Supracondylar osteotomy for the treatment of cubitus varus in children: a systematic review

External fixators and lengthening systems in pediatric upper limb

The use of external fixators is part of the cultural background of orthopedic surgeons in treating numerous clinical conditions. Over the years, fixator design and biomechanical knowledge have led to different solutions and techniques, and bone lengthening and its better understanding come together with the development of external fixators and the application of the biological principle of distraction osteogenesis. The authors conducted a literature review about using external fixators and lengthening systems in pediatric upper limbs. Despite the applications of external fixators in upper limbs remaining much more limited than those of the lower limbs, there are indications of traumatic, congenital, tumor, and infectious etiologies. However, despite the spread of new systems of plate and screws and intramedullary lengthening nails, the problems about when to use external fixation remain unsolved. Another debated point is about using monolateral or circular frames for humeral lengthening and the correction of forearm deformities in multiple hereditary exostoses disease (MHE) or radial longitudinal deficiency sequelae. Monoaxial fixators retain a prominent role for skeletal lengthening in all the districts examined, although their role could be outclassed by the motorized intramedullary nails, especially for humeral lengthening. Hexapod systems are likely to represent the future for the correction of multiplanar forearm deformities; however, multicenter studies on larger series will be necessary to better validate their applications and advantages.

Evaluation of tension-band osteosynthesis for cubitus varus deformity in pediatric patients: A retrospective review

PURPOSE

This study aims to evaluate the effectiveness and safety of lateral closing wedge osteotomy with tension-band wire fixation for correcting cubitus varus deformity in pediatric patients. The primary objective was to assess the bone union rate, functional outcomes, and potential complications associated with this surgical approach.

METHODS

We conducted a retrospective review of 104 pediatric cases (ages 7-15) with post-traumatic cubitus varus deformity treated between January 2018 and December 2019 at the Pediatric Orthopedic Department. The surgical technique involved a lateral closing wedge osteotomy with fixation achieved using an 8-figure tension-band wire on the lateral column of the distal humerus. Follow-up assessments were conducted for bone union, correction stability, range of motion, and any post-surgical complications.

RESULTS

Out of 104 cases, 63 involved left elbows and 41 right elbows, with an average patient age of 8.12 years. The deformity was severe (>30° varus) in 33.65 % of cases. Successful correction and bone union were achieved in 100 % of cases, with an average follow-up duration of 8 months (range: 3-20 months). Complications included minor recurrence in two cases due to early post-operative trauma, limited range of motion in three cases, K-wire protrusion in three cases, and infection in two cases. Functional outcomes rated as excellent in 94.2 % of cases and good in 5.8 %.

CONCLUSION

Lateral closing wedge osteotomy with tension-band wire fixation is a reliable technique for correcting pediatric cubitus varus deformity, offering stable fixation, high success rates in bone healing, and favorable functional outcomes with minimal complications.

Effectiveness of supracondylar dome osteotomy in reducing lateral condylar prominence and enhancing functional outcomes in pediatric cubitus varus: a retrospective study

BACKGROUND

Cubitus varus, a common complication of pediatric supracondylar humerus fractures, presents with internal rotation, extension, and varus angulation. While primarily considered a cosmetic concern, it can lead to significant complications, including chronic pain, ulnar nerve palsy, and posterolateral elbow instability. This study evaluates the effectiveness of supracondylar dome osteotomy in decreasing lateral condylar prominence and improving functional outcomes in patients with cubitus varus.

METHODS

This retrospective cohort study analyzed 65 patients under 18 who underwent dome-shaped corrective osteotomy between 2017 and 2022 at the Hospital and Rehabilitation Center for Disabled Children, Nepal. Inclusion criteria comprised patients with cubitus varus deformity greater than 10 degrees and at least six months post-trauma. Outcomes were assessed using the Mayo Elbow Performance Score (MEPS), Lateral Condylar Prominence Index (LPI), and radiological measurements of carrying angle (CA).

RESULTS

The mean age at surgery was 11.77 years (± 3.76), with an average time since injury of 54.15 months (± 31.76). Post-operatively, the radiological carrying angle improved from 23.90° (± 8.84) varus to 5.14° (± 7.64) valgus. The LPI changed from 0.58 (± 16.68) preoperatively to -3.18 (± 16.39) post-operatively. MEPS improved from 89.54 (± 6.66) to 95.23 (± 5.26). Significant improvements in LPI were observed in patients older than 12 years (p = 0.00) and patients with radiological CA less than 20° (p = 0.02) and with a clinical CA less than 20°(p = 0.04).

CONCLUSIONS

Supracondylar dome osteotomy effectively reduces lateral condylar prominence in cubitus varus, particularly in post-pubertal patients and cases with radiological carrying angles less than 20 degrees. The procedure demonstrates good functional outcomes with acceptable complication rates, making it a viable surgical option for treating cubitus varus deformity.

Computer aided multiplanar osteotomy using patient specific instrumentation to treat cubitus varus in children

Cubitus varus deformity is a common complication of supracondylar fractures in children. Anatomic correction is the key to obtaining good functional results and avoiding later symptomatic degradation. Different techniques have been described, mainly lateral closing wedge osteotomy. A medial opening wedge osteotomy seems more intuitive, allowing an anatomic reduction, but it is technically challenging. Two-plane radiographs are too simplistic to appreciate the 3D deformity. With medical imaging and image processing advances, three-dimensional (3D) virtual models of a patient's anatomy can be generated. Rapid 3D printing has allowed virtual simulations of surgical corrections to be transferred to real-world applications in the operating room, allowing more precise and accurate surgery with better 3D corrections. 3D computer modeling with the development of customized drilling and cutting guides allows complex medial opening wedge osteotomy for correction of cubitus varus deformity in immature children with best-fit plate synthesis. LEVEL OF EVIDENCE: IV.

A systematic review of the operative techniques for treating cubitus varus deformity in children

A systematic review of the operative techniques for treating cubitus varus deformity in children was performed using research databases including PubMed and Embase. Outcome measurements included mean angular correction of the humerus-elbow-wrist angle, complications, revisions and outcome scores. A total of 45 papers and 911 patients were included. Lateral closing wedge osteotomy (LCWO) (427 patients) was the most common procedure and 5.56% of these patients experienced lateral condylar prominence. This technique had the highest revision rate at 3%. The step-cut osteotomy (111 patients) yielded zero postoperative infections or loss of motion. Distraction osteogenesis (92 patients) was the least common technique. Superficial pin tract infections occurred in 18% of patients and 88.04% of patients reported excellent results, the highest of any technique in this study. The infection rate of dome osteotomy (151 patients) was 9.45% and 4.72% of patients experienced loss of motion. 3D osteotomy (130 patients) had no infections, 87.78% of patients reported excellent outcomes, and 2.22% of patients reported poor outcomes, the lowest of all techniques. For unidimensional correction, LCWO provides a technically simple procedure and reasonable outcomes. Step-cut osteotomy has less lateral condylar prominence but is more complicated than LCWO. Distraction osteogenesis is a minimally invasive alternative to LCWO and step-cut osteotomy, but it has more superficial infections and can be bothersome to patients. For a multidimensional correction, 3D osteotomy is superior to dome osteotomy due to its lower infection rate and higher rate of functionally excellent outcomes.

Association of Clinical Findings With Complications in the Cubitus Varus Deformity After Supracondylar Fracture

INTRODUCTION

Cubitus varus deformity is primarily a cosmetic complaint that causes some early and late complications. However, no studies have reported the cubitus varus deformity regarding the frequency of complications, relationship to the degree of deformity, and period from the occurrence of the initial injury.

METHODS

Overall, 83 patients with cubitus varus deformity were examined. The differences in the humerus-elbow-wrist angle (∆HEW-A), tilting angle (∆TA), and internal rotation angle (∆IRA) between the affected and normal sides were measured to determine varus and extension and internal rotation deformity. The period from the occurrence of the initial injury to the evaluation date was also investigated. Multivariate logistic regression analysis was conducted to identify the explanatory variables (period, ∆HEW-A, ∆TA, and ∆IRA) independently associated with complication events. Receiver-operating characteristic curve analysis was also conducted to predict the risk of events.

RESULTS

∆HEW-A was independently associated with the risk of cosmetic complaint (odds ratio [OR], 1.171; 95% confidence interval [95% CI], 1.056 to 1.336) and instability (OR, 1.111; 95% CI, 1.028 to 1.200). ∆TA was independently associated with the risk of limited elbow motion (OR, 1.176; 95% CI, 1.077 to 1.285) and sports disability (OR, 0.892; 95% CI, 0.836 to 0.952). The period from the occurrence of the initial injury was independently associated with risk of pain (OR, 1.063; 95% CI, 1.019 to 1.108), ulnar nerve neuropathy (OR, 1.065; 95% CI, 1.011 to 1.125), and osteoarthritis (OR, 1.188; 95% CI, 1.098 to 1.286). The receiver-operating characteristic curve analysis revealed the optimal cutoffs of 20° and 27° for ∆HEW-A to predict cosmetic complaint and instability; of 25° for ∆TA to predict limited elbow motion; and of 8.8, 8.0, and 16.0 years for the period to predict pain, ulnar nerve neuropathy, and osteoarthritis, respectively.

