Short-coherence off-axis holographic phase microscopy of live cell dynamics

Ultrabroadband Optical Diffraction Tomography

Optical diffraction tomography (ODT) is a powerful noninvasive 3D imaging technique, but its combination with broadband light sources is difficult. In this study, we introduce ultrabroadband ODT, covering over 150 nm of visible spectral bandwidth with a lateral spatial resolution of 150 nm. Our work addresses a critical experimental gap by enabling the measurement of broadband refractive index changes in 3D samples, crucial information that is difficult to assess with existing methodologies. We present broadband, spectrally resolved ODT images of HeLa cells, obtained via pulse-shaping-based Fourier transform spectroscopy. The spectral observations enabled by ultrabroadband ODT, combined with material-dependent refractive index responses, allow for precise three-dimensional identification of nanoparticles within cellular structures. Our work represents a crucial step toward time and spectrally resolved tomography of complex 3D structures with implications for life and materials science applications.

P-TDHM: Open-source portable telecentric digital holographic microscope

We present the design of a low-cost, portable telecentric digital holographic microscope (P-TDHM) that utilizes off-the-shelf components. We describe the system's hardware and software elements and evaluate its performance by imaging samples ranging from nano-printed targets to live HeLa cells, HEK293 cells, and Dolichospermum via both in-line and off-axis modes. Our results demonstrate that the system can acquire high quality quantitative phase images with nanometer axial and sub-micron lateral resolution in a small form factor, making it a promising candidate for resource-limited settings and remote locations. Our design represents a significant step forward in making telecentric digital holographic microscopy accessible and affordable to the broader community.

Speckle-resolved optical coherence tomography for mesoscopic imaging within scattering media

Light scattering poses a challenge for imaging deep in scattering media as the ballistic light exponentially attenuates with depth. In contrast to the ballistic light, the multiply scattered light penetrates deeper and also contains information about the sample. One technique to image deeper is to selectively detect only a subset of the multiply scattered light, namely the 'snake' photons, which are predominantly forward scattered and retain more direct information than the more strongly scattered light. In this work, we develop a technique, termed speckle-resolved optical coherence tomography (srOCT), for efficiently detecting these 'snake' photons to enable imaging deeper in scattering media. The system couples spatio-angular filtering with speckle-resolved interferometric detection to preferentially and efficiently detect the weakly scattered 'snake' photons. With our proof-of-concept system, we demonstrate depth-resolved imaging beyond the ballistic limit, up to a depth of 90 round-trip MFPs in a scattering phantom and a depth of 4.5 mm of chicken tissue at 0.4 mm axial and lateral resolution.

Single-shot ultrafast sequential holographic imaging with high temporal resolution and a large field of view

A compact system for single-shot sequential holographic imaging (SSSHI) with high temporal resolution and a large field of view is proposed. In this system, a specially designed sequence pulse train generator with a group of diffractive gratings inserted is adopted to simultaneously generate the probe pulse train and the reference pulse train required for recording a single-shot spatial frequency division multiplexing hologram. The system successfully overcomes the walk-off effect of the ultrashort pulse laser in SSSHI and, hence, effectively avoids the influence of the short coherence of ultrashort pulses on the spatial resolution (or field of view) of SSSHI; the complexity of the system and the difficulty in the precise synchronous alignment of the probe and the reference pulses also can be greatly reduced. An experimental setup of the system was constructed, and a SSSHI of dynamical air plasmas induced by a femtosecond pulse laser is successfully realized.

Snapshot quantitative phase microscopy with a printed film

This paper proposes a low-cost snapshot quantitative phase imaging approach. The setup is simple and adds only a printed film to a conventional microscope. The phase of a sample is regarded as an additional aberration of the optical imaging system. And the image captured through a phase object is modeled as the distorted version of a projected pattern. An optimization algorithm is utilized to recover the phase information via distortion estimation. We demonstrate our method on various samples such as a micro-lens array, IMR90 cells and the dynamic evaporation process of a water drop, and our approach has a capability of real-time phase imaging for highly dynamic phenomenon using a traditional microscope.

Off-axis digital holography with multiplexed volume Bragg gratings

We report on an optical imaging design based on common-path off-axis digital holography, using a multiplexed volume Bragg grating. In the reported method, a reference optical wave is made by deflection and spatial filtering through a volume Bragg grating. This design has several advantages, including simplicity, stability, and robustness against misalignment.

