Temporal dependence of the enhancement of material removal in femtosecond-nanosecond dual-pulse laser-induced breakdown spectroscopy

Tomography of double-pulse laser-induced plasmas in the orthogonal geometry

The temporal evolution of laser-induced plasmas is studied in the orthogonal double-pulse arrangement. Both the pre-ablation mode (an air spark is induced above the sample surface prior to the ablation pulse) and the re-heating mode (additional energy is delivered into the plasma created by the ablation pulse) is considered. The plasmas are investigated in terms of the temporal evolution of their electron density, temperature, and volume. The plasma volumes are determined using a time-resolved tomography technique based on the Radon transformation. The reconstruction is carried out for both white-light and band-pass filtered emissivities. The white-light reconstruction corresponds to the overall size of the plasmas. On the other hand, the band-pass emissivity reconstruction shows the distribution of the atomic sample species (Cu I). Moreover, through spectrally resolved tomographic reconstruction, the spatial homogeneity of the electron density and temperature of the plasmas is also investigated at various horizontal slices of the plasmas. Our results show that the pre-ablation geometry yields a more temporally stable and spatially uniform plasma, which could be beneficial for calibration-free laser-induced breakdown spectroscopy (LIBS) approaches. On the contrary, the plasma generated in the re-heating geometry exhibits significant variations in electron density and temperature along its vertical axis. Overall, our results shed further light on the mechanisms involved in the LIBS signal enhancement using double-pulse ablation.

Laser-Induced Breakdown Spectroscopy: Fundamentals, Applications, and Challenges

Laser-induced breakdown spectroscopy (LIBS) is a technique that provides an accurate in situ quantitative chemical analysis and, thanks to the developments in new spectral processing algorithms in the last decade, has achieved a promising performance as a quantitative chemical analyzer at the atomic level. These possibilities along with the fact that little or no sample preparation is necessary have expanded the application fields of LIBS. In this paper, we review the state of the art of this technique, its fundamentals, algorithms for quantitative analysis or sample classification, future challenges, and new application fields where LIBS can solve real problems.

Highly sensitive analysis of boron and lithium in aqueous solution using dual-pulse laser-induced breakdown spectroscopy

We have applied a dual-pulse laser-induced breakdown spectroscopy (DP-LIBS) to sensitively detect concentrations of boron and lithium in aqueous solution. Sequential laser pulses from two separate Q-switched Nd:YAG lasers at 532 nm wavelength have been employed to generate laser-induced plasma on a water jet. For achieving sensitive elemental detection, the optimal timing between two laser pulses was investigated. The optimum time delay between two laser pulses for the B atomic emission lines was found to be less than 3 μs and approximately 10 μs for the Li atomic emission line. Under these optimized conditions, the detection limit was attained in the range of 0.8 ppm for boron and 0.8 ppb for lithium. In particular, the sensitivity for detecting boron by excitation of laminar liquid jet was found to be excellent by nearly 2 orders of magnitude compared with 80 ppm reported in the literature. These sensitivities of laser-induced breakdown spectroscopy are very practical for the online elemental analysis of boric acid and lithium hydroxide serving as neutron absorber and pH controller in the primary coolant water of pressurized water reactors, respectively.

Enhanced temperature and emission from a standoff 266 nm laser initiated LIBS plasma using a simultaneous 10.6 microm CO2 laser pulse

A deep UV 266 nm laser induced LIBS plasma has been enhanced by using a simultaneous 10.6 microm CO(2) laser pulse at standoff ranges up to 55 m for several targets including metals, ceramics and plastics. The LIBS plasma emission was produced, for the first time, by a 266 nm laser and was enhanced by several orders of magnitude using the CO(2) laser pulse. The temperature of the enhanced LIBS plasma was measured, for the first time, and was observed to increase by about 3000K due to the addition of the CO(2) laser pulse.

Observations in collinear femtosecond-nanosecond dual-pulse laser-induced breakdown spectroscopy

In the work reported herein, we have combined a short-lived femtosecond laser-induced plasma (LIP) and a longer-lived nanosecond LIP in a collinear pulse configuration to examine the source(s) of atomic emission and signal-to-noise enhancement in dual-pulse laser-induced breakdown spectroscopy (LIBS). Initial studies indicate that the primary source of dual-pulse LIBS enhancement in the collinear configuration may in large part be a matter of pulse focus; focusing on the sample surface, for example, yields atomic emission enhancements whose lifetime correlates reasonably well with the femtosecond LIP emissive lifetime, suggesting that plasma-plasma coupling may play an important role at that pulse focus. At a second "optimal" focal position above the sample surface, alternatively, atomic emission and signal-to-noise enhancements correlate quite well with the nitrogen and oxygen atomic emission reductions previously seen following use of a femtosecond air spark and a nanosecond ablative pulse in the orthogonal dual-pulse configuration, suggesting that pressure or number density reductions due to femtosecond LIP formation in air may be significant at that pulse focus.