DISCUSSION

The treatment of cubitus varus deformity should be determined because a residual deformity >20° of varus and 25° of extension could develop risk of complications over time.

Step-cut osteotomy for cubitus varus deformity with application of patient-specific instrument in children: a preliminary report

PURPOSE

The step-cut osteotomy has been recognized as a valuable approach for addressing cubitus varus deformity, albeit one that necessitates technical proficiency. This study aims to evaluate the efficacy of the modified step-cut osteotomy technique in conjunction with patient-specific instruments by clinical and radiological assessment.

METHODS

We conducted a retrospective review of patients who underwent modified step-cut osteotomy with the use of patient-specific instruments in conjunction with Kirschner wires fixation for the correction of cubitus varus deformity between April 2016 and April 2022. Follow-up was performed for a minimum of two years, during which pre-operative and post-operative clinical and radiological parameters were compared.

RESULTS

Fifteen patients were enrolled in this study. The mean pre-operative humeral-elbow-wrist (HEW) of the affected side was -21.7° (ranging from -14° to -34°), while the normal side was 9.4° (ranging from 5° to 15°). The post-operation HEW of affected side was 9° (ranging from 4° to 16°). There was no significant difference between the normal side and affected side after operation (p = 0.74). Pre-operative range of motion in the affected side was 130°, while the post-operative range of motion was 132°. Fourteen patients (93.3%) were pleased with the overall appearance of their elbow. None lazy-S deformity was observed in these cases. There were no major complications.

CONCLUSION

The modified step-cut osteotomy technique, utilizing patient-specific instrument in conjunction with Kirschner wires fixation was found to be a safe, reliable, and technically easy procedure for correcting cubitus varus deformity.

Design and application of a novel 3D printing digital navigation template for cubitus varus deformity in children

Background

This study was aimed to assess the feasibility and efficacy of 3D printing digital template for treatment of cubitus varus deformity.

Methods

32 patients who underwent lateral closing osteotomy were evaluated between January 2018 and January 2020 in this retrospective study. Navigation templates were used in 17 cases, while conventional surgery in 15 cases. The carrying angles before and after surgery, operation time and elbow joint function were compared.

Results

Navigation templates matched well with the anatomical markers of the lateral humerus. More accurate osteotomy degrees, shorter operation time and less radiation exposure were achieved in the navigation template group (p < 0.05). At the last follow-up time, significant difference was found based on the Bellemore criteria (p = 0.0288).

Conclusions

The novel navigation template can shorten operation time, improve the lateral closing osteotomy accuracy and improve postoperative elbow joint function.

Management of Pediatric Elbow Fractures and Dislocations

Pediatric elbow fractures and dislocations have always been a challenge from a diagnostic and therapeutic point of view, primarily due to the complex nature of the pediatric elbow, especially its developmental anatomy. They must be diagnosed and treated on time to prevent numerous complications with long-term consequences. With the development of radiology and pediatric surgery and orthopedics, as well as the development of modern osteosynthesis materials, concerning current scientific and professional knowledge, the outcomes are getting better, with fewer acute and chronic complications. This comprehensive review aims to provide clinicians current knowledge about pediatric elbow fractures and dislocations so that in daily practice they have as few doubts as possible with the best possible treatment outcomes.

Posttraumatic Cubitus Varus: Respect the Columns

Posttraumatic cubitus varus is a multiplanar deformity that results from an improperly reduced supracondylar humerus fracture. The prevention of posttraumatic cubitus varus hinges on the stable restoration of all 3 columns of the distal humerus while avoiding malrotation. The collapse of any column leads to varying degrees of deformity in the coronal, sagittal, and/or axial plane. The purpose of this article is to explain the pattern of the deformity and use this to summarize preventative tactics for avoiding its described sequelae. We also summarize, illustrate, and present case examples for the various osteotomies used to correct the deformity, and speculate future directions.

Three-dimensional corrective osteotomy for cubitus varus deformity using patient-matched instruments

Background

Various methods of two or three-dimensional (3D) corrective osteotomy for cubitus varus deformity have been reported. However, whether 3D correction of cubitus varus deformity is necessary is controversial because of technical difficulties and surgical complications. This study introduced 3D simulations and printing technology for corrective osteotomy against cubitus varus deformities. Moreover, recent studies on the application of these technologies were reviewed.

Methods

The amount of 3D deformity was calculated based on the difference in 3D shape between the affected side and the contralateral normal side. Patient-matched instruments were created to perform the actual surgery as simulated. Further, a 3D corrective osteotomy was performed using patient-matched instruments for cubitus varus deformity in pediatric and adolescent patients. The humerus-elbow-wrist angle, tilting angle, and elbow ranges of motion were evaluated.

Results

Humerus-elbow-wrist angle and tilting angle were corrected from -21° to 14° and from 30° to 43°, respectively, in the pediatric patient and from -18° to 10° and from 20° to 40°, respectively, in the adolescent patient. The elbow flexion and extension angles changed from 130° to 140° and from 20° to 10°, respectively, in the pediatric patient and from 120° to 130° and from 15° to 0°, respectively, in the adolescent patient.

Conclusion

The 3D computer simulations and the use of patient-matched instruments for cubitus varus deformity are reliable and can facilitate an accurate and safe correction. These technologies can simplify the complexity of 3D surgical procedures and contribute to the standardization of treatment for cubitus varus deformity.

Surgical correction of cubitus varus in children with a lateral closing-wedge osteotomy: a comparison between two different techniques

OBJECTIVES

The primary objective of the present study is to compare the radiographic outcomes and complications of two different techniques for lateral closing-wedge osteotomy in pediatric patients with cubitus varus.

METHODS

We retrospectively identified patients treated at five tertiary care institutions: 17 underwent the Kirschner-wire (KW) technique, and 15 patients were treated with the mini external fixator (MEF) technique. Demographic data, previous treatment, pre- and postoperative carrying angle (CA), complications and additional procedures were recorded. Radiographic evaluation included assessment of the humerus-elbow-wrist angle (HEW), and the lateral prominence index (LPI).

RESULTS

Patients treated with both KW and MEF achieved significant improvements in clinical alignment (mean pre-op CA -16 ± 6.1 degrees to mean post-op 8.9 ± 5.3 degrees, P < 0.001). There were no differences in final radiographic alignment or radiographic union time; however, time to achieve full elbow motion was faster in the MEF group (13.6 versus 34.3 weeks, P = 0.4547). Two patients (11.8%) in the KW group experienced complications, including one superficial infection and one failed correction that required unplanned revision surgery. Eleven patients in the MEF group underwent a planned second surgical procedure for hardware removal.

CONCLUSIONS

Both fixation techniques are effective at correcting cubitus varus in the pediatric population. The MEF technique may have the advantage of shorter recovery of elbow range of motion but may require sedation for hardware removal. The KW technique may present a slightly higher complication rate.

Locking plate versus K-wires and cast fixation in lateral closing-wedge osteotomy for cubitus varus deformity

Background

The aim of this study was to assess the clinical and radiographic outcomes of cubitus varus treatments based on different fixation methods: Locking plate vs. Kirschner-wires (K-wires) and cast fixation.

Methods

This retrospective study of 28 patients was performed in lateral-wedge osteotomy for cubitus varus deformity in our hospital from July 2018 to July 2020. 14 patients in group A were treated by locking plate after lateral closing-wedge osteotomy, whereas other 14 patients were treated by K-wires in group B. We measured the bony union and carrying angle. The clinical and radiographic outcomes were assessed according to the Bellemore criteria.

Results

No nonunion, neurovascular injury or myositis ossificans was noted at follow-up. In group A, 1 patient with lateral condylar prominence was found. In group B, 2 patients with pinning site infection were treated successfully with oral antibiotics and 2 patients needed revision surgery for residual varus. According to the Bellemore criteria, statistically significant difference was noted between the two groups (P = 0.0458). In the present study, no statistically significant difference was noted in the length of incision and operation time between the 2 groups (P > 0.05). However, the postoperative carrying angle was significantly different at final follow-up between the 2 groups (P < 0.01).

Conclusions

Compared with K-wires and cast fixation, we recommend the wedge osteotomy with lateral locking plate to treat the cubitus varus deformity because locking plate could achieve better functional and cosmetic results and stabilize the distal humerus rigidly.

