Evaluation of two surgical techniques for acetabular reconstruction in total hip replacement for congenital hip disease: results after a minimum ten-year follow-up

We have evaluated the results of total hip replacement in patients with congenital hip disease using 46 cemented all-polyethylene Charnley acetabular components implanted with the cotyloplasty technique in 34 patients (group A), and compared them with 47 metal-backed cementless acetabular components implanted without bone grafting in 33 patients (group B). Patients in group A were treated between 1988 and 1993 and those in group B between 1990 and 1995. The mean follow-up for group A was 16.6 years (12 to 18) and the mean follow-up for group B was 13.4 years (10 to 16). Revision for aseptic loosening was undertaken in 15 hips (32.6%) in group A and in four hips (8.5%) in group B. When liner exchange was included, a total of 13 hips were revised in group B (27.7%). The mean polyethylene wear was 0.11 mm/yr (0.002 to 0.43) and 0.107 mm/yr (0 to 0.62) for groups A and B, respectively. Polyethylene wear in group A was associated with linear osteolysis, and in group B with expansile osteolysis. In patients with congenital hip disease, when 80% cover of the implant can be obtained, a cementless acetabular component appears to be acceptable and provides durable fixation. However, because of the type of osteolysis arising with these devices, early exchange of a worn liner is recommended before extensive bone loss makes revision surgery more complicated.

Nonmodular flexible press-fit cup in primary total hip arthroplasty: 15-year followup

The key rationale for a nonmodular flexible press-fit cup was to maximize long-term stability with a cementless, porous metal-coated cup that is low in stiffness (no metal shell) and to achieve fixation solely through biradial eccentricity between the cup and the acetabular cavity. We asked whether the promising results achieved at 5 and 10 years would be maintained at 15 years. We reviewed 261 patients who received the first 280 Morscher Press-Fit Cups. One hundred twenty patients (126 hips) died. One hundred one patients (112 hips) had a clinical and radiographic followup after a minimum of 13.5 years (mean, 14.7 years; range, 13.5-17.0 years). Twenty-four patients with 26 hips were clinically examined or interviewed by telephone. Three of the 101 patients were lost to followup. We judged the results excellent or good in 96% of the hips. The 15-year overall survivorship was 95.3% and with the end point of aseptic loosening, the survivorship was 97.5%. Wear was greater in cups with an inclination greater than 45 degrees and in metal-polyethylene pairings compared with ceramic-polyethylene pairings. This cup design performs well over the long term.

Comparison of cemented and uncemented fixation in total hip replacement: a meta-analysis

BACKGROUND

The choice of optimal implant fixation in total hip replacement (THR)--fixation with or without cement--has been the subject of much debate.

METHODS

We performed a systematic review and meta-analysis of the published literature comparing cemented and uncemented fixation in THR.

RESULTS

No advantage was found for either procedure when failure was defined as either: (A) revision of either or both components, or (B) revision of a specific component. No difference was seen between estimates from registry and single-center studies, or between randomized and non-randomized studies. Subgroup analysis of type A studies showed superior survival with cemented fixation in studies including patients of all ages as compared to those that only studied patients 55 years of age or younger. Among type B studies, cemented titanium stems and threaded cups were associated with poor survival. An association was found between difference in survival and year of publication, with uncemented fixation showing relative superiority over time.

INTERPRETATION

While the recent literature suggests that the performance of uncemented implants is improving, cemented fixation continues to outperform uncemented fixation in large subsets of study populations. Our findings summarize the best available evidence qualitatively and quantitatively and provide important information for future research.

Correction of error in two-dimensional wear measurements of cemented hip arthroplasties

The irregularity of individual wear patterns of total hip prostheses seen during patient followup may result partially from differences in radiographic projection of the components between radiographs. A method to adjust for this source of error would increase the value of individual wear curves. We developed and tested a method to correct for this source of error. The influence of patient position on validity of wear measurements was investigated with controlled manipulation of a cadaveric pelvis. Without correction, the error exceeded 0.2 mm if differences in cup projection were as small as 5 degrees. When using the described correction method, cup positioning differences could be greater than 20 degrees before introducing an error exceeding 0.2 mm. For followup of patients in clinical practice, we recommend using the correction method to enhance accuracy of the results.

Outcome of an acetabular design with hydroxyapatite coating on a rough substrate

Outcomes of hydroxyapatite-coated cups have not been as consistently successful as outcomes of hydroxyapatite-coated stems; therefore, we studied a newer generation acetabular design with a plasma-sprayed hydroxyapatite coating on an arc-deposited rough titanium substrate. Our objective was to determine whether clinical and radiographic outcomes would be better than reported for earlier-generation designs. Ninety consecutive hips in 85 patients implanted with this design were followed up prospectively for 2 to 5 years after surgery. Hip scores improved from a preoperative mean of 59 (+/- 12) to final followup mean of 91 (+/- 12). One hip was revised for recurrent dislocation. No hips were revised for aseptic loosening. No cup had complete continuous radiolucent lines. Incomplete lucent lines were noted on early postoperative radiographs. With followup, radiolucent line length decreased by a mean 32% and radiolucent line density increased by 9%. Mean polyethylene linear and volumetric head penetration rates were 0.17 (+/- 0.16) mm/year and 73 (+/- 70) mm/year, respectively. Head penetration rates were higher in men. No other factor (age, body weight, cup abduction, or anteversion angle) correlated with head penetration rate. Our study presents encouraging short-term results. Improvement in radiolucent lines suggests a beneficial effect of hydroxyapatite coating on osseointegration of the cup.

LEVEL OF EVIDENCE

Therapeutic study, Level IV (case series). See the Guidelines for Authors for a complete description of levels of evidence.

Hydroxyapatite-coated femoral stem survivorship at 10 years

Ninety-six patients were implanted with the Omnifit-HA femoral stem and the Omnifit-PSL porous-coated dual-radius acetabular shell (Stryker, Mahwah, NJ) and liners that were sterilized by gamma-radiation in air. The mean age at the time of surgery was 52 years (range, 27-78 years), and male/female ratio was 54:42. The mean follow-up was 10.3 years (range, 7-12 years). The survivorship of the stem and cup was 100% and 90%, respectively. Four cups were revised for aseptic loosening, and 6 liners were exchanged. The mean polyethylene wear rate was 0.24 mm/y. Lysis was noted in 23% of the cups. No patient developed femoral lysis distally. This hydroxyapatite-coated stem continues to perform well and appears to protect against the migration of wear debris along the femoral stem.