Tomographic phase microscopy: principles and applications in bioimaging [Invited]

Tomographic phase microscopy (TPM) is an emerging optical microscopic technique for bioimaging. TPM uses digital holographic measurements of complex scattered fields to reconstruct three-dimensional refractive index (RI) maps of cells with diffraction-limited resolution by solving inverse scattering problems. In this paper, we review the developments of TPM from the fundamental physics to its applications in bioimaging. We first provide a comprehensive description of the tomographic reconstruction physical models used in TPM. The RI map reconstruction algorithms and various regularization methods are discussed. Selected TPM applications for cellular imaging, particularly in hematology, are reviewed. Finally, we examine the limitations of current TPM systems, propose future solutions, and envision promising directions in biomedical research.

Dual-wavelength off-axis digital holography using a single light-emitting diode

We propose a new low-coherence interferometry system for dual-wavelength off-axis digital holography. By utilizing diffraction gratings, two beams with narrower bandwidths and different center wavelengths could be filtered in a single light-emitting diode. The characteristics of the system are analytically determined to extend the coherence length and field-of-view enough for off-axis configuration. The proposed system enables the fast and accurate measurement of the surface profile with more than a micrometer step height and less noise. The performance of the system is verified by the experimental results of a standard height sample.

Compact interferometric module for full-field interferometric phase microscopy with low spatial coherence illumination

We propose a compact and external off-axis interferometric module that can achieve interference with low spatial coherence illumination over the entire field of view. The interferometer is easy to align and stable and can be connected to the output of an existing microscope illuminated with a low spatial coherence light source, thus allowing quantitative phase imaging with a low degree of spatial noise. We demonstrate the imaging and the interference properties of the proposed interferometric module and use it for quantitative phase imaging of reflective samples.

Single-shot quantitative phase microscopy with color-multiplexed differential phase contrast (cDPC)

We present a new technique for quantitative phase and amplitude microscopy from a single color image with coded illumination. Our system consists of a commercial brightfield microscope with one hardware modification-an inexpensive 3D printed condenser insert. The method, color-multiplexed Differential Phase Contrast (cDPC), is a single-shot variant of Differential Phase Contrast (DPC), which recovers the phase of a sample from images with asymmetric illumination. We employ partially coherent illumination to achieve resolution corresponding to 2× the objective NA. Quantitative phase can then be used to synthesize DIC and phase contrast images or extract shape and density. We demonstrate amplitude and phase recovery at camera-limited frame rates (50 fps) for various in vitro cell samples and c. elegans in a micro-fluidic channel.

Quadriwave lateral shearing interferometric microscopy with wideband sensitivity enhancement for quantitative phase imaging in real time

Real-time quantitative phase imaging has tremendous potential in investigating live biological specimens in vitro. Here we report on a wideband sensitivity-enhanced interferometric microscopy for quantitative phase imaging in real time by employing two quadriwave lateral shearing interferometers based on randomly encoded hybrid gratings with different lateral shears. Theoretical framework to analyze the measurement sensitivity is firstly proposed, from which the optimal lateral shear pair for sensitivity enhancement is also derived. To accelerate the phase retrieval algorithm for real-time visualization, we develop a fully vectorized path-independent differential leveling phase unwrapping algorithm ready for parallel computing, and the framerate for retrieving the phase from each pair of two 4 mega pixel interferograms is able to reach 47.85 frames per second. Experiment results demonstrate that the wideband sensitivity-enhanced interferometric microscopy is capable of eliminating all the periodical error caused by spectral leaking problem and reducing the temporal standard deviation to the half level compared with phase directly retrieved by the interferogram. Due to its high adaptability, the wideband sensitivity-enhanced interferometric microscopy is promising in retrofitting existing microscopes to quantitative phase microscopes with high measurement precision and real-time visualization.

In-vivo retinal imaging with off-axis full-field time-domain optical coherence tomography

With a simple setup, mainly composed of a low coherence light source and a camera, full-field optical coherence tomography (FF-OCT) allows volumetric tissue imaging. However, fringe washout constrains its use in retinal imaging. Here, we present a novel motion-insensitive approach to FF-OCT, which introduces path-length differences between the reference and the sample light in neighboring pixels using an off-axis reference beam. The temporal carrier frequency in scanned time-domain OCT is replaced by a spatial carrier frequency. Volumetric in-vivo FF-OCT measurements of the human retina were acquired in only 1.3 s, comparable to the acquisition times of current clinically used OCT devices.