Lateral Collateral Ligament Reconstruction Using the Triceps Brachii Fascia for Posterolateral Rotatory Instability in Cubitus Varus: A Report of Two Cases

A combination of osteotomy and ligament reconstruction is recommended for posterolateral rotatory instability (PLRI) with large cubitus varus deformities. There is a lack of reports regarding ligament donor selection for ligament reconstruction of PLRI with cubitus varus. Two cases of PLRI with cubitus varus have been described. In case one, a 40-year-old woman presented with left elbow pain. She had a cubitus varus deformity, resulting from a childhood elbow fracture. Radiographs showed an 18-degree cubitus varus deformity. A lateral closing wedge osteotomy and double plate osteosynthesis were performed. The lateral collateral ligament (LCL) was reconstructed with autologous triceps fascia. Postoperative radiographs confirmed correction with 10 degrees of the carrying angle (CA). Bone union at the osteotomy site occurred six months later with excellent results. In case two, a 45-year-old man presented an arm with persistent right elbow instability with cubitus varus deformity. This was due to a childhood supracondylar fracture of the right humerus. Radiographs showed a cubitus varus deformity of 25 degrees on the right. The surgical procedure included a lateral wedge osteotomy, double plate fixation, and LCL reconstruction with autologous triceps fascia. Postoperative radiographs confirmed a corrected CA of 5 degrees. Bone union was achieved at the six-month follow-up with satisfactory results. The use of triceps fascia for LCL reconstruction for PLRI due to cubitus varus would provide a minimally invasive and reasonable treatment option.

Bracing with Tape and Extensor Refixation of Elbow with Posterolateral Instability Due to Cubitus Varus: A Case Report

CASE

A 54-year-old patient had lateral ligament insufficiency due to cubitus varus from a childhood supracondylar fracture. Arthrolysis/synovectomy and at a later stage double-row extensor origin refixation and lateral ulnar collateral ligament bracing with nonabsorbent tape and anchors were performed. Follow-up at 3, 6, 12, and 24 months showed excellent Mayo Elbow Performance and Disabilities of Arm, Shoulder, and Hand Scores (24-month follow-up = 100 and 2.5, respectively).

CONCLUSION

Suture tape augmentation and double-row extensor refixation in cases of lateral collateral ligament complex insufficiency due to cubitus varus may provide improved short-term functional outcomes, from the third postoperative month.

A Modified Reverse Right-angled Triangle Osteotomy Using the Lateral Approach for the Treatment of Posttraumatic Cubitus Varus Deformity in Children

BACKGROUND

Cubitus varus deformity is a complex 3-dimensional deformity. Various osteotomies have been introduced to correct this deformity, however, there is no consensus on the best procedure to correct the deformity while avoiding complications. In this retrospective study, we used a modified inverse right-angled triangle osteotomy to treat 22 children with posttraumatic cubitus varus deformity. The primary objective was to evaluate this technique by presenting its clinical and radiologic results.

METHODS

Twenty-two consecutive patients with a cubitus varus deformity underwent a modified reverse right-angled triangle osteotomy between October 2017 and May 2020 and were then followed for a minimum of 24 months. We evaluated its clinical and radiologic results. Functional outcomes were assessed using Oppenheim criteria.

RESULTS

The average follow-up period was 34.6 months (range, 24.0 to 58.1 months). The mean range of motion was 4.32 degrees (range, 0 degrees to 15 degrees)/122.73 degrees (range, 115 degrees to 130 degrees) (hyperextension/flexion) before surgery and 2.05 degrees (range, 0 degrees to 10 degrees)/127.27 degrees (range, 120 degrees to 145 degrees) at the final follow-up. There were significant ( P < 0.05) differences between the flexion and hyperextension angles before surgery and at the final follow-up. Based on Oppenheim criteria, results were excellent for 20, good for 2, and none of the patients had poor results. The mean humerus-elbow-wrist angle improved from 18.23 degrees (range, 10 degrees to 25 degrees) varus preoperatively to 8.45 degrees (range, 5 degrees to 15 degrees) valgus postoperatively ( P < 0.05). The mean of the preoperative lateral condylar prominence index was 3.52 (range, 2.5 to 5.2) and the average postoperative lateral condylar prominence index was -3.28 (range, -1.3 to -6.0). All patients were pleased with the overall appearance of their elbows.

CONCLUSIONS

The modified reverse right-angled triangle osteotomy can precisely and stably correct the deformity in the coronal and sagittal planes, we recommend this technique as a simple, safe, and reliable correction of cubitus varus deformity.

LEVEL OF EVIDENCE

Level IV; case series; therapeutic studies-investigating the results of treatment.

Guided Growth for the Treatment of Cubitus Varus in Children: Medium- to Long-Term Results

Correction of cubitus varus is commonly attempted through supracondylar humeral osteotomy. We hypothesized that lateral distal humeral hemiepiphysiodesis (LDHH) could be used to gradually correct this deformity in children. We conducted a retrospective study including all patients who underwent LDHH with the eight-Plate system between 2008 and 2018, with a minimum 4-year follow-up. We collected demographic, fracture-related, pre- and postoperative clinical (carrying angle (CA), ROM), and radiological data (humeral-ulnar angle (HUA), Baumann angle (BA), shaft-condylar angle (SCA), lateral capitellohumeral angle (LCHA)), as well as data on complications and satisfaction at last follow-up. Fifteen patients were included, with a median follow-up of 81 (64–103) months. All the variables had improved significantly as follows: CA −16 (−18 to −9)°, HUA −16 (−19 to −12)°, BA −11 (−17 to −7)°, SCA 7.5 (3.3 to 13.8)°, LCHA −4.8 (−6.8 to 0.6), flexion 10 (0 to 24)°, and extension 10 (0 to 10)°. The annual correction rate in terms of HUA was 2.41° (1.9 to 3.2). There were 5 cases of aseptic screw loosening, 4 of them requiring replacement, without relation to age at surgery (p = 0.324). Most patients (86.67%) were satisfied, and a relationship was found with younger age at surgery (p = 0.037). In conclusion, preliminary results show that LDHH with the eight-Plate system is an effective technique for mild to moderate cubitus varus deformity correction in children. Patients should be advised of the relatively long duration of implant retention and the possibility of reoperation for screw replacement or implant removal.

Shortening dome osteotomy for correction of severe cubitus varus secondary to malunited supracondylar fractures in children

The results of conventional corrective procedures remain suboptimal for severe cubitus varus deformities (> 30^°) in children. We present the results of shortening dome osteotomy for the correction of such deformities.

PATIENTS AND METHODS

We present retrospective review of prospectively collected data of 18 patients (11 boys and 7 girls) who underwent shortening dome osteotomy between January 2011 and December 2019 for severe cubitus varus deformities (> 30^°) secondary to malunited supracondylar fracture. The procedure involved the removal of convexo-concave bone (5-8 mm wide) between the two domes. Humero-ulnar angles, lateral condylar prominence index (LCPI), and elbow range of movements were recorded preoperatively and postoperatively.

RESULTS

Mean age was 7.5 years (range 5 years-11 years). Indication for surgery was poor cosmesis in all the patients and tardy ulnar nerve symptoms in three patients. Mean preoperative humero-ulnar angle was 26.1^° varus (range 22^°-34^°), while it was 7.1^° valgus (range 0^°-12^°) for contralateral normal elbow. They were followed for a mean duration of 2.2 years (range 12 months-5.8 years). The mean postoperative valgus angle achieved was 7.3^° (range 2^°-12^°) as total angular correction achieved was 34.4^° (range 30^°-44^°) (p < 0.001). Radiological healing was observed in all the patients at mean duration of 7.1 weeks (range 5 weeks-9 weeks). Mean preoperative and postoperative LCPI were - 2.4 (range +4.7 to - 10.5) and - 1.7 (range +4.5 to - 5.1), respectively (p = 0.595). Three patients had pin tract infections and two of them responded to aseptic dressings and oral antibiotics, while another required early pin removal and additional protection in splint. All patients regained preoperative arc of motion within 6 months after the procedure.

CONCLUSION

Shortening dome osteotomy is a safe and effective method for correcting severe cubitus varus deformities (> 30^°) secondary to malunited supracondylar fracture in children.

Correction of Pediatric Cubitus Varus by Centralization of the Distal Humeral Fragment: A Surgical Technique to Avoid Lateral Condylar Prominence

BACKGROUND

Cubitus varus is a well-recognized late complication of supracondylar humerus fractures in children. Various osteotomies have been described to correct this deformity, but each has disadvantages. The purpose of this study was to investigate the outcomes of a surgical technique, lateral closing wedge osteotomy combined with centralization of the distal humeral fragment, in cubitus varus. Meanwhile, the occurrence of postoperative lateral condylar prominence was observed.

