Full-field optical coherence tomography using immersion Mirau interference microscope

Mirau-based line-field confocal optical coherence tomography for three-dimensional high-resolution skin imaging

SIGNIFICANCE

Line-field confocal optical coherence tomography (LC-OCT) is a recently introduced high-resolution imaging modality based on a combination of low-coherence optical interferometry and reflectance confocal optical microscopy with line illumination and line detection. Capable of producing three-dimensional (3D) images of the skin with cellular resolution, in vivo, LC-OCT has been mainly applied in dermatology and dermo-cosmetology. The LC-OCT devices capable of acquiring 3D images reported so far are based on a Linnik interferometer using two identical microscope objectives. In this configuration, LC-OCT cannot be designed to be a very compact and light device, and the image acquisition speed is limited.

AIM

The objective of this work was to develop a more compact and lighter LC-OCT device that is capable of acquiring images faster without significant degradation of the resolution and with optimized detection sensitivity.

APPROACH

We developed an LC-OCT device based on a Mirau interferometer using a single objective. Dynamic adjustment of the camera frequency during the depth scan is implemented, using a faster camera and a more powerful light source. The reflectivity of the beam-splitter in the Mirau interferometer was optimized to maximize the detection sensitivity. A galvanometer scanner was incorporated into the device for scanning the illumination line laterally. A stack of adjacent B-scans, constituting a 3D image, can thus be acquired.

RESULTS

The device is able to acquire and display B-scans at 17 fps. 3D images with a quasi-isotropic resolution of ∼1.5 μm (1.3, 1.9, and 1.1 μm in the x , y, and z directions, respectively) over a field of 940 μm × 600 μm × 350 μm (x × y × z) can be obtained. 3D imaging of human skin at cellular resolution, in vivo, is reported.

CONCLUSIONS

The acquisition rate of the B-scans, at 17 fps, is unprecedented in LC-OCT. Compared with the conventional LC-OCT devices based on a Linnik interferometer, the reported Mirau-based LC-OCT device can acquire B-scans ∼2 times faster. With potential advantages in terms of compactness and weight, a Mirau-based device could easily be integrated into a smaller and lighter handheld probe for use by dermatologists in their daily medical practice.

An Improved Large-Field Microscopic Speckle Interferometry System for Dynamic Displacement Measurement of MEMS

The traditional microscopic speckle interferometer has limited applications in engineering due to its small field of view. In this paper, we propose a large-field microscopic speckle interferometer which embeds two doublet lens groups in the improved Mach–Zehnder optical path structure to expand its field of view. At the same time, the new system can reduce the coherent noise of reflected light in the optical path. We use this new system to measure the dynamic displacement process of the entire surface of the microchips. The experimental results show that our improved measurement system can achieve large-field, real-time and high-precision dynamic measurement of micro-electromechanical systems (MEMS).

Mirau-based line-field confocal optical coherence tomography

Line-field confocal optical coherence tomography (LC-OCT) is an imaging technique in which A-scans are acquired in parallel through line illumination with a broadband laser and line detection with a line-scan camera. B-scan imaging at high spatial resolution is achieved by dynamic focusing in a Linnik interferometer. This paper presents an LC-OCT device based on a custom-designed Mirau interferometer that offers similar spatial resolution and detection sensitivity. The device has the advantage of being more compact and lighter. In vivo imaging of human skin with a resolution of 1.3 µm × 1.1 µm (lateral × axial) is demonstrated over a field of 0.9 mm × 0.4 mm (lateral × axial) at 12 frames per second.

Focus defect and dispersion mismatch in full-field optical coherence microscopy

Full-field optical coherence microscopy (FFOCM) is an optical technique, based on low-coherence interference microscopy, for tomographic imaging of semi-transparent samples with micrometer-scale spatial resolution. The differences in refractive index between the sample and the immersion medium of the microscope objectives may degrade the FFOCM image quality because of focus defect and optical dispersion mismatch. These phenomena and their consequences are discussed in this theoretical paper. Experimental methods that have been implemented in FFOCM to minimize the adverse effects of these phenomena are summarized and compared.

Simultaneous polarization Mirau interferometer based on pixelated polarization camera

We propose a polarization Mirau interferometer using the pixelated polarization camera to acquire the four phase-shifted interferograms simultaneously by which motionless phase shift can be realized. A wire-grid polarizer is employed as the polarization beam splitter to realize the adjustable fringe contrast. Due to the limited contrast ratio of split orthogonally polarized beams with a wire grid polarizer, the corresponding calibration method by superposition of exchanged transmitted and reflected beams is proposed to obtain the uniform fringe contrast in four phase-shifted interferograms. The accuracy of the proposed system is demonstrated experimentally, and a precision better than 1/500 wavelength is achieved. The proposed system provides a feasible way to obtain the instantaneous measurement with minimizing environmental disturbance.