Dynamic phase differences based on quantitative phase imaging for the objective evaluation of cell behavior

Quantitative phase imaging (QPI) brought innovation to noninvasive observation of live cell dynamics seen as cell behavior. Unlike the Zernike phase contrast or differential interference contrast, QPI provides quantitative information about cell dry mass distribution. We used such data for objective evaluation of live cell behavioral dynamics by the advanced method of dynamic phase differences (DPDs). The DPDs method is considered a rational instrument offered by QPI. By subtracting the antecedent from the subsequent image in a time-lapse series, only the changes in mass distribution in the cell are detected. The result is either visualized as a two dimensional color-coded projection of these two states of the cell or as a time dependence of changes quantified in picograms. Then in a series of time-lapse recordings, the chain of cell mass distribution changes that would otherwise escape attention is revealed. Consequently, new salient features of live cell behavior should emerge. Construction of the DPDs method and results exhibiting the approach are presented. Advantage of the DPDs application is demonstrated on cells exposed to an osmotic challenge. For time-lapse acquisition of quantitative phase images, the recently developed coherence-controlled holographic microscope was employed.

Quantitative phase microscopy with off-axis optical coherence tomography

We have developed a modality for quantitative phase imaging within spectral domain optical coherence tomography based on using an off-axis reference beam. By tilting the propagation of the reference beam relative to that of the sample beam, a spatially varying fringe is generated. Upon detection of this fringe using a parallel spectral domain scheme, the fringe can be used to separate the interference component of the signal and obtain the complex sample field. In addition to providing quantitative phase measurements within a depth resolved measurement, this approach also allows elimination of the complex conjugate artifact, a known limitation of spectral interferometry. The principle of the approach is described here along with demonstration of its capabilities using technical samples.

Effects of spatial coherence in diffraction phase microscopy

Quantitative phase imaging systems using white light illumination can exhibit lower noise figures than laser-based systems. However, they can also suffer from object-dependent artifacts, such as halos, which prevent accurate reconstruction of the surface topography. In this work, we show that white light diffraction phase microscopy using a standard halogen lamp can produce accurate height maps of even the most challenging structures provided that there is proper spatial filtering at: 1) the condenser to ensure adequate spatial coherence and 2) the output Fourier plane to produce a uniform reference beam. We explain that these object-dependent artifacts are a high-pass filtering phenomenon, establish design guidelines to reduce the artifacts, and then apply these guidelines to eliminate the halo effect. Since a spatially incoherent source requires significant spatial filtering, the irradiance is lower and proportionally longer exposure times are needed. To circumvent this tradeoff, we demonstrate that a supercontinuum laser, due to its high radiance, can provide accurate measurements with reduced exposure times, allowing for fast dynamic measurements.

Refocusing based on amplitude analysis in color digital holographic microscopy

A refocusing criterion adapted to red-green-blue (RGB) digital holographic microscopy is established. It is applicable for both amplitude and phase objects. This color criterion is based on a monochromatic criterion, using the integrated modulus amplitude. Simulated RGB holograms show the value of having color information, even for colorless samples; in addition, the position of the focus plane along the optical axis is determined more accurately. Simulations take into account both the numerical apertures of lenses and noise during the holographic process. We also implement an algorithm exponentially reducing the computation time required for detecting the focus plane. The method is validated on experimental holograms.

Lensless phase contrast microscopy based on multiwavelength Fresnel diffraction

We demonstrate a compact, wide-field, quantitative phase contrast microscope that does not require lenses for image formation. High-resolution images are retrieved from Fresnel diffraction patterns recorded at multiple wavelengths, combined with a robust iterative phase retrieval algorithm. Quantitative phase contrast images of living cultured neurons are obtained with a transverse resolution of <2 μm. Our system is well suited for high-resolution live cell imaging and provides a compact, cost-effective alternative to full-sized phase-contrast microscopes.

Femtosecond digital lensless holographic microscopy to image biological samples

The use of femtosecond laser radiation in digital lensless holographic microscopy (DLHM) to image biological samples is presented. A mode-locked Ti:Sa laser that emits ultrashort pulses of 12 fs intensity FWHM, with 800 nm mean wavelength, at 75 MHz repetition rate is used as a light source. For comparison purposes, the light from a light-emitting diode is also used. A section of the head of a drosophila melanogaster fly is studied with both light sources. The experimental results show very different effects of the pinhole size on the spatial resolution with DLHM. Unaware phenomena on the field of the DLHM are analyzed.