METHODS

From January 2015 to December 2019, 36 pediatric cubitus varus deformity patients who were treated with lateral closing wedge osteotomy combined with centralization of the distal fragment in our institution were included. The corrective osteotomies were performed through a standard lateral approach and fixed with crossed Kirschner wires. The preoperative and postoperative full-length anteroposterior and lateral radiographs of bilateral upper limbs were assessed. At the same time, clinical and radiologic parameters were reviewed. Lateral condylar prominence index (LCPI) and any other complications were evaluated.

RESULTS

The mean preoperative humerus-elbow-wrist angle (HEWA) on the affected side was 20.9 degrees of varus, which was significantly improved to 9.2 degrees of valgus postoperatively. The mean postoperative value of LCPI was -0.047. Postoperative LCPI and HEWA was compared with the normal side, and there was no significant difference. All of the patients had excellent clinical and radiographic alignment. No surgical complications and limitation of range of motion were noted. No patient complained of lateral bony prominence.

CONCLUSION

Lateral closing wedge osteotomy by centralization of distal fragment is a safe and highly effective method and prevents lateral prominence with a minimal complication rate. We recommend this technique for the treatment of cubitus varus in children.

LEVEL OF EVIDENCE

Level IV Case series.

Sequelae of childhood elbow fracture

Elbow fracture is frequent in children, and often requires surgery. There are many potential sequelae: neurovascular, ligamentous and osseous. Some are liable to be overlooked, due to young age and the cartilaginous nature of the joint. There is little bone remodeling in the elbow and displacement fracture, and especially supracondylar or lateral condyle fracture, has to be corrected rigorously, notably in older children. In case of lateral tilt in fracture of the neck of the radial head, on the other hand, remodeling is effective. Deformity in cubitus varus and cubitus valgus leads to neurological lesions and instability. Treatment should be early, with adapted surgery in expert hands. Post-traumatic stiffness is rare. Early intensive physiotherapy is unsuited to children and could worsen the stiffness due to inflammation. Lateral condyle non-union is a classic complication of fracture. Simple percutaneous screwing is a useful option. The equivalent in the medial epicondyle is well-tolerated, and simple monitoring now suffices. Late posterolateral rotational instability is a poorly known complication. It should be considered in case of cubitus varus that becomes painful after a long asymptomatic course. Radiocapitellar subluxation is seen on X-ray. Residual radial head dislocation after primary treatment (Monteggia lesion) responds well to the Bouyala technique of ulnar flexion osteotomy associated to annular ligament repair, without requiring ligament reconstruction.

Supracondylar Dome Osteotomy With a Posterior Triceps-splitting Approach for Acute Correction of Posttraumatic Cubital Axis Deformities in Adolescent Patients

BACKGROUND

Fractures around the elbow are common in children. Their management remains challenging. Inadequate treatment often leads to malunion, causing growth disturbance or avascular necrosis. This can develop into cubital axis deformities. This study evaluated our modified supracondylar dome osteotomy technique for acute correction of posttraumatic cubital axis deformities in adolescent patients.

METHODS

Eighteen cases of posttraumatic cubital axis deformity that underwent acute correction through supracondylar dome osteotomy in our department between 2012 and 2019 were retrospectively evaluated. The radiologic results were measured through the carrying angle. The clinical functional outcomes were assessed using the Mayo Elbow Performance Index.

RESULTS

No neurovascular injuries occurred and there was no notable loss of muscular strength or functional deficiencies in any of the patients. Symmetrical cubital axes were achieved in all cases. All cases were consolidated in a timely matter and no malunion was observed upon consolidation. Besides 1 case of hardware damage caused by a severe fall due to heavy alcohol intoxication, there was no correction loss, no secondary displacement, and no implant-related discomfort. None of the patients were left with a limited range of motion or reduced weight-bearing capacity. An excellent level of elbow functionality was achieved in all cases, with an average Mayo Elbow Performance Index of 97.8.

CONCLUSIONS

The supracondylar dome osteotomy technique showed promising results in both radiologic outcomes and clinical performance, with a low complication rate. The dome-shaped osteotomy allows simultaneous multiplanar correction of not only varus or valgus deformities but also additional extension or flexion deformities. This technique also enables translation of the distal fragment in the frontal plane, which contributes to a more balanced anatomic geometry of the distal humerus. We consider the posterior triceps-splitting approach to be a safe technique that preserves muscle strength and improves the cosmetic appearance of the surgical scar. We recommend a cast-free plate fixation to allow early movement after surgery. We believe any residual deformities that present 18 months after the initial trauma should be addressed through surgical correction before clinical symptoms become apparent to avoid the chronic manifestation of functional deficiencies.

LEVEL OF EVIDENCE

Level IV, therapeutic study, case series.

Correction of Cubitus Varus Using Computer-Assisted Hexapod Multiplanar External Fixators: A Report of 3 Cases

CASE

Three male patients, 8-, 13-, and 18-year-old, all developed posttraumatic cubitus varus elbow deformity after distal humerus supracondylar fractures. Each underwent a distal humerus osteotomy with application of a hexapod external fixator to gradually correct the deformity.

CONCLUSION

In patients with cubitus varus malunion, the stability of the hexapod external fixation, percutaneous nature of the osteotomy, and availability of running a residual computer-assisted program provides a consistent technique for deformity correction.

Effect of a functional brace in combination with physical therapy for early correction of cubitus varus in young children

Background

This study aimed to assess the clinical and radiologic outcomes of a functional brace in combination with physical therapy (FBPT) for early correction of cubitus varus in young children.

Methods

Eighteen consecutive patients with cubitus varus secondary to supracondylar fractures were enrolled between July 2017 and March 2019. We used the FBPT technique to correct varus and sagittal plane deformity for early cubitus varus in young children. The clinical evaluation included measurement of varus angulation, sagittal plane, and range of motion at three, six, and twelve months post-intervention. The clinical and radiographic results were assessed according to the Bellemore criteria.

Results

Pre-treatment humerus-elbow-wrist (HEW) angle measured on the affected side (varus deformity) ranged between -38° and -12° (average, -23.2°) while the post-treatment HEW angle ranged between -10° and + 15° (average, 8.8°). Compared with the unaffected side, no statistically significant difference was found in the affected side post-intervention (P > 0.05). According to the Bellemore criteria, we got excellent results in fourteen patients (77.8%), good results in three patients (16.7%), and poor result in one patient (5.5%). All patients and their parents (except one patient with residual varus deformities) were satisfied with the functional and cosmetic outcomes.

Conclusions

The FBPT is effective for the treatment of cubitus varus in children, especially for young children within 6 months of the injury.

Standalone Axial Malrotation after Pediatric Supracondylar Fracture Does Not Seem to Be an Indication for Immediate Postoperative Revision Surgery

Rotational spurs as evidence for post-surgical malrotation are frequently observed when treating pediatric supracondylar humeral fractures (SCHFs). This study aimed to investigate the long-term outcome of a pediatric cohort with unrevised axial malrotation and to discuss the indication for revision surgery. Postoperative radiographs of children treated for SCHFs over eight years were retrospectively analyzed. Children with radiological signs of malrotation (von Laer malrotation quotient) were invited for a follow-up clinical and radiological examination. Among 338 treated children, 39 (11.5%) with a mean age of 5.3 years (range 1.8–11.7 years) showed radiological signs for postoperative malrotation and were not revised and therefore invited to participate in the study. Twelve patients (31%) with a mean age of 11.3 years (range 8.8–13.8 years) took part in the follow-up examination after a mean of 7.1 years (range 5.4 to 11.3 years). The mean postoperative van Laer malrotation quotient was 0.15 (range 0.11–0.2). At follow-up, the range of motion of the elbow joint was not significantly different compared to the contralateral side. Apart from the humeral ulnar angle (p = 0.023), there were no significant differences in the radiological axes. The Flynn criteria were excellent and good in 90% of the cases. The mean was 1.7 points indicating excellent subjective results. Standalone postoperative malrotation did not lead to an adverse long-term outcome in a small cohort of pediatric patients with SCHFs and did not indicate immediate postoperative revision surgery. However, further investigations with larger cohorts should verify whether additional criteria such as stability of the osteosynthesis and signs for increasing valgus or varus displacement in the follow-up radiographs should get more importance in decision making.

Comparative evaluation of pinning and cast fixation vs. external fixation after lateral closing-wedge osteotomy for cubitus varus in children

BACKGROUND

Cubitus varus has been regarded as a poor functional and cosmetic consequence of supracondylar humerus fracture in children. The aim of this study was to assess the clinical and radiologic outcomes of cubitus varus treatments based on fixation methods: Kirschner (K)-wire and cast fixation or external fixation.

METHODS

Forty consecutive patients with cubitus varus secondary to supracondylar fractures were retrospectively enrolled between October 2015 and December 2018. Following lateral closing-wedge osteotomy, those undergoing K-wire and cast fixation were included in group A (n = 21) and those who were treated with external fixation comprised group B (n = 19). We measured the bony union, elbow joint range of motion, and carrying angle. The clinical and radiographic results were assessed according to the Bellemore criteria.

