Storage of 1000 holograms with use of a dual-wavelength method

Volume holographic spatial mode demultiplexer with a dual-wavelength method

Volume holographic demultiplexers (VHDMs) provide spatial mode demultiplexing using simple optical systems. However, applying VHDM to practical optical communication systems is difficult, as typical holographic media have no sensitivity in the infrared region, which includes optical transmission bands. In this paper, we propose a VHDM scheme combined with a dual-wavelength method (DWM). Using the DWM, VHDMs are able to perform mode demultiplexing in the optical transmission bands. We experimentally demonstrated the basic operation of our proposal using experiments performed at an 850-nm wavelength. In addition, we performed numerical simulations to investigate the application of VHDM to the C-band.

Mode demultiplexer using angularly multiplexed volume holograms

This study proposes a volume holographic demultiplexer (VHDM) for extracting the spatial modes excited in a multimode fiber. A unique feature of the demultiplexer is that it can separate a number of multiplexed modes output from a fiber in different directions by using multi-recorded holograms without beam splitters, which results in a simple configuration as compared with that using phase plates instead of holograms. In this study, an experiment is conducted to demonstrate the basic operations for three LP mode groups to confirm the performance of the proposed VHDM and to estimate the signal-to-crosstalk noise ratio (SNR). As a result, an SNR of greater than 20 dB is obtained.

Selective multimode excitation using volume holographic mode multiplexer

We propose a mode multiplexer based on volume holograms to realize a simple and efficient mode-division-multiplexed transmission system that supports a large number of modes. Selective multiexcitation of three spatial modes into a conventional multimode fiber is experimentally demonstrated. This device could potentially multiplex 10 or more modes. Future perspectives of the mode multiplexer for application in mode-division multiplexing are also discussed.

Spherical beam volume holograms for spectroscopic applications: modeling and implementation

The spherical beam volume hologram, recorded by a plane wave and a spherical beam, is investigated for spectroscopic applications in detail. It is shown that both the diffracted and the transmitted beam can be used for spectroscopy when the hologram is read with a collimated beam. A new method is introduced and used for analysis of the spherical beam volume hologram that can be extended for analysis of arbitrary holograms. Experimental results are consistent with the theoretical study. It is shown that the spherical beam volume hologram can be used in a compact spectroscopic configuration when the transmitted beam is monitored. Also, on the basis of the properties of the spherical beam hologram, the response of a hologram recorded by a plane wave and an arbitrary pattern is predicted. The information can be used to optimize holographic spectrometer design.

Qualitative demonstration of spectral diversity filtering using spherical beam volume holograms

We investigate the feasibility of designing spectral diversity filters using spherical beam volume holograms. Our experimental results qualitatively show the separation of the information of different incident wavelength channels using spherical beam volume holograms. The major trade-off in using these holograms is between the degree of spatial spectral diversity and the number of allowed spatial modes (or the divergence angle) of the incident beam.

Dependence of the Bragg condition on an external electric field for a polymeric photorefractive material

We investigated the effect of an applied electric field on the Bragg condition of degenerate four-wave mixing a polymeric photorefractive material with a low glass-transition temperatue. For a polymeric photorefractive material the application of an external electric field is necessary for photorefractivity leads to birefringence of the material by poling of the nonlinear optical chromophore. Because the propagation vectors of the pumping and reading beams inside the material are influenced by the refractive index of the material, the Bragg condition depends on the magnitude of the external field. Using an oriented gas model and the-coupled-mode theory, we numerically analyzed the Bragg-mismatch effect that causes a reduction in diffraction efficiency as a function of an external field. We present the boundary conditions for sample thickness and grating spacing for which the Bragg-mismatch effect must be taken into account.

Sparse modulation coding for increased capacity in volume holographic storage

In page-oriented memories, data pages commonly consist of comparable numbers of on and off pixels. Data-page sparsity is defined by reduction of the number of on pixels per page, leading to an increased diffracted power into each pixel. When page retrieval is dominated by a fixed noise floor, the number of pages in the memory is limited by the pixel diffraction efficiency. Sparsity increases the number of storable pages while reducing the amount of user information per page. A detailed analysis of sparsity in volume holographic memories shows that the total memory capacity can be increased by 15% by use of data pages that contain on average 25% on pixels. Sparsity also helps to reduce the effects of interpixel cross talk by strongly reducing the probability that worst-case pixel patterns (e.g., blocks of on pixels with a center off pixel) will occur in the data page. Enumeration block coding techniques provide construction of sparse-data pages with minimal overhead. In addition, enumeration coding offers maximum-likelihood detection with low encoding-decoding latency. We discuss the theoretical advantages of data-page sparsity. We also present experimental results that demonstrate the proposed capacity gain. The experiment verifies that it is practical to construct and use sparse-data pages that result in an overall user capacity gain of 16% subject to a page retrieval bit-error rate of 10(-4).