RESULTS

No significant difference was found between the 2 groups in terms of age, gender, operation duration, union time, and postoperative elbow range of motion (P > .05). A significant difference was noted, however, in postoperative carrying angle and results according to Bellemore criteria in group B (P < .05). No nonunion, myositis ossificans, or neurovascular injury was found at follow-up in the 2 groups. In group A, revision surgery was needed for residual varus in 1 patient and lateral condylar prominence was found in 2 patients. In group B, a superficial pin-site infection occurred in 2 patients, who were treated successfully with oral antibiotics.

CONCLUSIONS

Both K-wire and external fixation after lateral closing-wedge osteotomy are reliable and effective for the treatment of cubitus varus in children. Compared with the K-wire method, external fixation achieves better functional and cosmetic results with a shorter learning curve.

[Application of picture archiving and communication systems in lateral wedge osteotomy for cubitus varus deformity in teenagers]

Objective

To investigate effectiveness of picture archiving and communication systems (PACS) in lateral wedge osteotomy for cubitus varus deformity in teenagers.

Methods

A clinical data of 16 teenagers with cubitus varus deformity between July 2014 and July 2016 was retrospectively analyzed. All patients were treated with lateral wedge osteotomy and fixed with plate. Before operation, the osteotomy design (the osteotomy angle and length) was done in the PACS, including the carrying angle of healthy limb and the varus angle of affected side. There were 10 males and 6 females, with an average age of 11.4 years (range, 10-17 years). The disease duration ranged from 2 to 10 years (mean, 5.6 years). The preoperative X-ray film showed that the supracondylar fractures of the humerus had all healed, and 9 cases had internal rotation deformity; the varus angle of the affected side was 19.5°-33.5°. After operation, the fracture healing and cubitus varus deformity correction were observed by X-ray films, the elbow function was evaluated by Mayo scoring, and the elbow range of motion was detected.

Results

There was no significant difference between the actual intraoperative osteotomy angle and length and the preoperative design ( P>0.05). The hospital stay was 2-8 days, with an average of 4.5 days. No complication such as incision infection or ulnar nerve injury occurred. All 16 cases were followed up 12-18 months, with an average of 14 months. X-ray films showed that the osteotomy healed at 2-7 months after operation, with an average of 2.5 months. The internal fixators were removed within 8-14 months after operation (mean, 12.0 months). X-ray films measurement showed that the carrying angle of the affected side recovered to (10.3±2.0)° at 1 day after operation, which was not significantly different from that of the healthy side [(10.6±1.5)°] before operation ( t=0.480, P=0.637). The carrying angle of the affected side was (9.8±2.6)° at 1 year after operation, which was not significantly different from that of the healthy side [(10.4±1.6)°] at the same time point ( t=0.789, P=0.438). At 1 year after operation, the ranges of flexion and extension of affected side were (131.6±8.4)° and (6.4±2.6)°, respectively; and the ranges of flexion and extension of healthy side were (134.2±6.3)° and (5.9±2.2)°, respectively. There was no significant difference between the healthy and affected sides ( t=1.143, P=0.262; t=0.587, P=0.561). The elbow joint function at 1 year after operation evaluated by Mayo scoring standard rated as excellent in 9 cases, good in 6 cases, and fair in 1 case, and the excellent and good rate was 93.7%.

Conclusion

Before lateral wedge osteotomy, the PACS is used to design the osteotomy angle and length, which can guide the operation and make the osteotomy more accurate and simple.

Arthroscopy of the Pediatric Elbow: Review of the Current Concepts

As surgeons have become more familiar with elbow arthroscopy, the indications for arthroscopy of the pediatric elbow have expanded to include contracture releases, fracture fixation, treatment of osteochondritis dissecans (OCD) lesions, correction of elbow deformity, and debridement of soft tissue and bony pathologies. The treatment of various pathologies via an arthroscopic approach demonstrates equal, if not better, efficacy and safety as open surgery for the pediatric elbow. Arthroscopy provides the unique advantage of enabling the performance of extensive surgeries through a minimally-invasive approach, and it facilitates staged interventions in cases of increased complexity. For fracture work, arthroscopy enables direct visualization to assess reduction for percutaneous fixations. While future research is warranted to better evaluate the indications and outcomes of pediatric elbow arthroscopy, this update article presents a review of the current literature, as well as several innovative cases highlighting the potential of arthroscopy.

Not Kidding! Sequalae of elbow trauma in children

Elbow injuries are common in children and while majority heal very well, some result in deformities of the elbow. Although deformities such as cubitus varus and non-progressive cubitus valgus are considered cosmetic by the paediatric orthopaedic surgeons and intentionally ignored, they are not always benign and can result in functional deficit due to instability, pain, tardy nerve palsies and osteoarthritis later in life. Similarly congenital and developmental conditions that do not cause major functional loss in childhood, become very disabling in adults due to increasing functional demands. Congenital radial head dislocation and radioulnar synostosis fall into this category. In this paper we discuss clinical presentation, treatment options and outcomes of common elbow conditions presenting later in the life.

Functional outcome of modified French osteotomy fixed with recon-locking compression plate in older children

INTRODUCTION

Modified French osteotomy is commonly used method for the correction of cubitus varus deformity. Fixation of the osteotomy with figure of 8 wiring or 3.5 mm cortical screws were found to be insufficient in holding the distal fragment in children above 8 years. In this study we used a Reconstruction locking plate for the fixation of osteotomy in those children and evaluated the results.

MATERIALS AND METHODS

Modified French osteotomy and fixation with reconstruction locking compression plate was performed for eighteen cases of cubitus varus deformity within the time period of 5 years starting from March 2014 to February 2019.

RESULTS

The outcome of the study was assessed with Flynn's criteria, where 12 cases had excellent and 6 cases had good outcome. There were no complications and no revision surgeries were performed.

CONCLUSION

Reconstruction locking plate fixation of a modified French osteotomy in older children (above 8 years) provided excellent results in our study.

'Does compliance with BOAST guidelines matter for displaced supracondylar fractures in children?': the experience of a tertiary referral major trauma centre over a 3.5-year period

Supracondylar fractures are the most frequently occurring paediatric fractures about the elbow and can be associated with neurovascular injury. For that reason, the British Orthopaedic Association has published the British Orthopaedic Association Standards for Trauma (BOAST) 11 guidelines, aiming to the best management of supracondylar fractures. The aim of this study was to assess adherence to the BOAST 11 guidelines for displaced supracondylar fractures at a Major Trauma Centre in London, UK between 2015 and 2018 and to see whether adherence to guidelines affected the outcomes. A retrospective review was carried out between January 2015 and August 2018 of all paediatric patients who underwent either closed reduction and percutaneous pinning or open reduction and fixation for a displaced supracondylar fracture of the humerus. One hundred nine patients between 1 and 16 years of age with isolated displaced extension type supracondylar fractures (Gartland II, III and IV) were included in the study. The current study did not manage to achieve complete compliance with the BOAST 11 guidelines. K-wire size, fixation technique and pre-, intra-, postoperative documentation were the most important points of lack of compliance. However, deviating from specific guidelines did not cause any adverse clinical outcomes. Lack of correct documentation either preoperatively or postoperatively could be detrimental to patient outcome, especially with respect to neurovascular status. Implementation of a clerking template for use in the electronic medical records for all children with displaced supracondylar fractures is of value in order to improve our documentation.

Case Report: Locking Plate for Cubitus Varus Correction in a 7-Year-Old Girl With Osteogenesis Imperfecta

Background: Cubitus varus deformity is a common complication of untreated elbow fractures in children. However, cubitus varus in osteogenesis imperfecta (OI) children is a rare but challenging situation. To the author's knowledge, this is the first study discussing the correction of cubitus varus deformity in patient with OI. Case Presentation: Here we report a case of a 7-year-old OI girl with cubitus varus deformity due to a supracondylar fracture of humerus 3 year ago. The patient's parent gave a history of supracondylar fracture of left humerus in 2015. Without medical intervention, the patient was admitted into our institution for corrective surgery with the diagnosis of osteogenesis imperfecta and cubitus varus deformity in the left arm. Result: Medications including calcium, vitamin D and bisphosphonates were administered before the corrective surgery of cubitus varus, and a single locking plate was used to fixate the osteotomy. After the surgery, the appearance and range of motion (ROM) of the left arm was almost normal. Combined with gradual rehabilitation, the ROM of the left arm was normal without pain during daily use within the 1-year follow up. The hardware was removed as the nailing of the forearm fractures was performed at the same time. In the latest follow-up in September 2021, the appearance and ROM of the left arm was normal. Conclusion: Cubitus varus is a common deformity in children with elbow injuries, but it presents a challenging situation in compound fractures in OI patients. Locking plate combined with meticulous pharmacological intervention provides a good option for corrective surgery of cubitus varus in patients with OI.

A modified rotating isosceles triangle osteotomy using a 3D-printed patient-specific guide for the treatment of cubitus varus in children: a case report and literature review

After corrective osteotomy of cubitus varus, the lateral condylar prominence is a common problem, which is believed to be due to the unequal relative cuts of the lateral base wedge osteotomy. Therefore, several related solutions have been proposed, such as dome osteotomy and step-cut osteotomies, which solve the above problems to a certain extent. This study aimed to: (I) use a modified corpectomy to correct the deformity, and (II) present a new corpectomy method that uses a 3D-printed specific guide with an isosceles triangle osteotomy. A 12-year-old male presented with a -30-degree cubitus varus deformity 5 years after a supracondylar fracture of the right humerus. The degree of correction was determined from the varus angle and the normal carrying angle on the normal side. A rotating isosceles triangle osteotomy was determined by using Mimics software. The accuracy of the osteotomy angle was confirmed by postoperative radiography. The mean postoperative carrying angle was found to be preserved at the 10-month follow-up, with no complications. A rotating isosceles triangle osteotomy with a 3D-printed patient-specific guide may be providing a relative accurate result. However, in order to obtain more rigorous research conclusions, more cases should be added to examine this methodology for bone deformity surgery in the near future.

Early correction of malunited supracondylar humerus fractures in young children

INTRODUCTION

Supracondylar fracture malunion usually results in cubitus varus deformity. The long-standing unsightly deformity causes psychological stress to the child and his/her parents in addition to biomechanical disturbances and functional disorders in the affected elbow. The optimal timing of corrective osteotomy is not well-established in the literature. The present study aimed to report the results of early correction of cubitus varus deformity using a simple technique and to focus on the timing of early correction after supracondylar fracture malunion.

PATIENTS AND METHODS

Thirty consecutive patients treated for recent cubitus varus deformity after malunited supracondylar fractures, in the period between January 2012 and August 2017, were retrospectively reviewed. All patients had early surgical correction of the deformity within one year after the initial injury. In patients who presented with maluniting supracondylar fracture, the fracture was splinted until union was achieved, then active exercises were encouraged until elbow ROM was regained. The deformity was then corrected with a lateral closing wedge (LCW) osteotomy and fixed with two lateral and one medial wire.

RESULTS

All the osteotomies united. All the deformities were corrected. The humerus-elbow-wrist (HEW) angle significantly improved compared to the pre-operative values (p<0.001). All patients achieved satisfactory results at the final evaluation. Twenty-six patients (86.7%) achieved excellent results while four patients (13.3%) achieved good results.

CONCLUSION

Early correction of cubitus varus deformity avoids the psychological stress of the long-standing unsightly deformity to the young child and his/her family. It also avoids the delayed biomechanical and functional disturbances to the affected elbow. The LCW osteotomy and the three-wires fixation technique are simple and effective to correct the deformity and maintain the correction.

Results of the modified reverse step-cut osteotomy in paediatric cubitus varus

PURPOSE

Cubitus varus deformity occurs in children as a late consequence of supracondylar fracture of the distal humerus. Different types of corrective osteotomies have been described, but a gold standard has not yet been established. The aim of this study is to report the clinical, radiological, and cosmetic outcome of the modified reverse step-cut osteotomy technique.

METHODS

This study was conducted on 15 cases, which were operated during the period between July 2015 and June 2016. We used the technique modified reverse step-cut osteotomy with the calculated medial translation of the distal fragment to correct varus and sagittal plane deformity and to achieve anatomical alignment of the forearm axis with the axis of the humerus. Follow-up was done for two years. Pre-operative and post-operative clinical and radiological parameters were compared, and patient satisfaction was assessed.

RESULTS

The mean pre-operative humerus-elbow-wrist (HEW) angle was - 22.4°; it improved to + 9.4° post-operatively. The pre-operative mean range of motion was 131.6°, and the post-operative mean was 132°. The clinico-radiological outcome was assessed according to Oppenheim criteria. There was an excellent result in nine patients (60%), a good result in five patients (33.3%), and poor results in one patient (6.6%). Cosmetic outcome was assessed as per Barrett's criteria, excellent result in thirteen patients (86.6%) and poor results in two patients (13.3%). Post-operative lateral condylar prominence index (LCPI) was compared with the normal side, and there was no significant difference.

CONCLUSION

We have achieved satisfactory results with acceptable cosmetic appearance and functional outcomes with minimal complications. We recommend this technique as a safe, reliable, reproducible, technically easy procedure for correction of cubitus varus deformity.

Accuracy of Conventional Triplane Measures Compared to 3-D Analysis for Assessment of Cubitus Varus Deformities in Adults

Purpose

Cubitus varus is a common triplane deformity in adults associated with supracondylar humeral fractures experienced as a child and consists of varus, extension, and internal rotation components. When corrective osteotomy is indicated, these three components should be measured precisely. This study aimed to evaluate the accuracy of radiographic and physical measurements of cubitus varus deformities in adults compared to values measured on three-dimensional (3-D) bone surface models of the adult bilateral humerus.

Methods

Three-dimensional bilateral humerus models were developed using bilateral humerus CT images of 20 adult patients with cubitus varus. The varus, internal rotation, and extension components of the deformity were assessed by superimposing the 3-D bone model onto a mirror-image model of the contralateral normal humerus. Values obtained from the radiographic and physical measurements were compared with those from the 3D model. The reliability of each measurement was assessed by calculating correlation coefficients (CCs).

Results

Radiographic measurements of the varus and extension components showed good reliability (CC = 0.796 and 0.791, respectively). Physical measurement of the varus component, however, showed only moderate reliability (CC= 0.539), while physical measurement of the extension and internal rotation components exhibited poor reliability (CC = 0.164 and 0.466, respectively).

Conclusion

Varus and extension components of cubitus varus in adults can be reliably measured using conventional methods, whereas the internal rotation component cannot. Thus, 3-D methods with which to quantify the rotational component preoperatively might be needed when the correction of a rotational deformity is considered.

Comparison of internal fixation vs. external fixation after corrective osteotomy in children with cubitus varus

BACKGROUND

Cubitus varus deformity is a well-known late complication of supracondylar fractures in children. In this retrospective study, the primary objective was to compare clinical and radiologic outcomes of lateral closing-wedge osteotomy with either internal fixation or external fixation in pediatric patients with cubitus varus deformities.

MATERIALS AND METHODS

From 2010 to 2017, 35 consecutive patients with cubitus varus deformities secondary to supracondylar fractures were included in this study. After corrective osteotomy was performed via a limited lateral approach, the method of definitive fixation was chosen between internal and external. Retrospectively, patients who underwent external fixation on the lateral aspect of the elbow were defined as group I (n = 16) whereas patients with unilateral single-plate fixation were defined as group II (n = 19). The functional outcome was evaluated using the Mayo Elbow Performance Score and Flynn criteria.

RESULTS

No significant difference in age was found between the 2 groups (P = .15). Significantly lower costs, a shorter operation duration, smaller scars, and a shorter time for plaster cast use postoperatively were found in group I (P < .001). No nonunion or failure of fixation was found. No significant difference was noted in postoperative elbow range of motion or Mayo Elbow Performance Score (P = .64). Both groups achieved satisfactory functional and cosmetic results.

CONCLUSIONS

In pediatric patients with cubitus varus, both methods of fixation after lateral closing-wedge corrective osteotomy are reliable, with a low rate of complications and satisfactory functional results. External fixation is more advantageous in terms of easier preoperative planning, shorter operative times, lower costs, and easier postoperative fixation removal.

Clinical application of individualized 3D-printed navigation template to children with cubitus varus deformity

Background

Cubitus varus deformity is a common sequela of elbow fractures in children. Cubitus varus deformity treatment is tending toward 3D correction, which is challenging for orthopedic surgeons. This study aims to explore whether individualized 3D-printed navigation templates can assist with accurate and effective corrective treatment of children with cubitus varus deformity.

Methods

Thirty-five patients were treated for cubitus varus deformity from June 2015 to April 2017, including 21 boys and 14 girls, aged 4.6–13.2 years (average, 7.5 years). Of these cases, 17 deformities were on the left side and 18 were on the right side. All were treated with wedge osteotomy of the lateral distal humerus. 3D-printed navigation templates were used in 16 cases, while traditional surgery was used in 19 cases. All patients underwent computed tomography scans before surgery. Computer software was used to analyze the measurements and design and print individualized navigation templates. The navigation templates were matched, and surgery was initially simulated. Intraoperative individualized navigation templates were used to assist with accurate osteotomy and Kirschner wire fixation. Operation times were recorded in all cases, the carrying angles before and after surgery were assessed by computer, and postoperative elbow joint function was evaluated using Bellemore criteria. All measurement data were presented as means ± SD, and Student’s t test was used to examine differences between groups. All count data between both groups were compared using the chi-square test or Fisher’s exact test analysis.

Results

All individualized navigation templates matched well with the corresponding anatomical markers and were consistent with preoperative planning, simulated surgery, and intraoperative procedures. Average operation times from clear exposure to fixed Kirschner wire were 11.69 min (9.6–13.5 min) for the individualized navigation template group and 22.89 min (17.7–26.8 min) for the traditional operation group (p < 0.001). Average differences in postoperation carrying angles between affected and healthy sides were 1.13° (0–2.0°) and 4.21° (0–7.5°), respectively (p < 0.001). Follow-up 6–12 months postoperation showed that elbow function did not differ significantly between groups using the Bellemore criteria (p > 0.05).

Conclusions

Individualized navigation templates simplify procedures, reduce operation time, and improve accuracy when used in orthopedic surgery to treat children with cubitus varus deformity.

Efficacy evaluation of three-dimensional printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity

BACKGROUND

This present study is aimed to retrospectively assess the efficacy of three-dimensional (3D) printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity.

MATERIAL AND METHODS

Twenty-five patients (15 males and 10 females) with the cubitus varus deformity from June 2014 to December 2017 were included in this study and were enrolled into the conventional group (n = 11) and 3D printing group (n = 14) according to the different surgical approaches. The operation time, intraoperative blood loss, osteotomy degrees, osteotomy end union time, and postoperative complications between the two groups were observed and recorded.

RESULTS

Compared with the conventional group, the 3D printing group has the advantages of shorter operation time, less intraoperative blood loss, higher rate of excellent correction, and higher rate of the parents' excellent satisfaction with appearance after deformity correction (P < 0.001, P < 0.001, P = 0.019, P = 0.023). Nevertheless, no significant difference was presented in postoperative carrying angle of the deformed side and total complication rate between the two groups (P = 0.626, P = 0.371).

CONCLUSIONS

The operation assisted by 3D printing osteotomy guide plate to correct the adolescent cubitus varus deformity is feasible and effective, which might be an optional approach to promote the accurate osteotomy and optimize the efficacy.

Oblique Lateral Closing-Wedge Osteotomy for Cubitus Varus in Skeletally Immature Patients

Background

We perform an oblique lateral closing-wedge osteotomy of the distal end of the humerus to correct cubitus varus deformity in children. This deformity is often the consequence of undertreatment, malreduction, or malunion of supracondylar humeral fractures¹. Although standard arcs of motion may be altered, cosmesis was traditionally considered a primary surgical indication. However, uncorrected cubitus varus leads to posterolateral rotatory instability of the elbow (PLRI)², lateral condylar fractures³, snapping medial triceps, and ulnar nerve instability⁴. A contemporary understanding of these delayed sequelae has expanded our current indications. Detailed parameters predictive of late sequelae are needed to further specify surgical indications.

Description

We remove an oblique lateral closing wedge from the distal end of the humerus via a standard lateral approach. The osteotomy is angled away from the varus joint line such that lateral cortices after reduction lack prominence. Kirschner wires provide adequate fixation in young patients. In older children, extension is simultaneously corrected, and fragments are stabilized via plate osteosynthesis.

Alternatives

Patients who decline surgery are counseled regarding risks of delaying treatment until symptoms are present. PLRI manifests as lateral elbow pain or instability while rising from a chair. Once symptomatic, the lateral ulnar collateral ligament (LUCL) is irreversibly attenuated and morphologic changes in the ulnohumeral joint necessitate more extensive surgery to include distal humeral osteotomy, LUCL reconstruction, and possibly ulnar nerve transposition⁵. Alternative osteotomy techniques are described and categorized as simple lateral closing wedge, step-cut^6-9, dome, 3-dimensional¹⁰, or distraction osteogenesis. Simple closing-wedge osteotomies include a distal cut parallel to the joint line and retain a problematic lateral prominence (if the medial cortex is intact or the distal end of the humerus is not translated medially)^11,12. Step-cut osteotomies theoretically minimize this lateral prominence while enhancing inherent stability. However, these additional cuts mandate wide surgical exposure despite similar outcomes¹³. Three-dimensional planning employs computed tomography to create expensive anatomic cutting guides that address varus, extension, and internal rotation. However, residual internal rotation is generally well tolerated, derotation is associated with loss of fixation, and the extension deformity will successfully remodel in patients who are <10 years old¹⁴. We employ 3-dimensional planning in skeletally mature patients with complex deformity and no remodeling potential.

Rationale

The oblique lateral closing wedge is ideal for skeletally immature patients because it is simple, reproducible, and efficient. It avoids the lateral prominence without increasing complexity or complications.

Increased incidence of distal humeral fracture surgery and decreased incidence of respective corrective osteotomy among Finns aged 0 to 18 years between 1987 and 2016: a population-based study

PURPOSE

Previous studies on paediatric and adolescent distal humeral fractures have reported an increase in surgical treatment activity. This increase could be hypothesized to reduce the incidence of corrective osteotomies. The aim of this study was to determine the incidence and trends of the primary surgical treatment of distal humeral fractures and corrective osteotomies in children and adolescents.

METHODS

All Finns 18 years of age or younger who underwent treatment for distal humeral fracture between 1987 and 2016 were included in this population-based study. Surgical treatment data were obtained from the National Hospital Discharge Register of Finland. In calculating annual surgery incidence rates, the annual mid-year populations were obtained from the Official Statistics Finland. Surgical treatment was categorized into four groups; reposition and casting, osteosynthesis, external fixation and corrective osteotomy.

RESULTS

During the 30-year study period, 9017 surgical procedures were performed in Finland with the primary or secondary diagnosis code being a distal humeral fracture. Of these, 6961 (77.2%) were osteosynthesis and the incidence of osteosynthesis (per 100 000 person-years) increased fourfold from 8.2 in 1987 to 34.1 in 2016. In the same 30-year study period, the total number of corrective osteotomies was low (151) with annual variation from one to 16. The incidence of corrective osteotomies (per 100 000 person-years) decreased sevenfold from 0.7 to 0.1.

CONCLUSION

The incidence of surgical treatment with osteosynthesis in distal humeral fractures increased fourfold in Finland between 1987 and 2016. During the same time period, the number of corrective osteotomies diminished significantly.

LEVEL OF EVIDENCE

IV.

Three-Dimensional Corrective Osteotomy for Malunited Fractures of the Upper Extremity Using Patient-Matched Instruments: A Prospective, Multicenter, Open-Label, Single-Arm Trial

BACKGROUND

Medical image processing has facilitated simulation of 3-dimensional (3-D) corrective osteotomy, and 3-D rapid prototyping technology has further enabled the manufacturing of patient-matched surgical guides and implants (patient-matched instruments, or PMIs). However, 3-D corrective osteotomy using these technologies has not been the standard procedure. We aimed to prospectively verify the efficacy and safety of PMIs in corrective osteotomy for deformities of the upper extremity.

METHODS

We enrolled 16 patients with a total of 17 bone deformities in the upper extremity. Eight patients had distal radial malunion; 5, distal humeral malunion; and 3, forearm diaphyseal malunion. All cases underwent 3-D corrective osteotomy with PMIs. The primary end point was the residual maximum deformity angle (MDA), which was calculated from 2 deformity angles-1 on the anteroposterior and 1 on the lateral postoperative radiograph. Secondary end points included the deformity angle on radiographs, 3-D error between the preoperative planning model and the postoperative result, range of motion, grip strength, pain measured with a visual analog scale (VAS), patient satisfaction, and Disabilities of the Arm, Shoulder and Hand (DASH) score.

RESULTS

The average MDA significantly improved from 25.5° preoperatively to 3.3° at the final follow-up (p < 0.001). The angular deformity was within 5° in all cases, except for 1 with distal radial malunion who had a higher angle on the anteroposterior radiograph. The error between the correction seen on the postoperative 3-D bone model and the planned correction was <1° and <1 mm. Flexion and extension of the wrist and pronation of the forearm of the patients treated for distal radial malunion improved significantly, and pronation improved for those treated for forearm diaphyseal malunion. The average VAS score, grip strength, and DASH score significantly improved as well. Of the 16 patients, 15 were very satisfied or satisfied with the outcomes.

CONCLUSIONS

Corrective osteotomy using PMIs achieved accurate correction and good functional recovery in the upper extremity. Although our study was limited to cases without any deformity on the contralateral side, 3-D corrective osteotomy using PMIs resolved treatment challenges for complex deformities in upper extremities.

LEVEL OF EVIDENCE

Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence.

Paediatric supracondylar humeral fractures: the effect of the surgical specialty on the outcomes

PURPOSE

The effect of surgical specialty on the outcomes of paediatric patients treated for displaced supracondylar humeral fractures remains unclear. The results of residents, paediatric surgeons and orthopaedic surgeons were compared.

METHODS

A retrospective review of 108 children (0 to 16 years) treated for displaced humeral supracondylar fractures (Gartland II or III) requiring closed or open reduction under general anaesthesia were included. The patient charts and radiographs were evaluated to identify type, grade and neurovascular complications. Operative performance (operative time, quality of reduction, need for open reduction, complications) of residents, paediatric surgeons and orthopaedic surgeons were evaluated.

RESULTS

Residents used a crossed pin configuration for patients in 25/25 (100%), paediatric surgeons in 25/32 (78%) and orthopaedic surgeons in 33/33 (100%) (p = 0.0011). Loss of reduction was present in one patient treated with crossed pins, in two with lateral pins and in two without Kirschner-wires (p = 0.0034). The risk ratio of an unacceptable reduction was 4.0 (95% confidence interval (CI) 0.90 to 18, p = 0.070) for residents and 6.6 (95% CI 1.6 to 27, p = 0.0082) for paediatric surgeons as compared with orthopaedic surgeons. Complications were present in 37% of patients (11/30) for residents, 55% (24/44) for paediatric surgeons and 15% (5/34) for orthopaedic surgeons (p = 0.0013).

CONCLUSION

We found statistically significant differences in the incidence of unacceptable reduction, complications and the usage of crossed pin configuration between the surgical specialties. Patients would benefit from the practice of assigning the operative treatment of displaced supracondylar fractures to orthopaedic surgeons.

LEVEL OF EVIDENCE

Level III.

Application of computer simulation in the treatment of traumatic cubitus varus deformity in children

Cubitus varus deformity is common in children. The purpose of this study was to assess the usefulness of computer simulation based on three-dimensional computed tomography (3D-CT) reconstruction with regard to preoperative planning and surgical treatment in children with traumatic cubitus varus deformity.The study included 13 patients with traumatic cubitus varus deformity between January 2012 and January 2015. The original 3D-CT data were transferred to Mimics 10.01 software. Special tools were used for simulation of supracondylar lateral wedge osteotomy of the humerus. Intraoperative elbow arthrography was used to identify the articular surface of the elbow joint for assisting the judgment of the osteotomy site. Kirschner wires were used to determine the osteotomy plane and angle. The osteotomy site was fixed by crossing Kirschner wires and steel wire tension band.Of the 13 patients, 11 were male and 2 were female. The left side was affected in 8 patients, and the right side was affected in 5 patients. The patient age ranged from 2 years to 14 years (mean age, 6 years and 7 months). The varus angle ranged from 12° to 35° (mean angle, 20°). The carrying angle on the contralateral side ranged from 5° to 18° (mean angle, 10°). The varus deformities showed good correction. The 13 patients were followed up for 24 to 60 months (mean follow-up, 38 months). According to the Flynn score of elbow joint function after surgery: 10 patients had excellent function, 2 had good function, and 1 had fair function. The excellent rate was 92.3%. At the final follow-up, the ipsilateral carrying angle ranged from 4° to 15° (mean angle, 11°).Computer simulation based on 3D-CT reconstruction can provide good information on the right humeral osteotomy position and osteotomy angle. It can guide the actual operation and provide better results after surgery. Intraoperative elbow arthrography is useful to determine the level of elbow joint osteotomy, and it can assist in the operation.Level of evidence: Level IV-retrospective case, treatment study.

A new osteotomy for the prevention of prominent lateral condyle after cubitus varus correctional surgery-made possible by a 3D printed patient specific osteotomy guide: A case report

•

Skeletal deformity surgery is a difficult procedure which requires meticulous planning.

•

Good results demand precise application of the surgical plan during the surgery.

•

3D software helps to make precise surgical plans and design case specific surgical tools.

•

3D printing of case specific tools renders surgery easy and precise.

Introduction

Skeletal deformity correction is a procedure of high aesthetic and functional demand. Therefore, meticulous surgical planning has always been mandatory. However, it is known that during the surgery things may often get slippery, leaving the surgeon no chance but improvisation. Because of this shortcoming it is not a rare occasion to find unhappy patients that have undergone deformity correction surgery.

Presentation of case

Our patient was an eighteen-year-old male who had 40° cubitus varus deformity (with 20° flexion and extension deficits) due to a right humerus supracondylar fracture, obtained eight years ago. He had two prior surgeries at the year of injury. Considering the severity of the deformity we decided to plan the surgery with 3D software, obtain 3D printed models (to further help with surgical fixation options) and finally, use a custom 3D printed resection guide to apply the plan during the surgery.

Discussion

Traditional methods of skeletal deformity correction lack the preoperative precision and tools to perform the plan during the surgery. Deformity correction with 3D images and 3D printed patient specific instruments do help the surgeon to accomplish correct deformities with results identical to surgical plan.

Conclusion

Superior precision of the 3D planning and very easy utilization of the patient specific 3D printed instruments during the skeletal deformity surgery provides unparalleled and foreseeable results. This methodology is prone to be gold standard for deformity surgery in the near future.

[Dual-planar osteotomy and lateral column anatomic locking plate fixation in the treatment of adult cubitus varus deformity]

Objective

To explore the effectiveness of distal humeral dual-planar osteotomy followed with distal humeral lateral column anotomical locking plate fixation in the treatment of adult cubitus varus deformity combined with flexion restriction.

Methods

The clinical data of 6 adult patients with cubitus varus deformity and flexion restriction treated with dual-planar osteotomy and internal fixation between April 2012 and September 2014 were reviewed. There were 3 males and 3 females with an average age of 22.2 years (range, 18-35 years). All the patients had history of elbow injury in childhood, the age being injured was 6.5 years on average (range, 2-13 years). There was no nerve injury, elbow strength weak, or unstable complications before admission. The preoperative elbow flexion was (107.50±5.24)°, elbow extension was (-12.17±3.48)°; the carring angle was (-19.50±4.46)°, the contralateral elbow carrying angle was (11.50±2.67)°; the length of humerus was (0.42±0.38) cm shorter than the unaffected humerus. The postoperative carrying angles, elbow flexion and extension, and humerus length were recorded. The modified Laupattarakasem criteria in which the comparison of bilateral elbow range of motion excluded was used to evaluate the results.

Results

Primary healing of incision was got in all patients and there was no early postoperative complications. All the patients were followed up 19-27 months (mean, 20.8 months). During the follow-up, there was no complication such as loosening and breakage of the internal fixators and all fractures were healed within 3 months after operation. At last follow-up, the elbow flexion was (124.17±5.85)°, the elbow extension was (0.83±2.04)°, the carrying angle was (12.00±4.19)°, and the humerus shortening was (1.88±0.45) cm, all showing significant difference when compared with preoperative ones ( t=-6.742, P=0.001; t=-11.068, P=0.000; t=-20.400, P=0.000; t=-13.914, P=0.000). According to the modified Laupattarakasem criteria, 1 case was excellent, 4 were good, and 1 was fair with an excellent and good rate of 83.3%.

Conclusion

Normal carrying angle can be restored and elbow flexion can be increased by coronal closing wedge and sagittal trapezoid dual-planar osteotomy, single lateral anatomical locking plate fixation is available for early mobilization.

Cubitus Varus-It's More Than Just a Crooked Arm!

Although cubitus varus has been regarded as a purely cosmetic problem in the pediatric population, symptomatic elbow instability, and ulnar neuropathy from the mechanical axis malalignment have been reported in adults. This overview discusses the biomechanical axis disruption that leads to soft tissue and morphologic bony alterations in the elbow and offers a compelling argument for corrective osteotomy to treat pediatric cubitus varus.

[Corrective osteotomies for posttraumatic elbow deformities]

OBJECTIVES

Correcion of elbow joint deformities that usually develop secondary to direct or indirect trauma of the arm or elbow with subsequent inadequate healing and consecutive axial/rotational malalignment and may be associated with cosmetic or functional deficits of the arm.

INDICATIONS

Relevant malalignment of the arm axis with corresponding cosmetic or functional deficits for the patient.

CONTRAINDICATIONS

Pre-existing degenerative and chronic inflammatory changes.

SURGICAL TECHNIQUE

Generally, two-dimensional supracondylar open or closed wedge osteotomies are used. In the presence of a three-dimensional deformity (with rotational component), an additional derotational correction is necessary. Extra-articular deformities following extension fractures should be treated preferably with an open wedge osteotomy, extra-articular deformities of flexion fractures with a closed wedge osteotomy. Valgus/varus deformities may also require a closed/open wedge osteotomy primarily through a dorsal or alternatively radial approach.

POSTOPERATIVE MANAGEMENT

The arm should be immobilized with a brachial cast splint for 2-3 weeks, with passive exercises of the elbow starting on postoperative day 7.

RESULTS

In general, the results for a three-dimensional osteotomy of the distal humerus are expected to be good to very good. Only in rare cases (2.5%) is a mostly transient irritation of the ulnar nerve observed.